Floor lamp made of pipes. Loft lamp made from pipes: master class

We often come across articles that describe how you can create unusual, but at the same time useful things for your home or apartment from unnecessary materials, which, for example, were left over after renovation. You can also make crafts from plastic bottles, disposable tableware, traffic jams and the like. But in this article we will talk about such a material as PVC pipes, which, according to the rules, are needed and used in the sewerage system, but now we will describe how to make useful thing, such as a lamp made of PVC pipes.

From a completely simple and inexpensive material you can create something fabulous and fantastic, the most important thing here is to have skillful hands and a rich imagination, the rest is up to you. Thanks to these good qualities you can create wonderful and beautiful night lights in the form of lamps.

In fact, we don’t know who first came up with this idea and created such beauty as a lamp from PVC pipes, but in our time people of such nationalities as Brazilians, Argentines, Australians and Chinese are engaged in such handicrafts, but ours is no exception country Russia.

To implement beautiful crafts We will list the materials and tools that we will need during the work:

1. A drill with a sufficient and varied set of attachments that have different thickness and they can also be distinguished by the types of grinding, we will need abrasive ground tips.

2. PVC pipe. When choosing, you need to take into account the size, that is, the diameter, it should be in the range from 25 to 55 centimeters. At the same time, provide a place in which your night light will stand or hang and the dimensions of the pattern that you will cut out on the pipeline.

Wireless lamp made of PVC pipe

If you don’t want to spend a lot of time and effort making a lamp from pipes, then the work can be done with just one drill. But if you want to make a drawing that is voluminous and complex in its composition, then to do this you need to include in the work execution from small to large holes, complex rhinestones, working with the thickness of the pipe walls, removing outer layers to add volume and aesthetics and, of course, giving a 3D effect to some details.

Before we start making patterns and rhinestones on the lighting device, let’s decide what size lamp we need. The main criteria for pipe size are its diameter and height. If you have decided on the size of the craft, then let’s move on to choosing templates and stencils for the desired design that you want to depict on your device. The patterns can be a floral type of design, a landscape or a banal ornament and the like, the choice is up to your taste.

The silhouette of the selected pattern is transferred to the pipe in a very simple, but at the same time convenient method, at the same time attention is paid to the edges above and below. Before you start please note right size diameter of the holes in the pipe so that the drills fit your ideas. A very simple option might be a good idea, for example, you don’t need to draw and cut out various designs, you can simply use drawn holes of various diameters to cut out a beautiful decorative lamp.

A very elegant drawing is obtained when light halftones are used in the work. This effect and quality can be achieved when the outer layer of the pipe, that is, PVC, is removed using abrasive tips. The more layers you remove, the more transparent the effect will be and the light will be much brighter in these places than on a simple surface.

To give a lamp made of PVC pipes a 3D format effect, you need to attach parts that will protrude beyond the walls of the pipe, you first need to thin them using the same tips that were used when giving the light halftone, after doing this work we cut out the shape using special construction knife.

To add aesthetics and the final effect, we take construction hair dryer(it imparts more intense heating), heat the mold until elastic and bend it to the side. We leave the mold alone and wait for it to cool; when it cools, it will remain in the same state in which you bent it during heating.

Such a lamp does not even need to be painted upon completion of the work; the natural color of the pipes (white) will fit into the design of your house or apartment quite seamlessly. But still, if you want to give the lamp a colored design, it will not take much time and much effort, you just need paint from an aerosol can.

Upon completion of work from the decoration sphere, it is worth moving on to work that will answer all practical questions. So, to complete the craft, you need a very strong and stable shelf or base, at your discretion, because a lamp made of PVC pipes must stand steadily, since it weighs a lot and is also quite large in size.

The quality of light in your device may be different kinds lighting using lamps. Recommended to use energy-saving lamps, because they will not allow the walls of the lamp made of PVC pipes to overheat and deform the decorative shell. To make the lamp more decorative, you can use a garland during lighting, it will turn out very interesting.

Designer lighting fixtures are sold at incredible prices. In fact, making a lamp from pipes yourself is not a problem at all. No purchase required expensive materials or advanced knowledge of electrical engineering. Let's consider several homemade options lighting elements from scraps of various pipes.

Desk lamp

An original lamp made of pipes will add some zest. The structure can be assembled from scraps available on the farm or purchased material at a hardware store. After purchasing all the materials, it will take no more than an hour to assemble the lamp.

Among the required components:

Long and short nipple.
Six pipe squares.
There are the same number of small nipples that serve as corner clamps.
Three purposes.
Drill.
Wire with switch and plug.
Insulating tape.
Hot glue.

First, all pipes are treated with solvent, and the stickers are removed. The light element is inserted into the socket, after which the wire is pulled through the square. The light bulb socket is fixed with glue. The structure is processed carefully so as not to affect the threads, after which it is left until the adhesive composition dries.

Main stages of work

Subsequent assembly of the lamp from pipes is carried out in the following sequence:

A hole is prepared in the tee for the wire with reverse side using an electric drill.
Pipes are assembled along threads using nipples.
4 corners are taken as the base, three tees are twisted together, the standard hole is directed upward, and the homemade socket is directed to the lower invisible part.
Two nipples connected to each other will serve as a holder.
The cable is pulled through pipes without a switch.
The switch is assembled and connected.
The functionality of the assembly made from pipes is checked.

This design is easy to fix if you are not satisfied with the resulting design. The result is an excellent and inexpensive night light or work desk lamp.

Wall option

The pipe lamp, the photo of which is shown above, is made as follows:

The grille is removed from the old street-type lamp. If it fits into the interior, this is not necessary.
A pipeline flange is attached to the cartridge, which will serve as a base fixed to the wall.
Then it is connected to a tee, nipple and angle. Another flange is attached, then the wiring is pulled through the pipes.
The height of the lamp placement is adjustable.
The lamp is connected to the socket and the switch is mounted.
The flange is attached to the wall using screws, and the operation of the device is checked.

The operation will require the following materials:

Lamp with or without grille.
A pair of black nipples for plumbing purposes.
Cable.
Two metal flanges, the diameter of which matches the size of the cartridge.
Screwdriver and fixing screws.

Loft lamps made of pipes with a concrete base

The lampshade is made from several wooden embroidery hoops and watercolor paper. The whole process is divided into mold preparation, manufacturing concrete base, connecting wiring, assembling and fixing pipes, as well as arranging a lampshade. The container for pouring can be made of plastic; its dimensions must be sufficient to support the weight of the entire structure.

Initial stages:

Using a knife, make a hole for the cable.
The reinforcement wire is placed in a container.
The cord is threaded through the pipes with the necessary margin.
Marking tape is used to mark the exit of wires from the solution.

The cord must fit into cement mixture at the point of connection to the switch, then fed through the middle part of the pipe flange, in which a hole is provided.

Final part

Further production of the lamp from water pipes is divided into several stages:

Done cement mortar, which is poured into the prepared form.
The switch is fixed flush with the surface. Be careful not to let it drown in the mixture.
Mount the flange on top of the solution, thread four mounting screws through the holes.
After preparing the base, the wires are threaded through the pipes, attaching them to the flange.
Next, the free edge of the cables is pulled to the cartridge, after which the latter is attached inside the pipe.
The light bulb is screwed in, the switch is connected and turned over.
A lamp with a low power rating can be left open.
For powerful light element you will need to build a ceiling. To do this, take two hoops and watercolor paper, and treat the seam with wood glue.
This design allows you to choose any color and fabric covering used.
The finished lampshade is attached using small screws that are screwed into the inside of the hoop from above, or with a thin wire attached to an additional flange of the pipe.

LED lamp

PVC pipe is optimal for this device. It is worth noting that this option is equipped self-powered. The design of the lamp is as simple as possible; anyone can assemble it with a minimum of tools and materials. You will need several larger pieces of pipe for the base, including angles and fittings, and smaller diameter PVC pipe for the stand. The system uses a resistor with a power of at least 1 watt. This indicator is designed for 6 LEDs.

The circuit is connected in a standard way. It is recommended to use type. This will allow you to quickly make a nest for it in the pipe and will not require cutting additional elements in the form of a rectangle under the slide switch. In addition, the switch should not be instantaneous, otherwise you will have to constantly hold the button to operate the device. The lamp made of PVC pipes is equipped with a lampshade. Its painting is carried out in several layers. Otherwise, when the diodes are turned on, streaks or uneven processing will be visible. A battery of suitable capacity is mounted at a distance of 80 millimeters from the edge of the pipe at the base. You can also install a switch there. The main thing is that these details do not interfere with each other.

Loft chandelier made of pipes

Modern trends in lighting organization often require taking into account not only the efficiency of lamp elements, but also the chandeliers themselves. You can create them yourself from scrap materials, while getting an original and inexpensive design. For example, it is possible to do ceiling lamp from plastic pipes. To do this you will need the following components:

Ceiling type socket.
12 branches for sockets and light bulbs.
Polymer water pipes.
12 small lamps.
A can of special paint.
Paper.
Ceiling rosette.

The work begins with developing a model of the chandelier and connecting the branches to each other. You can create both a symmetrical design and an original author’s model (it all depends on your imagination). Next, lay out the paper on which the painting process will take place. Paint on all sides and leave the lamp to dry. The ceiling rosette is painted with visible side. If necessary, the chandelier can be sprayed again. Then all that remains is to connect the structure to the ceiling using screws and a flange, and also screw in the lamps. Check the design and enjoy a unique product. By the way, if you get tired of the configuration of the lamp, it can be transformed into a different style in a few minutes.

Adjustable Table Lamp: Initial Manufacturing Process

This DIY pipe lamp is distinguished by the fact that it can be adjusted in reach and height. Many replacement parts are available to find at home, so it is also economical and also custom.

Materials used:

Bicycle star.
Pair metal pipes with half-inch thread (length - 450 mm).
Flange.
Fitting.
Two elbows at 45 and 90 degrees.
Two copper tubes by ¾.
Socket.
Polymer bushing.
Electrical cable.

The bicycle sprocket will serve as the base. Holes for the flange are drilled in its center, after which it is painted. Then an iron pipe is screwed into the flange. The upper part of the element is attached to the base of the lamp, and the second part with a larger diameter is installed in such a way that a sliding effect appears. This will allow the upper part of the structure to be folded down by moving the top tube.

Final part

To fix the pipe, a hole is drilled in the lower compartment for the fixing screw. A pipe with a diameter of ¾ is soldered, which will allow for alignment and also obtain original look. As a stopper, you can use a ¼ bolt, which is attached to the outer handle of the faucet. The lampshade can be made using one of the methods described above, attaching it with screws and painting it with copper or gold paint.

The rubber bushing is mounted in the opposite end of the fitting, after which the end of the wire is cut off and pulled inside the pipe to the cartridge. The lamp is screwed into the socket, around which the casing is clamped. A similar lamp made from water pipes will make it possible to provide required quantity light at different conditions. At the same time, its cost is minimal.

Lighting devices in the loft style are not just a tribute to fashion, but also a practical, economical solution for basic or additional lighting. Let's consider how to make lamps from pipes on your own, what are the main features of working with the material, and what the process of assembling them will look like with my own hands how to make a hanging chandelier from metal pipes, a wall lamp from metal-plastic, table lamp and couplings, as well as what difficulties may arise.

Today anyone can make their own lamps based on metal, plastic and metal-plastic pipes. To do this, you need to acquire patience, a desire to achieve the planned result, a set suitable materials and tools and strictly follow the instructions. There are many advantages to such homemade products:

Low cost of the product.
Ease of use with a standard threaded connection.
Possibility to create any design.
Wide access to materials (parts can be bought at a construction market, second-hand metal shop, or simply found).

Of the processing features of the pipe materials used when creating lamps, the following nuances must be taken into account:

All elements connected by thread must have the same standard and similar characteristics (pitch, diameter, direction).
Metal-plastic pipes should bend well under force, and their surface should melt during heat treatment (also polypropylene analogues are most often suitable for this role).
If the product is not planned to be painted, then it is better to use galvanized, stainless, copper or brass materials as a basis.
The metal body of the lamps easily conducts electricity, so when installing 220V light bulbs on them, they must be grounded.
The shape of metal-plastic lamps is set through bends, and for cast iron and metal lamps - with the help of all kinds of adapters, pipe sections and fittings.

To facilitate and speed up the process of assembling such lighting devices, manufacturing is best carried out in accordance with the following algorithm:

Make a drawing/sketch indicating all elements, their sizes, characteristics.
Before assembly, paint and dry all components and materials that require this, or decorate the surfaces in accordance with the design ideas.
Assemble the lamp strictly according to the drawn up plan.
Install wiring and light bulbs.
Secure the lighting device, check its serviceability by connecting it to the network.

Important! One of the most important indicators The operation of a lamp with a metal body is electrical safety. Therefore, for those who do not have experience in electrical installation procedures, it is better to consult with an experienced specialist in this field before starting assembly. For internal wiring, you need to use a thick conductor with good electrical insulation and position it so that it does not rub against the edges of the pipes, the sharp edges of which must be removed using abrasive materials. In addition, whenever possible, it is better not to place the junction points of the cores inside such a structure; in extreme cases, reliably isolate them.

Hanging chandelier made of pipes

Let's consider one of the simplest options for assembling a pendant chandelier based on brass or copper pipes. To make such a lamp you will need:

Five pear-shaped light bulbs.
Ten pipe sections - two sets of 5 of the same length - short and long.
One segment maximum length as a ceiling hanger.
Five adjustable brass hinges.
Set of 5 ceramic light bulb sockets.
Double wire (selected so that it fits easily into the tubes).
A coil of electrical cable.
Insulating tape.
Electrical installation tool.

Read also How to properly connect an LED to a 220 V network

Installation instructions

When making such a lamp, you need to follow the following step-by-step instructions:

install the wiring by unscrewing the covers on the sockets and connecting the wires to them, as shown in the image below;

pass through pipes internal wiring from the chuck, connect the long and short sections using hinges;
tighten the wiring and cut it off, leaving about 5 cm for connecting to the main cable;
screw the cartridge into the edge of the tube section, which will be located at the bottom of the structure;

screw long sections of pipe into a 5-pin fitting, thereby assembling the base of the lamp;
twist the wires coming out of the pipes white with a wire of the same shade of the main cable, black - by analogy;

Carefully insert the resulting twist with the main cable into the pipe on which the lamp will be attached to the ceiling surface;

the chandelier is hung on a chain or mounting wire in its place, the bulbs are screwed in, the network is connected and the functionality of the assembled lamp is checked

Wall lamp made of flexible metal-plastic

To independently assemble a wall lamp from metal-plastic pipes, you will need the following components:

A set of metal-plastic pipes with lengths from 20 to 50 cm.
A wood base or a piece of thick-walled plywood or other similar material.
Wiring.
Cartridges and lamps for them, as well as fittings of a suitable size.
Metal saw or pipe cutter for metal-plastic.
Screws, Phillips screwdriver or screwdriver.
Paper, paint, decorative materials.
Silicone sealant.

Manufacturing instructions

The process of making a wall lamp from pipes is as follows:

A fragment of plywood or solid wood is adjusted to the shape intended by the design, painted or decorated.
A hole is drilled in it (or several, depending on the number of tubes and light bulbs for them), with a diameter similar to a piece of metal-plastic pipe.
This segment is inserted into it and sits on glue or sealant.
After drying and fixing, two-wire wiring is passed into it.
From the free end the segment is fitted.
If the fitting is threaded, you can select the appropriate threaded cartridge for it. If not, the latter can simply be glued to the sealant, having previously connected it to the conductors.
Next, the finished lamp is attached to the wall surface with screws or dowels.
The light bulb is screwed in, the wiring is connected to the network and checked.
As a decorative element for a fitting with a socket, you can choose a floor lamp, lampshade or sconce elements that are suitable in size to improve its design.

The main advantage of the lamp is metal-plastic pipe– ability to change direction luminous flux due to its slight bending.

Coupling table lamp

To make your own lamp from couplings you will need the following components:

Short and long nipple - just a couple of pieces.
Six couplings (angles).
Six shortened nipples for connecting them.
Three tees for water supply.
Cord with plug and switch.
Hot glue device.
Insulating tape.
Drill and other installation tools.

The scope of application of such a pipe lamp is quite wide - for primary or additional illumination of the work area of a table, workbench and any other place (due to the compactness of the lighting device).

Build process

Detailed instructions for making a table lamp from couplings are as follows:

before starting work, all pipe sections, couplings and connections are cleaned with a household cleaner, for example, white spirit, stickers are removed and then dried;
in order to bring the wires to the connection point in the lamp, it is necessary to temporarily disconnect the wire from the switch;

then a cartridge of suitable size is inserted into the coupling. You can secure it either using a thread, or by placing it on glue, using a gun, after first connecting it to the wiring;

Creative ideas often arise unexpectedly and seemingly out of nowhere. But their material implementation gives such dividends that the costs of their implementation actually seem meager. Today we will try to make a decorative lamp from a PVC pipe that looks inconspicuous at first glance, which will not leave anyone indifferent.

Will need

To materialize this creative idea In a beautiful product we need to have:

a piece of 10 cm PVC pipe about 30 cm long;
paper;
wooden box or beam 12×6×30 cm;
small piece of matte PVC plastic;
electrical materials (wire, plug, socket, light bulb).

You should also get:

metal ruler and marker;
Dremel;
milling cutter with attachments;
sickle knife;
sandpaper;
a can of aerosol paint;
glue gun.

Algorithm for making a lamp from PVC pipe

On the pipe blank we mark a section 24 cm long. Using a sheet of paper, we make circular lines on the side surface of the plastic pipe according to the markings.

Using a mini-grinder, using the circular markings, we cut off the excess from the plastic pipe blank.

We place a wooden box on the desktop that will serve as a template. Let’s check its cross-sectional dimensions once again: they should be 12x6 cm, which is acceptable as a template for a PVC pipe with a diameter of 10 cm.

We twist a sheet of paper into a bundle and set it on fire at one end from an external fire source (lighter, matches, etc.).
The thermal energy from a burning sheet of paper will be quite enough to soften the material of the plastic pipe, mainly on one side. This method is for those who do not have a hair dryer.

Then quickly, before the plastic has cooled down, insert it inside the pipe wooden template and form from round section rectangular along its entire length, pushing the wooden box along the pipe until it appears on the other side of the pipe blank.

Leave the template in the pipe for a while until the plastic cools down and becomes stable. rectangular shape section, after which it can be removed from there. After making sure that the shape of the rectangular plastic element is without flaws, we process the ends with a mini-drill, removing burrs and rounding the edges. We use the round ring left over from cutting a plastic pipe as a template for reproducing a circle in the center of the wide side of a rectangular plastic element.
By using hand router cut out a circle according to the applied markings and clean the edges of the resulting hole by changing the nozzle.

At a certain and equal distance from the edge of the hole, we mark 23 points, evenly spaced around the circumference of a large circle. We make 23 small holes of the same diameter according to the applied markings. Using a sickle knife, carefully remove burrs from all holes.

On front side rectangular workpiece, where one large and 23 small holes have already been made, we mark two symmetrically located slots with a distance of 1.5 cm from the ends and also 1.5 cm wide, which will also pass along the sides of the workpiece, slightly short of the opposite wide sides.

Carefully cut the slits using a mini-drill and cutting disc and remove the strips of plastic, helping yourself with a sickle-shaped knife. We also use it to clean the edges of the slots.

On the back side of the lamp body blank, at one end we mark and drill two small holes with a mini-drill, one below the other, and clean them with a sickle-shaped knife.

A small piece sandpaper Using a suitable grain size, we finally grind all the places where we cut and drill the lamp body.
We apply paint from an aerosol can to the future body of our homemade lamp and make sure that it lies evenly over the entire surface and without smudges.

In accordance with the dimensions of the lamp body 12x6x24 cm, mark a sheet of translucent PVC plastic for cutting and cut out a piece of 24x24 cm using scissors. Using a marker, draw two straight lines parallel to the edges and at a distance of 6 cm from them.

Bend plastic sheet along the straight lines drawn and we get U-shaped profile, which we insert into the lamp body so that the wide side is adjacent to the front panel from the inside and covers the large and small holes.

Glue the U-shaped matte plastic by using glue gun to the lamp body at the corners and let the connection harden and set.

We pass a copper two-core wire through the upper hole made on the back side of the lamp housing so that the cartridge at one end is inside the housing.

We attach to the second end of the wire electrical plug, and we screw an incandescent light bulb with a colored bulb with a power of no more than 5 watts into the socket in order to preserve the plastic from which our lamp is mainly assembled.

We plug the plug into the electrical outlet so that the light bulb inside the body of our homemade product lights up. As a result, we will witness the unusually beautiful glow of our decorative lamp, the effect of which will increase even more if you place it in dark place.

Attention!

Plastic dust poses a serious danger to your health, so a respiratory mask will be a good idea for the entire time you are working on a PVC pipe lamp. Gloves and safety glasses are also a good idea.

For a true jack of all trades, leftover building material is a real treasure. From piles of rubbish he is able to create masterpieces suitable for interior decoration and useful for everyday use. There are enough leftover plastic, plumbing fittings, plugs, and metal fasteners to create a beautiful and functional pipe lamp that can be hung on the wall or used in place of a table lamp.

If ready product seems simple to you, you can complicate its design by adding metal parts - pipes, bolts, nuts, legs from fittings

Self-assembly of lamps from pipes

Even people who do not know the basics of plumbing can build a product from sections of pipeline, metal and plastic parts, and it will not be difficult for specialists involved in laying communications every day to come up with their own, unique, interesting options. The instructions provided are just examples of how to quickly and easily unnecessary materials can be turned into useful things.

A plumber's dream - a lamp made from a water pipe

For the installation of household communications, polypropylene is increasingly used - durable, flexible, reliable material, not susceptible to rust, performing its functions for decades. Systems are installed instead of outdated ones metal pipelines which are dismantled and thrown into a landfill. Let's take a few used iron parts and make a simple, convenient lighting device from them.

We will need:

1 pipe of arbitrary length;
2 flanges for stands;
cross as a connecting element;
2 knees;
electrical cord with switch;
lamp (energy saving or LED);
cartridge, coupling for fixation.

If the diameter of the base is 20 mm, then the remaining parts have the same cross-section.

Strictly technical, rugged lamps and cozy home floor lamps - all made from ordinary water pipes

The assembly process is simple. We connect the elbows and flanges with the cross - the stand is ready. We insert the pipe from above, then screw the coupling. We thread the wires, be sure to make insulation, since metal conducts current, screw in the light bulb. A few simple manipulations - and original lamp made from water pipes!

To give old parts an aesthetically attractive look, we clean all the elements with fine sandpaper and coat them with metal paint.

Video: Functional robot lamp made from pipes and fittings

Wall lamp made of flexible metal-plastic

For the wall-mounted version, we need a more dynamic tubular LED lamp that can be directed in different directions, and here metal-plastic products come in handy. Unlike plastic parts, they are durable, have elasticity, in other words, they bend.

Ability to bend and accept different shape will help make the lamp unique

For convenience, it is better to make the base, which is mounted on the wall, from a piece of wood - solid pine, birch blank, or a piece of thick plywood. We drill a hole in it for the flexible element. We grind out a body for the cartridge from a small block, taking into account that a movable fragment will be attached to the other side.

Ready Wall Light made from pipes - excellent lighting for paintings or photographs

All that remains is to complete the assembly. We insert it into a metal-plastic blank (length from 20 to 50 cm) electrical wire, previously threaded through the base, we fix the cartridge and perform insulation. We fix the base on the wall, screw in the LED element and enjoy the resulting effect. It remains to add that flexible tube for a lamp, you can turn it in any direction, and if desired, even tie it in a knot if the length allows.

The cost of metal-plastic products of medium diameter is low - from 60 to 100 rubles per linear meter

Video: LED lamp made of plastic pipe

Three-arm horizontal illumination

A convenient lamp made from several movable copper tubes on a metal base can create complete lighting for small room or lighting for paintings, photographs, collages or shelves with souvenirs.

To work, you will need pieces of metal pipes of the same diameter, copper bendable tubes for making horns, several tees (according to the number of horns), a half-flange (for fixing the lamp on the wall or ceiling), plugs, electrical wire and fasteners. You will also need lamps - it is better to take LED lamps that do not heat the surrounding parts and the illuminated surface.

The tools necessary for assembly are found in every home:

jigsaw or hacksaw for metal;
pliers;
screwdriver;
drill and thin drills;
insulating material;
metal paint, brush.

First you need to prepare the copper tubes, then screw the base and finally assemble everything into a single structure. We make horns for lamps from copper blanks 30-40 cm long. To do this, they need to be carefully bent so that they take the form of a smooth arc. Beware of creases, as the corners on the tubes will ruin appearance structures and will prevent the passage of the electrical wire. Twist the ends compression fittings, thread the wires, secure and insulate the sockets.

We clean the metal pieces, paint them, and after drying, we twist them into a long pole. We attach copper horns to it at regular intervals, not forgetting about a safe connection electrical wires. We fix the lamp we assembled with our own hands from pipes on the wall or ceiling so that the rays illuminate the desired area, screw in the bulbs and check. The design in a trendy industrial style is ready.

LED night light made of plastic pipe

Plastic is easy to process, so there are a lot of possibilities for decorating lampshades and shades made from this pliable material. Openwork lamps made of plastic and polypropylene pipes installed on the floor, on a table, used as a table lamp, night light.

Beautiful designer lamp made of plastic elements and multi-colored light bulbs

We stock up on plastic blanks and get to work. The best option– products with a diameter of at least 15 cm, so that the walls of the finished lampshade do not come into contact with the lamp, even if it is LED. The tools you will need are a drill with various attachments, drills, stationery knife, construction hair dryer.

Operating procedure:

We prepare the base - a heavy stand with a fixed cartridge, and connect the electrical wire. Wooden will do a block or structure made of several parts.
From a thick PVC pipe, cut out a section 20-30 cm in height, process the edges - this is the future lampshade.
On plastic surface we apply the image using a stencil - an ornament, a drawing, a pattern.
Using a drill, knife, scalpel, we cut out the excess parts, making cuts, cuts, through holes. We leave some parts translucent, reducing the thickness of the material. We heat it with a hairdryer to bend or deform the necessary elements.
Place the lampshade on the base and turn on the lamp.

Video: Table lamp made of polypropylene pipes and fittings

White, not suitable for a bedroom or living room, the color of the plastic can be changed to a more bright shade, painting the surface of the lampshade with special acrylic paints. Ready-made lamps made from PVC pipes look simply magical.

To connect elements we use threads, bolts and nuts

Let's take an example from designers

The use of old unnecessary things to create unique interior items has long been of interest to designers, engineers, and self-taught craftsmen. Metal and plastic pipes turned out to be comfortable material for creating various lamps, chandeliers, table lamps, floor lamps, sconces. Some of them look modern and are suitable for decorating offices and premises in the high-tech style, while others, elegant and stylish, are appropriate for an interior in the Art Nouveau style.

Artfully carved flowers and butterflies transform plastic pipe V amazing decor

It is curious that magnificent designer items that cost a lot of money are assembled from the most ordinary building materials, which means that each of you, if desired, can create your own unique masterpiece, which is not inferior to well-known analogues either in appearance or in functionality.