DIY 5 in 1 ottoman. Stylish DIY ottoman

How to make an ottoman with your own hands without throwing money away? Of course, you can buy it at furniture store but looking at the cost simple product from chipboard, there is a desire to do crafts at home. If we consider furniture sets as a whole, then most of them belong to rather complex structures.

Experienced craftsmen can make something from this list with their own hands, and only the ottoman is made without special skills and knowledge from improvised means. A practical item will be obtained when you choose a durable and high-quality upholstery fabric that can be wiped, cleaned, and washed.

Such materials include leather or furniture fabric sold in specialized stores. All that remains is to view step by step instructions for the manufacture of ottomans of various shapes.

So:

An ottoman for seating several people is comparable in height to an armchair and more like a soft bench. For the home, such a model is inconvenient and unnecessary, but in fitting and waiting areas it is very relevant.
An ottoman in addition to something with a certain height. From the definition itself it becomes clear that it is not an independent product, but serves as an application. Models that barely rise above the floor are not intended for sitting on, but are used as footrests for adults. Children love these things in miniature and enjoy using them in their games.
Complementing armchairs, sofas, beds, sliding under the table or being a component in a non-standard combination (beach cabin with pouf), ottomans firmly occupy a niche in furniture showrooms. One can say more, there is a fashion for designer items that make the interior fashionable, complementing it.
The video in this article introduces poufs with advanced features. Looking through it, you remember the plot of the film, when “with a slight movement of the hand, trousers turn into shorts,” and here the ottoman transforms into a full-fledged chair with a table, a bed with a lamp stand and other necessary items, while taking up a minimum of space.

Before you start making an ottoman with your own hands, you need to have an idea about this seemingly simple furniture family.

So, poufs are classified according to materials, design, functions and shapes:

On soft goods textiles, leather are used. It’s nice to throw your legs on a hand-knitted ottoman, and when the size allows, you can lounge on it.
Rigid ottoman designs are made from rattan, wood, often varnished, and cork tree bark.. Hard ottomans, made with your own hands, are not suitable for long-term sitting, but they bring liveliness and intrigue to the interior.

Attention: An ottoman is definitely a necessary thing, and its need is felt when entering the house, or rather, the hallway.

How to make, sew, knit and what design of an ottoman to choose is not an easy task. Ottomans can have exposed frames made of steel tubing or wood.
The ottoman may have a closed frame, and the legs are hidden under the frills of a decorative skirt. Such products are popular among the British and Americans.
Ottoman with barely visible legs when a chair is copied without armrests and backrest.
DIY ottoman with back- not only a comfortable chair for members of the whole family, regardless of body weight, but also excellent support for a sore back.
What could be simpler than an inflatable ottoman?, consisting of a textile cover with a zipper and an inflatable chamber inside it? Ottomans differ not only in materials and designs, but also in shape.
DIY square ottoman, round, triangular, combined from different geometric shapes, can be made from available materials.

Tools at home

How to make an ottoman yourself if you don’t have the skills or desire to saw, cut, or twist? Craftsmen offer a lot of ideas and proposals that are brought to life. The work of making a cute ottoman is not difficult, but quite exciting, and a thing made with your own hands radiates a special warmth and has an aura of home comfort.

Soft ottomans

The most simple circuit How to make a soft ottoman with your own hands is as follows:

Two circles are cut out of fabric with a diameter equal to the diameter of the upper and lower parts of the product.

Tip: When cutting out parts, remember to leave seam allowances.

Two are cut out rectangular parts one size:

width of the height of the pouf;
length equal to half the circumference of the top and bottom of the pouf.

Rectangular parts are sewn together on one side along the width to obtain a long ribbon.
One of the circles is basted to it and sewed along the seam.
The same is done with the second circle.

Tip: If the seam is not too even or neat, it is trimmed with a decorative border.

The resulting pouf cover is stuffed with any suitable material.
A zipper is sewn into the unstitched edges remaining in the rectangular tape.

The photo shows a diagram of how to make a pouf in the simplest way.

In a similar way, you can make an ottoman in the shape of a cube. The difference is in making the pieces, which must be square in shape, and to make the sides you will need to make four pieces of fabric rather than two.

Then:

The details fit together.
To more clearly indicate the edges of the cube, you can use a canvas of a different contrasting color.
A denser fabric will provide additional strength and elasticity.
Such a pouf can be filled with padding polyester and foam rubber. These materials hold their shape perfectly and do not deform.
The hole for stuffing the material is made at the bottom of the pouf so that it is not visible.
If desired, it can be stitched tightly after stuffing the pouf, or a zipper can be sewn in so that the material can be replaced if necessary.

Sewing an ottoman

The video in this article demonstrates the procedure for sewing an 8-piece ottoman. To do this, a sheet of paper is folded in four, a template is drawn on it and cut out according to the diagram below.

The unfolded template is fixed on the fabric and the cutting of 8 pieces begins.

Attention: It is not necessary to purchase new fabric for the pattern; you can use old deposits of knitted clothes and old sweaters.

The photo below shows that the sharp end of each hexagon is bent inward by approximately 5-6 cm and stitched on a machine, which makes it possible to obtain an octagonal hole for stuffing the finished product after assembling all the elements.

The blanks are attached to each other in pairs with a distance from the edge of approximately 1 cm. The pairs are folded with the front side so that the seams are on the wrong side; when sewn, there are 4 segments of 2 blanks.
In the same way, they are sewn together in 2 sections and you get 2 halves of the future ottoman.
The halves are connected to each other by machine, the cover is turned right side out.
The ottoman is stuffed with prepared filling (holofiber, foam rubber, padding polyester), and the hole is closed with a lid of the appropriate size. The edges of the lid should already be finished, and it is manually, carefully sewn on top of the stuffing hole.
The instructions for beginners recommend sewing an ottoman with literally three seams. Why are 2 circles cut out, the diameter of which is about 50 cm, or 2 squares, if you prefer? sharp lines. Geometric figures will serve as the top or bottom of the future product.
A strip of the same material or another is cut out in a size corresponding to the length of the circle or the perimeter of the square; the width of the strip depends on the height of the ottoman. The height of the ottoman, in turn, is selected depending on the function that the product will perform, whether it is a footrest, a seat in the hallway, a toy for young children, or a structure in the living room.

Attention: The cutting of the strip for the side of the ottoman is done taking into account seam allowances.

The work is done in such a way that the seams are on the wrong side, the strip is sewn first of all to the bottom of the product and only then to the top.
After stitching all the seams, the ottoman is turned right side out and stuffed.
Using the same patterns presented above, covers for the ottoman with a zipper are cut out for the first option and for the second. This will allow you to wash or clean the cover in the future without unnecessary problems and time-consuming, and not solving the problem of how to cover an ottoman with fabric if it is already made of fabric.

Reliable base for plastic bottles

There are unlimited quantities of plastic bottles in every home. Take, for example, beer and water bottles with a capacity of 1.5 - 2 liters; their color in the finished product does not matter, and they will help unload debris in the yard and house.

To make a good, stable ottoman you will need at least 16 1.5 liter bottles or 9 2 liter bottles.
Cardboard packaging from household appliances also waits its turn and is not thrown away for years, but what if the refrigerator breaks down, how do you take it for repairs? The video in this article will show how cardboard is used to make an ottoman from plastic bottles.

You need to stock up on tape, foam rubber and upholstery material.

Hot glue gun, zipper for case.

Attention: From round bottles you can make an even larger circle, square or rectangle, that is, the shape of the product is chosen according to your preferences.

For ease of use, if a very large ottoman is planned, the bottles are connected into separate sectors and sections with tape, and then the formation of the overall structure begins.

If the future product is planned to be round in shape, then the ottoman should be made starting from the middle.
To do this, take a bottle and, using radial movements, attach new elements to it, which are carefully fixed to each other with tape.
After completing the circle, cut out the base from thick cardboard. It should be slightly larger in size than the bottle structure.

The cardboard is also secured with several layers of adhesive tape. There is no need to dwell once again on the point that 2 bases must be prepared, and everything is clear.
Now it’s the turn of the soft upholstery, for which two parts for the top and bottom are cut out of dense foam rubber, which are glued in place.
From the remaining part of the foam rubber, according to the dimensions of the circumference line of the side part, a rectangle is cut out, which is wrapped around the pouf.
The final stage of sewing the cover from furniture fabric, preferably with a zipper. This operation will not only allow you to easily remove the cover for washing, but also make several options and update it from time to time. appearance of your product.

Ottoman from grandma's rarity

How to make an ottoman out of a stool so that grandma’s rarity can serve for many more years?

Indeed, a well-knit stool made of durable wood, painted oil paint, may please the owners for many years, but the appearance does not correspond to the modern environment. Remodeling will help bring balance to the interior old stool in a stylish ottoman.

The stool structure is pre-strengthened with self-tapping screws.
The legs are shortened a little - do not forget to check the level so that the ottoman does not wobble later.
The frame of the future ottoman is assembled using 4 sheets of plywood. They are attached with self-tapping screws to the legs of the stool.
The fifth sheet of plywood is screwed from below and serves as the bottom of the future craft.
The foam for the seat is cut out with an allowance of 5 cm.

Attention: The upper part of the ottoman is coated with glue, then the foam rubber will not bunch up into an untidy lump over time.

The upholstery fabric on the seat is attached together with the foam rubber using staplers.
Foam rubber can be attached to the sides with slats, which help to give round shape ottoman and make it more beautiful.
The rest of the structure is covered with fabric and secured with staples.
The wheels are screwed on or, as in the photo above, the cute little legs of the updated stool peek out from under the flirty upholstery.
The problem of how to make an ottoman from a stool was solved in a short time.

For those who like to knock

The rich Russian language raises many associations and questions. How to knock, where to knock, when to knock? For those who like to hit a nail with a hammer, we suggest making an ottoman with your own hands from boards and chipboard.

Rectangular pieces of 40x30 cm from chipboard are pre-prepared in the amount of 4 pieces.
A circle with a diameter of 30 cm and 4 wooden blocks.
Wood glue.
Furniture wheels with special fasteners.
Metal corners, screws.
Foam rubber and upholstery fabric.

How can you see the set? necessary materials not much different from each other when we make an ottoman with our own hands, even in different ways:

A box is assembled from rectangles. Metal corners and self-tapping screws are used, all corners of the structure are aligned, they must be straight.
The bars on which the wheels will later be located are fixed with glue on the lower part.
A base is attached to the top in an individually selected shape.
The finished frame is upholstered using the same technology using foam rubber, fabric and a zipper on the cover.

For lovers of knitting and stuffing

How to make an ottoman with your own hands that is frameless and therefore soft. Needlewomen who know how to crochet will be able to knit a soft ottoman much faster, but not everyone may like their appearance.

Lovers of working with knitting needles imagine interesting models ottomans connected specifically to them:

To work, you will need the thickest knitting needles that are available in stores.
For knitting needles with a diameter of 9 mm, fairly thick wool is suitable.
Ordinary threads offered in stores are too thin. The price for them is not high, but due to the fact that you will have to make thicker ones out of them, weaving them together, you will have to purchase enough a large number of, which will add to the cost of the product.
You can, of course, cut, unravel, twist unnecessary knitwear, which takes a lot of time, and even find it at home required quantity plain knitted clothing that has become unusable is quite problematic.
It seems that the solution to the problem of how to make an ottoman with your own hands has reached a dead end, but cotton clotheslines caught my eye.

Attention: Synthetic clotheslines are not suitable for this job, and cotton ropes are difficult to buy in small towns.

For a soft ottoman of sufficient size, you will need 20-30 of these ropes, which are tied into a long rectangle.
The side is tied together with rope to create a spacious, wide skirt.
The bottom is tied with a rope of the same color and you get a bag that needs to be stuffed with something. There are 2 options here - use old items neatly stacked on shelves in the closet or go to the store and buy foam rubber or holofiber.

Unnecessary old items make the ottoman heavy and not as round and fluffy as those made from store-bought materials, but it frees up space in the closet for new clothes.
The top of the ottoman is decorated with the same rope and you can try out your product.

Ottoman from an old bucket

Here's another one interesting solution, for which we will need: an old plastic bucket, a thick jute rope, a hot glue gun, a stapler, scissors, a cabinet handle, Velcro tape, upholstery fabric and a few new microfiber cloths. You will also need cardboard, but it will be better if you replace it with thin plywood.

First, wash the bucket and remove the metal handle.

Next, use hot glue to glue outer surface buckets with a rope, starting from the bottom.

Cut the end of the rope and hide it carefully.

Place the bottom of the bucket on the cardboard and trace it. Lay out the upholstery fabric according to the intended pattern and cut round blank with a release of 5 centimeters.

We make a hole in the center of the cardboard and fabric. We pass a bolt from a furniture handle through them and screw on the knob.

Next, we roll the fiber into tubes and radially wrap the bolt between the cardboard and paper, creating a kind of roll. To prevent the fiber from unwinding, we securely fix it with glue.

Then the fabric is stretched and secured on the reverse side with a stapler.

To hide the cardboard marks, cover the back of the seat with another piece of fabric, which needs to be placed on glue.

Cut the Velcro into four equal pieces and stick them crosswise onto the bottom of the bucket and the base of the saddle - with the bristles towards the bucket and the fluffy part towards the seat. Connect the two parts. Hooray! The ottoman is ready!

The result is something like this useful craft, on which you can sit comfortably.

Various options provide the opportunity to solve the problem of how to make an ottoman yourself from scrap materials that are available in abundance in any home. The only thing I still wanted to focus on was the floor in the room.

Laminate is quite sensitive to mechanical stress, so it is better to make an ottoman without wheels and legs, that is, with solid bottom. On soft covering, carpet, ottomans on casters are appropriate, but for tiled flooring there are no restrictions, unless forged legs can be an exception.

Chipboard ottoman

In one toast, the hero of “Prisoner of the Caucasus” expressed the very essence of existence, so that “our desires coincide with our capabilities.” Eat free time and the desire to make an ottoman with your own hands from chipboard, you need to prepare the possibilities.

Tools and necessary materials are stocked in advance.

A good ottoman cannot be made without a good base made from a sheet of chipboard. The optimal size of the structure is within 400x400x500 mm.
You can make a wooden ottoman using a simplified technology, making a frame in the form of a mailbox from a timber and screwing it on with the side cuts, but since the ottoman is being made for yourself, you can try.

Work with pleasure

You should not start work in a bad mood: something will fall on your foot or you will hit the wrong nail with a hammer.

5 squares of 400x400 mm are marked and cut from a sheet of chipboard to make the walls of the structure and the bottom.

Attention: The bottom of the ottoman should not be made of plywood; small children like to hide in secluded corners and can break thin plywood and get injured.

The lid can be made in any geometric shape: square, round, oval. Beginners can skip experimenting and stick with a square lid. It will have dimensions slightly larger than the main box 430x430 mm, in order to protect it from falling inside.
The height of the finished product is made up of its constituent elements - the height of the structure is 400 mm, plus the rollers are 50 mm, the bottom and tire are 32 mm thick, the upholstery is 50 mm thick, for a total of 532 mm.
From the prepared elements, the formation of the structure begins.
The sides of the ottoman are fastened with metal corners. The beams used to glue all the internal corners will help increase rigidity and reliability.
WITH front side The ottoman itself is screwed into the beams, the heads of which should be recessed into the wood, so as not to have problems with torn upholstery later.
The lower part of the box is coated with wood glue along the perimeter, capturing the ends of the beams.
The bottom of the ottoman is attached, and the cuts themselves are again screwed into the ends of the beams. Assembled structure should dry well.
The base of the ottoman has been made, but there are still no wheels and a lid on which you can sit in the future.
The lid is secured with 4 bars screwed from the inside. The work is carried out after you are sure that the lid closes smoothly and the side reinforcement bars do not interfere with the closing of the lid.
The finished structure is turned over, and the wheels are attached using the cuts themselves.

Attention: They are fixed through the bottom to the ends of the beams, for which small holes are drilled in the bottom.

Before continuing work, you need to make sure that the resulting structure is sufficiently stable, holds the person sitting on it well and there are no shortcomings that would interfere with further work, otherwise there is no point in starting the upholstery.

The ottoman gets dressed

A do-it-yourself ottoman made of wood, chipboard, or generally soft needs clothing on top. This function is performed with honor by high-quality upholstery fabric, neatly attached to the frame of the structure.

First, the cover of the ottoman is made, for which a soft lining is cut out from foam rubber, padding polyester, and batting. The size of the pad should correspond to the parameters of the seat so that it is neatly glued into place without drooping.
From the fabric intended for upholstery, a blank is cut out to be somewhat larger in size than the lid. This is done so that the edges can be folded under the lid and secured from the inside with a stapler or furniture nails.
The instructions instruct you to further design the sides of the ottoman.
The part is cut out from upholstery fabric 400 mm x 4 = 1600 mm with a margin for connection. Also in height, the material must have an allowance at the top and bottom.

Attention: The fabric must be straightened, stretched, tucked inward, and the edges must be secured with furniture nails or a stapler.

The seat is decorated, the niche is upholstered, all edges are neatly closed and you can present ready product for control by discerning family members.
A do-it-yourself plywood ottoman is made according to the same pattern if you choose this simple design option.
The work becomes a little more complicated when an opening drawer is provided on the ottoman, then the stop bars are replaced with door hinges.

Getting acquainted with the design of this simple piece of furniture, one detail catches your eye: despite the difference in shapes of ottomans and their types, the base is a rigid frame, there is a seat and legs. They are decorated in different ways, but quilted leather or leatherette gives the products an elite, luxurious look and you cannot immediately determine that the price of the product is within reasonable limits.

Although, it should be noted that a neat ottoman, covered with a different material, can bring comfort and convenience to the room and looks no less elegant than a leather one.

When the old interior has become boring and you want changes, it is not necessary to start a renovation. Various additional items can change and enliven the interior. You shouldn’t immediately go shopping in search of something new and unusual. Don’t forget that you can create many masterpieces with your own hands at home. One of the practical and interesting things in the room is the ottoman. It comes in absolutely any shape, size, color.

You can fit it into any of the rooms and different styles. If you are wondering how to make an ottoman with your own hands, you will need a few useful ideas on this matter. But the main advantage of such an item is wide choice materials to create.

Ottoman made of multi-colored fabric

Sewing a bright ottoman from fabric is not a difficult task.

Before starting work you should prepare:

fabric of different colors;
lining fabric;
filler;
sewing machine;
needle and thread;
2 large buttons.

You can use padding polyester or thick foam rubber as a filler. Then the pouf will be moderately soft and will hold its shape.

The first stage of work is the pattern. Draw a circle on paper the size you want the pouf to be. Divide this circle into 12 equal parts. Do you have fewer flowers? You can alternate them or divide them into 6-10 parts. The finished patterns are applied to the fabric and triangular pieces are cut out. Cut them out with a margin that will be used for stitching. The fabric for the lining is cut in the same way.

The next stage is stitching. Grab the petals of the circle together on the sides with threads, and then stitch them onto sewing machine. You should end up with two round multi-colored bases - top and bottom. They need to be sewn qualitatively from the inside out. Leave one part uncovered to fill the pouf.

The final stage is filling. Place inside the case required amount filler. The pouf will immediately become voluminous. There should be a lot of padding polyester or foam rubber so that the pouf does not significantly change its shape when pressed. Carefully sew the last part. And close the place where the petals are sewn in the center of the circles with large buttons. Do-it-yourself multi-colored pouf is ready.

Plastic bottles as a base for a pouf

Plastic bottles have many uses in everyday life. When a considerable number of them have accumulated, you can make an ottoman with your own hands.

You will need:

about 40 bottles including caps;
soft foam lining;
cardboard;
wide tape;
fabric for the cover;
needle, thread.

Take bottles with tightly screwed caps and use tape to connect them to each other so that they form a filled circle. You need to cut out 2 circles from cardboard. Their diameter should match the diameter of the bottom of the glued bottles. Tape the cardboard tightly to the plastic containers. The frame for the ottoman is ready.

Then you should prepare the foam for the lining. 3 blanks are cut out: 2 circles of the same size with cardboard blanks and 1 rectangle. It will wrap vertically around the ottoman. You can secure the workpieces using threads or construction stapler. All that remains is to sew a cover for the pouf from the desired fabric. This will not be difficult if you have minimal sewing skills. You can make a cute ottoman with your own hands quickly and cheaply.

Non-standard use of a plastic bucket

An old unnecessary plastic bucket can easily be turned into a useful and beautiful thing- in the ottoman.

For the ottoman you will need:

jute rope or rope;
construction glue gun;
cardboard;
textile;
stapler;
large button;
microfiber fabric.

A bucket without a handle should be turned over and wrapped tightly around with a rope. When winding, each stitch must be placed on glue so that the rope subsequently fits tightly.

When the task is completed, you can begin to build a soft seat for the pouf with your own hands. Take some cardboard, place it on the ottoman and cut out a circle the same size as the bottom. It is also necessary to cut a circle from the fabric, but with a larger diameter of 10 cm. Connect the fabric to the cardboard in the middle with a button. Roll the microfiber into a tube and begin wrapping it between the cardboard and the fabric around the button. Use a glue gun to secure. Roll the fabric until you reach the edges of the cardboard. Attach the top fabric with a stapler to back side cardboard The ottoman is ready, all that remains is to connect the lid and base using glue or Velcro tape.

Functional ottoman with a box inside

The task gets a little more complicated if you want to DIY and use the ottoman as storage space. Having a ready-made box will make the task much easier. But it’s also possible to do it yourself.

Prepare for him:

4 identical sized chipboard rectangles. They will be the edges of the pouf;
2 squares of chipboard for the base and lid;
wooden blocks for fastening and small legs;
screwdriver and screws.

If you do not have the skills of a carpenter, then it is better to ask a more experienced and experienced person for help when assembling the box. strong man. Assemble the structure from the parts, use screws and glue to secure it.

The seat is not attached to the ottoman; it should be freely removed and put on. To prevent the seat from moving during operation, stops are attached to it on the inside. It is necessary to attach the stops at such a distance that when removing and putting on the cover, they do not rub against the edges of the chipboard and do not touch the bars inside.

The frame of the box must be covered with fabric; it can be secured using a stapler. The inside of the box is also lined. Thick foam rubber should be placed under the fabric cover for comfortable sitting. This is how you get a practical ottoman with legs that will fit into any interior style. You just have to choose the right fabric.

Video gallery

An ottoman replaces a stool in living rooms and reception rooms, because... aesthetically better harmonizes with the cabinet and upholstered furniture. It is of Eastern origin, from harem effeminacy and laziness. The furniture makers of the sultans and caliphs came up with a chaise longue for odalisques, on the left in Fig. In more energetic and cramped Europe, the back was removed from it and the seat was made smaller, giving a banquette on the right. However, European grandees and cocottes certainly wanted at least a small, but personal boudoir, and through compaction, the banquette was transformed into a pouf - a soft seat without a back, round, square or other shape in plan, 40-60 cm high and the same in diameter.

Along the way, about the reasons for Eastern ingenuity

Such a piece of furniture as a chaise longue could only be invented in the East. According to local concepts, a person is more respectable the more he is idle, and busy preoccupation is vanity of vanities. For example, here's an anecdote. Two “new” Uzbeks are having a conversation: “You know, Rakhimbai, I have everything. There is wealth, there is an estate, there are nuker servants, there is a harem. But, Rakhimbai, I would like to become a snake!” - “Wai, wai, wai, Pulat-bek! What are you saying? So venerable worthy person- and wants to become some kind of vile reptile! Why do you need this, Pulat-bek?” - “But think for yourself, Rakhimbai! After all, she walks lying down!”

Which one should I do where?

Making a pouf with your own hands is not difficult; some types, see below, do not require woodworking at all, just cutting and sewing is enough. And if carpentry is needed, it should be simple and in a small volume, quite doable in a city apartment. It makes all the more sense to take on the job because store prices, as they say, are two circles ahead of the actual labor, material intensity and technological complexity of the products. The reason is simple: trade classifiers classify poufs, along with their relatives mentioned above, as luxury goods, the markups on which are not limited.

Just don’t immediately look for the sample you like and grab the tool. There are many types of poufs, and we need to make an ottoman for a specific room. In the process of their evolution, poufs have become highly specialized and almost every type is adapted to the conditions in a room for a specific purpose.

Classic frame pouf with legs, pos. 1 in Fig., placed in rooms with hard flooring. If flooring soft, then you need a soft ottoman, pos. 2. Its bottom will not rub against the carpet, rug or carpet, and the legs, which are not there, will not leave dents on it. Ottoman (by the way, chaise longues are often also called ottomans), pos. 3, can be made for any floor, because if there are legs, they will be covered with fringe. How, in fact, does an ottoman differ from a pouf as such, excluding oriental decor.

Very durable and comfortable Moroccan or Moorish pouf, pos. 4. It can also be made on a frame or whole-sewn, with or without legs. Unfortunately, a description of this product, which has excellent aesthetic qualities, but is quite complex, is beyond the scope of this publication. And in a bedroom with luxurious curtains, the final point of interior design will be a soft ottoman with puffs, or pouf-buff, pos. 5.

In service and reception rooms, the interior is usually laconic, but people come in wearing shoes from the street. In addition, hallways, halls and places common use they are planned according to the residual principle and do not suffer from excess space, but there are a lot of little things in everyday life. A square pouf-box on legs with wheels, pos. 6, or pouf-table, pos. 7. The difference between them, except for the finishing of the sides, is very significant; see below about poufs for the hallway.

Note: Amateurs also make poufs, sometimes from the most unexpected materials, which do not fit into any classification. One of the most successful examples will be discussed further.

Frame

The frames of classic poufs can be full or incomplete. Incomplete - just a wooden bottom with legs, on which a soft pouf is placed and attached to it; in essence, it is a soft stool with a thick seat on low legs.. Its disadvantage is that it has an awkward fit and a not very heavy guest can tear off the entire top, so classic poufs are often made on a three-dimensional frame made of a pair of identical horizontal boards/slabs - the frame of the pouf - that serve as support the seat and the entire pouf on the floor, connected by spacer stands made of timber, pipes, etc., or by a solid sidewall - a shell made of a fairly durable material.

Note: if the soft covering of the pouf, see below, is made of foam rubber from 40 mm, then the gaps between the spacers should not be wider than it double thickness. If the foam rubber is thinner, then a solid shell is desirable.

Hobbyists use anything strong enough to use as pouf frames: containers, spools of electrical wire or rope, buckets, etc., etc. However, it turns out to be cheaper and simpler, and with very high performance qualities, ottoman made of plastic bottles. Making its base is elementary: a package (assembly) of bottles of the same height is wrapped with tape, and drawers, which can even be cardboard, are also attached to it with tape, on the left in Fig.

Then - soft covering, on the right, covering, etc., see below. There is only one trick: if the drawers are cardboard, in the finished pouf the bottles should be oriented with their necks down, so the loads will fall more evenly on the weak material.

Step by step the frame pouf is made like this:

The frame is prepared in one way or another, see above and below;
They wrap it around the shell with foam rubber using PVA glue and use the same glue to glue the foam rubber onto the upper drawer. The thickness of the soft upholstery on the side is from 20 mm, on the seat – from 60 mm;
Cover the sheathing with padding polyester or batting, attaching it to the lower drawer with a furniture stapler;
An internal (holding) cover is sewn from durable hard technical fabric (tarpaulin, canvas, matting) with a processing allowance at the bottom of 40-60 mm;
Put on the holding cover and attach it with a fold over the allowance to the bottom drawer, also with a stapler;
Check the pattern templates for the decorative cover in place and, if necessary, adjust it;
A decorative cover is sewn with the same allowance at the bottom, but the allowance is turned up and stitched to form a drawstring sleeve into which the cord is threaded;
Try on the decorative cover, tightening it at the bottom with a cord and, if everything is in order, remove it;
Attach the legs to the lower drawer;
Put on outer case, tighten with a cord - the pouf is ready.

This method requires slightly more material and labor, but allows:

Upholster the pouf using patterns of questionable accuracy, because... all flaws will be revealed on the holding case.
Both covers are easy to put on, and the decorative one can be removed for maintenance or replacement.
The covers are sewn inside out and turned inside out before putting them on; V in this case there is no problem of the external scar of the last seam, because this seam itself simply does not exist.
The last seam does not need a zipper.
A pouf in a double cover will keep its shape better.

Note: The pouf pattern in this case consists of only 2 parts - a round insert on the seat and a strip on the textile shell (sidewall).

About the kings

The drawers of a classic pouf are made of plywood, solid wood, textolite or other durable plastic. Metal ones should be disc-shaped, with the recesses facing each other, otherwise the casing will quickly rub against their edges. Chipboard is quite suitable for making poufs, see below, but not for drawers: this material in slabs with a completely free edge crumbles along the edges.

About foam rubber

As stated above, soft upholstery poufs are most often made of foam rubber. Suitable for dense furniture; on the sides 20-30 mm, on the seat 60-150. The foam seat cushion can be glued together with PVA from several thinner layers. When buying, the quality of foam rubber is checked “by snapping”: it is squeezed tightly with your fingers and sharply released. The dents should straighten out instantly, literally following your fingers. If the foam expands slowly, it is not furniture, but insulation and is not suitable for padding.

Sewn

A one-piece round pouf is cut from at least 7 parts:

To the round seat liner is added the same one on the bottom, albeit made of cheap technical fabric;
The textile shell is divided along the length into at least 3 equal flaps, otherwise the seam (or two) will be overloaded and will soon begin to separate;
The bottom insert is cut from 2 halves with a zipper or a finishing seam with the scar facing outwards, because otherwise there is no way to put it on the filler, see below;
To the bottom, so that the lower circular seam does not quickly fray, glue a felt circle with superglue or “Moment”.

However, the absence of the need for carpentry work with their shavings and sawdust in a city apartment means a lot, so with soft poufs should be examined in more detail. Let's first consider their most important element - soft padding, and then individual successful designs.

Padding

Most poufs are stuffed with foam rubber of density (grade) from 40. The simplest way make the pouf stuffing - roll up a piece of foam rubber and wrap it in 3-4 places along the height with tape. How much foam will you need? There is no need to remember or look for how the length of an arithmetic spiral is calculated; shrinkage, tightening and creasing of the material will still not be taken into account by pure mathematics. Let's make it simpler: divide the volume of the pouf, calculated from its external dimensions, by the thickness of the sheet and the height of the pouf, everything should be expressed in the same units of measurement. As a result, we get the length of the cut.

A roll standing upright, as you know, can wrinkle at the end or break in the middle. So it's better to go to higher consumption material and cut into circles from foam rubber, adding 5-7% to the diameter relative to that of the pouf. The circles are cut until the height is obtained plus the same 5-7% or 1 circle. Glue them into a PVA filling block; highly desirable - with thin cardboard spacers, except for the upper circles with a thickness of 100-120 mm, so that the person sitting does not feel the cardboard.

In both cases, the cover is placed on the filler block. However, old rags are also suitable for filling the pouf; simply clean rags. The best ones are woolen, woven or knitted. They are tightly stuffed into the case; in this case the final seam can be very short.

Various ottomans

Now let's see how to sew an ottoman. In addition to round ones, patchwork multi-blade poufs are also considered classic. Pattern templates for them are shown in Fig. for 4, 6, and 8 wedges; multi-blade poufs made from an odd number of flaps turn out to be less durable, because one of the seams does not receive help in absorbing loads from the opposite one and diverges over time. The height and diameter of the poufs is 50 cm; you can change them proportionally by changing the grid pitch.

Templates are given in quarters: large leaf The papers are folded in four, the outline is marked, cut, and, unfolded, you get a template, as on the right in Fig. There is an allowance of 2x3 cm for the drawstring under the cord if the bottom is hard. By cutting out the templates along the red lines, we get an angular pouf, at the top in the center. In green - a pouf-pumpkin (joke, pouf-pillow), in the center. In blue there is a pouf with a wave-shaped profile, at the bottom there.

And on how to sew a patchwork pouf - a detailed master class:

Video: sewing a pouf from scraps

Note: multi-blade poufs with a relatively small number of wedges, 4-6, look much more advantageous if the outer cover is sewn on the outside with a decorative seam. The decorative seam does not have to be a simple zigzag snake, there are many of them different types, But that is another topic. And you will have to sew by hand - machines capable of making decorative stitches are very expensive.

The pouf ball is also quite easy to cut. Because it, unlike, say, a ball chair, is densely stuffed with filler; it is not necessary to sew it together from many polygons over which an uneven load will spread, although it is filled, like a bean bag chair, with foam or neoprene granules. The pattern of a pouffe ball with a diameter of 60 cm is shown in Fig. on right. The 8 outer stripes make up the equatorial belt, the 2x4 middle ones make up the middle latitudes, and the round inserts make up the polar regions. The filler is the same, foam or neoprene. Pour through 1 of the bottom zippered seams and stuff tightly.

Cut a bean bag ottoman, see next. Fig., already more difficult, because side edges det. 2 are formed by arcs of sinusoids. Most often, beanbags are made from old (or cheap second-hand) sweaters: the sleeves are turned inward, and the resulting openings are sewn up. Then an insert made of technical fabric is sewn into the bottom and stuffed with filling through the collar. Next, a decorative insert is sewn into the collar (open seam on knitted product almost invisible); perhaps a strap handle for carrying, and that’s it, the pouf is ready.

Neither this nor that, but not bad

A very good pouf is made from a tire. It has long been known to RuNet users, but just in case, here are some more photos of the main stages of work step by step, see Fig. It is only necessary to note that the product good quality only comes out when used glue gun, if you manually apply glue, the turns of the rope will never lie straight.

A modification of this idea is relatively little known: children's ottoman of 2-3 small scooter tires. It turns out softer and, for children's weight, proportionately elastic. The tires are glued together and additionally secured with a furniture stapler. Such an ottoman for a child allows him to run wild to his heart's content, without the risk of causing too much mischief and getting a beating for destroying the room.

To the hallway

There is a problem with poufs in the hallway: they get dirty from below, are scratched by the toes of street shoes, and are abraded by grains of sand carried in with dirt. Expensive, but by no means The best decision– a pouf with a durable washable cover, on the left in Fig. The bad thing about it is not only that it is expensive, but also that the wear-resistant plastics are slippery and uncomfortable to sit on.

The second way is a pouffe stool in the center. It is not necessary to have different legs, the main thing is that the legs are high and the seat is far from debris. However, at the same time, some volume disappears, which is not superfluous in the hallway. Warmer, as they say, a pouf-box (pouf-box) with a lid, on the right. But, firstly, it is difficult to make the outer cover of the box removable, and on high legs the useful volume is too small. Secondly, ergonomics. To get/put something down, you need to get up and bend over, which is inconvenient in the hallway, and unpleasant for someone who is cold or wet.

The good thing about a pouf-box is that its body can be made of chipboard and wooden beams, see figure:

The edges and ribs of chipboard slabs here are sufficiently strengthened, protected and do not crumble. But there is one important circumstance: you cannot shorten the top of the box rack so that the lid clamping bosses fit exactly at the corners; the hanging corners of the box will crumble. The clamps should be offset away from the posts.

The best option for a pouf in the hallway is a pouf-cabinet, see fig. on right. Wooden sides, double coated acrylic varnish, will withstand any onslaught of dust, and refinishing the varnish is easy. The ergonomics are generally excellent: if you place the pouf-bedside table with the door to the side, it is almost invisible, and you can take out/put down the contents without getting up, just by extending your hand.

Poufs

The knitted pouf looks chic, see fig. on the right, and it is generally easier to knit than a sweater. However, knitting stretches lighter than textiles and collects dust more readily. A pouf with puffs looks even more luxurious, but, as surprising as it may seem at first glance, if the puffs of the covering are assembled correctly, it turns out to be no less durable than a regular soft one and is easy to clean with a vacuum cleaner. To assemble the fabric into puffs, you do not need to know how to knit, and the whole work will take less time and require less stress.

For example, in the video below - detailed instructions, how to assemble pouf-buffs according to the “Scales” pattern.

Video: pouf-buff according to the “Scales” pattern

There are many other patterns for assembling puffs: leaves, braids, squares, etc. Having learned “Scales”, it is quite possible to understand them, and the ability to assemble puffs will be useful, for example, when sewing curtains. 15 types of pouf-buffs with diagrams are shown in the following video.

Video: 15 types of poufs

A soft and comfortable ottoman can become not just an interesting piece of furniture, but also a practical thing that takes up very little space. Depending on the design style of such a product, it can fit perfectly into any room design. In addition, making and decorating the interior with your own hands is a pleasant activity that will allow you to make it a reality. original ideas for home decoration.

This household item is multifunctional. An ottoman can become a decorative element, serve as a chair, or simply be convenient place for storing small things. And if a frameless option was chosen for its manufacture, it will work well as a toy. There are several options for making an ottoman yourself. Let's look at some of them in more detail.

Tools and materials

This example of work is performed on standard sizes pouf – 400x400x500 mm. To design the product you will need the following:

piano hinges – 2 pcs;
block 150x40x40 mm – 1 piece;
Chipboard with dimensions 1750x2400x16 mm;
upholstery material, 50 mm thick - batting, holofiber, foam rubber or synthetic winterizer;
furniture casters – 4 pcs;
thick fabric for decorative upholstery.

To make a pouf you will need the following tools:

wood glue;
ruler;
wood screws;
screwdriver;
pencil;
construction stapler;
hacksaw with fine teeth;
hammer.

DIY ottoman: step by step guide

Initially, you need to mark up work surface. Make the following preparations:

2 rectangular sections 370x400 mm - for the walls of the pouffe;
2 rectangular blanks 370x370 mm - for the side parts;
1 square fragment 400x400 mm.

Then start cutting out the fragments using a hacksaw.
Saw the existing timber into 4 parts so that each length is 370 mm.

Assemble a box from all the cut out fragments. The result should be a frame with a height of 370 mm.
Secure the beams with wood glue internal corners designs. This will give it rigidity.
Secure the corners of the frame with self-tapping screws outside. If desired, you can strengthen the structure with metal corners.
Then apply glue to the bottom of the box, as well as to the ends of the beams.
Glue the bottom and let the frame dry.
Then strengthen the structure with self-tapping screws, screwing them into the ends of the box.
Start making the lid. Screw 4 stopper bars along the inner sides of the perimeter.
Make sure that the stiffeners are installed correctly and do not interfere with the lid closing.

12. Then start upholstering the ottoman. In this process, rely on your imagination. Foam rubber, batting, holofiber or synthetic winterizer are ideal as upholstery materials.

13. The product is ready! This ottoman in the interior of your home will become not only a decorative element, but also a functional cabinet for storing things.

Ottoman made from plastic bottles

Objects that seem unusual at first glance are suitable as materials for a home ottoman. For example, plastic bottles. This is the most affordable way construction of a home pouf, which is highly decorative and practical to use.

Materials for work

For the workflow you will need the following materials:

bottles with caps - 40 pieces;
scissors;
foam rubber or synthetic padding for lining;
wide tape;
needles and threads;
knitting needles or crochet hook;
yarn;
stapler;
decorative fabric.

Manufacturing process

To build an ottoman from bottles, you need to take plastic containers (the lids must be tightly screwed on) and use tape to connect them in several layers.
The bottles can be fastened all at once, but for greater strength of the product it is better to fix them in packs of several pieces. And then fasten the resulting sections together again.

3. On next stage you need to make a bottom pattern from cardboard. To do this, place a blank with a circumference of 400 mm on the cardboard and trace it with a pencil.

4. Based on the resulting pattern, you need to cut out two blanks.

5. Then place them on both sides of the ottoman and secure with tape.

7. Using a staple gun, nail the foam rubber to the cardboard frame.

8. Foam pads are placed on the product and sewn together.

9. Start sewing the cover. Any thick fabric is suitable for this.

10. On final stage All that remains is to tie the top and sides of the ottoman, which at the end must be sewn to the bottom.

11. The ottoman is completely ready.

Making a spool ottoman

Diversify your home decor with a detail of a classic or rustic style You can make a ottoman sofa using a coil. This option will allow you to make a durable product that can be decorated to your liking. Thanks to this, the pouf will become an original addition to any room interior.

Materials and tools

Before you begin work, you need to prepare the following:

reel made of wood or chipboard;
Styrofoam;
glue;
foam rubber or batting;
textile;
cardboard;
construction stapler;
drill;
sewing machine.

Step-by-step manufacturing process

On initial stage you need to cut out parts from foam plastic that correspond to the size of the top part of the coil.
Use glue to fasten them together.
Next, we make a template to work with fabric, batting and foam rubber. To do this, draw a circle on paper, leaving “allowances” for the seams.

We treat the wooden circle with glue and attach a pre-cut circle of foam rubber.

After this, we wrap the structure with cardboard, fixing it with a stapler and adhesive.

Then wrap the pouf with batting and secure it at the bottom with a stapler. Do everything necessary measurements, remove excess pieces and proceed to upholstery with fabric.

After that, we sew a fabric cover and put it on the ottoman. Please note that the decorative upholstery should be taut, but not too tight.
Finally, you should drill holes and attach the legs to the plates.
The work is finished.

Multi-colored fabric ottoman

An ottoman that combines different colors will help fill the interior with colorful shades. Such a household item will allow you to add bright accents to the overall design of the room and make it more original.

Materials for work

To create such an original interior detail, we will need to prepare the following:

pieces of fabric of various but compatible colors;
fabric for lining;
filler material;
needle, thread;
sewing machine;
buttons of a sufficiently large size.

Let's start production

The first step is to create a pattern. To do this, you need to draw a circle with the diameter of the future product. The resulting circle must be divided into parts. First for 4, then each for another 3 fragments.
Using these details, we cut out pieces of fabric in the form of petals, leaving two centimeters for stitching.
We perform the same manipulation with the lining fabric.
The resulting elements need to be sewn on the sides.
Proceed with the construction of the lower part of the future product. It is advisable to use thick fabric for this.
From the wrong side, sew the bottom of the fabric pouf to the top. In this case, you need to leave one “petal” unsewn.
Then you should turn the fabric inside out and fill it with the prepared material.
Sew the product completely.
Conceal the seams with large buttons, sewing them in the center of the ottoman, top and bottom.

Ottoman in the shape of a ball

Bedroom ottomans add variety and complement any decor. In addition, to make this piece of furniture you will need the simplest and most affordable materials.

Preparing for work

To make such an ottoman you need to prepare the following:

polyethylene;
threads with a needle;
sewing machine;
fabric of two colors;
fiber filling material;
graph paper.

Execution steps

Using graph paper you need to make a pattern. Any round object, such as a large ball, is suitable for this.
We measure the circumference of the ball and divide the resulting data by 2.
Then you need to divide the resulting number by 5 so that the 2 outer fragments and 3 parts in the middle are the same size.
At the output we will get the diameter of the circle and the width of the stripes.
Then you should draw a line below based on the resulting width of the parts.
Cut out the bottom from polyethylene. Place it on the first strip and secure the edges with tape.
In a similar way we obtain the part for middle zone. We transfer the received details onto paper.
We make a pattern for the future product from different fabrics color range, while leaving 1 cm for the seam.
We sew the parts together, forming uniform stripes.
At the next stage, strips with round parts should be secured in series.
We leave the end of the middle strip unsewn and fill the product with the material prepared for this purpose.
We sew up the remaining hole with an invisible seam.
The ottoman is completely ready for use.

Making an ottoman from a sweater

Enough unusual solution The interior will feature a pouf made from a sweater. This piece of furniture will fit into any home design, especially for decorating a children's room. Let's consider more detailed master DIY ottoman class.

Materials and tools

To complete this work you need to prepare the following:

old wool sweater;
fabric for sewing a cover;
felt;
expanded polystyrene;
threads;
scissors;
igloo

Step-by-step instruction

We take felt and cut out a circle of the required diameter from it. This will be the bottom of our ottoman.
Then prepare the sweater for work: wrap it in inner side sleeves and sew up the holes.
Next, you need to sew a felt circle to the bottom of the sweater.
The next step is to cut a rectangle measuring 50x70 cm from the fabric.
We sew a cover from it, while making a hem on top. It will serve us as a lace with which we will tighten the neck of the case.
The resulting cover should be placed in a sweater and filled with polystyrene foam.
The last step is to tighten and tie the lace.
The pouf is ready to use.

Conclusion

Of the methods described above for making ottomans, you will surely find the one most suitable for you. Such convenient interior attributes carry not only practical, but also decorative functions. Ottomans with a back or frameless will make your life more comfortable and decorate your home environment. In addition, making your own interior elements is a completely suitable area for creative implementation.

A video tutorial on how to make a pouf with your own hands is presented below:

Updated:

2016-08-13

Many people today are wondering how to make an ottoman with their own hands. It is very profitable and original solution. After all, this way you can make the desired piece of furniture without spending practically any money. Finding material is not difficult. And you can choose the shape and design of the ottoman yourself, which is not always possible when buying in a store. There are many options for how to make ottomans for the bedroom with your own hands from scrap materials. The interesting thing is that you can make ottomans even without complex patterns. So, you can make simple and soft ottomans with your own hands. Let's look at some of the simplest and at the same time universal options for making this simple but necessary piece of furniture.

After looking at the photo of an ottoman for the bedroom, many will want the same one for themselves. In fact, you can assemble ottomans with your own hands in just a few hours. So, the first version of a DIY ottoman is the simplest. First you need to decide on the dimensions of the future product. Next, take large sheets of paper and, using a compass, draw a circle on them that will correspond to the diameter of the bottom and top of the ottoman (they should be the same). Along this circle, you should cut out two circles from the fabric that will then be used to upholster your ottoman. It is advisable to choose a dense fabric that does not “fall apart” and is securely stitched. It is very important to leave allowances of approximately 2 cm around the circumference.

Now let's move on to the remaining parts. It is necessary to measure the radius of the circle without allowances and measure this distance on another piece of fabric, then set aside a distance perpendicularly that will be equal to the height of the future ottoman. This will result in a rectangle. Cut out a second exactly the same rectangle. And again, on each side of the rectangles, leave 2 cm for allowances.

Now start sewing the parts together. First we work with rectangles. They need to be sewn together along the width allowances so that the result is one large long rectangle. Now you will need to sew the circle. It is sewn along the height of the rectangle slowly and carefully. The result is a cylindrical case that has no bottom. This cover can be placed on any ottoman. Or you can simply fill this case with a soft material like cotton wool.

The circle on the bottom of the ottoman is sewn at the very last resort when the inside is filled with soft material. And to prevent the edges of the circles at the top and bottom from fraying over time, you can attach a decorative ribbon to them.

Making a wooden pouf

A DIY master class on ottomans will make the task much easier. You will clearly see how the structures are made. But this is a more complex option - making wooden ottomans with your own hands, in which you can put all sorts of things.

To work, you need to stock up on screws, furniture wheels and metal corners in advance, wooden blocks, a sheet of chipboard for making the walls and bottom of the pouf, foam rubber, fabric for upholstery, as well as ordinary PVA glue.

So, first we work with chipboard sheets. You will need to do the following yourself. You need to cut 4 rectangles out of them. The height should be approximately 30 cm (which corresponds to the height of the pouf), the width of each sheet should be 40 cm. The sheets are connected using self-tapping screws or metal corners, as well as joints are coated with glue for greater reliability.

Now it's time to make the bottom and lid. To do this, a square is cut from the same sheets or from stronger wood to the size of the bottom for the ottoman (this must be measured first), after which the bottom is nailed to the frame using nails or self-tapping screws. The lid for the ottoman can be made separately. To do this from chipboards Simply cut out a square - slightly larger than the size of the pouf hole. It doesn’t need to be attached at all; it will be a separate part. If you want to attach a lid, you will need special hinges that will allow the lid to open and close normally.

So, the main part of the ottoman is ready. Now all that remains is to give it softness and cover it with upholstery material. To do this, foam rubber is cut out, the edges of which are coated with glue and pressed against the frame of the pouf. Please note that for the lid you need to use a thicker layer of foam rubber so that the product is soft.

When all the parts that should be soft are trimmed with foam rubber, it's time to cover the ottoman with fabric. The easiest option is to use a regular furniture stapler. It will be necessary to cut out pieces of fabric with a margin, so that later, by stretching the fabric and bending its edges, attach it to the tree using a stapler. This way the fabric will hold quite firmly.

To complete the work, all that remains is to attach the furniture wheels to the bottom. For this, self-tapping screws or self-tapping screws are used - it all depends on the model of wheels. And one more thing: the more heavy things you plan to put in the ottoman, the more powerful wheels you need to choose.

Pouf from an old sweater

Another option is a simple and neat ottoman made from an ordinary old sweater. To do this, first cut out the bottom of the ottoman of the desired size from felt. Then take old sweater, having previously turned his sleeves inside. There will be two holes in the sweater on the front side that need to be carefully sewn together.

Now take a piece of felt and just as carefully sew it to the bottom of the sweater. The result will be a kind of cover. Then you need to make the base of the ottoman. For this purpose, you can use regular dense foam. It is best to make a square ottoman, since in this case it will be much easier to measure and cut a rectangle along the height of the ottoman and a blank for the bottom. Then all the parts are glued together, after which the former sweater is pulled over the top onto such a base. Now all that remains is to make a hem at the top of the sweater fabric for the lace, sew the lace there, and after filling the ottoman with cotton wool, tighten the lace tightly.

So, several options for making an ottoman for the bedroom have been considered. There are many videos on the Internet that show in more detail how you can make such a piece of furniture with your own hands. Therefore, any woman, if desired, can transform an old pouf or make a completely new one. So, feel free to make a pouf with your own hands.