Simple and reliable DIY mousetraps. DIY reusable mousetrap

Nobody likes mice, because these small rodents can cause a lot of damage to a living space. Their teeth are so strong that they can easily chew through almost any material. The problem is that they have ever-growing teeth, so they need to chew on something. Otherwise, they would grow into the animal’s skull, leading to its death. People have learned to deal with them in different ways, but in the simplest and most effective way is a mousetrap. You can make such a device with your own hands (a photo of the process is presented below) in a matter of minutes.

Advantages of a homemade mousetrap

Of course, many people purchase a factory device. But its mechanism is so simple that you can do it right at home. Moreover, you can use various materials, so that in the end a high-quality mousetrap will be created. You can make such a device with your own hands in 5-10 minutes, but it has many advantages compared to the factory model. Firstly, the mechanism will cost much less. Secondly, you can choose the most suitable design yourself. Well, thirdly, if it breaks, a new one can be constructed at any time.

Types of mousetraps

Do-it-yourself mousetraps can be of two types: disposable and reusable. Let's look at the features of each of them:

Reusable devices are usually made from plastic bottles, wood, and glass jars. The advantage of such traps is obvious - they can be used several times. In addition, the caught mouse will remain alive, since it will get into the cage, but will not be harmed. In order not to kill the poor animal, it can be taken to the forest or released into the field.
Disposable mousetraps are made from glass bottles with a wide neck (for tea). Bait is placed inside: for example, a piece of cheese. A thick thread must be tied to the neck so that it does not break. The other end of the thread is attached to a stable object. If the mouse gets inside the bottle, it will roll down, after which the rodent will remain there. To release the creature into the wild, the mousetrap will have to be broken.

Manufacturing of the device

Do-it-yourself mousetraps from a bottle can be made in several ways. This option has a significant advantage - its production requires a minimum of funds. After all, even if you are not at home empty bottle, you can buy soda, and raw material will appear. Let's look at two ways to create a trap.

Method 1. You need to take a bottle, cut it into two parts, the height of which should be approximately the same. On a half with a flat bottom, sharp petals should be cut, which should be bent inward. In order for the mouse to get into the cage, you need to put any bait in the mousetrap. Once inside, she will no longer be able to get out.

Method 2. Cut the bottle into 2 parts. Cut the neck so that a mouse can easily pass through it. You should put bait in the lower part. After this, you need to place the top part in it with the neck down. This will make a good mousetrap. You do it with your own hands so that the mouse can easily fall into it. She will no longer be able to get out of there.

Bucket mousetrap

Many people don’t know how to make a mousetrap with their own hands from a bucket. But it is done very simply. To do this, take any bucket, in the upper part of which you need to install metal rod. From the top view it should look like the diameter of a circle. You need to put some kind of vessel (a jar or bottle) on it, which should rotate freely. Any bait should be placed on top. When the mouse wants to eat it, it will climb onto the bottle and, spinning, fall into the bucket. The bucket must be positioned so that the rodent first steps on the neck of the vessel. This will increase the likelihood that it will fall.

Mousetrap from a jar

This is one of the simplest options, because a glass jar is found in almost every home. If the mouse haunts you and there is no free jar, you can open the cucumbers and eat them. After this, the container should be thoroughly washed, since it is not recommended to work with dirty devices - the result may be a bad mousetrap. You can make it with your own hands from a jar. It is very easy to do, but such a device will be very effective. To do this, take a jar and then roll it up with a lid. It must be carefully cut using cake cutting technology. To attract the attention of a small rodent, you can put a small piece of lard at the bottom of the mousetrap. In addition, mice love cheese, wheat, grain, and bread. The mouse will be able to climb into the jar, but it will not come back out, since the sharp teeth will interfere with it. If you don’t want to roll up the jar, you can simply cover its neck masking tape and cut it crosswise. When the mouse steps on it, it will fall inside the jar.

Any of the selected options is much more better than traps which are sold in stores. After all, after each use, they must be re-adjusted, and this can be quite harmful to your health, since your own fingers can get caught in the mousetrap.

Rodents can take up residence in a room where food is occasionally available. The consequences of such a neighborhood are disappointing. In addition to irritation and anxiety, mice are carriers of infections and active pests of food and furniture in the home. The solution to the problem can be a do-it-yourself mousetrap made from improvised materials. Below is the rating of the most effective options traps that you can make yourself.

What are the advantages of mousetraps made from scrap materials?

Before considering the features of mousetraps from the top, a few comments regarding their advantages over ready-made traps or such fashionable devices as an electronic mousetrap for exterminating rodents.

If we compare traps made at home with drugs used to bait rodents, the former will turn out to be more humane and safe. You can catch uninvited guests using homemade boxes, buckets and bottles at any time, without requiring the removal of household members from the house. But insecticides do not allow for the presence of children and pets in the house, which creates certain difficulties.

The indisputable advantage of a homemade rodent trap is the availability of funds. You can make a mouse trap from anything without extra costs, starting from cardboard box from under the cake and ending with a plastic bottle.

An important advantage of homemade mousetraps is their reusability. In addition, most traps operate in such a way that they do not require constant monitoring.

Secrets of choosing the right bait

You can make a mousetrap that will be thought out to the smallest detail, designed for repeated use in automatic mode, but only the right bait will help achieve the effect.

It is believed that rats and mice are crazy about cheese. This is actually a stereotype. Indeed, the product does not leave the animals indifferent, but it is not their favorite treat. Rodents are much more interested in bulk baits with a pungent odor, for example, bait made from:

sunflower seeds;
bread crust dipped in sunflower oil;
breadcrumbs in sesame oil;
lard and blood sausage.

All these products will attract the attention of rodents, which means they will lure them into pre-prepared traps.

How to make a wood trap at home?

The desire to make a trap for mice or rats with your own hands and using available materials is completely justified in all respects. Using previously unnecessary materials(remains from repairs or construction work), you can build really working devices for catching pests.

Wooden mousetraps are one of the most practical options. Such devices can be used for a lifetime, exterminating more than one generation of rodents. On initial stage It's worth trying to make a 5-cell trap. For this, a small piece of timber with parameters 180×100×60 mm from any wood, two pieces of steel wire with a diameter of 2 mm and 0.2 mm, as well as natural thread No. 30 are suitable.

The manufacturing process begins with preparing the holes in wooden base devices. In total, you will need 35 such holes with a diameter of 1 mm each. The next step is to drill 5 niches with a diameter of 30 mm and a depth of 65 mm. The device will require staples and springs - they are made from prepared parts of wire. As soon as the springs are fixed to the base, nooses made of thin wire are attached with a margin of 15 mm.

The finished mousetrap is charged using a thread. It is threaded into a large needle, the spring is pressed and tied with several knots. The remaining cells are prepared in the same way. Once all the compartments are charged, prepare the bait. These mouse traps work on a simple principle. The rodents smell the bait, chew the thread to get to it, and the spring with the noose is triggered.

Jar and paper - how does the trap work?

A simple option is a mousetrap from a jar, which even a child can make. So that rodents can climb to the neck of the jar, a kind of “ramp” is built for them, and the bait is placed inside the jar, tightening the neck with paper cut crosswise.

As soon as the mouse touches the paper, its parts will open and the victim will fall into the container. This humane mousetrap suitable for those who are not ready to take on the responsibility of exterminating mice. It has a significant drawback - low level efficiency. Often mice, especially those with experience, sense a catch and do not touch the cut paper. Only young individuals who are unable to sense danger in advance get into the jar.

A jar and a coin - how to make a mousetrap?

Another version of the device for catching mice from a jar, this time with a button or coin. Just like the previous option, the can will not kill, but will only help catch rodents in a humane way.

The operating principle is more than simple. A button, coin or any washer is used as a support, lifting the jar (can be replaced with a pan or bucket). A strong thread with a hook is tied to the support, a rod is placed inside the container to secure the thread, and bait is placed on the hook. The smell of the treat will attract the mouse to the jar, it will pull the hook, the thread will stretch and drop the washer as a support, as a result of which the rodent will be trapped unharmed.

Using the same principle, a trap can be made from a box, for example, from under a cake. A hole is made in the lid exactly in the middle, where half of the stick with a cotton swab at the end is inserted so that it is outside, and the part without the swab is inside the box with the bait.

Any weight can be placed on the lid of the box; it can prevent the mouse from trying to get out after the trap slams shut. The bait is attached to a stick inside the box, the edge of the lid is lifted and placed on a small support. The rodent will be attracted by the smell of the bait, it will climb into the box, and when it tries to remove the food from the stick, the box with the weight on the lid will close.

Such homemade mousetraps are quite effective, but have one significant drawback - they work once, which means they can catch one mouse.

//www.youtube.com/watch?v=-1SoXy2gY3o

Bucket of water at the base of the trap - device

A working mousetrap from a bucket of water is easy and quick to make. To do this, two holes are drilled in the bucket, a metal rod is passed through them with a plastic bottle previously placed on it with a lid lubricated with oil for easy rotation.

The neck of the bottle is pulled to the edge of the bucket, and bait is attached to the middle. The mouse, sensing the smell of food, will climb up the bottle, will not be able to stay on the slippery surface and will fall into the water.

Simple and at the same time efficient designs Mousetraps of this type allow you to catch several individuals at once in the absence of the owners of the house.

A simple mousetrap from a flower pot - the secret of the device

Ownerless flower pots can be used around the house. One of them is a DIY mouse trap. Primitive and at the same time efficient device A mouse trap allows you to catch rodents in a short time without much difficulty and expense. It works simply: the pot is turned upside down, placed at an angle on a small “guard” by analogy with the jar described above.

The bait is placed on the end of the “guard”. As soon as the rodent smells the bait, it will try to remove it from the tip, which will lead to the pot falling and the trap slamming shut. To prevent the prisoner from escaping, it makes sense to install such traps on sheets of plywood that prevent digging.

Glue mousetraps - how do they work?

Glue traps are also quite easy to make with your own hands, using mouse glue, a base such as plywood or a plastic tray, and of course bait.

The base is coated with special glue for mice (just buy in a specialized store), and a trap is placed in the center. There is nothing complicated about how this type of mousetrap works: a mouse or rat will get close to the treat and stick to the composition of the tray.

The disadvantage of the trap is that it is not the most humane method of capture. The rodent, sticking to the base, does not die, but for a long time tries to free itself, desperately squeaks and squirms, at the same time, it is no longer possible to peel it off. For those who find it difficult to endure the suffering of animals, an option such as homemade Velcro for mice will seem inappropriate.

A simple trap made of plastic containers - manufacturing algorithm

A more than simple, and most importantly humane way to catch rodents at home is to make a trap from a plastic container. To do this you will need the following elements:

plastic bottle;
thread or rope;
bait.

It's easy to build a mousetrap from a plastic bottle. Cut off the neck of the container and make two holes for attaching the thread. Bait is placed in the inside. One part of the thread is tied to a weight or glued to the edge of the table. The container is placed on the table so that most of it hangs from it.

As soon as the mouse comes to the scent of the bait, it will climb into the bottle and gravity will play a role here - the bottle will fall to the floor along with the rodent, hovering above the floor due to the correctly selected length of the thread. The caught prey can be released away from the house without stress for it and the household.

Top mousetrap - how does it work?

Effective traps for mice at home, also suitable for catching rats - “tops”. Visually, these are structures based on elongated cells with a cone-shaped entrance. At the level of the cut end of the structure, another entrance begins - this is a dead end. Its lower part is the bottom of a smooth plate, fixed by a wide base. The plate is pressed against the cone underneath and acts as a counterweight to mask the stroke.

A rat or mouse will try to get inside based on the smell of the bait. When unsuccessful, she will try to move back to make sure the exit is safe, after which she will go inside again and hit the second cone. Under the weight of the animal, the platform will lower and the victim will fall to the bottom of the trap, after which the structure will be brought back into place. working condition for new production. You can make a design with your own hands if you have finished drawing traps.

Zürner mousetrap - how to make it at home?

A design similar to the previous one is a Zürner trap at the base with a box, which is masked on the outside with a sloping lid and lined with galvanized iron on the inside. Two opposite sides have inlet holes or windows; opposite each there is a fixed bridge on a hinge, the ends of which rest on the edges of the holes. The inner ends without supports form a long bridge stretched “over the abyss”. A hook with bait is attached above the area where the bridges close, fixing it on the lid of the box.

The design works according to the following principle:

the mouse runs along the bridge to the bait;
under its weight the bridge bends and the animal falls to the bottom;
the bridge returns to its original position.

Is it possible to make a trap at home with such a device? This is possible, and the process of constructing the structure will be several times higher simpler process devices of the previous “Versha” mousetrap.

They cause disgust or fear, in addition, they are carriers of a number of diseases, eat food and spoil surrounding objects. The device for catching rats and mice described in this article will help you solve the problem yourself. You will make a mousetrap with your own hands using available materials.

In situations where it is undesirable to use poisons because children or pets live indoors, and there is no time to purchase store-bought traps, you can try making a mousetrap yourself. The process is quite simple and does not require complex equipment and skills. You will need paper, different containers (buckets, plastic bottles of different sizes) and household items that are found in almost every home (wire, small pieces of wood, a school ruler, plastic bottles).

Many traps made from improvised materials are capable of operating autonomously, without recharging, and are designed to be triggered multiple times. Such mousetraps can be left when leaving home from the dacha (the main thing is not to leave the mousetrap for a long time, in order to avoid the appearance of a foul odor). In a few days, there will be no trace of mice left and you won’t have to do or buy anything.

A little about the bait

For making a mousetrap to be productive, it is not enough to know how to make it correctly. Hunting cannot be successful without the desire of the mouse to go in the required direction, and only bait can provide this.

The opinion that mice are crazy about cheese is erroneous and relates more to stereotypes than to reality. They really eat it, and most likely they like it, but there are also much more best views mouse trap baits:

Flavorful grains such as sunflower seeds;
Fried lard or sausage (especially blood sausage);
Dry bread soaked in vegetable oil(sesame definitely won’t leave the mouse indifferent).

The best bait for a mousetrap - video:

Varieties of mousetraps made independently

Mice have accompanied humanity throughout its history, and during this period people have come up with a lot of ways and devices to combat them. Modern technologies expanded this arsenal, but some old solutions are still relevant.

Plastic bottle

There are several ways to make a mousetrap from a plastic bottle, let's look at the most famous and simple one:

Cut the bottle 3 cm from the middle closer to the neck;
We put bait on the bottom;
Remove the plug and lubricate the inner surface of the neck with oil;
We insert the neck down into the second part and fasten both halves with glue or wire.

The mouse, sensing food, penetrates the bottle easily, reaching the bait through the oiled hole, and will no longer be able to get out on its own.

An alternative way to make a mouse trap:

We find a container with a neck diameter sufficient for the mouse to penetrate inside;
We tie a thread to the neck of sufficient length so that its other edge can be tied to something without tension;
We place the bait at the bottom and place the container on the edge of the table so that it tips over with a slight change in the mass of the hanging part.

The mousetrap works as follows: the mouse, sensing the smell of food, climbs into the bottle and, with its weight, causes it to tip over. Since the container is tied by the neck, it hangs on a rope, and the mouse cannot escape from such a situation. In addition, it will remain alive, so it is also a humane method of rodent control.

Electric mousetrap

Unlike the previous one, this method is not humane. An electronic mousetrap works on this principle:

We attach one of the wires to the metal plate (the metal should not be painted);
We coat the second wire with something that is edible for a mouse and has a strong smell, for example, peanut butter.
We connect the device to the network in such a way that the phase is with the bait, otherwise the mouse will immediately feel a small discharge and may change its mind about moving on.

Bucket with water

Making a mousetrap from a bucket of water is quite simple and there are a great many variations of it. Let's consider one of them:

Place a wire or metal rod on top of the bucket ( welding electrode best option), it is advisable to secure it to prevent it from moving or falling into the bucket;
Perpendicular to the rod we place some flat and oblong object, for example, a school ruler. One edge of the ruler rests on the top of the bucket, the other is above the water.
For everything to work at home, you need to place the bait on the edge of the ruler, located above the water, and make it easier for the mouse to rise to the top of the bucket by placing a board next to it.

Catching occurs as follows: the mouse walks along the ruler for food, and at some point the ruler tips over under its weight. In addition to a ruler, you can use any object, for example, a tunnel made of folded paper.

Another simple mousetrap using a bucket:

A plastic bottle is pierced with a thin metal rod through the bottom and neck;
Food of interest to the mouse is attached to its middle;
The rod is placed on the bucket so that the bottle is in the middle of the bucket;

The mouse goes for food and as soon as it stands on the bottle, it spins and the mouse falls into the bucket.

Jar with coin

Very simple and effective mousetrap can be made not only from a jar, but also using any other suitable container, for example, a pan.

We attach the bait to the inner surface of the jar at a distance of approximately 4–5 cm from the neck (can be attached with tape);
The jar is placed upside down and a coin or button is placed under one edge of the neck for support.

If there is a mouse at home, it will definitely try to sit on the bait, and since the support is very sensitive (you can verify this by placing the jar on a coin), the jar will definitely cover the rodent.

Adhesive

Making a glue mousetrap with your own hands is quite simple. To do this you will need: special glue, a base for its application and bait.

The base is lubricated with special glue for mice, which is sold at specialized sales points. There is nothing complicated about the operation of this self-made trap. A base coated with glue is placed on the way to the food. The animal tries to overcome it and sticks to the base.

The method will be of interest primarily to those who vehemently hate mice. The reason is his complete inhumanity towards them. A rodent caught in such a trap will face long suffering. He will not die right away, but will try to free himself for a long time, squirming and squirming in the sticky trap that has bound him. And everything is in vain - it is impossible to free yourself from the glue even with the help of a person. In general, the method is not for the faint of heart.

Jar and sheet of paper

Apart from a jar, any container can be used. You will also need a sheet of paper, rope and bait. The tricky trap is made as follows:

Let's prepare paper sheet, to do this, we cut it from the center to the edges, so that in the middle we get something like a cross of cuts (there should be no obvious hole).
Cover the container with the prepared sheet so that the center of the cuts is located above the middle of the container.
We tie the bait above the center of the entire structure and wait.

The mouse or rat will go for food and when it is in the area of the cut paper, it will fall into the container. The disadvantage of this method is that it works without misfires only with young individuals. An adult mouse, especially one that has experience of getting into similar situations, senses danger and does not move on.

High-tech, computerized mousetrap

This technological marvel uses multiple sensors to detect a rodent. A foreign developer named Jake Easton came up with the idea to do something similar. This one works homemade trap in the following way:

Special acoustic and visual sensors, having detected a mouse within reach, set in motion the operating lever of the device under which the bait is located;
The mouse follows the smell of the bait, and when it finds itself in the sensor response zone, a pneumatic drive is started, which hits the unsuspecting mouse with a metal bracket with a force of up to 50 kg.

The result is the same as when a conventional spring mousetrap is triggered. The presence of computer technology has not made rodent control more humane. Jake Easton called his invention “Better Mousetrap”, which translates from English as the best mousetrap.

Wooden

A fairly simple and safe trap for others, but to make it you will need a drill, drills, a hacksaw and some skill in working with these tools. Step by step:

We cut a block from wood with a cross-section of 40x40 mm and a length of 100 mm.
We drill a hole in it from the end for the entire length of the block (but not all the way through), with a diameter of 25 mm.
At a distance of 10 mm from the end with the hole, we make a slot on top (2–3 mm) so as to partially open the hole.
Immediately behind the slot (3 mm) we drill two through holes nearby so that the thread threaded through them blocks the path to the end of the drilled cavity.
We attach a spring with a loop opposite the slot to the edge of the block opposite the entrance to the trap.

The wooden mousetrap is ready for use. Catching mice is as follows:

We place the bait in the blind edge of the mousetrap.
We lower the loop into the slot so that it coincides with the diameter of the hole and fix the spring with thread.

The principle of operation is simple: the mouse tries to get to the bait and gnaws the thread, the spring is triggered and clamps the mouse in a loop. This version of the mousetrap is reusable, and there are also “multi-apartment” designs.

Review and operation of a mouse trap-live trap - video:

Conclusion

Using all of the above methods of catching and destroying harmful rodents, it will not be difficult to put one of them into practice yourself. All you need is a minimum of available tools and a little patience. If the options seem insufficiently humane, you can entrust the matter to nature and get a good cat.

The “mice fuss” that the owner hears in his house is unlikely to bring joy to anyone, because with the appearance of these pests one can expect a lot of troubles: spoiled food and packaging, chewed furniture. The likelihood of various diseases caused by infections often carried by mice also increases. It is necessary to immediately take measures to exterminate rodents on your own, so the story of how to make a mousetrap with your own hands will be of interest to many homeowners.

Advantages of self-made traps

Devices made from improvised materials have many advantages over ready-made mousetraps or special designs. They are convenient and safe, because it is possible to catch a rodent in a box or bottle at home at any time of the day or night, and residents do not have to leave home at all. Application chemical substances With strong odor always negatively affects small children and animals living in the house.

The main advantages of a do-it-yourself mouse trap are the low cost and availability of all components, because it is very easy to find a plastic bottle or bucket in the house, and they are reusable without extra expenses. In the event of a breakdown or failure, there is always the opportunity to try to make another model yourself.

Secrets of preparing bait

Whatever homemade mousetraps are made, the main thing in them is the optimal one, thanks to which the mouse will want to climb into it. Despite the famous children's fairy tales in which cheese is the main delicacy for mice, this is not entirely true. with the same pleasure as bulk products with a pungent odor:

sunflower seeds;
bread crusts soaked in vegetable oil;
croutons with sesame oil;
pieces of fried lard or sausage;
buckwheat, rice or wheat;
nuts;
fresh meat.

On a note!
When installing traps, it is important to provide optimal ways to approach them so that a mouse in an apartment or house can easily reach and get into the prepared device.

Types of traps

There are many different ideas, how to make mousetrap designs. They can be made from ordinary materials that can be found in every household (see photo of mousetraps).

From buckets and cans

There are many options for such traps. Below are the most popular traps:

The simplest mousetrap is made in a couple of minutes from glass jar by 0.5-1 liter. You need to put a bait on a string inside it or attach it with a twig. The jar is turned upside down, and a coin standing on the edge is placed underneath; it is better to choose a larger size so that the animal can slip inside. Such a structure is very unstable, and at the slightest movement of the rodent in an attempt to take food, the coin falls and the jar covers it.
Making a mousetrap from a bucket of water is quite simple. Additionally you will need: a ruler, strong wire and a knitting needle, which is attached across the ruler and used for support; it is placed on top of the bucket. The lying ruler should reach the edge of the bucket with one end, and the other should hang in the air and the bait should be placed on it. The bucket itself is placed so that the animal can climb onto the ruler, and then, reaching for the bait, falls into the bucket, into which you can pour some water. If the bait is firmly attached to the ruler, it will hold, and then the trap will be more effective and it will be possible to catch several mice in a row.
To make a mousetrap from a bucket and paper, you will also need a piece wooden plank, along which the animal will climb up. Thick paper or a sheet of whatman paper is placed on top and cut in the center into several segments in a circle, and a piece of bait is placed in the center. The mouse climbs the bar, tries to get food and falls through the slits in the paper downwards, where water is poured to a depth of 5-7 cm. Similarly, you can use a 3-liter glass jar.

From bottles

Plastic bottle traps Plastic bottles are the most popular material used in making traps. They are usually made from one and a half, two or 5 liter bottles, but you can also use a glass one:

A very simple and easy to use mousetrap made from a plastic bottle, the neck of which needs to be cut off in a narrow place. The bottle is placed on the corner of the table so that part hangs over the edge, and the bait inside it lies at the bottom. The trap is attached with a rope, the length of which will allow it to hang above the floor. Having climbed onto the table, the mouse will penetrate the bottle for food, the center of gravity will shift, and the trap will fall with the caught animal, hanging on the rope.
Another mousetrap is made from one and a half rubles - plastic bottle 1.5 liters, the neck of which is cut off a third of the height at the top, and then turned upside down. The parts must be secured to each other with wire or glued together. The bait is placed inside the container, and the throat is lubricated with oil. The mouse will definitely reach for food and fall down, and will not get back out.
Another trap from a plastic bottle is made like this: half of it is cut off, and on its lower part, near the bottom, cuts are made in a circle every 2 cm in the form of pointed petals, which are folded inward. After the mouse climbs inside for food, the sharp teeth of the petals will not allow it to crawl back out.
You can catch a mouse in a bottle not only with a plastic one: for this you can also use a Champagne bottle, into which you need to pour 25-30 ml of sunflower oil and, rotating in a circle, distribute it inside along the walls. The bottle is placed at a slight angle, resting its neck on the brick; it is better to secure it. A mouse, attracted by its favorite smell, climbs into a bottle of oil, from where, sliding along the greasy walls, it is no longer able to get out.

Wooden traps

Mousetraps These traps are easy to make yourself:

The most common mouse trap can be made from a plywood board measuring 10x5x.15 cm, with a metal wire frame with a spring attached to it. There must be a hook for the “yummy” and a latch, which after installing the bait must be hooked to the hook. When the mouse tries to steal the food, a spring is activated and pins it to the wooden base.
A wooden house mousetrap is made from timber measuring 180x100x60 mm into several cells (up to 5). First, you need to drill holes in the beam for the passage of mice with a diameter of 3 cm and a depth of 6-7 cm. You will also need pieces of wire and thread No. 30. You need to make a loop from strong wire that will attach a noose from a thinner piece of wire to the house. For fastening springs and hinges in wooden block drill holes.

In total, several sets of loops, springs and nooses are made according to the number of holes. A thread is needed to tie a charged spring. The bait is placed inside the holes: when the rodents try to get food, they chew the thread, the spring, together with the noose, is triggered and the automatic trap holds the mouse.

Electronic mousetrap

A do-it-yourself electronic mousetrap can be made by an owner who has knowledge of working with electricity and similar devices. It is made using a soldering iron, an electrical circuit and an electromagnet. Usually they come in two types:

, into which a mouse is lured, then the door slams and a signal sounds about its appearance in the cage;
killer mousetrap, which, after an animal gets into it and the motion sensor is triggered, destroys it with a discharge electric current, there is such a diagram on the Internet.

When making electronic devices, you should remember the safety rules when working with electricity, so as not to get into a life-threatening situation.

Traps with glue

Glue-type mousetraps are made using special glue, which can be purchased at a hardware store. A sheet of cardboard, plywood or hard plastic is taken as a base, it needs to be smeared, and food should be placed in the center. Getting to the “yummy”, the rodent is tightly glued to the base. The disadvantage of the device will not be entirely nice view and the shrill squeak of a dying animal. You can make this glue yourself by mixing Vaseline, bitumen pitch, rosin and pine resin.

A mouse trap will help you get rid of unpleasant and sometimes dangerous rodents - it’s easy to make a device with your own hands that is no less effective than commercially available models. Making mousetraps yourself from scrap materials will save money, because most often, several devices are required simultaneously to eliminate pests. Based on the descriptions given, you can choose the most effective and simple to implement designs.

If the use of toxic substances to control rodents is undesirable due to the presence of children or pets in the house or dacha, and buying several traps in the store seems too expensive, it’s time to learn how to make a mousetrap yourself. For production you will need simple materials, always available in everyday use - paper, various containers (you can often use empty unnecessary containers), wire, ruler, etc.

Please note: most traps self-made reusable or self-charging, which allows you not to constantly monitor them and catch several rodents with one device, leaving the trap unattended while you leave (optimally - no more than a week, so that an unpleasant odor does not appear.

Bait

In order for pest hunting to be successful, it is not enough to know how to make a mouse trap. It is also important to “convince” the rodents to show interest in this trap, which means an attractive bait will be required. There is a common stereotype - mice love cheese. Animals really like this product, but sunflower seeds, lightly fried sunflower oil or a piece of bread dipped in it will be more effective as bait. Sesame oil is a win-win option - its aroma does not leave mice indifferent, and you can also use a piece of lard.

Bucket and ruler trap

This trap model is suitable for those who prefer the simplest but most effective solutions and prefer clear instructions, including how to make a mousetrap with your own hands. Another advantage of such a trap is the interchangeability of its elements - instead of a bucket, you can take an old pan or plastic container, and the ruler can be replaced with any suitable sized strip or strip of thick cardboard.

In addition to the ruler, you will need a knitting needle or a rigid, round metal wire. The knitting needle is glued to the ruler perpendicularly and serves as a support - it is laid so that both ends rest on the edges of the bucket. A strip or ruler glued to the knitting needle should rest on the edge of the bucket with one end and hang over it with the other. It is at the overhanging end that the bait is placed.

The trap is located in a place where the mouse can climb onto the rail laid on top of the bucket. The mousetrap will work even if the container is empty, but to increase efficiency it is recommended to fill the bucket about a third with water.

This trap works simply. The mouse walks along the ruler, attracted by the smell, but, having overcome the intersection of the ruler and the knitting needle, it shifts the center of gravity of the structure, as a result of which the end of the ruler, freely hanging over the bucket, drops sharply and throws the rodent into the container. In order for the mousetrap to be triggered repeatedly, the bait should be secured to a rail so that when triggered, it does not fall into the bucket along with the mouse.

Trap from a jar with cut paper at the neck

This DIY mouse trap is made by analogy with the previous one. To allow mice to climb to the top of the can, a “ramp” is installed, but the bait is in in this case placed inside a jar, the neck of which is covered with paper. In order for the paper on the neck of the jar to become a real trap for rodents, it is carefully cut (for example, with a razor) crosswise.

As soon as the animal hits the paper, the “petals” formed during the cut bend inward, and the mouse falls into the jar. In other options, it is possible to place a lightweight bait directly in the center of the cut paper, or the bait is tied to a rope and placed above the center of the jar.

The disadvantage of such a simple trap is that it is not very effective. Mice somehow sense a trick and are afraid of the cut paper.

Glass jar and coin trap

Such homemade mousetrap from a jar is simple and can also be made from a saucepan, and if desired, a coin can be replaced with a large button or a metal washer. A coin (button, washer) serves as support for the raised edge of the jar. A strong thread with a hook at the end is glued or tied to the support. A rod is installed inside the container (you can use wire, a twig, etc.), through which the thread is thrown. The bait is put on the hook.

Attracted by the aroma, the mouse pulls the hook with the bait, after which the thread tightens and pulls the support out from under the can. For maximum efficiency The bait should be placed at a distance of 2-4 cm from the surface. The disadvantage of the trap is that it requires reloading. That is, having “covered” one mouse, the can ceases to be effective.

In more simple version the bait can be glued to the wall of the jar, then when you try to get to it, the mouse will shake the jar, which will lead to the support falling.

In order to remove a caught rodent, it is convenient to slip a sheet of cardboard under the triggered can.

Other ways to get rid of mice are described.

Plastic bottle traps

1 option

This DIY mousetrap is made from a plastic bottle in a few minutes. The container is cut at 2/3 of the height (the longer part is with the bottom). After this, the part with the neck is turned over (the neck without the plug becomes directed into the structure). The neck is lubricated with oil, and the bait is placed inside the container. To prevent the parts from coming apart, they can be fastened with glue, wire or another method. The mouse easily slips through the lubricated neck, but cannot get back out.

Option 2

Another simple mousetrap that even a schoolboy can figure out how to make.

A plastic bottle (the neck is cut off approximately at the point where the narrowing begins) with the bait inside is placed on a table or shelf so that a significant part of the container hangs over the edge of the surface. In this case, the bait should be located at the very bottom. Such a trap is tied to a shelf with twine, the length of which ensures that the trap hangs above the floor when it falls. When a mouse gets into a bottle, it shifts its center of gravity. The trap falls and hangs together with the caught rodent.

Mousetrap made from a bucket and a rotating bottle

One of the most ingenious solutions on the topic “how to make a mousetrap at home”, at the same time effective and easy to implement. It requires a metal rod-axis and a plastic bottle with a cap. Holes are made in the container (in the lid and bottom) along the diameter of the axis, after which the bottle is put on the rod so that it remains able to rotate freely. The rod is placed on the edges of the bucket. Optimally secure its position while maintaining mobility.

It is recommended to fill a bucket (you can also use a basin) with water. As bait, the bottle in the center is coated with any composition (attractive in smell to mice) (processed cheese, sunflower or peanut butter, etc.). After this, a “ramp” is built from the floor to the edge of the bucket. Having freely reached the edge of the bucket along such a “bridge,” the mouse tries to move onto the bottle, but the latter, under the weight of the rodent, turns around its axis and throws the pest into the container.

Glue traps

When choosing how to make a mousetrap with your own hands, you should not lose sight of the simple ones. glue traps. They will require special glue for rodents, which is sold in specialized stores, bait and bases (you can use thick cardboard, small plastic pallets, plywood, etc.). The base is smeared with glue, and the bait is placed in the center of the trap.

Getting to the fragrant “treat”, the rodent sticks to the viscous composition. Many consider the disadvantage of such a trap to be unaesthetic. It is no longer possible to unstick the animal from the mousetrap, and the sight of floundering rodents and their squeaking does not bring pleasure if the owners are at home.