Which iron doors are best for an apartment? How to choose a reliable front door and protect yourself from intruders? What should the thickness be?

Metal doors are used to equip apartments and houses. Such products are highly durable, wear-resistant, resistant to moisture and retain heat well.

When choosing models, pay attention to the security system and technical reliability.

How to choose a metal door

The base of the metal door is made of aluminum or steel. Steel structures are more durable and provide high-quality noise and heat insulation.

Aluminum sheets are lightweight and therefore easy to install. This material allows for many finishing options.

Pay attention to the way the door opens. It is better to choose designs that open on both the left and right sides. External or interior doors choose depends on taste preferences.
Consider specifications model, because it will constantly be under mechanical and temperature influence. To keep your product looking longer, choose powder coating or finishing with oak panels.
The level of noise and heat insulation are important criteria. As a rule, a metal door is insulated using mineral wool, polystyrene foam, and corrugated cardboard.

For internal filling mineral wool is best suited for products; it is an environmentally friendly material with high thermal insulation properties. Other materials are cheaper, but can crumble quickly.

The door must have a reliable security system against unauthorized entry. IN metal constructions, which are used for domestic purposes, locks of 1-4 burglary resistance classes are built in.

By type, locks are divided into lever locks with increased security and cylinder locks, which are subject to recoding in case the keys are lost. Usually, modern models equipped with these two locks.

Pay attention to the quality of the fittings. This includes door hinges, handles, chains, eyes, and other decorative elements. The aesthetics and beauty of these details also testifies to the reliability of the accessories.

Pay attention to the door hinges. Do not buy products that have fewer than three loops. Consider the opening angle of the structure: 90, 120, 180 degrees. The higher this indicator, the better.
It is better if the model is made of a solid-bent profile.
When choosing a door, check the thickness of the door leaf. The minimum value is 40 mm, but the structure will not be protected.

The thicker the fabric, the more reliable the protection and the higher the thermal insulation characteristics. In severe winters and constant frosts, the optimal option would be a thickness of 80-90 mm.

Pay attention to the thickness of the sheet, the optimal figure is 2-3 mm. Do not purchase products with a steel thickness of less than 0.5 mm; such structures are susceptible to dents and have a short service life.

The thickness of the door frame must be twice as thick to withstand the fastening of the fittings.

The most vulnerable places of the door leaf should be sealed with stiffeners. This improves the performance characteristics of the product and reduces the risk of deformation.
Please note whether the product is equipped with an armor plate; this is a mandatory component of the kit.
Choose models with ball hinges and anti-cuts that are attached to the hinge side.
The tightness of the structure is ensured by a double-circuit seal, which protects against foreign odors, drafts and retains heat well.
The diameter of the locking bolts must be at least 16-18 mm.

The design and decoration of the door depends on your preferences. A popular finishing option is plastic panels, which are wear-resistant and impact-resistant.

With the help of polymer painting, the structure acquires new color and protective characteristics. Varnishing is a type of coating with a high level of resistance. Wood finishing is the most environmentally friendly and effective way of decoration.

When choosing a color, be guided by your taste, but keep in mind that dark fabrics will retain their presentation longer.
It is advisable that all fittings be made by one manufacturer.
The presence of a manganese plate will prevent the door from being drilled.

The best metal door with a thermal break

NORTH used in harsh winter conditions, withstands temperatures down to -39 degrees, vulnerable areas are reliably sealed with contours. The thickness of the canvas is 80 mm. The design is reliable as it is equipped with 10 locking points.

The average weight of the model is 100 kg. The stylish design and beautiful appearance are ensured by the polymer powder coating of the model. The door is simple to install, easy to maintain, wear-resistant and durable if used correctly.

Characteristics:

weight – 100 kg;
dimensions – 860 by 2050 (960 by 2050) mm;
2 sealing circuits;
10 locking points;
canvas thickness – 80 mm;
polymer powder coating.

Pros:

the structure does not freeze, there is no ice;
reliable protective system from penetration;
multilayer insulation system;
functionality;
thermal resistance;
wear resistance and durability;
average weight, transportability;
high-quality fittings, reliable fastenings;
convenient installation and maintenance of the door.

Minuses:

high price.

The best metal door with thick leaf

Canvas Trio Metal, insulated with mineral wool, thickness – 80 mm. The model is sealed with three contours in places that wear out quickly. Hinges on bearings ensure the door opens 180 degrees, and the peephole provides a wide view.

The design includes 2 locks and a night bolt. For interior decoration, moisture-resistant PVC coating bleached oak color. A product with reliable burglary protection, high heat and sound insulation.

Characteristics:

canvas thickness – 80 mm;
dimensions – 2050 by 880 (980) mm;
the canvas is filled with mineral wool;
three sealing circuits;
MDF panel finishing;
door with special powder coating;
fittings (2 locks, night bolt, hinges, peephole, handle).

Pros:

resistance to mechanical damage and atmospheric influences;
high thermal insulation characteristics;
convenient equipment, reliable fittings;
stylish and high quality interior and external finishing.

Minuses:

weighty and large-sized product.

The best metal door made in Belarus

Design Вeldoors Chocolate Available in two sizes. The door opens from both sides. Beautiful design and high-quality finishing using PVC. Simplicity geometric shapes and dark chocolate color give the design elegance and special charm.

Characteristics:

dimensions – 860 by 2060 (960 by 2050) mm;
2 sealing circuits;
filler – ISOVER mineral wool;
covering – structured MDF panel;
accessories (2 hinges with bearings, 2 locks, night bolt, anti-removal pins).

Pros:

Possibility of opening from the right and left sides;
environmentally friendly insulation;
external and internal finishing of MDF;
compaction of vulnerable areas of the metal sheet;
the main lock is protected by an armor plate;
stylish design;
quality headset.

Minuses:

difficulty in care;
accumulation of dust.

Best metal soundproof door

Design LEGANZA FORTE ideally combines aesthetic appearance and high quality: sound insulation, insulation. Adjustable hinges prevent the door leaf from sagging. The product has reliable burglary protection, the external finish is powder coated.

Characteristics:

modular layout;
canvas thickness – 60 mm;
5 stiffeners;
double porch;
weight – 85-115 kg;
maximum opening size – 1020 by 2300 mm;
fittings (hinges, locks).

Pros:

anti-corrosion protection;
locks with recoding;
built-in protection against the most popular hacking methods;
high sound and heat insulation;
equipped with adjustable hinges that prevent the fabric from sagging;
convenient and practical design.

Minuses:

large door;
low transportability.

The best apartment metal door

Design Akron 1 reliable, wear-resistant, durable. The doors are made of metal sheet 65 mm thick, providing good sound insulation. In vulnerable places they are sealed with special contours.

Reliable protection is provided by fittings: hinges, locks, anti-removal pins. The door has a Guardian 10.11 main lock with a second class of burglary resistance.

Mineral wool is used as a filler; the material is environmentally friendly and safe for health.

Characteristics:

canvas thickness – 65 mm;
filler – mineral wool;
2 sealing circuits;
reinforcement of the canvas in unreliable places;
accessories (locks, anti-removal pins, hinges).

Pros:

burglary resistance;
dense fabric provides excellent sound insulation;
reliable fastening of accessories;
strength and wear resistance;
durability subject to operating rules;
high sound insulation.

Minuses:

difficult to transport.

Best metal door with MDF finish

Design Profdoor-MD10 weighty and large in size, suitable for decorating the entrance and front doors of an apartment. Thanks to the built-in stiffening ribs, the elastic metal sheet becomes reliable and durable.

The door is equipped with a reliable security system, there are lower and upper locks and a peephole. The noise and heat insulation of the model is at the highest level; this design will bring comfort and coziness to the house. MDF finish is used to create a natural effect.

Characteristics:

dimensions – 200 by 80 cm;
weight – 70 kg;
2 pyramidal stiffeners;
MDF finishing;
reinforcement with profile pipe;
noise and thermal insulation of the door vestibule;
accessories (two locks, peephole).

Pros:

the structure is protected from outside penetration;
high-quality insulation of the model;
high sound insulation;
Stiffening ribs ensure wear resistance and reliability of the structure;
MDF finishing brings the model closer to a natural design.

Minuses:

weighty design.

The best metal door for a private home

Wear-resistant Arma Standard-1 Tight design with two sealing circuits. To make the door, a bent metal profile with stiffeners is used. The product is equipped with a cylinder and lever lock, a peephole, and chrome-colored fittings.

Reliable protection against burglary is provided by anti-removal pins. The metal door is powder-painted and resists corrosion and mechanical damage. Although the design is heavy, it opens easily and without unnecessary sound effects.

Characteristics:

canvas dimensions – 880 x 2050 mm;
thickness – 80 mm;
filler – mineral cloth “URSA GEO”;
MDF finishing;
external powder copper coating;
fittings (sealing contours, hinges, pins, night bolt).

Pros:

large thickness of metal sheet;
high level of sound insulation;
high-quality filler, high-quality insulation;
reliable protection against burglary;
Possibility of opening on both sides;
beautiful external design, stylish design;
convenient equipment.

Minuses:

heavy construction.

The best metal door for technical rooms

2DP-1S installed in buildings and public places, made from high-quality and wear-resistant materials.

The door is designed taking into account the latest technologies, equipped with reliable burglary protection and fire resistance. Two types of seals are used. Stylish design and beautiful finish powder-polymer coating.

Characteristics:

dimensions – 1400 by 1000 (2350 by 1750) mm;
external finishing with powder-polymer coating;
two contours of rubber seal, thermally expanding seal;
design of the box (with or without a threshold, in the overhead or in the opening);
equipping with fire-fighting mechanisms;
fittings (crossbars, locks).

Pros:

high technical safety;
several design options;
high-quality external finishing, beautiful design;
reliable insulation;
supply system fire safety.

Minuses:

quite heavy design;
difficulties during transportation.

The best double leaf metal door

DZ-98 Designed for wide doorways. The weight is distributed approximately equally on both parts of the door leaf, so the load on the hinges is significantly reduced.

The design is strong, wear-resistant and durable. The fittings include two locks and a peephole with a 180-degree view.

Characteristics:

type – front double doors;
dimensions – 2000 by 800 mm;
finishing (powder coating);
equipped with top and bottom lock;
number of loops (2);
insulated with mineral wool;
equipped with a peephole with a 180 degree view.

Pros:

uniform load distribution;
reliable protection against penetration;
wear resistance, durability;
stylish design and good finish;
the structure is insulated;
convenient equipment.

Minuses:

Only suitable for large openings.

The best metal door with internal opening

DS-7 Designed for installation in office and residential premises. The structure is made of one-piece bent door leaf (two metal sheets, 4 stiffeners). The product is equipped with locks of burglary resistance classes 3 and 4.

Wear-resistant design with two sealing contours, insulated with environmentally friendly mineral wool. Stylish design, wide choice for decorative finishing. High-quality accessories will give reliable protection, comfort and coziness.

Characteristics:

4 stiffening ribs;
dimensions – 2000 by 880 (2100-980) mm;
two seal circuits;
the structure is insulated with mineral wool;
fittings (hinges, peephole, lining, handle).

Pros:

wide range of decorative finishes;
environmental Safety;
high-quality fittings;
insulation with mineral wool;
5 available sizes;
the design is wear-resistant and durable;
burglary protection (class 3 and 4);
durability and reliability.

Minuses:

there are no anti-removal clamps.

Which metal door is better to buy?

Let's compare the main technical characteristics of the models to find out which of them are best suited for equipping an apartment or house.

The thickness of the metal sheet must be at least 2-3 mm; the designs presented in this rating correspond to this indicator.
Let's pay attention to the thickness of the canvas; there are models with high (80-90 mm) and medium (60-70 mm) parameters. To support the shape of the metal sheet, sealing contours and stiffeners are used.

Among the best doors are North, Trio Metal.

An important criterion is the level of heat and noise insulation, which depends on the thickness of the door leaf and the insulation used. All structures from the rating are insulated with environmentally friendly mineral wool.

The anti-corrosion model LEGANZA FORTE has excellent sound insulation.

We pay attention to the quality of the fittings: locks, hinges, door handles. Buy models Akron 1, Arma Standard-1, they are equipped with the necessary accessories.
The security system determines how protected the structure is from hacking. Products with high-quality protection – LEGANZA FORTE, North, Profdoor-MD10.
The finishing of the products is varied, models with powder coating (LEGANZA FORTE) and MDF (Trio Metal) are available.

All models are different stylish design, the most original is Veldoors Chocolate.

So, among the best models are North, Trio Metal, Veldoors Chocolate, LEGANZA FORTE. These are products with high wear resistance of the metal sheet, good sealing and insulation, a reliable protection system and good external finishing.

How to choose entrance doors to an apartment? Each of us has our own idea of products. But everyone considers reliability, quality and design to be the main qualities. You can secure your apartment from intruders with additional actions: carry out, arm the apartment and install. These are additional costs that can be avoided. However, there are nuances that affect reliability. It is heat and burglary resistant. For selection best product We conducted a market analysis and compiled a rating of apartment entrance doors and consumer reviews to help make the right decision.

The first thing you should pay attention to is the material used to make the doors. Wood or metal is most often used in production. Let's look at the features of each. High-quality wooden entrance doors to an apartment are expensive. They are quite reliable, and it is precisely such products that create prestige for their owners. Not every wood is suitable for making a high-quality structure. Better to use:

ash;
mahogany and ebony.

Products made from other types of wood are significantly inferior in strength and performance characteristics. In this case, it is better to purchase doors made of metal. The price category is different. We will tell you further how not to get confused and know what to look for when choosing.

Main technical parameters of entrance doors

The front door must meet two criteria - reliability and security. Therefore, when choosing, it is important to consider the thickness of the base and outer sheet. It is important that the structure has stiffening ribs. It would seem that the higher these parameters, the better. Excess weight will lead to wear on the hinges due to rapid inertia when opening.

Let's consider the main characteristics of metal entrance doors to an apartment in more detail.

Sheet thickness

Not every metal is suitable for entrance doors. Medium-carbon and medium-alloy alloys are considered optimal. You can check the sheet thickness in the technical data sheet, but you should know the basic classification:

The optimal weight of the product should be within 70 kg. Structures weighing about 100 kg are installed in cans.

Canvas design

The canvas consists of a frame rectangular shape with two steel sheets. Manufacturers sometimes replace the inner panel with MDF or veneer. If, you should choose a completely metal structure, since temperature changes and humidity will quickly lead to wooden panel into disrepair.

It is mandatory to install steel casing and vestibules that will hide all areas and protect the premises from unauthorized entry.

Stiffening ribs are installed between the sheets. The minimum set is 2 vertical and 1 horizontal. As their number increases, the reliability and weight of the structure increases.

Locks

When selecting a product, it must meet the following criteria:

The quality of the lock must match the door. A model assembled from cheap materials will not protect even the most expensive structure from hacking. And, conversely, it is useless to install a premium lock on Chinese products;
The front door requires a mortise lock; overhead models are not suitable. A latch is required;
Manufacturers install 2 locks. This is necessary to protect against burglary, because opening two locks for a burglar is much more difficult and takes longer. There is another reason - reinsurance. If one breaks down, you can use the second lock during repairs;
locks must be selected from different designs. It is recommended to install a lever and cylinder lock.

You should choose a lock only from reliable manufacturers. They guarantee high quality and reliability of the models.

Hinges and trims

For urban conditions or private houses, installing 2-3 loops is sufficient. They must be supplemented with ball bearings. This increases their service life. Elements can be hidden or external, which are attached to the stand and canvas by welding. External loops spoil the appearance of the product, and they can be easily cut off. Hidden ones are much more reliable. However, they have their drawbacks:

the price of the door increases;
the hinges are hidden in special grooves, this reduces the opening of the structure;
smaller opening angle.

The hinges are closed with a platband, which makes it difficult to break the door.

Design

The main thing when choosing is the design of the canvas. The finish must be practical, resistant to mechanical damage and weather conditions. This is especially important for private houses and cottages. Vandal-proof powder coating meets these requirements.

The inner fabric should fit harmoniously into. Manufacturers offer designs with removable internal panels that can be changed if necessary.

How to choose the right entrance door to your apartment

Many manufacturers are engaged in the manufacture of structures. How not to get confused and choose the best steel entrance doors for an apartment in terms of price-quality ratio? We have compiled several rules that will make it easy to navigate this market segment:

The base should be made of high-strength steel, sheet thickness 2-3 mm. In addition to reliability and durability, it has additional noise and heat insulation.
Finishing can be made of MDF, powder coating, wood.
When choosing, you should know in which direction the door will open and the location of the handle.
Moisture and moisture criteria.
You should pay attention to what materials the heat and sound insulation is made of.
Addition of locks to the design, degree of burglary resistance.
Door fittings: hinges, chains must be of good quality, otherwise they will quickly fail.
When choosing a product, it is important to choose a model famous manufacturers. They will provide a long warranty period not only for the canvas, but also for the accessories.
Installation should only be entrusted to professionals.

Additional functions of entrance doors

A high-quality door must not only meet the requirements of reliability and safety, but also fulfill additional functions. For city apartments, it is important that outside sounds and smells from the entrance do not penetrate into the room. Therefore, you should pay attention to these parameters.

Metal entrance doors to an apartment with sound insulation

Sound and heat insulation of the entrance door is made with mineral wool, polyurethane foam or polystyrene foam. In addition, they will protect the room from external sounds. According to professionals, the best design is one filled with polyurethane foam. In addition, to ensure sound insulation, it is necessary to maintain a tight seal between the canvas and the frame. To do this you need to install 2 circuits sealing gum along the perimeter of the frame. You can, if necessary, check with the seller about how to add an additional metal entrance door to the apartment.

Another important parameter– door thickness. It must be at least 60 ml, then the product will meet all the required characteristics.

Entrance metal doors to an apartment with a mirror

Entrance door designers have developed a completely new model with a mirror panel. In addition to the fact that it is convenient to have a full-length mirror, it does not take up space and visually increases the space. Such products can be divided into several types:

with mirror panel, which is attached using a special adhesive composition;
with built-in mirror – mirror surface partially covers the panel.

You should know this! The only drawback of the designs is the inability to install a peephole. If necessary, a video peephole can serve as an alternative.

Rating of steel entrance doors to apartments and customer reviews

You cannot skimp on the safety of your home. The front door must fully meet all the requirements of modern life. To better navigate the models, we have compiled a rating of the best manufacturers of 2017-2018. in different price segments.

Manufacturer: Forpost

The products first entered the market more than 17 years ago. In addition to manufacturing steel entrance doors to apartments, they produce locks. The product is in great demand thanks to high quality and reasonable price.

The manufacturer offers 3 types of designs:

standard− designed for installation in apartment buildings;
reinforced− recommended for private houses;
construction– for installation during the construction of houses or.

Installed on all models hidden hinges, which increases their safety.

Advice! If you need to remove elements, you should contact the manufacturer directly or a service center.

As proof of the above, here is a consumer review of Forpost products.

xumuk032 Russia, Bryansk, door “Forpost” 228: Advantages: durable coating, good insulation, looks decent.
Disadvantages: the keys to different locks are almost the same in shape and color.
This is a steel door with a thickness of metal on outside 1.5 mm. The inside is also metal, but a little thinner. Filling: polyurethane foam. And also a bunch of locks.
The outer side is made of steel 1.5 mm thick with weather-resistant coating. That is, this one is suitable for installation directly on the street. The interior of the canvas and the box is coated with polymer. Which is also very successful, because... when installed between the street and a heated room, there will be condensation, and polymer coating is not harmful, unlike MDF....
More details on Otzovik: http://otzovik.com/review_2983317.html.

S-128

128S

A-37

Manufacturer: Torex

The company has been producing metal structures for over 25 years. The product range can be divided into 3 categories:

for private houses. Expanded polystyrene is used as insulation. You can also choose doors with a thermal break, this will help save heat;
for apartments in high-rise buildings;
fire protection They are able to hold open fire until 6 o'clock. In addition, they are equipped with an “Anti-panic” mechanism, with which the doors can be opened from the inside.

Here is one of the many reviews about the models:

Hela, Russia, metal entrance door “Torex”: Advantages: no noise or smell.
Disadvantages: none.
We bought the entrance door to the apartment with sound insulation from Torex. These products are not very cheap, but quite high quality. The door cost us 24,000 rubles. It has 2 locks, 1 latch. There is a peephole. True, we ordered a metal curtain for it. I like the door hardware. Everything works quite reliably, and it looks normal...
More details on Otzovik: http://otzovik.com/review_1405347.html.

Manufacturer: Elbor

The history of the Elbor manufacturer begins in the 70s of the last century. The following series of doors are currently produced:

luxury;
premium;
Standard products;
Optimum with a minimum set of functions;
economy class.

High quality sets the product apart from the market of similar products.

Manufacturer: Guardian

The manufacturer first began production in 1994. The products are highly expensive, which is not surprising. It has received the highest awards for quality and durability. The products have a fire safety certificate. Currently, the market offers products of different designs in a wide price range, but if funds allow, you should choose the premium class. On the manufacturer's website you can see photos of entrance doors in different price ranges.

Manufacturer: Condor

This manufacturer produces doors in a good price-quality ratio. Mineral wool is used for thermal insulation. The design is resistant to external influences, the canvas is painted with a special varnish composition. Doors can be installed. No obvious shortcomings were identified, and therefore it is worth paying attention to the product when choosing.

Manufacturer "Stal"

Metal doors from the manufacturer "Stal" are similar to those produced by the Elbor plant. The only difference is model range. The manufacturer does not produce premium models; the main production is designed for the average consumer. The products are made from sheets with a sheet thickness of 2 mm; a profile of complex design is used, which increases the strength of the doors.

Modern entrance doors must meet a number of requirements. Firstly, they must be reliable, secondly, beautiful and, thirdly, easy to use. Steel doors are produced today by the most different manufacturers. When choosing, you should definitely pay attention to the brand. Cheap models manufactured by little-known companies are an obstacle to uninvited guests They are unlikely to.

What to consider when purchasing

Choosing the most suitable model doors, first of all, you should pay attention to:

thickness steel sheet, used for manufacturing;
fabric design;
type of insulation;
design and number of locks;
presence/absence of platbands;
number and design of loops;
a type of eye;
appearance of the outer and inner panels;
manufacturer's brand;
price.

Of course, you should choose an entrance door depending on its future purpose. For the dacha, first and subsequent floors apartment building choose models that are slightly different in design.

What should the thickness be?

Good metal doors that reliably protect interior spaces from penetration using brute force, made of steel with a thickness of at least 1.5 mm. Imported designs with this indicator are considered to be of the highest quality.

They are made of alloy steel, which bends when impacted without breaking. Models made of hard metal should have a thickness of at least 2–4 mm. Products of this type are most often made by Russian manufacturers.

In addition to thickness, when choosing a door, you should pay attention to the door leaf and frame themselves. The first must be made from one single sheet. Availability welds in canvas is not allowed, since such a structure can be easily broken using a regular sledgehammer.

It is best if the frame is made of solid strips of steel. Its prefabricated versions are less reliable. Only welded frames filled with cement mortar from the inside earned quite good reviews from consumers.

What should the canvas design be?

The front door leaf itself must be insulated. In this case, it is best if mineral wool or polystyrene foam is used as an insulator. In cheap models instead of these modern insulation materials Often just corrugated cardboard is used. Of course, the microclimate in an apartment or house with such a fabric is unlikely to be good. Cardboard does not retain heat or various kinds extraneous noises.

It is quite difficult to determine how good a metal entrance door is in this regard. Navigate in in this case should primarily refer to the manufacturer's brand. It is better to buy models that have already earned good reviews from consumers. As a last resort, you can also ask the seller to unscrew one of the locks and look inside the canvas. Also, to check the quality of the door in terms of insulation and sound insulation, buyers sometimes simply knock on it. A good model does not “buzz”.

What should locks be like?

Breaking into metal entrance doors is done, for the most part, not with the use of brute force, but “in a cunning way.” That is, using a master key and other similar devices. Therefore, when choosing locks, you should pay attention to the quality Special attention. Only door designs have earned good reviews from consumers, equipped with at least two locks. In this case, one of them must be cylindrical, and the other - level.

You also need to look at how many bolts are in the locks. In good models there should be at least 4 of them. Judging by the reviews of experts, locks can be considered reliable only if the overhang and thickness of the bolts are at least 20 mm.

Hinges and trims

The number of hinges is determined primarily by the weight and intensity of use of the door. For a model intended for installation in a city apartment or residential building, 2-3 pieces will be enough. The design of the hinges is required ball joints must fit. These elements significantly increase their wear resistance. Without them, the canvas will soon simply sag.

And, of course, the hinges must be hidden by platbands. Without it, breaking the door becomes very easy. The hinges of models without platbands can be easily cut with a grinder or some other tool. The platband is especially relevant for structures installed in country houses. It is also very good if the door is equipped with hidden hinges and anti-burglary pins.

Appearance

Of course, there must be a peephole cut into the front door leaf. And it will be very good if it is panoramic. As for the appearance of the canvas and frame, in this case the choice depends largely on the taste of the owners of the house or apartment themselves. But of course, it’s worth paying attention to the degree of practicality of the cladding in any case.

The finish should be good enough resist various types of mechanical stress And unfavorable factors environment. This is especially true for doors intended for use in country houses. Models with anti-vandal powder coating earned the best reviews from summer residents.

As for the interior decoration, it, of course, should fit as harmoniously as possible into the interior of the hallway. Today, there are door designs with removable internal panels on sale. The finish of these models can be changed.

Manufacturer's brand

This parameter is considered perhaps the most important when choosing an entrance door. Under no circumstances should you buy, for example, cheap Chinese-made doors. Such models are usually made of very low-quality and thin steel.

The thickness of the metal of the leaf and frame in most cases does not exceed 0.6 mm. For comparison: regular tin cans have approximately the same thickness. That is, you can open a Chinese-made front door not even with a crowbar or a grinder, but with a simple can opener.

Such models also deserve bad reviews for the very low quality of the insulation. Expanded polystyrene and mineral wool The Chinese practically do not use sheets for insulation. Most often they are insulated completely useless corrugated cardboard. The quality of locks in Chinese models also leaves much to be desired.

The best reviews on the Internet are available about metal entrance door structures made in Russia and Poland. The most popular brands are:

"Guardian";
"Condor";
"Thorex";
"Outpost";
"Elbor";
Galant;
Novak.

Guardian models

Reviews of metal entrance doors of this brand are good, primarily because these models are characterized by increased strength and burglary resistance. The advantages of the designs of this manufacturer also include:

multi-layer keyhole protection;
high-quality powder coating of the canvas;
environmental friendliness of materials used for insulation;
the possibility of individual selection of not only the design and size of the canvas, but also locks, as well as other accessories.

Guardian doors are produced by the Russian company of the same name.

Models "Elbor"

These metal entrance doors have also justifiably earned popularity among domestic consumers. Models of this brand are manufactured at the factories of the Russian holding Elbor. Their main advantages include:

reliability;
easy to change decorative panels;
an ingenious multi-point locking system;
the presence of an additional armor package.

Another advantage of the designs of this brand is the ability to hang the canvas on any side.

Condor models

At not too high a cost, the products of this company are of simply excellent quality. Thermal insulation in these door structures is achieved using mineral wool. The canvas and frames are covered resistant to adverse influences external environment paint coating. For those who want to purchase quality door for your home and not overpay, you should definitely pay attention to this option.

Torex models

The metal doors of this Russian brand use not mineral wool as insulation, but expanded polystyrene, which is resistant to moisture. Therefore, Torex models are well suited for installation in country houses.

In some cases, they are installed even in the absence of a vestibule. But experienced summer residents It is still recommended to build the latter. In any doors of the mid-price category locks due to condensation in winter time may freeze. Only very expensive imported models designed specifically for country houses are free from this drawback.

Products of the Forpost company

This company is one of the leading door manufacturers in Russia. The main advantage of Forpost brand models, in addition to reliability, strength and durability, is the presence of hidden hinges. It is very difficult to cut such a canvas from a frame. Also, the models of this manufacturer have earned good reviews for their attractive appearance. “Forpost” products look really beautiful and fit well into the interior of almost any hallway.

Polish Galant models

This manufacturer also uses reliable armor plates to protect locks from burglary. The undoubted advantages of doors of this brand, among other things, include impeccable solid appearance and not too much high cost. The porch of the Galant models is equipped with additional protection, and the threshold is made of stainless steel.

Novak products

The advantages of doors of this type, about which there is also a lot positive feedback, first of all, include the high reliability of the canvas and the availability additional protection porch. Besides, popularity of Polish models "Novak" deserved thanks to the presentable design of the canvas and frame. They cost not much more than Chinese ones, but their quality is quite good.

Many people do not speak very well of the Saratov Torex doors. But in fact, people have a bad opinion of them mainly because of not very conscientious installers. The doors themselves of this brand are quite good and reliable. Mine has two locks - the main one of the 4th protection class and the additional one of the 2nd. The frame and canvas are quite powerful, and mineral wool is used for insulation. Additionally, the canvas is filled with foamed polyurethane. Therefore, it practically does not allow cold, as well as extraneous noise, to pass through. Overall, a very good door for the price.

Valery Petrovich

We recently installed a Russian “Forpost” door in our house. So far we are pleased with its quality. Looks beautiful and solid. Our door has a universal lock. Yes, it’s convenient, but I still think this detail is unnecessary. They write on the Internet that some “Forpost” door installers know about the presence of this function and sometimes take the path of crime, breaking into other people’s apartments. Otherwise, we are completely satisfied with the door.

Stanislav Kochetkov

Choosing a new metal door is not an easy task. Nowadays there are a huge number of companies producing doors on the market, different kinds locks, etc. To choose the right door, we will determine what criteria it must meet and what to look for when choosing.

Criteria for choosing a metal door

security functions - the door must withstand not only “smart” hacking by cunning thieves (which is achieved by the complexity of the locks), but also rough physical strength(the door structure must be strong and reliable);
service life - the longer the better. Manufacturers provide warranties for their products. Unfortunately, some doors only have a 1 year warranty.
quality of door filling - such important aspects as heat and sound insulation depend on this indicator;
appearance - in this matter you are limited only by your imagination, but it is still worth paying attention to the fact that the door does not creak, does not knock and is not made of toxic materials.

Doors from which country of origin should I choose?

When choosing a door, the first question is often the choice of country of origin. At the moment we can choose from products made in Russia, China and European countries. Of course, there are both pros and cons everywhere. Doors made in China are cheap, but they protective function leaves much to be desired - they can be installed instead of some kind of wooden, but not iron, door. Doors European manufacturers are slightly more expensive than domestic ones. They also have certain sizes that do not always fit our openings. And if you want to install such a metal door not in an apartment, but in your home, then it is worth considering that the climate of our country and the country of origin may differ significantly. Our Russian ones can easily compete with doors manufactured in European countries. Doors are manufactured using various technologies and are superior to foreign ones in a number of characteristics.

1. Design of the door itself:

the frame must be bent-welded. Check with your consultant to ensure there are no corner frames, profile pipes etc.
rubber around the perimeter of the door, i.e., a seal, it is better to choose a tubular one, and not in the shape of the letter W (these are installed in refrigerators), this will ensure the absence of drafts.
leaf - the door must necessarily consist of two sheets. Whether you choose a solid-bent (1.5mm) or bent-welded (2mm) fabric is up to you, it’s not that important. The filling of the door - preferably mineral wool (slab) - is where sound and heat insulation comes into play.
the presence of stiffeners inside the door - 2-3-5 is enough.

2. Protective functions:

It is advisable to choose a door that comes with 2 locks: , . You can choose Italian manufacturers (Cisa, Mottura) or Russian (Guardian).
hinges can be regular (service life 5-7 years), with bearings (the door will move more smoothly), hidden (will not allow the door to be removed, even if the hinges are cut off; this can also be achieved using anti-removal pins), adjustable hinges (the most durable ).
To prevent the door from bending, you can install T-shaped molding.
pocket for crossbars - even if you knock out part of the wall near the lock, it will not allow you to hammer the crossbars back into the lock. There are also vertical bolts that can be used to lock the door from the bottom and top, but keep in mind that in the event of a fire they often fail and can completely block the door.
Armor plates - you can refuse them without a twinge of conscience - only protect against hooligans.

3. Finish:

it's better if it's outside (especially if you put the door in own house) will powder painting with weatherproof polyester coating. You can install panels, but then you should choose weatherproof ones. Even moisture resistant laminate and veneer will not withstand more than 2-3 years (but for a door in apartment building this is a good option). Preferable - MDF - excellent appearance, good heat and sound insulation characteristics.

The right time to choose a metal door

If you are making repairs and are thinking about installing a door, then it is better to directly install the door not at the very end of the repair, when the finishing touches have already been completed. Pay attention to the weight of the door - reliable and strong door should weigh 80-100 kg.
So, do not rush when choosing a metal door. Set your priorities - what is more important to you - appearance, protection, price? Think about all the little things - even which way your new door will open. And based on your requests, study the models offered by manufacturers. Knowing the main points that were outlined in this article will help you make the purchase enjoyable for both you and your wallet.

Summarizing

So, we have looked at the main criteria that influence the choice of a metal door. Of course, on right choice awareness primarily influences, because knowledgeable person will always find an acceptable option in terms of price/quality ratio in any price segment. , because there will be many more interesting articles on doors, locks, protection methods, and so on. Do not miss!