There are several types of hygienic treatment of the shower stall. Routine cleaning consists of taking care of the tray and walls of the chamber immediately after visiting it. Basic care is performed when soiled, approximately once every 2 weeks. General cleaning is carried out in cases where the cabin is too neglected and needs a thorough cleaning. Routine and basic processing is not particularly difficult, while planned cleaning must be carried out with all precautions.
Effective ways to clean a shower stall
There are folk and purchased funds To rid the cabin of limescale, let’s look at them in more detail.
After each hygienic cleaning, do not close the door, leave the cabin to be ventilated. Upon completion of the procedure, wipe the walls and tray dry to avoid the formation of mold and plaque.
Take precautions before using cleaning products. Wear safety glasses, silicone or rubber gloves, protect your respiratory tract (mini-respirator, disposable mask, cotton bandage, etc.).
Acidic compounds
An important aspect of the use of acidic products is considered to be their caustic composition, which corrodes upper layer. As a result, you need to carefully monitor the exposure time without violating it.
The most effective formulations include Domestos, Sarma, Triumph, Komet, Faberlic, Chistin, and Aist Ultra.
Regarding the technology of application, it is not particularly difficult: apply the required amount of the composition to the pan, walls and other places of contamination. Wait half an hour (the exact period is indicated on the back of the bottle), rinse off first with cold, then warm water.
Oxalic acid
Processing the shower cabin in this way is carried out in 2 stages. The composition does not corrode the coating, but it should be applied with caution to rubber and silicone seals. In shops household chemicals a solution of oxalic acid with a concentration of 6-8% is sold.
Dilute it with purified water in a ratio of 5:1, then soak a foam sponge or cotton cloth in the mixture and cover the affected areas. The holding time is 10-15 minutes, based on the condition of the plumbing.
After this period, thoroughly rub acrylic tray, walls, plumbing. Soak a soft cloth in ammonia, repeat the previous steps, and leave for 5 minutes. Rinse off excess cleaning products with contrasting water (first cold, then warm).
Do not confuse a solution of hydrogen peroxide with peroxide; the concentration of the second composition is 12 times higher than that of the first. Combine 280 ml. purified water, 80 ml. hydrogen peroxide and 55-60 gr. loose gelatin. Wait a quarter of an hour until the mass swells, then put on gloves, take a sponge and scoop up the product with it.
Distribute the mixture in generous quantities to the areas of plaque formation, wait about 8-12 hours, depending on the degree of damage. During the entire period, do not open the cabin doors and do not use it. After time has passed, rub the areas with a foam sponge, rinse with water, and wipe dry. If necessary, repeat the procedure.
"White"
Chlorine-containing preparations have long been very popular among housewives. They are able to cope not only with mold and rust, but also with limescale. First, wipe the cabin dry, then put on gloves, goggles, and a gauze bandage. Soak a cloth in bleach or spray the product using a dispenser bottle.
The exposure time ranges from 3 to 5 hours depending on the amount of flight time. After applying the product and waiting time, do not rush to wash off the composition. Fold the gauze in several layers, rub it on the affected areas, and evaluate the result.
Dishwasher Cleaner
Purchase a gel for treating PMM at a hardware store aimed at removing scale (Finish, Fairy Platinum, etc.). Treat areas with limescale with pure ammonia, rub with a sponge, wait 30-40 minutes. Now rinse off the mixture with cold water, cover the contaminated area with car cleaning gel, and at the same time distribute it over the entire surface.
The mixture will begin to drain; you need to refresh it within 45-60 minutes. For convenience, pour the solution into a bottle with a dispenser. After treating the shower cabin with a clean composition, mix 200 ml. gel with 60 gr. gelatin, wait for it to swell, then apply to the surface and leave for 6 hours.
Wine acid
The resulting product includes abrasive particles that negatively affect the structure of the enamel. For this reason, it is highly not recommended to use the composition at frequent intervals. Mix 80 g into one mass. tartaric acid, 110 ml. ammonia. Then add baking soda until it forms a paste.
After preparing the composition, protect the skin of your hands, eyes, and respiratory tract, moisten the area with limescale with vodka or ethyl (medicinal) alcohol. Scoop the mixture with a kitchen sponge, spread the mixture over the surface, wait a quarter of an hour, and rinse. Carry out the steps again, but increase the exposure time to 2-3 hours.
Hydrochloric acid
If it is not possible to purchase hydrochloric acid in liquid form, purchase powder. Dilute 70 gr. preparation with purified water, scoop up the resulting porridge with a gauze cloth or bandage, rub the affected areas for about 5-10 minutes, then wait another half hour, rinse with warm water, then hot water.
Important!
When treating a shower stall with this method, wear a medical bandage or respirator. Otherwise, hold your breath and do not breathe in volatile vapors. Since the drug corrodes the enamel and the top layer, the method is designed to emergency cases, when other technologies have not given full results.
Carbonated drinks
On the World Wide Web you can find a sufficient number of videos in which Fanta, Sprite or Coca-Cola corrode limescale, mold, and rust. To prepare a “vigorous” mixture, mix 600 ml into one solution. imported drink, 160 gr. baking soda, 65 ml. table vinegar (6-9%), 50 gr. citric acid. Transfer the mixture to plastic bottle, seal, shake several times.
Bring the container to the area with limescale, open the lid and spray the surface. Close, shake again, repeat until you have used all the ingredients.
If after these procedures the contamination is not completely removed, prepare the solution again by adding 70 g to it. gelatin. When the mixture swells, cover the desired area with a generous layer, leave for 6-8 hours, remove any residue with hot water.
Table vinegar
You can use either a vinegar solution (9% concentration) or an essence. In the first case, combine 300 ml. product with 150 gr. washing powder, in the second case, mix 100 ml. essences with 300 ml. filtered water and 120 gr. dishwashing liquid.
When the mixture is ready, wait until the crystals dissolve, wet the sponge, and treat all areas where limescale deposits have accumulated. If necessary, perform the previous steps 3-5 more times until you are satisfied with the result.
Limescale is rightfully considered a difficult-to-remove contaminant. To effectively clean the shower stall, use ammonia, wine or hydrochloric acid, vinegar essence, carbonated drinks, hydrogen peroxide or chlorine-containing preparations. Take precautions.
Video: how to clean a bathtub without chemicals using folk remedies
All housewives, without exception, are faced with cleaning every day, be it a light cleaning routine or a general cleaning of the house. Some women claim that the most difficult thing they find cleaning is the bathroom, and in particular it is very difficult to keep the shower stall clean. After reading this article, you will learn how to easily and in a minimum amount of time clean your shower stall from plaque at home.
Used folk remedies to combat stains on the shower stall
The modern market offers a huge range of household chemicals that can wash away absolutely any contaminants. But, as practice shows, the use of most chemicals has Negative influence on human health. That is why many modern housewives prefer to use folk remedies to clean the shower stall of dirt. All housewives who use basic means at hand to combat pollution note their high efficiency and absolutely harmless effect on the body.
Citric acid can be used to wash away almost any contaminant, as it has proven itself to be effective remedy against soap marks, greasy stains and limescale. To prepare the solution, you will need to take one tablespoon of lemon juice per glass of plain water. It is better to use hot water, stir and make sure that the acid is completely dissolved. If granules remain, they may scratch the surface. Using a regular dishwashing sponge, begin to gently wash the dirty surface. If the degree of contamination is too high, then you will need to thoroughly moisten the surface and leave the solution there for 10 minutes. At the end of this time, begin to intensively rub the surface. When finished, wash the cabin with running water.
If you were unable to achieve the desired result the first time, you can repeat this procedure again. As an alternative to citric acid, you can safely use freshly squeezed lemon juice.
Vinegar against limescale
To remove plaque from a shower stall using vinegar and water, you will need to prepare a solution in a 1:1 ratio. The prepared solution should be carefully applied to the contaminated surface and left there for 10 minutes. Then, carefully rinse off the remaining vinegar clean water and wipe the surface with a dry cloth. This recipe can be used regularly as it will not discolor or dull the glass surfaces of your shower stall.
Any experienced housewife knows that soda can quickly deal with a variety of stains, even stubborn ones. To quickly clean a dirty shower stall with baking soda, you will need to first wet the dirty area and gently apply a little baking soda to it. Then using soft fabric begin to gently rub the surface. With the very first movements, you will see how dirt is immediately removed without leaving any traces behind. But it should be said that when you use this product, do not forget that it has abrasive properties and can leave behind small scratches.
At home, you can use not only toothpaste, but also tooth powder to clean surfaces. This product will quickly deal with stains on metal or acrylic surfaces. Toothpaste can easily cope with plaque on the tray in the shower stall. So, to do this, the paste must be carefully applied to dirty areas and left there for 15 minutes. After this time, remove any remaining toothpaste using a soft brush. Along with the remaining product, plaque on the shower stall is also completely eliminated. An important advantage of this product is that it does not have an abrasive effect, therefore it can be used to clean any surfaces and it does not leave any traces behind.
Soda + peroxide
You can also use a mixture of baking soda and hydrogen peroxide to clean the shower tray. This product completely eliminates fungus and mold, which very often appear in the corners of the pallet. The principle of operation is very simple, you just need to pour baking soda onto the contaminated areas and leave it there for 10 minutes. After this, thoroughly clean the surface and apply hydrogen peroxide. Do not wash off the tray under any circumstances; it must be left to dry. This product will help get rid of any fungi.
Ammonia for cleaning showers
Ammonia is considered a very effective remedy for soap stains. But, for greater efficiency during cleaning, ammonia can be used in combination with other cleaning products, in particular we are talking about vinegar and soda. To prepare such a cleaning solution you will need to take 100 grams of ammonia, two liters of water, 50 grams of soda and the same amount of vinegar. Mix all components thoroughly. The resulting solution is enough to completely get rid of limescale both inside and outside the shower stall.
Vodka
Probably the strangest, but at the same time effective, method for cleaning glass is the use of ordinary vodka. To prepare a vodka cleaning product, you will need to take two tablespoons of water per one tablespoon of vodka. The resulting mixture will quickly remove soap deposits from not only the glass surface, but also faucets. Vodka is also ideal for cleaning chrome surfaces of taps and shower heads.
Avoid using highly aggressive chemical substances, such as:
- Formic acid;
- Formaldehyde;
- Acetone;
- Petrol.
Other cleaning methods
- Steam generator. If you have a steam generator at home, it will clear plaque and deposits much faster than folk remedies. Slowly move the steam generator along the walls, then immediately wipe with a dry, clean cloth.
- Melamine sponge. Lightly moisten the booth with water, wipe with a sponge, and rinse thoroughly.
In conclusion, I would like to say that it is better to care for the shower cabin using the above-listed folk remedies. Since such cleaning will cost housewives much less, moreover, such products are completely environmentally friendly and do not harm human health.
Having installed a shower stall in the bathroom, when cleaning they often wonder how to clean soap stains, rust spots, lime marks on walls, doors and other elements. Cleaning products must not only be effective, but also safe for the materials from which the cabin is made. A large assortment in the household departments makes it easy to select the most suitable ones.
During operation, dust settles on plumbing fixtures, deposits and stains from detergents accumulate, and drying drops of water leave traces of salts and rust particles. The faster surfaces become dirty, the more often routine and general cleaning must be done. What determines the speed at which the shower stall becomes dirty?
Supplied water quality
Water supplied to houses through a pipeline is different regions varies in hardness. Water becomes hard as it percolates through limestone and chalk deposits and becomes saturated with minerals.
Such water leaves traces in the form of plaque on the walls and shower tray, scale in kettles and water heaters, and clogs small holes in the shower head.
The quality of water is also affected by the pipes through which it is supplied. If they are worn out, a rust-colored liquid with an unpleasant odor enters the apartment. Such water leaves yellowish marks on all surfaces with which it comes into contact, white plumbing is especially affected.
Availability of filters
The negative impact of poor quality water can be mitigated by installing filters. It is optimal to connect several filters at the input that perform coarse and fine cleaning.
Care products used
Plumbing fixtures will get dirty faster if the cleaning products and tools are chosen incorrectly. Abrasives and hard brushes damage the surface, leaving scratches, sometimes even invisible to the eye, in which already noticeable dirt accumulates.
Prevention
With the help of preventive measures, you can avoid many problems associated with dirty showers. For example, ventilation, airing and wiping the walls dry after a shower will help prevent the appearance and development of fungi and mold, which prefer excess moisture.
How to choose a shower cleaner
When choosing cleaning products for your shower stall, you need to take into account the materials from which it is made. For different surfaces Various cleaners are suitable. Which material the product will clean most effectively and which can damage it is indicated on the packaging or in the instructions.
Review of popular cleaning products
To get rid of soap stains, limescale, and traces of rust, there are many cleaners, ranging from professional household chemicals to improvised means. There are gels and liquids with a narrow focus to combat a specific type of pollution, but you can also find universal ones.
Store products
When purchasing cleaning products in the supermarket, you should give preference to liquid and gel-like consistency. Such cleaners will not harm the surface, unlike abrasive powders, which can scratch the material of the shower cabin when used. Among the huge range of cleaning sprays, gels and liquids, you can choose a product suitable for a specific shower stall, focusing on composition, effectiveness, ease of use and cost.
Cif
In order to clean the shower stall from plaque and dirt, Cif is well suited. It is applied to the surface, wait a little, then wipe off with a soft sponge or cloth. No rubbing or effort required. The advantages of the product include pleasant aroma, deep and gentle cleansing, antibacterial and whitening effect. There are different types of Cif detergents on sale, differing in packaging, smell and functionality. This is convenient because you can choose exactly the one that is optimally suited for a particular case: “Antinalet”, “Max Effect” with a whitening effect or a universal gel.
"Mister Muscle"
A product that can be used to clean not only the glass walls of the shower cabin, but also the taps made of of stainless steel, tiles, toilets, sinks. The versatility of the cleaning product allows you to save your budget and space on the shelf for household chemicals, because instead of several specialized cleaners you can purchase one universal bottle of “Mr. Muscle”. Available in the form of a spray or gel, which cope equally well with soap scum, traces of water exposure, rust, and have an additional antibacterial effect. Apply the product to a horizontal surface, wait for a while, and wipe with a sponge.
"Akrilan"
"Bagi Akrilan" is a product that effectively copes with soap stains, limescale and deposits, stains on metal surfaces, mold. Spray it onto the contaminated surface, where it foams, leave for a few minutes, and then wash off. The aroma of the liquid is not strong.
Tilex
American shower cleaner. After taking a shower, spray the spray onto the walls of the shower stall and close it, after which there will be no streaks left from the water, all surfaces sparkle, and the smell is pleasant. The big advantage of the liquid is that it does not need to be washed off, which saves a lot of time.
Folk remedies
There are many products that can help clean your shower stall without using household chemicals. Calcium and magnesium salts, which form the basis of plaque on the walls and shower tray, easily dissolve under the influence of acids. The use of many improvised means available in the arsenal of housewives is based on this principle.
Table vinegar
Vinegar is chosen for cleaning showers for several reasons:
- Availability. Vinegar is available in the kitchen of most housewives.
- Budgeting. The product compares favorably in cost with professional household chemicals.
- Hygiene. Destroys up to 90% of viruses and bacteria on the surface being cleaned.
- Efficiency. Easily dissolves deposits of mineral salts and also adds shine to chrome elements.
- Does not leave a matte film on the surface, which sometimes happens when using chemicals.
For treatment, it is convenient to fill a spray bottle with a mixture of 1 part vinegar and 2 parts water, with which the solution is sprayed onto the walls and shower tray. After 15 minutes, wash off with clean water.
For severe lime deposits, you will need a more concentrated vinegar solution (one to one with water) and a longer exposure time.
Problem areas are treated with a cloth generously soaked in the solution, left for several hours, after which they are washed well. If the part unscrews, you can remove it and completely soak it in a vinegar solution. Do not forget about protective gloves - acetic acid causes irritation if it comes into contact with the skin.
Lemon acid
Citric acid is similar in effect and method of use to acetic acid. Bag food additives dissolve in a glass of warm or cool water and spray the liquid onto contaminated surfaces with a spray bottle. After a quarter of an hour, the product is washed off and wiped dry. If the plaque does not respond the first time, the treatment is repeated with increasing concentration and exposure time. To increase efficiency, add 20 grams of soda to a solution of citric acid and water.
Instead of powdered acid, you can use fresh lemon juice in the ratio of one lemon to half a glass of water. The solution is also treated with a spray bottle, or simply applied with a sponge soaked in it. Chrome parts can simply be wiped with a slice of lemon to shine without further rinsing.
Vodka or alcohol
The main advantage of alcohol is that it not only cleans, but also disinfects. Ethyl alcohol and vodka containing it in its composition work well with soap stains. To clean the shower stall, prepare a solution of 1 part alcohol and 2 parts water, wipe the contaminated areas with a cloth soaked in the mixture and wipe dry with a cloth.
The solution can be improved by adding additional ingredients to it:
- A spoonful of vinegar will make cleanup easier, enhancing the effectiveness of the mixture.
- 30 ml of glycerin in the solution will help create a glossy film with a double effect. Firstly, the surface acquires a beautiful shine. Secondly, the finest protective film repels soap and mineral salts, preventing the appearance of plaque.
Toothpaste or powder
Do not use colored toothpaste to clean white surfaces; it may stain the acrylic. White paste or powder will perfectly remove limescale and rust without damaging the surface. The paste is spread over the problem area with a sponge, if necessary, left for a while, then washed off. The powder is poured onto the surface, the dirt is gently rubbed with a damp cloth, then removed with a sponge.
Ammonia
Ammonia will cope with soap stains brilliantly in the literal sense of the word: after treatment, the surface will simply shine.
To clean, dilute a tablespoon of ammonia in a liter of cool water and wipe the surface with a cloth soaked in the solution.
To combat old stains, vinegar and soda are added to the ammonia solution. You need to place 4 tablespoons of ammonia, 1 tablespoon of soda and 1 tablespoon of vinegar in 2 liters of water, mix everything and treat with the solution problem areas. After ten minutes of exposure, the product is washed off. Ammonia has a very strong and pungent odor; you need to work in a well-ventilated area, preferably with an open window.
Hydrogen peroxide
By treating the walls, tray, and faucets with hydrogen peroxide, you can get rid of limescale. To do this, wipe with a napkin soaked in the product. problem areas. The exposure time is determined by the degree of contamination, from several minutes to several hours.
If you combine hydrogen peroxide with baking soda, you can get rid of blackheads of mold. The surface is moistened with water, cleaned with soda, washed off, and then treated with peroxide. The last remedy does not need to be washed off.
Daily care
If you take care of your shower stall after every shower, you won’t have to deal with old lime deposits and soap scum. This is especially true for regions with hard water, the dried drops of which are very difficult to wipe off from the glass walls of the shower stall and return them to transparency and shine. After taking a shower, you need to thoroughly rinse off the remaining soap, shampoo and shower gel from the walls of the shower stall, and then wipe dry.
Required Tools
To care for your shower stall, you will need tools that will provide high-quality, but gentle cleaning, and also save effort and time. In order not to damage the surfaces, do not use hard brushes, especially metal brushes, for cleaning, preferring soft ones.
Soft cloth and microfiber
Solutions and mixtures are applied with a cloth to soften deposits; the rag soaked in the solution is left for some time to act. The same tool is used for subsequent removal of detergents, wiping walls and trays, and wiping surfaces dry with a dry cloth. A microfiber cloth perfectly removes drops, which will help avoid dirt marks where they dry.
Spray
Used for spraying cleaning products, including homemade ones, onto walls, doors, trays and hard-to-reach places. Suitable for liquid mixtures only.
Rubber scraper
A rubber scraper is convenient for removing plaque from glass walls. Optimal because it does not leave scratches.
Foam sponge
The sponge is used to apply cleaning products, wipe off dirt with the rough side after exposure, and also wash off the residue. A soft sponge will not damage the surface of the shower stall.
Toothbrush
Relatively soft bristles are suitable for rubbing small stains and are convenient for processing seams and joints. On large surfaces, scrubbing surfaces is labor-intensive.
spring-cleaning
Despite regular and daily care, the shower stall requires general cleaning every 7-10 days, during which each element is thoroughly cleaned, Special attention paying attention to joints and hard-to-reach places. If necessary, treatment is carried out against microbes, fungus and mold, as well as prevention of their occurrence.
Cleaning walls and plastic elements
By rinsing the inside of the cabin every time after a shower, you can get rid of soap stains, but this will not save you from the appearance of traces of dried drops. At spring cleaning The walls are washed using cleaning products that contain substances that will help dissolve lime deposits. Fruit acids are effective in this regard.
Door washing
Cabin doors are washed inside and out, both open and closed. Depending on the materials from which they are made, they choose an effective and safe remedy. Most often you can find doors made of glass, triplex and plastic.
Triplex and plastic
Elements made from these materials must be cleaned with a product that does not contain active acids, alkalis, alcohol or formaldehyde. Cleaning powder with its abrasive particles will also not work. It is most convenient to use a cleaner in the form of an aerosol, which can be sprayed even onto a vertical surface. After application, the product is wiped off with a rubber scraper. If the dirt is strong, repeat the cleaning, leaving the washing liquid to dissolve the plaque for a while.
Glass
Many products are suitable for glass, since this material is completely unpretentious. You can use any professional cleaner or remove plaque with vinegar and citric acid. It is recommended to wipe glass doors at the very end of general cleaning, so that no splashes from cleaning other elements remain on the already cleaned glass.
Cleaning chrome elements
Most often, in shower cabins, a mixer, a shower head, various nozzles (for example, a hydromassage system), a mixer, holders and shelves are made of chrome-plated steel. After each shower, it is recommended to rinse them and wipe them dry with a soft cloth. During general cleaning, chrome elements are cleaned with special metal cleaners and polished.
From soap stains
To clean chrome parts, you can only use gentle products with a liquid or gel-like consistency. Abrasives are strictly prohibited. Wash the elements with a soft sponge or microfiber cloth.
Salt coating
It is important to remove deposits formed by calcium and magnesium salts deposited on metal parts in a timely manner. If this is not done, limescale not only spoils the appearance of chrome elements, but also reduces their service life. Cleaning must be careful and gentle; based on this, professional or folk remedies are chosen.
Clogged holes
Holes in the shower head or whirlpool head become clogged especially in areas with hard water. They are cleaned with vinegar solution. You can unscrew the element and place it entirely in the solution, but if this is not possible, moisten it generously with a cloth and leave it to act. Cleaning the holes with a needle or sharpened toothpick is effective.
How to wash a tray
In order to properly wash the tray, it is necessary to take into account the material from which it is made. As a rule, pallets are made of earthenware, tiles, acrylic, cast iron, ceramics, and enameled steel. When choosing detergent and tools, it is important not only to ensure impeccable cleanliness, but also not to damage the surface.
Faience and tiles
For tiles and earthenware, there are many products that can effectively remove limescale and rust particles. Choose the optimal size bottle with a convenient dispenser, suitable for price and quality.
"Santry"
“Santry” is universal in the form of a transparent gel, almost odorless. With its help you can clean earthenware, tiles and the seams between tiles from soap deposits and lime deposits. To better scrub the seams, it is convenient to use an old toothbrush. The product is convenient to apply thanks to the “spout” dispenser. It is left on the dirt for a while, then washed off.
"Sanelit"
Oxygen gel "Sanelit" is a universal cleaner intended for cleaning bathtubs, sinks, toilets, tiles, faucets from rust, lime deposits and soap smudges. Is a thick liquid blue color without a pungent chemical odor, which is undoubtedly one of the advantages of the product. Another advantage is that the gel acts gently on the surface without damaging it. To clean, apply the product evenly to a surface previously moistened with water, and after 10-15 minutes wipe with a sponge and rinse with water.
Kiilto Clean Laattapesu
Finnish-made acidic detergent designed for cleaning the surface of ceramic tiles, suitable for removing rust and calcium carbonate deposits from tiled surfaces ceramic tiles, and from sanitary porcelain.
Before applying the product, the surface to be cleaned should always be wetted with water. For normal cleaning, Kiilto Clean Laattapesu is diluted with cool water: 25-50 ml of product per 5 liters of water in a plastic container. The product is applied to the surface for 10-20 minutes, after which it is washed with plenty of water. Using a brush or sponge improves and speeds up the effect of the product. To remove heavily adhered rust or limestone, Kiilto Clean Laattapesu can be used undiluted.
HG
The Dutch manufacturer HG presents a whole line of professional cleaning products that are on sale in 45 countries, including Russia. You can choose narrowly targeted products for specific materials and tasks; there are also universal ones, for example, “Universal Cleaner for Bathroom and Toilet,” which is used to clean all surfaces in the bathroom and toilet, including chrome surfaces, stainless steel, ceramics, tiles. , glass surfaces, plastic.
The cleaner is used concentrated or diluted with water in a ratio of 1:10 (1 part product, 10 parts water). The product is applied with a sponge and left to act for several minutes, after which it is washed off from the surface with plenty of water.
Mapei Keranet Liquido
Mapei Keranet Liquido is an acid-based ceramic tile cleaner. The basis of the product is a special organic acid, which, in its effect on various stains and salt deposits, is an analogue of such highly concentrated acids as hydrochloric or sulfuric acid, but, unlike them, does not emit toxic fumes. At correct use Mapei Keranet Liquido does not damage the joints between ceramic tiles, even if colored grout was used to fill them; on the contrary, this composition removes salt deposits that sometimes form on the surface.
Keranet Liquido should be applied with a cloth or brush and left for 5 minutes, then cleaned with a brush or medium-hard abrasive sponge. Removing all the sediment that forms, continue to rinse until all visible stains disappear. For more persistent formations or stains, the operation must be repeated.
"Shining tile"
A product designed for cleaning tiles will pleasantly surprise you with its cost. The consistency is more liquid than gel-like, so it is convenient to apply it with a spray bottle. After applying the washing liquid to the contaminated area, leave it for some time to act, rub the old deposits with a sponge, and rinse with water.
Domestos
The product not only helps to cope with limescale and rust, but also disinfects the surface being treated, killing viruses and microbes. The Domestos line includes products of different composition, consistency and purpose, which will allow you to choose the most suitable one. Remembering to put on rubber gloves before cleaning, apply the cleaner to the problem area, wait until it dissolves the dirt, and rinse off.
Acrylic
The acrylic tray must be washed very carefully. If the upper protective layer, the contamination will freely penetrate deeper, and it will no longer be possible to eliminate it. Accordingly, abrasives and hard brushes are strictly contraindicated. There are many products that are suitable for gentle but effective cleaning.
Star-Acrylat
Like any cleaning product, apply to the surface, leave for 10-15 minutes, then rinse off.
Sarma
“Sarma” product for plumbing is not suitable for acrylic coatings, although other surfaces will be cleaned of all types of contaminants. The product does not contain chlorine, has a convenient dispenser, and has an antibacterial effect.
Amway
Bathroom cleaning composition from Amway is a powerful concentrated product that removes traces of soap scum and other deposits, in particular limescale, without the use of harmful abrasives, quickly and effortlessly. To clean the surface, the product is diluted and sprayed onto the contaminated areas using a special spray gun from Amway, then wiped with a damp sponge or rag.
Acryl-Net
The product is suitable for acrylic bathtubs and pallets, other synthetic surfaces, chrome, stainless steel. The gel effectively removes dirt, plaque, and adds shine. Acryl-Net must be applied for 5 minutes, after which the surface is rinsed and allowed to dry.
Cilit Bang
Active foam for baths and showers penetrates deeply and removes soap scum and dirt, and has an antibacterial effect. Conveniently spray on the surface, where it is left for a while and washed off.
Enameled
Enameled steel pallets are quite unpretentious; you can choose different cleaning agents for them, including in powder form. They should be cleaned regularly as stubborn dirt is difficult to remove.
"Comet"
Available in the form of gel, spray, powder. Copes perfectly with traces of rust, limescale, and soap stains. Has an antibacterial effect.
"Pemolux"
Ideal for cleaning enamel trays. Despite the fact that the soda in the composition scratches the surface a little, the product will clean the surface well, especially on not very new pallets.
Soda with citric acid
Soda and citric acid are mixed with water to a creamy consistency, then applied to the enamel surface for 10 minutes, then washed off.
How to unclog a drain
Soap deposits accumulate in the drain, hair and threads get caught, and small objects can get stuck. All this leads to a blockage, which you can remove yourself or call a specialist. It is preferable to use the services of a plumber if the blockage is serious, especially if it is caused by a stuck solid object. There are several ways to clean the drain yourself:
- Remove the siphon, clean and wash it thoroughly, and put it back in place.
- Cleaning the drain with a plunger, followed by rinsing with hot water.
- Industrially produced plumbing cable or made from scrap materials.
- Household chemicals. Choose a gentle product that will remove dirt but will not damage plastic pipes.
It is better to clean the drain regularly, about once every two months, without waiting for a clog. This will help maintain hygiene and avoid unpleasant odor from the drain hole, extend the life of the shower cabin as a whole.
Getting rid of limescale in the shower
To get rid of salt deposits in the shower, which form limescale, you can use any of the above professional or folk remedies suitable for the surface components shower cabin. It is important to do this regularly, since old plaque is more difficult to get rid of than fresh plaque.
Fighting mold and rust
The fight against mold and rust should be carried out on a regular basis, not forgetting preventive measures. Mold loves high humidity, so you need to ventilate the cabin well and wipe the internal surfaces dry each time after use. It is convenient to treat hard-to-reach places against mold with steam if you have a steam generator.
If it is not there, it is better to regularly go over all seams and joints with an old toothbrush moistened with any antifungal compound.
A folk remedy that contains 2 parts vinegar, 2 parts ammonia solution (ammonia), 1 part soda helps against mold. A mixture is prepared from the components, the areas where black spots of mold are noticed are cleaned, and after a while they are washed off.
Traces of rust can be left on the walls and pan by water flowing through rusty pipes; they often appear at the junction of the faucet or other metal parts, and also appear on the shelves from the bottoms various means care Rusty marks should be erased as soon as they are visually detected. suitable means, do not forget to thoroughly wipe problem areas during each general cleaning. As a preventative measure, it is recommended to wipe dry metal elements and their attachment points after each shower.
If you take proper care of your shower cabin in a timely manner, it will last a long time, delighting the eye with cleanliness and neatness. Knowing which products are most effective can make quality cleaning much easier. Regular cleaning and maintenance of the shower cabin will allow you to spend a minimum of effort and time, getting maximum results.
The most common problem that almost all owners of shower cabins or an ordinary bathtub with a tap often encounter is the formation of limescale. It can be cleaned with many available means: from baking soda and vinegar to all-purpose cleaners. The only thing: before choosing this or that product, it is recommended to take into account the properties of the materials from which the shower tray itself and its doors are made, so as not to disturb all the aesthetics appearance and preserve their original brightness and shine. In the materials of the presented review, we will consider in more detail how to clean a shower stall from limescale, and what the most effective cleaning products exist.
Caring for such a comfortable bathroom is divided into three types:
- Daily cleaning. It is carried out every day, immediately after hygiene procedures. First, rinse everything in the booth with hot water, then rinse with cool water and wipe all surfaces with a dry cloth.
- Basic cleaning, which is recommended to be carried out no more than once a week using cleaning components. At the end of cleaning all surfaces, they should be thoroughly rinsed. warm water, then wipe everything with a dry cloth.
- Intensive cleaning, consisting of the use of more aggressive cleaning agents, is required in cases where there is a strong limescale deposit or when it has not been used for its intended purpose for a very long time.
Cleaning hydromassage jets
Unfortunately, the water that comes from the water supply system contains a high concentration of various salts, which contributes to the formation of limescale or rust not only on the surfaces of the washing “cabinet”, but also on plumbing parts. But what causes the most trouble is the appearance of a dense white coating inside the hydromassage nozzles. To clean the nozzles from this nuisance, you can use one of the specialized anti-limescale products for shower cabins, which are sold in every household chemical store.
If such a remedy is not at hand at the right time, then you can use warm vinegar, which should be used to thoroughly wipe the problem area and leave for 10–15 minutes to corrode the plaque. Then you need to use a sewing needle to clean all the holes and rinse everything with warm water.
Cleaning the lime off the walls of the cabin
Very often, lime deposits form on the walls of a bathroom or shower stall, which can be easily removed with folk method, which consists in using citric acid, which every good housewife has. In order to effectively clean limescale formations on the surface of the walls of the shower stall, you should:
- In 500 milliliters hot water dissolve one sachet of citric acid weighing 100 grams or 4 x 25 grams.
- Pour the resulting solution into a spray bottle, apply spray waves to the affected areas and leave for a few minutes.
- Then wipe the treated areas with a dry, clean cloth.
Using this solution will not cause any harm to health, and it is quite simple to use in practice.
But there are times when hard-to-remove limescale stains appear on the walls of the shower stall, which cannot be removed without the use of more aggressive cleaning agents, the aromas of which many people experience allergic reactions to. To prevent the occurrence of allergies, if the financial side of the family’s well-being allows it, it is recommended to acquire a steam generator, with the help of which you can get rid of contaminants of any complexity in a fairly short period of time without any problems.
If it is not possible to purchase such a device, then you can use other home methods folk recipes that effectively help fight limescale:
- Anti-scale agent added to a small amount of hot water will help to instantly remove limescale deposits on the walls of a shower stall or bathroom. With the resulting product, while it is still warm, you need to wash all contaminated areas. Then wipe everything with a clean cloth or sponge. It is important to avoid getting this solution on rubberized parts.
- It will help to wash away stubborn stains on the surface of the walls in the shower stall quickly and effectively. toothpaste or silver polishing.
- A warm solution of citric acid or table vinegar will help remove scale.
How to remove limescale from glass
Many modern shower stalls have glass doors, which are not easy to clean, but also pleasant. You can wash glass doors or walls with almost any glass cleaner: universal aerosol or folk ways. Among the specialized means, the most effective are:
- Sanelit;
- Mister Muscle and others.
If there is no specialized cleaning product in the house, you can resort to using your grandmother’s method. To do this, it is recommended to prepare a glass of a solution of water and citric acid in a 1:1 ratio. Instead of lemon juice, you can also use vinegar. Apply the resulting product to the walls and glass doors of the booth and leave for 12-15 minutes. After this, the treated surfaces should be washed with plenty of clean water, wipe with a dry towel and polish with a soft cloth.
Cleaning the tray
When cleaning the shower stall, many housewives wonder how to wash the shower tray? Before you begin eliminating limescale, you need to determine what material this part of the shower stall is made of. The pallet can be made from the following types of materials:
- faience;
- acrylic;
- ceramics;
- cast iron;
- enameled steel.
Acrylic tray
Acrylic is considered one of the most capricious materials, when cleaning which it is not recommended to use cleaning powders, hard brushes, as well as detergents containing acetone, alcohol, formaldehyde, formic acid components and alkali.
Despite all the capriciousness, acrylic is still very warm and good material. It is recommended to remove various stains from it by using a clean soft cloth or sponge, which is first recommended to be soaped with laundry soap. Limescale deposits from acrylic can be easily removed using any dishwashing detergent, as well as a toothbrush and toothpaste, which is recommended to be first applied to the problem area, left for a few minutes, and then thoroughly brushed and rinsed with water.
On the shelves of modern industrial stores is presented wide choose specialized products for cleaning and washing acrylic bathtubs and trays. In most cases, such substances have a creamy structure, which simplifies the method of their use. It is enough to apply this product with a cloth or sponge to the contaminated area, leave for 15–17 minutes, and then simply rinse everything off with water.
In more severe cases, when there is a strong deposit of limescale on the shower tray, you can use silver polish, but first you should study all the information on how to clean a shower stall using this product.
Stone tray
If the pallet is made of natural stone, then maintenance is minimal. He keeps all his color features throughout the entire period of its operation, no matter how many years have passed. When limescale forms on natural stone This can be effectively and easily removed using a clean cloth and a steam cleaner. In rare cases, a chemical cleaner may be needed.
If the pan is made of an artificial type of stone, then such a plumbing product may darken over time. And in order to restore the tray to its former brightness, it is recommended to clean it with a concentrated toilet cleaner, after first protecting the surface of your hands with rubber gloves. After cleaning, the tray should be thoroughly rinsed with water.
Enameled tray
An enameled tray is a sanitary product made of enameled steel or cast iron, which is then coated with an enameled paint composition. When caring for and cleaning such a tray, it is not recommended to use chemicals that contain the following components:
- sulfuric acid;
- alkali;
- formaldehyde;
- hydrochloric acid.
The most effective means of combating plaque and dirt on the enamel surfaces of the pallet is the use of Pemolux or Comet.
You can also use folk remedy cleaning enamel surfaces, which can easily be prepared at home. To do this, mix soda and citric acid with water to the consistency of a thick paste. After this, it is recommended to apply the resulting mixture to the stained area for 30–35 minutes, after which it is rinsed off with running water.
Using Melamine Sponge
If there are no modern cleaning products in the house, no soda, no vinegar, then you can use a melamine sponge, with which you can easily get rid of limescale on the walls and chrome parts of the shower stall.
With its help you can easily remove the following types of contaminants without any detergents:
- soapy white stains;
- traces of fat;
- rust spots;
- as well as limescale.
Simply moisten the edge of the sponge a little in warm water and rub the stained area in a circular motion, then wash the area with a clean cloth and water.
Traditional methods
Before purchasing an expensive cleaning product from the store to remove limescale deposits and other types of dirt in the shower stall, you should consider more available methods removal of contaminants from among folk recipes.
- Hydrogen peroxide and baking soda will help quickly remove limescale and mold in the corners of the cabin. To do this, sprinkle the stained area with baking soda and leave for 30–35 minutes. Then clean the problem area with a sponge and spray hydrogen peroxide directly on top of the remaining baking soda and leave until completely dry. Then remove everything with a dry cloth and rinse the booth with running water.
- The best way to remove soap stains from glass surfaces is with strong vodka or alcohol. In order to prepare an effective glass and mirror cleaner, vodka or alcohol must be diluted with water in a ratio of 1:2. The resulting solution will also wash chrome items well.
- Limescale, rust and mineral deposits can be effectively removed by the famous Coca-Cola carbonated water. To do this, moisten a sponge with it and treat the contaminated area, then leave the drink for 30–35 minutes and rinse with running water.
- Ammonia is considered no less effective, as it can easily remove all soap stains. But to get rid of old stains, it is recommended to combine it with baking soda or table vinegar.
Cleaning black mold
If a zone has formed in the shower stall in which water regularly accumulates and stagnates, a black coating of mold will certainly form there after a short period of time. To eliminate such contamination, it is recommended to mix equal parts of table vinegar and ammonia. Apply the resulting solution to the formed mold using a brush, after which it is recommended to rinse the treated area soda solution, to prepare which you should dilute a teaspoon of baking soda in 200 milliliters of water.
A little practical advice How to remove limescale deposits in a shower stall as effectively as possible is presented in the following video:
Dear visitor! If you know other methods on how to remove stains, please leave your experience in the comments.
Compact and functional shower cabins appeared in the apartments of our compatriots relatively recently, but quickly gained popularity due to their practicality, convenience and space saving. It’s hard to argue with the fact that they look more modern and technologically advanced than bulky ones. cast iron bathtubs, primitive plumbing “mastodons” from the century before last. However, caring for a shower cabin turns out to be more labor-intensive and multi-stage than the usual treatment of a bathtub, faucet and shower with cleaning powder, which takes up experienced housewife no more than ten minutes.
And how to clean a shower stall for the same a short time when it consists of many completely diverse elements, each of which requires individual approach to hygienic manipulations? Shower head, taps, walls and doors inside and out, tray, shelves, hooks and holders, mirrors and glass, distant hard-to-reach corners - this entire arsenal, made from completely different materials, requires carefully thought-out cleaning tactics and strategies, tools , special detergents and a certain skill.
Despite the fact that the shower stall is a small home studio of cleanliness, it itself gets dirty and loses its well-groomed appearance quite quickly. And the reason for this, oddly enough, is primarily water. Our tap water, unfortunately, contains many mineral compounds, calcium and iron salts, which settle on surfaces, forming limescale, rust stains and other not very pleasing to the eye visual effects. Soap, toothpaste, gels and shampoos also leave their mark, especially on shiny chrome parts. In general, the picture emerges as unsightly, which means it’s time to think about how to clean the shower stall to return it to its radiant cleanliness and pristine glamorous luster.
Three types of cabin cleaning
Theorists household, who love to catalog and put everything on shelves, identify three types of care procedures for a small home “temple of hygiene”:
- 1 Current cleaning. This is a set of simple actions that we perform after each visit to the shower stall: we rinse the entire internal surface, first with hot and then with cold water, and then wipe all wet surfaces dry. This does not require much time, and other types of cleaning in the future are much easier than washing the shower stall, in which drops of water, containing a significant part of the elements of the famous table, collected and dried for several days periodic table elements.
- 2 Basic cleaning. We carry it out as it gets dirty, at intervals from once a week to once a month, depending on the number and general soiling of users, the cosmetics they use, water hardness, condition water pipes and other polluting factors. During the procedure, we wash, clean, and wipe off everything that has become dirty. Plain water cannot remove many contaminants, including limescale, so we use various detergents and cleaners, sponges, rags, brushes and rubber glass scrapers as necessary. At the end, as usual, rinse and do not forget to remove all drops of water that have settled on the surfaces.
- 3 General cleaning. This is intensive care, necessary when the cabin is very dirty and needs radical cleaning (for example, it has not been used for a long time, it has been wet, and mold has appeared in it); we use potent products, all available equipment and rubber gloves. If you don't neglect two previous types cleaning, then general cleaning is required very rarely and only in force majeure situations.
After use and cleaning, leave the stall door slightly open and periodically ventilate the bathroom. This will prevent excess moisture and prevent the development of mold and fungi, which destroy the material from which the cabin is made and leave stains that are difficult to remove.
Chemical attack on the problem area
How to clean a shower stall from limescale deposits that cannot be removed with a simple soap solution or regular detergents?
On the modern market there is a sufficient range of special products for removing lime deposits in the form of liquids, gels, pastes, powders or sprays. Products in spray bottles (atomizers) are especially convenient for shower cabins: they allow you to quickly apply the product over the entire surface and even in hard-to-reach places. Sprays do an excellent job of removing stains if you carefully read the instructions on the packaging, but they can be toxic. Remember that when you wash the inside of the cabin with a product that has a strong pungent odor, do not keep the doors closed, otherwise you can be seriously poisoned by inhaling tiny drops of detergent. Be sure to rinse treated surfaces thoroughly with water. Avoid using products that contain:
- aggressive solvents (for example, acetone or gasoline);
- formaldehyde;
- formic acid.
These components are not only extremely harmful to human health, but also damage most shower enclosure coatings.
When using chemicals, pay attention to whether the recommended frequency of use is indicated on the packaging.
Some products are toxic and are intended only for radical struggle with plaque during general cleaning.
Do not use abrasives (powders or pastes) to plastic surfaces, they can leave micro-scratches into which dirt will then become clogged.
How to remove lime with folk remedies
How to clean limescale from a shower stall without using chemicals? There are products that have been tested for generations and worked properly even when shower cabins were not even in the design.
- 1 Soda. Regular baking soda, also known as sodium bicarbonate. This beneficial white powder has many little known amazing properties, but any more or less experienced housewife knows that it perfectly scrubs off even very stubborn stains. But proceed with caution; baking soda may scratch some surfaces, particularly plastic.
- 2 Vodka. Mix 2 tbsp. l. water and 1 tbsp. l. vodka: this mixture will perfectly clean glass, mirrors, shiny chrome surfaces of taps, mixers and shower heads.
- 3 Tooth powder or paste. They are good at removing dirt from metal or acrylic surfaces and do not have such a pronounced abrasive effect as soda.
- 4 Vinegar. It dissolves limescale as well as rust. Acetic acid is so strong that it dissolves even a thick layer of scale in a kettle. Spray contaminated surfaces with it from a spray bottle, leave for half an hour and rinse with warm water - the effect will be impressive. Vinegar can be used to clean lime-clogged holes in shower heads and hydromassage jets.
- 5 Citric acid. Also an acid, it acts in the same way as vinegar. Dissolve 1 tsp. in a small amount of water, treat the surfaces, wait 10 minutes, rinse with water, admire the result. You can make an effervescent cocktail “Goodbye lime!”: 30 g citric acid, 20 g soda, glass warm water. Shake, process, wait 10 minutes, rinse, enjoy cleanliness.
- 6 Ammonia. Particularly effective in combination with other means. Try mixing 50 g of soda and vinegar, 100 g of ammonia and 2 liters of water - this mixture is enough to treat the entire shower stall inside and out.
Other cleaning methods
Steam generator. The cleaning process using even the simplest household steam generator takes several times less time than other types of cleaning.
Melamine sponge. These miracle sponges can be used even without detergent; they work great on their own, removing plaque with a couple of light movements.