Items from eggplant. Crafts from plastic bottles

Original taken from pervakov in How to do it: Useful things from plastic bottles

From plastic bottles you can make almost anything, from sprinklers and bracelets to a three-story pavilion.

You just need to use your imagination, you need to find the number of plastic bottles (which is not very difficult nowadays), and of course, get the right tools that will help you achieve the desired result.

Let's start looking at several options for products made from plastic bottles.

Cosmetic bag made from a plastic bottle

1. To make a handbag, you first need to prepare two 5-liter plastic bottles.

Cut these bottles as shown in the picture. Pay attention to the fact that the cap is cut as low as possible to the bottom of the bottle, where the plastic field is thick and elastic.

2. Prepare your thread and hook. To make holes like those in the picture, you can use an awl, soldering iron or punch.

The holes should be approximately 7 mm apart from each other and from the edge.

3. Let's start making the handle. You need to align and make holes in the lid.

4. Now tie the resulting blanks.

5. Sew with a double stitch. The first seam should be laid along the edge of the knitting, and the second in the holes.

6. Sew on a handle to make it easier to open and carry the purse.

7. If you want to hide the zipper joint, you need to sew a tied plastic strip on the back, the width of which should be 1 cm, and which should have holes in the middle.

8. To make a cosmetic bag you need to prepare a pattern. You can use templates or draw by eye.

9. All parts of the cosmetic bag, not counting the sides, must be folded with their concave parts facing each other.

10. Place the pattern under the plastic and press it with a ruler. Next, make the holes. A template made of thick cardboard that you can put on top of the work can help you. When you make holes around the edges, you will have bulges of plastic that you can simply cut off with a knife.

11. When all the parts are ready, crochet everything. This needs to be done completely with the bottom and top, and for the rest, only the side parts. Then sew.

12. The top and bottom need to be tied. Knit 2 double crochets in the spaces between the parts. Next, fold the bottom. Sew on.

13. All that remains is to attach the zipper, install the tied strip on top and sew on the lid. You can decorate the box according to your taste.

DIY glass holders made from plastic bottles

You will need:

1.5 liter plastic bottles

Iron tray

Napkins

Brush

Pencil

1. Cut off the bottom of a plastic bottle

2. Place the iron tray on gas stove and heat it up. When it warms up, place the cut bottom of a plastic bottle on it. To ensure smooth and rounded edges, twist the tray in different directions.

3. Place the bottom of the bottle on a napkin and circle it, while moving 0.5 centimeters from the edge.

4. Cut out the napkin and peel off its top layer.

5. Now you need to coat the bottom with glue.

6. Insert the napkin into the bottom and spread it out carefully.

7. Apply glue and varnish with a brush on top of the napkin - for decoupage.

8. Allow the product to dry and harden.

DIY handbags made from plastic bottles

Such bags can be used by children to store pencils, construction sets, etc. Adults, in turn, can use these bags to store clothespins, cookie cutters, etc.

You will need:

Plastic bottle

Eyelets

Ribbon (can be replaced with lace)

Candle (can be replaced with a needle with a plastic top or an awl)

1. Prepare a plastic bottle and cut off the top (choose the height yourself).

2. To make holes on the same line, you can use an elastic band. The holes can be made with a heated needle or awl and their diameter should be about 2 mm.

2. Define right size top, which will be made of fabric. IN in this example The width of the fabric is 26 cm + 2 cm allowance, and its height is 15 cm (including allowances).

3. Now you need to iron the folds (1 cm at the bottom, folded twice at the top by 0.5 cm and 3 cm - this is done in order to hide the raw edge).

4. Install the eyelets and stitch the top edge.

5. We make a side seam. To do this, you need to step back exactly 1 cm from the edge. If you pay attention to the image, you will see that the bottom is rolled up. It must be stitched in unfolded form. Next you need to iron the seam.

6. We attach the top to the plastic bottle. First turn the top inside out and then place it on the bottle. This must be done so that the folded edge can pass exactly under the holes. Then you need to lift it, and the ironed fold should be 1 mm below the holes.

7. Lift the fabric and thread the string through it.

Master class from plastic bottles. Mobile phone holder.

You can also make a good and very useful holder from a plastic bottle. mobile phone. You need it when you urgently need to charge your phone, you find an outlet, but there is nowhere to put the phone.

Prepare a 0.5 liter plastic bottle and pierce a hole with a knife to further cut unnecessary part bottles.

Using scissors or a utility knife, cut out a circle for the fork.

All that remains is to insert the cord from the charger and plug into the outlet.

Master class from a plastic bottle. Chandelier.

You will need:

50 plastic bottles (volume 0.5 l)

Flower wire

Regular wire

Bulb

Spray paint

Glue (preferably a glue gun)

Scissors

Stationery knife

1. Prepare plastic bottles and remove labels from them.

2. Cut each bottle into the shape of a flower (see picture). To do this, use a stationery knife.

3. Spread the "petals" of the flowers.

4. Once you've completed steps 1-3 with all 50 bottles, it's time to paint them. Use spray paint or you can take a little more time and paint each flower acrylic paints. You can choose any color. You can also vary the colors by making some flowers one color and others another.

5. Make a circle out of regular wire. Wind the jute and use glue gun glue it to the wire. You will have the base of the chandelier to which the flowers will be attached.

6. Using floral wire, attach each flower to the circle you made from the wire.

There are two ways to attach floral wire to a flower: wrap it around the neck, or glue it.

This is what the first layer looks like.

7. Repeat all steps to make several layers. In this example, 3 layers were made.

8. Use jute to attach the chandelier to the ceiling (see picture).

What you can do from plastic bottles. Waterer.

Simply make holes in the cap of a plastic bottle with an awl or nail.

Products made from plastic bottles. Funnel.

Plastic products from bottles. Money box.

1. Prepare a plastic bottle. Rinse it off hot water with soap and leave to dry.

2. From colored cardboard, cut out details such as ears, eyes, snout and nostrils.

3. Use glue or double tape to attach all the parts.

4. Wrap the bottle with patterned paper.

5. For the legs, you can use empty spools that need to be glued to the bottle.

6. Make a cut at the top for coins.

We make a dispenser for plastic bags from a plastic bottle

You will only need one 3-liter plastic bottle in which to store your plastic bags.

Simply cut off the bottom of the bottle so you can slide the bags in, and the neck so you can carefully remove one bag at a time.

You can sandpaper make the edges of the bottle smoother.

Making bracelets from plastic bottles

You will need:

Plastic bottle

Adhesive tape (the width of the bracelet depends on the width of the tape)

Double-sided tape

Felt (or other material)

Scissors

Stationery knife

Decorations

1. First, wrap some adhesive tape around the bottle. Make several "rings" as shown in the picture. Everything needs to be done carefully and evenly, since it is the tape that will determine how smoothly you can cut the bracelet out of the bottle.

2. Using a utility knife, carefully cut off each ring.

3. Carefully remove the adhesive tape.

4. Glue double-sided tape to the resulting plastic bracelet.

5. Prepare two felts different color and cut out parts from them different sizes. Carefully glue each piece to the double tape on the bracelet.

6. Use scissors to cut off any excess parts.

7. Start decorating the bracelet the way you want. You can use beads, sparkles or make flowers.

It is very beautiful and very easy to make such curtains.

Just prepare several plastic bottles and cut out the bottom of them - you will get a shape resembling a flower.

Make several holes in each "flower" using a heated needle.

Prepare fishing line or strong threads and connect all the “flowers”.

The product can be hung on a window or in a doorway.

You can also make a hole in the middle of each “flower” for LED bulbs, and you will have a beautiful glowing garland.

You can use bottles of different colors, or use spray paint to give it a different look. various colors product.

Irrigation from plastic bottles for the garden

You will need:

Plastic bottles 2 l

Awl or screwdriver

1. Using a knife, make two small cuts at the base of the bottle and two more in the middle. Also use an awl to make two small holes in the bottom of the bottle.

2. Pour water into the bottle to check whether the water seeps out quickly or drips gradually, ideally you want the water to drip and not flow.

3. Dig a small hole in the ground where irrigation is needed and insert a bottle with holes into it. Next, fill the bottle with water.

Photos of products made from plastic bottles

Frame made of plastic bottles (video)

Products made from plastic bottles. Three-story pavilion.

What to make from plastic bottles for the garden and cottage

Unnecessary things that, unfortunately, litter in abundance today environment, can serve successfully building material and accessible material for all kinds of crafts, the main thing is to have enough imagination, desire and basic skills in handling available tools.

You may be surprised to learn what a huge variety of crafts there is - from elementary little things to quite presentable and comfortable furniture– can be made, for example, from used plastic bottles from mineral water and drinks! With the widespread use of such containers, craftsmen paid close attention to them, effectively and often ingeniously using the characteristic shape and strength-plastic properties of the material. Separate caps from these bottles also provide many opportunities for creativity.

Fantasy manifests itself well with experience, and experience, as everyone knows, is a gainable thing. We invite you to take advantage of the available developments craftsmen: repeating them with my own hands, you will definitely have your own unique ideas, which, with the development of skills in working with simple tools like a construction knife and hot glue, you can perfectly implement in the material and make it an example for other novice DIYers to follow! Therefore, if you don’t yet have an exciting (and, importantly, useful!) hobby, it’s time to turn to a plastic bottle. And we will help you with advice and ideas for the first, and not only, crafts.

Tools for crafts from plastic bottles

The main advantage of such a hobby is its outright cheapness with enormous creative possibilities. All you have to buy is convenient and high quality construction knife, a hot glue gun, an awl, scissors and, perhaps, a sheet of the finest sandpaper: this will be enough to start with; in the future you may need paints and some other materials that will also not put a significant burden on your personal budget. Much can still be found, as they say, underfoot and near nearby garages - wire, colored cable insulation, etc. Over time, a useful ability develops to notice the necessary objects where an ignorant person simply would not notice them.

An important advantage of used plastic bottles is their absolute safety for health, unlike old ones. car tires. The material of the bottles does not cause allergic reactions, it is very difficult for them to get injured.

Preparatory stage of working with plastic bottles

At first, one or two bottles of the same type will be enough; for more ambitious projects, however, much more will be needed, and this the main problem, which requires time and some effort to solve. Excellent options are to involve relatives and acquaintances, friends and classmates in collecting plastic bottles, who, instead of throwing them away, trash can, will collect them for you. The process of collecting bottles suitable for creativity is reminiscent of preparing the right types of wood by a master cabinetmaker, who must have enough suitable material in stock.

Stewardship trend household waste V Lately is becoming increasingly popular, especially for plastic containers. From plastic bottles you can make almost the entire country house interior and more with your own hands. One of the main advantages of this material is long term service, and it is also very elastic. Don't forget that plastic bottles are... available material, which is always available to every owner or hostess.

Cheap and cheerful - we make flower beds from bottles

Plastic containers are ideal option for , since it has big advantage before wood and even metal. Wooden fencing in flower beds or flower beds, it dries out over time or rots under the influence of moisture and sun. Even metal curbs are susceptible to corrosion and require periodic maintenance, such as regular painting.

What about plastic? It does not lose its shape and does not collapse for a long time. This means that such a flower bed will last for more than one season or even one year, and it also requires absolutely no maintenance. Even if a “breakdown” occurs, the required “element” can always be found in the pantry and easily replaced, without resorting to long, tedious shopping trips to find a suitable fragment.

So, what can you make from plastic bottles with your own hands?

Bottle borders

If you need to fence a flower garden, plastic containers of different sizes will do the job perfectly. This will not only limit space and prevent growth perennial plants, but will still retain moisture and prevent the appearance of weeds.

The shape and size of the flowerbed depend only on the imagination of the summer resident: it can be either equilateral or in the form of some kind of animal or plant. You can also use bottles to break the flowerbed itself into segments.

Even a child can build a bottle border (with the help of adults, of course):

The first step is to draw the contours of the flower bed with a sharp object or sprinkle sand on the site.
Remove the labels from the bottles, wash them, pour sand into them and screw on the cap. If you don't have one, you can use ordinary land or water. This is necessary for stability, since empty containers will quickly fall out of the fence.
Dig a groove along the outlined contour so that the bottle can be deepened into it by about 1/3.
Place the filled bottles in the groove with the neck down, as close to each other as possible, and cover with soil.

For visual effect You can use bottles made of different colored plastic (green, white, brown).

Some summer residents do without digging in bottles. For example, bottles without a bottom are simply inserted into each other, forming a circle. Ready design you can “put” it on or take it into a ring around the tree trunk. To secure the curb, it must be pressed tightly to the ground with arcs.

Multi-tiered flower bed

If you really want to have a flower garden, but there is too little space, you can make it yourself from plastic bottles. The principle is the same as when constructing a border, only after laying the first tier it is necessary to fill it with nutritious soil, and only then lay out the next floor.

When planting plants for the lower tier, it is better to choose moisture-loving specimens, since when watering the water will flow down.

Mini flower beds

Beautiful and useful crafts for a summer residence, you can make it from 5-liter plastic bottles. They will serve as miniature and cute flower beds, for example, in the shape of everyone’s favorite piglets.

Group compositions in the form of trains with flowers look no less impressive.

And if instead of flowers you sow lawn grass, a large bottle turns into a cute hedgehog with green spines. All that remains is to attach the eyes and nose.

Those who are not afraid of small rodents will like cute mice from small (liter) bottles. They are good for planting petunias.

Flower pots and flowerpots

With a little imagination, plastic bottles can easily be transformed into small decorative pots for flowers or herbs. You can make them even or cut them to fit a marker in the shape of a face. Such flowerpots will look great not only in garden gazebo, but also in the house on the windowsill.

But if you put a fabric cover on the cut bottle and attach ropes, you will get elegant flowerpots for the summer veranda.

Most easy option do hanging pots- This is to cut out fragments of the walls on both sides of the bottle, and fasten a rope under the neck for hanging. Compact, low-growing plants can be planted in such flowerpots.

Making a beautiful garden path

Particularly popular among summer residents are paths made of plastic containers. The strength of such a path depends on the laying method and what part of the plastic container serves as building material:

Paths made of plastic bottles become very slippery in winter.

Fun playground - decorating a place for children to play

Caring parents always strive to provide their children with a place to play in their dacha, where the children can while away the time while the adults are busy in the garden. Of course, it should not only be safe, but also colorful so that the kids will like it. With the help of plastic bottles it is easy to decorate the playground by making a variety of plants and animals. Regular paint will help give them brightness.

In the shade under a palm tree

What is a children's playground without a sandbox? And where there is sand, a palm tree must “grow”. For Tropicana you will need bottles of green and Brown for the trunk and leaves, respectively.

Before you begin assembly, you need to take care of solid foundation. For example, fix in concrete screed metal pin, and it should be quite long so that the tree is tall and children can walk freely under it.

When the base is fixed, you can start “growing” the palm tree:

cut off half the bottle (the top and neck are not needed) and form a jagged edge;
Make a hole in the center of the bottom, string the blanks onto the base pin, bending the teeth to the side for a more natural look;
cut off the bottom of the green bottle and make straight cuts along the entire contour to the place where the wall meets the neck (if desired, the branches can be made into shapes - cut into 4 parts and make teeth on each one);
string fragments of the branch onto the base;
firmly attach the finished branches to the top of the stem (by welding or construction cords).

If after assembling the palm tree there are still a lot of green bottles left, you can use them to make a small (or large) Christmas tree. Remove the bottom of the bottle and cut it into long narrow strips right up to the neck. Trim the edges of the strips to resemble thorns. String the leaves onto the base.

Such a Christmas tree will look great on the site in winter, especially under the snow, and will also help out in New Year's Eve those who, in a hurry, did not have time to buy a living tree.

Guests from a fairy tale - funny animals

And of course, there must be toys. Children often take their old favorites outside. With the help of plastic bottles, you can easily diversify the “zoo”, creating real masterpieces - from the fairy-tale Frog Princess and Goldfish to modern cartoon characters.

Take, for example, a handsome cat, painted with black and white paint. Or you can use brown beer bottles and you will get a brown cat, also beautiful.

Form a head from two bottle bottoms (connect them), and the curves on the bottoms will indeed look like a real head. On one of them, paint eyes, eyebrows and mustaches with white paint, and a neat tongue with red paint. Insert small cut out ears on top. For the body, string the same short-cut bottoms onto the base, and close the body last. Melt the edges of the bottoms. Apply white paint along the melted contour of the ears and body fragments, and make a white spot on the chest on the front bottom.

Glue the head and legs - the top parts of bottles with elongated necks will be useful for them. Cut them to the place where the bottle expands, cut the edges with sharp teeth and build legs from 4-5 parts, putting them on the base wire. Screw the plugs onto the upper necks and use them to glue the legs to the body. For the tail, take a long wire and string the narrowest parts of the neck onto it, but without the plugs. To make the tail fluffy, cut the edges into thin strips.

Beautiful animals are also obtained from large 5-liter containers. With the right combination of bottles of different sizes and with the help of bright colors, you can place a zebra, horse, cow, donkey and even a giraffe on the site.

Flowers for my daughter

In the sandbox, children not only make Easter cakes. Little girls love flowers very much and often collect dandelions on the lawn (or in their mother’s flowerbed) to plant them in their sand garden. But you can make a whole greenhouse of flowers from bottles, and little girls will be happy to take part in making the most simple options. Chamomiles, cornflowers and tulips will decorate the sandbox, especially since young flower growers will be able to repeatedly “transplant” them from bed to bed without harm to the plants or mother’s nerves.

For flowers you will need:

wire for the stem;
straight parts of bottles for cutting leaves out of them;
necks or bottoms for the inflorescences themselves;
dye.

Adults can make more complex versions. Plastic roses or poppies will decorate not only the playground, but also the flower bed.

Plastic design for garden

Plastic bottles have a wide range of applications. So, if small animals and birds look appropriate in flower beds and playgrounds, then larger animals can be placed in the garden, among trees and shrubs. They will give the garden a unique look and enliven it.

Amazing garden sculptures

Representatives of large birds made of plastic look almost alive. Using multi-colored paints you can achieve a stunning realistic effect. To make them, you just need to master the technique of cutting feathers from the sides of bottles and prepare a frame on which they will be attached.

The following will look very impressive in the garden:

In the garden you can place sculptures of not only birds, but also animals of a large enough size so that they do not get lost against the background of tall trees.

Among the greenery, a bright spot will be a white sheep, which is quite easy to make if you have 2 liter bottles and several 1.5 liter bottles lying around in the pantry:

Cut the necks of two 2 liter bottles and put them on top of each other - this will be an elongated head. Cut out long ears from the third bottle, roll them up a little into a tube and attach them to the head in appropriate places with wire (or glue). You can draw eyes or glue two corks.
For the body, insert the whole bottle with the neck inside into the cut-off top. Make 3 more such blanks and attach them to the first one on the sides and top, thus giving the sheep the desired “waist” volume.
The neck will be a whole two-liter bottle, which should be attached to the body at an angle of approximately 120 degrees so that the cork is on top.
Place the head to the neck (on the plug).
For the legs, cut off the top of a two-liter bottle and insert a whole bottle of a smaller volume (1.5 l) into it. Make three more such blanks and attach the legs to the body with the wide part up.
From the cut bottoms of two liter bottles make a fleece, fastening them together, and put it on the body. Grip the edges of the fur coat under your belly.
Paint the sheep with white paint and draw black eyes.

Caring for birds

Plastic bottles can be used not only in decorative purposes, but also for the benefit of the garden. After all, it is always inhabited by the summer resident’s little helpers - various birds that collect pests from the trees. In the warm summer time they have something to eat, but in winter it becomes more difficult to get food. That’s when the feeders hanging around the garden will come in handy. And if you involve children in the process, the benefit is double: for children - interesting activity and pleasure, and for the birds - cozy house with grains.

The simplest ones can be made from large 5 liter plastic bottles, simply cutting out on both sides large holes in the shape of an arch.

To prevent birds from injuring their paws on the sharp edges of the bottle, they must first be melted or covered with electrical tape.

For those who rarely visit their summer cottage in winter, a feeder that fills automatically will come in handy.

You can make it from a bottle and two wooden spoons:

make two holes in the bottle opposite each other, with the second one located slightly lower;
unwrap the bottle and reverse side repeat the procedure;
insert the spoons crosswise into the holes.

After the bottle is filled with food, it will be poured through the holes into the spoons as they are emptied.

A cozy place to relax using improvised means

Not only birds, but also the owners themselves should have their own secluded corner among the greenery, where on warm summer evenings you can happily drink a cup of tea, inhaling the aromas of nature. Many people prefer to place it in the garden. They are very beautiful, you can’t argue with that, but they require certain financial investments. But it’s cheap and cheerful to make from plastic not only a recreation area, but also to completely equip it.

Alcove? Easily!

A gazebo is one of the largest-scale garden crafts made from plastic bottles. But a plastic gazebo has two big advantages:

it is easy to assemble;
will last for more than one year without damaging the material.

Perhaps the only drawback of the building is the presence large quantity bottles that need to be stored somewhere during the collection process.

What the gazebo will look like depends only on the desire of the owner, and, accordingly, on the availability of “building materials”:

Practical curtains for the gazebo

IN summer gazebos there is a lot of fresh air, but, unfortunately, also dust. Ordinary tulle requires frequent washing, while a plastic curtain does not collect as much dust, and you can “wash” it without even removing it - just spray it with water from a hose (of course, if such a curtain is not hanging in the house).

For dreamy and romantic housewives, delicate curtains made from the bottoms of plastic bottles strung on a base are suitable.

To energetic people who love bright colors, cork curtains assembled according to the same principle are more suitable.

garden furniture

A table, ottoman, armchair and even a sofa in a gazebo can also be made from plastic bottles. The old one from the house is also quite suitable for relaxing on fresh air, but like the curtains, it will eventually become a collection of dust. In addition, it is quite difficult to take a wooden sofa outside, because such furniture is quite bulky and heavy. But rearrange plastic chair won't be difficult.

Assembling the furniture is not difficult - the bottles just need to be placed tightly and connected together with tape, giving the required form. For ottomans, knitting or sewing a cape - no one from the outside will guess what they are actually made of.

Leatherette covers are more suitable for a sofa.

Unbreakable chandeliers for the garden

If you are planning an evening tea party, you should definitely go to the gazebo. To decorate the light bulb, you can cut the bottle into two parts and make a simple lampshade from the upper half and paint it or cover it with colored thread.

IN plastic chandeliers It is better to use energy-efficient light bulbs - they do not heat up so much and will not melt the material.

In more complex versions, chandeliers are assembled from fragments of leaves or flowers cut from multi-colored bottles.

Gardening supplies for gardening

To country cottage area looked beautiful and neat, it needs to be looked after all the time - weeding, collecting fallen leaves and small debris. To do this you will need tools. Of course, you won’t be able to make a hoe or rake out of plastic, but simpler ones are quite possible.

Craftsmen have long known how to use plastic bottles to benefit themselves and save the family budget. After all, if the scoop suddenly breaks, you no longer have to run to the store for a new one. From household waste, which is found in every home, a lot of useful things are obtained at no extra cost:

Garden cares

From plastic bottles you can make useful things not only for the garden, but also for the vegetable garden. These can be either small crafts in the form of, or larger-scale structures such as greenhouses.

Greenhouses for seedlings

Most summer residents grow seedlings garden crops on one's own. Some do this in apartment conditions, but better quality seedlings are obtained from greenhouses - there is enough heat and light.

We can’t even talk about cost, but as for durability, plastic bottles will certainly last longer than film shelters or glass structures.

To increase the service life of greenhouses made from plastic bottles, it is advisable to place them on a foundation and use a metal profile for the frame.

The simplest version of a greenhouse involves constructing walls from whole bottles that are placed on top of each other.

It will take a little longer to tinker with a greenhouse made of plates, but it will turn out warmer. In this case, you need to cut out even parts from the bottles and fasten (sew) them together in the form of a canvas. Use ready-made canvases to assemble a greenhouse.

Watering "systems"

For gardeners, watering is no less topical issue than having a greenhouse. Instead of ready-made irrigation systems can be used in the garden. They must either be hung above the bush, having previously made holes in the lower part, or dug into the ground.

In addition, the bottle makes a good sprinkler - you just need to make small holes in it and connect it to a watering hose.

Getting rid of pests

A repeller made from a plastic bottle will help drive you away from the area worst enemy summer resident - . He not only plows up the beds, digging his tunnels, but also damages them in the process root system plants, depriving gardeners of the future harvest.

If you cut the side walls of the bottle, bend them and put the container on a steel rod, when there is a gust of wind, the bottle will spin and make noise. The sound will go into the ground through the rod and deprive the mole of the desire to manage in this noisy place.

The list of things you can make from a plastic bottle with your own hands is quite long. These are just a few crafts that make life easier for summer residents. Agree - it’s better to take it out of bottles maximum benefit than to pollute the environment. Take care of nature and work with pleasure!

21 ideas for using plastic bottles - video

When a person has free time and fantasy - any useless thing will turn into a work of art. Many “ skillful hands” use crafts from plastic bottles as elements, as well as in the form of furniture. Colored bottle caps are used to make mosaic panels that cover the surfaces of walls, paths, and fences.

Range creative possibilities so broad that you often don’t know where to start. We will help you understand what is suitable specifically in your case and what crafts to decorate the empty space with.

Application of plastic bottles

After several attempts to make a souvenir from a plastic bottle with your own hands, your one-night hobby will grow into a full-fledged hobby. It's so simple and accessible! There is practical and decorative use products from plastic bottles.

Practical- This:

storage containers,
feeders,
stands,
plant containers,
furniture

and even carports, greenhouses, washbasins, Summer shower etc.

Crafts from plastic bottles - this and homemade furniture . Looks pretty complex design It's quite easy to make. The only condition is that there must be many bottles of the same type available. Hand-made armchairs, sofas and ottomans are not inferior in comfort to classic factory furniture.

How to make an ottoman from plastic bottles: master class

Decoratively homemade plastic bottles have a wider scope:

figures made from plastic bottles;
lamps;
flowers
garlands, etc.

They have one important advantage - the availability of material. At the same time, products made from PET bottles are highly reliable, provided that the parts are connected correctly.

Often made from plastic bottles vases, pots and flowers.

In addition, using plastic container, can be original decorate the room by making an artificial bouquet. Roses, tulips or daisies are placed in a homemade vase. If desired, the composition is designed LED lighting. Thus, an impromptu flower will turn into an unusual night light.

What can you make from plastic bottles for your yard?

There is always an empty plot in a dacha. Building a gazebo or an extension is long and difficult, but the “bare”, uncluttered area just “hurts” the eye. Crafts made from plastic bottles for the street will help decorate your courtyard. Using plastic bottles, caps and frames, make beautiful tables with chairs. Such garden furniture It will be easy to surprise guests during a festive feast in nature.

In products made from plastic bottles included and bird feeders, which will not only decorate your summer cottage, but also help birds survive in the winter.

Ideas from plastic bottles: lamps made from caps

From the caps and cut necks, with the help of simple manipulations, they come out original lamps , which will decorate both the interior of the house and the yard. Unusual lamps are harmoniously complemented by plastic compositions decorated in the form of exotic plants.

Learn to collect simple crafts from plastic bottles possible within 2-3 hours. Go for it!

Crafts from 5 liter plastic bottles

The bulky-looking container is also suitable for decorating the interior or yard. Large plastic bottles are often used to make pet figurines(pigs, bulls, dogs, etc.). Crafts from 5 liter PET bottles - a common decoration for cottages, flower beds and playgrounds. Therefore, there are many ideas for using them, and the most striking examples of products made from plastic bottles are collected on our website. simple but tasteful.

Use of 5 liter plastic bottles: master class

Useful tips

7. Lift the fabric and thread the string through it.

Master class from plastic bottles. Mobile phone holder.

You can also make a good and very useful mobile phone holder from a plastic bottle. You need it when you urgently need to charge your phone, you find an outlet, but there is nowhere to put the phone.

Prepare a 0.5 liter plastic bottle and pierce a hole with a knife to further cut off the unnecessary part of the bottle.

Using scissors or a utility knife, cut out a circle for the fork.

All that remains is to insert the cord from the charger into the “neck” and plug it into the outlet.

Master class from a plastic bottle. Chandelier.

You will need:

50 plastic bottles (volume 0.5 l)

Flower wire

Regular wire

Bulb

Spray paint

Glue (preferably a glue gun)

Scissors

Stationery knife

1. Prepare plastic bottles and remove labels from them.

2. Cut each bottle into the shape of a flower (see picture). To do this, use a stationery knife.

3. Spread the "petals" of the flowers.

4. Once you've completed steps 1-3 with all 50 bottles, it's time to paint them. Use spray paint, or you can take a little more time and paint each flower with acrylic paints. You can choose any color. You can also vary the colors by making some flowers one color and others another.

5. Make a circle out of regular wire. Wrap the jute and use a glue gun to glue it to the wire. You will have the base of the chandelier to which the flowers will be attached.