Turbo stove wood chipper from a thermos! It will even fit in your pocket! How to make a wood chip stove with your own hands Wood chip stove from a washing machine drum.

Using a wood chip stove helps in many ways. life situations. This equipment is especially suitable for hiking conditions and operation in open areas. The market for dacha equipment is filled various models wood chip stoves with individual qualities.

Collapse

But such a structure can be built with your own hands. The main difference between the choices is that the products self made are guaranteed to have only necessary features: simplicity and reliability.

What is a wood chip stove?

The wood chip stove is a small mobile structure. This unit is perfect for cooking food and heating liquids in a pot. And any brushwood can serve as fuel.

A DIY wood chip stove has the following properties:

A properly manufactured stove has excellent draft. This means that any flammable composition is suitable for complete ignition.
The camp stove-wood chipper does not emit sparks and does not form coals after use. Therefore, such equipment can be used in places where open fire prohibited.
The compact structure allows you to take the stove wherever you need it.

Design and principle of operation

The primitive wood chip stove system operates on a burning flame. The principle of operation of such a device is long-term combustion. The main advantage of a flame combustion stove is that you can use fuel that burns difficult - solid fuel(branches, roots, etc.). Efficiency in in this case low, because the work uses oxygen, not gases.

Such a device can be constructed at home in a short time. A high-quality DIY wood chip stove must use pyrolysis. Such stoves are economical and practically omnivorous. A wood chip stove that operates only on the decomposition of natural compounds is called a turbo wood chip stove.

Fuel consumption in this equipment occurs only with a certain amount of air. A diagram of the operating principle of this stove is presented below:

At the first level, there is a full supply of air, then, after about 10-15 minutes, it quickly decreases. The oven enters the smoldering stage. At the same time, even gases produce energy.

This camp stove does not have a convenient shape, but it has many useful characteristics:

The fuel can be dry fuel.
With a small amount of fuel you can cook food for several people.
Even if the basis of a pyrolysis stove is a tin can, the device will still last a long time. High temperatures accumulate on the axis of the unit.

Manufacturing options

With a certain set of equipment and skills in working with metal, making a wood chip stove will not be difficult. There are several current options.

From the drum of a washing machine

It’s possible to adapt a worn-out washing machine into an excellent outdoor fireplace. To set up the stove you will need a drum washing machine. The holes around the perimeter of the drum will provide a constant flow of oxygen and also serve as decoration.

The diagram shows the possible dimensions of the manufactured furnace.

Materials and tools:

Drum.
Angle grinder and grinding wheel.
Wire brush.
Cutting wheel for metal.
Metal corners and flat workpieces.
Heat-resistant paint.

Instructions:

From the cutlery stand

Using an ordinary cutlery stand you can make a simple wood chip stove. The design will last a long time, because this kitchen item made from food grade of stainless steel with thick walls.

To make such a structure, you need to take:

four bolts with nuts.
metal rods.
marker for marks.
Bulgarian
steel partitions, metal chain (optional).

Instructions:

The legs will be bolts that need to be attached to the bottom of the stove. The rods are inserted through the upper holes. This is how you get a tray for dishes.
The system can be improved using a variety of stands. To do this, four markings are made on the rim of the stand and cuts are made using a grinder. The cross stand is strengthened into the formed grooves.
The same action should be performed with the bottom of the stove. This is necessary for the formation of greater lift and good access of oxygen.

Option 1

Option 2

From a can

A good solution for tourist events can be the use of a wood chip stove made from cans. The advantages of this design are that assembly requires a minimum set of tools and a small amount of time.

To work you will need:

Two tin cans of different diameters.

Manufacturing instructions:

Such a stove will serve ideal solution for use by one or two people. Despite the simplicity of the design and small dimensions, a fairly strong hearth is created in a stove made from cans. It is also worth noting the environmental friendliness of such equipment.

Foldable design

The folding camp stove-wood chipper is compact and easy to carry.

To assemble such a stove you will need flat metal parts. IN assembled form The folding stove looks like a small square package. It should be remembered that the corners of such a product are sharp, so folding wood chip stoves must be placed in a special bag or container.

Materials and tools:

Sheets of steel (no thicker than 2 mm) and wire (no thicker than 3-4 mm)
Metal hacksaw, file.
Drill, hammer, for bending steel.
Pliers
Bench punch.
Suitable fasteners.

Drawing:

Manufacturing instructions:

It is not difficult to make such a unit with your own hands. The advantage of this design is obvious: the stove is easy to assemble, like a construction set. Using the drawings greatly simplifies the construction of a wood chip stove with your own hands. Basic skills and tools will allow you to create an always-in-demand structure for heating and cooking food in hiking conditions.

The best ready-made models

Ready-made stoves can be purchased on any suitable website or in construction stores. Also interesting solution You will be purchasing a stove from the well-known website “Aliexpress”.

Turbo oven PS1500T

This option showed excellent results work at low temperatures.

The stove does not require large supplies of firewood and saves a lot of time and effort. The blower in the furnace system allows you to dial high power in a matter of minutes. Even raw wood can be used as fuel.

The PS 1500 T turbo stove kit includes the following parts:

electric air blower,
stainless steel housing,
the combustion chamber,
stand.

The supercharger runs on two AA batteries. Operation is possible in three modes:

High fan speed (3000 rpm).
Low fan speed (1500 rpm).
Off — when switching off, the supercharger must be removed to avoid overheating. In this case, the oven will continue to operate thanks to natural draft.

On one set of alkaline batteries, in different modes, the oven will work for about 50 hours.

The price range of the PS 1500 T turbo oven is 2500-3000 rubles.

Forest gnome

This is a compact, prefabricated oven. To assemble and disassemble this option, no tools are required. The oven is made of high quality stainless steel.

The main advantage of the Forest Gnome is its versatility. The unit is equipped with three grate compartments. Low for wood fuel, medium for alcohol. The upper compartment is used for dry fuel.

Advantages of the Forest Dwarf stove:

The grate rises above the ground, providing air access to the flame.
It is also noteworthy that the design can be supplemented by installing walls for pyrolysis.
This version of the folding stove is safe to use, because its design is a closed space.
There is no need for a large supply of firewood; you can use any forest debris, including cones.
Quality of materials. The thick food grade steel used to create the oven will last a long time.
The set of the Forest Gnome stove includes a folding stove and a cover. The cost of the device is about 1000 rubles.

Biohit 123

This oven is non-demountable design, which can be used as a stand-alone oven.
The equipment is supplemented with special crosshairs.
The structure consists of three parts:
The first part serves as a stand and is necessary for stability.
The second part is the firebox.
The third part is the second crosshair on which the dishes are installed.
In the combustion part there is a tray for wood fuel. The design also has an additional slot with a door for storing firewood.

Advantages of the Biohit 123 stove:

No assembly required.
Always ready to work.
Long service life due to bent structure.
The stove can be used as storage for small items.
An additional fuel tray is included in the package.
Dry fuel is suitable as fuel.

One of the disadvantages of the stove is its inconvenient dimensions.

The cost of a non-separable stove Biohit 123 varies in the range of 1500 - 2000 rubles.

Survivor #2

This option has a large set of positive qualities:
The continuous operating cycle is 10 hours.
Long service life.
The ash pan is designed like a full-fledged stove. Equipped with a large door.
An improved type of fastening that increases the strength of the structure.
The volume of the installed container is up to 30 liters.
Due to the high efficiency coefficient, fuel consumption is minimized.
Convenient system. The door is equipped with grooves made in the form of a slide. Therefore, the door can cover both the firebox and the vent.
It is worth noting the material used to make the stove. The stainless steel alloy contains nickel and is non-corrosive. The product is resistant to various chemical environments. Also, the wood chip stove “Survival No. 2” has high mechanical loads.
The price of the stove is about 1000 rubles.

Biolight

The device represents an innovation in the market for similar products. The stove is equipped electric generator, which allows you to charge various equipment via a USB connector. In addition, the stove perfectly copes with its intended purpose. The oven is easy to carry and convenient to use.
The furnace structure consists of a combustion chamber and a power supply. In portable conditions, the unit can be placed inside a metal combustion chamber, which increases mobility.
The combustion chamber is double-walled, which indicates the reliability of the design. Thanks to the double structure, outer side It will heat up much less.
At the bottom of the stove there are folding legs. During operation, they do not heat up much, which allows you to handle them with your hands if necessary.
The power supply is made from thick-walled, fire-resistant plastic.
The Biolight wood chip stove can operate in slow and fast mode. The second option is only available after the oven has heated up. The stove is controlled using one main button. An additional convenience is the presence of a USB connector through which you can charge the battery and other devices.
The cost of the Biolight stove is about 10,000 rubles

Features of operation

With a constant flame, add larger brushwood.
Start cooking after the formation of bright coals.
To avoid ash getting onto the pan, add a little fuel.
There is no need to maintain a high flame. When cooking over coals, the heat will be stronger and the dishes will get less dirty.
Disassemble the oven only when completely cool.

Conclusion

The wood chip stove is reliable design, which is simple and convenient to use. It doesn't matter if it's homemade model or purchased. In any case, the wood chip stove is a good decision for cooking outside the home.

The diameter of the future device is 20 cm; accordingly, the prepared stainless steel sheet must have a length of at least 65 cm. Next, you need to bend a pipe from it. A door should be provided in the side of the oven that will allow open position add fuel, and when closed, direct the heat to the top.

The top of the stove should be equipped with a mesh that can be used for boiling water, heating or cooking. You can also make slots for skewers there.

It is necessary to drill several small holes in the side of the cylindrical furnace body, which will provide access to oxygen during the combustion process. In addition, in the lower part it is necessary to install a grate with three holes for pegs, through which the stove will be fixed to the surface of the earth.

As a result of the actions described above, you will get a compact device with a diameter of 20 cm, a height of 18 cm, with a working firebox space of 17x15x15 cm.

Second option

To make a wood chip stove using this method, you need to prepare the following: materials and tools:

steel sheet no more than 1-1.5 mm thick;
steel wire with a diameter of 3-4 mm, as alternative option you can use spokes from bicycle wheels;
scissors and a hacksaw for cutting metal;
3 bolts, 3 nuts and 3 engraving washers;
drill, center punch, hammer;
file;
pliers.

IN Lately The Robinson stove, which was created specifically for heating water and food in camping conditions, is gaining popularity. More information about it can be found at.

You will probably also find useful articles that describe step by step production And .

Third option

To create a heating device using this method, you will need the same tools and materials that were used to implement the previous method. The finished wood chip stove will have the shape of a tetrahedron with dimensions of 12x12x15 cm.

First you need to create a sweep future design on a piece of paper. Then you should transfer it to metal and cut out all the elements of the future heating device.

This model of wood chip stove is collapsible, which allows you to significantly save space when transporting it. The bottom and side walls of the device must have holes for studs. Using these fasteners, which are made from bicycle spokes or steel wire, the walls and bottom must be assembled into a single structure. The mesh for the upper part of the device is made of steel wire.

Fourth option

The wood chip stove created using this method is also a foldable structure, however, this heating device differs from its predecessor, described in the previous method, in a more complex internal structure.

To make a heating device, you need to use sheet stainless steel or a thick sheet of aluminum. The design of the oven consists of four side faces, a bottom and additional upper supports intended for cooking, heating water, frying meat, etc. All side walls of the structure are attached to each other with furniture or any other movable hinges. The bottom is fixed to one of the walls by means of a hinge, while a stopper should be provided on the opposite side for reliable fastening of the bottom structural element. There must be a shutter on the firebox door that will prevent the flame from escaping out.

As you can see, the manufacturing process of a wood chip stove is very simple. Anyone can repeat it House master having necessary tools and materials.

Sometimes it is vitally necessary to quickly warm up using a fire without lighting big fire, heating water or food without the expense of gas or in case of an acute shortage of firewood is sometimes simply necessary hiking option heating and cooking or fire element. In this case, the wood chip stove, survival stove, or, in other words, Bond’s stove will save you. Such a device will become an assistant both on a hike and at the dacha to heat a kettle or cook food, without taking up much space when folded, and without requiring as much fuel as a gas burner.

Homemade wood chip stove

Similar design It is difficult to find on sale, unlike a burner, so the easiest way is to make a wood chip stove with your own hands. First of all, it is worth considering the advantages of this design:

The wood chip stove provides good draft. This suggests that any fuel is suitable for quickly lighting the stove, and you can get maximum thermal energy.
It can be safely lit in places where it is prohibited to light an open fire - after the wood chip stove there are no smoldering coals left and no flames emit.
It will easily fit into a travel backpack due to its compact size.
When advancing extreme conditions outdoors, you can use dry fuel or alcohol from a survival kit to light a wood chip stove.

The design and design features of a camp stove-wood chipper are such that, when assembling its frame from metal sheets, holes remain below for air access, and air circulation and combustion temperature are increased with the help of a raised bottom above the ground, not exposed to its humidity. The top walls of the stove are solid, protecting the fire from the wind. They are connected by rods or a metal grid on which you can place dishes or a kettle.

To ignite a turbo stove, wood chippers use: wood chips, dry small firewood, branches, brushwood, cones, tree bark, dry fuel, including sawdust in briquettes, and alcohol.

DIY wood chip stove

To be completely confident in the quality of the manufactured stove, you can first sketch out drawings of the future design. A wood chip stove can be made from scrap materials, there are several examples:

Stove from a washing machine drum

Wood chip stove from an old washing machine drum

Using a grinder, part of the stainless metal is cut off from an old washing machine that has outlived its useful life. You will need a stainless steel strip 18-20 cm wide, which will determine the height of the stove. The length of the strip should be 65 cm, and you need to twist a pipe from it. On the side, the structure is equipped with a hole with a door, which, in the open position, serves to store firewood, and when closed, directs all the heat upward. Stepping back 5 cm from the top, you need to make holes for the skewers, and equip the upper part with a wire rack for dishes. A grate with three holes is equipped at the bottom for installing pegs that fix the stove in one position.

Stove made from a cutlery stand

In many hardware stores or departments specializing in the sale of tableware, you can find round stands for drying stainless steel cutlery, equipped with holes along the entire surface. On the side of the product, you need to mark the place of the cut with a marker for laying firewood inside the structure, then carefully cut out this place with a grinder. Four bolts with nuts are screwed to the bottom, which will serve as legs for the stove. You can make a grill out of metal rods by inserting them through the top holes.

Wood chip stove from a can

Oven from tin can

The simplest option using scrap materials is a wood chipper from a can. To make it you will need a regular can, along the perimeter of which holes are made for air circulation. This miniature design is suitable for heating a mug of water using wood chips or dry fuel.

Foldable design

Turbo stove-wood chipper

The turbo stove wood chipper is made from metal sheets up to 1.5 mm thick. To do this, a sketch of the future design is first made, then applied to a sheet of metal. Holes for bolts are cut out on the sheet and the edges are aligned. You should get five parts: four side parts and a bottom, as well as additional elements, such as the top rack for dishes, firebox, fastenings for installation on the ground. To make the structure easy to unfold, the side parts are fastened furniture hinges. The bottom is secured with hinges, and the firebox is equipped with a small bolt to prevent the door from opening spontaneously.

The design can be improved by giving it a pyramidal shape - this way it will become more stable, and larger fuel can be placed underneath. At the same time, draft will improve, and the fire will concentrate under the cookware thanks to the tapering upper part. You can use unnecessary window or balcony sills as a scrap material. From it you need to cut four trapezoids and one square. Holes for the chimney are cut in the upper part of the trapezoids, and in one of them there is a hole for the door. The square part is also drilled into many holes, then all the elements are connected to each other with piano hinges. A square grate is attached to one of the trapezoids, and a door is attached to the other. For greater convenience, before manufacturing this structure, it is necessary to make detailed drawings.

Often, for trips to, just in nature, you have to take a gas burner with you. But gas burners have some disadvantages - not all gas cylinders work well with negative temperatures, gas cylinders cost money, but not little. In this case, wood burning comes to the rescue. wood chip stove. This is a great alternative to gas. However, in fairness, it is worth noting that this is not an absolute replacement for gas, since in some cases gas-burners still cannot be replaced with anything, for example, when hiking in the mountains, where there is no vegetation and you can only use gas.

Actually, the name and design wood chip stoves completely transparent:

This is a kind of wind protection frame with a grate and a system of latches for assembling this construction set (sometimes even a transformer). Firewood consists of chips, twigs, cones and other small things from the pasture.

Allows you to cook economically and quickly in areas where there is a shortage of firewood. All stoves use natural draft, not supercharging. A practical and viable option for equipment for tourism, hunting, fishing... German soldiers used such stoves in the days. But there is also a drawback - the fuel in such a stove burns out quickly. It needs to be thrown frequently, which means there should be a person on duty near the stove.

The material for the stove shown below was an old road sign "Give Way":). But a stove can be made just as good from stainless steel household appliances, for example, an old washing machine.

In this article I will tell you about such an irreplaceable thing as a wood chip stove, which will become a faithful companion and helper on any hike or fishing and hunting. The stove has a simple design and runs on available fuel.

If you decide to make it yourself, this process will not take much time, effort and materials. This and the other useful information you will also find in this article.

The wood chip stove is good alternative gas burner, because when you are away from civilization, it is very difficult to find where to buy gas cartridges for a gas burner.

And taking a whole backpack of cartridges with you is not a very good idea. This is where a wood chip stove comes to the rescue, helping you to heat or cook food.

The wood chip stove works great on small twigs, cones, dry fuel and other similar types of fuel.

Unlike a pyrolysis stove, a wood chip stove, although with difficulty, can operate on damp fuel. And this makes it more versatile and attractive for tourists. After all, for example, in winter it is very difficult to find dry branches, pine cones, etc.

The wood chip stove allows you to cook economically and quickly in areas where there is a shortage of firewood. The stove uses natural draft rather than forced air.

A practical option for equipment for tourism, hunting and fishing. An indispensable thing for cooking in the field.

A well-designed stove directs almost all the heat from combustion to heat the cookware.

That is, you do not need to build large fires to boil a relatively small amount of water. Wood chips, twigs, cones, etc. are used as firewood.

When hunting, fishing and on a camping trip, it is vital to quickly warm up and prepare food when there is an acute shortage of fuel; perhaps without leaving the tent.

At the dacha - in the summer, cook dinner or boil water without wasting gas, without starting the house stove or without building an outdoor summer house.

The choice of one or another portable compact heating and cooking device or campfire equipment is another matter.

But in any case, a device known as a wood chipper or Bond stove will help out: such a stove using waste wood fuel can be built from scrap materials, using only a knife, it is omnivorous and in some, the most difficult cases, it can properly perform its function in places where wood fuel no and cannot be.

A country stove-wood chipper weighs up to 1.5-2 kg when folded and has a volume of less than 2 cubic meters. dm allows you to cook soup for your family; the portable one is three times lighter for preparing one serving and when folded it takes up 0.2-0.3 cubic meters. dm.

The cost of high-quality materials for a durable wood chipper is unlikely to require more than 300 rubles, and you can almost always get by with free spare parts.

For reference: a more or less reliable all-weather gas burner will cost from 1000 rubles; You will need to purchase an additional 3 liter cylinder for it. All this equipment will pull (with a filled cylinder) 4-5 kg and take up the same amount of cubic meters. dm.

The oven has a simple device.

Furnace running cylindrical from a pipe or rectangular section from individual elements.

The height of the device is usually about 200 mm.

The lower part of the stove is equipped with an improvised grate; there are holes in the side surface for supplying combustion air.

The upper part is made in the form of a grid - dishes with water or food are placed on it. There is a cut in the side surface rectangular hole for loading fuel. The hole is usually equipped with a door. Segments are often cut along the top edge to accommodate skewers.

The stove has legs - this provides a gap under the grate for air supply and ash from burnt firewood. Good stability of the stove is also necessary - if the supports are weak and uneven, it can tip over.

Types of wood chip stoves

There are several types of wood chips:

Sliver candle.
Folding rectangular.
Folding pyramidal.
Folding triangular.
Under a metal cup.
Under the pot.

Advantages of a wood chip stove

The main advantages of the wood chip stove are as follows:

Proper manufacturing of the stove will ensure good draft. This means that any available combustible material is suitable for lighting this stove and obtaining maximum thermal energy from it.
The wood chip stove does not emit open fire into the surrounding area and does not leave behind coals, so it can be used in areas where lighting an open fire is prohibited.
Thanks to small sizes, the wood chip stove can easily fit into a tourist’s backpack.
IN emergency situations When it is not possible to find a suitable fuel material, alcohol or dry fuel can be used to operate the wood chipper.

Super-light and super-durable, the universal wood chip stove is your faithful companion on a hike of any complexity.

Made of titanium, the wood chip stove, complete with any of your mugs, is useful for cooking food, boiling water and will allow you to quickly get a source of heat in any conditions.

The original design of the stove allows you to concentrate heat, intensify and protect the fire from the wind - and this with the very minimum amount of fuel!

Using a dry piece of cloth will protect your hands from a hot mug - just wrap it around the mug and put it on the stove. You can easily cool the liquid if you wet the same patch.

A wood chip stove will come in handy for disposing of small garbage while camping, can work as a candle light, or heat water for a container with insecticidal aromatic oils.

A camping stove consumes minimal fuel to ignite good flame, you will need a small armful of dry wood (chips, branches, spruce needles, cones, bark, etc.).

DIY wood chip stove

Very often there are situations in everyday life when it is enough to use minimal resources to solve a particular problem.

For example, in order to boil a kettle or heat up lunch in garage conditions, in the country or on the river bank, there is no need to build a powerful stove.

To do this, it is quite enough to make a small stove with your own hands, which will perfectly cope with the responsibilities assigned to it, using wood chips, tree branches, pine cones, etc. as fuel.

The wide popularity of small stoves, indispensable when camping or fishing, is due not only to their simple design, which does not contain batteries and electronic circuits management.

Demand small ovens due to wide possibilities their practical application, as well as ease of manufacture.

Every home craftsman can make a compact wood chip stove if he has the source material, the right tool and necessary skills.

The wood chip stove is a compact mini stove that allows you to quickly cook food on the go.

In addition to its compactness, the wood chip stove has another very important advantage over traditional stoves; it does not require a lot of firewood to operate; just a few handfuls of wood chips, small twigs or dry bark are enough. This allows you to use the stove on a camping trip in places where there is no possibility of finding firewood and opportunity to make a fire.

Materials for making a wood chip stove

Wood chip stove from a washing machine drum

Using a grinder, part of the stainless metal is cut off from an old washing machine that has outlived its useful life.

You will need a stainless steel strip 18-20 cm wide, which will determine the height of the stove. The length of the strip should be 65 cm, and you need to twist a pipe from it.

On the side, the structure is equipped with a hole with a door, which, in the open position, serves to store firewood, and when closed, directs all the heat upward.

Stepping back 5 cm from the top, you need to make holes for the skewers, and equip the upper part with a wire rack for dishes.

A grate with three holes is equipped at the bottom for installing pegs that fix the stove in one position.

Wood chip stove from a can

The simplest option using scrap materials is a wood chipper from a can.

To make it, you will need a regular tin can, with holes made around the perimeter for air circulation.

This miniature design is suitable for heating a mug of water using wood chips or dry fuel.

You can not only make a wood chip stove with your own hands, but also buy it in a store.

Advantages of the stove:

Compact and low fire hazard, moreover, fuel for it can be found in any forest. At the same time, the efficiency of burning wood in such a stove is much higher than in a fire, but lower than in a turbo stove.
A wood chip stove is not an open fire, which means you can safely heat or cook food on it during fire season.

The wood chip stove has only one drawback - it is not suitable for large groups. One or two people - that’s the whole group that a wood chip stove can serve.

A wood chip stove, which can be purchased in a store, is usually made of technical stainless steel sheets 1 mm thick. and has a quickly assembled design.

This design is very light and compact, consists of several flat parts and is suitable for tourists, cyclists, hunters and fishermen.

This wood chip stove is certainly not a pyrolysis stove, but it has advantages over a pyrolysis stove and is quite capable of replacing gas burners, and in places where there is a lot of wood, it is simply a necessary thing.

The small and medium wood chip stoves are equipped with covers for storage and transportation.

Wood chip stove under an army cauldron

The army pot is very practical, does not take up much space, you can boil water in it, heat it up or cook food.

In camping conditions, to make a fire you will need to prepare dry firewood, which is not always possible, especially after rain or snow.

An alternative to a fire is a wood chip stove; all you have to do is pour wood chips into the stove, light it, and put the pot on.

Manufacturing stages:

Making a wood chipper is not difficult; all you need is a piece of tin or thin metal from which you need to cut out the stove parts.
Make drawings on a sheet of metal, then use metal scissors to cut out blanks where you need to drill holes with a drill.
After that, the workpiece must be attached to the pot and given a shape that follows the contours of the pot.
The wood chip stove for the army cauldron is ready for use.

You can also purchase a ready-made oven. The original oval pyrolysis stove, a wood chipper, will replace a fire for cooking on an army pot.

Advantages:

A reliable, durable pyrolysis stove for use in tourism, hunting and fishing, rafting and in mountainous areas, where there is a shortage of firewood.
Uses natural traction.
High efficiency, economical fuel consumption, less firewood is required than on a fire.
The temperature during the cooking process can be controlled by the fuel supply.
The fuel for the stove is wood chips, twigs, cones, etc.
During transportation, the pot is placed inside the stove.
For transportation, the stove is packed in a case.