Make a table with a glass top with your own hands. DIY glass table - possible assembly options

• Advantages and disadvantages of glass tables in the interior
• Glass table IR in high-tech style with your own hands
• Glass table with forged legs

Glass tables, complemented, for example, with forged legs, are very elegant and sophisticated interior elements. However, how to make such a table with your own hands and, in general, is it possible to make it yourself? Answer: yes, it is possible. The following tips will help you make this piece of furniture with your own hands. However, before you get to work, remember that glass is a rather complex material. It must be handled with extreme care. The option “this will do” will not work in the case of a glass table. You will have to give up all your strength to do it for real worthwhile thing for your interior design.

Advantages and disadvantages of glass tables in the interior

In addition to the fact that glass is a “delicate material,” you need to know about its other advantages and disadvantages before starting to do the work yourself. So let's start with the benefits, because they are truly tangible.

1. This is a very stylish interior element. It will look good in almost any interior style, especially if you combine glass and forged legs.
2. Practicality. Modern glass tables are designed to be truly functional pieces of furniture, rather than simply serving as decoration.
3. Finally, such tables have high level perseverance. They are not afraid high temperatures, nor humidity. Yes, unlike wooden table, a glass table with forged legs can fit perfectly into the kitchen. In addition, it can be washed with any household detergent, which makes the table easy to clean.

The main disadvantage of a glass table made by yourself is that it is very easily soiled. There will always be fingerprints and other traces on it. That's why it will have to be washed very often. However, this disadvantage can be solved by replacing traditional glass with frosted glass of the desired tint.

In addition, if you decide to make a table with your own hands, do not forget about the high cost of materials. This is especially true if you want to combine glass with forged elements.

DIY glass table in high-tech style

The easiest way to make a glass table with your own hands is to use simple metal tubes and glass. The simplicity of this method is that all you need to do is glue all the elements together. You can buy a ready-made sheet of glass or cut the tabletop into any desired shape. Metal tubes can be purchased at a hardware store.

To make this piece of furniture in the currently fashionable high-tech style, you first need to choose the right glue. If you use standard option with glue for mirrors, then when it dries it will be visible through glass surface. Accordingly, this option does not suit us. Yes, and it dries this type glue takes a very long time, which is unacceptable in our case when there are no other types of fasteners.

This is why you should go looking for a special glue. It comes in two types: “glass-metal” and “glass-glass”. They produce such glue as domestic producers, and foreign, Polish and German glass glue is especially valued. Please note that glass glue dries only under the influence of a special construction ultraviolet lamp (a regular medical UV lamp will not work). You can rent such a lamp at a hardware store. Working with her is extremely simple. The glue completely polymerizes under the influence of rays in 30 seconds.

Glass table with forged legs

The combination of glass and exquisite forged metal can give any interior a touch of grace. home comfort. The fact is that openwork weaving powerful metal blends perfectly with the subtle elegance of glass. IN in this case It’s better to abandon matte countertops and choose an option with clear glass, because the beautiful forged legs should remain visible. In addition, so that a table with forged legs does not get lost in the design, it needs to be complemented with chairs in the same style. Of course, chairs do not have to be entirely made of forging. A couple of forged parts are enough.

In addition to beauty, such a table also has practical advantages. It is very stable, and thanks to its considerable weight, no one will be able to accidentally move it. And besides, forging opens up the widest scope for imagination. Find a good blacksmith and he will recreate any intricate ideas from your sketches.

A glass table in an apartment interior is often used as a coffee table. It can enliven the decor of a room and is appropriate in a small room, as it creates a feeling of weightlessness of the product. The simplicity of the design allows you to make a glass table with your own hands. It is distinguished by its hygiene, as it is resistant to detergents and cleaning agents. Using modern materials to make the table will be very practical and inexpensive.

Preparation of material and tools

The tabletop can be cut from transparent, frosted, textured, tinted glass or mirror cloth. Clear glass visually expands the interior of the room. A colored countertop can be an organic addition to the decor of the room. Dark color will create a “glamorous” style. Kitchen table with black glass, complemented by white chairs, will look impressive.

If you have no experience in making furniture, it is better to make a table with your own hands with a solid tabletop and metal legs. Having mastered the technology of working with such material, in the future you will be able to figure out how to make a table from glass of a more complex type.

For high quality workmanship table you will need:

• sheet of glass;
• metal legs;
• suction cups for attaching to the tabletop;
• wood glue for metal and glass;
• gloves and safety glasses;
• metal-glass glue, polishing paste.

Set of tools:

Tools for cutting glass: 1 - square; 2 - corborundum stone; 3 - compass for cutting glass; 4 - pliers; 5, 6, 7 - glass cutters.

• diamond or roller glass cutter;
• pliers with rubber pads;
• metal ruler of suitable length;
• grinder (grinder), drill;
• grinding discs, felt wheel;
• pencil for marking.
• file (emery block).

Glass should be purchased tempered, 6-12 mm thick. It must be clean and dry when cutting. On dirty material, the cut may be uneven. Having decided on the location of the homemade piece of furniture, plan its dimensions. Apply the accepted dimensions to the sketch. Mark the mounting locations for the legs.

Return to contents

Share on

Designers in modern world they resemble naughty kids who got their hands on a 3D multifunctional construction set with a guidance system - if such a thing exists. With the help of designers, earthlings unexpectedly found out that they live in a boring, gray environment and do not notice the bright opportunities provided by the achievements of progress. Some of their projects cause trembling and shock, while others cause nervous laughter.

For example, we would make a glass table with our own hands without the participation of these figures at all - simply out of a sense of self-preservation.

Today we will look at the nuances of making glass tables yourself

Now there are two ways to reliably build glass structures of any complexity, but none of them provides for the presence of completely sick experimenters.

Glass is a dangerous material in itself, so you shouldn’t turn a craftsman’s everyday life into a horror movie.

Frame method for assembling a glass table

In general, in principle, if you decide to cut out the parts of a glass table yourself, at home, only the frame method will suit you. There is no point in even taking on the implementation of a designer or personal idea about open glass - it will turn out obscene.

The frame method is simple by definition:

Cut into furniture panel hole the right size and shape, and then secure the raw glass in it with a glazing bead.

It’s not very beautiful, and it won’t be possible to install glass of normal thickness, but you can attach the tabletop like an ordinary chipboard part.

Modern mechanical fasteners are varied and give scope for creative imagination, but they themselves are not always pleasing to the eye.

Mechanical fastener for glass

Manufacturing a glass table using mechanical fasteners allows you to endlessly vary and even modify the assembled structures.

The main difference from the second method is the facet.

DIY glass table

Here it is needed.

Making a glass table in high-tech style

The high-tech style, in which the most popular models of glass structures are made, implies a metal-glass combination, and without the use of clamps protruding above the tabletop.

Accessories can be purchased at construction or specialized stores.

Table assembled using special glue

It includes a variety of supports, legs, combinations of couplings and headrests that provide a decent look to any structure - But!

This requires special glue.

Adhesive for glass structures

When we were researching the question “How to make a glass table with your own hands,” we stumbled upon a small problem. The glue used to attach the mirrors is visible through the transparent glass surface and takes too long to dry - which is unacceptable in the absence of additional fasteners.

However special types glue helped resolve this issue.

Russian manufacturers have adopted the experience of their Polish and German colleagues, and now produce quite decent glue of two types: “glass-to-metal” and “glass-to-glass”. Similar to other species special compounds, this one also has its own peculiarity - it polymerizes into ultraviolet rays length 300-400 nm.

An ordinary UV lamp for warming up the ear/throat/nose is not suitable here - you need to find out the characteristics from the sellers of the equipment.

In our region, we found a suitable device at a hardware store for only $26. The time required for the final “drying” of the glue depends on the power of the lamp - the initial gluing took us about thirty seconds.

Glass table detailing

We were extremely pleased with the quality of the glue - the connection is stronger than the material itself, that is, when you try to tear off the part, you will not break the gluing, but will break off a piece of glass.

If you decide to make a glass table with your own hands, take tempered glass 10-12 millimeters thick, and then you will need a bulldozer to dismantle the product.

With the second assembly method, we decided to completely abandon additional fasteners and make desk in the reception area, for which it is not a shame to seat an attractive secretary.

We will describe the detailing and assembly process of this table.

The entire structure is tightly glued - only the monitor stand is movable. The detailing is amazingly simple:

• 1600x700 mm – tabletop.
• 450x350 mm – top of the monitor stand.
• 350x80 mm – 2 pcs.

  Sidewalls of the monitor stand.

• 750x500 mm – 4 pcs. Table sides.
• 400x500 mm – 5 pcs. Shelves.

The thickness of the glass is 14 mm, the total weight of the table is about one and a half hundred kilograms, so there is no need to be afraid of thieves. Prestige – 11 points on a ten-point scale (the third secretary is going on maternity leave).

Attention!

The ends of the joining parts must be perfectly smooth and without bevel - otherwise the structure will come out crooked and unbalanced.

Other elements of the table should not have any sharp corners or cutting edges in principle - unless you want to open a branch of a blood collection point.

Table assembly process

In this case, no tools are needed for assembly - except for a tape measure and a marker.

All lines are marked on the outside of the joint - the surfaces to be glued must be perfectly clean and degreased.

It is impossible to assemble the cabinets alone - you need an assistant who will irradiate the gluing area with a UV lamp while you hold the parts in the desired position. We recommend wearing sunglasses - your eyes are not designed for such stress, although the process will not cause them any particular harm.

Glue the shelves to the sidewalls one at a time until they set, and then irradiate them until the glue is completely polymerized.

Please note that you will not be able to tear it off and redo it, so mark it carefully. Also pay attention to the coincidence of the edges of the structure. The glue is applied to the end of the part, and not to the plane: Excess can be removed sharp knife, but this work will not bring pleasure.

There are many answers to the question: “How to make a glass table.”

But before you ask this question, identify a few absolute truths for yourself:

• Glass does not tolerate neglect. The “And so it will do” option is good for misanthropes who have written a will in favor of world peace (if there are any). Never use thin glass, especially in areas where children are present. The cubs manage to crack shop windows - what do they need some kind of table?!
• You can see through it.

  Do not place a glass table in the living room if your friends have crooked legs - everyone present will lose their appetite.

• It's hard to see through it. This piece of furniture requires constant care. Fingerprints, dust, boogers or gum stuck to the countertop will become public knowledge.

  If you do not intend to create an art object in this way, come to terms with the need for constant cleaning.

Good luck to you.

DIY glass table - mounting options

How to glue glass to glass

How to glue glass to glass

Selecting glass adhesive

Polymerizing glue, which hardens under the influence of ultraviolet radiation and is designed for gluing glass, provides a strong connection, often transparent, which is important. Its main disadvantage is that at least one of the parts must be transparent to ultraviolet light, otherwise the glue will not harden and will not form a strong, uniform contact.

It is better to fix painted parts or elements made of colored glass with cyanoacrylate-based glue.

You can also use two-component glue with epoxy resin. The first option sets very quickly, within 20 seconds.

The less it will be adhesive layer for connecting parts, the better. Epoxy glue dries within one day and can create a significant layer without losing strength. Glue with cyanoacrylate is afraid high humidity. From contact with water, it begins to crumble over time, losing its properties and strength. Epoxy resin, on the other hand, is resistant to water.

In addition to the above products, you can use silicone-based hot melt adhesive or compositions like liquid nails.

However, for strength, such a connection requires a large layer between the bonded surfaces; this option is more suitable in cases where it is necessary to fix some decorative elements, not subject to significant load.

How to glue glass

For any glue, the preparation phase is the same.

The gluing processes may differ slightly, but not significantly. To begin with, the surfaces to be glued should be thoroughly cleaned of dirt and, possibly, remnants of old glue. Next you need to degrease them. To do this, use Galosh gasoline, alcohol in case of severe contamination, or soap solution or detergents for windows with acetic acid for minor stains.

When using glue with cyanoacrylate, it is advisable to clean the surfaces and, if necessary, level them for a tighter fit.

When using epoxy resin, it is advisable to make the surface rough at the gluing site. For example, you can go over it with sandpaper.

After this, a layer of glue is applied to the cleaned surface according to the instructions and the parts are pressed tightly so that they stick thoroughly. It is important that the bonded surfaces do not move until the glue has completely hardened. Exposure to ultraviolet radiation from lamps can have a detrimental effect on vision; you should use protective glasses or directional emitters.

To harden the polymerizing adhesive, it is necessary to expose the bonding site to ultraviolet light.

Experience shows that most often it is enough to expose the part to the sun. Otherwise it is used UV lamp With wavelength from 300 to 450 nm.

How to glue glass to glass

A material such as glass has a lot of advantages and one significant drawback - products made from it can be easily broken if handled carelessly.

And then it becomes topical issue– with what and how you can glue the glass so that the table, aquarium, window and other things can continue to serve you.

Many people think that this is very difficult task. In fact, the gluing process can be carried out even at home, the main thing is to know the technique, sequence of operations and some features. All this will be discussed below.

What glue is suitable for gluing glass?

When choosing an adhesive, the type of glass must be taken into account.

Properly selected adhesive largely determines the reliability and strength of the connection. If a pair of glass - glass or glass - another material is to be bonded, then the most acceptable adhesives are:

“Polyvinyl acetate” “BF-2” “Unicum” “Moment-1” “Phoenix” “Mars”

The compound obtained with their help will be colorless and waterproof, which in some cases is very important.

You can prepare the gluing composition yourself at home. To do this, add a little ash to the bone glue and mix thoroughly. This composition must be applied to glass that has been heated in advance.

2.

A good glue for a glass-glass pair can be obtained by mixing 10 parts of silicate glue with 1 part of casein glue.

3. If you need to glue glass and wood, then use the following recipe. Pre-screened wood ash added to wood glue and mixed well until a thick, homogeneous mass is obtained.

4. Small glass parts can be glued together with garlic juice.

DIY table with glass top

To do this, the surfaces to be glued are smeared with cut garlic cloves and connected. The layer connecting the parts remains transparent.

5. Sealants are most often used to repair window frames and aquariums. Here is a recipe for making and how to use one of them. 10 g of chopped beeswax, 50 g of chalk (powder), 100 g of rosin and about 60 g of drying oil.

The mixture must be heated until it boils, after which it should be removed from the heat and wait until its temperature drops to 50 ° C. Add 20 g of cement to the still warm mass and mix.

6. You can also make this composition. You will need aluminum powder - 50, dibutyl phthalate -10-12, and epoxy resin ED-5, ED-6 -100.

First, the resin is heated to 60-80 ° C so that it becomes fluid, then dibutyl phthalate is added, the mixture is mixed well and aluminum powder is added. All adhesive mixture is ready and must be used immediately.

In addition to the listed brands of adhesives and compounds, you can use others, the use of which can be advised by a salesperson at a building materials store.

He can offer you a special transparent glue specifically for connecting glass, as well as for reliable bonding various types glass products and surfaces at home.

How to prepare the surface for gluing?

The strength and reliability of the adhesive joint very much depends on the quality of preparation of the surfaces to be bonded.

First of all, the surface must be cleaned of grease and other contaminants.

To do this, wipe it with a swab dipped in one of the following solvents: kerosene, gasoline, alcohol, white spirit, solvent 646. It is believed that the most universal remedy for this purpose - acetone.

In stores and supermarkets selling household or building materials, you may be offered special means for cleaning, such as Bohle cleaner.

Conventional detergents, including Mister Muscle, are not suitable for preparing surfaces.

Please note that cleaning solutions are harmful to health, so the room should be well ventilated or ventilated during cleaning.

The gluing areas must be heated to remove a layer of condensation that is invisible to the eye.

The temperature of the surface on which the glue will be applied must be heated to a temperature 30° C above room temperature. You can use a hairdryer to heat it up. If the surface is problematic, then the Pyrosil technique can be used to warm it up.

How to glue glass?

After preparing the surface, you can proceed to the actual gluing.

First you need to check whether the parts fit together tightly. If there are many parts, they are assembled on the table like a puzzle.

Can make assembly easier various kinds clamps: magnetic cubes, stops, corner suction cups, etc. The parts must be connected immediately after heating. Viscous adhesives are applied to the parts before they are joined.

Glue should be applied in the minimum required quantity.

A dispenser can be used to apply measured volumes of glue. You can do without a dispenser by applying glue to the eye. The main thing is not to use too much glue.

IN Lately compositions that acquire maximum strength after ultraviolet irradiation have become widespread.

They are suitable for bonding glass to glass or glass to metal and provide very good connection. When using them, surface preparation and adhesive application are carried out as described above.

The difference is that after joining the parts, the seam is irradiated with light from a UV lamp. The dimensions of the lamp must be such that the adhesive seam is irradiated evenly.

Attention!

UV light may damage your eyes. When working with it, you must wear glasses and your hands are protected with gloves.

Depending on the composition and type of parts being glued, irradiation can last from 70 seconds to several minutes.

During irradiation, movement of parts relative to each other must be prevented. For fixation, you can use devices from Bohle.

After irradiation, the fixing parts are removed and any remaining adhesive is removed.

To check the strength of the connection, a force is applied to it, which it must withstand during operation. Of course, you can break any object - there is no need for excessive zeal here. A product that has passed the test is fit for use.

Precautionary measures!

Do not forget that any glass adhesive is highly toxic, which can cause irritation of the skin or even the respiratory system.

As a result, it is recommended to use special respirators, as well as gloves (protective clothing). If the glue does get on, for example, the skin or eyes, you must immediately remove the composition with a large amount cold water and if necessary, visit a doctor.

Keep away from sun rays and children!

How to glue glass to glass?

Glass products are very beautiful and practical, but they have a significant drawback - fragility.

Having broken your favorite thing, you can not rush to get a new one, but try to glue the glass together. How to glue glass to glass - read this article.

How and how to glue glass to glass

To glue glass together, it is better to give preference to glue such as BF-2, Moment 1, Unicum, Mars, Phoenix or Polyvinyl acetate.

1. Before work, you must first prepare the surface of the glass: clean it from grease, dirt and stains.

   Any of the following substances is suitable for this purpose - acetone, gasoline, kerosene, alcohol or solvent. You can also use a commercial cleaner to remove dirt. During the procedure, use protective rubber gloves. After work, thoroughly ventilate the room.

2. After the surfaces to be bonded have been prepared for further work, the glass needs to be heated.

   To do this, you can use a regular hairdryer.

3. Then apply a small amount of the selected glue to both surfaces and glue the product together.

Recently, these types of adhesive compositions, which acquire strength after irradiation with light from a UV lamp.

That is, after joining the parts, the seam must be irradiated with ultraviolet light for several minutes. During the procedure, you must follow safety precautions: wear protective gloves and special glasses.

In addition, you can prepare the glue yourself: mix silicate glue ( liquid glass) And casein glue in a ratio of ten to one.

Also, in addition to glue, glass sealant is often used in the work.

It is usually used for windows or aquariums. To obtain the mixture, you need to mix ten grams of crushed beeswax, fifty grams of powdered chalk and drying oil and about one hundred grams of rosin. Then the resulting mixture must be heated and after cooling, add twenty grams of cement.

And people widely use garlic juice to glue small glass fragments together.

Do you want to diversify your interior without extra costs? A DIY glass table is a great idea. A unique product will update the interior of the room. Certainly, self-production furniture cannot be called simple matter, but the result is worth it. And such a product will cost much less than a purchased one. Today's article - detailed description process of making a table with glass table top.

Design Features

The most popular are products with a monolithic countertop. But there are also transformable tables, with the possibility of extending the tabletop. The form may be different:

• Round.
• Oval.
• Rectangular.
• Square.

Glass can be regular, transparent, frosted or tinted:

• Transparent design is an excellent solution for small rooms. It creates the impression of soaring, grace and lightness.
• Matte countertops often have a greenish tint. This is the natural color of glass.

Important! Colored material attracts attention, first of all, with its unusualness and non-standardity. For example, black glass is a great addition to a gothic or modern style. It will look great with chairs made of white metal or plastic.

To make the underframe, chrome-plated metal or wood is most often used. The wicker table looks good forged metal or durable high quality plastic. If the tabletop is made with a frame, then the frame should be made of the same material as the underframe.

DIY glass table - advantages and disadvantages

The advantages of glass tables include:

• Beautiful appearance. This product looks stylish and beneficially transforms the interior.

Important! Glass fits especially organically into the concept modern styles— High-tech and Minimalism.

• Practicality. Thanks to modern technologies, there are high-strength types of glass. Furniture where the glass is covered with a special film is also safe. Even if it breaks, the tabletop does not fall apart. The fragments are firmly glued to the film.
• Persistence. The material is resistant to high humidity and significant temperature changes. It is chemically neutral towards aggressive substances. Glass does not absorb grease and dyes. This compares favorably with the usual countertops made of wood, MDF and chipboard.

However, there are also disadvantages:

• Fingerprints and traces of dirt are clearly visible on the surface.
• If you place dishes on it, it makes quite a loud noise.

Important! Compared to the advantages, these disadvantages are not at all critical:

• The matte surface makes fingerprints invisible.
• The use of special care compounds allows you to maintain products in impeccable condition.
• The noise problem is also completely solvable. It is enough to purchase special stands for dishes.

DIY manufacturing technology

Let's look at how you can make a beautiful glass table yourself.

Preparation

First decide where new item the furniture will stand as long as you intend to use it. For example, as coffee table or for eating. Take all the necessary measurements, draw the product to scale, indicating the location of the legs and the size of the tabletop.

To make a glass table with your own hands you will need:

• Glass cutter - roller or diamond.
• Long metal ruler.
• Hammer with rubber striker.
• Pliers equipped with rubber pads (for breaking glass).
• Bulgarian.
• File or emery block.
• Turpentine or kerosene.
• The glass itself. It’s up to you to decide which option to choose – transparent, textured, tinted or mirrored.

Important! It is advisable to use high-strength hardened material with a thickness of 0.6 to 1.2 cm to make the tabletop.

The main thing is that the glass is dry and clean. It is best to remove dust using soft textiles and soda solution. Such preparation will not be superfluous, because dirty glass can break away from the cut, and the tool quickly fails.

Opening the glass:

• Place the prepared glass on a table or plywood sheet.

Important! Make sure that the material is adjacent to the surface with its entire plane.

• Place a thin rod (about 3 mm in diameter) under the cut line.
• Place a ruler on the glass so that it is located 2-3 mm from the cut line.
• The optimal pressure force on glass is 2 kg - this can be easily checked with ordinary scales.

Cutting Features

It is best to cut glass using a thin metal ruler. Masters highly qualified cut the material by eye, according to the markings previously made with a marker or along the edge of the table.

Important! If you don't have great experience When cutting glass, it is better to first practice on scraps. This is not that difficult and will take a little time, but the chance of cutting the material flawlessly will increase significantly. Try to draw only one cutting line.

The glass is broken off with hands wearing protective gloves. At the same time, position the glass so that the cutting line and the edge of the cutting table coincide. Press the glass with a sharp movement and it will break off along the cut line.

Important! If there are any sharp edges or glass debris left, remove them with rubber-lined pliers. For greater efficiency, place paper folded in several layers under the jaws of the pliers.

If the glass is curved, mark it using a stencil and use a glass cutter to follow the line. Use the same principle to make a round cut. To unnecessary glass it was easier to break off, make special “rays” and break off in parts.

Edge processing

Even if you worked with the utmost care, there are sharp “teeth” and protrusions along the edge that must be removed. Certainly, best option for processing glass edges - this is special machine. But manual processing is also quite effective:

• Work only in cotton gloves.
• Use a file or abrasive stone to file the edge.
• Be sure to moisten the file with turpentine or kerosene.
• To ensure smooth edges, move the file or block evenly along the edge.
• Use a drill with attachments or a grinder to sand and polish the edge.
• The grinding speed should be low (1200-1700) rpm.
• Grain sandpaper change from coarse to smallest.
• Polishing - The final stage. Do it with a felt circle, using a grinder or drill.

Return