An infinity mirror is a newfangled home decoration that is very popular due to its unusual appearance. The illusion of infinite depth, which is its “trick,” is deceptive, because the thickness of the product is only a few centimeters. How to make an infinity mirror with your own hands and is it really that difficult?
Design features with infinity effect
Similar mirrors have successfully found application in the form stylish countertops, wall panels, and ceiling lamps. Their feature is clear glass, on the one hand, and a mirror surface on the other. The product is called the Gesel mirror or “Spy mirror” and is quite rarely found in stores, and if sold, it is at a steep price. Fortunately for those who want to decorate their home with it, the design is not complicated, and doing it yourself is quite possible.
How to make an infinity mirror with your own hands?
All that is needed to implement the plan is the acquisition of simple materials, a little patience and perseverance. The mirror can be any size and shape of your choice and can also have different shapes inside.
What materials will be needed?
To make it, you can take it as a translucent mirror, the device with which can be turned off and used as classic product, and mirrored on one side and transparent on the other. In general, the list of materials looks like this:
- ordinary mirror;
- sheet of window glass;
- polystyrene foam and a knife for cutting it;
- putty and spatula;
- mirror film;
- sandpaper;
- LED garland;
- glass cutter, marker, suction cup and jigsaw.
The thickness of the glass is preferably at least 4 cm, since in this case its strength will not be in doubt. To avoid dust and save energy, you can purchase it with pre-treated edges.
Step-by-step assembly instructions
The chosen design is a round infinity mirror, but any other shape is made according to the same principle. So, you will need:
- Draw a regular circle of the desired size on the glass with a marker, then use a glass cutter to make slits along its contour. Next, you need to lightly and carefully tap under the grooves until cracks appear, then put the material on a towel and break off excess pieces.
IMPORTANT. On initial stage you need to be as collected and attentive as possible, since glass is fragile and the shape of the circle can be broken. As a result, the diameter of the future mirror will significantly decrease, and the amount of time spent will increase.
ADVICE. During the process of gluing the mirror film, air bubbles may form underneath it. To avoid this, you need to smooth it out from the center to the edges with a bank card or something like that.
The final stage is assembling all components into a single structure and connecting the LED strip. In order to be able to hang a mirror on the wall, special fasteners are purchased at a hardware store. Before gluing them, the back wall is wiped with a solvent.
Deciding on the light source
LED Strip Light - best option, since after assembly the entire structure is sealed and the light source should not emit heat. Preference should be given to RGB, which will allow you to create incredible optical effects. Products with a voltage of 24 V have maximum brightness, and it is also easier for them to shine through a mirror film. In order not to waste time and nerves on manipulating the LED strip, you can purchase already ready-made option, equipped with a controller, in the store. Thus, the process is simple and does not require special skills and experience - just spend a little time and effort. As a result, you will receive a stylish mirror with an infinity effect that will decorate your home and will delight guests with its unusual appearance.
Order a sample
* Your personal data is used solely to communicate with you, without transfer to third parties.
You can make your interior stylish and unusual using infinity mirror, which creates a visual illusion and amazingly transforms the room.
Thanks to the tunnel effect, such a mirror expands the space and amazes the imagination with its bottomless depth. Moreover, the darker the room, the more mysterious the volumetric reflection will look, lost in the twilight.
 |
 |
The cost of a tunnel mirror depends on its size:
| Size(mm) | 600 x 800 | 700 x 700 | 800 x 800 | 900 x 900 | 900 x 1000 | your size |
| Cost, rub.) | 19200 | 19600 | 25600 | 32400 | 36000 | Great Dane |
Such a decoration will look very impressive in a club, hotel, bar and any other establishment where all the most original and fashion trends design.
Infinity Mirror will give any interior an ultra-modern look and fit perfectly into the futuristic style. With its help you can transform a wall, ceiling, bar counter or countertop. This is one of the most spectacular and fashionable ways revitalize and visually expand the room.
The appearance of depth of reflection, that is, the effect of an infinity mirror, is created using bright LED lighting and multiple reflections of light in two parallel mirror surfaces.
How is the "infinity" effect achieved?
Mirrors have different transmittance and reflection coefficients. On the back wall there is an ordinary mirror with a reflection coefficient of 100%. The front part of the mirror is one-way glass, through which only 50% of the light passes and is reflected. LEDs are placed along the perimeter between these two parts.
Thus, infinity mirror effect is that you can see each multiple reflection of a light source, but the brightness of each subsequent image is reduced by 2 times. The observer sees an endless cascade of lights receding into the darkness. The backlight can be single-color or multi-color at the request of the customer. The thickness of the mirror panels varies from 5 to 10 centimeters, creating the appearance of bottomless depth.
The infinity mirror "Tunnel" is equipped with adjustable backlight brightness using a remote control remote control. The brighter the light, the stronger the illusion of depth. When the backlight is turned off, the device looks like this. You can change the lighting modes and color transitions, and some models have a “music” mode, in which the LEDs blink in time with the music playing.
Using an unusual mirror in interior design.
The shape, size and design of this unique decorative item are chosen individually and are limited only by the customer’s imagination. You can experiment with the infinity mirror effect by placing one shape into another (for example, a circle into a square or vice versa) and thus complicating the optical illusion. Such experiments will be of particular interest to designers who are ready to turn the most daring ideas into reality.
By purchasing this product, you will add a touch of novelty to your home and will definitely be satisfied. You can purchase this stylish thing not only for yourself, but also as a gift to loved ones or work colleagues. Such a pleasant surprise will amaze your friends and will be remembered for a long time.
To order a Tunnel mirror, you just need to select its size, shape, number and color of LEDs, type and shade of frame (wood or metal), features for adjusting brightness and level of reflection depth, as well as installation location (wall, ceiling, countertop or even floor).
You can purchase an unusual mirror on ours. We professionally manufacture and process glass products and offer our customers elegant, exclusive products that combine beauty and excellent quality. Our factory has high-precision equipment at its disposal, which allows us to carry out work quickly and without the slightest defect.
- spy glass with titanium coating
Every owner wants to add a touch of originality to their interior. And everyone has their own methods for this. Some people come up with original design rooms, thanks various forms ceiling and walls, while others opt for One of these interior items that will catch the admiring glances of your guests will be a table with an infinity effect.
What is the secret?
The infinity effect is achieved through the use of LED technology. They are the ones who can decorate your home, and in some cases even change it beyond recognition. A table with an infinity effect, the photo of which is presented in this article, is a modern, innovative piece of furniture that can change the idea of design of even the most notorious skeptic.
The secret of visual infinity is hidden in the use of LED backlighting, and color solutions there can be a huge variety. It is this that is built into the space between the reflective surfaces. As a rule, the top mirror is translucent so that the radiation from the LEDs is visible to others.
To control the backlight, use a special remote control or, if you made a table with an infinity effect yourself, an on/off button.
Where can the table be used?
The use of tapes with is absolutely safe for human health and environment, so the infinity table can be positioned anywhere. In addition, such lamps are famous for their durability and efficiency. A product with a tunnel effect will serve you well long term, thanks to its reliability and ease of use. This table can be seen in:
- modern apartment;
- country house;
- nightclub, bar or restaurant;
- hotel;
- office.
How to make an infinity table yourself
The price for such a piece of furniture is not encouraging, and the purchase is not always affordable for the average resident of the country. However, you can get an unusual thing if you know how to use tools. Just make a lighted table yourself.
For this you will need following materials and tools:
- boards for the table;
- mirror and glass (the latter can be replaced with a translucent mirror);
- LED Strip Light;
- self-tapping screws;
- screwdriver
All wires are mounted in the table legs.
First of all, you need to develop a drawing, taking into account all the dimensions of the future piece of furniture. From MDF (or wooden planks), mirrors need to be made according to your calculations. Wooden templates with an internal hole there should be 3 pieces, one of which is approximately 1 cm larger inner diameter. This is where the LED strip will be located. The resulting blanks need to be glued together, not forgetting to insert one mirror between the two lower templates. Then you need to carefully smooth all sides and corners.
Next you need to attach the cover. It would be better if it was removable. This will provide access to electricity. This cover for the future table can be decorated to suit your interior. You can paint it or decorate it in any other way.
In the opening of the table cover it is necessary to drill holes that are necessary for attaching the LEDs. Now you can insert the tape into this opening and secure it in a way convenient for you. The best option would be to use glue, the effectiveness of which you will be 100% sure of.
Now you should cover it all with a second mirror, translucent.
All wires are routed through the table legs. To do this, they must have a wide cross-section and through holes.
As a conclusion
To enhance the effect or make it more original, you can put absolutely any object between two mirrors. This is done to ensure that the infinity table fits perfectly into the overall concept of your room.
In addition, you can safely combine LEDs of different shades. Connecting pieces of tape is not difficult even for an inexperienced craftsman.
A similar effect can be used not only to make a table, but also to decorate doors or any other surfaces. A table with an infinity effect, made with your own hands, can be just the beginning.
IN Lately decoration has become very popular modern interiors"infinity mirrors" The design is based on an LED strip, which is often used by interior designers to bring their most daring and creative ideas into reality.
In this article we will reveal all the nuances of making such an unusual lighting design the rooms are like an endless well of light. You will learn what it is and how to make such a mirror yourself.
From the article you will learn how many mirror surfaces are needed to create a light tunnel with luminous points, as well as what materials are needed and how to make a lamp with an eternal effect with your own hands.
What is a mirror tunnel with 3D lighting in reflection?
An infinity mirror is a reflective surface in which we see multiple reflections that do not actually exist.
This effect can be achieved by using bright light from third-party sources and their repeated reflection in 2 mirrors that are installed parallel to each other.
Theoretical basis of the infinity effect
More our ancestors used the illusory effect of an infinity mirror(during fortune-telling at Christmastime, the girls placed a burning candle between two mirrors). Infinity in reflection from a mirror surface arose due to multiple reflection of the light source from a real and imaginary mirror.
If you are interested in how a real and imaginary reflective surface have the same optical properties, a textbook on studying quantum physics will help you.
How to do it yourself?
Your task is to create a flat reflective surface, looking at which the optical illusion of an infinite mirror will appear. To make it you will need:
- Mirrors (2 pcs).
- Light source.
Naturally, you can always resort to the ancient methods of our grandmothers and build a mirror system open type, in which the focus of the viewer's gaze will be parallel to the mirror planes. In this case, the height of the lamp will be equal to the width of the reflective surface, which a priori will not be very convenient.
Our goal is a mirror plane that will not reduce the height of the room. To create it you need an optical system closed type, in it the person’s gaze will be directed perpendicular to the mirror surfaces.
One of the mirrors must allow a portion of photon ducts from the light source to pass through; if you do not follow this point, you will not be able to make and see an infinite mirror.
For self-made light well you will need:
Implementation of 3D design
You can build a structure with the optical illusion effect of an “infinity mirror” different ways, depending on the type, quantity and quality of materials you have. Further in the article you will learn one of the most simple ways to create a light tunnel.
Mirror surface
To get started, buy a classic mirror(you can cut existing ones to the required size). Then, the question arises - where can I get a second reflective surface with a partial mirror effect?
The answer is quite simple - you will need glass with a density of 3-4 mm; a translucent reflective surface can be obtained by covering it with automotive window tinting film. Perfect option– a film that transmits 50% of light.
Frame
To make a base that will hold the mirror system, purchase wooden blocks, the side of which will be equal to 2-3 cm. In order to qualitatively and reliably attach such a frame to the mirror surface, use sealant on silicone based, ideally if it is colorless.
Before you begin, you need to make a hole in the frame made of wooden blocks using a drill, which will be parallel to the mirror plane. Through the hole you need to pass the power supplies of the diode wire.
Do not rush to attach all the slats at the same time; glue them one by one, parallelly aligning the bars along the outer edges of the mirror surface.
Source
After completing the assembly process, the cavity of the optical illusion system will become airtight and as airtight as possible.
The only light source in such a system can be one that does not emit heat. The most suitable option for such a design there is a strip with LEDs, ideally RGB - it will allow you to create various optical effects in the tunnel.
Also pay attention to the operating voltage rating of the LED strip, it should be equal to 24 volts. Such tapes are among the brightest, which will allow them to penetrate as much as possible through such an obstacle as a tint film.
Assembly
Let's break down the assembly process light tunnel. You are required to be extremely careful, attentive, and have all of the following materials at hand.
- Armed silicone sealant, glue the frame slats one by one to the mirror (from the side of the reflective surface).
- Take RGB LED tape, and carefully attach it to the surface of the frame from the inside, pass the power cord through the hole in the rail, which must be made before assembling the frame.
- Cut a piece of tint film that matches the width of the frame structure.
- Apply silicone-based sealant to the wooden frame, then place the glass covered with film on top so that it rests with the mirror side inside.
And finally, the final stage of assembling the structure. In it you will learn what to do with the ends that are left open, and what is needed to close the wooden frame.
- If the wooden blocks were well processed and the work was done carefully, you can simply paint them over, choosing the appropriate shade.
- If your interior is made in Hi-Tech style, you can decorate the light tunnel stylishly and beautifully using a regular aluminum profile.
- Also ends wooden frame can be covered with cable channel made of plastic, after removing the cover.
Silicone-based sealant is ideal for fastening all of the above materials.
Belt design options
The most simple option The location of the LED strip is to run it along the entire perimeter of the wooden frame. Visual effect with this arrangement it will look like many identical rows of light, standing next to each other.
If you want to make a more interesting and effective light tunnel, attach it to mirror surface using sealant, several geometric or some other shapes, they must be made from the same wooden slats.
Attach a strip of LEDs along the entire perimeter of your inserts. Be sure to pay attention to ensure that its length is a multiple of the distance between all mounting points along which it will be possible to cut in the right place.
Using a diamond-coated drill, you need to make a hole in the mirror and pass the light source power wire through it.
Connecting LED strip
When the RGB LED strip is connected directly to the power supply, it will emit white light. When connected using a controller, you can create a variety of color effects. This the control device works in tandem with the remote control. But if you want to see color music, you need to choose models that are compatible with a computer.
Useful video
We invite you to watch a video on how to make a mirror with an infinity effect with your own hands:
By
Ideal pocket light for makeup application
Illuminated mirror for daily skin care and cosmetic application
Small pocket mirror with bright LED backlight will help you put your makeup in order even in pitch darkness. The lower mirror is a magnifying one. A pocket mirror with light is an indispensable accessory for facial care while traveling.
BUY FOR 212 - 217 RUBLES with free delivery by Russian Post
BUY FOR 213 - 219 RUBLES with free delivery by Russian Post
By
DIY illuminated mirror In this project, I will show you how to make an elegant, real bathroom mirror with hidden LED lighting. Firstly, it looks very beautiful, and secondly, it is an excellent decorative element for the bathroom. Quite simple to make and if you have hands, it should not cause any particular difficulties. So, let's begin!
First, I purchased a regular ready-made mirror, with a polished edge, measuring 91.4 x 76.2 cm.
Then I picked up necessary tool: Reinforced tape, electrical tape, knife, plastic packaging film, 1m long metal ruler, respirator and safety glasses. Please note that the knife must be hard and very sharp, it is best to use stationery knife with thick blade and metal blade holder. You will also need a small sandblasting machine and an air compressor.
For sandblasting machine, it is best to use dry, white quartz sand. But since I didn’t have it, I used regular yellow, after sifting it through a fine metal mesh to remove debris and large fractions.
Then, turning the mirror over with its back side up, using reinforced tape, I made a preliminary stripe, which will later be highlighted with front side. The inside of the square on the mirror is covered with fabric or any other suitable material. To prevent it from flying away, I taped it with adhesive tape. To prevent unsealed areas, I also covered the middle of the broken strip with adhesive tape.
Having secured the metal ruler with clamps, I cut through the reinforced tape, according to the markings I had made earlier. I advise you to be sure to securely fasten the ruler, otherwise it may move and the knife blade will move to the side. Also, to make a perfectly even cut, I recommend using an additional block with which you will hold the knife blade on the other side of the ruler. Be very careful at this stage, as any unnecessary scratch will then be clearly visible from the front side of the mirror, and this will no longer be correctable!
Then remove the tape from the cut areas. You should get an even strip around the entire perimeter. Make sure that the entire remaining surface is securely sealed, as this strip will be sandblasted later.
Using a sandblaster, remove the back coating from the mirror around the entire perimeter within the cut strip. I had the mirror covered in two coats, blue paint and a reflective silver coating. Therefore, in order not to damage the glass, I removed both coatings in two steps. When working with a sandblasting machine, be sure to use a respirator, safety glasses and gloves, as you will even get sand in your ears!
After finishing processing the mirror, you should get something like this:
Next, empirically select the internal distance around the perimeter from the transparent strip at which it is best for you to place the LED strip. By changing the distance, you can optimally select the brightness of the backlight.
I then made the back frame from red oak lumber. You can use the size of the bars at your discretion, the main thing is that they are higher than inner sheet MDF (will be discussed later). Using a cutter, I made grooves on the bars in advance for tight installation of the back cover and opened them with black paint and varnish on the end and back outside. The size of the back frame is determined based on the size of your mirror; my frame, for example, is 3 cm smaller than the mirror itself around the entire perimeter.
Cut the back cover to fit your back frame. In order for the lid to fit tightly into the frame, at the last stage, you specially made grooves in the bars, i.e. your lid fits flush with the frame. I used an old piece of plastic for the cover, but any strong material that can support the weight of the mirror will do.
Then, to mount the LEDs, I cut a rectangular piece from 1/2″ thick MDF. The size of this piece depends on the internal distance from the transparent strip where you decide to install the LEDs. In my case, the rectangle turned out to be 1.5 cm smaller from the perimeter of the transparent strip. I carefully glued a cut piece of MDF in the center of the mirror, keeping equal indentations on each side, using mastic (you can use suitable glue or epoxy resin). Then I glued the outer rear frame in the same way.
From the inside, on the end of the outer and inner frame I pasted LED strips with a warm white glow. The transformer for powering the LEDs was moved outside the mirror, although if you tried, you could have placed it inside. The wire from the LEDs was brought out through the back wall so that it was not visible.
Then I installed it on the wall and the back cover homemade mount. The mount is on the back cover, secured with short self-tapping screws that reach the MDF, but do not reach the mirror. I recessed the transformer into the niche where the socket is located, since I specifically installed such a socket. As a result, after connecting the transformer and connecting it to the outlet, I got this unique mirror!