A useful DIY garage tool. How to make useful DIY projects for the garage with your own hands? Homemade carriers for the garage

For the rational use of space, communications and do-it-yourself garage accessories from scrap materials are used. It is necessary to use walls and an underground level in the process, place machines inside the room, and organize normal lighting.

Homemade gadgets for the garage

For comfortable operation of a room intended for car storage, you should adhere to certain recommendations:

• the tool must be as accessible as possible;
• storage spaces equipped with shelves/racks are much more convenient;
• workbenches, inspection pits, homemade machines and do-it-yourself garage accessories expand the capabilities of the car owner;
• the cellar allows you to save space;
• The productivity of work and minor repairs depends on the quality of lighting.

Organization of work space inside the garage

Depending on the dimensions of the building, the area occupied by equipment, fixtures, and communications should not be more than 10–20% of the size of the garage floor.

Storage areas, racks, workbenches

In 80% of cases, do-it-yourself garage fixtures are built to store accessories, tools, and vehicle equipment. It should be taken into account that the most bulky parts of the car are sets of winter/summer tires, depending on the season.

Tire storage rules

It is more convenient to store wheels on brackets of the following design:

• two triangular frames from a corner, connected by jumpers from any rolled metal;
• triangles are attached to the wall, wheels are installed perpendicularly load-bearing structure, slightly falling between the jumpers.

Wheel storage brackets

This is the most economical option storing tires in the off-season. The most popular among car enthusiasts are straight and corner workbenches. The lower space is usually filled with shelves or drawers; sharpening machines, vice.

Homemade garage workbench

An example of organizing a corner workplace

A folding workbench can be very convenient

Tree - universal material for both workbenches and shelving

It’s easier to build a wooden workbench yourself, but it has a shorter lifespan than its rolled metal counterpart, which needs to be welded. If in load-bearing walls During construction, corners for shelves were not included; it is easier to make racks from rolled metal or lumber.

Homemade garage shelving

Use for glass bottle racks

Built-in wardrobes are very compact

Original hanging shelves are suitable for storing long items

The design and arrangement of shelving inside each garage is too individual to follow general recommendations.

Inspection pit and cellar

A necessary accessory for a DIY garage is an inspection hole. Moreover, the owner does not have to carry out all the repairs himself. Underground communications can be used in the following cases:

• inspection of chassis, steering, brake system before a long trip;
• oil change, which allows you to save money and does not take much time;
• minor repairs that can be carried out by the owner's qualifications.

Inspection hole in the garage

It is more convenient to make the entrance to the cellar from a hole, as this will allow you to concrete several steps instead of using an extension ladder.

Cellar under the garage

The main nuances of these designs are:

• swelling of clay soils is harmful to underground structures;
• therefore, all elements of the pit and cellar are insulated from the outside with expanded polystyrene;
• sand or crushed stone is used in the underlying layer before concreting and backfilling of the pit sinuses;
• Drains are laid along the perimeter of underground structures at the base level to collect and drain water.

The width of the pit should allow the driver to enter it without lighting.

Lighting and ventilation

Parallel circuits are more often used in garages lighting fixtures. One lamp allows you to use a specific area, several devices are turned on during a major renovation or a visit to the cellar. Minimum consumption electricity is provided LED lamps. Daylighting devices have a great resource.

Cars use toxic, harmful fuels and lubricants, so do-it-yourself garage ventilation devices that allow you to create air exchange are becoming relevant. The influx is organized from below:

• garage - vents in the masonry, protected by bars;
• cellar - pipe from the garage or from the street.

Ventilation of the garage and cellar underneath

The hood is mounted under the ceiling of the cellar, garage roof, or has the form of vents in main walls at the highest points.

Related article:

Ventilation in the garage with your own hands. From this publication you will learn why garage ventilation is so important, what air exchange schemes exist, and installation nuances.

Other useful ideas

Useful accessories for a garage with your own hands can be made from used dishes, equipment, and materials left over from construction. For example, by gluing the lids of plastic cans horizontally/vertically, the owner receives convenient transparent containers for equipment or hardware, which are always at hand.

Device for storing small parts, tools, hardware

Interesting rack for storing screwdrivers made of PVC pipe

Homemade machines

From power tools you can assemble homemade machines and accessories for the garage:

• drilling - a drill fixed with clamps in a device that moves with a gear along a rack;

Drilling machine from a drill

• cutting - an angle grinder clamped in a similar way with equipment for metal or wood;

Angle grinder cutting machine

• wood lathe - the front headstock is made of a drill, the back headstock is made of a chuck, mounted on a frame made of a square pipe.

Drill lathe

The advantage of the machines is more accurate positioning of the equipment relative to the workpiece. The equipment turns out to be dismountable, the drill and angle grinder can be removed and used for their intended purpose.

Related article:

Metal lathe for the garage. Types of machines specifications, design, review of popular models in a special publication in our online magazine.

Hydropress

The simplest design hydraulic press obtained from a car hydraulic jack. To press out/press in bearings and press/compress parts, you will need to build a frame and a removable movable stop. The frame consists of 4 channels welded to each other. At the top, the structure is reinforced with stiffening ribs (kerchiefs), and at the bottom, transverse corners are added, giving the frame stability.

Do-it-yourself hydraulic press from a jack

The stop is pulled in the normal position to the top crossbar of the frame by powerful springs. A hydraulic jack is installed between them, pressing the stop against the lower crossbar of the frame as necessary. The press force is regulated by a jack, the dimensions of the working area are selected depending on the size of the workpieces.

And finally, a few more examples of useful things for the garage.

Shelving near the ceiling

Pockets for storing cutting discs from disposable plates

Device for convenient use of threads and ropes

PVC pipe cuttings - perfect material to create convenient storage spaces

Convenient pull-out racks for storing tools

Interesting DIY projects for the garage

Over time, a finished “motorhome” acquires a large number of tools. Conventional homemade products for the garage bring practical benefits without overpayments. Any machines made by yourself will not be inferior in quality to their factory counterparts. Let's look at some devices.

Knife sharpening device

Thus, the useful device receives a hole for the rod in the bolt. The rod is made by hand from thin wire. The carving is made taking into account the length of the sharpening bars.

The bar clamp can be created from:

• organic glass;
• ebonite;
• saw clamp.

The upper part of the plate acts as a clamp. The surface with two drilled holes is applied to the frame. Then, closer to the knife, the general through hole. The thread is cut in the frame.

So, the homemade do-it-yourself device is almost ready. The second hole is made only on the plate away from the knife. Then cut a thread for the bolt (needed for tightening). A simple homemade mechanism for the garage allows you to sharpen knives on the go.

The artificial diamond stone is affordable and very wear-resistant.

Pulley for adjusting the speed and load on the machine motor

• metal;
• PCB;
• plywood (something between wood and metal).

One small and two larger circles are cut out in plywood with a jigsaw. The center of the molds must correspond to the diameter of the shaft. To avoid problems with further manipulations, the circles are glued together or seated on a screw and tightened with a nut.

The parts of the useful device are tightened with screws. Then the pulley should be processed sandpaper or with a file, placing the structure on the drill chuck. The finished machine fragment can be additionally polished.

1. Avoid vibration, make sure that the center of gravity is on the axis of rotation.
2. You can make a toothed pulley. Small channels are made at the central circle before all stages of assembly.
3. If necessary, a small pulley can be made from a thick piece of plywood (one circle). A groove is made in the mold and the part is placed on a screw. A narrow file is applied to the rotating circle.

Do-it-yourself vacuum molding of sheet plastic

• top and bottom frames;
• molding plastic;
• coupling bolts;
• perforated MDF;
• opening for the vacuum chamber;
• plywood base with a hole in the middle.

A hole is made in a piece of MDF or plywood (50 by 50 cm) for a PVC pipe with a three-inch diameter. A frame of beams (30 by 30 cm) is attached to the resulting base with glue. To obtain tightness, all cavities are sealed with sealant.

edge water pipe one end is glued to the base, and the other is connected to the vacuum cleaner hose. The entire structure stands on legs.

Certain holes are cut in the upper and lower frames to accommodate the vacuum chamber frame (firmly glued to the base). Along the perimeter of the frame, cavities for fastening elements are made at equal distances.

Types of thermoplastic plastic used:

DIY jigsaw

1. A steel square with a bolt soldered into it is made with your own hands as a file holder block.
2. The improved block is soldered to the previous saw holder.
3. Attention is paid to the desktop. Plywood is chosen as the base. The narrow table area is the same size as a jigsaw.
4. Mounted in the front plane of the table furniture legs, a small wooden stand is fixed to the rear plane of the working area.
5. To create leverage, use only hard wood.
6. The lever hole must be created slightly larger than the diameter of the pin (it regulates the spring tension).

Described homemade craft should stand on a “sole” that will not interfere with the work process. If necessary, a corner is cut in the area of ​​the base plate.

Do-it-yourself set of cutters for artistic turning

A semicircular grooved chisel-cutter is used for rough turning. The part is made from strips of tool steel.

A universal cutting device used for finishing parts. The tool is made from standard straight chisels.

Shaped cutters:

chisel-scraper.

a tool based on a straight chisel with one-sided sharpening levels the surface of cylindrical workpieces;

a homemade device helps to fill threads and apply decorative marks to a wooden rod.

Cutting tools for soft wood (aspen, linden) have a smaller sharpening angle compared to the sharpening angle of a device for processing boxwood, oak, and birch.

Homemade extension cord with two sockets

The “branded” extension cord reel is made from two plywood disks that are bolted together. The fragments are separated by a duralumin tube and washers.

On one side of the reel, the bolts are recessed to ensure contact with the handle without injury. On the other side, two holes for sockets are drilled at a certain distance. Socket boxes are attached with screws.

Proper storage and use of the tool

Each pipe is attached to a plywood plate with self-tapping screws through a slot. To prevent the pipe fragment from becoming loose during operation, pieces of glazing beads are glued under the sides of the holder with PVA glue.

When it is necessary to hang the holder on the garage wall, the handle is inserted into the holder tube. The handle post fits tightly into the slot and is fixed. With this additional equipment, the coil is mounted on the ceiling or on the bottom of the shelves.

In order for the extension ram to rotate easily, a small handle is mounted on the edge of the device disk, which consists of tubular sections of various diameters. A larger diameter pipe is placed on a smaller hose and firmly fixed with a flat screw.

DIY crafts for the garage: the best ideas with photos

Useful homemade products for the garage with your own hands

Most often, during the initial arrangement, all the necessary furniture is ordered. But if you rent a room or don’t want to take money out of the family budget for this, then you can easily arrange it on your own, especially if you know how to hold basic tools in your hands. To help yourself and for inspiration, you can use the video from homemade products for the garage with your own hands (YouTube can please you with a variety of ideas), and you can also take into account tips on arrangement, which will be the basis for a successful layout.

If you look at the photo that shows the optimal set of useful furniture elements, you will notice useful nuances for yourself. First, the location of any storage system must be located at a certain distance from the walls. It is believed that there should be at least half a meter between the machine standing indoors and the rack for normal, comfortable work inside. If the shape of your car storage is more like a rectangle rather than a square (this happens quite often), then it is worth moving all the storage for tools and useful things to one area along the far wall opposite the door. This is where you can place not only a table or shelving unit, but even a carpentry or lathe with maximum convenience. It would be worth mentioning that all storage of your tools should be located inside the garage only if it is securely closed or is protected by a tightly closed gate in the country. Otherwise, it is better to place there only the most necessary things, preferably those that are not of particular value to robbers.

If you plan to install windows yourself in a separate room, which is located on the territory of your suburban area, then it’s better to make them the so-called attic type, that is, located in the roof, and choose a place just above such a working area. In summer and spring period This arrangement of windows will help you save on lighting, there will be enough sunlight for all types of work, and besides, you will also be able to ventilate the room, because ventilation cannot always cope properly, especially if you are going to work inside, like in a workshop.

If you have a total shortage of money or out of love for art, you can make an original storage system using old empty cans. Any motorist accumulates quite a lot of them over the course of a year, and if you ask your fellow neighbors, there will be enough for each compartment. interesting cabinet. Of course, there is nothing complicated here and to perform such homemade garage DIY video-lessons are not needed at all. You need to take plastic canister, wash it well so that no traces of its contents remain. Armed with metal scissors, a knife or other tool, we cut off the front cover of the canister, but so that the sides remain and the contents do not fall over the edge. To make the structure more stable, you can fix it on the back wall using self-tapping screws, but we will, of course, drive them not into the wall, but into a wooden strip, which we attach with dowels.

Do-it-yourself garage crafts photo

The same option as shown in the photo can be used in homemade projects for the dacha, where you also often need to set up a workshop, and even less space is allocated for it than is left in the garage. For such a design you will need to build a frame from wooden planks, and make notches along its upper and lower edges where the cells will be inserted. Most likely, the inspiration for this design was the classic hives that are used for breeding bees; the system here is exactly the same. The sheets that are inserted inside have a perforated surface and the presence of these small holes will allow you to screw nails inside, hang hooks to hang tools and useful devices as conveniently as possible so that they do not fly off when pulling out and retracting.

Exactly the same perforation can be included in a furniture set. Having such a complete set of everything necessary for home handyman, you can build many useful homemade products for the garage with your own hands, video with whom you are online. In popularity, such resources may soon overtake popular hand-made projects, because men, no less than women, want to make the space around them, their kingdom, beautiful, functional, and comfortable.

Interesting DIY crafts for the garage

We are used to either simply throwing away tires that are completely worn out, or making crafts from tires for the garden with our own hands. Having spent last winter's set on a swan or a flowerpot, this year you can easily allocate it to your loved one by making an entire furniture set. Frankly speaking, for this purpose you will need not only car tires, but also bicycle tires, because they can be used to construct backrests, turning a stool into a chair.

Practice making such furniture and soon you will be able to replace your coffee table with such a table in your living room with your own hands; crafts made from tires not only look beautiful, but can also become part of an original design concept.

A table and chairs are great; there will be somewhere to sit, but with the question of what to cook a delicious kebab on, our next idea will help. The fact is that an ordinary folding barbecue may not maintain the required temperature of the coals for a long time, and if you like to sit near the fire for a long time, you should make something larger. We will slightly modernize crafts made from wheels for the garden and present to your attention a barbecue made on the basis of a wheel rim. In order for the rim to maintain the set temperature well and not allow the coals to cool, it needs to be lined with bricks, but for maximum decorativeness of such a homemade product, it is better to file them a little using a grinder to fold them in a circle. The bottom must be covered with any available material that does not support combustion, for example, fine crushed stone.

Homemade products for the garage with your own hands drawings

If you plan to spend quite a lot of time in your makeshift workshop, then among those you are interested in DIY DIY for the garage - heating, lighting, ventilation, that is, the arrangement of a fully comfortable stay inside for a long time. Some people prefer to install infrared heaters, but from the point of view of the cost of electricity this will not be a very rational option. A good option might be water heating, but it is best designed in garages that are located next to a residential building.

You can place solid fuel boilers of any design inside any type of garage, even make your own potbelly stove out of metal using a welding machine. But do not forget that with this type of heating, the interior decoration must be made of non-combustible materials, and the ventilation must be done efficiently, even at the stage when we are building the roof with our own hands, in order to promptly remove all combustion products from the room.

DIY homemade machines for the garage

If you have a need for some specific work, then you can use special machines, for example, a pipe bending machine, which can be useful not only for motorists, but also for motorcycle owners.

DIY Garage Tools - Turn your camper into a home workshop!

Required tools and materials

Any car enthusiast can make a variety of garage accessories with his own hands, using inexpensive materials and the simplest tools. Such homemade crafts by a home craftsman turn a motorhome into a full-fledged workshop.

Garage workbench – it’s hard to live without it!

If you plan to do independent maintenance of your vehicle in the garage, as well as perform a variety of renovation work and make your own crafts, it will be difficult to do without a workbench. It is usually made of wooden boards, which are mounted on a reliable base (profiled metal pipe or thick wooden beam).

It is also possible to make a desktop from metal blanks. They are easy to cut to the required sizes and assembled into one durable structure using steel angles and hardware (universal screws, screw connections, bolts, etc.) or using a welding machine.

Manufacturing of wooden or metal workbench always start with drawing up a detailed design drawing. You must correctly assess the workspace of your garage and fit the desktop into it as harmoniously as possible. It is advisable to provide shelves and drawers (pull-out) on the workbench. They will allow you to keep all kinds of tools at hand. It is recommended to install a small vice on the tabletop.

Making a metal workbench

If your garage has shelves or racks (or you want to mount them), experts advise installing a workbench next to them.

Then you will get an excellent work area where you can do any home creativity, producing original and useful homemade products for home.

1. Assemble a tabletop from boards with geometric parameters suitable for you (for example, 200 by 10 by 5 cm), connecting wooden crafts between each other with metal ties and good glue. For a standard workbench suitable for any garage, it is enough to take 20 of these boards.
2. Make special grooves on the tabletop (on the 5th and 16th boards) for the stops. The parameters of the grooves are 2.5 by 2.5 cm.
3. After the glue has dried, the tabletop must be planed so that a perfectly flat working surface is obtained.
4. Use 80 x 10 x 10 cm bars to make legs for the workbench. Grooves should be provided in the front supports. You will insert brackets into them, which you will then connect to the beam (longitudinal).
5. Assemble the base of the table from two frames made of 10 x 5 cm boards and fix it to the support. The frames are cut into the legs of the workbench by about 2.5 cm, and then they are secured with bolts.
6. Attach to the resulting structure supporting walls(back and side). They can be made from centimeter plywood or chipboard sheets.

Now you need to connect the top frame to the tabletop. This operation can be carried out without problems using bolts. Don't forget to apply drying oil to the made wooden workbench and coat it with varnish. On such a table you will make any crafts with special pleasure!

A shelving unit is a must for the garage!

Over time, any vehicle owner’s motorhome turns into a kind of warehouse where a variety of items and tools are stored. They all need to find a convenient place so that each device is easy to find. A self-made rack allows you to efficiently organize the storage of tools.

You can make such a structure from metal and wood. In the latter case, use solid wood - beech or oak. Shelves and drawers made from them can withstand quite serious loads. Rack by accepted standards must maintain a pressure of at least 150–160 kg. At the same time, it is not recommended to load home-made structures with things that generally weigh more than 500 kg.

Wooden shelving

Let's see how you can quickly make a garage shelving unit while spending a minimum of money on purchasing materials. The work flow diagram is as follows:

1. Take a 9 cm wide board and cut it into pieces different sizes(18–30 cm). We will use these segments as supports for the rack.
2. Make the shelves from a thicker board - 19 cm thick. To do this, you will need to cut it into pieces of the required length.
3. Mark the board for the base of the structure, indicating on it the locations of the spacers (they are usually spaced 2.5–3 cm from the edge of the base). Now you need to attach (it is advisable to use construction adhesive) the top spacer and nail the top shelf of the rack to it (with regular nails of suitable sizes). Then repeat these manipulations with other shelves and spacers. At the very last resort the lower expansion element is attached.
4. Turn over assembled structure, tighten the base of the rack with spacers using screws.

The structure for storing various tools and things is almost ready. You just need to sand the rack and then apply an oil varnish to the wood (it’s better to do two layers), and then attach it with anchor screws homemade design to Wall. The places where the rack is attached to the wall are under the lowest and highest shelves.

Useful technical homemade products for the garage - a press and a cyclone vacuum cleaner

A homemade clamping device, which is sometimes impossible to do without in home-made projects, is very simple to make. You will need:

• hydraulic jack;
• metal platform bed;
• profile pipes with a cross section of 6x6 and 4x4 centimeters (two pieces of each will be required).

The press is done this way:

1. Attach two vertical guides (4 by 4 cm pipes) to the base of the structure.
2. Weld between them (at the very top) a piece of pipe 6 by 6 cm.
3. Install another 6 by 6 cm pipe so that it moves without difficulty along the mounted guides.

Homemade garage press

The use of such a technical homemade product is elementary - you place it on work surface press the products you want to connect, cover them with a thick plywood sheet, lower the jumper pipe with the jack placed on it. You only need to apply pressure to the jack to glue two products or your own crafts together for centuries.

But with the help of the following homemade product - a cyclone vacuum cleaner, you can always restore perfect order in the garage. It is made from thick plastic or (which is better) from a metal container. It must be sealed. Homemade manufacturing scheme for effective cleaning garbage in a motorhome is as follows:

1. Make two holes in the lid of the container. Place the first one at the edge, the second one in the central part. The diameters of the holes must correspond to the cross-sections of the hoses that you will connect to the device. One hose is connected to the hole from the edge, it is intended for collecting debris, the other is needed to connect a regular vacuum cleaner.
2. In the inlet pipe of the described homemade product you need to install a plastic elbow. It will ensure the process of swirling (cyclonic) air in the tank. Due to this elbow, the effectiveness of such a homemade product increases, which easily and quickly absorbs small stones, lumps of dirt, sawdust and other solid contaminants. All of them will collect in the tank that you connected to the vacuum cleaner.

Device for making strong rope from plastic bottles

When heated, the material from which bottles are made mineral water and various drinks, is capable of shrinking. This gives us the opportunity to make excellent rope out of such containers. With its help, you can very firmly connect various parts and assemblies in a motorhome and in the household in general.

Rope made from a plastic bottle

To make a device for making homemade cords, you need to stock up on two bolts with washers and nuts, metal washers, a piece of thin board or plywood, a utility blade and an electric drill. We make the device like this:

1. Place two washers in the middle of the board or plywood and mark their centers.
2. Drill holes in the marked centers with a drill.
3. Drill holes with reverse side(this is a mandatory procedure to ensure that there is no twisting or rotation when using the device).
4. Screw in the bolts.

The use of this craft is simple. You need to put several washers on the protruding areas of the bolts (their number determines the thickness of the rope being cut). Then place the washers on top stationery knife(you can even use a piece of it) and strengthen the structure by installing a few more washers and tightening the nuts until they stop. After that homemade device must be secured with clamps to garage workbench or other work surface.

Next we take plastic bottle volume of two liters, cut out the bottom, cut a strip (very small) of the required length and place our “blank” under the knife. You need to pull the tape with one hand, and hold the container being cut with the other. From one 2 liter bottle you will get about 25 linear meters of excellent rope with high shrink characteristics.

Under the tool - useful homemade products for the garage with your own hands

I live in the city of Veliky Novgorod, our plant produces containers, they produce drainage EP and EPP. For any city, this is very useful thing. Since these drainage units are needed for draining oils, oil, and fecal waste. I learned a lot on the site useful information, quality, dimensions, purpose of drainage containers. The NOVZERO company provides us with various containers for water towers and air collectors. You can order everything in Veliky Novgorod, there are numbers for orders. This company also provides a guarantee, services, such as equipment installation and more. Every city should have such factories and such products. novzero.com www.novzero.com/produktsiya/emkosti-ep-i-epp

№15 Homemade devices for garage

DIY garage accessories

Homemade garage gadgets #tools

Homemade machines. DIY machines

Things #8 you can't live without in your garage, do it yourself

DIY hydraulic press

#15 Homemade gadgets for the garage

Under the tool - useful homemade products for the garage with your own hands

DIY garage accessories

DIY tools for the home workshop and garage

Homemade tools for the garage, ROLLING JACK

The garage is the holy of holies for any car enthusiast. Almost every man who is the proud owner of a garage spends perhaps more time in it than at home with his family. Car enthusiasts and craftsmen use these types of premises for work, repairing cars or other equipment, producing furniture or various useful things for the home, as well as just friendly get-togethers with friends. To make their garage as comfortable and functional as possible, men are ready to do anything. In this article we will give some interesting ideas on how to make it yourself and thereby simplify your leisure time in it.

First you need. In order to properly equip a garage and rationally use all of its rather small space, you can use the following garage homemade products:

• Racks or stands along the entire length of the wall;
• Shelves (closed or open type);
• Tables with cabinets;
• Oversized drawers or shelves for storing large items;
• Hooks and hooks for hanging items;
• Secret drawers or shelves;
• Lockable drawers;
• Metal frames for storing spare wheels and replacement tires;
• Steel mesh;
• Inspection pit for car repair;
• Cellar or basement for storing vegetables and canning.

Now let’s look at how to make some of the listed crafts in the garage with your own hands.

Shelves

Such convenient devices as shelves can, of course, be made from wooden boards and metal fasteners. Or you can use the life hacks of other car enthusiasts - make shelves for storing nails, screws, bolts and nuts from plastic bottles:

• If you need open holders for all sorts of small things, then you need to cut the base in half plastic jar or a small bottle without touching the threads. Then the thread must be screwed into the lid of the container and glued or screwed outer side caps to the wall so that the cut part of the bottle faces up. As a result, the remaining part of the container will serve as a kind of holder for various kinds of things.
• The same small parts and materials can also be stored in closed plastic containers. To do this, you just need to glue or screw their lids to the shelves below so that the jar is in a vertical position. When you need to take something from the container, you just need to unscrew it from the lid.
• Any household or building material can serve as a shelf in the garage. So, for example, trim sewer pipe or cardboard cylinder, mounted on the wall or under the ceiling, can be used as an excellent place to store long items. And the halves of plastic plates screwed to the wall will serve as convenient pockets for grinder discs.

Shelving

In order to store tools, things and various accessories of the owner of the garage, it is advisable to equip it with a large and durable rack. This kind of homemade work in the garage can be done in several ways:

• The most reliable is a rack made of metal and wood. Steel rails provide a strong base and support for wooden shelves. Shelves made of steel will be even stronger and more durable.
• You can also make a shelving unit with your own hands for your garage entirely out of wood. For this you will need a medium and thick board (19cm). It is necessary to cut supports for the rack from the middle board, and to make shelves from the thick one. All parts of the structure must be secured with screws, and its surface must be opened. oil varnish.
• The most budget-friendly homemade products for a garage in the form of a rack can be made from 50x100 timber, 50x25 boards and plywood. The timber in this structure will act as legs, boards as transverse guides, and plywood as shelves.

Attention! You should not place tools and things whose total weight exceeds 500 kg on a DIY rack. This kind of useful homemade product for the garage is designed to withstand a weight of up to 200 kg.

Boxes

One of the “Kulibins” became the author of such an invention as boxes in the form of cut-off plastic canisters. If you carefully cut off the side wall of the canister and place it with the opposite side on a shelf, then such a container can easily turn into a drawer with a handle.

Storage frame winter tires and wheels. Such a frame can be equipped with metal corners. The corners must be connected to each other using any rolled metal product. If you are planning a hanging frame for wheels, then you must first build two triangles from the corners, which will later be connected by two more corners. The connecting corners will act as wheel holders, so the distance between them should be such that the wheels do not fall into it, but only sag a little. If the idea was to make a standing rack for wheels, then a rectangular frame is simply made from the corners.

Other homemade products

Here are a few more homemade things that you can build in the garage with your own hands:

Let's hope that thanks to the photos given in the article, useful tips and instructions, you can easily build homemade products with your own hands for a garage or other utility room.

Absolutely anyone can make accessories for their garage with their own hands. With the help of such products, the owner of the premises will free up a lot of space, and tools and equipment will always be at hand.

A workbench is a necessary product in every garage

A homemade workbench should be in every garage. It does not take up much space and makes it possible to comfortably carry out repairs and make useful crafts. Usually the workbench is made of durable wooden planks, which are attached to the thick wooden beam or profiled pipe. Often workplace made from steel billets. They are quite easy to cut and fasten into one robust construction using metal corners and universal screws.

To make a workbench, as well as other machines for the garage, you need to draw an accurate design plan. At the same time, take into account the space that will be allocated for the product. It is best to place the structure next to shelves or racks. In the drawing, indicate the presence drawers and shelves. You will store small fasteners and tools in them. You can also attach a compact vise to the tabletop. Having drawn up a plan, start making the workbench. First, we assemble the tabletop.

If you have a small room, then there is no point in making a large homemade product for it. You can connect the boards together using good glue and metal ties. As a rule, the tabletop of a standard workbench consists of 5–10 identical boards. Next, we make special grooves measuring 2.5x2.5 cm on the tabletop. They are needed for stops. As soon as the glue on the product has dried, the surface must be planed. The result should be a perfectly smooth coating. The legs for the structure can be made from several bars measuring 80x10x10 cm.

We make grooves in the front legs into which the brackets will be inserted. In the future, the latter will be connected to the longitudinal beam of the tabletop. Then we assemble the base of the underframe. It consists of two frames, which are made from 5x10 cm boards. The base is attached to the support, after which the frames are cut into the legs of the workbench by 2.5 cm. At the end, we secure the components with bolts. Then you need to attach the back and side support walls to the workbench. For their manufacture, sheets of chipboard or centimeter plywood are taken.

The last step will be connecting the tabletop and the upper frame. To do this, you should use powerful bolts. Afterwards we apply drying oil to the surface of the workbench. As soon as it dries, we treat the surface with varnish. As a result of the work, you received a stable structure on which you can not only repair spare parts or make various crafts, but also store tools.

Making a rack - about a complex design in simple words

Every driver probably has a lot of large garage equipment that there is no place to store. Where can you find a place for them so that you can quickly find the right tool? The correct answer is on the rack. This design will allow you to organize free space and save a lot of time. Similar devices for the garage can be made of wood or metal. The second option is more reliable, but it is quite difficult to implement it yourself.

The first one is much easier to do, however, in order for the structure to last for a long time, it is worth choosing strong wood species for work. Beech or oak are perfect for this. Boxes and shelves made from them can withstand significant loads. In principle, the norm for a rack is the ability to withstand a weight of 150–180 kg. In practice, only a few adhere to these recommendations. However, it is definitely worth remembering that the maximum weight of all tools on the rack should not exceed 300 kg. Otherwise, this design will become dangerous for the garage owner himself.

Making a rack with a complex design is very difficult. It requires significant effort, a lot of time and equipment. It is not much inferior to a simplified product, the manufacturing algorithm of which we will consider in more detail. So, the operating procedure is as follows:

1. 1. First you need to take a board 9 cm wide and cut it into pieces of different sizes. In the future, these parts will play the role of supports for the structure.
2. 2. For shelves you will need to take a thicker board. It must be cut into several identical parts.
3. 3. Next, take a board for the base of the rack and mark on it the points at which we will make spacers. They should be located at a distance of 3 cm from the edges of the base.
4. 4. Attach the upper spacer using superglue. We nail the top shelf to it. The same manipulations must be repeated with other spacers and shelves. The bottom expansion part should be attached last.
5. 5. Then you need to turn the assembled product over, tighten the base of the rack with spacers, using screws for this.

After the work done, your rack is almost ready. At the end, all you have to do is clean the surface of the rack with sandpaper and treat it with oil varnish. It is best to apply the latter in 2 layers. Attach the structure to the wall with powerful anchor bolts, screwing in fasteners under the upper and lower shelves of the structure.

Cyclonic vacuum cleaner and press - useful homemade products for those who like to tinker

The list of homemade machines and devices must include a press. This clamping device will become an indispensable assistant for every DIY enthusiast. To make the press you will need a hydraulic jack, a metal platform frame and 4 profile pipes. Two of them should have a cross-section of 4x4 cm, and the rest - 6x6 cm. To make a press, we take two pipes with a smaller cross-section and attach them to the base of the product. At the very top, between these pipes, we weld another pipe with a larger cross-section.

Install the remaining pipe so that it can easily move along the previously installed guides. The device made in this way works on a very simple principle. To connect two products, they need to be placed on the base of the press and covered with a thick plywood sheet. The pipe with the jack installed must be lowered, and then the two short pipes must be turned. By making this simple movement, you will securely connect the two previously supplied products.

Second device - cyclone vacuum cleaner, it will help you always keep your garage perfectly clean. To make it, prepare a plastic or metal container. Important nuance– the lid of the vessel must be tightly closed. Next, we make 2 small holes in the lid. The first should be located in the center, and the second close to the edge. The hole diameters and cross-sections of the hoses you use must be the same. We connect the pipes to the holes. The first will serve to collect garbage, and with the help of the second you will connect a regular vacuum cleaner

Install a plastic elbow into the inlet pipe. With its help, air will be sucked into the device, like a cyclone. Thanks to the presence of this elbow, the vacuum cleaner will be able to suck in not only dust, but also small stones, sawdust, lumps of dirt and other small debris. All this will remain in the container to which you connected the hoses. If you wish, you can not equip the vacuum cleaner with a knee. But in this case, you will not be able to remove garbage, only dust. In such a device it is most advisable to use plastic container and narrow hoses. If you need a more powerful device, then you should make a vacuum cleaner from large hoses, an elbow and a steel container.

Device for making ropes - ropes from plastic bottles

When heated, plastic bottles shrink quickly. Thanks to this, we are able to make fairly strong ropes from them. With their help, the garage owner will be able to connect several various products which are used on the farm. To create the device, you need to find two bolts with nuts and washers, a piece of thin board, an electric drill and a utility knife. After that, take two washers and place them in the middle of the board. The centers of the washers should be marked on the board with a marker. We drill holes at the resulting points.

Next, drill holes on the back of the board. This must be done to prevent rotation during operation of the device. On next stage screw in the bolts. We are testing the device. We put several washers on the protruding ends of the bolts. The final thickness of the rope will depend on the number of bolts. Next, place a stationery knife or a small piece of it on top of the washers. We secure the device with additional washers screwed in until it stops. Next, the device must be fixed on the desktop using clamps.

Then we take a two-liter plastic bottle, cut off its bottom and cut a strip in the remaining part. We place the latter on the device so that it is located under the knife. Next, we take the strip with one hand and pull it, while holding the plastic container with the other hand. As a result, from one unnecessary 2-liter bottle you will get about 20 linear meters ropes.

How to make a viewing hole - detailed instructions for beginners

Whatever one may say, sooner or later the car has to be repaired. And so that the car owner does not have to crawl under the car and “squirm”, bending double, it is necessary to dig a hole in the garage floor for inspection and repair. First of all, those who want to do this need to mark the area of ​​the room where the car is parked. To do this, the area of ​​the garage is marked with chalk. When creating markup there are several things to consider: important factors. The length of the pit must correspond to the length of the car, and another 1 meter must be added to this value. The width should be such that it is comfortable for you to work. However, be careful - this value should not be greater than the distance between the wheels of the car.

The depth of the hole is calculated taking into account the height of the garage owner. Another 20 cm is added to this indicator.

“Having taken measurements”, start digging a hole. Once you've done this, think about the arrangement inside. First of all, this concerns the walls of the pit. For this purpose, brick, building blocks or concrete can be laid on the sides. The thickness of the walls directly depends on the material. So, if you use ceramic bricks, then this figure should be equal to 20 cm. If you purchased cement, then the wall thickness should be 12 cm. If you want to make walls from blocks, then their thickness should not exceed 22 cm.

Do not forget that the walls of the pit will require hydrophobic impregnation. It will protect materials from moisture. Impregnation must be applied with inside bricks or blocks. To make entry and exit more comfortable, we make steps in the front part of the pit. It is best to use cement for this. You need to start from the lowest step, gradually rising higher. Each of the staircase elements must be the same. To achieve this, first measure the height of the rise and calculate the number of steps.

Shelves in the room - for storing loose fasteners and more

Sometimes the garage space does not allow you to make and install a large, spacious shelving unit. In this case, you can make shelves of different sizes. They will be attached directly to the walls at any height convenient for you. This will make it possible to save space on the floor of the room. First of all, you will need to determine where the shelves will be fixed. On the selected section of the wall we make approximate markings, dividing the area into equal squares. Dowels will be screwed into the corners of these squares to hold the shelves.

To screw in the fasteners, drill holes for them using a hammer drill. If possible, it is worth purchasing special dowels with hooks at the ends - they will provide better fixation of the products. Next, we take a thin board and attach hangers with eyes to it. When calculating the distance, be guided by the markings you made on the wall surface. To secure metal hangers, use reliable self-tapping screws. After that, all that remains is to make the shelves. We take several boards and cut them into equal parts - they will serve as bottoms for the products. Then we cut out the walls of the shelves from thicker boards. We nail or glue them to the bottoms. If desired, the products can be painted or varnished.

The final stage will be the installation of finished shelves in the designated places. When installing each of them, carefully ensure that the products stand level and move freely along the guides. If you want, you can glue turned wooden handles to the front walls of the drawers. It will be more convenient to use the shelves with them. Very interesting idea will be making shelves from plastic canisters.

If you have a sufficient number of these containers, and in the future you do not plan to use them for their intended purpose, then you can use them according to this principle. First, we cut holes in the outer walls of the canisters. At the same time, make sure that only the right or only the left wall of each container is cut off. Otherwise, the shelves will look inorganic. After cutting out the outer walls, clean the plastic from burrs. To do this, use a file. After this, all that remains is to install the shelves in place in the wall or use them as drawers in the shelving unit.

For a true car enthusiast, the garage is a second home. Or even the first one. Therefore, everyone tries to take its arrangement and equipment seriously. The functionality of every square centimeter of space is also very important. This will allow you to work in a spacious room, and tools and spare parts will be stacked and arranged correctly and in perfect order. As for the arrangement in everyday life, we won’t talk today, but today we will try to save on equipment.

What should be in the garage

In principle, there is no such device that cannot be bought. True, not everyone has the opportunity to spend tidy sums on purchasing Bosch equipment; by the way, it is useful to look through catalogs with Bosch or Intertool or Interskol equipment. The young but playful company Jonesway and the same company, repainted from green to brown, Ombra, have great experience and capabilities in this regard.

The catalogs contain a sea of ​​excellent working equipment, devices and universal pullers, mandrels for all occasions and, of course, tools that are difficult to look at without a stingy man’s tears. But the cost in catalogs is unreasonably high, as for a private owner. Service stations, of course, are in more favorable conditions, they earn money with equipment and God himself ordered them to have best tool. Otherwise, such a master is worthless.

Garage mechanic's wish list

Still, it’s worth making a rough list of what should be in the workshop, and then choose from it yourself. Here's what everyone would like to see:

1. A lathe, small, but with a minimal set of functions. Naturally, you won’t be able to make it completely yourself if you don’t have a strong and accurate frame. The price from a Chinese manufacturer will be no less than 23-28 thousand rubles. It is dangerous to buy domestic ones - many factories simply assemble equipment from Chinese components.
2. Drilling machine. A useful thing when you need to perform precise drilling or minimal milling work. It can be made, and they are inexpensive. A stand for a drill costs 3,000 rubles if you buy a ready-made one, and a fully functional drill costs 20-30 thousand.
3. A hydraulic press is an indispensable thing if you have to deal with shrinkage or pressing out of bushings, sleeves, and bearings. It is built on the basis of a hydraulic jack.
   
4. Emery. Necessary thing. Threading a tool, sharpening a drill, adjusting a part to size, sharpening a spatula or knife is a universal device, so it’s better to buy a high-quality sharpener, which can cost 3-4 thousand, depending on the options. And the options can be quite useful. For example, a flexible sleeve for turning a sharpener into a full-fledged drill for grinding or manual milling.
   
5. Racks, shelves, boxes for storing tools and accessories.

This should be an approximate set of additional equipment, not counting welding, two or three grinders and two or three drills and screwdrivers of different power.

Homemade devices

Universal homemade machine can become an elementary frame for an angle grinder. There are a lot of applications, it can be made from anything, even a durable wooden frame. it will become useful in cases where it is necessary to process small detail carefully and with both hands, without clamping the part in a vice. Of course this design has limitations, but as a small grinder or cutting machine, she will work with an A.

We do not indicate the sizes; the designs and sizes of grinders are different. The photos show the essence of the device, and it is not difficult to assemble. It’s worth working on attaching the grinder to the frame so that it can be quickly and securely fastened and quickly removed. This device is especially valuable for angle grinders with adjustable speed.

As a base we use a suitable size chipboard sheet, which is mounted on hinges, as in this design, or on latches, you can use a screw fastening.

Drawing of a small lathe, which is presented, may be useful for those who occasionally have to deal with turning work, but there is no point in buying a tabletop one. This project, of course, will not satisfy those who need high accuracy and high spindle speeds, but it is suitable for minimal turning work. Instead of a spindle made from an M10 bolt shown in the drawing, use a ready-made spindle or a drill chuck.

Designed for processing wooden and plastic parts, the diameter of the part is up to 50 mm, and the length is up to 200, but can be revised if necessary. If we take it as a basis, then replacing wooden base for any rolled metal, we get something similar desktop machine for metal turning.

Various small items are often folded in plastic buckets and boxes in the form of a kind of assortment. Therefore, finding the right small tool, drill or nut is quite problematic. Jars for mustard, mayonnaise and other products with metal or plastic cover, which is firmly attached to the can.

To organize convenient access, you will have to sort through everything, separate the cutlets from the flies, the 10-point bolts from the 6-point nuts, and sort everything into jars. The covers are screwed to shelves or any horizontal surface, and now finding the necessary fasteners will not be difficult.

Magnetic containers can be used for horizontal storage of loose fasteners. Convenient thing. The fasteners will not fall apart, they are always visible, and containers can be arranged as space requires. The main thing is to fix the thin magnetic tape in the right place, and glue large metal washers to the bottom of the containers themselves.

More creative ideas, which come to the minds of inventive craftsmen regarding the organization and storage of tools and accessories, we have shown in the photo. Use your imagination and reinvent the wheel. And your garage will be the ideal place for comfortable repairs of your favorite car.

A garage is a second home for car enthusiasts. This building serves not only to shelter the car in bad weather, but also as a place to store all kinds of tools; it is often a “mini-workshop” for the owner, where almost any repair can be done. Each owner arranges his garage to suit himself. Some people do not take the equipment of the room very seriously, and it begins to bring more problems than good. But still, most car enthusiasts try to adhere to certain requirements that are important to fulfill for more convenient maintenance of their car. So, arranging a garage with your own hands requires meeting certain requirements.

Primary requirements

Arranging a space for a garage means that it will be warm and dry enough.

Your car should not freeze even in very severe frosts. If possible, you can provide a system for quickly warming up the garage.

It is very important to reliably protect the premises from unauthorized entry. When setting up your garage, remember that access to tools or equipment that will be located in the garage should be as convenient and simple as possible. Therefore, it is better to think in advance about the location of storage areas.

In general, these are only the very minimum requirements that it is advisable to take into account for your own comfort. You can also add and equip the garage as you wish additional funds for repair and maintenance of your car. A workbench with tools and an inspection pit can be an excellent addition to the equipment of the room.

How to install racks and shelves

For the most comfortable arrangement of a garage, quite a lot of space is required, and this is often a problem. Storage of work tools and equipment also takes up quite a lot of space. Therefore, when arranging your garage yourself, try to accommodate as much space as possible for shelves or cabinets, but so that they do not interfere with free movement around the room. Shelves can be hung anywhere where you won’t catch or hit them, above tables, windows, shelving, and so on.

The distance to the car when hanging shelves on each side should be at least 1 meter.

Quite often it is convenient to equip the wall that is furthest from the gate for a variety of shelves and equipment. This is where the main working tools, compressor, workbench, etc. are located. Everything is at hand and does not interfere with moving around the room.

Plenty of shelves in the garage are a big plus, but it's also worth considering a small cabinet to hang things in. work clothes and put away some rags.

How to properly arrange a viewing hole

Question about presence or absence inspection hole quite individual. First, you need to decide how high the need for arranging such a pit is. There is no point in equipping it if you often use the overpass on the street.

If you decide that you need such a pit, then you must take into account that the walls and bottom must be concrete. The edges of the pit must be reinforced with iron corners. It is also worth considering how and how you will cover the inspection hole when not in use.

A drainage hole is needed in the corner of the pit; all the water that accidentally falls down will be collected in it. The hole must be made of such a size that it is convenient to scoop out the accumulated water. To avoid accidentally stepping into a hole while repairing a car, it must be covered with a grill.

In the pit you can place small equipment that may be useful for repairs; you can prudently make niches in the walls so that it is convenient to put the tools you are using. Also take care of lighting the inspection hole, install a lamp or arrange a place for a portable lamp.

Necessary equipment

For routine wheel changes or disc replacement, carrying out the most ordinary work Under the hood of the car, a standard set of tools and a jack are enough. But to perform more complex work, special equipment is needed.

Crafting table

To make a workbench, it is best to use wood and metal. Work area It is best to cover it with a piece of metal, protecting the wood from rapid wear. It is better to make a workbench in two or three levels in order to arrange as many necessary things as possible.

For ordinary body repairs, you will only need a welding machine with either tungsten electrodes, which are in a protective gas environment, or a carbon dioxide machine, which welds metal with wire.

Such a device is used to purify the air from vapors, drops of oil, water and other small particles that may be present in it. This is a very convenient device used when painting a car, and helps to distribute the paint evenly over the metal.

Washing

Of course, we are not talking about professional washing. And just about one that everyone can equip in their garage. To do this, you will simply need to connect a hose or pipe to supply water to the garage and drain it into the sewer. However, remember that electrical wiring and lighting will need more careful protection.

High-quality ventilation and lighting

It is very important to create high-quality ventilation in the garage; it will not only rid the room of unpleasant and harmful odors, but also protect it from the formation of dampness and excessive dust.

Ventilation holes are usually made on both sides of the gate on low altitude and covered with bars. The same holes are made on the opposite wall, but already under the ceiling.

Of course, the best lighting is natural, so if possible, you should consider having a window. If this is not possible, then make several lighting zones: above the work area, general and portable, which can be used to illuminate the most necessary things.

Video

An example of arranging a garage inside can be seen below:

Photo

Also, to equip your garage, you will need to buy metal cabinets for tools, shelving, workbenches and other garage equipment that will fit into the interior of the garage.

Return