Is it possible to clean the oven with a vacuum cleaner? How to clean a chimney in a stove

Even a perfectly built stove and chimney will begin to need cleaning over time. In this particular case, the quality of its manufacture will directly affect the intensity and frequency of this process. Considering that the owners themselves can further contribute to pollution chimney, it becomes obvious that you will have to clean it at least once a year. How to clean soot from the stove, what signs indicate the need for this? Let's try to figure it out.

When should you clean your stove?

You will have to clean the stove from soot before you start heating season. The following signs may also indicate that such a need really exists:

Smoke color. It is a clear indicator of the cleanliness of the chimney and stove. If black smoke comes out of the pipe, it means that the channels are full of soot and you should immediately begin cleaning the system.
The color of a burning flame. Another indicator indicating that the chimney pipes are full of soot. The ideal flame is one that has light shade orange color. If the fire gets dark colors, then this indicates a lack of traction in the system.

You should not use cellophane, plastic bottles, or light a fire with liquid fuel for heating. Our ancestors also believed that it was extremely wrong to heat a stove with leftover food, damp firewood or garbage. This contributes to the accelerated appearance of soot in the pipes, which in turn leads to the appearance of condensation, which destroys the chimney.

You will have to clean the chimney every time these alarming symptoms are observed; you should also pay attention to the unexplained loss of smoke draft; this can also occur due to contamination of the channels.

How to clean the stove?

There are both folk methods of how to get rid of soot in a furnace, and more scientifically based ones. Surprisingly, both are effective almost equally. To do this, you can use the following options:

Before cleaning the furnace chimney from accumulated soot, you need to make sure that there is no bird's nest in it. To do this, a special pole is inserted into the pipe and when a nest is detected, it is pushed to the inspection holes and removed from the chimney.

Of course, you can do all the work on cleaning chimney ducts yourself, but first it would be good to consult with a specialist. It is correct that the stove maker monitors all stages of the work being performed for the first time. It is also worth taking care of correct operation furnace, which significantly reduces the frequency with which such maintenance is necessary.

However, if you need to clear a clogged water supply at your dacha, simple everyday methods will come in handy.

1. The simplest and quick option- this is the use of a plunger. This method is effective only if there is a small blockage; if it is a minor problem, you can forget about the blockage in just a few minutes. If you don’t have a plunger at hand, you can use a cardboard bag instead, for example, the kind that is used as packaging for dairy products. The edge of such a bag is cut off, the cut part is inserted into drainer, then sharply press the bag with your palm.

2. If the blockage is large enough and superficial methods of removing it are ineffective, specialized chemical compounds can be used. They are not capable of damaging even polyethylene pipes, so they can be safely used both at home and in the country. However, if you don’t have a pipe cleaner at hand, you can use its household equivalent: pour regular baking soda down the drain, and then pour in a little vinegar (no more than 100 ml). Due to the reaction resulting from the interaction of soda and vinegar, even severe blockages. However, when using this method, you should follow safety regulations.

3. If it is necessary to clean pipes that are made of metal, it is acceptable to use a cable. It can be used in other types of pipes, however, during unprofessional use, it can damage the surface polyethylene pipe, or a joint made using fittings.

Blockages can occur completely unexpectedly, since they are often caused not by foreign objects that have gotten into the pipe, but by poor water quality, as well as food debris that has gotten into the drain. In order to promptly deal with blockages in your arsenal, it is always necessary to have chemicals, as well as a plunger, which, despite the presence of various innovations, still remains the most effective means of combating blockages.

Tip 1: How to clean a chimney
👍, How to clean a chimney. Once a year stove chimneys needs to be cleaned. Moreover, they need to be cleaned only by hand.

When to clean the stove
How to clean the stove

Even a perfectly built stove and chimney will begin to need cleaning over time. In this particular case, the quality of its manufacture will directly affect the intensity and frequency of this process. If we consider that the owners themselves can further contribute to the contamination of the chimney, it becomes obvious that it will have to be cleaned at least once a year. How to clean soot from the stove, what signs indicate the need for this? Let's try to figure it out.

When should you clean your stove?

You will have to clean the soot from the stove just before the start of the heating season. The following signs may also indicate that such a need really exists:

Smoke color. It is a clear indicator of the cleanliness of the chimney and stove. If black smoke comes out of the pipe, it means that the channels are full of soot and you should immediately begin cleaning the system.
The color of a burning flame. Another indicator indicating that the chimney pipes are full of soot. The ideal flame is one that has a light shade of orange. If the fire takes on dark tones, this indicates a lack of draft in the system.

How to clean the stove?

There are both folk methods of how to get rid of soot in a furnace, and more scientifically based ones. Surprisingly, both are effective almost equally. To do this, you can use the following options:

Potato peelings. You will need about 1 - 1.5 buckets of this fuel. It is burned without the use of wood. The starch released during the combustion process helps burn soot. It is recommended to use this method only as a preventive measure.
Cleaning log. Special chemical composition helps burn soot out of pipes without the use of mechanical cleaning. The disadvantage of this method is the high temperature at which the “log” burns out. Some chimneys cannot withstand such intensity and can burn out along with the soot. Cleaning soot in the stove in this way is also not recommended if the owners have any allergic reactions to odors. After the combustion of substances, the aroma of the chemicals used will remain in the house for some time.
Mechanical method. The most proven cleaning method. For it you need to purchase a special brush with a weight attached to the end. It is slowly lowered into the chimney channel. After this, the fallen soot is removed using special inspection windows. This method is usually the most productive, but it requires sufficient practice and experience to use it.

Of course, you can do all the work on cleaning chimney ducts yourself, but first it would be good to consult with a specialist. It is correct that the stove maker monitors all stages of the work being performed for the first time. It is also worth taking care of the correct operation of the furnace, which significantly reduces the frequency with which such maintenance must be carried out.

Stove contamination - how to clean soot from the stove
There are many in various ways how to clean the stove from soot. Soot is cleaned using several methods, ranging from burning potato peelings and special chemical cleaning logs and

Those who have stoves or fireplaces in their home or apartment know how important it is to regularly care for and clean them. After all, no matter how thorough and perfect a stove is, if you don’t take care of it, sooner or later it may break. Few people know, but the operation of the device depends on the design of the stove itself, its quality, the type of fuel consumed and operating conditions. But, even if you comply with all the conditions specified in the instructions, then after a year you will have to think about how to clean the chimney.

You can get rid of pollution in the form of soot either independently or with the help of a chimney sweep - it all depends on your desire and, of course, on your material wealth. So, first you need to understand why soot comes out of the chimney and is it really so important to clean it on time? In any furnace, when fuel burns, soot is always released. Under the influence of hot air, soot and soot rise up and settle on the walls of the chimney.

If this soot is not removed, it gradually accumulates, and after a year the soot layer is several tens of centimeters. Ultimately, this can lead to quite unpleasant consequences. The chimney opening narrows and the draft becomes much less. And this phenomenon already leads to wear and tear of the chimney walls, as a result of which the chimney duct may catch fire. There are numerous cases of fires that occurred as a result of a clogged chimney. You need to get rid of soot in the chimney at least for basic safety reasons.

Methods for cleaning a chimney

Cleaning the smoke duct is divided into 3 main groups:

Self-cleansing
Chemicals,
Mechanical cleaning.

How to clean a pipe in an apartment using so-called home remedies? One of the most common methods is the usual salt. According to experts, this method is more suitable for preventing the formation of soot in the chimney. Before adding fuel, mix it with a few glasses of salt and then you can forget about cleaning the chimney for several years. Remember that salt will not help clean a stove with a lot of soot on the pipe.

Second folk way- this is the use of potato peelings or regular raw potatoes. In this case, the amount of potatoes is taken based on the diameter of the chimney pipe. On average, to get rid of soot, you will need 2 buckets of potatoes.

So, how to clean the stove? Take the potatoes and pour them directly into the fire. The effect is that the starch is released from the vegetable and begins to soften the soot, which as a result begins to come out of the chimney. After you burn the potatoes, clean the oven. Otherwise, all the smoke will come back again and there will be a large number of burning.

Exposure to chemistry

How to clean a chimney in an apartment using a chemical? This is the second way to clean a chimney from soot. You can get rid of soot and clogs using a special anti-carbon chemical composition, for example, Kominichek from a Czech company. This powder must be added along with fuel, observing a dosage of 200 grams of product per 1000 kg of fuel.

How does the effect of the powder manifest itself? During heating, the soot begins to gradually burn, and the temperature of this reaction should not be high. Such powders work with both liquid and solid fuels.

If you cannot purchase cleaning powders, then pay attention to logs called “Chimney Sweeper”. This product is quite economical and you will only need one briquette for 6 months, but this is provided that you light the fireplace twice a week.

Before using any of the above products to clean soot in an apartment, you need to make sure that there are no foreign objects or debris in the pipe.

Do not be alarmed that after using the Chimney Sweeper log, soot will fall out of the chimney for two weeks; this is normal and indicates that the product is working effectively.

Mechanical cleaning

You can get rid of soot mechanically. But here it is important to observe correct sequence actions. If this is your first time doing this, then it is better not to risk it and call a chimney sweep. Those who are confident in their abilities are advised to follow these rules:

Close the openings through which smoke escapes from the apartment. If you don't do this, all the soot from the chimney will fly into the house.
Close the firebox door tightly. Fireplace open type will need to be covered with a damp cloth.
Now you can climb to the roof, but follow safety precautions. Under no circumstances should you clean the chimney in windy or rainy weather.
Open the channel that is designed to remove smoke and look at the soot layer. If it is insignificant, that is, less than 5 mm, then go home and start cleaning with chemical or home remedies.
If the soot layer is more than 5 mm, then carefully inspect the chimney for debris. If you find any, push them down with a long stick to remove them already in the apartment.
The soot layer must be cleaned with a scraper or brush.
To clear the jam, you need to use a small metal ball that is attached to a cable.
After cleaning the chimney, you need to open the cleaning holes slightly and remove soot from them.
In the last move you need to clean the firebox.

If you have a fireplace with a direct chimney, then it is best to clean it through the firebox, that is, from below.

Cleaning a chimney is actually quite simple, the main thing is to know what and how to do. You can choose one of three oven cleaning options. Before cleaning, be sure to look at the amount of soot that has accumulated on the chimney over the entire period of operation. Most owners of fireplaces and stoves clean the chimney themselves mechanically. But, you must understand that this is a very dirty job that will take several hours of your time.

If you clean the chimney of soot, you can safely forget about problems with the fireplace for a long period of time. To reduce the amount of soot that accumulates on the walls of pipes, try not to burn various debris in the form of plastic bags And plastic bottles. It is also not recommended to put raw spruce or pine wood into the stove.

You can tell by the color of the smoke that it’s time to clean your chimney. If the pipes have not had time to accumulate soot, then clear smoke will come out of them. If the soot layer exceeds several centimeters, then black and thick smoke comes out of the chimney.

How to clean the stove yourself?
How to quickly clean the stove? The three most optimal methods for cleaning the oven: mechanical, chemical and folk remedies. Useful recommendations.

Safe and long-term use of the stove is only possible if its internal passages and chimney are regularly cleaned. Ignoring measures to remove soot ultimately leads to a narrowing of the lumen in the chimney and incomplete or insufficient quick removal smoke and combustion products. Sometimes soot deposits inside the pipe can ignite and cause a fire. The article below will discuss ways to clean soot from chimneys and stoves.

Chimney cleaning methods

Experienced stove makers advise checking the condition of the chimneys in the stove twice a year. This will allow you to identify the problem in time, if one has arisen, and remove soot accumulation on the walls of the chimney. Since the process of cleaning the furnace from soot itself is not particularly difficult, you can cope with this task yourself. There are several common methods for this.

Cleaning soot with chemicals

IN in this case We are not talking about traditional immersion into the chimney, as chimney sweeps used to do, but about cleaning the stove from soot using special chemicals. They are added to the main fuel and during the combustion process they release special substances that accelerate the decomposition and burning of soot build-up on the walls of the chimney.

You can purchase such products in the form of briquettes, liquid or powder. It is noteworthy that it is advisable to use these preparations not only for cleaning a dirty chimney, but also as preventative measure to prevent the build-up of soot in hard-to-reach areas of the chimney that cannot be reached mechanically. Please note that before cleaning the pipe from soot with chemicals, you should read the manufacturer's instructions on the packaging.

Most often, consumers purchase the Russian “Chimney Sweeper” and the Czech “Kominicek”. As an option, you can buy PHC powder or an anti-carbon chemical composition, which allows you to soften soot deposits that burn out and spill into the firebox.

You can prepare a similar composition at home from copper sulfate, saltpeter and coconut charcoal, collected in a ratio of 5:7:2. You need to take 200 g of the mixture and pour it onto the smoldering coals. The caustic gas released will corrode the soot seals.

Mechanical method of removing soot

In cases where, as a result of diagnostics, foreign objects or a too thick layer of soot on the walls of the chimney are discovered, mechanical cleaning can help. However, you should not take it if the layer thickness does not exceed 2 mm, so as not to damage the pipe walls.

Before you clean the stove from soot with your own hands, be sure to tie yourself with a rope for insurance. In addition, it is better to do this activity in dry and warm weather. First of all, you need to clean the ash pan and the firebox from residual fuel and soot. Then the damper at the chimney inlet is removed, and the doors and valves, on the contrary, are tightly closed so that soot does not fall into the house.

When diagnosing a chimney, you should inspect the channels for the presence of foreign objects or debris that could fly in during windy weather. Debris is pulled out from above, if possible, or pushed further with a pole to be removed from the oven below. If you cannot remove the blockage this way, you will need a heavy cannonball on a strong rope.

To clean the stove at home as best as possible, you will need a brush (if the channel is rectangular) or a brush with a cross-section slightly larger than the diameter of the chimney (if it is round). The brush is moved intensively down and up, scraping off the soot. A layer of soot that is too thick and dense will have to be removed with a non-sharp scraper.

When all the work on the roof is completed, you can move on to removing soot from the furnace in the house. Cleaning begins from the top choke and moves down to the firebox and ash pan. Final cleaning can be done with a vacuum cleaner, which will remove all residue from the channels.

Since cleaning a Russian stove from soot is not always easy and possible minor damage on the walls of the chimney, after the procedure you need to inspect the condition of the chimney. If small cracks and chips are found, they should be covered with a clay solution.

Folk remedies and preventive measures

If the chimney is laid out correctly, and the fuel used is dry and of high quality, soot will not accumulate on the walls, so you will not need to think about how to clean the stove from soot, or you will rarely need to do this. A lot of soot is produced during combustion household waste and garbage, as well as pine firewood and raw wood.

There are several folk tricks on how to keep your chimney clean:

Before mechanical removal For soot, it is recommended to burn a bucket of dry cut potatoes or peelings. The released starch will soften the soot layer.
Adding salt to the fuel prevents the accumulation of soot on the walls. In addition, salt produces a beautiful flame.
Dry aspen firewood is considered the best remedy for cleaning the chimney from carbon deposits. The high combustion temperature and special gas help push out deposits and evacuate them from the chimney.

You can tell that a stove chimney needs cleaning by the color of the smoke coming out - it becomes darker and denser. At the same time, as the chimney lumen narrows, the color of the flame in the firebox becomes dark orange. If you notice any of these signs, you should immediately clean your chimney to avoid fire or poisoning. carbon monoxide. If you do not want or cannot do this yourself, invite a professional chimney sweep or stove installer.

How and how to clean the stove from soot with your own hands - effective means
How to clean a stove from soot with your own hands: how to clean a chimney, chimney cleaning, cleaning, how to clean a stove at home

Safe and long-term use of the stove is only possible if its internal passages and chimney are regularly cleaned. Ignoring measures to remove soot ultimately leads to a narrowing of the clearance in the chimney and incomplete or insufficiently rapid removal of smoke and combustion products. Sometimes soot deposits inside the pipe can ignite and cause a fire. The article below will discuss ways to clean soot from chimneys and stoves.

Chimney cleaning methods

Cleaning soot with chemicals

In this case, we are not talking about traditional immersion in the chimney, as chimney sweeps did earlier, but about cleaning the stove from soot using special chemicals. They are added to the main fuel and during the combustion process they release special substances that accelerate the decomposition and burning of soot build-up on the walls of the chimney.

You can purchase such products in the form of briquettes, liquid or powder. It is noteworthy that it is advisable to use these preparations not only for cleaning a dirty chimney, but also as a preventive measure to prevent the build-up of soot in hard-to-reach areas of the chimney that cannot be reached mechanically. Please note that before cleaning the pipe from soot with chemicals, you should read the manufacturer's instructions on the packaging.

You can prepare a similar composition at home from copper sulfate, saltpeter and coconut charcoal, collected in a ratio of 5:7:2. You need to take 200 g of the mixture and pour it onto the smoldering coals. The caustic gas released will corrode the soot seals.

Mechanical method of removing soot

Since cleaning a Russian stove from soot is not always easy and minor damage to the walls of the chimney is possible, after the procedure you need to inspect the condition of the chimney. If small cracks and chips are found, they should be covered with a clay solution.

Folk remedies and preventive measures

If the chimney is laid out correctly, and the fuel used is dry and of high quality, soot will not accumulate on the walls, so you will not need to think about how to clean the stove from soot, or you will rarely need to do this. A lot of soot is produced when burning household waste and garbage, as well as pine firewood and raw wood.

There are several folk tricks on how to keep your chimney clean:

Before mechanically removing soot, it is recommended to burn a bucket of dry cut potatoes or peelings. The released starch will soften the soot layer.
Adding salt to the fuel prevents the accumulation of soot on the walls. In addition, salt produces a beautiful flame.
Dry aspen firewood is considered the best means for cleaning a chimney from carbon deposits. The high combustion temperature and special gas help push out deposits and evacuate them from the chimney.

You can tell that a stove chimney needs cleaning by the color of the smoke coming out - it becomes darker and denser. At the same time, as the chimney lumen narrows, the color of the flame in the firebox becomes dark orange. If you notice any of these signs, you should get your chimney cleaned immediately to avoid fire or carbon monoxide poisoning. If you do not want or cannot do this yourself, invite a professional chimney sweep or stove installer.

The stove and fireplace are the main elements country house and dachas. They not only heat rooms, but are also used as decoration. However, over time, the chimney becomes clogged, which negatively affects the operation of the stove. And in the case of a fireplace, the smoke will come back and fall into the room.

The draft worsens, and the stove or fireplace becomes difficult to light. If you encounter a similar problem, you will have to clean the oven. There are several methods for this procedure. Let's figure out how to clean the chimney and pipe with your own hands.

Why does the chimney get clogged?

Chimneys often become clogged due to non-compliance with the technology of laying a stove or fireplace. When laying a pipe, it is important to observe the parameters of the internal clearance. If the dimensions are smaller than required, the chimney walls accumulate combustion waste.

As a result, a large amount of soot and soot is formed inside. This leads to a decrease in draft and to the fact that it becomes problematic to light and melt a Russian stove or fireplace.

The efficiency of a chimney is affected not only by brickwork, but also quality building materials. Poor quality materials lead to the appearance of cracks in the pipe, which violates the dimensions and geometry of the internal lumen.

The walls begin to gradually collapse. Be careful, as such defects cannot always be detected immediately due to the fact that they are hidden by soot.

Improper use of your chimney is a common cause of blockages. First of all, this concerns the use of raw fuel and firewood with a high resin content when lighting devices.

In addition, the operation of the structure is negatively affected by the burning of plastic, polyethylene and other similar waste. As a result, solution deposits form on the walls inside the pipe, which clogs the chimney.

In addition, foreign debris gets into the pipe, small insects and even birds. Therefore, it is very important to install a protective umbrella over the pipe. The soot and soot that form on the walls of the smoke exhaust structure not only complicate kindling.

A clogged chimney increases the risk of fires. Accumulated soot may spontaneously ignite! Therefore, it is important to quickly deal with the problem and the stove and clean the pipe correctly.

How to clean a chimney with a brush

Using a special brush is the safest and most easy way How to clean a chimney in a stove in a private house. It is important to choose the correct brush model in diameter and length, as well as a separate brush for chimney bends. By the way, it is in these hard to reach places ah soot and soot settles.

Choose comfortable brushes with a flexible handle and nylon hard bristles. It easily cleans a chimney from any material, quickly takes the required form, cleans every curve well and penetrates into the most remote corners of the device.

At the same time, the nylon brush does not scratch or damage the surface. By the way, the more scratches and damage there are in the pipe, the more soot accumulates inside the structure. For a fireplace, choose a long brush with two handles.

To clean the chimney with a brush, first of all, you need to prepare the room. To do this, cover the furniture with film and cover the windows with thick fabric material. Be sure to wear gloves, safety glasses and a respirator.

Wait until the stove or fireplace has cooled down, remove debris, remaining wood and other foreign objects from inside. Remove the damper from the chimney entrance and insert the brush inside, holding the product firmly by the handle. To clean the fireplace, the brush is inserted from below.

Thoroughly clean the inside surface on each side, making sure not to miss any hard-to-reach areas. Gradually move the brush further, removing soot, grime, dirt and cobwebs. After this, remove the accumulated debris and soot, close the damper and rinse the brush in regular warm water.

Remember that you can only clean the oven when it is completely cooled and empty! Be sure to use protective equipment during cleaning! Clean not only soot and soot, but also the cobwebs inside the pipe.

Other methods of mechanical cleaning

Instead of a brush, use a classic garden brush watering hose. To do this, a rigid hose is inserted into the top or bottom of the chimney. They make a few cleaning movements, and soot is already collected inside the device. For greater effect, you can attach a brush to one end of the hose, which is lowered into the pipe.

You can also scrape off soot and soot from the walls of the passage using brushes of various sizes, a cleaning rod, a weight on a chain, or a long pole. By the way, you can also attach a brush to the pole. It is important that the tool matches the dimensions of the chimney. It's more dangerous ways, as they clean the pipe from the roof.

To maintain safety, cleaning should be done in a windless, dry place. clear weather wearing gloves, a respirator and safety glasses. You can only clean the oven when it is cold and empty, with no debris or firewood inside.

There are also folk methods that have long been used to clean the oven. However, keep in mind that they are more suitable for prevention and do not allow debris and soot to accumulate inside the pipe or prevent soot from settling. Next, we’ll look at how to clean a chimney from soot using folk remedies.

How to clean a chimney using folk remedies

Salt is an old and proven method. Chemical substances, which contain salt, react with oxygen when heated. As a result, soot and soot will settle less inside the chimney, so this is more of a preventative measure. To do this, during the fire, pour a small amount of table or rock salt onto the burning fuel;

Potato peelings - effective method, which will help remove soot and soot from the pipe walls. To do this, take dry potato peelings or cut the potatoes into cubes and dry. You will need half a bucket of this product, which is poured onto hot coals. Hot steam settles on the walls of the pipe, after which the usual mechanical cleaning using a brush;

Aspen and birch firewood is an effective, but not the safest method. The wood is placed in the stove or fireplace and the fire is lit. In this case, doors, flaps and latches must be open! During the fire, new firewood is added. By the way, it is better to clean birch products from bark. As a result, the soot ignites and comes out of the pipe in white flakes. But this method is only suitable for chimneys that can withstand temperatures of 1,000 degrees;

Aluminum cans are an unusual and safe way to prevent soot from accumulating inside chimney ducts. To do this, build a hot fire with plenty of hard coal and burn the cans. For high-quality prevention, this procedure is repeated every ten fires.

Chemical cleaning

Today, manufacturers offer a special oven cleaner for cleaning pipes and chimneys. This is very easy, but not the most effective and economical method, since the soot will fall off only in some places.

Therefore, in the future you will have to clean the pipe with a brush. In addition, chemicals leave bad smell, which can only disappear after a few days.

Popular cleaning products are PHC, Kominichek, and Log Chimney Sweep. In addition, you can use a mixture of copper sulfate, saltpeter and crushed coke coal. Such preparations are placed on burnt fuel while heating a stove or fireplace.

When using these products, be sure to follow the instructions and do not exceed the dosage! Chemical compositions have quick effect and are not safe for humans, but the effect wears off within two to three months. And you have to clean the pipe again, which is expensive and not economical.

After cleaning using any method, be sure to remove any soot and debris that has spilled out. If you don’t want or are afraid to clean the chimney yourself, you can always turn to professionals!

It is necessary to clean the stove even if it is not heated for a long time, since various wastes still accumulate inside the pipe. Regular cleaning is the key to proper and long-term operation of the chimney. And the accumulation of combustion products reduces the performance of the device.

In addition, regular care and cleaning of the stove or fireplace chimney is important for human health. After all, due to soot and debris, dangerous carbon monoxide is formed in the channels.

The profession of chimney sweeps is not the most popular; people have become accustomed to dealing with blockages and large amounts of soot on their own. In addition, the development of independence is facilitated by a huge number of available methods deliverance brick oven and chimneys from congestion. Besides special means, craftsmen they invent their own rather extraordinary methods of combating soot, which is just what aluminum cans or potato peelings cost, but first things first.

Cleaning your chimney should be a regularly repeated task. Even the most innovative designs, consisting of expensive and cutting-edge modules, require careful maintenance. No matter how hard you try to reduce the amount of deposited soot, the appearance of soot cannot be avoided. If you heat the stove with wood, do not best quality, then the plaque can be impressive and difficult to remove. Amazing properties soot allows it to accumulate even on vertical, flat surfaces, hence the need to clean the internal walls of the chimney and stove. If it is not cleaned, it may result in a fire in the bathhouse or house.

Chimney sweeps are not in demand today, due to the fact that men do not disdain menial work and are able to clean everything themselves. However, it is also not worth talking about the disappearance of this profession completely. If the chimney has complex design, with a lot of bends, then you should still give preference to a professional.

There are two types of smoke: noble white and harmful black. Light is formed from water and logs, dark from soot and coal combustion products. White smoke is completely safe for the internal walls of the stove. From black you can notice the appearance of an unpleasant coating, it is especially noticeable on inside, since, unlike the upper glossy surface, the material inside the structure is slightly rough. As a result of the intensification of such a raid, the thrust becomes much less, and the amount of fuel burned decreases. You shouldn’t let the situation get worse, because it can lead to disastrous consequences.

Getting rid of soot is not difficult, because modern bathhouse lovers come to the aid of industrial chemicals and brushes specially created for this. To clean problem areas, it is not necessary to climb onto the roof.

We use a special brush

As in previous times, specialized brushes remain unrivaled. Not a single chemical
the remedy cannot compare with it. The only condition for success is that you need to choose it correctly. Here important role plays like a chimney. Suitable for each of them different models, and there are a great many of them on the market.

The first thing you need to decide is the diameter of the brush. It is impossible to clean the chimney with a large brush, while cleaning a small one will increase the time it takes to get rid of soot. Thus, properly selected brushes will allow you to clean the oven evenly along its entire length.

When choosing a brush, you don’t need to give preference to the first one you come across. Examine it carefully, understand what it is made of. A stiff nylon brush is ideal for removing clogs. Despite all its rigidity, it is able to adapt to the pipe and reach the most inaccessible places. The lint does not damage the surface, but at the same time thoroughly removes dirt.

For chimney bends, use a special brush. It will help you reach curved structures. It is the turns that accumulate a huge amount of soot, and getting rid of it is much more difficult than it seems at first.

Cleaning should be done with the utmost care. The fewer deformations and scratches that appear during the procedure, the longer the stove will serve you. Scratches and chips are uneven surfaces, and large amounts of soot and soot accumulate on them. That's why ideal option becomes a brush with a flexible handle. It is easier for her to reach the dirt and easier to control when cleaning it.

Traditional method: potato peelings

This method has been known for several centuries. In the absence of special tools, our ancestors came up with an amazing way to clean the stove.

To carry out the procedure, you will need an impressive amount of potato peelings. Today this may be a problem, but rural residents in the old days did not have such a problem. But you managed to collect at least half a bucket of cleaning. We heat the oven well and pour all the available wealth into it. The quality of cleaning depends on the size of the pipe; the larger it is, the more potatoes need to be destroyed.

The effect of this method is explained by the effect of evaporated starch on soot. Mixing in the pipe, the soot begins to decompose and within a few days actively falls off the walls. But it doesn’t fall off completely, so after a few days we tie a ruff to the brick and send it down the chimney pipe. Noise and loss of soot residues are guaranteed.

The second folk method: we use aspen firewood

The firebox with aspen wood is also not new way. However, unlike the previous one, it cannot be called safe.

At the beginning, a firebox with aspen wood looks like any other. We lay the material and melt it well. This firewood burns well, so constant flooding leads to high temperature. A great fire hazard lies in the fact that the oven doors must be open and firewood must be constantly thrown into them. Ultimately, this will cause the pipe to begin to hum, white soot flakes will fly out of it, and the soot inside will catch fire. When examining the pipe, you can see a flame from there.

Before carrying out such a dangerous maneuver, make sure that the design and material can withstand temperatures of 1000 degrees.

Method three: aluminum cans and hose

Burning aluminum cans A relatively new way to clean soot from a furnace. Once every five days, throw a couple of cans into hot coals. Please note that the cans must burn, so use hard coal. The cans will actually burn in it, producing very little soot, which means less clogging of the chimney.

Another existing, but very dubious method. You need to take the hose and insert it into the pipe from the firebox. The stiffer the hose, the better result. After this, all the soot should fall down. You can further strengthen the hose by putting a brush or a cut plastic bottle on it.

Fourth innovative method: chemicals

Chemicals are not designed to completely remove soot from your oven. They refer to
means of prevention. After using such products, the soot will fly off in some places, but this will still lead to the need to buy and use a brush. In addition, the chemical composition is not very attractive to consumers, since after use for a couple of days the oven retains a persistent synthetic odor, which worries consumers.

Having dealt with everyone possible ways cleaning, we can conclude that the most effective and in a safe way is a mechanical manipulation using a rigid brush with a flexible handle. Treat the stove with care, clean it of soot, and it will serve you for a long time.