Sliding wardrobe for the hallway: self-assembly. A detailed algorithm that will allow you to make a built-in wardrobe in the hallway with your own hands according to the proposed diagrams How to make a wardrobe in the hallway

November 2016

Anyone can set their teeth on edge when there is a mess in the house, as scattered things have an extremely annoying effect on household members. There is not always space to store property, so many owners solve this problem by installing a wardrobe. Convenient place its placement is in the hallway and bedroom. We suggest you learn how to make a hallway cabinet with your own hands, and to make the process of creating this piece of furniture more understandable, explanatory photos are attached to it.

Possible cabinet options

A sliding wardrobe located in the wall is widely used in homes, as it has an excellent ability to accommodate a sufficient number of things. It takes a small amount square meters and allows residents to move freely around the house. This cabinet plays a useful role in indoors, and it won’t be difficult to do it.

The most common types of sliding wardrobes can be viewed in the photo. For convenience, many owners place this structure, built into a niche, in the hallway. The main advantage of this building is the minimum cost, since the walls and bottom with a lid are already there and do not need to be built. With the help of a compartment, empty space that has not been used until now is filled.

A great way to install a closet in a hallway is to place it across the entire width of a blank wall. This is optimal solution, since a cabinet built into the wall in this way will increase the visual volume of the hallway if its doors are decorated. If the house has small dimensions, then this place can be used as a dressing room, while the size of the living space will not decrease.

Sliding wardrobes are often used in zoning one-room apartments. Similar buildings are common in penthouses, since there is no interior doors. This option is the most expensive of the others.

The most common type of cabinet is a separate structure, which can be made into a corner or placed closer to the wall. Such cabinets are created with doors that open on both sides so that access to the contents is as accessible as possible. On the Internet you can find many photos of cabinets and their location in the interior.

Built-in corner wardrobe
Built-in wardrobe
Double door wardrobe
Corner cupboard coupe

Materials

To make a cabinet, you must first choose suitable material, on which the progress of construction as a whole depends. To choose the right material, you need to consider its characteristics. Materials used in the assembly of the sliding wardrobe:

Wood is a traditional material from which furniture is made. It is great for regular wardrobes, but it is not profitable to use for a compartment. This material will warp because the cabinet built into the wall absorbs more moisture than that in the room;
Drywall is a good finishing material that has many possibilities. Since he is finishing material, it cannot be used in the manufacture of a sliding wardrobe. This is impossible due to the fact that drywall is a structure that must be firmly attached to something, and cannot be part of a load-bearing structure;
Fiberboard, chipboard - this is what you need to make a cabinet. The process of making it from these materials is extremely inexpensive and simple, and does not require high expenses. These materials have the characteristics of wood, but unlike it, they are resistant to moisture penetration. Experts recommend using chipboard, medium- and high-density fiberboard.

Many companies publish catalogs with photos of all materials. Having made your choice, you can proceed directly to designing the cabinet.

Cabinet design

When drawing up a project, the division of the cabinet into zones is carried out using partitions, which are measured by the width of the doors. It is generally accepted that the main place for filling a compartment is the wardrobe area, which includes rods with hangers and shelves for clothes and shoes. The rest of the space belongs to the utility block.

Design can be done using photo samples, or you can prepare it yourself.

Designing a sliding wardrobe using a special program
Approximate layout of a wardrobe

To make a cabinet, you need a number of parts:

one wall for the side (since the wall and floor will replace the rest);
internal partitions, the number of which is adjusted to the number of doors;
in order for the cabinet to look complete, it is necessary to make narrow strips of wood, which will give a noble look to the structure;
other details should arrange the shelves. The mezzanine is made for those things that are not often used. The remaining space is filled with shelves at the owner’s discretion;
if the tenant wants to do suspended ceiling in the hallway after assembling the cabinet, then it is necessary to develop a plan so that it does not interfere with this. A homemade U-shaped box will help prevent such situations from occurring. It will serve as the basis for the upper door rails. The box will need to be screwed to the ceiling;
During the design and drawing, you will need to measure the size of all cabinet parts to order, determining in advance where the edges will be applied to them. Places that are visible are covered PVC edge layer 2 mm, and others 0.4 mm thick. Parts that will come into contact with others do not need to be covered with PVC edges;
The most annoying problem that can arise is indirect walls. In this situation, you should not make hasty decisions and file cutting laminated chipboard jigsaw, as chips may form on the surface. At home, it is almost impossible to do this without damage, because this requires Circular Saw;
If, after sawing the sheet, the cut area opens, then it should be closed. You can glue an overlay U-profile, as well as a melanin edge;
the part located on the inside can simply be painted on the walls.

You can find many photos with examples of arranging a wardrobe.

Materials for the inner drawer
Shelf material
Accessories, guides for sliding wardrobes

For sliding systems, it is necessary to retreat 9-10 cm from the inside of the door so as not to damage the structure of the cabinet. The exception is the Versailles system, which allows for its installation close to the top rail. But in order to protect the cabinet from undesirable consequences, it is advisable to retreat 1 cm.

Cabinet assembly

You should begin assembling the cabinet by installing load-bearing walls around the perimeter, edging the opening with strips of laminated chipboards. Then you should attach the frame to the ceiling, floor and walls using dowels. The angle helps connect the parts to each other.

Installation of a wardrobe frame
Installing the wardrobe base

The optimal method for fastening parts is the use of Euroscrews, which are used in furniture assembly. But before using them, you first need to make a hole for them, which is impossible to make smoothly without any special instruments. For this purpose, there is a specially created drill for confirmation, which can be adjusted to the drilling depth.

If you are fastening to furniture bolts, then for added rigidity and greater retention it is recommended to use furniture dowels. They are screwed in with a hexagon.

Wardrobe assembly process

Fastening the shelves

Fastening can be done in several ways. Using corners to attach shelves is quite common and not aesthetically pleasing, so it is used in exceptional cases when other methods are completely unsuitable.

By means of confirmations, the shelves are securely attached to the cabinet walls, which guarantees the transfer of various heavy loads. But Euroscrews are used exclusively in places where no one will see them, since their appearance is spoiled due to the caps.

The eccentric allows the shelves to be securely attached to the wall. But in order to attach them, you will have to work hard. In addition, the screw cap becomes noticeable from below. In the photo you can clearly see what these or other mounting options look like.

Shelf mounting option
Attaching a shelf to a furniture corner

The most suitable option For fastening shelves there are shelf holders, which are accessories that provide stability to the part. When using this type of fastening, they are completely invisible on both sides.

Attaching a clothes rail
Assembling the box

Door assembly

The main procedure when assembling sliding wardrobes is sliding doors. When performing installation, it is not advisable to skimp on auxiliary material, since if it is of poor quality or there is not enough of it, then problems with doors sticking and falling out cannot be avoided. Laguna, Versailles and Aristo have established themselves as the most reliable and quality companies, manufacturing sliding systems. Their cost is very reasonable.

A sliding wardrobe is often equipped with two, less often three doors, consisting of a canvas framed with aluminum profiles from all sides into the frame. For a tight connection in any position, a special profile is used, which allows the frame not to be uniform (an example can be seen in the photo). According to standard measurements, thickness laminated chipboard sheet equal to 10 mm.

With help silicone seal A mirror or designer glass 4 mm thick can be inserted into such a profile. It is important to know that when using glass or mirrors for a door, you must purchase them with a special protective film, which, due to its elastic properties, does not allow fragments to fly apart during a strong impact. You can assemble the doors yourself or order them ready-made.

Wardrobe door assembly

Installing doors into a structure

It is necessary to hammer the horizontal profiles using a hammer made of rubber. Then you should fill the vertical handles, fastened with self-tapping screws, the dimensions of which are 5 * 30 or 6 * 35 mm. The top and bottom rollers must be installed before the final tie is made. To ensure that the fasteners are not noticeable, the holes for the screws should be made of two different diameters. The first is 9 mm (inside the profile), the second is 5 mm (under the screw leg).

Profiles located vertically and horizontally have differences. The ones that are vertical should have 3 holes, which need to be drilled one at a time in the top and bottom of the assembly, as well as in the place where the lower rollers are attached. Then the profiles need to be cut to the required dimensions and screwed using self-tapping screws. A door stopper is installed in the bottom rail.

Door suspension with bottom support rail

Before installing the door, it must be inserted into the far channel of the upper door guide, and then inserted into the lower channel. The second doors need to be installed in the same way. To ensure that there are no gaps between the doors, you need to stick a buffer tape.

Making a wardrobe in the hallway with your own hands is not difficult. All it takes is desire, perseverance and ready materials. After completing the assembly, you can take a photo and show this creation to your friends.

If you're tired of constant clutter and lack of storage space, you should think about a wardrobe. The most appropriate place for its installation - a bedroom or hallway. In the article we will talk about the wardrobe in the hallway, it is a little different from the usual one.

As a rule, the width of the hallway is small, so they install narrow furniture 45-50 cm deep, so as not to block the passage. You can safely subtract approximately 8 cm from the total depth - they will be eaten up by the width of the sliding door rails. If the hallway allows it, it is better to make the standard closet depth 60 cm to make it more convenient to store clothes on hangers.

The second difference: filling. If the main elements of filling a closet in the bedroom are shelves and pull-out laundry baskets, then in the hallway you need to provide space for outerwear, shoes, household goods and cleaning supplies.

View from the kitchen Glossy doors with a gray-beige pattern Section for outerwear and shoes (80 cm) Shoe shelf Wardrobe section (160 cm)
Household block (80 cm) Bright wallpaper inside View from front door The width of the corridor was 150 cm View from the entrance

Filling a wardrobe in the hallway

What contents and accessories can a wardrobe have?

- Shelves can be made from the same laminated chipboard, but you don’t need to skimp on the edges: melamine won’t last long.
- Tubes for clothes are used only in cabinets with a depth of more than 500 mm (for ease of use), and the hangers are located perpendicular to the back wall.
- For wardrobes in the hallway (less than 500 mm), the use of end hangers (pull-out) will be relevant. They can be mounted parallel to the back wall, but in terms of capacity they are inferior to standard clothes rails.

Wardrobe 40 cm wide Narrow wardrobe compartment in the hallway Cross bars for clothes diagram facades content

Drawers. Do not buy cheap white guides for 30 rubles, they will not allow you to open more than half of them normally. Ball slides are better (usually they are not painted), they allow the drawers to be pulled out completely without the risk of tipping over. The overpayment will be no more than 100-150 rubles. for a couple.
Shoe net is an important element of every hallway. There are multi-level and retractable ones.

The remaining elements, as a rule, greatly increase the cost of filling, and are rarely used.

Cabinet design

An example of filling a three-door wardrobe with an ironing board and a vacuum cleaner

When filling a cabinet, it is usually divided into zones using partitions according to the width of the doors. IN classic version The main filling space is occupied by the wardrobe section with a hanger bar, open and closed shelves for clothes and shoes. The rest of the space is occupied by a utility unit for storing an ironing board, vacuum cleaner and other things.

When designing, you can use special programs like “Basis-Closet” (it’s paid, but you can find other analogues, or do a good search on the Internet), and if you want, you can actually do everything on paper.

Since usually one wall of a built-in wardrobe is a wall, you will need a minimum of parts:

one full-length side wall;
1-2 internal partitions the full height of the cabinet, depending on the number of doors;
a narrow piece about 10 cm wide - to refine the remaining 3 sides of the opening (floor, ceiling and wall);
the rest of the details for arranging the shelves (almost always a mezzanine is made for rarely used things, and the rest is optional);

An example of a built-in wardrobe with one full-size wall. The connection between the sliding door and the wall is formed by a narrow strip of laminated chipboard.

Minimum distance from the inside of the wardrobe door to the beginning of the shelf in the Aristo and Laguna sliding systems is 9-10 cm. The Versailles sliding system allows you to make shelves close to the top rail, but it is recommended to retreat at least 1 cm.

- If you plan to have a suspended or suspended ceiling after assembling the built-in wardrobe, it is important to provide in advance a structure for attaching the profiles: lower it slightly top level doors and do not make them straight to the ceiling. This is done using a homemade inverted U-shaped box, which is screwed to the ceiling (it will act as a base for the upper door rail). The ceiling will already be attached to the end of the box.

Installation diagram of a built-in wardrobe and suspended ceiling

If you need to leave the possibility of dismantling the cabinet without replacing the suspended ceiling (or it is already installed), it is best to make the cabinet almost to the ceiling level and close the top with a lid. To prevent dust from collecting at the top, the gap is covered with a border.
In the drawing, it is necessary to calculate the dimensions of each part and determine the location of the edge and its thickness. There is information about this in detail in a separate article. In a nutshell: it is better to order edging immediately after cutting from the same company so that the factory PVC edge can be glued on. All visible places are covered with a PVC edge of 2 mm, and the rest - 0.4 mm. Those parts of the parts that will be joined to others do not need to be coated.
Another problem is crooked walls. Imagine: you ordered chipboard cutting, edging was done, home delivery was ordered, and at the time of installation you suddenly discovered that there was a gap of a couple of centimeters at the back wall. If you cut the finished sheet with a jigsaw, the situation gets worse. Of course, some of the problems will be solved by adding a PVC U-profile to the end, but it is still better to check the evenness of the walls in advance and, if necessary, level them. It is almost impossible to cut laminated chipboard well under a curved wall at home; for this you will need at least a circular saw with guides.
If it is necessary to cut the laminated chipboard and the cut area is exposed (the most vulnerable place for moisture from shoes, clothes, umbrellas), it is closed. At home, there are two options: stick the melamine edge with an iron or install an overlay U-profile.
You don’t have to finish the interior with anything, but simply cover the walls with high-quality paint in advance.

Selection of materials

For the walls of sliding wardrobes, standard laminated chipboard with a thickness of 16 mm is most often used. Of course, you can save money and use available materials, plywood and others, and then improve them: paint, glue, finish with leftover laminate, etc. But in such cases, the result will be appropriate.

To fill the blind doors of sliding wardrobes, laminated chipboard with a thickness of 10 mm is used.

The main material for making furniture is laminated chipboard, many people know about its harmful formaldehyde emissions. Edging allows you to reduce the indicator, but, of course, does not completely remove the discharge.
Many domestic producers the environmental friendliness of laminated chipboards is neglected to reduce production costs, and some of the types can exceed the maximum established concentration by up to 40 times. If we take chipboard from foreign manufacturers, for example, Egger with class E1, then they can emit up to 8 times more formaldehyde than recommended by GOST 10632-2007.
E1 class chipboards are no longer produced abroad, but only ultra-safe Super E class boards are used.
For the corridor and hallway, class E1 is ideal, but costs more than the domestic one (450-800 versus 350 rubles per square).

For doors, try to use non-marking materials. The most win-win option is a mirror, or a mirror with laminated chipboard inserts. It is better not to use sandblasting, as stains on such glass are difficult to remove.

Cabinet assembly

- Assembly begins by installing the main walls and edging the opening around the perimeter with narrow strips of laminated chipboard.

- The frame is attached to the walls, ceiling, floor with dowels.
- The parts are assembled together using corners. If you want to do it beautifully, use plastic furniture corners that will cover the screw heads. If the main thing is a reliable result, you can use small steel angles.

Best and modern way fastening parts to each other - use furniture bolts (Euroscrew), but they require preliminary drilling of holes, which is difficult to do by eye. To create holes, use a special confirmat drill (you can do without it, but you will have to use several drills of different diameters).
If fastening with euroscrews is planned, furniture dowels are used for additional rigidity and preliminary fixation of parts.
The Euroscrews are tightened with a hexagon, and plugs are inserted into the caps to match the color of the cabinet.
When the base of the cabinet is ready, they begin to install the partitions, and then the shelves themselves.

Fastening the shelves

Options for shelf supports made of plastic and metal

Shelves can be attached in several ways, we list them.

Corners - simple, but ugly. This method is good only in extreme cases when other types of fastening are not suitable.
Confirmats (euroscrews) - reliable, suitable for high loads, but they are used only in invisible places, so as not to spoil the appearance with caps.
Eccentrics are a good, but labor-intensive method, and the screw head (plug) will be visible from the bottom of the shelves.
Shelf supports – best option, they are not visible from both sides.

Sliding doors

The most difficult element of a wardrobe is the sliding doors. You can’t skimp on fittings here, otherwise you’ll suffer with doors jamming and falling out. In almost every city you can find domestic sliding systems from Aristo, Versailles, Polish Laguna, they are quite good for their price.

Attaching a 4 mm mirror to a profile using a silicone attachment

A wardrobe in a hallway usually consists of two, less often three doors. Each door is a leaf enclosed on four sides in a frame made of aluminum profiles. It does not have to be uniform, the parts can be combined freely, and a special profile is used for joining at any angle. Standard profiles are designed for chipboard thickness 10 mm.

A mirror 4 mm thick can also be easily inserted into such profiles, after first placing a silicone seal around the perimeter, which will add the missing 6 mm.

The main thing is to buy mirrors with a special elastic film that will hold the fragments in the event of a strong impact.

Can be ordered ready doors or assemble them yourself. There are no particular difficulties: you just need to put the material in a frame and tie it with screws.

With closed handle With open handle Sectional door Vertical and horizontal profiles

Assembly begins with transverse profiles. They are filled with a rubber hammer or through a wooden spacer.

After the horizontal profiles, vertical handles are stuffed and secured with 5x30 or 6x35 mm self-tapping screws. Before the final frame tightening, the upper and lower rollers are installed.

To prevent the fastening from being visible, holes for screws are made with drills of several diameters: first big hole 9 mm will freely let the cap inside the profile (if you look at it in section, you can see the compartment that will hide the cap). The second 5 mm hole is made under the screw leg (see photo).

The screw head will be hidden inside the profile. The lower rollers are screwed together with the bolts

Horizontal and vertical profiles are different. IN vertical profiles As a result, you should end up with three holes: one at the top and bottom for assembly, and one at the bottom for attaching the lower rollers.

Top rail fastening

The door itself will ride on guides that are mounted in the same plane at the top and bottom. The upper rails will ensure the doors are fixed relative to the depth, and the lower rails will ensure opening/closing. The lower rollers are most often made of plastic, have shock absorption in the form of a spring and a screw for adjusting the door height. The upper rollers have a rubberized surface.

Upper and lower guides in the Prestige system
Upper and lower guides in the Senator system

All aluminum profiles and guides are cut to size and screwed onto self-tapping screws. You will need to install a door stop in the bottom rail. If desired, closers are installed in the upper guides, which themselves will close the door completely.

To install the doors, first insert it into the far channel of the upper guide, and then insert it into the corresponding lower channel. Second doors are also installed.

Door installation

After installation, the lower rollers are adjusted along the vertical wall of the cabinet so that there are no gaps. Schlegel (buffer tape) is glued to the vertical handles.

Assembly of the kitchen and wardrobe - the most available options to test your skills. Such cabinet furniture does not require development special design or use non-standard solutions. You just have to choose the finished material, color and assemble it correctly.

Floor: - Walls: - Ceiling: - Wardrobe: -

30-10-2016, 16:04

Target: in a narrow passage and minimal hallway space, place a place to place current clothes, shoes, a small pile of accessories and a mirror for a family of 4 people. And do it as inexpensively and quickly as possible, in short, assemble the wardrobe with your own hands.

Attention: the calculation is made for a separate case. For other cabinet models, the scheme is the same, the only difference is in the costs and amount of material. To visualize and calculate dimensions, it is convenient to use our online wardrobe designer.

Tools you will need:

drill for confirmation
square
roulette
screwdriver
level
pencil
Straight arms

Expenses

cash - about 11,000 rubles
temporary - 1 day

Materials

We're going to Leroy Merlin, we buy components there and cut them as needed. If Leroy is not in your city, you will have to look in local stores.

Guide set 1383 mm - 1 piece
Sliding door, 2455x604 mm - 1 piece
Detail furniture laminated chipboard, 1200x300x16 mm - 3 pieces, cut exactly in half
Furniture part laminated chipboard, 2700x400x16 mm - 4 pieces, we saw them in height, as well as two pieces for parts with widths of 350 and 366 mm.
Furniture part laminated chipboard, 2700x300x16 mm - 1 piece
Sectoral laminated chipboard shelf, 350x350x16 mm - 6 pcs.
Schlegel - 5 meters, door stops - 2 pcs.
Confirmats (a lot), 16mm screws (a bunch) and furniture corners, 30 pieces

Assembly

Let's do pre-assembly corner elements. We combine sheets with a width of 350 and 366 mm, as indicated in the figure, and first tighten them with confirmations. It is convenient to do this on editing table, but in its absence, stools can also be used. Here we attach the sectors with 2 confirmata on each side. To ensure an even placement of the confirmations, it is recommended to make preliminary markings. For a wide sheet, one confirmation per sector is sufficient for now. We repeat the procedure on a symmetrical element.

WITH assembled structure remove the wide (side) sheet of chipboard (it will get in the way) and place the half-assembled structures against the wall. This should be done carefully so as not to scratch the ceiling or tear off the sector elements.

Again, more specifically, we collect side elements. At this stage, you can attach the entire structure to the floor and ceiling, if you are confident in the accuracy of the markings. Assembling a wardrobe with your own hands does not tolerate mistakes. When fastening, be sure to check the vertical installation

We install a vertical sheet 30 cm wide in the center of the structure. We install rectangular shelves, securing them with furniture corners to the vertical risers, taking into account the fact that these shelves are installed on the same level with the sector elements, the confirmations from the sectors will be hidden.

Now you can finally attach the structure to the walls and ceiling. The structure itself is quite massive and a pair of fasteners for each vertical element is enough - a total of 6 pieces.

We install the guide under the clothes and screw the hooks for clothes. The quantity is optional, but in practice a couple of hooks are enough in the corner, and 3-4 inside half the cabinet.
Cut the guides to the required length. You will need to saw off half of the top one - in connection with one door it is not needed, and it will not physically fit. The top can be secured, the bottom can be simply placed for now, its fastening will come later. Don't forget to put door stoppers in the bottom guide

We install the door in its place. We check that the door fits well into the upper guide and does not fall out of it. To lift the door, you can place a laminated chipboard strip under the bottom guide - sheets 100 mm wide are sold in Leroy. On small height can be raised by adjusting the rollers. We control the vertical installation of the door and finally secure the lower guide.

Now you can attach a schlegel and a mirror to the door if desired, install the door in place and use the screws on the lower rollers to adjust its position relative to the cabinet body.

Amazing! So we assembled the wardrobe with our own hands. Over the course of a year of operation, it performed just fine.

Anyone can set their teeth on edge when there is a mess in the house, as scattered things have an extremely annoying effect on household members. There is not always space to store property, so many owners solve this problem by installing a wardrobe. A convenient place to place it is the hallway and bedroom. We suggest you learn how to make a hallway cabinet with your own hands, and to make the process of creating this piece of furniture more understandable, explanatory photos are attached to it.

A sliding wardrobe located in the wall is widely used in homes, as it has an excellent ability to accommodate a sufficient number of things. It occupies a small amount of square meters and allows residents to move freely around the house. This cabinet serves a useful role in the interior, and it is not difficult to make.

A great way to install a closet in a hallway is to place it across the entire width of a blank wall. This is the optimal solution, since a cabinet built into the wall in this way will increase the visual volume of the hallway if its doors are decorated. If the house has small dimensions, then this place can be used as a dressing room, while the size of the living space will not decrease.

Sliding wardrobes are often used in zoning one-room apartments. Such buildings are common in penthouses, since there are no interior doors. This option is the most expensive of the others.

Double door wardrobe

Materials

To make a cabinet, it is necessary, first of all, to choose a suitable material, on which the progress of the construction as a whole depends. To choose the right material, you need to consider its characteristics. Materials used in the assembly of the sliding wardrobe:

Wood is a traditional material from which furniture is made. It is great for regular wardrobes, but it is not profitable to use for a compartment. This material will warp because the cabinet built into the wall absorbs more moisture than that in the room;
Drywall is a good finishing material that has many possibilities. Since it is a finishing material, it cannot be used in the manufacture of sliding wardrobes. This is impossible due to the fact that drywall is a structure that must be firmly attached to something, and cannot be part of a load-bearing structure;
Fiberboard, chipboard - this is what you need to make a cabinet. The process of making it from these materials is extremely inexpensive and simple, and does not require large expenses. These materials have the characteristics of wood, but unlike it, they are resistant to moisture penetration. Experts recommend using chipboard, medium- and high-density fiberboard.

Many companies publish catalogs with photos of all materials. Having made your choice, you can proceed directly to designing the cabinet.

Cabinet design

Design can be done using photo samples, or you can prepare it yourself.

Designing a sliding wardrobe using a special program

Approximate layout of a wardrobe

To make a cabinet, you need a number of parts:

one wall for the side (since the wall and floor will replace the rest);
internal partitions, the number of which is adjusted to the number of doors;
in order for the cabinet to look complete, it is necessary to make narrow strips of wood, which will give a noble look to the structure;
other details should arrange the shelves. The mezzanine is made for those things that are not often used. The remaining space is filled with shelves at the owner’s discretion;
if the tenant wants to install a suspended ceiling in the hallway after assembling the cabinet, then it is necessary to develop a plan so that it does not interfere with this. A homemade U-shaped box will help prevent such situations from occurring. It will serve as the basis for the upper door rails. The box will need to be screwed to the ceiling;
During the design and drawing, you will need to measure the size of all cabinet parts to order, determining in advance where the edges will be applied to them. Places that are visible are covered with a PVC edge with a layer of 2 mm, and others with a thickness of 0.4 mm. Parts that will come into contact with others do not need to be covered with PVC edges;
The most annoying problem that can arise is indirect walls. In this situation, you should not make hasty decisions and cut the chipboard with a jigsaw, as chips may form on the surface. At home, it is almost impossible to do this without damage, because this requires a circular saw;
If, after sawing the sheet, the cut area opens, then it should be closed. You can glue an overlay U-profile, as well as a melanin edge;
the part located on the inside can simply be painted on the walls.

You can find many photos with examples of arranging a wardrobe.

Materials for the inner drawer

Shelf material

Cabinet assembly

Installation of a wardrobe frame

Installing the wardrobe base

If you are fastening to furniture bolts, then for added rigidity and greater retention it is recommended to use furniture dowels. They are screwed in with a hexagon.

Fastening the shelves

Fastening can be done in several ways. Using corners to attach shelves is quite common and not aesthetically pleasing, so it is used in exceptional cases when other methods are completely unsuitable.

The eccentric allows the shelves to be securely attached to the wall. But in order to attach them, you will have to work hard. In addition, the screw cap becomes noticeable from below. In the photo you can clearly see what these or other mounting options look like.

Shelf mounting option

Attaching a shelf to a furniture corner

The most suitable option for attaching shelves is shelf holders, which are accessories that provide stability to the part. When using this type of fastening, they are completely invisible on both sides.

Attaching a clothes rail

Assembling the box

Door assembly

The main procedure when assembling sliding wardrobes is sliding doors. When performing the installation, it is not advisable to skimp on auxiliary material, since if it is of poor quality or there is not enough of it, then problems with doors sticking and falling out cannot be avoided. Laguna, Versailles and Aristo have established themselves as the most reliable and high-quality companies producing sliding systems. Their cost is very reasonable.

A sliding wardrobe is often equipped with two, rarely three doors, consisting of a panel framed with aluminum profiles on all sides. For a tight connection in any position, a special profile is used, which allows the frame not to be uniform (an example can be seen in the photo). By standard standards, the thickness of a chipboard sheet is 10 mm.

Using a silicone seal, a mirror or designer glass 4 mm thick can be inserted into such a profile. It is important to know that when using glass or mirrors for a door, it is necessary to purchase them with a special protective film, which, due to its elastic properties, does not allow fragments to fly apart during a strong impact. You can assemble the doors yourself or order them ready-made.

Installing doors into a structure

Making a wardrobe in the hallway with your own hands is not difficult. All you need is desire, perseverance and ready-made materials. After completing the assembly, you can take a photo and show this creation to your friends.

The built-in wardrobe is very easy to use, and therefore is very popular. A built-in wardrobe in a hallway or other room can be seen in the photo on our website. They save space as they fit even in small spaces. This is explained by modern doors for a built-in wardrobe, they are moved to the side, and therefore do not take up free space. There are models on sale with a built-in TV that are convenient and functional. You can see incredible products with TV, photos can be easily found here.

Drawing of a straight wardrobe

A cabinet built into a niche can be purchased at a profit or assembled yourself. If, after looking at the photo, you realized that a built-in wardrobe suits you better, carefully study the description below to understand how to proceed to achieve the desired result.

Today, there are several types of products of this type. This:

direct wardrobe to the living room – classic products, whose facades are laconic and universal in their design. The easiest way to make them is to decorate any room with your own hands. Coupe in classic style goes in a straight line. The problem is that it is difficult to give such products an original look; you can only try to work with the doors, equipping them with a mirror or adding paint to their design. It’s better to look at the built-in wardrobes in the hallways in the photo to understand whether such a thing fits into your interior;
built-in corner wardrobe. The main advantage is that corner wardrobe fits well into a relatively small space. A compartment in a small hallway is complex shape, because of which it is more expensive to manufacture corner cabinets. We calculate the costs and understand whether we can afford triangular built-in wardrobes or cabinet models;
radius models are becoming more and more popular, as their design is distinguished by style and originality. Provided a complex system functioning of doors, which significantly complicates the process of self-production.

Straight cabinet Corner cabinet Radius cabinet

Which cabinet to choose in the end depends only on your preferences, capabilities and availability free space. If you are a novice craftsman or craftswoman, it is better to give preference to built-in or cabinet furniture in the corridor, whose facades go in a straight line. Even small hallway Suitable for installing a built-in wardrobe.

Features of material selection

The process of creating a built-in wardrobe depends on the right choice. custom sizes, and its design. Most often, to make facades, options such as wood and lining are used. The first type is considered traditional and prestigious.

However, wood is not very suitable for a built-in wardrobe, because due to high humidity it may warp.

If this does not scare the master, then he should choose a straight-layer material without any flaws, well-seasoned and impregnated with a special substance, for example, heated drying oil or a special emulsion. Lining and MDF can be used without additional processing, however, there is another limitation regarding the frames of the door leaves. They should be collected based on wood parts, while observing the conditions and rules described above.

Do not forget that PVA can be used to connect clapboard panels, since grooves and tongues provide fairly reliable fastening.

Drywall can also be used to create a wardrobe in the hallway. It is quite easy to work with, in addition, it provides the master with a lot of new opportunities. Even amateurs, and not professionals, can make very good compartment lockers based on it. However, the material is different large mass and fragility, therefore more suitable for finishing. Laminate, MDF, fiberboard are the most suitable varieties. Creating a built-in or regular wardrobe based on them is a simple task, the implementation of which is accompanied by minimal costs time and effort.

The listed options have all the same advantages as wood, however, they remain resistant to gradients and humidity changes.

Wardrobe with photo printing

Modern stores offer doors with photo printing. They will make facades more stylish and presentable, and allow you to bring many ideas to life. All you have to do is choose the perfect sample. By making such a model, you will transform the hallway in the Khrushchev-era building.

How to quickly make a built-in wardrobe?

A classic style coupe is quite easy to make. Minimum expenses are required that can be quickly calculated. Such wardrobes include three walls, a bottom, and a cover. Step-by-step production The compartment in the hall includes several stages. This:

Acquisition of material at the preliminary stage. The options presented above are suitable for making a built-in wardrobe in the hallway with your own hands. Consider the design and operating conditions to make right choice. Calculating the parameters will allow you to determine how much material will be needed for the job. It will be easier to create a built-in wardrobe if you use a calculator.
Internal filling. Here you need to follow a valuable rule: necessary and small things should be located right in front of your eyes, and valuable ones should be in drawers. It is not advisable to install a section for outerwear in the center of the structure, since the moisture from it will spread to the sides. It is better to embed it on the side so that humidity in a natural way leaked out.
Making your own door designs, which are considered the most important elements designs. First you need to decide how many leaves there will be, what width the doors should have, and what suspension design to choose. The width of the door should be such that the overlap does not exceed 50-70 cm. You should not experiment with dimensions, otherwise difficulties may arise when using the door.
Choosing a suspension method. Today there are several options: double-rail with a lower support, double-rail with a support located on top, and monorail.
Selecting a shelf layout, calculating their length and depth. The same hanging options as for cabinet types of furniture are not suitable for a built-in wardrobe. It would be more rational to build a strong frame into the niche, however, this is a rather complicated and expensive procedure. Easier to use special system customizable suspension. Its use greatly simplifies the task of a craftsman who plans to make a built-in wardrobe with his own hands. If the calculation is too difficult task, then he should choose a ready-made system.
Preparatory work carried out above the niche.
Measuring dimensions and creating a diagram. Here the basic parameters are calculated, on the basis of which drawings of a sliding wardrobe equipped with small cabinets are made. If you are planning to make a coupe, the dimensions should be listed under each element. It is very important to carry out the calculation correctly, since repairing built-in wardrobes is a very difficult task.
Purchasing fittings and materials suitable for the product being installed. This will allow you to give the integrated products the desired design.
Calculation and production of blanks.
Assembling a built-in wardrobe in the hallway in Khrushchev. If you have any problems performing this work, you can always watch a training video or a suitable picture, which clearly shows how the individual parts are installed and performed complete installation built-in wardrobe. Probably, after this there will be no questions left about how to assemble a built-in wardrobe with your own hands.
Installation structural elements provided for by the plan.

Making a full-wall closet for a room or repairing an old interior element at home is simple work, the main thing is that the calculation is done correctly. Following step by step instructions, you will easily cope with the task. Finished design can be supplemented with mirrors, patterns or drawings. A mirrored double-leaf version in the hallway will look very presentable. In the living room it is wiser to put a wardrobe with a built-in computer desk, whose photos can be found on our website.

Wardrobe with computer desk

Examples and ideas for various types of decorations can be easily found here. The site is full interesting ideas, which have the opportunity to be realized. You can upgrade the device and make your own wardrobe with a built-in TV. Designer models cannot compare with a built-in wardrobe created to individual sizes.