Smooth and repaired walls and corners are the key to properly carried out repairs. Wallpaper pasted onto such surfaces will look presentable, regardless of the appearance of the quality of the finishing material itself. But to level the walls and corners, you need to spend a lot of time and building materials. For example, you will have to apply two or three layers of putty, each of which must dry for at least a day, a primer is applied in three layers, each layer will take 6-8 hours to dry. Add here the application process itself. So it will take several days to level the walls and corners.
And if there is no opportunity, time, money and desire to engage in leveling activities, then you can try gluing wallpaper on uneven walls. To do this, you should not use paper wallpaper, photo wallpaper, with a small vertical pattern, canvases on which dependent patterns are applied, because it will simply be impossible to adjust them to each other. Which ones are possible?
Thick vinyl and non-woven wallpaper will suit this situation just right. At the same time, experts note that it is better to use non-woven finishing in living rooms, bedrooms, and hallways, because it is more noble in appearance. appearance. Vinyl is best used for finishing kitchens, hallways and other office spaces.
It is necessary to take into account that the backing of non-woven wallpaper is the thickest of all the options under consideration. Therefore, this particular category of wallpaper material is considered to be the best when the task is to glue wallpaper to uneven walls and corners. And one more point that worries many consumers. This theme is the breathable structure of the wallpaper you choose. It should be noted that today almost all wallpaper categories and groups are such. Currently, new technologies make it possible to produce vinyl and non-woven wallpaper with micropores through which air can easily pass in two directions.
Technology for sticking vinyl and non-woven wallpaper
In fact, gluing wallpaper of these two categories to uneven walls and corners is not difficult. But there are certain specific nuances. Eg:
- Gluing is done only end-to-end.
- The adhesive composition is applied not to the surface of the wallpaper, but to the wall being finished.
- You need to use glue intended for stickers certain type: either only for vinyl, or only for non-woven ones.
- When dried, both types do not decrease in size.
- The synthetic base does not allow it to peel off from uneven wall surfaces, which guarantees long-term operation of the wallpaper. By the way, in places where there are differences in plane, paper wallpaper peels off and swells due to the uneven tension of the canvas.
Attention! If the room has uneven walls and ceiling, then in the corners between them the curvature of the laid wallpaper will be very visible. Therefore, you will have to install it in the corners of the room under the ceiling. ceiling plinth, it is better if it is gypsum rather than polyurethane. The second one looks very simple with noble wallpaper.
So, the technology for gluing wallpaper is that first, markings are applied along which strips of finishing material are laid. Usually the process starts from a corner and moves along the wall. But since the corners of the room are uneven, it is necessary to close them correctly. Therefore, the canvas is laid in such a way as to immediately cover part of it uneven corner. For example, as shown in the photo below. That is, you should not join the edges of two canvases in the corner of the room.
In principle, you can use standard technology with overlapping edges of the wallpaper in the corner area.
- The first strip is laid on the wall adjacent to the window. In this case, the edge of the material extends 3-5 cm onto the wall with the window (this area is not glued).
- The second strip is laid on the wall in which the window opening is located, exactly along the vertical line of the corner with the same overlap (it is also not glued).
- Now sharp knife you need to make a cut along the corner, cutting off the un-glued edges of the two wallpaper strips. They are removed, and the new edges are coated adhesive composition and pressed against the wall surface.
Note! You only have to cut once, so you don't want the cut to be uneven. Therefore, use a metal ruler for this, and the process itself must be carried out in one go. No stopping or “I’ll try again.” Clearly, smoothly and quickly.
Alternative methods
It should be noted that it is possible to put wallpaper on crooked walls, but it is not always possible to hide large defects. This is especially true for recesses. Filling them with putty is quite difficult; it is not a crack or chip that has sharp edges. The putty solution adheres well to them. A deep recess is, in fact, a depression. By covering it with wallpaper, we get emptiness underneath. finishing material. Therefore, you will have to imagine.
Look at the photo above. Here is one of the options for how to hide a large unevenness in a wall covered with wallpaper. In this regard, the wallpaper itself is laid in a wave, thereby hiding the flaw. At the same time, the design approach solved not only the problem of the wall surface, but also made it possible to original interior rooms. The wave finish is actually beautiful and unusual, but it is also functional. Shelves were created on the wall, which, due to the dense structure of the material, can withstand certain loads. In any case, a couple of books will easily rest on them.
Or this option in the photo above. The place of the big drop is covered with a large mirror. Of course, you will have to take into account the wishes and capabilities of the owner. That is, does he need the same mirror in this place? Or will it fit into created interior. Although a mirror is just one option. For example, you can cover an uneven wall with a large piece of furniture - a wall or a slide. Hang a photo or painting. There are plenty of options.
Another opportunity to hide the unevenness of the wall. To do this, you can use wallpaper saturated with the same type of repeating pattern of an even geometric shape. Such a drawing purely visually blurs the boundaries; it seems to smooth out the surface with its repetition. That is why defects under the finish are not visible. It is impossible to say which of the proposed options is better. Everyone chooses for themselves. It is important to glue the wallpaper correctly, exactly according to the technology, so that it does not become a defect in the wall itself.
So, you can glue wallpaper on uneven walls. Which technology to choose is decided only by the owner of the house.
How to hide uneven walls with the right wallpaper?
Good home renovations and tastefully chosen furniture are every person’s dream. But all this beauty can be destroyed by uneven walls. An uneven wall spoils the appearance of the room, and all the irregularities on it are striking. There are several methods and materials to hide all defects on the surface. And one way to put them in order is vinyl and non-woven wallpaper for uneven walls. In this article I will tell you what kind of wallpaper this is and how to hide uneven walls with the help of properly selected wallpaper.
Vinyl and non-woven lining will help hide crooked walls
It’s hard to believe that wallpaper for uneven walls can give not only beauty, but also the appearance of a completely flat surface. Often and densely, people try to cover uneven walls with furniture so that they do not catch the eye. But this is just not right.
Unevenness on the wall should be masked not with furniture, but with vinyl and non-woven materials. wall coverings. And, of course, everyone agrees that a large number of The furniture in the room makes it feel cramped, but I would like space.
Wallpaper is the most best option, both for creating a unique interior in the house, and for covering unevenness on the walls.
Vinyl is a type paper covering, upper layer which is covered polymer material or polyvinyl chloride. They consist of two layers: a paper or non-woven layer and a layer of polyvinyl chloride. It is this top layer that creates not only unique designs, but can also hide all defects.
Types of vinyl:
- Compact - vinyl. Such trellises have a pronounced surface in the form of heavy materials: textured plaster, stone, textiles. Quite durable and resistant to mechanical stress. Due to the fact that they have a textured top layer, they are great for hiding all the unevenness;
- Silkscreen printing. The most extensive view of vinyl wall materials. Having a huge range and unique design, the look has gained immense popularity among consumers. Its texture is subtle; the silk effect on the wallpaper is created using smoothed vinyl;
- Thick vinyl trellises. They have excellent resistance to mechanical stress and do not fade when exposed to direct sun rays. They are not afraid of moisture and can be washed.
Non-woven coverings are a material based on textile and cellulose fibers. This material perfectly covers all cracks and irregularities on the wall.
They can be glued to different types finishing materials. plaster, concrete, drywall, paper, wood. They do not need to be lubricated with glue and wait until they are soaked. For high-quality service, it is enough to apply glue to the surface of the wall itself.
Types of non-woven fabrics:
- The first type consists of one non-woven fabric. There is no relief on such trellises. The drawing is applied using printing;
- The second type is a material in which non-woven fabric is the primary base, and a pattern is applied to it. They are often called vinyl with a non-woven backing.
Selecting a pattern texture
Much when choosing leveling wallpaper depends on the texture of the pattern and its color. These factors, in the literal sense of the word, can make great changes to all surfaces in the house, as well as correct all unevenness.
Large patterns visually reduce space. In the case when it is necessary to visually enlarge the space, you need to use drawings with small and sparse patterns. If part of the house is large (spacious), but it seems that it is not cozy, you can use striped wallpaper.
A vertical stripe and any other vertical pattern visually reduces the room, but at the same time creates the appearance high ceiling. When using horizontal stripes, we get a low ceiling and visually wider than the walls.
Checkered patterns are used in those rare cases when you need to make a heavy ceiling. At the same time, the height of the room decreases. To increase small space You can use a little trick - a pattern in the form of diamonds.
Spotted patterns, like spray paint, will make unevenness on the walls invisible. Also, as a leveling material, you can use wallpaper with a variegated pattern, but only in cases where there are ledges and beams in the room.
The color of the pattern on the wallpaper also has a leveling effect on the walls and the atmosphere in general. So, if the windows face south, then to create some coolness you need to use blue, green, blue colors. And what to create warm atmosphere- use warmer colors. Sunny shades will replace the lack of ordinary light.
Deep, rich tones are great for large rooms, but in small rooms it is not advisable to use them - they visually narrow the space. The color red in the bedroom will give you vigor, and in the office it will charge you with energy. It is recommended to use orange and yellow colors in the nursery.
It is easy to hide existing defects and the room turns into an ideal one when properly selected wallpaper is applied to the walls. Their choice is the hard half of all the work to achieve good repair. To do this you need to have patience and strength.
“Wallpapering. Trimming in the corner"
A practicing wallpaper gluer explains how to properly glue wallpaper, and especially focuses on gluing the corners correctly so that the seams do not separate.
http://stenamaster.ru
Despite the huge diversity decorative coatings for walls, wallpaper is still the most popular finishing material. But the technologies for their production do not stand still, and manufacturers offer many different types of wallpaper in appearance and properties. To understand which option to choose for decorating your home, it’s a good idea to understand what modern types of wallpaper exist.
Paper wallpaper
Single-layer paper wallpaper is the cheapest and most environmentally friendly, allowing walls to “breathe.” However, they are not very durable and strong, they quickly lose their appearance, get dirty, fade in the sun and absorb odors.
There are improved versions of paper wallpaper - two-layer duplex (smooth and embossed) and structured wallpaper, which consists of two layers of paper, between which compressed sawdust is randomly located. Such wallpaper is more durable, can withstand wet rubbing, helps hide minor wall roughness and can be used for painting.
Vinyl wallpapers
Vinyl wallpaper is the most interesting material for finishing walls, since their manufacturing technology allows you to imitate almost any coating. They have two layers: the bottom one is paper or a fabric base, the top one is polyvinyl, on the surface of which embossing or a pattern is applied. Such wallpaper is easy to clean, does not fade in the sun, is durable, elastic, does not absorb moisture, but practically does not allow air to pass through. They are flat (silk-screen printing and acrylic), foamed, dense and embossed, for painting.
Foamed vinyl is a fairly thick wallpaper with a pronounced relief that successfully hides unevenness on the walls. In silk-screen printing, silk threads are sewn into the top layer, which gives the canvas shine and original look. Dense vinyl wallpapers have smooth surface and are often used for the kitchen.
Embossed wallpaper - the thickest and heaviest, imitates ceramic tiles, a natural stone, Venetian plaster.
The main difficulty when gluing vinyl wallpaper is that it is very elastic. When glue is applied, they stretch greatly, and when dry they shrink, as a result of which the seams can come apart.
Non-woven wallpaper
Non-woven fabric is a mixture of cellulose and textile fibers. The use of this material expands the operational and decorative possibilities, allows you to achieve. Non-woven base in rolls long length Paintable wallpaper is available.
Non-woven wallpaper perfectly masks cracks on the plaster surface and is suitable for almost any type of surface. When gluing such wallpaper, the glue is applied directly to the wall, and the canvases are applied to it dry, which greatly simplifies and speeds up the fitting process. When choosing non-woven wallpaper, it is important to know how to glue non-woven wallpaper and what glue to choose. When pasted, non-woven wallpaper almost never becomes deformed.
Non-woven wallpaper perfectly masks cracks on the plaster surface and is suitable for almost any type of surface.
Velor wallpaper
When making velor wallpaper on paper base special adhesive paints are applied, onto which tiny nylon fibers are attached. This wallpaper looks luxurious and is ideal for formal rooms.
They shimmer in the light, absorb sounds perfectly, but attract dust, are quickly wiped off from mechanical stress, cannot withstand changes in humidity and absorb odors. To glue velor sheets, use glue for heavy wallpaper.
Felt wallpaper
Felt wallpaper is made from acrylic, polyester and microfiber fibers, and they look like soft pile on the wall. The canvases look like fabric, and the joints between them are completely invisible. They are perfectly breathable and easy to clean. To reduce waste, felt wallpaper is sold not in rolls, but linear meters. They have a porous structure, so the glue is applied not to the canvas, but to the wall.
Textile wallpaper
Textile wallpaper consists of two layers: the bottom layer is made of durable paper and the top layer is made of woven material or threads glued together. They look impressive, absorb noise perfectly, do not fade, are environmentally friendly and fireproof, but require careful attitude and are more suitable for bedrooms, offices and living rooms.
Wallpaper is made from cotton, viscose and linen threads, as well as threads containing natural and artificial fibers.
For sticking textile wallpaper it is necessary to use adhesives for heavy wallpaper, soak the canvases for at least ten minutes, do not bend them after spreading, and also try to prevent the glue from flowing onto outside and did not leave stains.
Cork wallpaper
Cork wallpaper consists of cork oak bark and is the most environmentally friendly, since only natural products. During hot pressing, adhesive substances are released from the cork, and it sticks itself together. Most common cork wallpaper on paper basis.
They are glued with glue for heavy wallpaper and adhere perfectly to any base, are wear-resistant, and coated with varnish or wax are well protected from moisture and dust.
Cork wallpaper consists of cork oak bark and is the most environmentally friendly.
Liquid wallpaper
The so-called liquid wallpaper allows you to create smooth or textured coatings with no seams and represent decorative plaster based on natural cellulose, cotton or textile fiber. They are sold ready-made or in the form of a dry mixture that must be diluted water-based paint and tint.
Liquid wallpaper is waterproof, does not absorb odors, is easy to clean, masks wall imperfections, is suitable for application to any surface and allows you to create any pattern.
Fiberglass wallpaper
The material is based on fibers made from special glass based on quartz sand, soda, dolomite and lime. They are moisture resistant, durable, fire resistant, do not contain toxic components, do not collect dust, are easy to clean, “breathe” well, can be applied to any surface and give any room an aesthetic and modern look. Fiberglass wallpaper is often used for wall decoration in offices, shops, hotels, medical institutions etc. They can be painted and repainted many times.
When carrying out finishing work that involves gluing wallpaper, situations quite often arise when the surface has small defects associated with an uneven structure and roughness. However, putting putty in such situations is not always rational, since there is no need to obtain perfect smooth wall, which is usually prepared for painting. It is in such cases that experts recommend using thick wallpaper for uneven walls, which can hide all defects.
Features of use
To begin with, it is necessary to say that the walls are large differences or pronounced defects should still be subjected to pre-treatment for straightening. The fact is that even wallpaper that hides wall unevenness cannot eliminate major deficiencies in surface quality. Therefore, this installation option should not be considered a panacea for defects in the preparatory stage.
Choice
- First of all, it should be said that there are a number of various types similar materials created from different components and having their own unique properties. Taking this into account, choosing which wallpaper will hide uneven walls must be done very carefully, first focusing on the practical component, and only then on the appearance.
- Special attention professional craftsmen It is advised to use foam materials. They are most suitable for the task and have a stunning appearance.
- When deciding which wallpaper to glue on uneven walls, quality suitable material determined by touch. It is believed that the denser and thicker it is, the easier it is to cover all surface imperfections and cope with the task.
- It is also necessary to mention that all such types of coating have quite impressive weight. Therefore, they need special glue. Typically, manufacturers of such compositions write on the packaging that this substance is specially intended for heavy wallpaper.
- It is important to mention that when deciding which materials to choose, you should immediately inquire about compatibility with the adhesive. In this case, it is advisable to select all the necessary substances from one manufacturer.
Advice! Considering that there are a lot of varieties of such wallpaper, it is better to immediately ask the seller about the unevenness that they can cover. The point is that everyone separate species has its own unique technical characteristics.
Installation
- To begin with, the manual, which tells how to paste wallpaper on uneven walls, involves doing preparatory work. Moreover, this process has nothing to do with existing defects.
- First, the surface is treated with a brush with metal bristles to remove fine layers and dirt from it.. As a result, a certain corrugation may appear on it, which will enhance adhesion to the wallpaper.
- Further installation instructions advise. It should reduce the level of surface absorption.
- On next stage it is necessary to apply a second coat of primer, but only after the wall has completely dried. This is necessary in order to create a durable film that will act as a kind of binder and increase the level of adhesion.
- You should not skimp on the primer, since its price is less than that of glue, which means it must be used until the surface stops absorbing moisture.
- Next, professional craftsmen recommend using glue to apply it thin layer as a basis. However, it must be allowed to dry.
- At the final stage of work, the wall is usually covered with wallpaper in accordance with the instructions for the selected material.
Advice! Do not neglect the instructions that come with the wallpaper or glue itself. They can contain very valuable installation instructions and features.
- When installing it yourself, it is very important to understand that wallpaper with glue applied is quite heavy. Therefore, it is necessary to wait until the composition begins to die and only then carry out work.
- You should always have a clean rag or rag on hand, which is used to remove excess glue from the surface. It can destroy the top layer of coating, which will ruin the appearance of the final product.
- If heavy ones are used, then when applying the dye it is necessary to use a minimum amount of it. Do not over-wet the surface, increasing its weight.
Conclusion
By watching the video in this article you can get detailed information about what the data is and how it is assembled. Also, based on the text given above, it should be concluded that when choosing such materials there are no specific criteria or features, but in preparatory work you should be extremely careful.
From the author: Summer is in full swing, everyone is relaxing and enjoying the sea, and you have to urgently correct repair defects and figure out how to hide uneven walls? We welcome you to our website, we are ready to help and tell you about the main design secret. Let's work on the mistakes and determine which wallpaper to choose for uneven walls! Let's try to find a solution to the problem together.
First you need to decide on the design, layout and choice of materials, and finally - on the final type of finishing: will it be plaster, drywall or decorative wallpaper. Agree, this sequence corresponds to most construction repair work. It is quite difficult to decide on what to choose, especially with the existing volume of construction materials on offer, as well as information articles on the World Wide Web. We will try to help you with this. You have already taken the first step - you have chosen our website!
Assessing the situation: we perform surface defect detection
Smooth walls are very good, because such a surface makes it quite easy to carry out Finishing work of any complexity, and even more so. But, as disappointing as it may be, very few can boast of a perfectly smooth wall surface in their premises, especially in standard apartments old building.
Important: in a situation with large differences and obvious defects on the walls of your rooms, you need to approach the repair work with the proper consistency and thoroughness, so to speak. Uneven walls can and should be leveled! If the defects are minor, then you can save money and time and use design secrets.
When choosing wallpaper in a situation where there are uneven walls, it is important to be guided not only by personal taste and preferences regarding color range and style, but also the problem of defects. Manufacturers, of course, know about the existence of such a problem and are ready to offer quite wide choose wallpaper that can be glued without much difficulty to problematic walls. After all, due to their characteristics, appearance and performance properties, they are suitable for gluing to any surface, including those with protrusions, bumps and depressions. Texture and pattern will help hide and camouflage defects and unevenness of the walls. So all that remains is to decide which wallpaper to choose.
What do our people advise us? experienced craftsmen, what wallpaper do they prefer during renovation to hide unevenness? We invite you to listen to the recommendations:
Types and characteristics of wallpaper
Let's look at photos and the most common types of wallpaper that can be successfully used for problem walls.
Duplex
If you glue ordinary paper wallpaper to walls with defects, then all these defects will clearly appear. Manufacturers offer to take advantage of a special type paper wallpaper which are called duplex. They are made from two thick layers of paper, which are pressed into one piece and feel like cardboard. They also contain various types of embossing and often repeating patterns, which makes it possible. Among other things, they hold their shape well and stick perfectly to an uneven wall, because they do not need to fit tightly over the entire surface. All potholes and bumps will be hidden! And such wallpapers are very affordable in price; any average person can afford them.
Important: An additional property of the duplex is environmental friendliness, which allows it to be used in a nursery and bedroom!
Source: this-wallpaper.ru
Vinyl
Durable and bright. A good alternative to duplex wallpaper would be vinyl samples, although they are already in a higher price segment. They will serve you for a long time, remaining bright and fresh. In addition, on bright wallpaper, the unevenness of your walls does not stand out so much, and the thickness and deep texture will allow you to hide the most complex defects. Among other things, they have the ability to copy texture natural materials for finishing, which will give your room a noble, “rich” look.
Source: alberomarket.ru
From the total mass of vinyl wallpaper that is used to decorate walls with uneven surfaces, the following areas can be distinguished:
- quite simple and inexpensive option is foamed vinyl; its sufficient thickness will hide all surface defects. The disadvantages include the relative fragility of this material, as well as its insufficient strength. However, from an aesthetic point of view, such wallpapers will look better than duplex ones; we advise you to pay attention to them before considering more expensive options;
Source: remontiruem.com.ua
- Wallpaper made of washable vinyl will look good and practical in the kitchen. It should be taken into account that on their glossy surface it is the bulges of your walls that will be clearly visible, so we advise you to remove them; it is better to leave the recesses and pits;
Source: kuhniclub.ru
- A great option is hot-stamping vinyl wallpaper - the fabric is the densest, strongest and most durable. They can be washed repeatedly, and the structure allows you to hide quite large plots uneven walls. The only thing we recommend is to abandon the glossy design of such wallpaper, since it will flicker at the bends in the places of depressions and bulges. The price of such wallpaper is quite significant, but their quality is correspondingly impeccable.
Source: chipak71.ru
Non-woven wallpaper
A good material for hiding unevenness is also non-woven fabric - a combination of paper and fabric components. It has a high density and relief embossing on the surface. Wallpaper made from it is very dense and hard. Sometimes a decorative detail is added - a vinyl backing. Non-woven wallpaper comes in white and colored. Most often they are made white, ready for further coloring. Painting is done after gluing the sheets to the wall. Painted wallpaper has a matte appearance, which further helps hide uneven surfaces.
