Many housewives are confused when they look at the hood grate, covered with a layer of fat, scale, and residual combustion products. How to clean the hood? At such moments, their heart is filled with longing, and their consciousness refuses to admit that they will have to spend from an hour to two in the fight against these pollutions. Accepting the fact that it is necessary to bring household appliance to its original state, the question arises - how to clean the hood in the kitchen from fat quickly and at the same time effectively?
According to survey data conducted by independent experts on the territory of Russia in 2017, 80% of the respondents said that at home, cleaning is limited only to the external processing of the device and they do not know how to clean the hood. Needless to say, with this approach to the issue, the performance and functionality of the kitchen appliance suffers first of all. They are reduced to a minimum.
A complete and thorough cleaning involves careful processing of both the body and the grille, as well as the nodes with the elements located inside. The task of paramount importance is to remove plaque from the filter, since it is this that determines the correct operation of the device.
Preliminary preparation of the device for cleaning
At the first stage, you should carefully examine the device located above hob and read the instruction manual. As part of the second stage, a simple sequence of actions is performed:
- the device is disconnected from the mains;
- the device is disassembled to the maximum;
- the mesh, under which the internal components are located, is fixed with bolts on the frame;
- parts are unscrewed, and the latch is removed;
- it makes sense to disconnect the filter from the outlet pipe.
The operating instructions for the kitchen hood indicate how to clean the grate and the constituent elements of the apparatus, what means are best used for this. All manipulations must be carried out in strict sequence, in accordance with the instructions. Otherwise, you can hopelessly spoil the item. Separate and smallest elements are best placed in a container. They also need to be processed.
Effective fat removal products at home
Frequency of removing soot from the surface of the grate, filter and internal elements kitchen appliance depends on the intensity of its work. Ideally, once a quarter. In this case, you can wash the fat from the hood with a regular dishwashing detergent.
Consistency recipe:
- one part of the detergent composition is diluted in four parts of warm water;
- elements and details exhaust device soak in the composition for 30-40 minutes;
- after the specified time, the parts are removed from the liquid and doused with boiling water;
- parts are poured with boiling water, gently wiped with a cloth or soft sponge.
If it was not possible to clean the hood from fat, and the viscous scale firmly stuck to the base of the grate, we recommend using more aggressive means, which will be discussed below.
Highly specialized chemicals
This approach involves the use of both aggressive formulations and fairly soft products. In advanced cases, only very active substances will help clean the kitchen hood. One of the time-tested options is a concentrate used to flush kitchen pipes. Experts recommend following a few rules:
- with the help of a concentrated cleaning agent, the parts are processed for no more than 2-3 minutes, otherwise the material may be damaged;
- the elements of the device should be placed in a separate basin, and then filled with a composition prepared in accordance with the recommendations;
- grease residues dissolve in a few seconds, separating from the surfaces of the parts.
The treated parts of the apparatus are taken out and washed under running water, and then thoroughly wiped with a cloth until completely dry.
Application of laundry soap
With the help of laundry soap, you can get rid of even the most persistent pollution on the hood, inside it. Experts advise using standard soap with 72% fatty acids, Brown. In 2-3 liters of water, 0.5 pieces are diluted. For quick dissolution, the product bar is rubbed, and the water is heated to a boil.
- Metal parts that are not afraid heat, boil in the composition.
- The remaining parts of the device are washed with a soapy consistency with machining(dense sponge, scraper, plastic brush).
This folk remedy can effectively clean the kitchen hood from grease in just a few minutes. If the scale does not lag behind the surface, it makes sense to soak the part in the consistency for 20-40 minutes, after increasing its concentration.
Using baking soda to clean your cooker hood
Among the available products that clean surfaces from viscous mucus and combustion products, baking soda has proven itself well. If you do not know how to clean the hood mesh, we recommend using a solution prepared according to this recipe:
- 120-150 mg of powder is diluted in a 10 l saucepan of water;
- over low heat, bring the consistency to a boil;
- small parts and mesh are lowered into the composition for 30-40 minutes.
The grease trap can be immersed completely in the pan or only half if its size is small.
Concentrated brine
Household salt in the form of a concentrated solution perfectly removes greasy scale on the grate of the hood. It is first necessary to prepare a hot composition based on table salt. After that, the dirty elements and parts are soaked in the consistency for 30 minutes. The composition can be heated over low heat, but not brought to a boil.
If the contamination is not washed from the surface by the element, it is better to treat them with citric acid or juice.
Experts advise removing small particles and soot from the surface of the hood filter mechanically (sharp knife will come in handy). It is necessary to act very carefully, eliminating the contact of the abrasive element and the surface of the parts.
Upon reaching the desired result, the internal parts are washed in ordinary, and then running water. If the composition washes off residual products, then it remains only to dry the nodes and elements. But how to clean the hood from fat if there are small problem areas? It is better to treat such areas with the consistency of laundry soap or lemon juice.
Experts emphasize that the issue of cleaning the hood from fat at home is not limited to the "insides" of the device. The housing of the kitchen appliance must also be maintained in good condition. A large number of Settling grease and dust dry up after a short time, forming a "crust", on the surface of which new residual products accumulate.
How to wash fat from the body? The means used are similar to those described above. The main differences relate to the regularity of the procedure. The unit hood should be cleaned weekly. Above, we looked at how to wash the kitchen hood filter from grease. For the case, the sequence of actions is preserved:
- Apply a small layer to the contaminated surface detergent(for dishes it is quite suitable).
- The consistency should dissolve the fatty crust, so it is left to “absorb” for 20-30 minutes.
- The cap is cleaned with a sponge.
- Small areas of dirt are removed with a plastic scraper.
It is unacceptable to use metal brushes or sponges with small inclusions of metal, as they scratch the surface of the device.
Experts advise to general cleaning so that the kitchen unit is cleaned at least once every 1-2 months. Most modern hoods are equipped with removable disposable filters. As they become dirty, they are simply replaced with new ones. Older models do not have this feature.
We strongly recommend watching a thematic video, which tells in detail how to clean the hood from grease, grate, internal components and small parts of the device. A dishwasher can become a faithful assistant in this difficult task and will save not only time, but also your own strength.
How to clean the hood: conclusion
Cleaning activities - milestone and an important part of the successful functioning of kitchen appliances. For a kitchen hood, the primary task is to prevent serious contamination both inside and on the device body. Fat and fumes should be washed off in a timely manner. So, you became aware - how to clean the hood?
The hood is an essential element kitchen interior and indispensable assistant cook. Professional cooks and housewives who spend a lot of time in the kitchen are well aware of how to clean the hood from grease at home. It is not surprising, because when cooking, it receives no less impact than a stove.
Some chefs neglect the preventive cleaning of this kitchen element, but this is wrong. The hood brings out unpleasant odors, smoke and burning, which are the eternal companions of culinary practice.
If the filter is clogged with a thick layer of sticky grease, the system becomes useless. Yes, and getting rid of frozen fat is much more difficult, so it is not recommended to postpone cleaning the hood for later, but to carry out the procedure at least once a month.
Thanks to the efforts of people working in the chemical industry, we have an extensive range of detergents and cleaners that can easily cope with any contamination. You go, you buy, you use - everything is simple.
But it was not always so. Former choice household chemicals was limited. To tidy up the stove, oven or hood, the housewives used improvised means. For many years of practice, a list of folk remedies has been formed that are not inferior to household chemicals. Let's talk about popular ways to deal with pollution in the hood, consider the substances and home remedies that are best at removing stains, dust and grease stains. However, let's talk about safety first.
Precautions and Safety
Any job requires right approach. Even the preparation of vegetables for further heat treatment potentially dangerous, because an infection can get into the wound left by a dirty knife. What to say about cleaning an electrical appliance using aggressive substances. To avoid trouble, I advise you to listen to the recommendations.
- Before the procedure, be sure to unplug the hood from the mains to avoid electric shock.
- Please read the instruction manual carefully before disassembling the device.
- Many products contain concentrated acids or alkalis. Use latex gloves to protect hands from chemical burns. Exercise extreme caution when using chemistry oriented to cleaning sewers.
- Clean the cooker hood while wearing long sleeves and glasses. This will prevent hitting skin covering and into the eyes of aggressive substances.
- Perform work in a well-ventilated area, isolated from adjacent rooms. Be sure to restrict the access of animals and children to the kitchen at the time of the operation.
Preparatory stage
Cleaning the kitchen hood is preceded by preparatory stage, which involves disconnecting the device from the network, studying the instructions and disassembling. If the device is de-energized, and the manual has been carefully read, proceed.
- Remove the cover that is located above the stove. Release the latches and pull the protective element out of the slots.
- Remove the filter, remove the pipe connecting the hood and vent, remove air filter comforting element.
- Carefully inspect the housing and determine the degree of contamination.
To wash the pipe, grease filter and grate, any of the products that we will talk about below will do. But not every air filter needs to be cleaned. Look for relevant information in the instructions.
Effective folk ways to clean the grate from fat
There are many cleaning methods, and not all involve the use of expensive chemicals. Some improvised means are much more affordable and cope with fat on the hood elements just as well.
- Soda. You will need a large container. Put the dishes on the stove, pour water and turn on the fire. As the liquid heats up, add soda and stir constantly to dissolve. As soon as the mixture boils, send the mesh along with the filter into the container and boil for half an hour. During this time, even stubborn fat will easily go away.
- Laundry soap . To eliminate greasy deposits, add to a container with hot water some grated soap. Soak the parts of the hood in the solution for an hour, then remove and remove the remaining fat with a scraper or a hard sponge.
- Vinegar. It is not necessary to dilute table vinegar. Apply the product to the grate and leave for 30 minutes to dissolve the dirt. Next, remove the remaining fat with a sponge and rinse with running water.
- Lemon acid . Solution citric acid treat the contaminated surface and leave until the fat dissolves. Then walk with a wet sponge and rinse. If the first attempt does not provide the desired result, repeat the manipulation.
Video instruction
These funds are available in the arsenal of every hostess. They are affordable, effective and widely used for cleaning not only kitchen hoods, but also for bringing dishes, stoves, microwaves and other things to a divine appearance. household appliances.
How to use purchased chemicals for cleaning the hood
The stores sell products that provide quick results and are absolutely safe for all types of kitchen surfaces. Consider the popular household chemicals, which are most often used by housewives to wash the hood. These are Sanita, Cinderella, Efsto, Sunergetik and Silit Beng.
The above tools are very easy to use. They are applied to a contaminated surface, left for a few minutes, poured over with boiling water and washed off. cold water. This is enough to remove old fat and soot. When using household chemicals, be sure to wear gloves and masks, since the products contain acids and aggressive substances.
Video comparison of household chemicals
If the listed chemistry is not at hand, pipe cleaning fluid, “Whiteness” or common remedy for dish washing. Even a traditional baking soda-based cleaning powder will do.
Helpful information
How to wash the hood motor
If the cooker hood is used regularly and not properly maintained, grease, along with dust particles, settles on the internal elements, and the engine is no exception. It is better to entrust the cleaning of this unit to a specialist. It will properly turn off the engine and flush using a special solution.
If you decide to pay attention to the "heart" of the kitchen hood yourself, limit yourself mechanical removal fat layer, followed by treatment of accessible fragments with an alcohol solution. It's enough.
Chassis cleaning
After cleaning the internals Special attention give the outer case, because the cleanliness of the part affects the neatness of the kitchen. The insidiousness of this part is that dust sits on top of the fat, providing a cementing effect.
Iron scrapers and abrasive cleaners are not suitable for cleaning the case, as they leave scratches on the glossy finish. Liquid products are also inappropriate, because the likelihood of the mixture getting into the eyes is high. How to be?
Take dishwashing detergent, apply to a dampened sponge and treat the surface. After half an hour, wipe the case with a damp cloth. To remove the remaining greasy spots, use a rubber scraper used by drivers to clean car windows.
The kitchen hood is designed to eliminate odors, grease and fumes. Because of this, stubborn dirt and fatty deposits form on it very quickly, so the hood requires periodic maintenance. If you do not clean the ventilation grille, mesh and filters, the device will lose its functionality. With the outer casing of the hood, everything is clear and it is not so difficult to wash it, but what to do with the old layers of fat and soot on the ventilation grill and filter, this will be discussed in more detail in the article.
Preparing for cleaning work
If the hood has stopped removing odors and smoke while cooking, this is a sign that it is time to clean the device. Before you start cleaning the hood, you must adhere to some rules:
- Before disassembling, disconnect the device from the power supply.
- Remove the top cover by unfastening the special latches.
- Remove all removable parts of the appliance: grill, mesh, filter (on some models of hoods internal filters disposable, and they can simply be replaced with new ones).
- If the device works through an air vent, then, if possible, it is also necessary to dismantle the corrugation, or clean all its accessible places.
For parsing kitchen device it is better to refer to the instructions of a specific model.
6 tips on how to clean the hood easily and safely at home
The main components used to clean the device are budget and effective means that are in every home:
- any cleaning powder
- baking soda,
- dishwashing liquid,
- lemon,
- table vinegar,
- ammonia,
- laundry soap,
- foam/metal sponge.
You will need:
- large iron utensils
- 1 pack of baking soda
- laundry soap (if necessary).
Pour water into a large pot or bowl and place on the stove to heat. Add a whole pack of baking soda to the water (approximately 1 pack per 5 liters of water). As soon as the soda dissolves in warm water, immerse the grate or filter in the dishes, bringing the water to a boil. Thus, simmer for 30-50 minutes. As soon as you see that grease and soot easily move away from the grate, it is necessary to rinse under running water, cleaning hard-to-reach places brush.
For achievement best result, you can add grated laundry soap to boiling water.
You will need:
- dishwashing liquid,
- cleaning powder.
Soak the removable parts of the hood in warm water, adding dishwashing detergent (it dissolves grease well). Leave in water for 1 hour. Next, rinse the ventilation grill and filter under running water using a cleaning powder and a soft metal sponge.
If after the procedure there are still visible impurities, repeat the soaking again.
You will need:
- lemon,
- baking soda.
simple and fast way get rid of grease, soot and dust. Ventilation grill and the filter should be placed on a flat surface, covered with baking soda on top. Table vinegar (70%, undiluted) must be poured into a spray bottle and carefully sprayed from it onto sprinkled soda, especially good in places of heavy pollution. Leave in this state for 10-20 minutes. Rinse afterwards with clean water.
It is important not to forget to wear gloves, otherwise you can damage the skin of your hands.
You will need:
- baking soda,
- vegetable oil.
Soda has always been famous for being an excellent tool for removing grease and other contaminants. Stir vegetable oil with baking soda, in proportions of 1.5: 1, until the consistency of thick sour cream. Spread the mass on all removable parts of the device, and leave in this state for at least 30 minutes. After the dirt has moved away, rinse with water, additionally brushing.
After the procedure, the condition of the ventilation grill and filter will be like new.
You will need:
- lemon.
Cut the lemon into two halves or into several slices, they need to wipe all the contaminated areas on the grill and filter. Give lemon juice soak into old fat and soot for 10 minutes. After this time, wipe everything with a damp cloth. Repeat the procedure until a satisfactory result is obtained.
You will need:
- ammonia.
Half a glass ammonia dilute with 3 or 4 liters hot water, and immerse all contaminated removable parts of the kitchen appliance in the boiling mixture for several hours. After that, use a brush or sponge to remove the remnants of grease and dirt.
Important! Before starting the procedure, be sure to wear a respirator and create ventilation of the room, as there is a risk of burning internal organs due to the pungent smell of ammonia.
Household cleaning products
The range of household chemicals for cleaning old dirt is huge:
- Tools for eliminating pipe blockages, such as Sanox, Mole, Deboucher, Chirton, have a powerful cleansing effect. They are available in liquid, powder and granular form. The ventilation grill or filter must be placed in a container and filled with cleaning agent and a little hot water. The main thing is that the removable parts of the kitchen appliance are immersed in water. It is enough to leave for 5-7 minutes and you can remove the grate or filter from the solution by rinsing with cold water.
- Well corrodes grease gel-like cleaners for stoves and ovens (Sanitol, Shumanit, TOPCleanner). All removable parts of the device are also placed in a stainless dish, smear them in several layers with a cleaning agent and wait 10 minutes. After that, armed with gloves and a soft metal brush, remove uncorroded dirt.
- Another proven cleanser is regular whiteness. Which with a brush must be applied to a contaminated surface previously soaked with water, and wait 15-20 minutes. Wash off with running water.
Work with household chemicals should be extremely careful, using all safety measures.
In addition to folk cleaning products and household chemicals, there are some more tricks on how to clean the hood:
- Place the removable parts of the device in dishwasher using mild cleaners designed for the machine. According to numerous reviews on the Internet, it copes well with pollution.
- Steam cleaner with special nozzles in the form of sponges. It works from the mains, so it is only necessary to carry out on a contaminated surface. If this kitchen appliance is not available, then there are a lot of the above methods of getting rid of chronic fat, soot and dust.
Cleaning the outer surface of the hood
In addition, the outer case of the device also needs to be kept clean, because it also settles a large number of grease and dust. When cleaning the outer surface of the hood, be careful not to let cleaning agents run down onto your face and hands. Therefore, it is better to use special chemicals for stoves / ovens in the form of sprays that corrode dirt well. It is enough to leave the cleaner for 10 minutes and remove all dirt using a soft sponge that does not scratch the surface.
And in conclusion, I would like to say about one way that makes it easier to clean the kitchen hood. In order to make it easier to clean the grate, mesh and filter next time, the already clean removable parts must be lubricated with any oven or stove cleaner. Leave it to dry completely without rinsing, and put it back into the hood in the same way. In this case, the fat will settle on the cleaning agent, and not the filters and the grate, thereby making it easier for yourself in the future.
Severe contamination can be avoided if you follow the rules for caring for the kitchen appliance: wipe it with a damp cloth after each cooking, and do not leave the stove turned on if there are no dishes on it.
The kitchen hood often contains a large amount of old and well-dried fat, so most housewives ask how to clean the hood in the kitchen. Many people recommend cleaning the hood immediately after cooking and not waiting until it becomes very clogged. Since in this case you will have to make much more effort and spend a lot of time for this.
It should be noted that the hood is an important subject kitchen furniture, which allows burning and smoke to escape through the ventilation system. Combustion objects, leaving through it, clog the hood filter with unburned fat and many other pollutants.
In order not to disturb the normal functioning of the hood installed above gas stove should be carried out regularly to clean it.
In order to figure out how to clean the kitchen hood, you should understand the sequence of actions for yourself. All the main recommendations that allow you to independently remove traces of fat from all surfaces of the hood are given in the corresponding instructions for this product.
There will be a scheme for assembling and disassembling the structure, since the main activities related to the removal of old fat at home will be carried out precisely inside this device.
- To clean the mesh in the hood, you must first protect yourself by disconnecting the structure from the power supply. Otherwise, it is strictly forbidden to disassemble it, all the more you should not touch the motor and try to wet clean it.
- Directly on the hood itself there should be a diagram of how to remove the grate from the hood. It usually rests on snap-off latches. The carbon filter in the hood is usually hidden behind this grate. As a rule, it is on it that the bulk of pollution accumulates. In order not to think about how to quickly clean it of dirt, such a filter can simply be replaced - such products are not too expensive.
- When cleaning the kitchen hood from dirt, it should be remembered that it is connected to the ventilation outlet using a profile, round or corrugated pipe. It also accumulates a certain amount of soot and fat in the process of direct operation. Easiest to wash profile pipe if it's not too long. A longer structure should be round in cross section - this will not only facilitate its cleaning, but also slow down the accumulation of fat.
- Cleaning the kitchen hood filter from grease is not so difficult, but it will have to be removed. This is not too difficult to do, and if you know certain tricks, then the cleaning process itself will be quite simple and will take a minimum amount of free time.
- Nobody usually removes the body of the structure, it is washed both from the outside and from the inside.
- On the last step assemble the hood over the stove and connect it to the electrical network.
There are special hoods on sale in which filters of the turboair type are installed - their design does not imply that these elements can be cleaned, you will have to install new products instead. To find out if it is permissible to clean the hood from fat at home, you should carefully read the instructions.
It is worth saying that in any case, there should be a sufficient amount of cleaning products on hand. If you take into account certain nuances and subtleties, then getting rid of fat on a household kitchen hood will not be too problematic.
To clean the grate of the hood from grease, you should use special powders that should not contain abrasive materials, otherwise the surfaces will be scratched and lose their attractive appearance. appearance. Another disadvantage of using such products is the appearance of an additional relief on the surface, in which additional fat will accumulate, in the future it will be very difficult to clean it out from there.
There are a lot of options for getting rid of fat from the hood in the kitchen or in the bathroom. If you can’t choose a cleaning agent for walls and hoods in the kitchen on your own, then you can go to a specialized household chemicals store and consult with experts.
- If the hood is made from of stainless steel, then it can be rid of fat accumulations with ordinary baking soda. It is dissolved in a small amount of water and passed with this solution over contaminated surfaces.
- A fairly large amount of alkaline elements that can break down fat even in turboair hoods are contained in the most ordinary laundry soap.
- The hood from fat at home can be cleaned with high quality using ordinary dishwashing detergents. The stronger their action, the more likely it is that they will soon have to resort to using them again.
- The hood in the kitchen will be well cleaned of grease professional tools designed to remove contaminants from the surface of gas stoves.
It is worth noting that the choice of products for turboair hoods will be much narrower, in addition, these products are not intended for cleaning at all. Reliable products that allow you to clean the hood mesh from fat will not be relatively cheap, so you should immediately prepare for the fact that you will have to pay quite a lot for them. a large amount money.
Regarding how to clean the filter, there are a number of quite simple tips. You can remove all kinds of dirt from the surface of these small gratings using various ways. In particular, charcoal cleansers can be used.
These products also contain a large amount of alkaline substances that will dissolve fatty deposits and clean the grate. If desired, they can even process the fan motor and the fan itself. If the latter can get rid of fat deposits, then it will be much more efficient in removing combustion products and unpleasant odors, leaving only fresh air in the kitchen.
Many inexperienced housewives are wondering how to clean the hood from grease, if it has not yet gotten too dirty. First of all, in this case it is necessary to determine the degree of pollution.
Light degree
A light degree is indicated by light droplets of fat, which have not yet had time to harden, so it will be much easier to clean the mesh from the hood in this case.
With filters here, too, there will be no particular difficulties. The technique regarding how to clean the grate includes several actions.
- Take a container of suitable capacity, fill it with fairly hot water with the addition of baking soda or other detergent. Filters are immersed there, trying to make them completely under water.
- The container is left for about an hour or two, so that the filter can be cleaned there on its own without unnecessary physical impact.
- When the grease comes off the surface of the filters, wash off the remaining water with detergent. This is first done using warm water by gradually lowering its temperature. This procedure must be carried out fairly well so that not the slightest trace of detergent remains on the surface of the filter or the hood itself. Ultimately, this can have a very negative impact on the operation of the entire structure.
Severe degree
If the fat has acquired a dark brown color, this means that it has had time to harden quite strongly. In this case, you should use such a folk remedy as digestion.
Pour water into the container so that all the components of the hood are under it, put it on the fire and chop about half a piece of fairly cheap laundry soap there. Two tablespoons of baking soda are poured into the same container. Water is brought to a boil and boiled for about half an hour. If necessary, it will be necessary to add water, if suddenly it evaporates, and some elements of the hood appear above its surface.
If the hood is cleaned correctly, it will work reliably. With the maintenance of a clean state, major cleaning will have to be carried out no more than once every six months.
Do not know how to clean the hood in the kitchen from grease and burning? Do not despair. We will tell you about all the most simple and effective ways to care for a hood to create a fresh atmosphere in the kitchen. You can achieve this with a penny folk remedies and household chemicals, with little or no effort.
Preliminary preparation before cleaning the hood
If you have planned a full wash kitchen appliances, then get ready that you will have to scrub the cap, grill, filter and all the insides of the device. Before washing the hood, carefully read the instructions, unplug the umbrella from the network, and perform the following manipulations:
- Dismantle the hood mesh, which is located above the stove, by unfastening the special latches.
- Remove all removable components of the appliance: grill and filter.
Important! Some models have internal disposable filters that can be simply replaced with new ones.
Folk recipes for cleaning internal parts
There are many ways to clean the kitchen hood from soot and grease. Most of them are based on the use of improvised means.
soda solution
Cleaning the cooker hood with baking soda is very effective as sodium carbonate easily removes greasy spots from the surface. Usage:
- Pour 5 liters of water into an iron pan, and put it on the stove to warm up.
- When the water warms up, pour a standard pack of baking soda into it.
- After it dissolves, immerse the filter and grate in the container. After that, bring the brew on the stove to a boil.
- Boil on a small fire for about 30-60 minutes.
- Over time, you will notice that all contaminants are easily and simply removed from the surfaces. Rinse the elements with running water, helping to clean especially stubborn places with a brush.
- In order to enhance the effect, add shavings of laundry soap to boiling water.
Detergent + cleaning powder for extractor hood
- Soak the removable parts in a container with warm water, after adding a dishwashing detergent that fights grease.
- Leave everything in water for an hour.
- After that, using a powder and a soft metal sponge, rinse the filter and grates under running water.
- If at the end of the procedure there are still dirty areas, repeat the procedure from the beginning.
Recipe with vinegar essence and soda
simple and effective method to clean the hood in the kitchen from grease, dust and soot is the use of a combination of soda and vinegar essence.
- Lay the “ventilation” grate and filter on a flat surface, sprinkled with baking soda on top.
- Pour the vinegar essence (70% undiluted) into a spray bottle, and carefully spray all the soda with it, paying particular attention to the most contaminated areas.
- Leave to lie down for 10-20 minutes. Then rinse the parts with clean water.
Important! During kitchen cleaning, you need to watch your hands, so be sure to wear protective gloves before starting manipulations.
Soda + vegetable oil
- Mix soda powder with vegetable oil in proportions of 1/1.5 and stir until thick sour cream.
- Spread the resulting mass on the removable elements of the device, and leave it alone for half an hour.
- After the dirt is gone, wash everything with water, additionally help yourself with a brush.
- Such cleaning of the hood from grease will give the surfaces shine and cleanliness.
Lemon cleanser
- Divide a large lemon into two halves, or into quarters.
- Wipe all contaminated areas on the filter and mesh with them.
- Let the lemon juice soak into old grease and grime stains for about 10 minutes.
- During this time, wipe the surfaces with a damp cloth.
- Repeat everything from the very beginning until the result you are satisfied with.
Cleansing with ammonia
- Dilute half a glass of ammonia in 3-4 liters of hot water.
- Immerse all dirty parts in the boiled solution for 3-4 hours.
- After that, use a sponge or brush to remove the remnants of dirt and grease.
Important! Before you start cleaning the device in the apartment, be sure to put on a respirator, create ventilation in your home, otherwise there is a risk of burning internal organs with caustic vapors of ammonia.
Household chemicals in the fight for the cleanliness of the hood
To date, the range of household chemicals to combat pollution of the kitchen umbrella is huge. To your attention those who are sure to cope with stains:
- Spray Sanita - in a matter of minutes, "corrodes" fat accumulations, yellow plaque and other contaminants. Sanita is considered an express remedy, and is a leader in the market due to its budget cost and universal action. The drug is not designed for the care of varnished and enameled surfaces.
- "Anti-Fat" Cinderella. Gently removes the most stubborn dirt. Applicable on any surface. Just spray the product on the dirt, and after half an hour remove the residue with a sponge. Of the minuses - fast consumption.
- Synergistic. This gel is positioned as a natural and safe cleaning product that does not contain harsh chemicals. Pros: The gel is biodegradable. Also suitable for cleaning pans and for cleaning the oven.
- CilitBang "Anti-Fat + Radiance". Formulated with non-abrasive surfactants that gently work on the oldest soot.
Interesting! All gel preparations are used according to the scheme. Put the removable parts in a deep container, smear several layers with the product, and pour a little hot water over it. After 10 minutes, put on gloves, take a metal brush and remove the remaining fat.
- White- universal remedy for cleaning the exhaust hood at home. Apply it to the surface moistened with water and wait 20 minutes. Wash with water. Work carefully, observing safety measures.
To qualitatively wash the hood from fat, you can use some household tricks:
- Put everything removed parts appliances into the dishwasher using mild detergents designed for the dishwasher. According to the mass of reviews on the network, the machine will do the job perfectly.
- Steam cleaner with nozzles in the form of sponges. It is powered by electricity, so you just have to run it over the surface, melting the plaque.
Cleaning should be approached comprehensively, since often the extract in fat is not only inside, but also outside.
Important! When manipulating with outside Be careful not to spill cleaning products on your face and hands.
- We recommend using a variety of oven and hob preparations that are spray applied and corrode dirt and grease in just 15 minutes.
- Washing the device is recommended at least once every 3 months, or more often as it gets dirty.
In order not to worry about how to clean the hood when the fat has already eaten in, you should take care of the prevention of pollution:
- each time you have finished cooking, wipe off any oil drops from the device with a sponge;
- regularly (1-2 times a month) wash the filters;
- clean the product slowly, having studied the instructions for use of cleaning agents;
- minimize the operation of the burners "idle", as dry heat contributes to the formation of dense, thick soot on the surface;
- after washing the corrugation and returning it to its place, be sure to check the draft.
Timely care will allow you to keep the equipment clean and extend its service life. Give the little worker some time and she will repay you fresh air on the kitchen. What cleaning methods do you use? Share recipes with readers in the comments.
Video: Care of the kitchen hood with the help of folk remedies