Lighting plays a very important role in any room, so you need to pay attention to choosing a ceiling chandelier Special attention. A well-chosen lamp will help create a space special atmosphere warmth and comfort, and will also provide enough light so that your vision does not deteriorate.
Modern designers offer huge selection all kinds of chandelier models. They differ from each other in color, texture, size and material. Quite popular today lighting in the form of a wheel from a cart, spinning wheel, bicycle and other similar structures.
Peculiarities
The circle, the wheel have always had a special sacred meaning. People associated the circle with the sun, which gives life to everything on earth. The peoples of India, Mesopotamia and Byzantium compared the spokes of a wheel with rays heavenly body. In almost all religious teachings there is a symbol of a circle, meaning the continuity of the cycle of life and new rebirths.
The Slavs have always considered the circle to be the strongest amulet. However, even if people do not know about the real meaning of such geometric figure, they subconsciously feel an interest in the circle in one way or another. It represents integrity and constancy.
Advantages of round structures
A wheel-shaped chandelier has many practical advantages. Let's look at some of them:
- Lighting round shape capable of creating diffused light. This results in uniform lighting that affects the entire space, even its most remote corners.
- With the help of a “wheel” chandelier it is easy to completely illuminate fairly spacious rooms. Modern stores offer a wide range of designs different sizes. With their help, you can easily provide enough light to even a very large space.
- If you install one or more round ceiling chandeliers, then you can easily create the necessary accents with the help of light. In a similar way, it will also be possible to divide the space into several separate zones.
One of the most important features of such products is presentable appearance. A stylish and luxurious wheel-shaped chandelier will fit perfectly into absolutely any interior. At the same time, it will certainly add luxury and originality to the atmosphere. If you like stylish and unusual things, be sure to take a closer look at this product.
What materials are they made from?
Today, manufacturers have a variety of various materials to create lamps. Models made of metal, bronze, silver, cast iron or even reinforcement are common. They are effectively complemented with decorations made of transparent or colored glass, gilding, rhinestones, crystal pendants and balls.
However, for many decades the most popular round chandeliers wooden models remain.
Let's consider the main advantages of this material:
- Environmental friendliness. Since real wood is a natural material, it is absolutely safe for environment and human health. The same cannot be said, for example, about some types of plastic. If you care about surrounding nature, then you will certainly make your choice in favor of this option.
- Aesthetic appearance. It is the chandeliers from wooden wheel look most impressive and beautiful in the interior. Unique texture and color natural material make the design very beautiful and unique.
- Long service life. It is estimated in tens of years. If you once buy such a lamp, you will not have to replace it soon.
What rooms are they suitable for?
Similar design solutions will be a great addition to any interior. They will fit well into a decor in the style of classic and avant-garde, loft and country. By the way, wheel-shaped chandeliers are successfully used not only for city apartments and country houses.
Very often they become decorations and functional devices for cafes, bars and restaurants. Owners of establishments with a medieval theme will especially appreciate such products.
However, the interior does not have to be classic or aged. For modern stylish premises A wheel chandelier works great too. It emphasizes the originality of the interior and the originality of the owner of the house or establishment.
If you want to add a special touch to your space, be sure to take a closer look at these lighting fixtures.
Of course, you should still take into account the style of the room. Try to understand which lamp is best suited in a particular case. If you have any difficulties with the choice, you can contact professional designers. They will be able to choose exactly what seems ideal to you.
Some specific examples
No wonder they say: it is better to see once than to hear a hundred times. Therefore it is worth considering several illustrative examples placement of the “wheel” chandelier in different rooms.
In the shape of a cart wheel with candle lights
This option ceiling lamp is an example classic chandeliers of such a type. The base is a large wooden wheel. The spokes on it are made of metal with elegant forging.
The entire structure is attached to the ceiling using several massive metal chains. This adds special charm and originality to the chandelier.
And the design is completed with modern light bulbs that resemble real ones. wax candles. This chandelier will be a great addition to the interior of a hunting lodge. At the same time, it will provide enough light for the entire room.
Laconic pendant lamp with round incandescent lamps
This is another example of a successful design solution.
A large wooden wheel is the main element of the design. This model has nothing superfluous: a strong round base and chains for attaching the chandelier to the ceiling. The lamp has six symmetrically arranged round bulbs that provide soft, warm light.
Thanks to such a lamp, the room will instantly become more comfortable and complete.
When decorating the interior of a room, designers do not deviate from using wooden items and finishing elements. These styles include the well-known: loft, Scandinavian, Russian rustic, French Provence, American country, national, among which the most popular are Japanese and Chinese.
- Features of lighting fixtures
- Advantages of designs
- Caution in operation
- Creating a wheel lamp
- Video instruction
- Product functionality
Features of lighting fixtures
A wooden chandelier can become not only a part stylish decoration room, but also transform it, bring desired shade rough antique simplicity or graceful elegance, create an atmosphere of courageous Middle Ages or Japanese severity.
A DIY chandelier made of wood can be for loved ones an original gift filled with warmth of feelings and positive energy. In addition, it will be exclusive and unique, since it can be made in a single copy.
Advantages of designs
Wood products, including chandeliers, have a number of positive qualities, inherent in all objects from natural materials:
- The environmental friendliness of the product, the absence of harmful emissions are important factors if desired, create comfortable room, in which you can conduct healthy image life.
- Wood is a material that can be easily processed, from which you can make products that are unusual in beauty, elaborate, with graceful lines, or suitable in style, simple and practical lamps.
- The versatility of using wood structures allows you to use it both independently and in combination with contrasting materials: metal, textiles, forged elements, glass, leather, allowing you to create chandeliers that are unlike each other with different properties.
Caution in operation
- The hygroscopicity of wooden appliances leads to changes in shape and cracking of the surface when exposed to a humid environment. Therefore, it is not recommended to install wooden chandeliers in damp rooms, with high humidity, for example, bathrooms, basements.
- The flammability and fire hazard of wooden lamps makes it necessary to provide additional safety measures against fire.
How to create a chandelier from wood
They should not be placed near stoves, chimneys, or near open fire, for example, near fireplaces, in the area of sparks. The design of the chandelier must have reinforced insulation in the places where lampshades, sockets, and incandescent lamps are attached.
- It is advisable to install fluorescent, halogen, LED bulbs with reduced heat generation.
- To protect against damage by insects that can spoil and destroy wood, its surface should be coated with special antiseptics.
Despite the fact that the production of each product is individual and depends on the imagination and abilities of the craftsman, there are several standard models that are often used for installation in the country house, kitchen, or living room. They are quite simple to manufacture, do not require large material costs, and have original look, combined with different styles interior
Creating a wheel lamp
This chandelier is made in the shape of a cart wheel. Currently, it is difficult to find a finished wheel suitable in size and quality, therefore, you can cut out the desired design, as can be seen in the photo from two panels square shape with sides 1 m long, 40 mm thick.
Wooden balusters are easy to make yourself or purchase in a retail chain. Depending on the style of the interior, it is better to process the edges and surfaces carefully, or deliberately carelessly, as if cutting out with an ax.
Carefully, strictly according to the diameter of the lamp socket, drill the corresponding holes. The connection of lamps can be prudently divided into groups: evenly (4 + 4) or practical (2 + 6, 3 + 5).
The assembled structure should be treated with varnish in 2 - 3 layers. Its shade is selected in accordance with the rest of the interior items. It is advisable to use LED or halogen lamps that do not cause excessive heating of the wood.
It is advisable to hang it in this way: directly to the ceiling, at different levels using metal chains, forged fasteners, with adjustable height.
Video instruction:
Product functionality
You can keep yourself and your children busy on weekends and show your creative imagination by creating simple lamp designs. Thus, ensuring a pleasant pastime for all family members, developing the handicraft skills of the younger ones, you can make a useful and practical souvenir for your grandmother or an extraordinary piece of decoration for your country room with your own hands.
Wooden chandeliers made with your own hands are an option creative approach to decorating the room. With this product you can achieve unusual decoration room that does not require material costs. Pleasant lighting and positive energy will be able to create a sincere and homely, or stylish and original atmosphere for many years.
Read also: DIY lampshades for chandeliers, Which lamps are best for suspended ceilings, Which chandelier is suitable for suspended ceilings, Chandeliers for the bedroom: Photo
The theme of chandeliers is endless and vast. We have already confirmed this more than once with our own examples, citing possible options on our website. However, there are never too many options. After all, each of us has our own morals. Tastes, preferences and goals. Yes, yes, goals also play an important role in choosing and making a chandelier, because in some places you need elegance and charm, in the form of crystal playing in the light, but in others you simply cannot do without the rustic. Everything is according to the theme and application of the chandelier for each specific room. So we believe that for a bar, a large living room with a fireplace, or even a gazebo or an open terrace, you cannot do without a chandelier. With one of the best chandeliers for such places, there will be an ordinary cart wheel, decorated to match this very chandelier. That is, it’s kind of like in a bar in the old west, when candles were placed around the perimeter of the wheel, and the wheel itself was suspended from the ceiling. This is exactly the option we will consider today.
What you need for the “Cartwheel” chandelier
For production work you will need a board 80*40*300, planed. Wood block 20*40*300. PVA glue. You will also need screws, wires, wire, lamp sockets, stain and a brush. You can raise the chandelier using a chain, which should also be included in the budget for your event.
How to make a cartwheel chandelier
Perhaps one of the main and important things is to mark it correctly wooden blanks, which will become the basis for the frame of our chandelier and thus the decorative wheel. In our case, we make the markings into 8 parts, and we also divide the wheel into sectors into 8 parts, that is, the angle will be 45 degrees. It is at this angle that the spokes will be located among themselves. And if we translate this into an angle for the bars, it will be (180-45)/2=67.5 degrees.
We apply the bars and make cuts along the marked lines. We drill the resulting bars on both sides, while inserting a dowel on one side. There is an empty hole on the other side. As a result, the bars should fit into one another, like chain links one after another. Thus closing the circle.
This is exactly what we do next. We apply PVA glue to the mating surfaces and ultimately fasten everything with strap tape. The tape will hold and tighten the structure until the glue dries.
It is advisable to use flat surfaces at the top and bottom to prevent the wheel from moving to the side. In our case, plywood and stones of significant mass were used. We wait 12 hours.
Then let's see what happened.
We cut out the central octagon to which the wheel spokes will be attached. We also drill a hole for the dowels and string the knitting needles onto them using glue.
The end result should be something like this.
But we fasten the spokes around the perimeter of the wheel using self-tapping screws.
Wheel chandeliers
To make the wheel look like a wheel and not an 8-sided one, we cut it down and grind it along the entire perimeter and according to the radius.
To make all procedures easier to carry out, including subsequent painting, you can build a simple device.
Now we move on to communications on the chandelier, that is, to the installation of wiring and lamp sockets. In this case, we use ordinary copper wire and mounting brackets for it.
All that remains is to hang the chandelier on a chain, screw in the lamps, definitely lampshades in the shape of fire. 5 chains are used as suspension. One in the center and 4 to the sides.
That's all, the chandelier is ready and now pleases with its unique charm and, of course, the much-needed light in in the right place. You can see other options for making chandeliers in the article “DIY Chandelier”.
P.S. Subsequently, the author made another chandelier, but with a change. So, in particular, he began to make dowels on both sides of the knitting needle. It was more convenient this way and all the spokes fit tightly into place. The design is more rigid even without self-tapping screws.
It seems to me that in many village yards you can find an old wheel from a cart to which horses were harnessed. This, in terms of homemade products, is enough interesting material, which can be easily used in the interior garden plot. Or you can, as in the example of the author, use it to make a chandelier in a rustic style.
To work you need:
the wheel itself, varnish or impregnation, blocks for connecting wires, sockets, lamps, cable, screwdriver and drills different types, pliers, wire cutters and screwdriver.
Take the cart wheel. Even if it is not very well preserved, it will give finished product a certain charm. We clean it of any debris, sand it with sandpaper and cover it with wood impregnation and then varnish.
Small holes are drilled out through holes, into which hooks will be inserted, by which the chandelier will be suspended from the ceiling. You can buy them ready-made or make them yourself from wire; there’s nothing complicated about it. The hooks are located along the rim of the wheel, every 120 degrees.
All metal parts are painted with any paint suitable for color scheme to the interior of the room in which the chandelier will be located. The chain on which the product will hang is also painted. You can simply dip it in a can of paint and hang it over it to let the excess drip off.
Now the cartridges are mounted. The author decided to hang five of them on the wheel. A large lamp will be placed on the central axis. The remaining four holes need to be drilled. Taken feather drill and drill holes in the wheel rim. They house light bulb sockets. The holes must be through, since the wires from the cartridges will be located on the top of the wheel rim. The lamps will be located at the bottom. The author made the holes for the cartridge end-to-end, so there is no need to secure them with anything, although you can secure them to be on the safe side.
For the convenience of connecting all wires to each other, the author in side part I screwed the bushings into the soldering blocks, through which the connection will be made. We leave a small piece of wire to connect the chandelier to the network.
Now the chandelier can be hung.
The work took 2 hours. In the end it turned out interesting thing, which will both decorate your room and illuminate it.
Creative success and the implementation of all your ideas!
There's a century outside the window innovative technologies, but antique decors and styles that tend to be ethnic are still widespread. Most often they are used to decorate themed cafes, restaurants, hotels and other similar establishments. Individual items (large beams made of natural wood, horseshoes, cart wheels, etc.) decorate apartments and country houses. To decorate the room in an unusual way, in the center of the room you can place a chandelier in the shape of a wheel. Such a lamp will attract the attention of everyone who comes into your home.
Unusual lamp
In ancient times, carts and carriages were the main means of transportation. Today they are practically not used, but individual elements used in decoration. If you really want to transform your interior... unique lamp, the best choice is a real wooden wheel from an old cart, with which you can make beautiful chandelier. This way you will receive an item with its own history. This chandelier will be truly unique.
If it is not possible to find a base for a chandelier, you can make it yourself. Wooden product in the shape of a wheel, maximally imitating its appearance, it is not at all necessary to make it in accordance with outdated technologies, because there will be no need to transport people and cargo. In this case, the main thing is maximum visual similarity, and not the functional qualities of the wheel. For production you will need certain materials, tools, equipment.
Country
Decorative country style country music, which originated in America, is widely used to decorate private and country houses. The nature surrounding the building is in perfect harmony with the style. This direction combines ethnic notes, comfort and homely warmth. Its main characteristic is the use of a large amount of wood. A wheel-shaped chandelier is ideal for this style.
For the above style, as well as to decorate the main light source, natural materials are used. Not only wood, but also stone are actively used. Can be used as chandelier decorations forged elements in the form of plants and the like. Warm wood And cold metal in combination they create an expressive and stylish blowing.
Product characteristics
Standard chandelier of the wheel is quite large in size. The diameter of such a product is approximately half a meter. Given these parameters, it is better to place a large lamp in a spacious room. Due to its shape and size, such a lamp will perfectly illuminate a large room decorated in the style of an old castle.
A lamp in the shape of a wooden wheel is perfect for a room with a fireplace. If the room has furniture made of rough wood, minimally processed, a lamp of this type will perfectly complement the interior.
If you make a chandelier yourself, you will receive a unique product, a real work of art. Decor items self made are valued much higher than store and market options.
Having made the lamp yourself, you can be sure that there will not be a second similar product anywhere. You will have the opportunity to install required amount lamps, decorate the item as you wish, turning any creative idea into reality.
Unusual solution
Using several wheels that differ from each other in diameter, you can make a voluminous and spectacular multi-level chandelier. It will become the main decoration of a large hall in a luxurious restaurant. All real cart and wagon wheels are almost the same size. In this case, a natural wheel acts as a base, and two additional element you need to create it yourself.
A special effect can be achieved by placing lamps at different heights (from the base). In this case, the light sources are placed not on the wheel, but under it.
With your own hands
If you want to build an amazing lamp yourself, you need to select certain materials. After this you can start working. You need to learn as much as possible about the workflow.
You will need the following:
- wheel;
- lamps in the form of candle fire, 6 pieces;
- cartridges, 6 pieces (the number of cartridges and lamps must be the same);
- forged parts of various sizes and shapes;
- chains, about 6 meters;
- wire;
- self-tapping screws;
- figured pipe.
Treatment
If you get your hands on a real antique cart wheel, it needs to be processed properly. To do this, you need to walk over the surface with a stiff iron brush. To get the job done as quickly as possible, it is better to use a similar attachment for a drill.
Then you need to cover the wheel with a solution of linseed oil with turpentine. Apply the product in several layers. You can use a product that protects the tree from rotting and various external factors.
If you couldn’t find a real wheel, you can make a replacement from wood and go through all the points listed above.
Number of light sources
On the wheel standard size It is recommended to install 6 lamps. Light sources must be placed at the same distance from each other. You can install lamps according to the number of spokes. To ensure that the lamps do not interfere with the special appearance of the product, it is necessary to purchase light bulbs that imitate candles. They are easy to find in specialized stores.
Holes are made in the wheel - take into account the dimensions of the lamp. Additional blind holes for wires are also needed. Size – approximately 15 to 20 mm. With the help of adapters, the cartridge firmly takes its place in the hole intended for it. When choosing lamps, pay attention not only to their appearance, but also to the power and temperature of the light.
Decoration
You can make the product more beautiful using metal chains. Chains with a thickness of 5 mm are perfect. To emphasize the effect of antiquity, it is recommended to choose a black version.
You can use various forged elements. The main thing is not to overdo it with their quantity, otherwise the weight of the chandelier will increase several times, and it will be quite difficult to attach it to the ceiling. Too a large number of decorations will spoil the appearance of the product.
Metal parts attach using a drill and self-tapping screws. To prevent them from standing out, they can be covered with matte black varnish. All such elements should be treated with special solutions that protect against rust.
Installation
It is better to carry out the installation process of the product together, especially if it is large and heavy. Usually, large chandelier installed in the center of the sheet. If we are talking about decorating a large hall, it is quite possible that two chandeliers will be needed, placed at the same distance from each other. They can be hung closer to the center or on different sides of the room.
Carefully consider the installation process, try to take into account all the nuances. In this case, the result will not disappoint you.
To learn how to make a wheel-shaped chandelier with your own hands, watch this video.
Having become the owners of a small suburban area, we decided to embellish it a little with the help of . They built a retaining wall, made it, broke it, created it - that is, they got down to business with the enthusiasm inherent in beginners. They began to collect antiques: a wooden spinning wheel, a stag, a clay jug. They really wanted to find a cart wheel in the nearest villages, but this task turned out to be the most difficult - all the rarities were bought up by more nimble summer residents. So I had to make the wheel myself. It turned out quite similar - especially if you look at it from afar.
Continuing to arrange the dacha, in the summer we installed a wooden gazebo on the site. When electricity was installed in it, it took a long time to choose which chandelier would best suit the interior made from natural materials. There were many options, but none of them completely suited us for one reason or another. Suddenly the idea arose to make a chandelier from a wheel that we made ourselves. Moreover, in style and color it matches the furniture of the gazebo. Without hesitation, we decided to carry out our plan.
CHANDELIER FROM WHEEL
So we have . To refresh its appearance, we once again painted the product with decorative varnish in the color of oak so that the chandelier matches the tone of the gazebo.
At an electrical goods store we bought an E27 ceramic socket for a light bulb and terminal blocks for connecting wires. We took two pieces copper wire and connected one end to the cartridge, the other to the terminal block.
Next, insert the cartridge into the wheel hub and secure it with a self-tapping screw.
Let's make 4 small corners from aluminum pendants and screw them to the chandelier at an equal distance from the center.
Using wire cutters, cut off 4 equal pieces from the decorative chain, separate the outer links and connect them to the corners.
We will screw 4 hangers with a thread at the end into the rafters and sheathing of the gazebo. We will choose the distance between them experimentally so that the length of the chain is sufficient to secure the chandelier under the roof.
We hang the product by adjusting the length of the chain so that it hangs horizontally to the floor.
To save energy, we will screw a modern LED lamp into a chandelier made from a wheel.
It turned out quite original and, most importantly, light. The wheel chandelier fits perfectly into the wooden interior. Now intimate conversations do not stop with the onset of darkness, but continue until the first roosters crow in the village.
