Velcro mosquito net for window. Simple and convenient protection against insects

Nowadays it is impossible to imagine metal-plastic windows without mosquito nets. IN summer period You can’t do without protection, since insects (mosquitoes, midges and flies) strive to get into your home. In addition, the mosquito net serves as protection against dust, debris and fluff entering the room. Order mosquito net You can complete it with windows and install it immediately after installing the window blocks, or you can purchase it separately.

The classic version of the mosquito net is made of aluminum profile, on which a mesh fabric is stretched. As a standard, mosquito nets for windows are made of fine-mesh gray mesh to protect our homes from penetration annoying mosquitoes and flies. In the last century, when no one knew about metal-plastic windows, there were no mosquito nets. In those days, people attached gauze or mesh to their windows. If it was very hot outside, in order to sleep peacefully at night and not worry that all family members might be bitten by mosquitoes, the windows were opened and the free opening was covered with a thin curtain. Naturally, such protection did not work and the insects still flew into the premises.

Now you can forget about the buzzing of mosquitoes and sleepless nights and order special plastic mosquito nets.

The main task of grids is to provide reliable protection housing from the penetration of flies, mosquitoes and midges. In addition, the mesh traps dust, debris and small particles that can cause allergies. If you install mosquito nets on your windows and doors, you don’t have to worry about your safety and the safety of your pets. Let's say you live on the 5th floor or higher, you want to open the window wide open to ventilate the rooms, but you cannot afford such luxury, since your beloved cat may fall out of the window. If you have a mosquito net, this can be avoided.

In addition to the listed advantages of protective nets, there is another important advantage - ease of maintenance. Twice a year, the nets are cleaned of dust and dirt with a soft sponge and soap solution. After half an hour we put the grid in its original place.

Types of protective products

The cost, mounting method and configuration of mosquito nets may vary. Let's consider the main types of protection:

on a frame made of a durable frame, removable design;
sliding structure on a frame;
roll;
fastening on magnetic tape or adhesive tape;
a product with an applied composition that protects the home from dust;
durable mesh – protection against pet claws.

Let's consider popular types mosquito nets used for installation on windows and doors.

If you have animals at home (a dog or a cat), then you also need to take care of the safety of your pets. You can order a protective net with the funny name “Anti-cat”. It is made from durable material, so the mesh can withstand heavy loads. If an animal tries to tear the mesh with its claws, nothing will work. The mosquito net will remain just as strong. A pet will not be able to damage the protection or tear it. For safety, this mesh model has a strong fastening, so it can not be removed for the winter.

A sliding mosquito net is suitable for installation on balconies and terraces. Consists of 2 sliding halves that open and close under pressure. In order for the mesh to function correctly, it is necessary to install guides; they are used to adjust and move the halves. The color of the mesh fabric is standard, gray. By the way, mosquito nets of any kind are made of gray fabric. This color does not impair visibility and does not affect vision.

Magnetic mosquito net is a convenient solution. This model is considered universal, since you can order a mesh of any size to install in the country, take with you on vacation, or provide protection in a home where windows are installed Not standard sizes. Among the advantages of this type of mesh, it is worth noting the ease of installation - you need to remove the protective tape and attach the mesh to metal-plastic window. The magnetic tape will keep it firmly on the frame. There is a second option for protecting windows, but instead of a tape with a magnet, the mesh is equipped with adhesive tape (similar to double-sided tape).

Among the disadvantages of mosquito nets in rolls, it is worth noting their fragility. In addition, such a structure cannot be called durable.

The classic version is a mesh stretched over a durable plastic frame. It can be made from a standard mesh fabric with small cells, with protection against pet claws and with a special coating - protection against dust. The mosquito net is installed on both doors and windows.

The version of the mesh with dust protection is made of fabric with very small cells that are capable of trapping large dust particles. This is the main advantage of a mosquito net; the disadvantage is that it is difficult to maintain. Since the product retains dust, it is necessary to clean the canvas frequently. To do this, you need to remove the structure and wash it with a jet warm water, then apply soap solution, wait 5-7 minutes and rinse again warm water. After water procedures the mesh must be thoroughly wiped soft cloth(not wet) to check how effectively the cells have been cleaned of dust. Despite the rapid contamination, the mesh transmits light well. The cost of such protection will be 2 times higher than the price of a regular mosquito net.

Mosquito net mount

Depending on the selected type of mesh, the fastening may be different:

“ear” fastening;
loops;
plunger pins;
“z-shape” fasteners.

A popular and commonly used fastener for installing mosquito nets is the “z” fastening. Installation using such fasteners will be easier and more reliable. It is important that you do not need to make holes in the metal-plastic frame. In addition, the mesh can be installed not only on plastic windows, but also on wooden frames. Among the shortcomings, only one thing is worth noting: this mosquito net holder does not provide a tight fit to the frame, therefore small insects can still squeeze through a small hole.

A reliable fastening option is the use of pins. They are screwed into the window frame, so the mesh fits tightly and insects cannot get inside the home. Ease of installation and reliability of fastening - this is worth paying attention to. It is also important that the mesh can be easily dismantled for the winter or in order to wash it from dirt.

Hinge mounts are best chosen when you need to install a screen on a door. Then it is advisable to order durable profile with an additional jumper so that the structure does not sag under its own weight over the years of operation.

How to install a mosquito net

When ordering mosquito nets for windows, you receive your order with necessary kit fasteners. When taking measurements, it is necessary to discuss the issue of fastening so that the manufacturer produces mosquito nets and provides a complete set of fasteners. If you deal with these issues yourself, then you need to familiarize yourself with some of the nuances in order to take measurements correctly.

What you need to know:

Open the window. Take a construction tape and measure the free opening, first horizontally (a), then vertically (c). Write down your measurements on a piece of paper.
Next, depending on the type of fastening chosen, you will need to add a few millimeters to the resulting figure.

If you want to work with a zigzag fastening (“z”), you need to add 5 cm to the resulting measurement figure for width and height (a and b). This is how we get net size height and width. You need 2 fastenings: lower and upper, plus 8 more screws (size 3.2 x 16).

If you want to install mosquito nets on windows on brackets, then you need to add 5 cm to the resulting figure “a” (width), and +18 mm to the height measurements.

When installing meshes on pins, add 2 mm to the measurements on each side.

Attention, if window opening There are protrusions that may interfere with the installation of the mesh; you must notify the manager about this when ordering. It is also advisable to take a photograph of the window and tell the specialists exactly how you took the measurements in order to avoid annoying misunderstandings when receiving an order and installing it yourself.

After you have chosen the method of attaching the mesh, you need to prepare the tools. May be useful at work electric drill, if you need to drill holes for hinges.

Features of installation of mosquito nets:

We make markings for fasteners. For a window of standard sizes, you can select 4 elements, for large windows – 8.
After the intended markings, using a drill, we drill holes in the frame of the mosquito net.
We attach the fasteners to the frame, screw in the screws, and check our work.
Now you need to make 2 more markings for attaching the holders. We take vertical measurements, divide the resulting figure in half - this will be the attachment point.
We screw the holders into the plastic frame of the mesh with screws and check the strength. The material can be different: plastic or metal. If you choose the first option, then it is advisable to handle the holders very carefully, as they break quickly.

How to insert a mosquito net

Many people who decide to install the nets themselves are wondering: “How to put a mosquito net” on a window. This work is not difficult, the main thing is to be careful not to accidentally drop the net on the ground.

It is necessary to turn the fastening element (“ears” or holders) to the “away” position in order to install the mesh. Now take the mesh by the holders and carefully move the mesh outside the window, now bring it back, insert it into the lower part and fix it at the top. Hold the net by the holder with one hand, and with the other hand try to turn the fasteners to fix the frame. That's all, you have successfully completed the job, now you can enjoy fresh air without fear that insects will bother you.

We have reviewed external method attaching mosquito nets to windows. There is another method that can be used for installation protective structures- This is an internal fastening.

The installation of the mesh is performed slightly differently:

holes must be drilled around the perimeter of the window opening;
Next, we fix the fasteners;
install the handles in the middle of the mosquito net;
We take the mesh by the holders, first place the mesh on top of the window to install the lower part of the mesh in the grooves;
Then we lower the canvas and align it in the opening.

At first glance, the installation may seem to you challenging task, but if you delve into the intricacies of installing a mosquito net, then you will enjoy the work done with your own hands. Just remember that, regardless of the chosen fastening method, the mesh is not designed to withstand strong mechanical pressure, so you do not need to let your pets and children close to wide open windows.

How to remove the mesh

In winter, it is best to remove mosquito covers from windows to protect them from harsh weather conditions. weather conditions. If it is not possible to remove the nets so that they are not damaged indoors, then they can be left on the windows. Nothing bad will happen to the nets, only the service life of the products will be shortened.

To remove the nets, you need to do the opposite: first turn the ears or brackets to the sides (do not forget to hold the product with one hand by the holder). Next, take the mesh out, unfold it, and bring it into the room. Carry out this work very carefully so as not to let the mesh fall to the ground.

You can and should take care of the nets. At the end summer season, when it’s already cool outside, the protection can be removed and washed. You can simply wipe the product with a damp sponge to remove dust, lint and dry insects, but it is best to take the nets to the bathroom and wash thoroughly with warm water. detergent. There is no need to rub the canvas vigorously, just walk over the surface with a damp sponge to remove dirt, then apply a soap solution, wait a few minutes and rinse with water. This manipulation must be done at least 2 times a year.

Installation of mosquito net. Video:

With the arrival of warmer weather, hordes of insects come back to life and you can’t live without mosquito nets. Only they are able to protect the premises from the ubiquitous insects. And then some copies manage to leak somewhere. But since the nets are for some reason very short-lived, they have to be replaced or repaired. You won’t call a company representative every time and pay pretty decent money for a job that only takes a couple of tens of minutes. That’s why they try to make/repair/install a mosquito net with their own hands.

Types of mosquito nets

There are three types of mosquito nets:

As you can see, there are many types. Nevertheless, in 90% of cases frame structures are installed. At a low price, they create quite normal level comfort.

Types of fastening frame mesh

Most often, it is frame mosquito nets that are installed. There are two ways to attach them: Z-shaped brackets and rods (plungers).

Different ways to install a mosquito stack

When mounted on brackets, they are mounted on the street side. In most cases, this is convenient and, if circumstances permit, this installation method is chosen. The dimensions of the mesh must be larger than the light clearance of the window sash: the frame is inserted from the outside.

When using plungers, the mesh is also attached behind the glass, but the clamps themselves (rods) are located on the side of the room. This device is convenient on the first floors: it is impossible to remove the mesh from the outside. When installing a mosquito net on rods, its frame must be equal to the size of the light opening. You can’t do it with millimeter precision, but to ensure there is no gap, a brush is attached around the perimeter. It prevents insects from getting in.

View of the installed mosquito net on the rods from the street

How to measure a window for an order

Quite often, a frame with a mesh is ordered from a company, and it is installed on the windows yourself. When ordering, you will be asked to indicate the dimensions of the light opening. The required measurements are taken with the sash open. You measure the distance from one sealing gum to the other: width and height. Measure in several places, write down with millimeter accuracy. The accuracy determines how well the grids will fit your window.

How to measure a window when ordering a mosquito net

Watch how to measure windows to order mosquito stacks in the video.

What you need to know

When ordering or purchasing a mesh for a window, you need to pay attention to its characteristics. Firstly, it comes with different sizes cells: from 0.6 mm to 1.2 mm. The smaller the gap, the less likely it is that an insect will “leak through” and the less fluff there will be. But when high density air also flows poorly, which southern regions may be critical. Because best option somewhere in the middle 0.8-1.mm.

The mesh is also available from different materials:

Cotton. Cotton thread has high UV resistance. Its fleecy structure increases the “retention” ability: insects do not crawl through such a mesh. But since the fiber is natural, it reacts poorly to moisture, is often affected by mold and rot, and therefore is rarely used.
Polyester. The most common material. It is quite strong and durable, although it has a low price, but does not have any special properties.
Nylon. A special anti-allergenic mesh is made from nylon. It is produced using a special technology with complex weaving. Due to this, it even traps dust and pollen. Such nets are often called “anti-dust” or “anti-allergy”.
Fiberglass. It is considered optimal because it has high transparency: when using such grids, the degree of illumination almost does not change. At the same time, its strength is very high - comparable even to the strength of metal. An anti-cat mosquito net is made from fiberglass, which can withstand the weight of the animal and does not tear under the claws.

If no special properties are needed, choose the usual one - made of polyester. Sometimes they may ask what color mesh is needed. The most invisible to the eye is gray, so that’s what you can order.

How to install a frame mesh on a plastic window

You have received a ready-made mesh. It comes with 4 small Z-brackets (brackets). Please note that they have shelves different sizes: two 4 cm each and two 2.5 cm each. Brackets with large shelves are installed at the top of the frame, with smaller ones at the bottom.

Z-shaped brackets have different lengths shelves

To attach to the frame, each support bracket will need 2 self-tapping screws with a screw, which are also called “seeds”. You will need a marker with a thin lead or a soft pencil. You will need a drill with a 2 mm drill bit and a screwdriver or screwdriver.

On the outside of the window frame we draw a strip 3 cm below the edge. We stand on small stepladder or on a chair, place the frame with the mesh outside the window, and also lean out halfway. Applying the bottom edge of the frame to the drawn line, mark its top.

You can do without manipulating the frame: you need to accurately measure its height and set this value aside from the line drawn below. From the resulting point we put another 1.8 cm up and here we draw a second line. We will use it to align the fastener shelves.

We take brackets with long walls. We apply it so that the protrusion is on the line. You need to retreat about 10 cm from the edges relative to the light clearance. Mark the points where you will need to make holes. We carry out a similar operation with “short” brackets from below. To control, measure the distance between the marks at the top and bottom. It should be 1.8 cm longer than the length of your frame. If everything is correct, drill holes in the profile (2 mm drill) and install brackets on the “seeds”. Actually, that’s all, we can assume that the mosquito net was installed with your own hands.

Installing mosquito stacks in a window

Now take the net by the handles, turn it slightly sideways, and take it outside. Insert the upper edge into the upper brackets, align it vertically, lift it all the way, place the edge behind the lower brackets and lower it. The mesh stands supported by brackets.

It is removed in reverse order. Take hold of the handles, lift up until it stops, remove the lower edge from the brackets, moving the mesh a little away from you (a couple of centimeters, no more). Then, moving it down a little, you pull it out of the upper brackets.

Installation on corners

There is another type of fastener, similar in principle to “work” with brackets - corners. When installing this type of clamp for a mosquito net, you also need to accurately measure the width. To do this, you will have to find the center of the light opening, from which to set aside half the width of the grid. The inner part of the corner should correspond to the width of the frame with the mesh with a small gap of 2-3 mm for freedom of fixation.

Corners for installing mesh

That is, if there is this type of fastening, they fix the corners and the width should be exactly at the corners. When installing, we leave the same gap of 1.5-1.8 cm in height. It makes it possible to install the frame in the mounts, and is held in place due to the fact that the upper shelves are larger.

Do-it-yourself mosquito net: we assemble it ourselves

As you understand, you can assemble the frame and stretch the mesh yourself. All components can be purchased from companies that sell spare parts for plastic windows. The following components will be needed:

This is what the frame for a mosquito net looks like in a semi-assembled state

profile for mesh frame MFP2;
impost profile (transverse partition with a mesh height of more than 1 m) MFPI and two fastenings for it;
mesh fabric;
corners for assembly;
sealing cord (rubber or even woven);
handles - 2 pcs;
screws with countersunk head with drill, dimensions 3.9*16 mm;

Frame assembly

The frame consists of two long profile sections and two short ones. They are connected to each other using corners. They can be plastic (cheap but short-lived material) and metal, painted with white or brown paint (to match the profile).

They also often install an impost - a jumper, which is installed approximately in the middle of the long side. It increases the rigidity of the structure and prevents long profiles from “playing”.

The lengths of the profiles must be cut taking into account the fact that they are assembled into corners. Therefore, 20 mm is subtracted from the width and length of the light opening (how to measure as described above) - this is exactly the length that is replaced by the corners.

Saw off two sections of the required length from the profiles. It's better to cut hand saw for metal - you get a more even cut with almost no burrs. It is brought to smoothness with a file or sandpaper. Then on a flat surface - more conveniently on a table, laying the profile with the grooves up, fold the rectangle, insert the corner holders - the grooves are also up. In the photo, the grooves are directed downwards, but this is inconvenient - you then have to turn the frame over.

We assemble a frame from profile sections and corners

If the corners and profiles match normally, they should be inserted tightly. Very tight. It won't work to put it in place with your hands. You will have to tamp it down, and in order not to damage the plastic, use a lining - wooden block or a piece of chipboard, as in the photo.

How to assemble a frame for a mosquito net for windows

When assembling, also check the corners. They must be strictly 90°, or the frame will be askew, and there will be cracks into which mosquito flies can crawl. After the rectangle is assembled, we install the impost. We saw it off 2-3 mm shorter than the resulting width of the frame, insert holders on both sides, and secure it to the frame in the groove.

Impost and holder

Stretch the mesh

We spread the mesh over the assembled frame. It should be 3-5 cm larger than the frame on each side: this will make it easier to tighten. We take the cord and press it through the mesh into the groove. You can start from one of the corners, or you can from the middle of the short side, alternately moving to the right and then to the left.

The cord goes in quite rigidly; in workshops it is rolled up with a roller; if it is missing, you can use any object with a rounded surface. The handle of a stationery or kitchen knife, the holder of a screwdriver, the handle of scissors, etc. will do. While straightening the mesh, insert the cord.

Types of handles: plastic and with a metal base

Installation of handles

Having reached the installation site of the impost, we install the handles. Usually they are thin, plastic, inserted into a groove under the mesh, then pressed with a cord. There is a second type of handles - they are denser, sometimes with a metal base, screwed onto the profile with self-tapping screws, but after the mesh has been stretched. If you have a choice, take metal ones or at least plastic ones, but thick ones. The plastic ones are very flimsy and often break.

If during the process the mesh lies crooked, the cord can be pulled out by prying it with a screwdriver or something similar, straightened, and rolled up again. Having finished stretching, check the width and height of the frame at several points. If there are deviations somewhere, it means that the mesh is stretched too tightly in this place. It is loosened by pressing a little with the palm of your hand near the frame. If it is not possible to equalize the width, the cord is hooked and pulled out at some interval. Having equalized the width, holding the mesh, tuck it in again.

You can pry off the sealing cord with a screwdriver

If all the dimensions match, you can cut the cord, tuck in the tail, then walk along the profile again, checking that the seal fits evenly. Now the protruding edges can be trimmed. This is usually done using stationery knife. That's it, the mosquito net has been assembled with your own hands, you can start installing it on the window.

An example of assembly can be seen in the following video. This ads: the company sells ready-made kits for self-assembly. The process is not detailed enough, but general outline can be considered.

Homemade mosquito nets: saving to the fullest

If you calculate the cost of all spare parts and take into account the time lost on purchasing and assembling them, the benefit is dubious. They still sell components to you at a higher price than to companies. It can only be useful in the sense that after self-assembly you can easily repair it yourself.

However, there are quite a few inexpensive options homemade mosquito nets. They are made using a frameless principle and are mounted directly on the window. There are two ways to install this:

Velcro is a knitted tape that consists of two parts - a tape with hooks and a counter with a rough surface. The mesh is cut out a little larger than the light opening, the counter part is sewn to the mesh, and the part with hooks is on sticky layer attached to the frame around the perimeter of the window.
On the sealing cord. It is inserted in place of the standard seal. To do this, remove it (pry it up and pull it out), stretch the mesh over the opening, and press the cord into the groove. The principle is the same as when installing a mesh in a frame.

Second way self-made see the video for a budget mosquito net. The idea is great, the costs are minimal.

Video on the topic

Pleated mesh

Hinged mosquito net

How to reduce the amount of dust through the mesh

Replacing handles on a mosquito net

Kirill Sysoev

Calloused hands never get bored!

Content

I really want to open the balcony and windows with the onset of warm days, so that the house can receive Fresh air. A problem arises: numerous insects - wasps, flies, mosquitoes - become active at the same time. If you install mosquito protection, you can easily correct the situation.

What types of mounts are there for mosquito nets on plastic windows?

Mosquito frames are popular because they protect the premises from external influences. You can order them immediately when installing windows, or install them later. Over time, old structures deteriorate and require updating and replacement. Due to the low price, installation of the product is not profitable for specialists from companies. You can figure out how to install a mosquito net on plastic window, change it yourself. With the help of such protection you can protect yourself from the effects of:

rain, snow;
dust, dirt;
mosquitoes, midges.

Before you learn how to install a mosquito net on a plastic window, understand the design features and fastening methods. An affordable option with a frame is also often used. To assemble such an anti-mosquito structure yourself, you will need special tools, skill, and dexterity in work. It is more profitable to order it from specialists - you first need to measure the internal opening of the installation site, and then install it yourself. The necessary holders can be purchased inexpensively in an online store or purchased from the same company.

The type that is attached to the opening with Velcro is distinguished by its low price. When replacing old structures, you can use in modern ways protection. How to attach a mosquito net to a plastic window? There are fastening methods:

plunger - fixed with pins;
sliding – moves away along runners;
door – the design is equipped with hinged hinges;
roll - unwinds from a special drum;
installation of hooks;
securing mounting angles;
fixation with magnets;
rotating structures;
spring-loaded pins into the internal opening.

How to reliably install a mosquito net on a plastic window when animals live in the apartment? Special reinforced fasteners will protect the cat even if it jumps onto the structure after a flying bird. A more durable model of the “anti-cat” system will protect pet from injuries. If you do not tolerate dust well, when replacing it, you can install a structure with the smallest cells that do not let it through. For the sunny side, it is good to hang a device with a reflective coating. This will keep the house cool.

How to put a mosquito net on a plastic window

Cope with installation work Can be done by anyone holding a screwdriver. Figure out how to install the mesh on a plastic window using mounting angles. You will need fasteners - two upper and two lower. For clarity, look at the photo:

The parts are attached to the window with self-tapping screws outside. To do the job you need:

measure the internal opening;
order a ready-made frame with dimensions 20 mm larger than the received dimensions;
purchase components.

How to attach a mosquito net to a plastic window? We follow technology:

set aside 30 mm from the outside downwards from the opening;
At the top we mark the size 40 mm;
we make marks from below from the side of the opening inwards with a distance of 20 mm;
we apply a smaller bracket, aligning the inner shelf with the lower marks on the window;
fix masking tape;
fasten with self-tapping screws;
We repeat the operation from above with large brackets, installing the inner shelf according to the markings - it should look down.

It will not be difficult to install the structure in place. Instructions for inserting it correctly:

you need to take the frame outside the window, holding it by the handles;
With a slight inclination, place it upward until it stops in the bracket shelf;
align vertically;
lower, place on the shelf of the lower bracket;
To remove, you need to do the operation in reverse order.

Prices for installing a mosquito net on a plastic window

Figuring out how to install an anti-mosquito frame yourself is not easy, and sometimes even impossible. To get an idea, get acquainted with the prices for work offered by companies in Moscow. One installation costs from 350 to 800 rubles. The total cost does not include delivery and calling a specialist to measure the dimensions. Price range for square meter to manufacture and install the structure is:

for frame ones - 1200-1500 rubles;
sliding – 2500-2800 rub.;
roll - 3500-3800 rub.;
“anti-cat” type - 1700-2000 rubles;
“anti-dust” – 2400-2700 rub.

Video: installing a mosquito net on a plastic window yourself

If you are planning to protect your apartment from mosquitoes and other insects, see how to install a mosquito net on a plastic window yourself. They will help you understand the peculiarities of measurements, necessary tool and mounting video instructions. You will learn how to insert a mosquito net into a plastic window and see little installation tricks. Everyone will understand why repairing and installing mosquito protection on your own is more cost-effective than ordering installation by specialists.

Found an error in the text? Select it, press Ctrl + Enter and we will fix everything!

When the long-awaited warmth arrives, we want to constantly keep the windows open so that fresh air fills the rooms of our home. pleasant aromas. To protect against unwanted insects, special devices are installed on window openings. Our article will tell you what types there are, what are the design features and how to properly install a mosquito net on a plastic window.

Sliding mosquito net

Types of grids

There are several main types of anti-mosquito structures.

"Anti-cat"

This type of net will not only protect your house or apartment from insects, but will also ensure the safety of your pet and prevent it from falling out of the window opening. Made from particularly durable material, it can withstand very serious loads. Your pets will not be able to tear or damage this design. You don’t have to take it off even for the winter; it can withstand very low temperatures, and strong gusts of wind.

Sliding structures

You can install this type of device either on regular windows, and on terraces or balconies. The design consists of two sliding elements that can be opened and closed. But installing this device on a window requires the installation of special guides along which the sliding parts will move.

"Anti-dust"

You can protect yourself from the penetration of allergens into your home by installing an anti-dust mesh. Made from dense material, it will trap even the smallest particles. But such a structure gets dirty very quickly. However, ease of care is one of its advantages. To do this you will need a warm soapy solution and a sponge. The density of the material does not affect the quality of visibility. The main disadvantage is the high cost.

Removable frame grids

This standard designs, made according to the size of the sash into which they are inserted. They allow sunlight to pass through and protect against insects. If the device is large, then an additional bar is mounted in the middle, which gives the entire structure reliability. The removable frame mesh is inexpensive.

Plunger pin for mosquito net

Types of fastenings

You can install a mosquito net on a window using plastic corners, plunger pins or z-type fasteners. The latter type of fastening is considered more reliable and convenient. It does not require creation additional holes and can be used on frames made of both plastic and wood. Its disadvantage is the loose fit of the protective structure.

Plunger pins are metal parts that are adjustable in length. Their design includes a spring. Installation and dismantling of the mesh device in this case is very easy and is suitable for any type of window.

Plastic corners are installed on the outside of the window. The mesh is easily removed and does not interfere with the normal functioning of the sashes.

Installation

Installing a mesh device on a window is not difficult, but it requires following a certain sequence of work. To do this, you need to prepare 4 fasteners and 8 screws, a screwdriver.

Take measurements. Corner fasteners are placed in the corners of the frame, while non-corner type elements are placed at an equal distance from each other.
Secure the fasteners with self-tapping screws.
Insert the device first into the upper fasteners, then lower it into the lower ones.

When you remove the mesh structure, grasp the plastic holders with both hands and gently pull up, protective device will come out of the plastic corners. Bend it and remove it from the upper elements.

Installing a mosquito net on a window or doorway means ensuring a comfortable stay in your own home. This design will avoid the use of various chemicals which may be hazardous to health.

To protect the premises from flying insects during ventilation, mosquito nets are installed in plastic windows. By installing mosquito nets on your windows with your own hands, you will no longer need to use by various means to kill mosquitoes indoors. All types of mosquito nets for plastic windows easily allow air to pass through and almost do not allow water to pass through, without blocking the view from the window. Installing mosquito nets on plastic windows is very easy, just like removing the mosquito net from the window. For the winter, you need to remove the mosquito net from the plastic window, wash it with a sponge and soap and put it somewhere.

Usually, a mosquito net for plastic windows is not assembled with your own hands, but purchased ready-made

The mesh consists of a frame profile, an impost profile, special connecting corners, 4 holders, two handles and a tension cord. The frame for the mesh is made of painted aluminum profile so it is very strong.

Kinds

Depending on how the mesh is attached to plastic windows, the mesh can be: different types, and the methods for attaching a mosquito net to plastic windows are as follows:

Framework

This view is standard. First, the mesh is attached to the frame, then the holders are attached, and then the mesh is installed on the windows. This type of mesh is usually installed in apartments. Frame nets are made sliding or removable.

How to attach a mosquito net to a plastic window with your own hands

Installation of nets on plastic windows begins with fastening the holders to window frame two on top and two on bottom. Moreover, the holders can be attached from the outside to the window frame or from the inside to a profile with a mesh.

How to install a mosquito net on a window using internal holders

When mosquito nets are installed on large windows, an additional reinforcing bar is placed in the middle of the frame for the net.

Plunger

In this type of mesh, the holders are not attached to the window frame, but directly into the mesh profile. Install this mesh directly into the window frame.

How to put a mesh on a plastic window using plungers

The fastener for mosquito nets on plastic windows is a pin on a spring. When installing a mosquito net on a plastic window, the holders on springs are recessed into the profile and, due to their extrusion by the springs, the nets are held on the frame.

Sticky

Such a grid can be in a profile or without it. Velcro, double-sided, is attached to the frame on the inside of the window around the opening sash. duct tape or special magnets.

Sticky fastenings for mosquito nets on plastic windows

Some material is also attached to the mesh that will best adhere to it.

Looped

This type belongs to the frame type and is used mainly on balcony doors. Such nets are attached not to holders, but to hinges that are attached to inside frames

In plastic windows, the mosquito net is installed on hinges

Such networks are opened as regular doors and a handle is attached to them with the help of which it will be convenient to open and close them. Special magnets are used to keep them closed.

Rolled

This type is also mainly installed on balcony doors.

Attaching mosquito nets to plastic windows

This type is a mesh rolled into a roll and lowered onto the opening along special guide profiles. For ease of lowering, a bar with a handle is attached to the net.

Pleated

This type is also used for protection balcony doors from mosquitoes entering the room.

Installing mesh on windows in the form of an accordion

This mesh is attached to the side of the opening and when opening it, it gathers into an accordion.

Metering

Before making the mesh, you need to take measurements of the opening that will need to be blocked. If mosquito nets are attached to plastic windows from the outside, then only the net should cover the opening, and the frame of the net will be pressed tightly against the window frame. Loop, frame and frame types with Velcro are attached in this way.

How to measure a mosquito net for a plastic window

If the mesh will be attached directly to the opening, then the frame of the mesh should be only 2 mm smaller than the opening, both in height and in length. In this way, plunger, roll and pleated are attached. If only the mesh will be attached to the Velcro, then the mesh should be more opening by 5 cm.

Installation

Installing a mosquito net on a plastic window begins with making a frame and attaching the net to it. To do this, lay the profile on a flat surface and connect it with corners. A mesh is placed on the profile, stretched and fixed with a cord, which is recessed into a special groove in the profile using a special roller.

Using a special roller, assemble window screens onto plastic windows.

When the mesh is fixed in the frame, the holders begin to be attached. To secure the holders to the frame or to a frame with a mesh, you need to mark the places for their installation. Then take a drill and drill holes for screws in the frame or for a spacer mechanism in the frame. The holders are attached to the window frame from above and below, with holders with a low side attached from below, and holders from above with a high side. To install the mesh on a plastic window with such holders, you need to take the profile with the mesh by the handles and first insert it all the way into the upper holders, and then insert the profile into the lower holders. To insert a mosquito net into a plastic window using plungers, you must first insert one side, and then press the spring holders into the profile with your hands and insert the other side.