Once upon a time the shop was the most important attribute village hut, monastery refectory, ancient garden. Today, benches and benches are installed wherever it is necessary to organize a non-bulky, but comfortable spot recreation. And if the owner of the site knows how to paint a bench or bench correctly, this furniture will become a wonderful design element and will serve for many years, without fear of precipitation, frost and sunlight.
Painting country furniture is an essential part of caring for it.
Garden benches are most often made of wood, metal, and their combinations. They are sensitive to atmospheric moisture, solar radiation, damage by insects and require protection from negative factors in the form of periodic painting and treatment with antiseptics.
Selection of painting materials
Offered range paint and varnish materials(LMB) is quite extensive, so making a choice is not easy. Many frost-resistant and moisture-resistant varnishes and enamels are suitable for outdoor use:
- alkyd enamels(for example, PF-115, Miranol);
- enamel on water based(Belinka Exterier Email);
- texture (glaze) compositions (Aquatex);
- wood oils (Woodex Wood Oil);
- yacht varnish;
- anti-corrosion paints for metal (Nerzhamet).
A bright bench looks great among monochromatic greenery
Among the variety of paint and varnish materials, you can select those that can be used for painting both wooden and metal parts– for example, enamel PF-115. Do not forget that wooden parts require antiseptic treatment before painting, and make sure to purchase the appropriate composition.
How to paint a bench yourself
Having picked up necessary materials, you can begin the process of painting the bench. Obviously, it makes sense to figure out how to paint a wooden bench with metal supports.
First you need to make several preparatory operations:
- disassemble the bench into parts, remove rusty fasteners;
- Sand the wooden parts, remove sanding dust;
- handle wooden elements antiseptic, let dry;
- remove paint and rust from metal parts with a wire brush;
- sand and degrease metal elements with solvent.
Once painted, this bench will be unrecognizable.
Having completed these steps, you can proceed directly to painting:
- After stirring the paint well, use a brush to paint one side of the boards;
- Turn the dried parts over and paint the other side;
- after drying, sand the painted surfaces with sandpaper and remove dust;
- apply 2 layers of paint to the boards;
- paint metal parts using anti-corrosion paint.
When all the painted parts are dry, all that remains is to assemble the bench by installing new fasteners.
Fragment of a painted bench
Examples of painting benches
When preparing to paint, you should inspect the place where the bench will be located and make sure that its design and chosen colors will be in harmony with the overall design of the area:
- if the bench is located next to a flower bed or other bright elements, a plain color in soft colors is desirable;
- for benches original design discreet colors are also suitable;
- V shady places A brightly colored bench or bench decorated using decoupage technique would be appropriate.
If you are seriously thinking about how to beautifully paint a bench, the photos below will give you some hints.
Classic green garden bench
The color of the bench almost matches the plant background
The original bench is a continuation of the hedge
Bright bench in a shady corner
Charming corner in Provence style (decoupage)
Features of painting benches in playgrounds
Various benches are an indispensable part of children's equipment. playgrounds. Even though the kids are “an eternal runner and jumper” inside, they still need a short rest from time to time in order to continue their dynamic games.
It happens that parents are involved in landscaping the territory of kindergartens where their children are raised. Then, together with the teachers, you have to decide how to paint a bench or gazebo on the site.
The main difference between children's benches (not counting the size) is their playful orientation and certainly bright, cheerful colors. Of course, for painting in this case you should choose environmentally friendly varnishes and paints. It is desirable that the selected paints and varnishes also have good wear resistance.
Examples decorative finishing children's benches - in the photographs below.
The simplest bench, bright, with a simple pattern
The fire horse can also serve as a bench
Crocodile...possibly Gena
This makes painting a bench easier than ever
It’s easy to see that painting benches and benches is a fun and not so difficult activity. But due to the huge range of paints and varnishes, when choosing them, it is advisable to get the opinion of a specialist.
With painting process country furniture can be found by viewing short video.
And here you can see how to decorate a country bench with decoupage.
– oldest item furniture that has become accessible to humans. A wooden snag, simply hewn a little with a stone ax and brought into a cave - this is the great-great-ancestor of all modern furniture, closer to which are wooden benches, which have not lost their relevance and demand - neither in the house, nor, especially, in landscape design.
Garden benches made of wood: choosing a style
It may seem only at first glance that the bench is far from being the most important element in landscape design, real professionals say that it begins with the bench and ends there garden design. Otherwise, what is all this effort and work for, if no one can enjoy and appreciate it?
That is why it is important to place the bench correctly, choosing a place from which the most beautiful and attractive view opens, and the bench itself can become an elegant accent that complements the beauty of the garden.
A comfortable bench in the garden will become a place where you can hide from the hustle and bustle, admire nature, read a book or listen to music, dream, or just relax. At the same time, wooden benches for a summer residence are a powerful and effective “weapon” landscape design, they can be used for zoning a site, marking boundaries, etc.
At the same time, garden benches differ in their functional purpose:
- front doors - they are installed at porch, at the entrance of the house. These are wooden decorative benches, richly decorated with carvings, they become a favorite place for photo sessions
- dining rooms - they are usually placed near B-B-Q, on terraces, in places where the family likes to dine outdoors
- garden - small benches, next to flower beds, flower garden or plot, it’s good to sit on them and relax while working in the garden. Usually it is very simple in shape, without decorations or aesthetic delights.
- relaxation - usually they are “hidden” in the most secluded corner of the site, away from strangers and even your own eyes, where the whole environment is conducive to relaxation. The main criterion is comfort, and you don’t have to be modest with the size - you can climb onto such a bench with your feet and even lie down
To make the bench comfortable, you should adhere to the following dimensions:
- optimal height– about 40-50 cm, while the legs will rest comfortably on the ground and rest
- seat width - about 50-55 cm. The seat is made with a slight inward slope - 5-12 cm, so it is more convenient to lean on
- back height – 35-50 cm
- backrest tilt - within 15-45 degrees
- if armrests (hand rests) are installed, then the optimal height for them is 15-20 cm, measured from the seat
Advice! When selecting material for a bench, preference should be given to wood that is especially resistant to moisture and decay - oak, larch, hazel, cherry. But teak is considered to be the “champion” in terms of strength; its wood contains natural resins that protect it from rot and insects (bark beetles, termites).
The choice of the shape and type of bench depends on both your preferences and the style in which the garden is decorated.
For country style, a bench that is as simple in shape as possible, natural in color or painted in a discreet brown shade, is suitable. For the Provence style - a slightly antique bench, quite modest in terms of decoration, painted in blue , white , violet or blue color.
- The bench must be periodically painted (opened with varnish). It is best to do this at the beginning of the season, before thoroughly cleaning the wood from any remnants of old paint.
- V hot weather the bench should be placed in the shade - not only you, but also the tree will be comfortable there - ultraviolet radiation negatively affects the quality of wood
- regularly check the fastening elements (bolts, screws, nails), if necessary, fasten them all the way, do not allow the structure to loosen
- If you notice traces of rot on one board, replace it immediately, do not let it spread further
When you visit the Casino X official website for the first time, you will definitely remember this platform by its unique design And large selection promotional offers. Experienced gamblers who know a lot about gaming software are happy to become guests of the resource. Everything you need is here comfortable game: licensed devices, bonuses, high level service. This is a serious long-term project that is successfully advertised on the Internet and provides a real opportunity not only to hit the jackpot, but also to withdraw your well-deserved winnings without any difficulties.
Virtual slot machines from Casino X of all genres
All professional resources that review Casino X note its very impressive range of games. More than 450 slots from more than 30 providers await you. The main part consists of developments from Netent and Microgaming. Basically, these are five-reel simulators of various genres: fantasy, history, stories from films and legends, fictional stories, sports, animals, treasures and, of course, fruit classics. For convenience, the top online slot machines are collected in a special section. Interesting game mechanics await you:
- free spins;
- cash bonuses;
- multiplication of rewards;
- Special symbols;
- accumulators and multipliers.
To the official website
The web resource also pays attention to tabletop entertainment and the Live category. To switch to paid bets, you need to create a profile in the system. Once the quick registration is completed, the player can top up his account. Immediately after this, you can start playing on the most popular slot machines. Most of the devices are adapted for gadgets with touch controls. On a smartphone, Casino X mobile version is slightly different from the format on a computer. There are no functional differences: you manage your bank and bets in the same way as on a personal computer.
Free game mode at Casino X online
Club clients do not have to look for where to download machines for constant access to demos. The browser version of the portal works around the clock, as does its technical support. The site is occasionally updated to better meet current quality standards. All guests of Casino X can play for free without registration under one condition - connecting a smartphone, tablet or computer to the Internet. Just click on the video slot you are interested in and start a test game in demo coins. The results of such spins or bets at the roulette or poker table will not affect the real balance in any way.
Unlimited access to Casino X official website
If for some reason the full version of Casino X does not open at your usual address, this problem can be easily solved thanks to alternative copies. For every client and ordinary guest, a mirror today serves as the most in a convenient way log in to your account and to the page with slot machines. The same licensed software with a full guarantee of specific algorithms awaits you. You will never lose your status and balance, since additional addresses with a similar interface and bonus features are constantly being added to the network.
Benches and benches in the country house and in the garden are primarily a place of relaxation. But just putting up a bench is not interesting. After all, you can create a beautiful corner. To not just relax, but to enjoy nature and the fruits of your labor. There are many interesting ideas. Moreover, the most simple designs such that these benches can be made with their own hands by any person whose arms grow from their shoulders.
Photos of original benches (ideas for cottages and gardens)
Everyone knows what ordinary benches look like—they’ve seen them more than once. But I don’t want the usual one - the simplest one. Especially if you have already started the process of decorating the site or are just planning it. Why not start from the bench? And then other decorations will follow. You just have to start.
In the garden or near the house I want to have more greenery: beautiful and different flowers. - that's good, but why not combine them with a bench.
What could be simpler? Two wooden boxes in which flowers are planted and between them a couple of planed and sanded boards. This bench can be placed near the wall, and a couple of long boards can be placed on the wall to create a backrest.
Not everyone likes flower beds made of wood: wood requires care, and without it it quickly loses appearance. It is especially difficult to care for a tree that is in contact with the soil. Instead of wooden boxes there may be, for example, stone or concrete pedestals.
It’s very easy to make such a bench at the dacha with your own hands. You can find ready-made concrete flower beds or do something similar. You can buy a processed board, or you can do it yourself. Instead of a board, there can be half a log - depending on the style of the site. It is easier to secure the seat using metal corner. It is attached to concrete using dowels, to wood - with self-tapping screws from below or through bolts.
If someone has large plants in durable flowerpots, you can implement the following idea. In this option, the bench covers the plants. To avoid surprises, flowerpots must be very durable...
There is a similar version of a bench made of boards and without plants: it may need to be placed on or in. The supports are made of boards of the same size, and the seat is made of timber.
Bench made of boards - a non-standard option
And more variations on the same theme: hollow ones are used as support building blocks. Treated bars are inserted into the holes. This is the seat of the bench. Just round the edges of the beam, or it will be uncomfortable to sit.
For this garden bench it is advisable to find blocks big size, with thick walls. If not, you need to securely fasten the blocks to one another. The whole task is to first secure the blocks (for example, with pins), and then attach the bars to them (with bolts or dowels).
Log benches
If your site is decorated in a rustic or ethno style, the standard approach will not suit you. It is best to use logs in this case - with or without bark - it’s your choice.
The seat for the bench is made of logs - a trunk of large or medium diameter sawn lengthwise. The back is either a smaller diameter trunk, or simply a cut closer to the edge. The legs can also be made from narrow pieces of logs (look at the photo below).
Log bench - quick and easy
The legs and seats are connected to each other with metal pins: a hole of slightly smaller diameter is drilled under the pin in both parts. The pin is driven into one of them, the second part is pushed in and is also driven in, but this time they hit the wood rather than the pin. To avoid leaving traces, lay a piece of unnecessary board and hit it with a hammer (or sledgehammer). Such a connection should be quite reliable, but to be sure, you can install two or three pins, or you can cut a little log, making a flat area on same size on both parts to be joined. By increasing the support area, you will increase the reliability of the seat fastening: after all, the log weighs a lot.
Bench option without backrest
Another interesting option in the “ethno” style is shown in the photo above. It is made in stone, but this bench can also be made from logs. The seat is a very thick board, the legs are most of the deck large diameter. A groove is cut in the deck for laying the seat. If you have a tool (you can make a cut with an axe, grinder or chainsaw), it’s easy to do.
Often in the countryside a work desk is needed. From a log you can make not only a bench, but also a table. A version of such an ensemble is shown in the photo. Only the tabletop is made of boards, all other parts are logs of different diameters or from halves.
A greater degree of processing is inherent in the next bench in the same style. The back, legs, and armrests are made of thick and not very thick branches, the seat is made of sanded and treated (barked and sanded) unedged boards.
The other bench was made almost the same way. Only the boards and branches are located in a different direction and the result is a different look. A DIY bench of this type does not require much skill. In this case, the more careless the work, the more decorative the result.
Wicker back - not often seen
You can make a rest area and a bench around the tree. The designs are simple, making the flooring is generally easy.
You can also supplement your recreation group. And you can put it above the bench - this is the “progenitor” of the usual arch - one of the types light gazebo. And to make the relaxation completely complete, you can do, or.
Made of metal and wood
Few people will install completely metal benches in their dacha. They, of course, can be very beautiful, but in the summer they heat up to incredible temperatures, and when it gets a little colder, you can’t sit on them because they are too cold. Benches made of metal and wood do not have these disadvantages. Legs and load-bearing structure made of metal, and the seat and back (if any) are made of wood. Moreover, there are also interesting shops in modern design.
Rectangles are welded from the profile, jumpers are welded to the side walls, on which the seat boards rest. Simple, stylish, reliable, functional.
In a more advanced form - with armrests, a backrest, soft cushions on the seat, such a design may look like in the photo. The wide seat turns the bench into a sofa, and pillows add comfort - covered with fabric furniture foam rubber. The tables are made in the same style - a frame made of corrugated pipe and a tabletop made of boards.
One important point: if you make a seat or tabletop from several adjacent elements, they do not need to be butted end to end. There should be a gap of 3-4 mm between adjacent boards/bars. The wood swells and shrinks. In order for the surface to remain relatively flat during these processes, a gap is required.
If smoother lines are needed - for families with children - you can bend the pipes and make garden benches and a table with rounded edges. This garden furniture is completely safe. An ordinary round or corrugated pipe is bent, leaving the sides in the shape of the letter “P” with a wide back. The length of this backrest is the length of the bench. For the table, the dimensions are made a little larger: the legs and back are longer.
Make two identical blanks for the table and bench. Next, cut the boards to equal lengths. For the seat, about 40 cm, for the tabletop, at least 55 cm. Fasten to the pipes with furniture bolts with a flat head. To prevent the caps from sticking out, drill a hole of a slightly larger diameter under them.
Benches made of boards
The largest group is benches and benches made of boards. There are designs that are more reminiscent of sofas, especially if you put soft pillows on them - and you can lie down.
Garden furniture in modern style It’s easy to assemble: rectangles with partitions made of thinner boards, connected to each other.
Even the usual design of a country bench can become exclusive if you approach it with imagination: instead of legs and armrests, wooden wheels. The result is a designer item.
A bench made of boards with a back and wheels instead of sides - looks interesting
And the simplest possible is a board with legs in the shape of the letter “X”. Such shops were built centuries ago, and you can still see them today.
From the boards you can make a bench in a modern style: in the shape of the letter “P”. With this design, the main task is to ensure rigid fixation of the legs and seat: the pushing forces are not compensated for in any way. In this case, it is important to take a thick board or timber so that it does not sag. You can place the board “on edge”: this way the rigidity will be greater. To increase reliability, you can install corners from below.
The photo shows an option with a 45° cut. Having a miter box or circular saw Accurate cutting is easy to achieve. By accurately joining the workpieces and fastening them, we obtain an angle of 90°. If the seat does not sag, it will last a long time...
An interesting and reliable version of the bench is shown in the photo below. The legs are assembled from boards different lengths: every second is shorter by the width of the seat board. Interesting idea. It is easy to make such a bench: it is important to maintain the dimensions, and everything is connected very simply: with nails into the face of the seat.
Original benches
It seems like there’s more that can be thought of... but it turns out there’s a lot. For example, attach the seat to a large stone.
Make a structure from bamboo trunks.
Or a stone.
Sitting in winter will be unpleasant, but beautiful...
How to make a bench: photo reports
We won’t make benches out of stone—not everyone has the equipment, but we can make them out of different pieces of wood. Let's talk about making simple but unusual designs. So that a handmade bench can be a source of pride.
Bench without back
The design is simple, but looks interesting due to the specific material. For the legs, timber with rounded edges was used. If you have logs small size, you can trim them on the sides. You'll get almost the same effect. THIS material is not so rare; the legs are assembled from it in an unusual way: the bars are laid flat on top of each other. This adds zest and appeal.
This bench without a back has a length of about 120 cm, a width of about 45 cm, and a height of 38 cm. You can round the edges of the beam using a cutter, or you can find a similar profiled one. It costs more, but it will be easier to work with: it is already well processed and is easy to connect.
Depending on the found cross-section of the timber, calculate the length you will need. Determine how many bars will have to be stacked one on top of the other to get the required height. In this case, 5 bars were used for one leg. Total 45 cm * 5 pieces - 2.25 m. Two legs required 4.5 m of timber. A board 40 mm thick and 90 mm wide was used on the seat. For the seat you need 5 boards 1.5 meters long. It turned out 1.2 m * 5 pieces = 6 m.
First we cut and process the boards for the seat. Their edges must be rounded. If not grinder or a router, you will have to work with sandpaper, but you can find such a board or arrange at a sawmill to have it processed for you and also sanded: much less work will. So, we cut the boards to the same length, sand them and varnish them (with or without tinting - your choice).
Place the bars for the legs one next to the other, aligning their edges. Using a square and a pencil, draw lines where the fasteners will be placed. The distance between the lines is 7-10 cm.
You can take metal pins, or you can make dowels - carved from wood. Holes slightly smaller in diameter are drilled for them; the depth of the hole is half the length of the pin. Then they are hammered into one part, and a second part is inserted into the same hole on top. The connection is reliable, but to be sure, you can add glue, although then the structure will turn out to be one-piece.
With a pin connection, the main task is to make the holes strictly one above the other so that the parts mounted on the pin give a smooth edge. We've done part of the work - we've drawn lines where we'll drill, now we need to measure the same distance from the edge. For this we will create a template. We take a piece of plank about 1.5 cm wide. We will drill holes at this distance from the edge of the bars. Having placed it exactly along the edge, we mark the places of intersection with the drawn perpendicular lines.
We will install the pins in a checkerboard pattern, so we will drill holes through one intersection. We also make holes on one block from different sides in a checkerboard pattern. In a similar way, using pins, the legs are connected to the seat: two pins for each plank.
Technologically, this type of connection is correct, but it is complex and requires a certain skill. It could be easier. Place all the bars one on top of the other, secure with clamps, drill through in two or three sets - in the center and along the edges, connect with a long pin, with washers placed under the head and nut. You can nail the seat strip legs to the legs assembled in this way with nails from above or try to make a pin connection.
The bench was made by hand. Finishing work remains
If you nailed the seat, take some wood mastic suitable color, add some very fine sawdust and stir. Apply this mixture to the joints. When dry, smooth it with sandpaper. Sand all parts smooth and coat with varnish or wood paints for exterior use (preferably not covering ones, but those that leave the wood texture visible).
Read how and with what you can paint wood. It talks about lining, but the painting techniques remain the same, and the compositions must be taken for external use.
DIY bench made from broken chairs
In any household you can find two old chairs. They should be the same and still strong enough. We disassemble the chairs, leaving the part with the back and legs. We connect the two backs using bars of a suitable cross-section.
For greater rigidity at the bottom, at a distance of about 20 cm from the floor, where previously the chairs also had jumpers, we make another frame with transverse crossbars. It can be used as a footstool or to store some things.
After sanding, we paint the resulting structure. This time the paint should be ordinary: different types of wood can only be painted over with covering paints. Apply with a brush or from a spray can.
All that's left to do is cut the seat to size from thick plywood (8-10 mm thick) and cover it with foam rubber and fabric.
Garden chair/bench made from pallets
Everything is useful on the farm. Even cargo pallets can be used to make garden furniture. Moreover, there is no need to disassemble them: we use one for a seat, and from the second we will make a backrest. You will only need well-processed planks for the armrests and bars for the legs.
In one of the pallets we strengthen the fastening points by inserting pieces of bars. Having inserted it, we fasten it with self-tapping screws on one side and the other.
From a timber with a cross-section of at least 100*100 mm, we cut four identical sections 80 cm long. We screw them in those places that we have just reinforced. We leave 20-25 cm on the legs. We fasten with four long screws - 150 mm and no shorter.
It is important to maintain verticality and leave the same distance on the legs. Then the seat will be level. If there are errors in height, you can try to file it down, but then you will have to cut it from the top too - so that the armrests are even. So try to screw it straight. Deviations from the vertical can only be dealt with by screwing the leg back on.
We attach a second pallet to the rear posts, and boards for armrests on the sides.
All that remains is to cut from furniture foam rubber piece and cover it with fabric. You can also make pillows for the back. If you are not going to process everything thoroughly, but make a loft-style chair, use sandpaper or a sander, sanding all surfaces until smooth. You can coat it with paint, giving the wood a dark color.
Drawings of wooden benches
Video lessons
Several videos on how to make benches with your own hands.
One of the attributes of a garden or recreation area on suburban area– a bench, sitting on which you can read a book alone or, conversely, spend a few fun hours with friends. How to make an ordinary bench comfortable and at the same time turn into an element garden decor? The solution is simple - a DIY bench for your dacha. Only your own exclusive creation will fully satisfy your personal aesthetic needs.
Before you start sketching or drawing a product, you need to think about its installation location. The material of manufacture also depends on this. For example, it looks good in an old garden with large branchy trees. wooden bench in a forged frame (as an option - a product made of logs on a stone base), and in a young garden - a light, even openwork bench in a romantic style.
Small bench white stands out in contrast against the dark green hedge
If you place it in a quiet secluded corner, near or surrounded by flowering flower beds, it will become a wonderful place of solitude and relaxation, where you can spend a few pleasant minutes alone after working out in the garden beds.
Old Brick wall, a bench made of grayed wood and flowers look mysterious and romantic
Often benches are an integral part of verandas, gazebos, summer areas for a picnic. In this case, there should be several products aged in uniform style. One example is garden table with two benches on the sides, where on a summer evening you can have a family tea party or play board games.
Deliberately rough and comfortable wooden structure - a table, two benches and an armchair
It is better to install the bench in such a way that it offers a view not of the neighbor’s fence or garage, but of a pond, flower garden, or. The surrounding picture should please the eye, and not remind you that you need to refuel your car or renew the paint on the gazebo. It is also appropriate to place benches on the playground, by the pool, near the front entrance to the house.
A bench by the pond surrounded by flowers and greenery is a great place for relaxation and reflection.
One of the best places is in the garden, near the beds. It is better if the bench stands in the shade, for example, under the spreading crown of a tree or under a canopy, since it is intended for resting from physical labor– digging, weeding, watering or harvesting.
Relaxing in the shade flowering bush– real pleasure
You can think about a decorative frame: a garden bench made by yourself looks good surrounded by low flowering bushes, specially arranged flower beds, on a small hill or on a platform made of natural stone or.
Preparatory work is half the battle
First you need to take a piece of paper and make a sketch or drawing of the proposed product. Even at this stage, questions may arise: what is the optimal height or how many legs should the bench have? Exist general standards which should be followed when drawing up the diagram:
- 400 mm – 500 mm – seat height;
- 500 mm – 550 mm – seat width;
- 350 mm – 500 mm – back height.
If you plan to create a product with a backrest, you should determine for yourself how the backrest will be attached to the seat. Depending on whether the bench is portable or not, the legs are planned: for a non-portable product, they are firmly fixed in the ground.
It’s easy to fix the legs of the bench: you need to dig holes the right size and fill them with cement mortar, lowering wooden parts there
From the drawing you can estimate how much material is needed for the job. Typically, a product of this kind requires a minimum of financial investments: there is always a lot at the dacha wooden blanks left over from the construction of a house or bathhouse, fasteners (screws, nails, bolts, staples), paints and varnishes for wood processing.
If you collect the leftovers wooden products and blanks from all over the countryside, you can come up with an unusual model
Found in the back room and necessary tool. If the main material for production is wood, you should prepare: a plane, a saw, a jigsaw, a hammer, sandpaper, tape measure and pencil.
Making Benches: Six Easy Projects
You can never go wrong by choosing wood for work - a material that is soft, pliable in processing and at the same time durable, capable of serving for decades. You can create elements from wood various shapes and size, figured inserts, voluminous and miniature details.
Project No. 1 – a simple bench with a backrest
If you have difficulty drawing up a sketch, you can use a ready-made drawing of a garden bench.
All parts are cut according to the dimensions in the drawing
This bench is traditional for city parks; similar specimens can be found at river stations, near theaters or shopping centers– in places where you have to spend some time waiting. The advantage of this option is the ease of preparation of parts and speed of assembly. To work, you will need thick beams for support (3 large and 3 smaller), bars or boards for the seat and back.
The color of the parts can be changed using impregnation or varnish of a darker shade
This model is portable - you can always move it to another, more convenient place. To ensure that it always stands level and does not wobble, when installing supports it is necessary to ensure the exact location of the parts - even a slight discrepancy will cause the product to skew.
At the end of the work - and this applies to any wood product located outdoors - all wooden parts must be treated with a special anti-mold impregnation or coated with varnish, which also contains protective components. Treated wood is resistant to moisture, lasts longer and looks like new for a long time.
Project No. 2 – classic style bench
This option is more thorough than the previous one. A bench with a rectangular seat and the same back looks great against the background of a house built from any material - wood, brick, stone.
Assembly diagram of the armrests and backrest of a bench in a classic style
For variety, you can change the color, choose a shade closer country houses. The back of such a bench is a real find for those who like to imagine and translate their ideas into wood. Straight vertical bars can be replaced with slats arranged crosswise.
Several people can easily fit on this bench
The upper horizontal crossbar would look good if covered with elegant carvings or colored designs. Armrests and legs can also be figured - but it all depends on the desire and skill of the master. It only takes a few evenings to make such a bench for your dacha, but you can enjoy relaxing on it for more than one year.
Project No. 3 – table with benches
A garden set for relaxing with the whole family consists of a comfortable table and two fixed benches.
A convenient and practical table with a couple of benches will be useful in any country house
All large parts (table, benches) are assembled separately, and then assembled into a single whole using 4 lower bars - 2 on each side.
Assembly diagram of the entire kit
The table is a tabletop with legs mounted crosswise.
Table assembly diagram
The benches are assembled easily, from bars or boards of various lengths.
Bench assembly diagram
On last stage First, the benches are fixed - to give the structure stability, then - the table, exactly in the middle.
Initial assembly - connecting benches
Simple in appearance, but comfortable table will become a gathering place for family and friends in the evenings - for communication, evening tea, and relaxation.
This table with benches can be placed directly on the lawn
You can download more detailed drawings and photos of this project.
Project No. 5 – video master class
Variety of materials, shapes and styles
Wood is a traditional, “warm” material for making benches, which is why products made from it are so different. Instead of machine-processed bars, you can take natural material natural forms - and before us is not just a bench, but a real masterpiece.
The original bench is made from large pieces of sawn and processed logs
It turns out that there are also stone benches, but they are valued not for functionality, but for aesthetics. You only want to sit on a stone piece in the warm season, but you can admire it all the time.
A small stone bench fits harmoniously into the floral landscape
They look refined and elegant, but only a professional blacksmith can create a garden bench with his own hands from metal.
A wrought-iron bench among the riotous colors looks more than appropriate
Combined benches and benches, built of stone and wood or decorated with textile items - capes, pillows, look interesting.
Small pillows in pink and white, neatly laid out on a bench, make the garden corner cozy and homey.
That's all for today. We hope you found something useful. If you have any questions or suggestions, you are welcome to comment.