It's no secret that upon completion repair work the remaining materials end up in the house. Thrifty owners are in no hurry to get rid of these things. It turns out that you can make a lot of crafts from them.
Pieces of pipes and extra fittings are no exception. Crafts made from polypropylene allow you to realize any fantasies and make useful things for household use with your own hands.
We invite you to read the article.
DIY polypropylene chair
Crafts in the form of chairs from polypropylene pipes It is easy to install with your own hands, for this you need to prepare:
- medium-sized trimmings and fittings suitable for them;
- plywood and, if desired, you can add foam rubber;
- upholstery fabric;
- hacksaw, stapler and self-tapping screws.
The sequence of actions when creating a chair with your own hands:
- Legs are constructed from pipes and fittings using a soldering iron.
- A square or rectangle of the required size is cut out of plywood, it is covered with foam rubber and upholstery fabric. The fabric must be prepared in such a size that it can be secured with reverse side parentheses.
- The seat is secured to the legs with self-tapping screws.
- The back is made in the same way.
Video: making a chair with your own hands
How to use leftover polypropylene pipe materials in the garden
Crafts in the form of multi-tiered beds
DIY crafts made from polypropylene pipes turn out to be necessary and practical. This also happens when there is little space on the site. From such pipe-rolling products you can build beds consisting of many tiers.
Setting up a garden bed is not very difficult. Pipe products are prepared for them large diameter. They are laid on the ground, where the top part is cut off. This is done along the entire length of the product. And holes are drilled from below at equal distances.
The bed blanks are attached to the installed frame, and a drainage layer and soil are poured into them.
These buildings do not occupy a large number of squares, the plantings in them do not create shade for each other, and they can be easily disassembled and assembled.
ADVICE. Such a bed can be built even on a balcony, and then the house will always have its own freshly harvested greenery.
Video: Vertical bed
Alcove
These structures on outdoors require good materials for construction, and PP blanks are ideal for this situation.
The design configuration can be anything, here everyone can realize their fantasies.
Video: making a gazebo yourself
Plastic furniture
They have learned to use pipe-rolling materials in this area. How is polypropylene different? long term service, then the furniture made from it will be durable. For those.
By adding a little imagination and creativity, you can design interesting and stylish crafts furniture that will decorate any room.
Video: furniture
Shelves for the children's room
It cannot be carried away or overturned by strong winds. This dryer can be kept outdoors all the time, and it will not rust or rot. The convenient design makes it possible to move the dryer to the desired location at any time.
Video
Hangers for clothes
This is the simplest product, requiring only three small pieces of polypropylene pipe. Two of them should be the same length, and the third should be 1/3 longer.
These three pieces must be strung on a strong rope, which should then be tied tightly. This results in an isosceles triangle. A wire hook is attached to the top of the triangle.
Pipe-rolling materials made of polypropylene have proven themselves with the most best side. This was facilitated by the environmental friendliness and durability of this material. Therefore, crafts made from polypropylene pipes are in great demand.
Simple installation allows anyone, adding a little imagination, to create a necessary household item that will be used for a very long time.
Greetings, brain engineers! PVC pipes are the equivalent of Lego for adults, so having a small supply of such pipes at home is not bad at all brainidea!
In this brain leadership We with your own hands let's create from plastic pipes three things - a foam cutter, a hacksaw and a selfie stick. For this we need an industrial hair dryer and a pipe bending spring.
And also to create a cutter:
- PVC pipes and two plugs for it
- nichrome wire (I took 26 gauge)
- universal power supply (similar to the one I used)
- heat shrink tubing, wires and terminal washers.
For a hacksaw:
- PVC pipe
- hacksaw blade
- steel wire
- Grover washers.
And for the selfie stick:
- PVC pipes of two diameters (one pipe should fit fairly tightly into the other)
- steel wire
- PVC plug
- the correct size bolt for your camera.
If the presented video with the process of this brain guides does not play on your smartphone, then go via alternative link.
Step 1: Foam Cutter - Pipe Bending
Always wear a RESPIRATOR before heating plastic tubing!
We take a bending spring and place it in a PVC pipe. We heat the place of the future bend and carefully bend it. We repeat brain procedure until the pipe accepts the required form.
Step 2: Foam Cutter - Holes for Wires
We cut off the excess and drill holes for the power wires.
Step 3: Foam Cutter - Plug Holes
We drill holes in the PVC plugs for the eye bolts and insert them ourselves brain chatter, We attach terminals to the wires and secure them with eye bolts. And then we put plugs on the ends of the prepared pipe.
Step 4: Foam Cutter - Power Supply
Take a power source (I used universal block power supply) and solder wires to its output homemade products, the polarity does not matter, and to insulate the connection, and for a neat appearance, we use heat-shrinkable tubes. We glue the prepared power wires at the input to the tube with black hot glue.
Step 5: Foam Cutter - Finishing the Handle
For greater tube reliability brain pens glue them together.
Step 6: Foam Cutter - Nichrome String
We tighten between the eye bolts nichrome wire. Due to the fact that the tube brain games an elastic, taut wire will always be in a tense position - both in a heated and cold state.
Step 7: Foam Cutter - Setup
By adjusting the power supply, we adjust the desired level of filament of the string. And now this homemade You can cut through foam like butter.
Step 8: PVC Hacksaw - Shaping
We insert a spring into the tube and heat the bend. Next, we bend the PVC pipe until we obtain the desired shape in the form of the letter “C”.
Step 9: PVC Hacksaw - String for Coils
Down the pipe of the future brain hacksaws We insert a spring of smaller diameter, wrap the bending area with steel wire, the ends of which are fixed, this is how I attached them to the table.
Step 10: PVC Hacksaw - Coils
To prevent the ends of the hacksaw workpiece from diverging when the pipe is heated, we fasten them with electrical tape. Next, we heat the area wrapped with wire and create tension in the wire so that turns are formed. After the pipe cooled, I moved the wound wire and repeated the procedure.
We repeat the same steps from the other end brain dumps.
Step 11: PVC Hacksaw - Blade Cutouts
We trim the ends to the required length, and then make cutouts in them for subsequent installation of the hacksaw blade.
Step 12: PVC Hacksaw - Blade
We insert the hacksaw blade, and that’s it, the hacksaw is homemade ready.
Just like with a cutter, the blade will be taut.
Step 13: Selfie Stick - Coils
At one end of the blank tube for a selfie stick we form curls.
Step 14: Selfie Stick - Slots
At the other end of the workpiece we make 4 slits.
Step 15: Selfie Stick - Small Tube
In a tube of smaller diameter we drill a through hole brain foramen. Then we heat this end and “flatten” it.
Step 16: Selfie Stick - Fixing Screw
In a vice, we clamp the selected bolt and put a PVC ring on it, which we then heat with a hairdryer and squeeze from two opposite sides with two pliers, thereby creating a “T”-shaped screw fixing the camera.
Step 17: Selfie Stick - Screw Installation
Insert a screw into the hole in the “flattened” end; it will fix the camera to brain work. I also decided to bend this end so that the camera would be at a right angle.
Step 18: Selfie Stick - Tube Connection
We paint the “lamb” clamp in the color of the tubes and put it on the end of the large tube, then insert a smaller diameter tube into this end with the slots. This design allows you to adjust the length of the selfie crafts.
Step 19: Selfie Stick - Dummy
AND finishing touch- glue a white plug to the free end of the large tube of the selfie stick.
That's all, good luck in creating yours brain craft!
If you have a rich imagination, as well as a set of certain skills, then you can make from almost any object beautiful thing. Very often people make crafts from polypropylene pipes. The fact is that such material is produced in different diameters and is sold in almost any hardware store for quite a affordable prices. They can be used not only as a water supply and sewerage system, but also for making various crafts.
Advantages of plastic pipes
Those who do not have imagination will probably ask about what can be made from plastic pipes. And the answer will be quite extensive, because the material is suitable for assembling hundreds of different things.
It is worth noting right away that we are not talking about the direct purpose of a pipe product, but about the convenience that allows you to give a pipe various shapes. Plastic structures are quite light in weight, they are very strong and durable. They are easy to clean, and the pipes do not collect dust at all. Another positive thing is that these products are not afraid of water.
All crafts made from pipes are safe for absolutely all family members, including small children. They cannot be cut, they are light and do not emit any toxins harmful to the human body.
Usually for creative works PVC pipes are used, which can be easily connected using special adapter attachments. Thanks to this, it is possible to get quite unique and different designs. You can also use polypropylene pipes, but to make such crafts you need to purchase additionally welding machine, with which you need to connect the tubes. But the disadvantage is that after assembly, it will be quite difficult to disassemble them. In addition, the material will deteriorate after disassembly.
Connection of structures
Plastic is notable for the fact that not only various household appliances are made from it, but also furniture made from plastic pipes. For the structure to last long years, you need to learn about ways to correctly connect individual segments. The option for connecting polypropylene pipes was indicated above, and therefore only PVC pipes should be considered.
Connection methods:
- In a socket using rubber seals.
- Using glue.
- Using bolts and drilling holes.
The first method is the simplest, but it does not provide a strong enough connection. Before assembling the structure, it is necessary to completely clean the outer and inner surfaces of the pipes that will be connected. All dust must be removed and then treated with a special silicone grease. The pipe must be inserted into the socket until it stops, and then very carefully pulled back about 1 cm. If you use this connection method, the pipes can subsequently be separated if it becomes necessary to change one of the parts.
The second option provides a more reliable fixation, but you will have to spend more time. First you need to treat the joining surfaces using sandpaper to achieve good grip. Afterwards, you need to use methylene chloride to degrease the pipes.
The adhesive composition must be applied along the entire length of the required area. After processing, the pipe can be inserted into the socket until it stops, and then turned a quarter turn. To happen good process gluing, the parts should be pressed very firmly and wait one minute. It is worth noting that all operations with glue must be done very quickly, since it dries quickly.
The last method is the longest and most labor-intensive, since you will have to first make markings, and then prepare the surface before carrying out the assembly process.
If there is a need to combine a corner joint, as well as connect several sections into one unit at once, it is best to use different fittings. A pipe structure can be made of absolutely any complexity if you use fittings and tees.
Original little things for decoration
Any person can make absolutely any design, even if he has never done handicrafts before. The positive thing is that to make crafts you need to use a minimum of materials, and in some cases only the shortest pieces are used.
Using large-diameter scraps, it is very convenient to construct various organizers that can be placed in a garage or office. Pens, scissors, rulers or knives are placed inside.
There are several options:
- The workpiece can be attached to the wall using a self-tapping screw, for which one end of the segment must be cut at a certain angle.
- If all the parts of the homemade product are glued together, you will get a fairly stable figure that can be moved to any place.
You can leave the homemade product in its original color, or use additional coloring. Such an organizer can become an indispensable thing for schoolchildren or those people who often do needlework or various types creativity. With such a device you will always have at hand necessary tool, and there is perfect order on the table.
You can also convey comfort on your desk using a drawing tablet and a laptop stand. All this can also be easily made from PVC, which have a small diameter. You just need to remember what shape the school book stand had, and then use pipes and connecting parts to give the same shape to the product.
Every home has bookshelves, which force a large amount of printed material. Typically, such devices have fairly standard shapes. But if you use your imagination, you can create very original racks for books in hi-tech style.
There is always a mirror in the apartment. Using short sections of pipes, you will have the option to make a very beautiful pattern that will decorate any mirror or photograph. The available number of rings must be glued together in advance according to the prepared layout, which is applied to a cardboard sheet. You can create floral pattern or some abstract form. Frame sizes will be limited only by the amount of materials that can be used.
If you have a PVC pipe at home with a large diameter, then it is ideal for building a shelf in which you can put shoes. The shelf will have a large number of cells that are stacked on top of each other in any shape.
This design will not take up much space in the hallway, and you can store various pairs of shoes that you have in the house. The nice thing is that such a shelf can be built right up to the ceiling. For manufacturing it is necessary to use self-tapping screws or regular glue. To secure the structure to the wall, you can use a plywood sheet to which the parts will be glued. And the plywood itself can be easily attached to the wall using a few self-tapping screws.
You can also always build a simple hanger from polypropylene pipes with your own hands. To do this, you just need to connect three pieces of PVC.
Vases and pots
When there is a large number of indoor plants, then PVC pipes with a large diameter can be adapted for pots. On the one hand, you only need to seal one hole with plywood, and then drill holes in it for drainage system. Afterwards, soil will be poured into this structure and the plant will be planted. It will be interesting to look at the structure, which does not just stand on the floor in separate pots, but is connected and forms a certain abstract pattern.
From elongated cylinders that have a medium diameter, you can make a very beautiful vase in which beautiful artificial dried fruits or flowers are placed. If you approach the process creatively, you can give a beautiful gift to your loved one for any event. Such a vase will look very beautiful if you paste an old photograph on top.
Crafts for the garden
On summer cottage You can not only work, but also relax. But this will require creating the necessary conditions.
Homemade products for the garden:
Crafts for children
Quite often, grandparents bring their grandchildren with them to their summer cottage. But they are not interested in digging the ground, and therefore they will have to entertain the fidgets.
Equipment for children:
- If children come to the dacha in the summer, you can entertain them and make football goals from PVC pipes. It will be great option to spend time with the whole family playing football. Using tubes, the required shape is made, and then any piece of mesh that is available at the dacha is attached to it. If you don’t have it, you can purchase it at a hardware store. You will also need clamps that will hold the net on the gate. Plastic clamps are ideal for this.
- Very interesting device is a bow made from a plastic pipe. There are types of tubes that bend very easily. This can be used. The main part of the bow is made of flexible plastic. You need to bend it a little, preheat it, and then tighten the rope, which will serve as a bowstring. You can bend the pipe using construction hair dryer or using an open flame. As an arrow, you can use a regular shelf, or an increasingly tight pipe that has a smaller diameter.
Summarizing all of the above, we can conclude that PVC is quite universal remedy, which can be adapted not only for its intended purpose, but also to make very original things for the home or garden. The question of what can be made from polypropylene pipes will disappear after studying the options.
Hello, dear readers! If you take a close look at the objects around us, using your imagination, you can find at least several uses for each of them. It would seem, well, what can be made from PVC pipes, because they are used exclusively for the installation of sewers, in fact this material just a godsend for craftsmen. After all, the most simple pipes PVC can be quite easily and quickly transformed into incredible household items; below we have prepared a whole selection for you current ideas on this topic, and of course, each idea is supported by photographs for clarity.
What can be made from PVC pipes.
How to give one shape or another to PVC pipes.
In order for the pipe to be bent or flattened later, it must be heated gas burner, and immediately give the required shape. As a last resort, if there is no burner in the house, you can heat the tubes over the fire gas stove. You can cut pipes with a metal saw or jigsaw, and you can connect all the parts using cold welding(for this you need to purchase a special adhesive composition).
1. Car trunk.
This kind of car trunk can be built from water pipes. A bicycle holder for a car looks no less interesting.
2. Bed side.
To prevent your child from falling out of bed at night, you can make an improvised side.
3. Barrier for the doorway.
This kind of gate can be made on the doorway, so that the child will not be able to leave the room.
4. Vase and flower pots.
By cutting a cylinder of the required length from the pipe and pasting it with a self-adhesive, effective film, you can end up with a wonderful vase, inside of which you can place a glass of water and put fresh flowers.
5. New Year's decor.
Festive wreath.
We cut pipes of different diameters into small cylinders of equal length, glue them together to form a wreath, and paint suitable paint from a spray can, drill holes on top and thread a rope, hang the wreath on the wall, and put small New Year's balls into several cylinders.
Wall tree.
We take pipes of different diameters and cut them into cylinders of the same length. We prepare a canvas, glue cylinders onto it, forming the outline of a Christmas tree, create a footrest from a large pipe, hang the composition on the wall, and put various Christmas tree decorations in different cylinders.
6. Children's waterfall.
To harden a child, you can prepare such an impromptu waterfall by connecting two hoses with water turned on to the footrests of the product, and making holes for water to drain into top bar.
7. Children's house.
Children love to build various houses, huts and other shelters; you can make their task easier by preparing a frame from PVC pipes and sewing a cover from waterproof fabric.
8. Pool awning.
In addition to creating shade, such an awning can also serve as a goal for water polo.
9. Holder for glasses.
An excellent idea for a street bar, a slot is created in the pipe along the width of the stem of the glass, and holder legs are screwed on top, using which the structure is attached to the ceiling surface.
10. Place for bicycles.
Such a “stall” for children’s bicycles or scooters will help keep the yard in order.
11. Cells for wine bottles.
In large cylinders of pipes glued together you can store bottles of wine.
12. Drill stand.
The drill stand will help you create identical holes in strictly defined places on your products.
13. Ladders for cats.
Cats are very active creatures that value freedom, so in confined spaces they begin to waste away, to prevent this from happening, they need to be constantly occupied with something, and this one will help in this matter interesting design with slides, ladders and crossbars.
14. Vertical beds for strawberries.
Large holes should be drilled in a PVC pipe using a drill with a special round nozzle, then the pipe should be buried in the ground, and soil should be poured into it, and then planted in round holes strawberry seedlings.
15. Stand for kitchen appliances.
These pipes can make a wonderful stand for forks, knives and spoons.
16. Stand for scissors, pencils and tools.
Pinned to wooden plank pipe sections can serve as pencil holders. And vertically located cylinders can serve as a supply for tools. To prevent tools from falling down, the bottom of the pipes can be foamed polyurethane foam.
17. Laptop stand.
These pipes can make a wonderful laptop stand, especially since not very many parts are required, just a few pipes and connecting elements. Finally, the product can be spray painted in any color.
18. Cells for shoes.
Summer shoes can be stored in tube cells, and to make them look more presentable, they can be covered with a suitable adhesive film.
19. Organizer for scarves and underwear.
Stores sell special containers with compartments in which you can store linen or other accessories, but you can create such an organizer yourself by simply cutting PVC pipes into shallow cylinders and gluing them together.
20. Partition for climbing plants.
From such pipes you can create entire fences or partitions, along which you will subsequently weave climbing plants.
21. Stand and holder for a curling iron or hair dryer.
Thanks to such stands, the hairdryer, straightening iron and curling iron will always be in their places. And also, after use, you don’t have to wait for the curling iron or iron to cool down.
22. Enclosure for dogs and other domestic animals.
To prevent newborn puppies or kittens from wandering all over the place, you can build a small enclosure for them. Well, for more active animals you can create a large, full-fledged enclosure, not forgetting to cover it with netting.
23. Holder for watering hose.
To keep your garden hose from getting tangled under your feet, you can store it on this great stand.
24. Frame for a summer gazebo.
Continuing the topic of what can be made from PVC pipes, we want to show you an excellent seasonal idea for a gazebo. This design You can cover the top with an awning or hang light curtains on the sides, which will billow effectively every now and then even with a light breeze.
25. Frame for an outdoor cinema screen.
Fans of watching movies with friends will appreciate the idea of an outdoor screen; its frame can be made from PVC pipes, and the screen itself from the remains of matte stretch ceiling.
26. Skittles.
Children will be delighted with this mini bowling alley.
27. Puppet theater.
To create such a children's theater, you just need to assemble the frame and hang the curtains.
28. Sandbox stand.
It will be more comfortable for a child to play in a sandbox if it is raised above the ground, and sand will not get into the baby’s shoes or clothes.
29. Rack.
Such a rack will allow you to keep the room in order, as it can accommodate an unlimited number of things and toys.
30. Frames for pictures and mirrors.
Rings glued together, cut from PVC pipes, will ultimately serve as a wonderful frame for a picture or mirror.
31. Lamp.
Lamps made from water pipes look very beautiful, especially if the pipes are decorated with rhinestones or complemented with shaped slots. To implement the idea, a base with a light bulb is installed in a pipe with pre-created beautiful and elegant slots, and on the back side of the product a hole is created for the wire to exit. All that remains is to plug the lamp into a socket and enjoy the interesting muted glow.
32. Table.
You can assemble a wonderful table from PVC pipes by covering it wooden table top or build a bench (at the end of the article there will be a video on how to make a bench from such pipes).
33. Chairs.
Such pipes make excellent garden chairs; smooth lines can be achieved by heating the pipes with a gas burner, using your hands to shape them into the desired shape and leaving them to cool in this state. But even an ordinary geometric chair will look great; the seat can be created from ordinary chintz or cotton fabric. But you can go further and create folding chairs that will be very appropriate on vacation, for example, while fishing.
PVC pipes are an excellent material not only for plumbing and sewer system, but also for the manufacture of all kinds.
The material is highly durable, does not rot, is resistant to corrosion, is not afraid of water, frost, is non-toxic and completely safe for humans.
His smooth surface does not require additional sanding, the even color does not change over time. A little imagination and effort can turn leftovers into water pipe in, hanger, chair, swing, and even.
Products made from PVC pipes are made very simply and quickly; for some of them, nothing is required other than themselves. Having mastered the principles of working with the material, you can come up with your own original crafts, both necessary in everyday life and just trinkets.
An interesting idea and careful execution will make your creation beautiful, durable, convenient, in many ways superior to its store-bought counterpart and at the same time not requiring you to spend any money.
Shelves
You will need:
- PVC pipes of small and medium diameter,
- screws,
- plywood (fibreboard, chipboard, plexiglass, etc.).
Additionally useful: drill, bolts and nuts, couplings/fittings, soldering iron for pipes, acrylic paint.
Progress
- They are made from plastic pipes for shelves and screwed to the wall with self-tapping screws. They can be different shapes and sizes. The roughest option is to use pieces of pipes as choppers. Using fittings you can assemble rectangular frame. The soldering iron heats the material, it becomes flexible and takes on any round shape. Create your own unique design!
- Plywood or other material for the surface of the shelf is cut to the required size, processed and installed on the holders. The shelf is ready. If you need to fix the shelf, it is attached to the holders using bolts and nuts (drill a hole with a drill).
- You can paint the shelf any color with acrylic paint.
Hanger
You will need: PVC pipes of small and medium diameter, strong rope/string.
Additionally: hook.
Progress
- Prepare 3 pieces of plastic pipes. 2 of them should be the same length, the third is about one third longer, its length will be equal to the width of the hanger.
- Insert a rope inside the pipes and connect them into a triangle. The tail of the rope is located between identical segments. You can make a loop/tie out of it to make a hanger. Or attach a little stiff wire hook in this place more work, but a more convenient and beautiful product.
Child chair
Since PVC pipes are strong enough, this chair can withstand the weight of an adult. Lightweight, strong material with impeccable whiteness allows you to create an elegant design without much hassle.
You will need: plastic pipes of small and medium diameter, self-tapping screws,
seat (plywood).
Additionally: soldering iron for pipes, seat upholstery (soft filler + upholstery fabric), dye.
Progress:
- Assemble the frame of the future chair in your own way original project. For square corners, couplings are used, for round corners, bends, ironing. The frame under the seat, legs, and back are assembled. The legs and backrest are usually attached to the seat frame with tees. You can even make a chair with sides and smooth curves; you can get by with a simple square stool.
- The seat is being made. A piece of plywood is suitable for this. required sizes. You can make a removable/non-removable upholstery for the seat: soft filling (foam rubber, old blanket, etc.) is covered on top with fabric, preferably upholstery, since it is specially made for this purpose and will definitely last a long time (flock, jacquard, tapestry, etc.) . If you are planning a chair with a back, you can also provide upholstery for the back. Unlaminated plywood without upholstery requires painting/varnishing.
- The seat is screwed to the frame with self-tapping screws.
Flowerpots
You will need: small segments sewer pipes(large diameter),
fasteners.
Additionally: acrylic paint, pipes of various diameters, fittings, soldering iron for them, drill.
Progress
- A simple flowerpot. A short piece of pipe (3-10 cm) is screwed vertically to the wall. It turns out to be a ring into which you can immerse flower pot. Many pots have curved sides or a cone shape, allowing them to hang easily in these planters without falling over.
- Complex flowerpot. Using medium-diameter pipes, a fitting and a soldering iron, a rack for a flowerpot is assembled. To her in in the right places Large diameter pipe sections are screwed in with bolts, as described in point 1.
All products can be given any desired color using acrylic paint.
Greenhouse
Option 1
You will need: many small diameter plastic pipes, film/polymer
plastic, concrete solution.
Progress
- Produce necessary calculations. The fins of the greenhouse will be located at a distance of 0.7-1 m from each other. That is, for a greenhouse 6 m long you will need 6-8 pieces of pipe of the same length. The length of the segments is calculated taking into account the width and height of the greenhouse + about 20 cm from each edge is dug into the ground. It is permissible to divide this length in half and, using fittings, install traverses at the cut site.
- Dig small holes along the long side of the greenhouse being built. Immerse the ends of the prepared pipes in them. Fill in concrete mortar. You can just bury it, but it's unreliable.
- When the concrete hardens, dig similar holes along the opposite side and immerse the other end of the pipes there like an arch. Fill with concrete.
- Cover the frame with film.
Option 2
You will need: a lot of small diameter plastic pipes, film/polymer plastic, fittings, fittings, boards for the base.
Progress
- The base of the greenhouse is being built. Along its perimeter, a structure made of boards is knocked together like a sandbox.
- Reinforcing pegs are driven in along the long sides of the greenhouse at a distance of 0.7-1 m.
- The frame of the greenhouse is assembled from plastic pipes. Material is prepared for walls, doors, windows, etc. Pipes are put on pegs, opposite ones are connected to each other by a cross, beams are installed in the middle so that the resulting arcs do not move apart in different directions. Using fittings, install additional crossbars in different places: the structure will become stronger, and the space will be divided into windows, doors, vents, etc.
- Tighten finished frame film.