Round table with a rotating center. Turntable DIY turntable

A rotating table for making confectionery products should always be at hand not only for professional bakers, but also for all those who like to cook for themselves and their loved ones. The rotating surface allows you to significantly simplify the process of decorating cakes. You will no longer have to walk around the baked goods, because it will rotate freely around its axis.

What materials and tools are needed to create a table?

Rotary table IC can be bought in a store, but it is much more convenient to make this product yourself. In progress self-assembly it becomes possible to make an individual drawing, as well as select suitable materials. In addition, the price of such a product will be much cheaper than a purchased one. The item can be made using available materials and tools:

Wood base;
Bearings (2 pcs.);
Liquid nails or self-tapping screws;
Plastic or iron tube;
Metal circle;
Thin sheet of plastic.

As wooden blank you can use any materials. To save money, you can also use a door from an old cabinet. Each of them has certain advantages. For example, wood is more environmentally friendly and safe, and MDF is very easy to work with. Chipboard is attractive material in terms of price.

Assembly stages

How to make a cake turntable? The process of assembling a rotating stand is not particularly difficult, but it requires some physical effort. First you need to prepare necessary materials and make a drawing. Follow a certain sequence of actions:

This is how you make a DIY rotating turntable for a cake. It is necessary to cut two circles from a piece of chipboard or other material. Parameters can be selected by at will. In this example it is 20 cm.
In one of the circles in the center we make a recess in which the bearing will be installed. It is this detail that will give rotation to the entire structure.
By using liquid nails or self-tapping screws, we attach the second element, which does not have a recess, to the first. Due to the second circle, the device will firmly adhere to the surface.
Next, we insert a tube into the bearing that will connect the lower and upper bases. The length of the tube can vary from 15 to 18 cm. This is the most preferred size, neither short nor long.
Stand for confectionery product it is better to make it from a metal circle with a diameter of 30-40 cm. It is attached to the top of the tube using a welding machine.
Plywood or chipboard is placed on a metal surface using self-tapping screws.

ATTENTION! In most cases, not all people have the opportunity to do full welding. In this case, it comes to the rescue cold welding, reminiscent of plasticine in texture.

The nuances of making a rotating cake table

To make the assembly process go smoothly, you need to know some nuances. For example, it is better to take a double pressed bearing. Otherwise, two bearings will be required, and one of them must fit inside the other. One element can be driven into another using nails. It is also necessary to ensure that the plastic tube fits into the bearing as accurately as possible. It is important that there is a strong fixation and that it does not dangle. Otherwise, it will be very difficult to use such a device.

IMPORTANT! The resulting product can be given an attractive appearance. It must be covered with a film or plastic base. This will also extend the life of the device and make it easier to maintain.

The rotating rotating table provides convenient access to the confectionery product from all sides at the same time. You can make such a stand yourself, especially since the materials for its manufacture are available in every home.

A good and useful gift for yourself and for friends!

Chinese style rotating tabletop - in your living room or kitchen

The rotating center of the table is a circle, slightly raised above the surface of the table. The rotation mechanism is hidden at the bottom. Before serving, the rotating center is placed on dinner table or on a serving table.

The rotating center of the Lazy Susan table is great for serving appetizers, sushi and rolls, pies, pizza, sweets:

Rotating Lazy Susan table middles - more details

Round table top made from furniture laminated material Egger chipboard with a neat decorative edge 2 mm thick along the end of the disk (diameter 40, 50, 60, 70 and 80 cm).

2. Fleetwood color- light grayish-beige with wood texture. The surface of "fleetwood" laminated chipboard is pleasant to the touch, creating the feeling of longitudinal fibers of natural wood.

Swivel mechanism metal (ring ball bearing), designed for many years of use as a rotating center for the table.

Soft silicone feet do not spoil the surface of your table and prevent the rotating tabletop from moving from the place where you placed it:

All Lazy Susan models are simple and easy to use. You can remove food stains and spilled liquids from the surface of the countertop with a regular sponge or rag. The only thing that is not allowed is immersion in water and dirt getting into the rotating mechanism.

When stored in a vertical position, the rotating middle takes up very little space (thickness is only 3-4 cm) - you can lean it against the wall or put it in the pantry.

Prices for Lazy Susan swivel table centers and stands:

Product	Price, rub	Production time
Lazy Susan 40 fleetwood. Swivel stand, Fleetwood color. Turntable diameter 40 cm, height 3 cm. Load up to 30 kg, product weight 2.5 kg. \|	2500 2400	3 days
Lazy Susan 40 white. Swivel stand, matte white. Turntable diameter 40 cm, height 3 cm. Load up to 30 kg, product weight 2.5 kg. \|	2800	3 days
Lazy Susan 50 fleetwood. Swivel table center, Fleetwood color. Turntable diameter 50 cm, height 3 cm. Load up to 30 kg, product weight 3 kg. \|	3000 2900	3 days
Lazy Susan 50white. Rotating table center, matt white. Turntable diameter 50 cm, height 3 cm. Load up to 30 kg, product weight 3 kg. \|	3300	3 days
Lazy Susan 60 fleetwood. Rotating center of the table, Fleetwood color. Turning circle diameter 60 cm, height 3 cm. Load capacity up to 50 kg, product weight 4 kg. \|	3500 3400	3 days
Lazy Susan 60 white. Rotating table center, matt white. Turning circle diameter 60 cm, height 3 cm. Load up to 50 kg, product weight 4 kg. \|	3800	3 days
Lazy Susan 70 white. Rotating table center, matt white. Turning circle diameter 70 cm, height 3 cm. Load up to 50 kg, product weight 5 kg. \|	4600	Temporarily absent
Lazy Susan 80 white. Rotating table center on round base. Turntable diameter 80 cm, height 4 cm. Load capacity up to 60 kg, product weight 8 kg.	6500	Temporarily absent
Material: Egger chipboard with 2mm edge

In what form are the products delivered to the buyer?

Before shipping, Lazy Susan spinning centers are securely packaged in corrugated cardboard and stretch film to protect them from shock and dampness. The photo shows an example of Lazy Susan 60 packaging.

Find out the cost of delivery to your city, write to us:

Alternative options for you:

I have had a large round table in my living room for many years. Friends and relatives often gather for a festive feast. During the meal, requests arise to pass on this or that dish. This causes unnecessary fuss and certain inconveniences. After looking at a lot of information on the Internet about different models furniture, I decided to make a rotating table with my own hands, the drawings of which I completed myself. Having assembled a simple design, I immediately got rid of the above-mentioned problems. In this article I will tell you how to make a round table with a rotating center with your own hands.

Tabletop project with a rotating center

It was important to me to create a stand in the form of a turntable. Its design should be simple and not cause temporary and financial costs. The main idea is the design of the table plane rotation unit. I used a hinged furniture support. I decided to make a load-bearing plane from two sheets of fiberboard and chipboard. I don't use wood. Before making a table with a rotating center with my own hands, I prepared the tools and materials.

Tools

Having assessed the volume and types of work, I collected tools in accordance with the following list:

jigsaw, which I use to cut circles from fiberboard and chipboard;
I will need an electric drill to drill holes for connecting furniture parts;
screwdriver for fastening screws;
an air compressor with a gun for blowing holes and treated surfaces;
hammer;
iron;
wrench;
improvised tools (pliers, screwdriver, metal ruler, tape measure, knife, pencil).

Materials

To make a round table with a rotating center with my own hands, I selected the materials necessary for this. The list included the following:

fiberboard sheet – 600 x 600 mm;
piece of chipboard – 600 x 600 x 20 mm, selected according to the color of the main tabletop;
roller support;
a piece of timber 50 x 50 x 500 mm;
hardware – 4 screws 6 x 20 mm, two bolts 10 x 30 mm with, one screw 8 x 70 mm washers and nuts;
Whatman paper;
liquid nails – tube (185 g);
end adhesive furniture tape 25 mm wide;
sandpaper.

To make it clearer to the reader how to make a rotating table, I have compiled instructions for assembling this device.

Step-by-step instructions for assembling a rotating table with your own hands

I outline all my actions in points in the following order.

I determine the size of the rotating plane to be 600 mm. Since the diameter of the main table is 1300 mm, the table will not interfere with the plates around it.
I fasten a sheet of whatman paper to the board with pushpins.
Using drawing tools, I draw a 600 mm circle on paper. I carefully cut out the table layout with scissors.
Having attached whatman paper to a sheet of fiberboard, I trace it with a pencil. I use a jigsaw to cut out the lining for the table top.
I perform the same actions with a piece of chipboard.
Using pliers and a screwdriver, I remove the plastic roller from the metal hinge.

In the middle of the block I make side cutouts for a tight installation of the support.
Having installed the hinge strictly in the center of the beam, I drill a hole from the side through the openings in the metal.

I apply the hinge area to the center of the fiberboard and mark the attachment points with a pencil. The hinged support will allow the table to rotate and turn in the desired direction at any time.
In the fiberboard, following the markings, I drill 4 6 mm holes with a drill.
I thread the screws through the holes in the sheet and support. I put washers on the side of the platform and tighten the nuts.

I coat the screw heads with machine oil.
I apply a circle of chipboard so that the outer boundaries of the two circles coincide.
Using the marks obtained, I use a drill to make small indentations in the chipboard. They will allow the screw heads to not interfere with the tight fit of the two parts of the rotating tabletop.
On chipboard surface I apply a layer of liquid nails and connect both parts of the table. Having separated them, I wait 3 minutes. Then I finally connect the parts, loading the top with heavy objects at hand.
I process the side edges of the circles sandpaper.
I place the support beam in the center round table. I make marks at a distance of 30 mm from the edges of the plank.
I drill through the marks through the timber and the table top.
I thread two bolts. At the bottom of the tabletop I secure the bolts with nuts and washers.
I put a hinge with the table top on the fixed support beam. I thread a bolt through a pre-drilled horizontal hole and tighten it with a nut and washer.
I glue the tape along the end of the circle using an iron. I cut off the protruding part of the edge with a knife. The table is ready.

This instruction makes it possible to understand how to make a table with a rotating center with your own hands without much hassle and at minimal cost.

Labor costs and cost of making a table with a rotating center with your own hands

After finishing the work, I was interested in calculating how much it cost to install the rotating table. Money was spent:

Fiberboard (0.5 m2) – 50 rubles;
Chipboard (0.5 m2) – 100 rubles;
liquid nails “Montazh” (tube 185 g) – 160 rubles;
articulated leg for a chair - 70 rubles;
sheet of whatman paper (1 sheet) - 20 rubles.

Total: 400 rub.

I bought sheet material from a furniture workshop as cutting waste. I took a piece of timber, hardware, and adhesive furniture tape from my supplies.

As for labor costs, the work took me no more than 8 hours.

DIY rotating table

After I made a rotating table with my own hands, I came across drawings of more simple project manufacturing a rotating table. You can use a hinged support with a vertical axis instead of a platform. This should be done as follows:

a hole is drilled in the center of the round table,
insert an axle with a plastic insert into it.

The table is assembled and attached to the rotating support in the same way as described above. What is attractive about this method of creating a round table with a rotating middle with your own hands? Because the table can be removed at any time, and the hole in the center of the table can be closed with a plastic plug.

Rotating table

I built myself a rotating table. Suitable for decorating cakes and for modeling (including doll heads). I molded it, as they say, from what I had. But it spins perfectly (no cake yet), even if you play in the Field of Miracles or open a casino! :)

What I needed:

1) stand for hot dishes (round rug with a ball pattern - bought on sale in the Metro store for 3 UAH), diameter 38 cm;

2) a piece of fiberboard (we cut out a circle from it with a diameter 1 cm smaller than the hot stand -37 cm);

3) a furniture wheel on bearings and fastened with a screw and nut (to make disassembly easier) - I bought it on the market for 12 UAH;

4) 4 screws, 4 nuts, 4 washers (take the wheel with you to the store and select the length of the screw according to it, so that its length does not interfere with the free rotation of the table, and also keep in mind that it must be recessed in the fiberboard and not protrude above the surface of the table , so the cap should be flat);

5) 4 self-tapping screws, 5-6 cm long;

7) drill and self-tapping drill bit and drill bit large diameter to deepen the hole for recessing the screw head;

8) a block of wood about 60 cm long (I don’t know the exact size, it’s better to choose one for a specific wheel so that it is a little wider than the distance between the wings of the base of the wheel (so that it fits tightly)

9) sandpaper to clean the edges of the fiberboard;

10) screw and wing nut, size 6, suitable length (5-6 cm);

11) glue "Dragon"

First of all, you need to cut a circle out of fiberboard required diameter. Make 4 holes from the center (attaching the base of the wheel). The edges of the fiberboard need to be sanded and covered with tape.

Then we put the base of the wheel on a piece of timber (sharpen it a little so that it fits perfectly), mark and drill a hole for the mount.

We attach the base of the wheel to our table top.

TO wooden block We attach additional parts made of timber (so that the table is stable), fasten it with self-tapping screws.

We connect the top part with the base and fasten it.

Apply "Dragon" glue in a spiral pattern to the tabletop from the edges to the center. We apply our mat - a hot stand and separate it again, wait a couple of minutes for the glue to thicken and apply it to the tabletop again. Turn the table over with the table top down and, gently pressing, iron the table top with your hand. reverse side so that the glue adheres well.

All is ready!

If you wish, you can somehow decorate the table leg - paint, decoupage, etc.

A festive cake is the decoration of any celebration. When serving it, not only the beauty of the creamy decoration of the dessert is important, but also the place where this work of culinary art is located. Even the most delicious cake can be ruined by a simple... cardboard box or plastic tray. The assortment of stores offers a wide variety of cake stands, but it is quite possible to make them yourself using a minimum amount of consumables.

Basic option

TO basic version This could include a single-tier cake stand. It’s easy to make it yourself; this work will take no more than 15 minutes. To do this, you need to take a piece of polystyrene foam, which you can purchase at a hardware store.

Expanded polystyrene the desired shape connected to a special food substrate, which is a thin cardboard with a foil coating on one side. Such a substrate should have round shape. Its diameter should correspond to the size of the confectionery product that will be created. Connect the substrate to polystyrene foam using double-sided tape.

If you can’t buy a store-bought backing, you can make it yourself. To do this you will need thick cardboard and scissors.

To make a round substrate:

cut out of cardboard the most perfectly even circle;
connect with polystyrene foam as indicated above;
Using a sharp knife, carefully trim the polystyrene foam that extends beyond the edges of the backing.

After all the manipulations, you get a round cake stand. To prevent the edges from being rough, it is better to trim them with sandpaper and then tie them with a satin ribbon. Double-sided tape is used to secure the tape.

When using a homemade cardboard base, the surface in contact with the food must be covered. A hot tablecloth or adhesive glossy paper that can be washed may be suitable for this purpose.

Thanks to the materials used to create this stand, the product does not deform, since it is quite solid and will reliably hold even a heavy cake.

How to make a rotating base?

Making wedding stands, like the wedding cakes themselves, is much more complex. standard options. As a rule, such cakes are multi-tiered, and, accordingly, the main load falls on the dessert stand. It is this design that provides the necessary festive look and securely holds the cake on all tiers.

Rotating stand for wedding cake will perform several important functions:

the base is a base that will retain its shape when the product is moved or transported;
serve as a beautiful decoration;
will save space when placing the cake in several tiers.

The rotating multi-tiered structure must be strong and reliably hold the sweet burden placed on it, therefore the materials for making such a stand must be durable.

You can make stands from wood and metal. To work, you also need to take a metal pipe and a double bearing.

Should be carved from wood smooth circles the required diameter. If the stand is three-tiered, then wooden circles 6 pieces needed. Most often, the upper tiers of the structure are made smaller in diameter than the lower circles.

The design and size of the stands are made taking into account taste preferences.

Cutting circles for a stand out of wood yourself is feasible, but labor-intensive. If you don’t want to spend time on this, then you can use the services of professionals. In many large furniture stores there is such a service.

It is worth checking its availability in advance and ordering such work. Thanks to the services of professionals, the parts will turn out very smooth, without chips or defects. In addition, completing such work will not take much time and will allow you to deal with other wedding chores.

After cutting out the parts, the two circles are connected to each other, and a slot for the bearing is made in one part of the circle. It is best to connect wooden parts with liquid nails.

The same actions must be carried out with the next two parts of the stand. In this case, a slot must be made for metal pipe, which will serve as a leg between the lower and upper tier. For greater reliability of the stand under the upper tier wooden parts make a metal part identical in diameter. With the help of this metal circle, the product will not only be stronger, but also easier to manufacture, since it is much easier to weld a metal pipe to metal part rather than connecting to a tree.

Since not everyone has welding skills, it is better to use the so-called liquid welding, that is, a special product resembling glue designed for metal.

The base is ready. Its rotation is ensured by a bearing, and wooden coasters on a metal base ensure the reliability of the product. All that remains is to design the appearance of the structure. It should be festive and stylish, while all materials and fastenings must be masked.

The best option for this purpose is thin plastic, which can be replaced with Oracal adhesive paper. Although paper is not as durable as plastic or as presentable, it is in this case will cope with the main task quite well.

You can also decorate such a stand with mastic. Since this part will be edible, it should not be used with strong dyes. Such decorations are very often used on wedding celebrations, children and adults will be happy to try them.

Materials used

In addition to the above materials, there is also a large number of possible options.

Stands can be made:

from plywood;
from fiberboard;
from foam plastic;
made of cardboard folded together in two or three layers.

In addition, you can use old, unnecessary things. There is a review on the Internet about how a cake stand was made from old wooden doors and a metal pipe from an old vacuum cleaner.

To make your own cake stand, It’s worth showing a little imagination and finding everything you need for work even at home.

Various materials cover the surface of the product. Since food products should under no circumstances come into contact with building materials, That finished surfaces should be covered in mandatory. Suitable for this:

foil;
cling film;
decorative paper;
tablecloth;
sticky paper and the like.

We should not forget about decorative processing stands. In this case it would be appropriate satin ribbons, sparkles, corrugated paper and other decorative elements. The stands can also be painted. For decoration it is better to use pink, blue or White color paints. The main thing is to get a harmonious composition with the cake.

You need to remember about the safety of the product. If wooden skewers are used, they must be covered with cling film or plastic straw for cocktails, as the wood may be chipped.

The finished stand must be perfectly clean and safe for use, because children are rightfully considered the main lovers of sweets at all celebrations.

Beautiful examples

Our photo gallery shows interesting examples ready-made structures for cakes: