Interesting homemade products for the garage and home. Garage Ideas: DIY Tools for the DIYer

In today's story, we will introduce you to several tips and rational recommendations for arranging a garage parking space that will help cottage owners save money square meters and things.

Let's look at 10 easy DIY ideas for...

You can easily and quickly install some wire containers on the wall to store various things. Rational arrangement balls and hoses are another easy way to organize all the items and products that can easily create chaos and dust if not sorted into compartments and containers.

2. Signs and inscriptions

This could be stickers or completely painting doors and cabinets. unusual furniture coating for special markings. They will help family members navigate the garage space, and also store items and products in a certain place. The main advantage of this decoration method is the speed of implementation, which will only take a few hours!

3. The magic of magnets

For small tools and drill bits, you can use magnetic strips on the available wall space. You can hang small parts and devices on them that will always be at hand. This is a simple way to practically organize a room and storage systems, and is also extremely easy to implement.

4. Original hooks

Take long unused keys and turn them into hooks for wall decor and as an original authentic accessory. You can hang them on work clothes, ropes and everything that should be easily accessible.

5. Cans and other containers

You can organize and separate your nuts and bolts by adding some plastic toolbar containers. This will make it much easier for you to find required part or element. All products will be sorted and placed in certain containers, and for added convenience they can be attached to a wooden shelf.

6. Patch panel or board

Of course, you can always put in a perforated board where you can easily add some new hooks and organize your home decor in a new way. Plus, this organizational idea can act as a “makeover” for a garage wall! Tips and recommendations for using this multifunctional device can be found on the Internet portal Small Interiors.

7. Practical buckets

Some shelves and a large set of segments (stickers) can really come in handy. This is another one quick way forming a functional and rational area for placing things that will add characteristic style V Interior Design and help keep your work tools in order.

8. Bungee balls

Using bungee cords to store equipment for a variety of sports is a great concept for transforming a space. You can place both soccer and basketball balls in these stylized nets! They are commercially available and extremely easy to install.

With this creative, sustainable layout idea, you have absolutely no excuses for kids not wearing helmets during school and after school on bike rides and rides. After all, now you need to manage not to find them in a specially equipped place! Add wall decoration small hooks on which these safety devices will be located.

Instead of throwing water bottles and cardboard boxes in the corner of the garage, build a quick and easy recycling station for the whole family. It can be built using plastic boxes and boxes with inscriptions that allow you to sort waste into plastic and iron.

We have presented to your attention an interesting and extraordinary selection of conceptual ideas and creative solutions for organizing a garage space in an unusual house.

Did you like these rational and practical ideas? Share with us your opinion on this issue in the comments below...

Categories:
Places:

For a true car enthusiast, the garage is a second home. Or even the first one. Therefore, everyone tries to take its arrangement and equipment seriously. The functionality of each is also very important square centimeter area. This will allow you to work in a spacious room, and tools and spare parts will be stacked and arranged correctly and in perfect order. Regarding the arrangement in everyday life, we won’t talk today, but today we’ll try to save money on equipment.

What should be in the garage

In principle, there is no such device that cannot be bought. True, not everyone has the opportunity to spend tidy sums on purchasing Bosch equipment; by the way, it is useful to look through catalogs with Bosch or Intertool or Interskol equipment. The young but playful company Jonesway and the same company, repainted from green to brown, Ombra, have great experience and capabilities in this regard.

The catalogs contain a sea of ​​excellent working equipment, devices and universal pullers, mandrels for all occasions and, of course, tools that are difficult to look at without a stingy man’s tears. But the cost in catalogs is unreasonably high, as for a private owner. STO is certainly more favorable conditions, they earn money with equipment and God himself ordered them to have best tool. Otherwise, such a master is worthless.

Garage mechanic's wish list

Still, it’s worth making a rough list of what should be in the workshop, and then choose from it yourself. Here's what everyone would like to see:

1. A lathe, small, but with a minimal set of functions. Naturally, you won’t be able to make it completely yourself if you don’t have a strong and accurate frame. The price from a Chinese manufacturer will be no less than 23-28 thousand rubles. It is dangerous to buy domestic ones - many factories simply assemble equipment from Chinese components.
2. Drilling machine. A useful thing when you need to perform precise drilling or minimal milling work. You can make them, and they are inexpensive. A stand for a drill costs 3,000 rubles if you buy a ready-made one, and a fully functional drill costs 20-30 thousand.
3. A hydraulic press is an indispensable thing if you have to deal with shrinkage or pressing out of bushings, sleeves, and bearings. It is built on the basis of a hydraulic jack.
   
4. Emery. Necessary thing. Thread a tool, sharpen a drill, adjust a part to size, sharpen a spatula or knife, universal device, so it’s better to buy a high-quality sharpener, which can cost 3-4 thousand, depending on the options. And the options can be quite useful. For example, a flexible sleeve for turning a sharpener into a full-fledged drill for grinding or manual milling.
   
5. Racks, shelves, boxes for storing tools and accessories.

This should be an approximate set of additional equipment, not counting welding, two or three grinders and two or three drills and screwdrivers of different power.

Homemade devices

An elementary frame for an angle grinder can become a universal homemade machine. There are a lot of applications, it can be made from anything, even a durable wooden frame. it will become useful in cases where it is necessary to process small detail carefully and with both hands, without clamping the part in a vice. Of course this design has limitations, but as a small grinder or cutting machine, she will do an A+ job.

We do not indicate the sizes; the designs and sizes of grinders are different. The photos show the essence of the device, and it is not difficult to assemble. It’s worth working on attaching the grinder to the frame so that it can be quickly and securely fastened and quickly removed. This device is especially valuable for angle grinders with adjustable speed.

As a base we use a sheet of chipboard of suitable size, which is fastened with hinges, as in this design, or with latches, or you can use a screw fastening.

Drawing of a small lathe, which is presented, may be useful for those who occasionally have to deal with turning work, but there is no point in buying a tabletop one. This project, of course, will not satisfy those who need high accuracy and high spindle speeds, but it is suitable for minimal turning work. Instead of a spindle made from an M10 bolt shown in the drawing, use a ready-made spindle or a drill chuck.

Designed for processing wooden and plastic parts, the diameter of the part is up to 50 mm, and the length is up to 200, but can be revised if necessary. If we take it as a basis, then replacing wooden base for any rolled metal, we get something similar desktop machine for metal turning.

Various small items are often folded in plastic buckets and boxes in the form of a kind of assortment. Therefore, finding the right small tool, drill or nut is quite problematic. Jars for mustard, mayonnaise and other products with metal or plastic cover, which is firmly attached to the can.

To organize convenient access, you will have to sort through everything, separate the cutlets from the flies, the 10-point bolts from the 6-point nuts, and sort everything into jars. The covers are screwed to shelves or any horizontal surface, and now finding the necessary fasteners will not be difficult.

Magnetic containers can be used for horizontal storage of loose fasteners. Convenient thing. The fasteners will not fall apart, they are always visible, and containers can be arranged as space requires. The main thing is to fix the thin magnetic tape in in the right place, and glue large metal washers to the bottom of the containers themselves.

We showed more creative ideas that come to the minds of inventive craftsmen regarding organizing and storing tools and accessories in the photo. Use your imagination and reinvent the wheel. And your garage will be the ideal place for comfortable repairs of your favorite car.

It's nice to see when a person made everything and other household items with my own hands. To simplify the process of cutting metal or sawing elements from wood, they build homemade machines and accessories for the home workshop. This solution saves not only time on manufacturing products, but also money on purchasing ready-made ones. Let's look at a few practical and interesting options below.

DIY pipe bending machine

Read in the article

How to use homemade machines and tools for your home workshop

The use of homemade machines and devices for the home workshop is aimed at solving several problems:

• Simplifying the metal processing process. When creating household items, a metal cutter or press is often required.
• Improving wood processing. Even to build small shed or make it wooden, others are needed.

Buying a ready-made tool is quite expensive, so the use of homemade machines and devices for the garage is becoming more and more relevant every day. Among the most common options home tool highlight:

• carpentry workbench;
• device for quickly sharpening knives;
• device for sharpening metal drills;
• drilling machines;
• press;
• cutting disc machines.

Here are a few photos of do-it-yourself tools and devices from “homemade” people:

1 of 4

Practical DIY tool shelves

Before creating devices and with your own hands, determine the storage location of all devices, so that later you do not have to search throughout the workshop or where everything is. It’s not difficult to make a shelf for tools with your own hands; the main thing is to decide on its dimensions and material of manufacture.

The easiest way to make shelves is to assemble them from wood. Do not forget about the need to coat the finished structure protective varnish or to prevent wood from rotting and swelling.

You can create combined option made of metal support and wooden shelves. Here detailed instructions to create such a homemade model:

Image	Sequencing
	Assembling the frame. To do this, prepare two side frames consisting of 4 corners. Connect the elements using . Then, tighten the 2 frames together using 4 corners.
	When the frame is completely assembled, proceed to making the shelves. They can be made from wood or metal, as well as from other dense materials at hand. It is enough to cut the canvases of a suitable size and attach them to a metal base.
	If desired, you can make the rack movable by attaching four small wheels. Or install it firmly in a designated space in the garage.

You can find others interesting projects and drawings for making tool shelves. Watch the video on the topic:

And also make useful devices for yourself with your own hands. household:

1 of 4

We make a carpentry workbench with our own hands according to the drawings: video instructions and photo examples

Among the common do-it-yourself devices is a workbench. Durable and dimensional, allowing you to securely fasten the workpiece, useful for high-quality cutting of wood and creating from it various elements.

The device package includes:

1. Working surface. Hard is used for it to increase the service life of the device. The thickness must be at least 6 cm.
2. Supports. Collected from wooden beams or metal plates. The main task is to ensure the stability of the entire mechanism.
3. Vise for securing the product. If the table is long, you can install two vices at once.
4. Tool box. A useful recess or pull-out design that provides quick access to needed small parts.

To assemble a carpentry workbench for your workshop yourself, you should choose a drawing and purchase materials for the work.

DIY carpentry workbench drawings

Before purchasing materials to assemble your own workbench, you should think about a detailed drawing. It should include the dimensions of the machine itself; it is advisable to note the dimensions of the materials used and their quantity.

For example, finished drawing A DIY folding workbench may look like this:

Whatever model you choose to create, take into account several features of the workbench that ensure ease of cutting wood:

• height and length of the master’s arms: the height and width of the tabletop depend on these parameters;
• which hand is working: place the vice on the right or left;
• what blanks will be made: choosing the shape of the table;
• how much space in the room do you allocate for the workbench?

Taking into account all these parameters, it will be easier for you to decide on the drawings of the carpentry workbench and the dimensions of the machine. Here are a few interesting examples:

Instructions for assembling a wooden workbench with your own hands

You can buy a wooden workbench in a store or through online catalogs, but it’s cheaper to make it yourself. Let's take as a basis a simple option with typical tabletop dimensions: length - 150-200 cm, width 70-120 cm.

The manufacturing work will include several stages:

Image	What need to do
	Make the top cover from thick ones to make a shield with a width of 70 to 200 cm. Fasten the elements with long nails, and you need to drive them in from the outside and carefully bend them from the inside. The working surface of the workbench is made only of wood or.
	Sheathe the lid along the lower perimeter with a 5 by 5 cm beam. This will make it more convenient to attach the vertical supports. The location of the supports depends on the size of the tabletop. It is better to make them from thick rectangular timber at least 120 by 120 mm.
	The carpentry workbench must be installed correctly. Be sure to secure it firmly. If it will be mounted outdoors under a canopy, dig holes for supports. Indoors, use other fastening methods.

When the structure is assembled, install a vice on it. To fully understand how to assemble a carpentry workbench with your own hands, watch the video:

Making a carpenter's vice for a workbench with your own hands

Professional “homemade workers” assemble not only tables for work, but also vices with their own hands according to drawings. Any design of such a clamp will include several elements:

1. Supports, where each one has a sponge for clamping.
2. Moving jaw.
3. Metal guides. The sponge moves over them.
4. Lead screw for moving elements.
5. Collar. Necessary for rotating the screw.

When making a homemade vice with your own hands, you can use various available materials. For example, there is a design option made from a profile pipe. To do this, prepare several pieces of pipe of different sizes, a steel stud with large threads and double nuts.

Instructions for creating a bench vise from a profile pipe:

Image	What need to do
	The largest pipe acts as a body. Supports are soldered to it from below. A 3-4 mm steel flange is put on the back side. A hole is drilled in the center for the running nut, and opposite the front support is the rear jaw.
	There is a front steel flange on the internal moving part. A stud is mounted in it, with lock nuts attached to it. Thrust washers are placed on both sides of the flange. The last element is a movable tube attached to the front jaw.

And also watch the video “do-it-yourself vice at home”:

DIY metal workbench drawings

Metal workbench big differences from the carpenter does not. The base is hard metal, not wooden frame. A vice is attached to it, and the entire workbench is designed to withstand the force of a sledgehammer.

Do-it-yourself metal workbenches can have one, two or three cabinets, and also not have shelves or drawers for small parts. In terms of strength for working in a garage, you can make regular table made of metal up to 5 mm thick and reinforced construction, where sheets from 10 to 30 mm are applicable.

Here are some useful plans for making a metal workbench for your workshop:

How to make a device for sharpening knives with your own hands: drawings and photo examples

No home is complete without a knife in the kitchen. Correct without special devices it’s quite difficult to do: you need to maintain the desired angle and achieve perfect sharpness blades.

For each knife, a certain sharpening angle must be observed:

1. A razor and scalpel require an angle of 10-15⁰.
2. Cutting knife bakery products– 15-20⁰.
3. Classic multifunctional knives – 25-30⁰.
4. For hunting and hiking, take a device with a blade angle from 25 to 30⁰.
5. If you want to cut hard materials, then sharpen at an angle of 30-40⁰.

To ensure the desired angle, it is worth buying or making a sharpening device. For example, you can assemble a sharpener with your own hands.

A comment

Tool selection specialist at VseInstruments.ru

Ask a Question

“If you don’t use sharpening every day, then 1000 rpm is enough for a high-quality result and long term operation of the device.

"

To assemble such a machine, you will need a motor from a washing machine with a power of 200 W. Completely for creating a sharpener from an engine from the Progress of work on creating such simple device will be as follows:

• Sand the wood blocks sandpaper, removing burrs. Make markings depending on the desired angle.

• Attach a stone to the drawn line to give the blade a sharp edge. To do this, attach it to the block and mark its width. Then, make cuts on the markings, up to 1.5 cm deep.
• Attach abrasive stones to the resulting recesses so that the grooves coincide. Then, install the sharpening stone by screwing it onto the bolts.

There are many ways to make a homemade knife sharpener. Choose the one that suits you and try to create a convenient and useful tool for home.

How to make a device for sharpening a metal drill with your own hands

They make their own not only a sharpener for blades, but also a machine for drill sharpening on metal. Here are a few drawings useful for work:

Ready-made home machine The simplest and most common version of such equipment for the garage is a converted drill. To work you will need:

• base frame;
• rotation mechanism;
• vertical stand.

For the rack, they usually use either boards. The drill is lightweight, so there is no need to use metal. In this case, the frame must be made massive in order to reduce vibrations during operation of the device.

To correctly connect the bed and vertical stand, as well as assemble all the equipment into one whole machine, pay attention to the video instructions:

DIY drawings with dimensions for a drilling machine

To correctly make any machine or practical device for private use, you should first make a drawing with dimensions. Only then begin preparing materials and assembling the device.

Here are some examples of do-it-yourself drilling machine drawings from a drill:

You can also do homemade vice For drilling machine. Below is a video instruction for assembling such a device:

Article

A variety of accessories for a private garage, designed and manufactured in-house, allow for better and more efficient vehicle maintenance. Their creation requires minimal financial costs. Wherein homemade equipment in most cases, its capabilities are in no way inferior to expensive factory analogues.

Stand for electric drill - simplify the drilling process

In a private garage, over time, more and more different tools and equipment used to service the vehicle appear. The owner should ensure their convenient and rational storage in such a way that the most necessary equipment were always at hand, and rarely used ones were hidden away. To solve this problem, you need to draw a basic sketch and create shelves or. Ready-made options There are many such designs on the Internet. And it’s not at all difficult to come up with a shelving system yourself.

More problems arise when you need some rare homemade items for the garage. For example, many car owners use an electric drill when servicing their car and performing various chores around the house. Often, with its help, it is necessary to make perfectly even holes with axes strictly perpendicular to the plane of the workpiece. Anyone who has tried to achieve such a result knows that it is not at all easy. As a rule, the holes are skewed. A drill stand can solve this problem. To build it with your own hands, you need to stock up on:

• rod or calibrated tube;
• a platform from a milling cutter (manual), which has not been used for its intended purpose for a long time due to its wear and tear;
• sheets of plywood.

It is also permitted to use another suitable platform as a base for the stand. The main thing is that it is level and has areas where you can install new long guides. The function of the latter in our case will be performed, as you already understood, by metal rods or calibrated tubes. The process of building a rack is truly simple. Let's describe it.

First we cut a box from a sheet of plywood. It must be done precisely according to the geometric parameters of the available drill. Then it is necessary to secure our power tool as securely as possible for drilling holes in the box prepared for it. Fixation is best done using special wing nuts. After this, we make two holes in the box and pass tubes (rods) - guides - through them. We mount a handle on top of them. With its help, we will move the drill to drill holes vertically.

Advice. If you want to control the drilling depth, it is advisable to additionally equip the design with a quick-release clamp. It will act as a movement limiter for the drill. All the described work will not cause any problems for a more or less experienced home handyman. the slightest problem. And in the end we will get easy-to-use and very useful homemade equipment.

Mini knife sharpening machine - reliable and compact

Now let's try to make a device that will allow you to sharpen kitchen and any other knives. We proceed like this:

1. 1. Take an unnecessary sheet of metal (in any garage it is sure to be lying somewhere in the corner and waiting in the wings).
2. 2. We fix a threaded bolt in its lower part, and weld a small corner on top of the metal plate.
3. 3. Place a nut on the bolt thread. It serves as a hinge for the lateral movement of our device. With its help you can change the sharpening angle of knives.
4. 4. We weld another one to the described nut. We got a ready-made hole for the rod in the bolt. It is easy to make from thin wire.

The clamp in the machine will be the top part of the sheet. We make two holes in it. We apply a clamp to the frame. Then we cut another hole. It must be end-to-end (common to the plate and clamp). Next, we make carvings in the bed, taking into account the length of the bars for turning. They are optimally made from artificial diamonds. There is no more wear-resistant and at the same time inexpensive product in nature. And we’ll make clamps for the beams in a couple of minutes from a piece of ebonite or plexiglass.

All that remains is to drill additional hole on the plate, placing it away from the knife, and cut a thread for the bolt with which the tightening will be performed. Compact and quality tool ready for sharpening! We put it on a shelf in the garage and use it as needed. Machines made according to the described scheme can be taken with you even on a hike. These garage sharpeners weigh little and take up minimal space.

Crane beam for the garage - let's make vehicle repairs easier!

Maintenance and simple car repairs in home garage are significantly simplified if there is a crane in the room. Look at the photo below. It shows how convenient and useful a garage structure can be constructed without much effort.

We will make the transverse rod from a pipe with a cross-section of 10 cm, the supports for it from pipes 11 cm. Important! Racks homemade design It is recommended to make it from square profile pipes with dimensions of 10x10 cm. They will provide the device with good stability. We attach the rod to the supports with M16 bolts (you can use other fasteners), fix the bevels and the base using a 10x10 cm corner.

We buy a lifting cable at the nearest construction store. We take the rollers for it from the elevator door drive mechanism. Notice! The rollers need to be well secured. This operation is best performed using a narrow (5 cm) metal strip. The lifting of objects on the crane beam will be ensured by a worm gear hand winch. And don't forget to attach another set of rollers to the vertical posts. They will allow you to move the crane beam throughout the garage without any problems.

DIY compressor - homemade for advanced drivers

Workbenches, hanging shelves and others useful crafts Any car enthusiast can build it for storing equipment. It is more difficult to make machines and special equipment yourself. But when the right approach to really cope with such tasks. Let's assemble a compressor that can be used for blowing vehicle components and mechanisms, painting a car, and monitoring tire pressure.

We will need a 10-liter air receiver (a device with a slightly larger or smaller volume is suitable), a refrigeration unit (old, not used for a long time), and also:

• adapters;
• inexpensive filter regulator (feel free to purchase the cheapest one);
• oxygen pressure gauge for the receiver;
• fastening clamps;
• hose (approximately 200 cm) designed for 20 bar pressure.

The compressor assembly process is simple. The receiver has outputs at the bottom, middle and top. The bottom one is necessary for draining oil and condensate, the middle one is for installing a pressure gauge. The flow is supplied to the consumer through the upper compressed air. We connect all the required elements to the outputs of the device and secure them with clamps. We connect the filter regulator to the receiver panel. Next to it there will be a button to start the unit. Maximum pressure regulator on homemade device should not exceed eight atmospheres, the minimum is two.

It is advisable to additionally equip the compressor with an emergency valve. This inexpensive item will be fully guaranteed safe operation homemade device.

We will place the completed compressor near the wall on a rack or shelf. It will not interfere when moving around the garage, while at the same time being always at hand for the home craftsman. Advice. Old compressor Before use, it must be thoroughly cleaned of rust. And then buy an aerosol can of paint and paint the unit.

Pulley for adjusting the speed of homemade machines and other crafts

We will briefly describe other popular tricks that are easily made from used tools and unnecessary things. Let's make, for example, a pulley for any machine in the garage. The material for its assembly can be textolite, metal, or plywood sheets. The last option is the simplest:

1. 1. We cut out two larger and one smaller circles in a plywood blank. The diameter of the holes made must correspond to the cross-section of the shaft installed on the machine.
2. 2. Place all the circles on the screw, use a nut to tighten them firmly. Instead of this fastener, it is allowed to use good glue. It will securely fix all the elements into a single structure.
3. 3. Additionally, we tighten the details of the craft with screws.
4. 4. Process with a file or sandpaper homemade pulley, apply a couple of layers of drying oil on it.
5. 5. After drying, place the made device on the chuck of any mini-machine (for example, an electric drill). And we use the tool for our own pleasure, because now we can choose its rotation speed and control the load on the electric motor of the unit.

If necessary, it is possible to make a toothed pulley. To do this, it is enough to cut narrow grooves (tubules) in a small circle. This part of the operation must be completed before assembling the pulley.

if you have electric jigsaw, which is not used because the file holder is broken, does not need to be sent to a landfill. There are little tricks to give your instrument a second life. On its platform it is possible to assemble a simple table jigsaw. We take a square of metal and solder a bolt into it. We get a new file holder! Solder it to the old holder.

Then we make a stationary desktop. We take a plywood sheet and cut it to the size of the jigsaw. We attach a stand made of wood (we use hard grades) to the back plane of the working surface, and install it on the front furniture legs. Next, we mount the working structure on a suitable base plate. Use a refurbished and improved jigsaw to your health.

Absolutely anyone can make accessories for their garage with their own hands. With the help of such products, the owner of the premises will free up a lot of space, and tools and equipment will always be at hand.

A workbench is a necessary product in every garage

A homemade workbench should be in every garage. It does not take up much space and makes it possible to comfortably carry out repairs and make useful crafts. Usually the workbench is made of durable wooden planks, which are attached to the thick wooden beam or profiled pipe. Often workplace made from steel billets. They are quite easy to cut and fasten into one robust construction with help metal corners and universal self-tapping screws.

To make a workbench, as well as other machines for the garage, you need to draw an accurate design plan. At the same time, take into account the space that will be allocated for the product. It is best to place the structure next to shelves or racks. In the drawing, indicate the presence drawers and shelves. You will store small fasteners and tools in them. You can also attach a compact vise to the tabletop. Having drawn up a plan, start making the workbench. First, we assemble the tabletop.

If you have small room, then there is no point in making a large homemade product for it. You can connect the boards together using good glue and metal ties. As a rule, the tabletop of a standard workbench consists of 5–10 identical boards. Next, we make special grooves measuring 2.5x2.5 cm on the tabletop. They are needed for stops. As soon as the glue on the product has dried, the surface must be planed. The result should be a perfectly smooth coating. The legs for the structure can be made from several bars measuring 80x10x10 cm.

We make grooves in the front legs into which the brackets will be inserted. In the future, the latter will be connected to the longitudinal beam of the tabletop. Then we assemble the base of the underframe. It consists of two frames, which are made from 5x10 cm boards. The base is attached to the support, after which the frames are cut into the legs of the workbench by 2.5 cm. At the end, we secure the components with bolts. Then you need to attach the back and side to the workbench supporting walls. For their manufacture, sheets of chipboard or centimeter plywood are taken.

The last step will be connecting the tabletop and the upper frame. To do this, you should use powerful bolts. Afterwards we apply drying oil to the surface of the workbench. As soon as it dries, we treat the surface with varnish. As a result of the work, you received a stable structure on which you can not only repair spare parts or make various crafts, but also to store the tool.

Making a rack - about a complex design in simple words

Every driver probably has a lot of large garage equipment that there is no place to store. Where can you find such a place for them so that later you can quickly find the right tool? The correct answer is on the rack. This design will allow you to organize free space and save a lot of time. Similar devices for the garage can be made of wood or metal. The second option is more reliable, but it is quite difficult to implement it yourself.

The first one is much easier to complete, however, in order for the structure to last for a long time, it is worth choosing strong wood species for the work. Beech or oak are perfect for this. Boxes and shelves made from them can withstand significant loads. In principle, the norm for a rack is the ability to withstand a weight of 150–180 kg. In practice, only a few adhere to these recommendations. However, it is definitely worth remembering that the maximum weight of all tools on the rack should not exceed 300 kg. Otherwise, this design will become dangerous for the garage owner himself.

Making a rack with a complex design is very difficult. It requires significant effort, a lot of time and equipment. It is not much inferior to a simplified product, the manufacturing algorithm of which we will consider in more detail. So, the operating procedure is as follows:

1. 1. First you need to take a board 9 cm wide and cut it into pieces of different sizes. In the future, these parts will play the role of supports for the structure.
2. 2. For shelves you will need to take a thicker board. It must be cut into several identical parts.
3. 3. Next, take a board for the base of the rack and mark on it the points at which we will make spacers. They should be located at a distance of 3 cm from the edges of the base.
4. 4. Attach the upper spacer using superglue. We nail the top shelf to it. The same manipulations must be repeated with other spacers and shelves. The bottom expansion part should be attached last.
5. 5. Then you need to turn the assembled product over, tighten the base of the rack with spacers, using screws for this.

After the work done, your rack is almost ready. In the end, all you have to do is clean the surface of the rack with sandpaper and treat it oil varnish. It is best to apply the latter in 2 layers. Attach the structure to the wall with powerful anchor bolts, screwing in the fasteners under the upper and lower flanges of the structure.

Cyclonic vacuum cleaner and press - useful homemade products for those who like to tinker

The list of homemade machines and devices must include a press. This clamping device will become an indispensable assistant to every lover of home creativity. To make a press you will need hydraulic jack, metal platform bed and 4 profile pipes. Two of them should have a cross-section of 4x4 cm, and the rest - 6x6 cm. To make a press, we take two pipes with a smaller cross-section and attach them to the base of the product. At the very top, between these pipes, we weld another pipe with a larger cross-section.

Install the remaining pipe so that it can easily move along the previously installed guides. The device made in this way works on a very simple principle. To connect two products, they need to be placed on the base of the press and covered with a thick plywood sheet. The pipe with the jack installed must be lowered, and then the two short pipes must be turned. By making this simple movement, you will securely connect the two previously supplied products.

Second device - cyclone vacuum cleaner, it will help you always keep your garage perfectly clean. To make it, prepare a plastic or metal container. Important nuance– the lid of the vessel must be tightly closed. Next, we make 2 small holes in the lid. The first should be located in the center, and the second close to the edge. The hole diameters and cross-sections of the hoses you use must be the same. We connect the pipes to the holes. The first will serve to collect garbage, and with the help of the second you will connect a regular vacuum cleaner

Install a plastic elbow into the inlet pipe. With its help, air will be sucked into the device, like a cyclone. Thanks to the presence of this elbow, the vacuum cleaner will be able to suck in not only dust, but also small stones, sawdust, lumps of dirt and other small debris. All this will remain in the container to which you connected the hoses. If you wish, you can not equip the vacuum cleaner with a knee. But in this case, you will not be able to remove garbage, only dust. In such a device it is most advisable to use plastic container and narrow hoses. If you need a more powerful device, then you should make a vacuum cleaner from large hoses, an elbow and a steel container.

Device for making ropes - ropes from plastic bottles

When heated, plastic bottles shrink quickly. Thanks to this, we are able to make fairly strong ropes from them. With their help, the garage owner will be able to connect several various products which are used on the farm. To create the device you need to find two bolts with nuts and washers, a piece of thin board, an electric drill and stationery knife. After that, take two washers and place them in the middle of the board. The centers of the washers should be marked on the board with a marker. We drill holes at the resulting points.

Next we drill holes with reverse side boards. This must be done to prevent rotation during operation of the device. The next step is to screw in the bolts. We are testing the device. We put several washers on the protruding ends of the bolts. The final thickness of the rope will depend on the number of bolts. Next, place a stationery knife or a small piece of it on top of the washers. We secure the device with additional washers screwed in until it stops. Next, the device must be fixed on the desktop using clamps.

Then we take a two-liter plastic bottle, cut off its bottom and cut a strip in the remaining part. We place the latter on the device so that it is located under the knife. Next, we take the strip with one hand and pull it, while holding the plastic container with the other hand. As a result, from one unnecessary 2-liter bottle you will get about 20 linear meters ropes.

How to make a viewing hole - detailed instructions for beginners

Whatever one may say, sooner or later the car has to be repaired. And so that the car owner does not have to crawl under the car and “squirm”, bending double, it is necessary to dig a hole in the garage floor for inspection and repair. First of all, those who want to do this need to mark the area of ​​the room where the car is parked. To do this, the area of ​​the garage is marked with chalk. When creating markup there are several things to consider: important factors. The length of the pit must correspond to the length of the car, and another 1 meter must be added to this value. The width should be such that it is comfortable for you to work. However, be careful - this value should not be greater than the distance between the wheels of the car.

The depth of the hole is calculated taking into account the height of the garage owner. Another 20 cm is added to this indicator.

“Having taken measurements”, start digging a hole. Once you've done this, think about the arrangement inside. First of all, this concerns the walls of the pit. For this purpose, bricks can be laid on the sides, building blocks or concrete. The thickness of the walls directly depends on the material. So, if you use ceramic brick, then this figure should be equal to 20 cm. If you purchased cement, then the thickness of the walls should be 12 cm. If you want to make walls from blocks, then their thickness should not exceed 22 cm.

Do not forget that the walls of the pit will require hydrophobic impregnation. It will protect materials from moisture. Impregnation must be applied with inside bricks or blocks. To make entry and exit more comfortable, we make steps in the front part of the pit. It is best to use cement for this. You need to start from the lowest step, gradually rising higher. Each of the staircase elements must be the same. To achieve this, first measure the height of the rise and calculate the number of steps.

Shelves in the room - for storing loose fasteners and more

Sometimes the garage space does not allow you to make and install a large, spacious shelving unit. In this case, you can make shelves different sizes. They will be attached directly to the walls at any height convenient for you. This will make it possible to save space on the floor of the room. First of all, you will need to determine where the shelves will be fixed. On the selected section of the wall we make approximate markings, dividing the area into equal squares. Dowels will be screwed into the corners of these squares to hold the shelves.

To screw in the fasteners, drill holes for them using a hammer drill. If possible, it is worth purchasing special dowels with hooks at the ends - they will provide better fixation of the products. Next, we take a thin board and attach hangers with eyes to it. When calculating the distance, be guided by the markings you made on the wall surface. To secure metal hangers, use reliable self-tapping screws. After that, all that remains is to make the shelves. We take several boards and cut them into equal parts - they will serve as bottoms for the products. Then we cut out the walls of the shelves from thicker boards. We nail or glue them to the bottoms. If desired, the products can be painted or varnished.

The final stage will be the installation of finished shelves in the designated places. When installing each of them, carefully ensure that the products stand level and move freely along the guides. If you want, you can glue machined pieces to the front walls of the drawers. wooden handles. It will be more convenient to use the shelves with them. A very interesting idea would be to make shelves from plastic canisters.

If you have a sufficient number of these containers, and in the future you do not plan to use them for their intended purpose, then you can use them according to this principle. First, we cut holes in the outer walls of the canisters. At the same time, make sure that only the right or only the left wall of each container is cut off. Otherwise, the shelves will look inorganic. After cutting out the outer walls, clean the plastic from burrs. To do this, use a file. After this, all that remains is to install the shelves in place in the wall or use them as drawers in the shelving unit.

Return