Hi all! Last week a client came in with a problem. The window stopped closing. We came, looked and were horrified. All mechanisms were clogged with construction dust. The apartment has just been rented out, without finishing.

We found out that when the walls were being tiled, the windows were open so that dust would fly out onto the street. However, dust settled in all the fitting mechanisms and became clogged there. Therefore, in the evening the owner of the apartment could not close the window. It’s good that he didn’t try to fix it himself, otherwise there would have been trouble. My employees carefully disassembled everything, lubricated the mechanisms and installed them back.

The window worked as it should! So if you have problems with the fittings, it is better to trust the professionals, so as not to overpay for replacing them with new ones. How to independently diagnose small problems and fix them yourself is my new article.

Swivel and tilt-and-turn fittings are installed on windows and balcony doors. With its help, you can open a window or door (swivel position) or place it in a tilt position (recline position), limited by the stroke of the scissors. As a rule, when closing a sash (door) using fittings, it is necessary to overcome the resistance of the seal.

Accessories for plastic windows can be divided into categories:

for pivoting sashes (doors)
for tilt-and-turn sashes (doors)
for folding (fanlight) flaps (doors)

The most popular manufacturers of fittings for plastic windows and doors are Roto and MACO

The leaders in the window and door fittings market are the German Roto and the Austrian MACO.

Roto fittings

Line of ROTO fittings:

Roto NT is the most popular turn-and-tilt fitting, with maximum corrosion protection (under top layer paint contains a base galvanic coating)
Roto NX – fittings designed for industrial (production) buildings and structures
Roto OK – tilt-and-turn fittings for regular (standard) windows and balcony doors
Roto NT Designo – fittings with hidden hinges for large (heavy) leaves (doors)

Application of a special nanocoating RotoSil Nano, which increases resistance to corrosion, does not in any way affect the flawless smooth, matte appearance window fittings Roto.

Installation of Roto fittings

Roto fittings are modular fittings. Broken modules can be easily and quickly replaced with new ones. The modules are connected using the patented Clip&Fit method. The modules are secured with screws.

MACO fittings

Thanks to its quality and wide range, MACO fittings for plastic windows and doors have proven themselves well. It should be noted the development of anti-burglary, as well as electronic fittings for plastic windows and doors.

You can increase the security (burglary resistance) of a plastic window by installing burglar-resistant strikers in the same place instead of the usual locking strips.

MACO has its own way of connecting and installing fittings onto a product of any complexity and shape.

To protect against corrosion, Silber-look coating is uniformly applied throughout MACO fittings.

Fittings for plastic windows and doors from the developer (in new houses)

Yes, of course, the happy owners of new apartments move in only after full state acceptance of the house.

However, in an attempt to save money, the developer, in most cases, installs plastic windows in new houses, which, to put it mildly, are not of very good quality.

But what should you do, not reinstall the windows immediately after moving in? Cheap fittings quickly fail, and window seals very soon cease to perform their functions. What to do?

The problem will be solved by adjusting the plastic window, repairing and replacing fittings, and if necessary, replacing the seal. Having completed the required amount of work, which the master will install on site, all residents of the new apartment will immediately feel the difference between BEFORE and AFTER.

The fittings of the plastic window (door) are broken. What to do?

An economical and reasonable solution to a minor breakdown will be to repair or replace an element of plastic window fittings. After all, manufacturers of window fittings have specially developed a modular system.

If one block breaks, it is easily replaced with a new one, as in children's construction set. In this way, the functionality of the entire window (door) structure is restored. In case of more serious damage, you will have to replace all the fittings of the plastic window.

The solution to any problems with your window will be to contact our company. Our craftsmen will quickly and efficiently adjust the window fittings, as well as replace and repair plastic window fittings.

Why do the fittings of plastic windows and doors break?

Main reasons

The main causes of breakdowns of fittings for plastic windows and doors include:

lack of regular maintenance
metal wear (fatigue)
excessive force
entry of foreign objects

Main malfunctions in the operation of plastic window (door) fittings

Methods for repairing fittings for plastic windows and doors

Malfunction	Possible damage	Repair method
The handle of the plastic window does not turn	the connection comb in the connection between the drive and the angle switch has jumped	hardware refurbishment required

The plastic window is difficult to close	the corner switch (a plastic window fitting element) is deformed (bent)	replacement of a fitting element (corner switch) of a plastic window is required
The handle of the plastic window (door) rotates	main lock (drive) is broken	The main lock (drive) needs to be replaced
window (door) opens in two positions	broken scissors/loop scissors	scissors/loop scissors need to be replaced
The top hinge of the plastic window (door) is broken	The top hinge of the plastic window is broken	The top hinge of the plastic window needs to be replaced
The bottom hinge of the plastic window (door) is broken	The bottom hinge of the plastic window is broken	The bottom hinge of the plastic window needs to be replaced

How can I determine what hardware I have installed?

Each module of plastic window fittings has a manufacturer’s mark (label, emblem). Open the window sash. At the end, near the handle, you can see the manufacturer's mark (emblem).

Do-it-yourself replacement of plastic window fittings

Is it possible to repair or replace plastic window fittings yourself? Why not. It is not the Gods who burn the pots...

While working, try not to completely break your window or door. Everything is simple only in videos on YouTube.

And when it comes down to it, a lot of nuances arise that no one will ever talk about anywhere. Our advice is to trust your windows only to experienced craftsmen who every day encounter and successfully solve certain difficulties that arise when repairing plastic windows!

It should be especially noted the recommendations of the manufacturers, who write in black and white in all accompanying documents (Care and adjustment instructions for rotary, tilt-and-turn, tilt-and-turn and tilt-up fittings; Fittings Catalog, etc.) that:

DO NOT use a window with broken hardware.
Damaged plastic window fittings need to be replaced URGENTLY
ALL work on adjustment, repair and replacement of plastic window fittings should be carried out ONLY by specialists!!!

Useful tips and tricks. Caring for fittings and plastic windows

Please note that the manufacturer even withdraws its warranty if this is not done periodically service maintenance accessories.

The fittings of a plastic window or door must be periodically (every six months) adjusted, cleaned of accumulated dirt with a soft cloth soaked in a soap solution, and lubricated with at least oil. sewing machines or simple machine oil or any other oil that does not contain additives.

After repair or construction work It is necessary to wash off construction dust from the fittings of a plastic window or door with a soap solution.

You should protect the fittings from damaging the surface with sharp objects, and also avoid prolonged contact with water - this can lead to corrosion.

Caring for a plastic window (door)

Even a simple ordinary soap solution will easily clean plastic profile your entire window, or you can use degreasing agents detergents. But only wash the plastic profile with a soft sponge, do not rub it with a hard surface.

It is strictly forbidden to use abrasive and aggressive chemical compositions(which contains chlorine, acids, alcohol and other additives that actively destroy dirt). Even if at first glance nothing happened, after some time the color of the plastic may turn from white to grayish-yellow.

A double-glazed unit in a PVC window is ordinary glass and needs to be washed like ordinary glass. Carefully, trying not to get detergents on the profile. It is important not to overdo it - so that the cleaning alcohol solution does not get on the rubber seal.

It is also important to clean regularly drainage holes at the bottom of the window frame. If you regularly give a plastic window a little attention, it will last a long time and reliably!

How to order repair or replacement of fittings for plastic windows and doors from the Cozy House company

By calling the manager of our company, you can order the replacement and repair of plastic window (door) fittings inexpensively in St. Petersburg (St. Petersburg) and Leningrad Region. A window repair specialist will arrive at the specified address at a time convenient for you.

Will do everything quickly and efficiently necessary work. The experience of our craftsmen allows us to guarantee that when correct operation Problems that have been resolved will not reappear for a long time.

Our specialists replace and repair fittings on plastic windows (doors) of many famous manufacturers windows VEKA (century), REHAU (rehau), Thyssen (thyssen), MONTBLANK (montblanc), GEALAN (gealan), KBE (kbe), Plafen (plafen), Deceuninck (deseninck) and others.

We carry out complete (or partial) replacement and repair of plastic window (door) fittings from manufacturers Giesse, Roto, Siegenia, Internika, Elementis, Hoppe, Albrio, Vorne, Huatau and others. The price for replacing and repairing plastic window fittings is quite affordable and significantly lower than complete replacement plastic window.

We employ only highly qualified professionals who will quickly identify and eliminate the cause of the malfunction. You can once again enjoy the flawless operation of your windows.

Timely repair of plastic windows in St. Petersburg will require a significantly smaller amount of money than their complete replacement. The complexity of the problem affects the cost of repairing plastic windows: the simpler the problem, the lower the price, especially difficult cases the price of window repairs is increasing.

Source: remontokon-company.ru

Do-it-yourself plastic window repair and adjustment

I have previously given recommendations on window care. Here we will talk about a situation when thunder has already struck.

Very often when making renovations in an apartment, when we open the doors wide open, we forget how to protect our plastic windows from the consequences. It is plastic ones, since simple ones, wooden ones, as a rule, are not equipped with such complex fittings.

This is exactly what happened to our clients. Towards the end of the renovation, one of the windows stopped closing properly. They called us. As one would expect, all the locking fittings were clogged with lime dust.

The only thing that saved people from completely replacing the fittings was that they did not try to make adjustments or repairs with their own hands. And we had to disassemble the window, wash and lubricate all the fittings.

ATTENTION! These works are NOT included in the warranty and are paid for. I think there is no need to explain why. But, in any case, it will cost less than buying new fittings. Well, if you have minimal plumbing skills, having learned the theory, you can repair and adjust windows yourself.

To work, you need to have a pair of screwdrivers, pliers, a pair of brushes (soft and hard), kerosene (or something similar) and lubricant.

ATTENTION! It is advisable to have a lubricant specifically for plastic window fittings.

As a last resort, you can replace it with any neutral (WD-40) or automotive WITHOUT additives.

And so, everything is ready - go ahead.

Remove the decorative trims from the hinges.
We disconnect the top loop.

ATTENTION! It is advisable to have an assistant to hold the sash while disassembling the hinge.

Then, tilting the sash towards you, remove it from the lower hinge rod. Keep in mind - the sash is much heavier than it looks.

We remove the handle. Rotate the decorative plate and unscrew the fastening screws.

For convenience, we place the door on the table. We carefully study and remember the location of all fittings. Let's start disassembling. We unscrew all the screws around the perimeter of the sash. Then (preferably together) we remove the mechanism. Wash it thoroughly on both sides.

It’s better to do it this way: cover the table with film, place any flat container (bath), and move the mechanism over it as you wash it. It is advisable to work together.

Then all the fittings need to be dried, using a hairdryer or a bicycle pump. We lubricate all moving parts without moving them relative to each other. The fact is, without knowing the principle of their interaction, it will be difficult to make the mechanism function.

We install the fitting mechanism in place, fasten it with self-tapping screws, and install the handle.

Lubricate the hinges on the box and install the sash. First we put it on the lower loop, then we connect the upper loop, insert the rod into it.

If everything was done properly, the sash should work without surprises. In extreme cases, you will have to make slight adjustments.

Good luck to you! If you have any questions, write.

Source: sam-okna.ru

Do-it-yourself plastic window repair

Quite often people come to us asking us to replace a broken handle on a window or balcony door, install a window opening limiter “comb”, or unlock a PVC window handle that refuses to turn.

Believe me, many malfunctions of plastic windows are not critical; you can fix them on your own without spending money or time waiting for a window repair specialist, whom you can call from us. On this page we will try to explain to you how to carry out repairs.

How to replace a window handle on a window?

If your PVC window handle base is cracked and requires replacement, or you have Small child, and you want him to be unable to open the window and for this you want to install a handle with a lock, then it is not necessary to order a plastic window repair service.

The job of replacing a window handle takes a couple of minutes and only requires a screwdriver and the desire to do the job yourself. Turn plastic cover the base of the handle is 90 degrees. There you will see the screws securing the handle to the window.

Unscrew them with a screwdriver, remove the old handle and attach a new one in its place with the same screws. When installing the “comb” opening limiter, it is necessary to install the “comb” ventilator regulator plate under the base of the handle.

Window handles, as well as ventilation regulators (combs), can be purchased at construction markets, in pavilions selling door handles or construction stores“Leroy-Merlin”, “OBI” cost from 70 to 200 rubles.

We install “comb” window opening limiters for 150-200 rubles, tilt-and-turn handles white-300 rubles, window handles with a lock, made in England, Poland - 900 rubles, children's lock - 1000 rubles.

Is the window handle stuck in the open position of the window, the handle does not turn, the window does not close?

In the open position of the sash, the handle was accidentally turned down and it was impossible to close the window, since the handle did not turn.

Don’t be alarmed, your window is not broken, the lock for turning the handle in the open position of the window just worked, and the handle was locked in the wrong position, which prevents the window from closing.

In modern window designs, many brands of fittings are equipped with handle rotation locks in the open state, or in the tilt-and-turn position; this is done for the good purpose of preventing the consumer from accidentally breaking the window.

But, there are cases when, when quickly performing an operation to move the handle from one position to another, this blocker is triggered at a completely unnecessary moment in time.

No need to panic. To repair PVC windows with your own hands, first determine the brand of fittings. To do this, find the name written on the metal lock.

If it says “AUBI”, then find a protruding thin metal plate with a spring in the area of the handle.

Press this plate tightly against the seal with your finger and turn the handle. If it doesn’t come out, then pay attention to what position the sash is in.

It is necessary that the sash is strictly in a vertical position, since if the sash hangs at an angle, the upper tilt-and-turn position lock will also block the rotation of the handle. So, by aligning the window and pressing the plate against the seal, you can easily turn the handle to the mode open position and close the window.

If it says “Roto”, “GU”, “Winkhaus” or something else, then try to find below the handle, a metal tongue sticking out at an angle towards the frame.

Here are the steps as above. Press the tab down with your finger until it is parallel to the sealing rubber and easily turn the handle to the desired position. There may be an unpleasant moment with the temperature deformation of the window.

The tongue may not touch the counter element installed on the window frame and, when closing the sash, it may slip past, therefore, without bending towards the seal and the handle does not turn.

Open the window and find metal part which the tongue should hit. Unscrew the screw or two screws of the locking element from the frame and place something between it and the frame, for example a plastic pad, or a thin screw. This will ensure the interlock between the blocker on the sash and the counter element on the frame.

Repair of Winkhaus fittings scissor lock

Over time, problems arise with the handle rotation lock installed in Winkhaus tilt-and-turn scissors. This friction lock wears out over time and the hardware refuses to lock.

The window handle only turns to the “open” position and upwards for ventilation. In this case, you cannot apply force to close the handle, as you can break the main lock gear. Either call a specialist and he will repair the fittings by removing the blocker for 1,500 rubles, or look at the photographs to see which element needs to be removed.

To remove the scissors, you must first remove the window sash. Remove the decorative trim from the top hinge and use pliers and a screwdriver to remove the pin. Lower the sash to the floor and unscrew the screws securing the fittings and remove the scissors. Then the blocker is removed, the scissors are screwed into place and the fittings work like new!

What to do if the plastic window closes tightly?

This could be due to either sagging of the sash or simply drying out of the lubricant. First, buy a universal penetrating lubricant - spray at any auto store.

Place a tube on the can and lubricate all moving elements well, especially the upper corner gears. If that doesn't help, try turning the adjusting screws on the hinges on the window.

Remove decorative plug on the bottom hinge and according to the diagram below, try to lift the sash by tightening the screw inside the hinge with a hex key. If you see that the upper corner of the sash is hitting the striker on the frame, then tighten the screw of the upper hinge as indicated in the instructions for adjusting the fittings.

How to adjust plastic windows to eliminate blowing from under the sealing rubber

Try to eliminate this by turning the trunnion eccentrics. If the window has “Roto” fittings, then pay attention to the counterplates on the frame.

In the middle there is a place where, by inserting a No. 4 hex key, you can turn the movable element, in the right direction. Determine where to turn at random.

If the window has “Winkhaus” fittings, then you need to grab the lock with two fingers, pull the eccentric and turn it in the desired direction, as in the photo:

If the window does not have “Roto”, but other fittings, such as “AUBI”, “Sigenia”, “GU”..., then you will see on the sash moving fittings elements in the form of rollers (trunnions) with a hole in the middle for a hex key No. 4. You will find a point on the edge of the video.

The closer to the sash seal you turn this point, the stronger the sash pressure will be. Just don't forget to summer time return the trunnion to its original position, otherwise the sealing rubber will quickly wear out.

You should also pay attention to the position of the movable pins on the sash relative to the mating parts on the frame. It is possible that the mating parts are positioned incorrectly and the trunnions do not extend beyond the mating parts when closing. In this case, the response plates must be rearranged.

Unscrew the screw securing the strike plate to the frame and move the strike plate lower so that the roller fits completely under the strike plate. If adjusting the eccentrics does not bring results, then call a PVC window repair specialist.

How to eliminate strong blowing of plastic windows from the hinge side?

This problem occurs on both sashes with tilt-and-turn fittings and sashes with turn-and-turn fittings. The first reason is poor-quality installation; the installers stretched the frame in the middle with an anchor and therefore the middle clamp on the sash does not work.

The second reason is that the straightening plates installed in the middle of the sash between the double-glazed window and the profile fell, or they were not installed in production.

A plastic window repair specialist will cure this problem in 10 minutes by removing the glazing bead from the sash from the hinge side and placing it in the middle between the double-glazed window and the profile required quantity straightening plates. How to remove the glazing bead from a PVC window with your own hands and stretch the window sash?

It is best to use a wide chisel or hard spatula to remove paint. Slotted screwdriver or the knife cannot be used, as it will ruin it appearance PVC profile. Leaning the tool against the junction of the glazing bead and the sash profile, disconnect the glazing bead with a light blow.

Then, pay attention to the straightening plates installed below between the frame and the sash. You also need to install plastic plates in the middle, moving the window sash away from the glass unit by 3-5 mm.

The plates can be made from a requisitioned school ruler from your favorite child. The main thing is that the width of the plates made by yourself is not less than the thickness of the double-glazed window, and during installation, one of the edges of the plate does not rest against the inside of the glass, otherwise the double-glazed window may crack.

You can move the sash profile away from the glass unit using the same chisel, placing a plastic spacer under the chisel on the glass side. Don’t be too zealous; first, move the sash away from the double-glazed window by 3 mm and try to close the window. If it’s not enough, then another 3 mm.

After reading our article, it seems that any man can repair plastic windows on his own at home, but, unfortunately, we had clients who, having read advice on the Internet on how to adjust plastic windows with their own hands, inserted a hex key into the top hinge mount and after turning the key, the door flew down to the floor. The consequences are a broken double-glazed window and sash profile.

Therefore, if you are sure that you understand exactly in which direction and which adjustment screw you need to turn in order to increase the pressure of the fittings, then the attempt is not torture, and saving money on simple repairs of plastic windows is commendable.

If you can’t adjust the windows yourself, then contact our service center for window repairs. Our experienced technicians are always ready to fix any breakage or defect in your window!

Source: palikprof.ru

Replacing fittings in plastic windows

Most Moscow apartments have modern and high-quality double-glazed windows that meet all requirements, but often manufacturers of plastic windows save on the cost of fittings, which leads to malfunctions of the mechanism and its failure.

Window fittings, thanks to which windows open, are subject to the greatest loads, so sooner or later apartment owners face the question of bringing window mechanisms back to normal. working condition. This problem can be solved in two ways: repair or complete replacement of PVC window fittings.

The need to repair or replace fittings

If your double-glazed windows have served you well enough for a long time, and adjustment no longer helps, it’s time to think about replacing the mechanisms. Replacing plastic window fittings is not an easy task, so it is better to entrust it to specialists. It is not recommended to carry out this work yourself, due to the mass of nuances and subtleties that can only be understood with experience.

Our window company has been successfully operating in the window installation and maintenance market for a long time. All our employees have highly qualified and are perfectly familiar with the features of window systems from all manufacturers. After completion of the work, we provide a long-term guarantee for all types of work performed.

Window hardware repair or replacement is required if your windows have the following problems:

the doors do not close tightly, and a draft enters the apartment through the remaining cracks;
V winter period windows may partially freeze;
plastic windows lose sound insulation.

A more serious violation of the integrity of structures, such as the penetration of dust and moisture, indicates an advanced problem with the mechanism, or poor-quality design of the windows themselves.

Only an experienced specialist who can make an accurate “diagnosis” and determine a list of necessary actions can determine the cause of the malfunction. In some cases, repairing plastic window fittings will help solve the problem, which will cost much less than replacement.

If the fittings are very worn and cannot be adjusted, they will have to be replaced. But in any case, the price of replacing fittings in plastic windows is incomparable with the price of installing new windows!

Typical hardware malfunctions

A comprehensive replacement of fittings is not always necessary and, often, you can get by with local actions. According to statistics, most of the problems in a plastic window are associated with sagging of the sash, dust and dirt getting into the mechanism, as well as failure of individual hardware parts - to eliminate these faults to an experienced master it will only take a few minutes.

The locking mechanism can also affect the operation of the window handle; its functionality is restored through adjustment.

The next item to consider is the window hinges. During operation, the hinges become loose and need adjustment or replacement.

Due to their low price, this service will not greatly affect the final cost of replacing window fittings. When choosing the mechanism itself, it is better to give preference to a brand that has proven itself to be a quality product.

The locking mechanism may also fail if your windows have a winter ventilation function.

In our work, we use locking window fittings from the world's leading brands, which guarantees the impeccable and long-term operation of your windows. The products of these brands are wear-resistant, resistant to moisture, corrosion, and chemicals.

The fittings are designed in such a way as to make the use of the window as comfortable and safe as possible - all elements work smoothly, while ensuring reliable locking of the structure for additional protection your house.

As with any work, there are several main stages:

Stage 1. Call a specialist. Call us by phone or leave a request on the website with a description of the problem.

Stage 2. Drawing up estimates for the planned types of work. Repair cost window sashes in Moscow consists of the cost of the components themselves and the work required for their installation. Thanks to cooperation with leading wholesale suppliers of fittings, we have the opportunity to change fittings at low prices.

Stage 3. You choose a convenient date and time for our specialists to visit. In a number of simple cases, when working with fittings comes down to only adjusting the mechanisms, one person is enough. In the event that PVC window fittings need to be replaced on several sashes at once, this requires two specialists.

Stage 4. After completion of the work, an acceptance certificate is signed, which indicates all types of work performed and guarantee period to newly installed mechanisms.

Additional window repair services

When ordering plastic windows, apartment owners sometimes save on additional finishing, since the prices for some accessories in a number of companies are very high. We offer the following types of work:

installation PVC slopes on plastic windows;
installation of window sills;
replacement of mosquito nets.

If the plastic window itself has become unusable and a new one needs to be installed, then the cost of fittings when replacing the plastic window will be calculated at a reduced rate.

Aluminum and wooden, replacement and adjustment of window and door fittings in Moscow and Moscow region from the company "Windows Reforma".

Entrust the repair of plastic window fittings to professionals

In general, such a service as repair of plastic window fittings is quite in demand, since PVC windows, unlike ordinary wooden ones, are equipped with a rather complex auxiliary mechanism. During intensive use, damage is common, and general wear and tear makes itself felt. In order not to aggravate the problem, contact professionals for a solution.

Window fittings usually mean the following parts: hinges, handles, corner switches, locks, opening blockers, rotary and tilt-and-turn mechanisms, microlifts. Failure of any part can lead to serious damage to the entire system. A seemingly insignificant violation of the normal movement of the sash can subsequently lead to deformation of the entire structure and increased repair costs.

Troubleshooting on your own if you lack the skills and professional tools may lead to negative results. To avoid this, contact our company, and your windows will last for a long time without any complaints. Specialists will approach the repair of window fittings with full responsibility, and in case of more global problems They will also repair plastic windows.

When replacement and adjustment of fittings is required

Violation of smooth opening and closing. Perhaps you only need to clean and lubricate the fittings, but a more serious reason may be discovered.
Sagging or distortion of the sash, its falling out. It is necessary to inspect, adjust and, if necessary, replace hinges and adjacent components.
Broken handle. One of the most easily fixable problems when it comes only to the handle itself. However, more serious problems are possible, because the entire opening/closing system is tied to it.
Inflating at closed window. The reason may be either a worn-out seal or the mechanism itself.
You can also contact us if you decide to expand the functions of the window: install a child lock (baby stop), install a handle with a key, a comb, or replace swivel mechanism on a tilt-and-turn

Prices for repairing window fittings

Name	Unit change	price, rub.
Complete replacement of fittings	sash	from 3500 to 6000
Installation (replacement) of a hinge on a window and balcony door	PC.	1200
Installing (replacing) a hinge on the front door	PC.	from 3000
Installation (replacement) of the main lock	PC.	from 1500
Installation (replacement) of the middle lock	PC.	from 1200
Installation (replacement) of additional clamp on the hinge side	PC.	400
Installation (replacement) of the strike plate	PC.	200
Remote opening rigid pull	PC.	from 8000
Remote opening flexible rod	PC.	negotiable
Remote opening with electric drive	PC.	negotiable
Opening limiter (comb) plastic/metal	PC.	300/500
Installation (replacement) of a white/brown window handle	PC.	from 400
Window handle with key	PC.	from 800
Children's castle	PC.	from 850
Balcony latch (taffy handle)	PC.	500
Handle on balcony door 2-sided with key	PC.	3000
Handle bracket on front door	PC.	from 2800
Installing a single-point lock on the front door	PC.	negotiable
Installing a multi-point lock on the front door	PC.	negotiable
Installation of door closer customer's material/contractor's material	PC.	1200/from 3800

Repair of plastic window fittings

Repair of window fittings for plastic windows

Having been repairing plastic window fittings since 2002, we have accumulated knowledge about the probable cause of its failure, depending on the brand.

It is no secret that development engineers make mistakes in their calculations regarding service life or the amount of permissible load. And quite a lot of time passes to correct errors and increase the reliability of parts. Therefore, manufacturers replace the manufactured accessories with new ones. This was the case, for example, with the main locks “WinkHaus”, where the gearbox of the main lock often broke.

Transition to new automatic equipment for PVC assembly windows at the beginning of 2000, caused the replacement of the old unreliable RotoCentro fittings with the new Roto-NT. Moreover, the upper hinge group, corner switches, middle and main locks have become of different sizes, similarly, changes in the size of parts have occurred in such brands as:

"Aubi"
"Aubi"
"Sigenia"
"Schuco"
"Wink House"
"MACO"

A number of brands, such as: “Pimas”, “AGB”, “SELVE”, “AUBI 300”, “PKD”, “Romb”, “SCHÜRING”, are either no longer produced or are not supplied to the Russian market. Therefore, if one of the plastic window fittings fails, you have to replace the entire set, which is not cheap and only professional craftsmen can perform this operation.

Do-it-yourself repair of plastic window fittings.

The search engine contains many pages on how to do DIY repairs. That parts are sold on any construction markets. But reading them, you will not find real information on replacing mechanisms, and only a few companies in the city sell the necessary accessories, and it is almost impossible for a private person to buy them at retail without knowing the required part numbers.

Regardless of wasting time on determining the brand of accessories, its article number in the catalog, or a trip to the Moscow region to the supplier’s warehouse, contact our service center. Our technician, having arrived at the scene of the breakdown, can install a temporary lock so that the window is locked, then we will purchase, if possible, the necessary element, or we will offer you the choice of replacing the old window fittings with new ones of excellent quality “Roto” or “Sigenia”.

Short time, high quality performance and low prices distinguish our service center from competitors. Our prices for repairing plastic window fittings correspond to those stated in the price list on the website.

The cost of repairing plastic window fittings

Works/components	List of work performed	Cost, rub.)	Time spent
Replacement of the clamping (reciprocal) strip on the frame of a plastic window (including the strip) / pcs.	Installing an uninstalled or replacing a worn-out striker on a PVC window frame
Repair of “Wink Haus” fittings lock for upper scissors	Removing the sash Unscrewing the fittings Removing the scissors on the sash Removing a blocker Lubrication, dust removal Installing fittings on the sash Hanging the sash on the frame Locking adjustment
Replacement of the main lock fittings, scissors, corner switches (excluding components)	Removing the sash Replacing a broken element Installing a new element Adjustment
Conversion of opening plastic windows from rotary to tilt-and-turn	Removing the sash Removal old part Installing a new element Hanging the sash Adjustment
Replacement of broken SCHUCO fittings for plastic windows from the BAMO company with new Sigenia	Removing the sash Removing the old part Installing a new element Hanging the sash Adjustment

Our advantages

Responsible attitude towards all types of work.
Objective assessment of all necessary work.
Use only original components.
Quality guarantee for all work performed.
Any forms of payment convenient for you and all necessary reporting documents.

Nowadays, almost every home has plastic windows. Like any other mechanism, they need care. Otherwise, the service life of the window is noticeably reduced. If the installation of plastic windows is carried out by a professional company with which a contract has been concluded, then it will be responsible for maintaining the window during the validity of the contract. Well, after its effect ends, you will either have to master the science of repairing and maintaining plastic windows, or again entrust this matter to specialists.

Repairing window fittings for plastic windows is one of the common problems faced by owners of houses and apartments. It is possible to repair window fittings yourself, but not always. Therefore, now we will tell you what problems may arise with the fittings, what you can do yourself, and what is better to entrust to the master of the Teplo Doma company.

Repair of window fittings: general information

To begin with, it’s worth saying that plastic windows can be fixed (they don’t open at all), tilting, turning, and tilt-and-turn. Fittings are present in all designs except blind ones. It is located around the perimeter of the sash; the mechanism is controlled using a handle. At first glance, everything is simple.

What is included in the concept of “accessories”:

pen,
a locking bar that presses the window against the sash,
scissors - responsible for tilting the sash,
upper and lower hinges that secure the window to the frame and are responsible for opening/closing the window,
axle - a roller that ensures a tight fit of the sash to the frame,
corner element - holds all structural elements together,
additional elements(additional corner strip, scissors, blockers, etc.).

If you are planning to repair plastic window fittings yourself, then you should study every detail and understand where the problem is and how to fix it.

In addition, the fittings of plastic windows are divided according to the load that they can withstand. Thus, mechanisms up to 50 kg, from 50 kg to 80 kg, from 80 kg to 100 kg, and more than 100 kg are distinguished.

When choosing spare parts for repairing window fittings for plastic windows, check them maximum load. If you choose the wrong element, the structure may not hold up, and instead of a working mechanism, you will get another problem. There are many such nuances, so if you are not confident in your abilities, it is better to entrust it to a professional. Our consultants are ready to answer any of your questions!

Repair of PVC window fittings: reasons

Window repair and replacement of fittings may be necessary in many cases. Let's deal with the most common problems.

Window handle repair. This problem is the most common. The window handle may crack or even break off. In this case, it can be replaced. If the handle does not open/close well, if it does not reach the stop, or if it is completely jammed, then there may be several problems. The blocker may have worked, and now the window is hanging, awaiting repair. This happens due to the rapid transfer of the window from one mode to another. The fittings may simply be clogged and require lubrication, cleaning or adjustment.

The window has fallen off its hinges or is blowing from the side of the hinges. If your window has fallen off its hinges, it is better not to delay in calling a specialist; here you will need the advice of a specialist and his skills. If it is blowing from the side of the hinges, then contact. In it we described in detail the problems and methods for solving them.

Window profile deformation. In this case, repair of PVC window fittings may also be necessary. Deformation occurs for several reasons, but only a master can find the problem and solve it as soon as possible.

Draft. A draft is the first call for repairing window fittings. Of course, it can leak for other reasons, but most often the problem is a loose fit of the sash. We advise you to read, then you will definitely understand the problem and know how to solve it.

Do-it-yourself repair of plastic window fittings

If you want to know how to repair windows, replace fittings, replace seals, then you have definitely come to the right place. Let's look at what you can do for your window with your own hands.

We have already talked about replacing the seal in. Repairing fittings is a little more complicated, especially if it involves not just replacing the handle, but deforming the window profile. Not all the work can be done by you; in some cases you will have to turn to specialists.

So, repairing window fittings with your own hands should begin with cleaning. It is this simple step that will help eliminate minor problems or at least find their cause.

Craftsmen recommend starting cleaning by removing the sash. To do this, remove the covers from the hinges and carefully knock out the axis of the upper hinge by hitting it from the top right, and then from the bottom. Pull out the axle and remove the sash from the top, and then from the bottom. Do everything extremely carefully, because the structure is quite fragile.

Place the sash on a large, flat surface (floor or table). Remove the handle. To do this, unroll its plug and unscrew the screws that are located under it. That's it - the handle can be pulled out. It's time to inspect all the mechanisms: check them for rust, dust or dirt, and defects. When carrying out simple repairs to window fittings of plastic windows, use WD-40 (this aerosol is very helpful in any situation) and a hard brush to clean and lubricate the mechanisms.

After cleaning, all that remains is to dry the cleaned parts. For this task, it is better to use a regular hair dryer or bicycle pump. You can begin assembling the mechanism. Remember that the performance of your window depends on how well you assemble the structure. If the mechanisms are not in place, you will not get good work from the window.

This is how you can easily repair plastic window fittings yourself. Of course, if you have the skills, you can do more complex work. But if they are not there, then repair of window fittings in Khimki can be ordered from the craftsmen of the Teplo Doma company. They will carry out repairs efficiently and on time.

Window repair and hardware replacement in Moscow and the region

If you have any problems with plastic windows, feel free to contact the consultants of the Teplo Doma company. They will help you understand the problem and suggest the most optimal solution. The company's craftsmen have been repairing plastic window fittings for a long time. And therefore we can say that our specialists will cope with any breakdown.

We will send the material to you by e-mail

Despite all the reliability of plastic windows, they periodically require preventive maintenance and sometimes repairs. Many jobs can be done with your own hands at home. To do this, you need to understand the principle of operation of the mechanisms, as well as prepare the necessary tools. In this review we will talk about the most common problems designs of window frames and ways to eliminate them.

Many repairs can be done at home

What tools will you need to repair plastic windows yourself at home?

You must first prepare a minimum set of tools:

screwdrivers with different tips;
4 mm hex key. It comes in every cyclist's kit;
WD-40.

Adjusting the PVC window sash when sagging

Sometimes when closing a window, the sash doesn't fit well into place. Most likely, the movable part of the window structure has sagged, and it is required.

Horizontally

To adjust the lower part of the movable PVC sash, you must perform the following steps with the lower hinge.

Open the window.
Remove the trim.
Install the key into the groove located at the bottom.
If it is necessary to move the moving part of the window to the left, the hexagon is turned clockwise, and, conversely, when rotated counterclockwise, the sash moves to the right.

For the upper part, all manipulations are performed with a loop located in the upper part.

Vertically

To adjust the moving part of the structure vertically, the algorithm of actions is as follows.

Open the door.
Remove the PVC trim from the bottom hinge.
Insert the key into the groove located higher and adjust the lift of the sash: clockwise - the window will rise, counter-clockwise - the window will lower.

Related article:

What to do when blowing

If you feel that the sashes are not pressed tightly and there is a draft coming from the window, you can check this with a candle, lighter or match, passing them around the perimeter of the frame. In any place where the light deviates, it means that repairs are required there, which you can do yourself.

Adjusting the clamping unit

First of all, to eliminate blowing, you can adjust the clamping unit. There are two options here.

The key is to change the position of all the eccentrics that are located at the ends of the movable structures. They only need to be rotated a few millimeters.
If it is impossible to turn the eccentrics, then you first need to slightly loosen the fasteners of the strike plate and move the assembly slightly.

All methods of adjusting hinge pressure

If blowing in the swing-out flap is felt from the hinge side, you must first remove the trim. Next, you should look at the shape of the adjusting screw located below. Then you need to pick up a screwdriver and, holding the sash from below with one hand, adjust the tightening mechanism to the right or left.

A video about pressing the hinges in case of inflation can be seen in the video:

If the moving part of the window is only rotating, there may be no pressing fittings installed on it on the hinge side. In this case, you should secure it with your own hands. Manufacturers produce two types of fasteners:

external clamping devices that are installed on the outside of the swing sash;
internal, they are installed from the inside of the sash.

It is first necessary to determine exactly at which points of the window structure it blows and mark these places. Further, all work is performed in the following order.

Illustration	Description of action
	Remove the lining from the hinges, move the pin, and remove the sash from the hinges.
	Install the outer clamp on the sash, the edge should not overlap the elastic band.
	The internal clamp consists of two parts. First, use self-tapping screws to secure the clamp to the inside of the sash.
	Place the window in place and secure the outer clamp to the screws.
	Cover the outer clamp with a decorative cover.
	Open the sash, mark the installation location of the counter part from the inside and secure it with self-tapping screws.

You can watch the whole process in more detail in the video:

Related article:

: possible problems, their causes and solutions, prevention of malfunctions of plastic windows, useful tips and recommendations are in this publication.

There is a misalignment in the profile - the straightening plates need to be replaced

Another one often occurs in everyday life a big problem- sash misalignment. There are quite a few reasons for this, for example, poor-quality installation, when window frame could be stretched by anchors, which is why the clamping units simply did not function. The second option: the straightening partitions were simply not installed in production or they fell. If the design is under warranty, it is better to entrust the repair to specialists.

If the service is not possible to restore the geometry by replacing the straightening plates, the algorithm of actions is as follows.

Illustration	Description of action
	With the window closed, draw a line at the top and bottom of the sash.
	Having opened the frame, measure the distance to the line. According to standards, it should be no more than 8 mm on each side.
	Remove all beads from the sash, starting with the vertical one, then from the adjacent corner.
	Remove the glass unit from the frame.
	Build bridges the right size at a distance of no more than 5 cm from the corner. Technology requires this. Then insert the glass unit into place.
	Using a plastic spatula, slightly push the glass unit and install bridges of the required size in all corners.
	Hammer the glazing beads in the reverse order until you hear a characteristic click and check the tilt-and-turn mechanism.

How to clean and adjust fittings when clogged

PVC window fittings require careful attitude, it can be called the “muscle” of the system. During operation, street and household dust gets into it. If repair work has been carried out on the house, its consequences pose a serious danger to the functioning of the entire structure.

Advice! Manufacturers recommend cleaning and lubricating the fittings and moving mechanisms of a plastic window twice a year: in spring and autumn, as well as after repair work. This will ensure the product a long and impeccable service life.

The sequence of cleaning work is as follows.

Remove the movable frame from its hinges.
It is most convenient to start cleaning with a vacuum cleaner, this will prevent dirt from getting even deeper into the grooves.
After mechanical cleaning Use a vacuum cleaner to remove any remaining dirt and dust using soft cloths.
Pour lubricant into the fittings. A special product should be used.
Place the sash in place.

Replacing the rubber seal yourself

The service life of the rubber seal is 5-10 years. Its wear is easily determined visually. When purchasing a new item, it is advisable to give preference German manufacturers, the quality of their products is always top notch. In addition, the rubber will have to be replaced both on the frame side and on the sash.

The work algorithm is as follows.

Illustration	Description of action
	Remove the sash, unfasten the scissors and remove the seal, starting from the top.
	Insert the sash seal into the groove of the profile with the protruding “leg”. You can't pull it. Installation always starts from the middle of the top. When joining, coat the edges with glue.
	Replace the scissors.
	The seal is removed from the frame from the corner.
	Insert the seal into the grooves. In this case, the thick side should be directed towards the edge of the frame. Glue the edges of the elastic band and put the frame in place.

The entire algorithm is presented in more detail in the video:

What to do when the PVC window handle is faulty

Another weak link in the structures is the handle. If it malfunctions, it will become impossible to open or close the moving part. The most common problems encountered are:

fasteners have become loose;
the handle does not turn well;
the unit is jammed.

Let's take a closer look at troubleshooting each problem.

The handle is loose

If the handle becomes loose, this means that the fasteners have become loose and the mechanism may fail. To work you will need a screwdriver and 2-3 minutes of time.

Pull the cover towards you and move it to the side.
Tighten any loose screws.
Put the cover in place.

Problems turning the handle

If the handle is difficult to turn, there may be several reasons for this:

The lubricant inside the mechanism has dried out. This problem is easily solved. It is enough to apply lubricant to all moving parts of the handle and pour it into the holes. Then you need to turn the handle several times so that the composition is distributed over all nodes;
clogged fittings, to do this you will need to disassemble the handle and clean it. If you can’t turn to specialists, you’ll have to act on your own. First of all, you need to photograph the mechanism. This will make it easier to determine the order of its assembly. Then, take everything apart, clean and lubricate. After this, reassemble the handle;
the mechanism has failed. To fix this problem, you will need to find a suitable mechanism and replace it yourself.

Jamming occurred

If the handle is stuck in the “open” or “closed” position, it means that the lock has been activated. It is installed in the mechanism in order to protect the structure from sudden breakdown, and, unfortunately, sometimes it works spontaneously and always at the wrong time.

In the open or closed position of the movable structure

You can correct this situation with your own hands. The procedure depends on the brand of accessories:

for “AUBI” fittings, the algorithm of actions is as follows: put the sash in a vertical position, find a plate with a spring on end side at the level of the handle, press it against the rubber seal, then turn the handle;
On the handles of other manufacturers, find a locking tongue on the end side. It is located at an angle relative to the opening window. To unlock, you need to turn it over to a vertical position, then you can turn the handle;
If the lock breaks or slips, to adjust it, you need to open the window slightly, unscrew the response mechanism, place any plastic pad under it and tighten it.

Another option for unlocking a window can be seen in the video:

In reclining position

If the handle is stuck in the ventilation mode position, most likely the element called the scissors has broken. The action algorithm is as follows.

Remove the movable sash from its hinges.
Install into prepared grooves top knot scissors
Turn the handle slightly to the side. Press the lock if the handle does not turn.
Check the correct functioning of the locking unit.
Reinstall the window.

If adjustment does not help, you need to lubricate the moving parts of the scissors special composition, for example WD-40.

What to do if the movable structure opens in two positions simultaneously

This can happen when the user starts to turn the handle while the window is open, and the lock will activate. The algorithm of actions is as follows.

Turn the handle up.
Gently, without additional effort, press the movable window design from above to the frame.
Holding the movable sash with your hand, lightly press the lock bar. At this time, the handle should be turned to the opening mode parallel to the window sill.
Check the functionality of the handle in different modes.

How to replace a PVC window handle

If the handle breaks or none of the adjustment options helps, there is only one way out - install another one. When choosing new fittings, pay attention to the following factors:

quality of the handle;
shape and color, which should be in harmony with the overall interior;
handles with a lock have appeared on sale - this is excellent protection against children, the mechanism will protect the window from unauthorized opening.

Let's look at the entire procedure for replacing the handle in more detail.

Illustration	Description of action
	Turn the handle parallel to the window sill.
	Move the decorative trim aside and unscrew the screws.
	Remove the handle from the plastic window.
	Take the whole pen. Holding it by the body with one hand, turn it at an angle of 90º with the other.
	Bend the cover and turn it perpendicularly.
	Insert the handle into the holes. It should fit exactly into the groove and fasten with screws.
	Turn the decorative trim to a vertical position.

You can watch the entire process in more detail in the video:

Advice! If decorative overlay closed type, you can’t move it to the side. There is a recess in the lower part into which you can insert a flat-head screwdriver or a file and pry it slightly. The bar will move away from the knot.

Damaged double-glazed windows - no problem, step-by-step guide to action

In more complex cases, a complete replacement of the double-glazed window or glass will be required. It is advisable to invite for such work professional specialists. If desired, all manipulations can be performed at home yourself.

Complete glass replacement

A double-glazed window is a sealed structure that consists of several sheets of glass. Sometimes there is a need to replace it. This may happen in the following cases:

glass is broken or cracked, respectively, depressurization of one chamber has occurred;
on glass surfaces condensation has appeared, and the desiccant rolls down in the form of yellow resin;
street noise can be heard in the room, it became necessary to install a noise-absorbing double-glazed window;
drafts have appeared that are not regulated by any of the above methods. Accordingly, heat is not retained in the room;
the structure has lost its tightness, or it is necessary to install a double-glazed window with a large number of chambers.

To replace a double-glazed window, you must perform the following manipulations.

Determine the marking of the glass unit, which is printed on the aluminum frame, and order a similar one from the manufacturer.
First, remove the bead from the vertical side of the glass unit, then the closest one from the free corner. After dismantling all beads, remove the glass unit. It is advisable to use a spatula and mallet when working.
Install a new double-glazed window, having previously laid the straightening plates.
Secure the beads until you hear a characteristic click.

How to replace glass in a double-glazed window with your own hands

Replacing glass in a double-glazed window requires certain knowledge and skills. Let's look at the whole process in more detail.

Illustration	Description of action
	Remove the beads around the perimeter of the glass unit.
	Remove the glass unit and place it on a horizontal surface with the broken glass facing up. Stationery knife cut through the sealant around the perimeter to the spacer frame.
	Extract broken glass from double glazing.
	Cut off the sealant layer at a slight angle, wipe the new glass with a cleaning agent, remove all dirt and place the washed side inward on the glass unit.
	Treat thoroughly with silicone to plumbing work all connections. Acrylic sealant used in in this case it is forbidden. Wait until it dries completely, cover the edges of the structure with tape, insert it into the frame, and install glazing beads.