DIY metal sun lounger. Making a wooden sun lounger with your own hands

Camping is a great way to relax. Some go to the village, others to the country, where comfortable sun loungers await them, allowing them to forget about the environment and take a little nap. Such attributes relieve tension from the spine and almost all muscles; you just have to choose the most comfortable option for yourself: a rocking chair, a regular folding chair or a lounger.

The easiest way is to buy a ready-made chaise longue, choosing it to match the interior of the dacha or to suit your individual needs. But not everyone has the financial means to do this. A handmade model is more valuable and fully suits the taste of its owner.

Kinds

Create homemade sun loungers is not difficult. Before starting work, you need to choose the type of furniture you want to bring to life. There are several of them:

Armchair. As a base, you can take elements from a crib or cot. Armrests are made upon request.
Sun lounger. The creation process takes about four hours. The product can be made of plastic or wood, which is ideally sanded and varnished.
Rocking chair. Its back is at an angle, so it is possible to lie down, relax, and take a nap. At the same time, it is important to make the bottom of the attribute strong so that it does not become loose when swinging.

In addition to the distribution of products by appearance, there are variations in the types of structures:

Monolithic. When it is created, all elements are fastened together, so disassembly is impossible. This chaise lounge is strong and durable, but the backrest is not adjustable and the product as a whole does not fold. As a result, problems may arise with its transportation.
Portable. The reliable and compact folding attribute has a special mechanism that allows you to easily adjust its position.
Soldered with inserts. This practical product will decorate any interior thanks to its attractive appearance. But inserts made from other materials do not guarantee durability.

If the chaise lounge is made from durable materials, it can be supplemented with a blanket, pillows and other items for comfortable rest.

Possible materials

When choosing the material for making a sun lounger, you need to take into account its location. It could be country cottage area, beach, special place by the pool or even at home. The following options exist:

Wooden. This design is durable, comfortable, environmentally friendly, and differs in shape and appearance. The only drawback is the heavy weight. To make it easier to carry the chaise lounge, wheels are attached to the legs.
Plastic. The products are lightweight, inexpensive, and easy to care for. One of the negative aspects is its fragility.
Fabric. The attributes are convenient and compact. The frame can be made of boards, metal, profile pipe.
Made from rattan. Against the backdrop of nature, such sun loungers look incomparable. They are environmentally friendly, but expensive. If you have the skills to weave, it’s easy to make such an attribute for relaxation.
Made from PVC. The same lounger with a fabric base, but the frame is based on PVC pipes.

Making a sun lounger yourself is not difficult; you need to correctly determine the dimensions of all the elements and spend several hours assembling them.

Manufacturing diagram of various options

Before you start making a recreational attribute, you need to draw its diagram. She plays important role, because it determines the dimensions of the elements for the product, their shape, quantity and other details. You can make such a scheme yourself, but not everyone can do it. Therefore, we will give an example of such a scheme. Quality sun lounger(fabric) will be obtained according to this drawing with dimensions.

All that remains is to find the materials to create a lounger. There are also other drawing options different types sun loungers.

From a wooden lattice

This chaise lounge is quite durable, reliable, and its backrest is adjustable. For such a model you should take wood slabs from coniferous trees, as they are resistant to climate change. Here is a diagram with the indicated dimensions:

All work is carried out in stages:

A frame is created from bars, it is fastened with metal corners.
TO outside boards are attached, and legs are attached to them.
The slab is sawed using a jigsaw and a wooden lattice is made.
The adjustable backrest is separated from the main part of the attribute and secured to it with a door hinge.
A fastening strip is attached to the headboard area, and a stand is attached to it with screws.
The finished product is sanded and varnished.

If the lounger will often move from one place to another in the future, it is better to attach wheels to its legs, because the weight of the attribute itself will be considerable.

Fabric on frame

Work on the frame occurs in the following order:

A ready-made base is taken from a cot or crib. If this is not available, slats of the required length are taken or cut and sanded.
Holes are drilled in the main frame, the other is equipped with cutouts (4 pieces) to adjust the backrest tilt.
Holes are made at both ends of the slats to install the seat.
Circular cross members lubricated with glue and installed in the holes.

Now you should prepare the seat itself. To do this, you need to fold the base of the product and measure out a piece of fabric. It should sag to accommodate the owner comfortably. On sewing machine All edges are processed. Then the cloth is wrapped around the transverse round crossbar and nailed on both sides with small nails. The attribute is ready and you can enjoy your vacation.

From pallets

This is the easiest option for creating a sun lounger. This product is light in weight (easy to move to different places) and practical (you can put a mattress on it for more comfort). The work occurs in the following order:

Pallets are dismantled, all the nails are pulled out.
A frame is made from two even boards. They are laid edgewise and parallel to each other, and the rest are sawn in half and attached to the base. The result is a seat with two support legs behind.
To create the front legs, a board from a pallet is sawn into two equal parts. Next, using bolts, they are screwed to the base of the seat and tightened with nuts and washers. A cross bar is necessary to strengthen the legs.
The back is created from two boards, which are connected to the seat frame using bolts, nuts, and washers. This should be done under equal angle. After that on support boards The boards for the back are attached with screws. Behind it, a block is attached to the rear legs - this is necessary for the strength of the structure.

The final step is to sand the attribute with an emery sheet.

To prevent the boards from rotting, the product is varnished.

Made from polypropylene pipes

The design of such a chaise lounge is identical to the fabric one, only wooden frame here replaced by polypropylene pipes. To create the product, you need 2-inch pipes, fittings in the form of the letters “g” and “t”, 8 and 6 pieces, respectively. The assembly process has several stages:

First, a vertical bar is made. Take a T-shaped connector and use it to fasten 30 and 45 cm pipes. L-shaped fittings are put on the ends. The lower vertical is also fastened and the two sides are connected.
Important point: the horizontal crossbar must be solid and have a length of 66 cm. It is mounted closer to the connection with the letter “T”, which must be directed towards the inside of the structure. The other side is two 30 cm pipes, fastened with a T-fitting. This tee must be rotated 45 degrees from the oblong side. The final result is a rectangle.
For a rotating seat, a 5-centimeter pipe is inserted into the triple connecting element, which is secured with the same part. This will be the basis of the horizontal frame.
The long sides of the horizontal frame are made in the same way as the vertical ones. For the crossbars, take a tube 30 cm long and another, consisting of 2 x 20 cm with a tee fitting. The result is a rectangular figure within the same figure.
The seat will be between a short section horizontal section and oblong vertical. After adjusting the tilt level, a support is inserted at the back.

The frame is ready, which means that a fabric base is now needed. To do this, take a thick canvas and attach it to the base.

"Kentucky"

This leisure attribute has a number of advantages: compact, convenient, easy to fold, light weight, durable and reliable, and takes up little space when folded. In appearance it resembles a chair with a high back. Unusual way the assembly looks original. To do this, you will need bars, galvanized wire (diameter 4 mm) and the same brackets for fixing the wire (16 pieces), wire cutters, and a hammer. The process goes like this:

A protective coating is applied to the bars. But the parts must already be ready for assembly.
Holes are made. However, they should be a couple of millimeters larger than the wire.
The bars are assembled in an interesting way, which makes the whole design look creative. Here is the diagram:

At the end of the entire process, the chair carefully rises and unfolds. This folding product looks stylish and modern.

Original ideas

People with creative thinking do not always want to see simple sun loungers on their territory, so there are several original ideas creating models for recreation.

From birch logs

This design has unusual look, so you have to work hard. For such a lounger you need birch logs with a diameter of 75-120 mm. But you need to take into account that the larger the diameter of the chocks, the more the finished product will weigh. Before you start, you should stock up on the following tools:

electric saw;
drill;
set of drills;
self-tapping screws;
staples.

When arranging a place to relax near a private house, it is impossible to do without a sunbed. This is where the ability to make a comfortable lounge chair with your own hands will come in handy. It is a folding lounge chair on which you can sit in a reclining position.

Sun loungers come in metal, plastic and wood. Often these materials are combined with strong textile inserts, or complemented with light pads in the form of pillows and mattresses.

When you decide to make a chaise longue for your dacha with your own hands, choose wood as the material of manufacture. It's easy to use. A completely wooden lounger will be reliable, strong, and will last you for a long time. A detailed description of how you can make a sunbed with your own hands, diagrams, design drawings and photos will help you avoid problems at work.

Lounge chair for relaxing in the garden or by the pool

On such a chaise longue for a summer residence, it is convenient to sit in the shade of plants while reading a book or take a place in a sunny meadow to get a beautiful summer tan. Despite the fact that this is a very simple design, the lounger can be installed in three positions: completely horizontal or with two options for raising the backrest. Moreover, one of the simplest designs is used for lifting. But it is known that the simpler the mechanism, the less susceptible it is to breakdowns.

Even an inexperienced craftsman can make such a chaise lounge with his own hands. It will have convenient parameters even for an adult tall man: width – 60 cm, length – 215 cm.

Materials and tools

The material from which we will make the lounge chair will be pine beams and boards. Their dimensions, along with a list of tools and fasteners, are presented in the list:

3 bars 4000x100x50 mm;
4 boards 4000x80x25 mm;
2 studs for attaching the back to the frame;
drill with drills;
self-tapping screws;
sandpaper;
wood putty;
paint (color of your choice);
wood glue to strengthen fixed joints;
roulette;
square;
marker;
saw or power saw.

Description of work

Before starting work, carefully examine similar drawings to understand the logic of subsequent actions.

First of all, we assemble the frame from the timber. We take 2 parts of 2150 mm each and the same number of 500 mm each. We make connections using a drill using self-tapping screws. To increase reliability, pre-coat the joints with glue.
Let's start working with the stationary part of the surface. We cut a board with dimensions 4000x80x25 mm with a saw into 60 cm pieces. In total, 13 such parts need to be made.
Leaving centimeter gaps between the boards (60 cm long), we fasten them to the frame with self-tapping screws. We control the angle of connection of the planks at 90 degrees.
Let's start installing the legs of the chaise lounge. For greater stability, the legs in the seat area should be made double. For them, we take 4 bars 35 cm long. We glue them in pairs, then fasten them to the base with glue and self-tapping screws. Any excess adhesive should be wiped off immediately. This will help in the future to avoid problems with processing these areas of wood.
On the side of the headboard we also attach single bars-legs 35 cm long. Then we attach second bars to them, which are 20 cm shorter than the first ones. We fasten them so that the lower edge of the parts coincides (as shown in the figure).

Let's start creating the back of the chaise lounge. The frame of this part will be assembled from pine beams measuring 100x50 mm. Prepare 2 parts of 880 mm and 3 parts of 390 for the back frame.

The dimensions of the backrest base are chosen so that it can fit inside the main part of the chaise longue (with small gaps for free movement).

Back covering. If you want to give the product a more attractive look, attach the trim strips in the direction of the length of the frame. In this case, round the top edge of each board on both sides. Maintain a distance of 10 mm between the slats.
To secure the backrest to the frame so that it can move freely, you need to prepare the holes. Measure 70-80 mm from the edge last board seats. At the indicated distance, use a drill to make holes that pass through the frame of the backrest and chaise lounge. Place a pin in them on each side.
The mechanism for raising and fixing the moving part is based on placing bars in special recesses that will not allow the backrest to fall down. The first selections should be made on both sides of the main frame of the sun lounger, retreating 7-8 cm from the hairpin. The dimensions of the recess should be 10 cm wide and 5 cm deep. We make the second recesses at a distance of 20 cm from the first, 5 cm deep and 5 cm wide.

If you place the first support bar, 60 cm long, horizontally in the first recess, the back of the chaise lounge will lock into the “chair” position. The person sitting on the chair will be able to sit comfortably. To change the level of raising the backrest, you should move the first block onto the shortened legs, and insert the second support block (60 cm) vertically into the second recess. You can fully unfold the chaise longue by removing the second bar and lowering the backrest. In this case, the small frame will stand on the first block placed on the shortened components of the legs.

Finally, start finishing the chaise lounge. Use putty to smooth out any uneven surfaces and hide the screws. After drying, sand the corners and surfaces with sandpaper so that there are no sharp parts, burrs or roughness. Cover wooden product stain, this will protect the material from harmful influences. Paint the lounge chair the color of your choice.

The garden chaise lounge for the dacha is ready. You can equip it with a picturesque corner of your garden plot and enjoy a pleasant holiday.

Compact sun lounger: comfort wherever you want

A folding chaise longue, of course, cannot be called a sun lounger; it is more like an armchair. But the product has a number of other advantages. The design is very simple, so making it yourself will not be difficult.

The chaise longue is light in weight and compact, so you can easily move it to a new place. And if you show diligence in your work and care when choosing materials, the product will serve you for a long time. personal plot dachas for more than one year.

What do you need to make a folding lounge chair?

Before starting work, prepare:

For the back frame: 2 parts – 1219x38x19 mm, 1 – 610x38x19, 1 – 648x38x19, 1 – 610x64x19.
For the seat frame: 2 parts – 1118x38x19 mm, 4 – 603x38x19, one – 565x38x19 mm, one – 565x64x19 mm.
To support the back: 2 parts – 381x38x19 mm, wooden dowel with a diameter of 12 mm and a length of 648.
2 pieces of thick fabric, 1372x578 mm each.
2 wooden dowels with a diameter of 12 mm, length - 559.
4 bolts with nuts 50x6 mm.
12 washers.
Screws 50x4 mm.
Glue.

Work sequence

The joints must be additionally glued. After pressing the parts, immediately remove excess glue.

Consider in detail the drawings and diagrams with the dimensions of the chaise lounge. They will help you understand the principle of its folding.
Drill pilot holes, then countersink them for screws.
Assemble the frame for the back of the chaise lounge. Attach the bottom bar 50 mm from the bottom edge. Leave a distance of 10 mm between the 610x64x19 mm strip and the top piece to secure the fabric.

Assemble the upper part of the seat frame in the same way as the backrest. First bottom bar attach 203 mm from the bottom edge of the side strip. We fasten the next 3 boards with a gap of 13 mm from the previous one.
We connect the frames of the seat and backrest by tightening them with bolts and installing washers under the bolt heads. We also place washers between the frame posts.
We use bolts and washers to secure the support strips for the backrest.
We place the round dowel on the glue in the drilled hole of the planks without gaps.

It's time to make a fabric seat. We put 2 pieces of fabric together with the right sides inward, stitch them, retreating 60 mm from the edge. On one side we leave a section of about 100 mm unsewn.
We turn the workpiece inside out and sew the sides along the length.
We lay cavities (for wooden dowels) along the width on both sides and stitch them.
We thread the dowels through the long holes of the fabric.
After completing the finishing work with wooden base(grinding, coating protective agent, painting) place the seat in place.

A folding chaise lounge for your dacha is ready. Drawings and images helped create a practical, comfortable, lightweight chair for outdoor recreation.

It’s quite easy to make a sun lounger or deck chair with your own hands. Such a homemade, simple garden accessory is not only functional, but will also become a real decoration. local area. These unique folding beds differ not only in size, but also in appearance.

Chaise longue is a popular folding lightweight chair for relaxing in a reclining position. Such beach structures are easily transformed. A simple wooden accessory can be an excellent option not only for the beach and outdoor pools, but quite often used as garden furniture , replacing a comfortable and practical chair with open verandas or terraces. There is both an adult and a children's version of the chaise lounge, which is made from solid wood, durable plastic, durable aluminum or synthetic fabric.

Depending on the design characteristics, There is the following conditional classification of such products:

monolithic chairs, represented by components fixedly connected to each other, with high level strength and designed to withstand significant loads. The special feature is safety. The disadvantages include the inability to fold the structure and make changes to the angle of the backrest, which complicates the process of storage and transportation;
monolithic chairs with special inserts, characterized by very high levels of decorativeness. They have additional fragments made from various materials, which can negatively affect the level of reliability and strength of such a structure;
portable models, characterized by the presence of special mechanisms, make it easy and simple, without much hassle, to change the position of such a chair for relaxation. There is also an excellent opportunity to change the angle of inclination on the footrest and headrest. The folding model is very compact and suitable for transportation in a regular car.

Types of sun loungers (video)

Models with a metal base are extremely rarely made independently and are distinguished by the presence of aluminum or steel frames with fixed durable fabric panels. The advantages of such chairs include low weight and mobility., as well as a high degree of comfort during operation. Among other things, modern materials are characterized by a high level of resistance to various adverse conditions. external factors, as well as pollution that can be obtained during operation.

How to make a wooden sun lounger with your own hands: drawings and stages of work

Drawings and diagrams for making a wooden sun lounger are presented in large quantities, but to make such a design yourself, you can also use a simple step by step instructions.

Master class on making a Kentucky chair

A very original model is the Kentucky version, entirely assembled from wooden blocks. This chair can be folded and is very convenient to store. To make your own you will need to purchase:

galvanized wire with a diameter of 0.4 cm;
sixteen galvanized staples;
hammer and wire cutters;
fine-grained sandpaper;
bars wooden sizes 50x33 mm;
antiseptic composition and wood varnish, as well as a brush.

It is not difficult to assemble the structure yourself. Holes are drilled in the bars with a diameter one and a half millimeters larger than the thickness of the wire used. If necessary, you can replace the staples and wire with galvanized studs, the edges of which are secured with nuts and washers.

A simple option for making your own wooden sun lounger

This option is easy to manufacture, but quite bulky and does not allow you to change the position of the backrest. Before you start making your own, you need to decide on the dimensions of the structure. The optimal length of a sunbed is considered to be two meters with a width of 0.6 m.

The main stages of making a wooden sun lounger model are as follows:

manufacturing a frame base for a sun lounger from four sidewalls, a pair of which are two meters long, and two of which are 60 cm long;
covering the outer part of the frame with sanded boards, 2.5 cm wide;
fixing four legs on the long sidewalls with a distance of 80 mm from the edge of the structure using galvanized self-tapping screws;
It is best to use stable legs for making lounger legs wooden blocks 100 mm long.

On next stage The lattice is assembled, which represents the main part of the outdoor lounger. With help electric jigsaw from wooden slabs it is necessary to cut boards measuring 10x60 cm. All jagged and rough surfaces on wooden workpieces must be removed using fine sandpaper. Ready boards are fixed using galvanized self-tapping screws onto the frame base of the sun lounger and with a gap of one and a half centimeters, which will allow you to obtain a comfortable and attractive product.

Models with a comfortable adjustable back are somewhat less common. In this case, the lattice should be divided into a pair of parts, one of which is used directly as a lounger, and the other part serves as a comfortable headboard. The two parts are installed on connecting boards, and standard door hinges of the required size are used to fasten the lattice elements. To fix the headboard in a certain position, a transverse bar is used, which is installed on the inner edge of the frame base of the structure. The headboard support post is attached to such a bar using galvanized self-tapping screws. Ready design it is necessary to sand thoroughly, and then cover the surface with drying oil-based compounds or special varnishes.

How to make a sun lounger from solid wood (video)

How to make a folding fabric chaise lounge with your own hands

One of the most convenient and easy-to-make options is a fabric seat on a frame base. This model is quite mobile and can be transported from place to place, as well as easily fold to an almost flat state. The following materials are used in production:

furniture bolts and nuts D-8mm;
two round wooden slats 65 cm long;
two round wooden slats 50 cm long;
rectangular slats 65 cm long with a cross section of 25x60 mm;
a piece of durable and water-repellent fabric measuring 200 x 50 cm.

You will also need to purchase a round file and fine-grained sandpaper, as well as PVC glue. Experts recommend giving preference to slats made from wood species such as oak, beech or birch. As a durable and reliable fabric, we use types that are maximally resistant to abrasion and characterized by increased strength indicators. Mattress teak, as well as tarpaulin, denim and camouflage fabric, and canvas have proven themselves to be the best.

Manufacturing technology of a folding fabric model:

cutting slats of standard length and thoroughly sanding their surface with sandpaper;
holes are drilled at a distance of 0.7 and 0.4 m from the corners, after which they are polished with a round needle file;
In order for the position of the backrest to change during operation, three or four cutouts must be made with a distance of 8.0 cm;
With a sufficient distance from the two ends of the wooden slats, holes are drilled for arranging the seat;
The end part of the round wooden slats is greased with PVA glue and installed in the drilled holes.

The assembly of the frame ends with the installation of a fabric seat. The seat is sewn after measuring the finished frame. The crossbars are wrapped around the cut edge and secured using standard furniture nails. Loop fastening of the fabric seat to the crossbars is also allowed.

Buying a ready-made sun lounger: characteristics of types and selection criteria

Today, a chaise longue is a very popular and in demand product, mainly as comfortable and beautiful garden furniture. All modern sun loungers or deck chairs are divided according to the material used in the manufacturing process. Significant amount models are made of reliable and high-quality plastic, but there are also products made from processed wood and modern metals. Various combined models are especially popular, in which the frame base is made of wood or steel pipes, and the seat is made of wood or fabrics. Some loungers have wicker parts based on artificial or natural fiber.

Factory products made from modern plastics different color, are resistant to negative external influences, including ultraviolet radiation, precipitation and wind. Wooden factory products are characterized by surfaces that have undergone a three-stage treatment, represented by priming, subsequent painting and decorative finishing, which allows you to use such a chaise longue in conditions of high humidity, under open air.

All manufactured products are divided into folding and non-folding models. and also have a raised or lowered footboard and headboard. As a rule, the position of the backrest is changed using grooves located on the supporting frame. For example, the Lucca chaise longue from German manufacturer, is made on the basis of aluminum and modern textiles, and the position of the backrest can be adjusted without getting up from your seat by loosening the locking levers located in the access area.

IN last years Country property owners are increasingly giving preference to a comfortable and very original type of chaise lounge - the Duchesse Breeze. This modern model is a design represented by a very roomy and deep chair, with a comfortable attached stool, which can be placed next to the main part or secured by fastening. The lounger can be folding, transforming into comfortable armchair or a chair that is convenient for transportation. The most modern models They have a raised and lowered footboard, as well as a retractable sun screen, transformable armrests, and spacious compartments for storing various accessories.

How to make a sun lounger from a barrel (video)

Wooden sun loungers or deck chairs are not only very comfortable for summer holidays, but can certainly become a decoration for any backyard area. Despite the fact that the cost of such a product is quite affordable, in recent years, country property owners are increasingly making sun loungers on their own, which allows them to get a bright and stylish, very individual and durable design with minimal time and effort.

A simple chaise lounge made of wood. How to make a sun lounger with your own hands, photos, diagrams, drawings of a sun lounger, video.

A chaise longue is an indispensable attribute of garden furniture for summer relaxation on the banks of a river or in the country. You can make it yourself; in this article we will look at the process of making a simple and practical folding sun lounger.

The design is quite simple; making a folding chair or chaise longue is not difficult.

How to make a sun lounger: drawings.

The picture shows a drawing of a folding chaise longue; if necessary, the dimensions can be changed slightly.

1 – rail 20 x 50 x 1300 mm – 2 pcs.

2 – rail 20 x 50 x 1930 mm – 2 pcs.

3 – rail 20 x 50 x 590 mm – 2 pcs.

4 – rail 20 x 50 x 580 mm – 1 pc.

5 – rail 20 x 40 x 520 mm – 2 pcs.

6 – rail 20 x 40 x 560 mm – 2 pcs.

7 – fabric 530 x 1400 mm – 1 pc.

8 – screw M8 x 50 – 4 pcs.

9 – screws 6 x 45 – 2 pcs., and 6 x 60 – 8 pcs.

Scheme of a folding chaise lounge.

How to make a sun lounger: materials and tools.

To make a sun lounger you will need hardwood: - birch, oak, yew, walnut, ash, beech, pear, elm or white acacia.

Hard wood is more difficult to process, but the chaise longue will be durable and will last you for quite a long time.

You will also need wood glue to attach the groove joints.

Tools you will need:

Wood saw.
Drill with drills.
Chisel.
Hammer.
Sandpaper.
Screwdrivers.

How to make a sun lounger.

We saw off the slats to the required length according to the drawings; it is advisable to round the edges of the slats. We sand the slats with sandpaper.

The figure shows frames “A” and “B” and the backrest tilt adjuster “B”.

We assemble the frames. We fasten the slats together with groove joints using wood glue; the joints must be strong and not wobble.

On frame “B” we cut out grooves to adjust the tilt of the back of the chaise lounge.

We drill holes for fastenings; the diameter of the holes for bolts is 8 mm.

We connect frames “A” and “B” with screws through the holes, then we connect frame B.

We assemble the frame.

We try on the fabric, stretch it, wrap it on the crossbars and stitch it by hand or with a sewing machine.

The chaise lounge chair is ready!

Making a sun lounger video.

Main advantages

In terms of their functional purpose, chaise lounges are the same chairs, but more stable and with a low seat. You can relax in them in a semi-lying position, which allows you to relax your spine and all muscle groups as much as possible.

The undeniable advantage of sun loungers is their comfortable shape. The garden chair can be folded in such a way that it can be used for sitting or lying down, depending on the person’s personal preferences.

Traditionally, deck chairs for summer cottages are made of wood, because since ancient times it has been considered the most environmentally friendly, economical and easy-to-use material.

Sun loungers are ideal for observing nature as they are light weight and very comfortable. Therefore, it is not surprising that many owners install them in their gardens or dachas. Such furniture can stand outdoors throughout the summer, and winter period it can be put away in some suitable room, for example, a pantry.

Most often, garden beds are made from materials such as:

tree;
plastic;
rattan.

If you don't want to waste time and effort on self-assembly garden lounger, you can always order it at furniture showroom.

Types of structures

If you have finally decided to start making a sun lounger for yourself, then first it won’t hurt you to get acquainted with the main types of sun loungers for your dacha. There are quite a lot of them, so only the most popular ones will be discussed below:

These are just some of the sun loungers that you can purchase for your summer cottage. If you wish, you can make your own chaise lounge in the form of a swing, and also using ordinary tree branches as material. It all depends on your preferences.

Making a wooden sun lounger

First, you need to prepare a certain set of materials and tools that you will need to make a homemade sun lounger:

self-tapping screws;
jigsaw and screwdriver;
boards for covering the frame, 2.5 cm wide;
timber 40x40 mm for the frame;
corners for fastening boards (4 pcs.); wooden slabs 20 mm thick.

When going to the store to buy boards and slabs, we advise you to choose material made from softwood. He tolerates it much better Negative influence precipitation and has a wonderful aroma.

Stages of work

Now that you have everything you need prepared, you can proceed to assembling the wooden lounger.

You should first decide on the size garden chair. you can use finished drawing or create it yourself. Typically standard sun loungers measure 60 x 200 cm.

Now you can start making the frame. For it you will need bars, from which you need to make four sidewalls - two of them should be 200 cm long, and two more should be 60 cm long. The finished sidewalls must be subsequently connected to each other using fastening corners.

WITH outside the frame must be sheathed with a board 2.5 cm wide.

We take the long sidewalls and attach 4 legs to them, having first stepped back 8 cm from the edge. The legs can be made from beams 10 cm long. We use self-tapping screws to attach them to the frame.

Having finished making the frame, we begin to assemble the lattice. For it we need wooden slabs, from which we need to cut boards measuring 60 x 10 cm using a jigsaw.

We attach the boards to the chaise lounge frame using self-tapping screws. Be sure to leave a gap of about 1.5 cm between the boards. Then the lattice of the sun lounger will look neat and beautiful.

If desired, you can make a chaise lounge with an adjustable back. In this case, the lattice must be divided into two parts. One of them will serve as a lounger, and the other as a headboard. We mount both parts to the connecting boards. To securely connect elements, it is best to use door hinges.

So that the headboard can be fixed in a certain position, a transverse bar should be added to the frame structure on the inside. You need to attach a support post for the headboard to it using self-tapping screws. If you don’t have one, you can buy it at any hardware store.

Now that your homemade sun lounger ready for the dacha, all that remains is to sand the boards, cover them with drying oil or special paint and varnish material for protection against moisture.

Making a fabric lounger

If for some reason a wooden folding lounge chair is not suitable for you, then you can try making a fabric lounge chair instead.

Materials and tools

To make a chaise lounge from fabric material you will need the following:

bolts with nuts 8 mm;
piece durable fabric 200x60 cm;
round slats 2 cm thick (one strip 700 mm long, two 650 and two 550 mm);
rectangular boards 30x60 cm thick (two boards 1200 mm long, two 1000 mm long and two 600 mm long);
sandpaper.

To make a frame lounger, it is best to use tarpaulin, camouflage or denim fabric. They have sufficient strength and are resistant to wear.

Algorithm of actions

Now you can proceed directly to assembling the fabric lounger.

As you can see above, making a chaise lounge for a summer house from fabric is no more difficult than a similar lounge chair made from wood.

Buying a garden chair

Perhaps some summer residents will not want to spend time and money making a sun lounger with their own hands. In this case, you can go to the store and buy a ready-made garden lounger. The furniture showroom will offer you a variety of such products to choose from. Surely among them you will find both budget options and unusual designs of designer models of outdoor loungers.

After studying the proposed options and comparing their characteristics, all you have to do is decide on the amount you are willing to pay for a sun lounger. The cost of such sun loungers depends on the size and material of manufacture:

wooden sun loungers will cost you between 6,000-15,000 rubles;
for plastic sun loungers you will have to pay from 1500 to 9000 rubles;
Folding frame sun loungers, which can be purchased for RUB 1,350-9,500, won’t hurt your pocket too much.

When traveling to the countryside, many are warmed by the thought that they will have the opportunity to lie in the fresh air for at least a few minutes and enjoy surrounding nature. But everyone has the power to make their vacation more enjoyable if they prepare a place for it in advance. To do this, you must have special furniture like a chaise lounge.

The easiest way is to buy such a sun lounger at the nearest furniture store, although some owners often make their own sun loungers and thereby save a lot. You can do the same, especially since you don’t need to have special skills and knowledge to do this. Even the most ordinary wooden deck chair for a summer cottage can be made from a material that is likely to be found in any household.

But in any case, you will have to prepare for this work, because without drawings you are unlikely to be able to make exactly the chaise longue that you want, especially if you do not have the slightest experience in this matter.

A homemade chaise longue for a summer house is much preferable to a store-bought lounge chair, because you can decide for yourself how it should turn out, and upon completion of the work, decorate it at your discretion. Of course, this will require some effort on your part, but in the end all this will be compensated by the comfort that your homemade chaise lounge will provide you with.

DIY chaise longue

Approaching summer season and it's time to think about creating a sun lounger with your own hands. It will allow you to enjoy your outdoor recreation to the fullest.

Chaise longue in French means long chair. This is a chair for relaxing. It can, at the owner’s request, change the position of the backrest.

DIY chaise longue

Sun loungers are widely used on beaches and by pools. On personal plots, dachas.

Sun loungers are made from various materials:

wood;
plastic;
aluminum;
rattan;
PVC pipes;
durable fabric.

Wooden sun loungers are the most popular and environmentally friendly. They come in a variety of shapes and designs. The disadvantage of monolithic wooden sunbeds is their weight. But this problem can be solved with the help of wheels.

Plastic sun loungers are characterized by easy mobility, ease of maintenance, and relatively low cost. Their minus is their fragility.

Fabric loungers are versatile and comfortable. Their frame is made of wood, metal or PVC pipes. They fold easily and do not take up much space.

Rattan sun loungers look great in the lap of nature. They are environmentally friendly. However, purchasing them is expensive. If you have sufficient skills, you can simply weave a rattan lounger yourself.

In this article we will tell you how to create wooden sun loungers with your own hands.

Monolithic chaise lounge made of wood

Solid models are heavy. Therefore, to make it easier to carry, wheels are added to the headboard. The following instructions will help you make a chaise lounge on wheels with your own hands.

You will need tools:

electric jigsaw or hacksaw;
drill;
screwdriver;
self-tapping screws;
fine grain sandpaper;
spirit level;
roulette.

When choosing a tree, pay attention to coniferous species. They are sold at affordable prices and are characterized by increased water resistance.
Materials needed for a sun lounger:

glued slab made of wood, its thickness should be 2 cm or more; at least 2 cm thick.
boards 0.25 cm thick.
wooden beam with a square section 50x50 mm;
4 wheels with a diameter of 10cm;
corners for strengthening the bed;
door hinges;
varnish or paint.

We suggest you make a chaise lounge according to this pattern.

Legend:

Front legs.
Hind legs.
Bearing longitudinal.
Back support.
Back support.
Bearing transverse.
Fixing bar.
Backrest support.
Wheels.
End beam.
Back slats.
Seat slats.
The support beam is transverse.
Fixing bar.

You can independently determine the size of the desired sun lounger and make calculations. Or use the standard size 60x190 cm. It is the most optimal and ergonomic for the average adult.

Assembling a chaise lounge on wheels

We assemble the base frame from the bars. We secure the load-bearing parts with corners, similar topics that secure the base of the bed.

We sheathe the resulting frame with pre-prepared and sanded boards.

We make blanks for the legs from timber. Their height usually ranges from 5-10 cm. Choose one that is comfortable for yourself and your household.

We drill holes with a drill, retreating 5-7 cm from the ends of the longitudinal sides. We secure the legs with long bolts. We control the horizontal side with a spirit level.

We screw the wheels to the center of the legs with bolts with a diameter of 30mm.

Let's start cutting the lattice elements. Use a hacksaw or jigsaw to cut 8x60cm boards.

Using self-tapping screws and a screwdriver, screw the slats to the chaise lounge frame. Since the boards are not screwed tightly, we use spacers to obtain even gaps.

We should have two parts. The smaller one is intended for the headboard. We connect both grilles with door hinges. We install a support bar under the opening part.

All that remains is to sand off the production flaws. Apply wood primer. Paint it in your favorite color and the chaise longue with your own hands is ready.

For a more comfortable stay, you can sew additional mattresses that fit the size of the bed.

Simple sun lounger

To create a wooden chaise lounge with your own hands, you need following materials, as well as tools:

tape measure and square;
pencil;
saw;
electric drill;
screwdriver or screwdriver;
screws, self-tapping screws and studs for fixation;
sandpaper or grinder;
wood putty;
dye.

Wooden beams used in the work:

for the back of the chaise lounge, take boards 5×10 with a length of 88 cm - 2 pieces, 39 cm - 3 pieces, 60 cm - 1 piece;
2 longitudinal bars for a frame 215 cm long;
2 cross beams -50 cm;
6 legs -35 cm;
13 slats for a seat measuring 2.5 x 8 x 60 cm;
6 slats for the back - 2.5? 8? 88 cm.

The first priority is to create a very strong frame. We take two parts 215 cm long, connect them with screws to half-meter transverse parts.

Let's move on to sitting. Take all the 60 cm slats. Attach them to the frame with self-tapping screws, leaving small gaps. To ensure that the gaps are even and uniform, use spacers 1 cm thick.

We create the legs of the lounger. To give maximum stability to the chaise longue, two legs are nailed at once at the legs. One at a time at the head. The instructions indicate bars with a height of 35 cm. But you can choose a height that is comfortable for you

We make the back from 2 boards measuring 88 cm and 3 - 39 cm. The resulting frame should easily fit into the base, leaving a small gap between the structures.

We securely fasten the longitudinal strips. We round them for a more beautiful look.

Attach the backrest to the base of the lounger. To do this, you need to drill holes at a distance of 9cm from the edge of the seat. Secure with pins.

We make 2 grooves at the base of the sun lounger for the support bars. The first 5x10 cm notch should be approximately 9 cm from the stud. The second is 20cm from the first. But its depth will be only 5x5 cm.

A 60cm beam is inserted horizontally into the first recess. To change the position, the board is transferred vertically to the second recess.

Sand all rough edges and imperfections. Process it. Cover with paint or varnish. The chaise lounge is ready with your own hands.

>Video DIY garden lounger

Fabric chaise lounge

A chair with a frame complemented with fabric is one of the most comfortable, budget types of chaise lounges. It is convenient to fold and easy to carry. Can be stored in flat view. It takes up little space.

To create a sun lounger with your own hands you will need:

bolts, nuts with a diameter of 8 cm;
small nails with round heads;
round sticks (1 piece -65cm, 2 pieces - 50cm, 2 pieces -60cm);
rectangular bars 25x60cm thick (2 pieces 120cm, 100cm and 60cm long);
needle file, fine-grain sandpaper;
glue;
durable material measuring 200 by 50 cm.

Choose materials carefully so that your work is not in vain. Hardwood blocks are perfect for a sun lounger. Choose:

birch;
oak;
beech.

Choose fabrics with maximum strength. Great fit:

teak for mattresses;
tarpaulin;
canvas;
camouflage;
denim

These materials have increased wear resistance and will last you a long time. Let's move on to creating a sun lounger with our own hands. The base consists of three frames:

A.1200x600 mm.
B.1100x550 mm.
H.650x620 mm.

Cut the boards to the required length. We sand with sandpaper.

In the longitudinal bars we make indents of 70 and 40 cm, and drill holes with a diameter of 8 mm with a drill, just like the bolts. Grind with a round file.

We make cutouts in part B. They will allow you to change the position of the back later. To do this, retreat 7-10 centimeters. It is necessary to cut 3 or 4 recesses. We polish well.

According to the diagram, we drill holes in the bars to connect the parts.

Assembling the base of the lounger. We connect frames A and B using screws. Then we connect frames A and B. For greater reliability, we lubricate the ends of the round slats with PVA before assembly. The frame of the sun lounger is ready.

Now you need to sew the seat. Place the material on the bed in the folded position. The fabric should be slightly stretched. Measure the desired length. Hem the edges. This way you will increase the wear resistance of the material. The chair will look neater.

We attach the fabric base to the lounger. We wrap round slats on parts A and B. We nail them with small nails with round heads. The chair is ready.

ADVICE. The edges fabric base can be made in the form of loops. In this case, the seat is simply strung on slats.

DIY fabric chaise lounge. Model 2

For this chair you will need:

wooden slats size 2x4 cm. Two slats length 122cm, 112cm, 38cm. One piece each 61 cm, 65 cm, 57 cm. And four slats 60cm long;
slats measuring 2x6 cm. One each 61 and 57 cm;
65cm wooden rod with a diameter of 1.2cm;
a piece of fabric 137 cm long and 116 cm wide;
bolts, washers, nuts, screws;
glue;
round needle file, sandpaper or grinder;
electric drill.

Manufacturing process:

Process all the details of the future chair in advance. Sand them using a machine or fine-grained sandpaper. Cover with special impregnations that protect the wood from corrosion. Appreciate your work.

Pay attention to the drawing. The crossbars at the bottom of the legs help fix the position of the backrest. Make them. Or cuts, retreating from the edge by approximately 20, 25, 30 and 35 cm.

Drill holes for the bolts in the back frame. To do this, measure 41cm on each side.

On the seat frame, step back 43cm from the top. Make holes.

On the piece supporting the back, drill holes in the center of the edges.

Process all holes with a round file.

Model installation

First assemble the back frame. A beam 61 cm long will carry a large body load. Secure it as securely as possible. Leave a small gap between the two slats. The tissue will be fixed through it.

Assemble the seat. Fold it with the back frame. Be sure to place a washer between them. Bolt the frames together.

ADVICE. To prevent the nuts from loosening quickly, tighten an additional lock nut on top. For greater reliability, attach the nuts to glue, varnish or paint. First tighten the nut. Then loosen it slightly so that the parts rotate freely.

Install the back support piece using washers and bolts.

Sand away all imperfections. If desired, varnish or paint.

Fold the fabric in half, sew, retreating 1.5 centimeters from the edge. Turn it inside out. Fold the edge of the material for the rods that secure the panel between the slats. Sew.

Now insert the material between the slats. Secure with a rod. This model installation allows you to remove the fabric for washing without much effort.

Chaise lounge made of polyvinyl chloride

Another example of a lounger with a fabric base. Only in in this case wooden slats are replaced with PVC pipes. Chair sizes may vary.

In this do-it-yourself chaise lounge model we used:

2-inch polyvinyl chloride pipes;
L-shaped connectors – 8 pieces;
T-shaped connectors – 6 pieces.

First, connect 30cm and 45cm long PVC pipes for the vertical strip using a T-connector. Place L-shaped connectors on the ends. Connect the second vertical in the same way.

Now you need to connect the two sides together. Please note that one horizontal crossbar is solid. Its length is 66cm. It is attached closer to the T-shaped connection, which in turn should be directed into the structure. The second side consists of two 30cm pipes, combined with a T-shaped adapter, turned at an angle of 45 degrees from the long side of the strip.

Do not hurry. Measure pipes accurately. As a result, you should end up with a rectangular structure.

Now is the time to make the connection on which the seat will rotate. To do this, insert a 5cm long pipe into the T-shaped connector and secure it with another T-shaped adapter. It will become the basis of the horizontal frame.

Make the long sides similar to the vertical section, using 30 and 45 cm pipes with an L-shaped connector. For crossbars, use a solid tube 30cm long. And also consisting of 2 x 20 cm with a T-shaped adapter.

You did everything right if you get a rectangle within a rectangle.

The seat is located between a long section of the vertical section and a short section of the horizontal section. Adjust the level of inclination that is comfortable for you. Measure the distance between the two free T-pieces. Cut the pipe to the required length. Insert the rear support.

Take measurements of the fabric consumption for your chair. Use thick fabric. For example, canvas, tarpaulin, jeans. Hem the edges and secure the fabric to the chaise lounge. Enjoy your holiday.

Portable lounge chair

The durable, lightweight chair is quickly assembled and disassembled. It is convenient to take it with you outdoors. The model is so easy to make that it is suitable even for novice craftsmen.

The collapsible chair consists of 2 parts:

backrest covered with dense, wear-resistant fabric;
wooden seat.

In addition to tools, the following materials are used:

2 legs for the backrest measuring 20x40x800mm;
2 legs for the seat - 20x40x560mm;
2 lower crossbars - 10x50x380mm;
1 top crossbar - 10x40x380mm;
1 seat crossbar - 20x40x300mm;
5 slats - 20x40x400mm;
piece of material - 600x500mm.

The procedure for assembling a portable sun lounger is shown in the diagram.

First, the parts are connected using self-tapping screws and a screwdriver.

The workpiece is processed and varnished.

While the frame dries, the fabric is folded and stitched. Then nailed with brackets and construction stapler to a wooden piece.

We connect the back and seat of the chaise lounge.

Enjoying your holiday in your new armchair.

Pay attention to another interesting chaise lounge model in the video.

Original chaise lounge

Design Koalition has developed an unusual chaise lounge with a fabric canopy that will allow you to enjoy outdoor recreation even on a hot day, protecting you from the scorching sun. The cost of such a sun lounger is 5970 euros. We will tell you how to save money and make an original chaise lounge with your own hands.

To create a lounger you will need the following materials. And also tools:

2 sheets of plywood 2cm thick with a size of 160x180cm;
6 round strips with a diameter of 30mm and a length of 92cm;
12 planks made from leftover plywood measuring 94x10cm;
dense fabric with a width of 92 cm;
construction adhesive;
screws;
roulette;
cardboard for layout;
Circular Saw;
electric drill.

Let's start creating a sun lounger.

Transfer the diagram onto cardboard or thick paper. To make the task easier, you can first draw it into squares of 10 by 10 cm. The template makes it easy to correct all the shortcomings on paper. Subsequently, you will only circle it 2 times. Or maybe you’ll get the hang of it and make a few chairs for relaxation.

We transfer the drawing onto sheets of plywood and cut out the side parts of the disk or band saw. At the junction with round beam cut out recesses with a diameter of 30mm.

We sand all the unevenness and cutting defects.

We assemble a rigid structure. Lubricate the ends of the beam with wood glue or PVA. We insert the timber into the recesses and fasten it with screws. The joints can be additionally treated with glue for maximum reliability.

Now you need to put the structure on its side. Place weights on the gluing areas. And let the chaise longue dry completely.

We begin to screw the planks to the ribs of the structure. At the same time, we make a 10-12 cm long indentation between them. Tighten the screws deeper so that their heads do not cling to the fabric and tear it.

We sand the product again. Now we hide the assembly flaws.

Use wood putty to hide all the screw heads in the places where the fabric is tensioned. We paint the chaise lounge.

You probably noticed that the description only gives the approximate width of the awning. The fact is that you can decide to cover the chaise longue entirely with fabric, or just make a canopy. Decide for yourself. Measure the dimensions and sew the awning.

ADVICE. It is better to fasten the awning with ties or Velcro. This will allow you to remove the fabric at any time and wash it without problems.

A sun lounger on the plot of an ordinary private house, cottage, townhouse or country house represents the most important furniture attribute that provides a useful and most comfortable leisure time for all family members, acquaintances or guests. In addition, the original chaise longue for the garden, created with your own hands, is characterized by the ability to bring extraordinary uniqueness to the design of absolutely any surrounding area. A chair of this type, made using natural materials, it will look absolutely appropriate both in the shade of trees, under a canopy of wood, and in the sun. The rocking chair will harmoniously fit into any homestead exterior; in addition, it can be used for newborns, placing this piece of furniture under a canopy, or for dolls.

The easiest way to have a beautiful front lawn
You've certainly seen the perfect lawn in a movie, on an alley, or perhaps on your neighbor's lawn. Those who have ever tried to grow a green area on their site will no doubt say that it is a huge amount of work. The lawn requires careful planting, care, fertilization, and watering. However, only inexperienced gardeners think this way; professionals have long known about the innovative product - liquid lawn AquaGrazz.

A wooden chaise longue for a summer house or a private home, which you can easily make today with your own hands, is characterized by a number of positive properties and has many advantages. Thanks to a large number advantages of a folding wooden chaise lounge for the home has gained such popularity.

The main advantages of such a piece of furniture as a DIY chaise longue are:

Chaise lounges (like swings) have a special design, the structure of the backs, seats and armrests, which allows everyone who uses them to feel as comfortable as possible. Moreover, this applies to both semi-recumbent and semi-sitting positions, which contribute to maximum relaxation of the human body. The rocking chair also has the same characteristics, which you can also make yourself using ready-made drawings from the Internet;
This piece of furniture can be used during the reception process sunbathing, as well as placing it under a canopy - for newborns (or dolls);
The lightness of the materials and the primitive simplicity of the design of the sun loungers makes it possible to move this piece of furniture to any place convenient for the owner;
Folding sun loungers, which are made by hand, are widely used today not only for their intended purpose, but also as benches for relaxation;

Most modern sun loungers are characterized by small dimensions when they are folded - this greatly facilitates the process of storing them;
A high-quality wooden chaise longue, which you can make yourself, is famous for its high degree of durability and has great strength.

Nowadays, using competent drawings, even an amateur in such matters has the opportunity to make a folding or hanging wooden chaise longue for a wooden house, which will be, from an aesthetic point of view, very attractive and can harmoniously complement any exterior of a house, cottage, cottage, townhouse or garden plot. The same applies to a piece of furniture such as a rocking chair, which can be placed under a canopy and used for newborns or even dolls.

Types of sun loungers

Depending on certain features of the design, all sun loungers are conditionally classified as follows:

A monolithic product is a chair in which all components are connected to each other during the manufacturing process, figuratively speaking, “tightly” fastened. This chaise lounge for the home has an excellent level of strength and can withstand heavy loads - it is safe and indispensable in the country for newborns. However, during the operation of a piece of furniture of this type, certain difficulties and inconveniences sometimes arise. For example, in similar products it is impossible to make changes regarding the angle of the backrest, they cannot be folded, and therefore the issue of moving from one place to another is a problem, and storing them is also quite problematic;

Monolithic chairs with special inserts. This type similar pieces of furniture made of wood are characterized, in terms of attractiveness appearance, quite decorative. The fact that such products have additional fragments made from different materials, reduces the level of strength and degree of reliability. At the same time, such a chair for the home looks quite aesthetically pleasing and neat;
Portable sun loungers. Such products have special mechanisms that make it possible to simply, easily and without hassle change the position of the seats. The same applies to their configuration as a whole. A person who uses this kind of furniture has the opportunity to change the angle of the footrests, headrests or their backs. In addition, folding sun loungers are a compact load that can be easily transported, including taking on trips outside the city;
Chairs with metal bases. The process of making such sun loungers for the home with your own hands is more complicated, so it is more profitable to purchase them ready-made. Such products are characterized by aluminum or steel frames on which durable fabric panels are attached. The advantages of this type of chair include light weight, mobility, a high degree of compactness, as well as a high level of resistance to various contaminants during operation.

Components, tools and basic materials for creating a standard chaise longue with your own hands

Today, using competent drawings, it is relatively easy to make a multifunctional and decorative chaise longue for your site or home. In addition, designs of this type are now presented on the World Wide Web, for the manufacture of which you do not need drawings with your own hands. But in mandatory will have to make some effort, theoretical knowledge and physical work in order to create a design of this kind that is attractive in appearance and reliable during operation for spending leisure time in the country house under a canopy or for sunbathing (if there is no comfortable swing in the country house).

Chaise lounge diagram with dimensions

TO necessary tools and the components that are simply impossible to do without in the process of creating a product such as a chaise lounge for the home or a rocking chair for newborns (or for dolls) include a certain list of tools and materials.

This process cannot be done without:

saws;
self-tapping screws;
wood putties;
roulette;
sandpaper;
marker;
paints of a certain (desired) color range;
drills (preferably electric);
square

In addition, it is impossible to make a piece of furniture such as a chaise longue or rocking chair for newborns (dolls) with your own hands without:

wooden boards, the size of which is 400 cm x 2.5 cm × 8 cm, in the amount of four pieces;
wooden blocks, measuring 400 cm x 5 cm x 10 cm, three pieces;
There are two studs that are intended for fixation.

Step-by-step process of making a sun lounger

The primary task is to create the strongest possible frame. In the process of this, it is necessary to create four parts, the material for the manufacture of which is a wooden beam good quality. You need 2 longitudinal parts 215 cm long and 2 transverse parts whose length is 50 cm. Then you should make the seats. In this process, a board of wood is taken and cut evenly into bars, the length of which is 60 cm. It should be remembered that to create the structure as a whole, it is necessary to create 13 elements of this kind.
After this, it is necessary to fix, using self-tapping screws, the frame of the future sun lounger with these segments so that the distance between them is 1 cm.

Scheme for attaching the slats to the chaise lounge frame

The next stage is creating the legs of the product. In order to give the maximum level of stability to the structure in the area where the seat will be, double supports should be created, the length of which is 35 centimeters. They must be made from high-quality wooden blocks. In the headboard area, you can limit yourself to attaching single legs, which will have a similar length.
Next you need to make the back. In the process of creating the frame, you should prepare two parts whose size is 88 centimeters, as well as three parts whose length will be 39 centimeters. These dimensions must be strictly observed - only in this case the frame can become part of the main structure. Moreover, small gaps should be left on all sides.
At the next stage, it is necessary to securely fix the boards on the frame of the back of the product in the direction of the length of the chaise lounge. In order to obtain the most aesthetically pleasing appearance of the structure, the top of the planks should be rounded.
After this, you need to attach the backrest to the base of the chair - this is necessary so that during operation it can easily change its position (be raised or lowered). During this process, it is necessary to drill holes 9 centimeters from the edge of the seat. The grooves must be made all the way through - to ensure free passage through the 2 structures.

Scheme for attaching the slats to the back of the chaise longue

Then, using pins, you should fix the structure on 2 sides of the chaise lounge. After this, 2 grooves should be made in the base of the structure, in which the support bars will be located. As a result, this will provide the opportunity to fix the back of the lounge chair for the home in one position or another. One notch (which should measure 5 x 10 centimeters) should be made approximately 9 centimeters from where the pin is located. The location of the second groove is approximately 20 centimeters from the location of the first notch, and the dimensions of the slot should be 5 x 5 centimeters. In the first recess, it is necessary to place a support beam, the length of which is 60 centimeters, in a horizontal position. This approach will provide an opportunity to rest the back on it, i.e., it will ensure its support and fixation in a semi-sitting position. To be able to change the angle of inclination and create a semi-recumbent position, it is necessary to pull out the first beam and install the board in the second recess in a vertical position.

The process of making your own sun lounger is almost over! All that remains is to complete the final Finishing work- sand the structure with zero-grade sandpaper (you can do it manually, or you can use an electric grinding machine) and cover the chaise longue or rocking chair for newborns or dolls with high-quality varnish or paint.

In order for a self-made chaise longue to serve as long as possible, initially all of it wooden surfaces It is advisable to thoroughly treat it with special protective liquids. This will prevent damage to the structure of the chaise lounge (or swing) during operation as a result of the aggressive action of all kinds natural factors, which include direct Sun rays, rain, high humidity, insects, etc. For these purposes, experts recommend using wood vinegar, oil, high-quality wood varnish or glaze.

For additional protection, as well as a more comfortable rest, a chaise longue, like a wooden swing for a summer house, can be equipped with an awning. This is most necessary if products of this kind are planned to be used in areas with a hot climate or high humidity. The process of installing the awning is simple and does not require much - just four bolts with washers and wing nuts are enough. The head of each bolt must be carefully cut off, and the end on which there is no thread must be sharpened so that it looks like a tetrahedral flat wedge. All that remains is to securely attach the fabric awning to the top of the awning and the side slats of the back of the chaise lounge (or swing) using bolts.