DIY children's table and chairs. DIY high chair

Purchased furniture for a child’s room, especially from natural materials, can be quite expensive. In a store or online, you don’t always find exactly the option you like. High chair and you can create a wooden table yourself. The work will not be difficult if you prepare all the necessary parts and tools, use your ingenuity and imagination. The reward for the work is a unique product, as comfortable as possible for the baby and practical in home life.

You can create a children's high chair and table from wood yourself.

A DIY chair will cost much less, and one made according to your own sketch will meet the intended parameters and the required degree of comfort for the baby.

The reward for the work is a unique product, as comfortable as possible for the baby and practical in home life.

All details from natural wood can be purchased in specialized departments of construction stores. They will select boards and bars of the required sizes for you.

A DIY chair will cost much less.

A child's high chair, created with one's own hands, is high-quality furniture for a child. In the process of work, you take into account the dimensions of the seat and backrest, which are as comfortable as possible for a growing baby, and check the strength of the structure directly at home.

All natural wood parts can be purchased in specialized departments of construction stores.

Created by yourself wooden high chair you can decorate according to your taste, and not be satisfied ready-made solution purchased furniture.

They will select boards and bars of the required sizes for you.

Required materials and tools

To create a chair you will need various materials. Individual parts will be made from them. First of all, these are wooden blocks and boards from which the frame, seat and back are assembled. Instead of natural solid wood, you can use chipboard or plywood, but these materials are not durable. For fastenings, take sufficient self-tapping screws. You will need medium-hard sandpaper.

A child's high chair, created with one's own hands, is high-quality furniture for a child.

Dimensions of bars (length):

• support legs – up to 20 cm;
• seat frame connecting strips – up to 20 cm;
• backrest lintels – up to 20 cm.

A wooden chair made by yourself can be decorated to your liking.

During the manufacturing process, the thickest bars with a cross-section of 5x5 cm are used for the legs. For the planks, parts are taken with a diameter half the size of the supporting ones.

For the planks, take parts with a diameter half the size of the supporting ones.

The parameters of the seat board (height and width) should also not exceed 20 cm. The back part may be slightly higher, but preferably no more than 30 cm.

• they are less durable;
• The environmental friendliness of such products has not been 100% proven.

The parameters of the seat board (height and width) should also not exceed 20 cm.

To make a chair with your own hands, you need the right tools:

• screwdriver;
• screwdriver;
• jigsaw;
• hacksaw for wood.

The dorsal part may be slightly higher, but preferably no more than 30 cm.

The assembled chair will “require” original decor. In addition to the carved option, you can use paint or other materials to apply a design or appliqué. To accurately apply the image you will need a stencil.

The assembled chair will “require” original decor.

Deciding on design and construction

For a wooden product, you can come up with any option. A highchair is usually made with straight supports and the following forms of the back structure:

• solid square or rectangular;
• wide truncated cone;
• straight through (with jumper bar).

To accurately apply the image you will need a stencil.

Creating a product with your own hands requires careful preparation. You must first make a sketch of the project. Visually draw a diagram of the connections of all parts separately with calculations of sections and lengths. Following the sketches, you will recreate the model in reality with exact parameters. A chair that has all the right dimensions will fit the baby and will not create any inconvenience.

For a wooden product, you can come up with any option.

Certain models are created with the expectation that the child will sit behind common table along with other family members. In this case, high legs are chosen for the product, which are not attached exactly vertically in relation to the seat and floor, but more widely. The lower part of such a chair will look like a truncated cone, connected for stability by wooden blocks around the perimeter. The top part will be approximately 30-35 cm below the table level.

A children's high chair is usually made with straight supports and the following forms of the back structure

If you have certain skills, you can assemble a folding product. Such items can be easily removed if necessary into storage areas.

For selected design solution parts are processed in accordance with it.

Manufacturing process: step-by-step instructions

After preparing a drawing with exact parameters, we begin to assemble a simple child chair little boy

1. Calculate the length of the legs exactly according to the diagram, saw off the excess with a hacksaw.
2. Cut out the jumper bars to size that will secure the frame in the seat area.
3. Connect them with supporting structure. Add furniture glue for reinforcement.
4. Attach the pre-sized back and seat using self-tapping screws.
5. All wood parts must be cleaned with sandpaper to avoid roughness and burrs.

A chair that has all the right dimensions will fit the baby and will not create any inconvenience.

If the parts are disproportionate, “adjust” them according design scheme using a hacksaw. To make the chair you created with your own hands comfortable, ask your baby to sit on it, ask how comfortable he is.

If all sizes were determined correctly, the child will like it New furniture. To ensure the parts are smooth, sand the surface again.

Certain models are created with the expectation that the child will sit at a common table with other family members.

To varnish the product, use only safe compounds - a special coating for children's furniture, environmentally friendly and having the appropriate certificate.

The top part will be approximately 30-35 cm below the table level.

After exterior finishing varnish, let the chair dry thoroughly for a day or two. Then you can start decorative finishing, if such is intended. If it involves carving, then varnishing is done after completion artistic treatment and sanding parts.

Decorating a chair

Use a jigsaw for carving. You can make a decoration in the form of a flower by cutting it in the center of the back, or any geometric figure. First, mark the area of ​​the future decoration with a pencil so that the carving is even. Parts such as legs and back can be carved. The corners of the seat can be rounded using a jigsaw and sandpaper.

During the manufacturing process, the thickest bars with a cross section of 5x5 cm are used for the legs.

The top can also be made not strictly rectangular, but a truncated cone, rounded, compound. In the latter option, you will need additional bars and cross bars - one or two. They are secured using special holes at the junction with the dorsal frame. It's pretty labor-intensive process, but if you wish, you can choose this option.

For fastenings, take sufficient self-tapping screws.

All steps for processing parts must be performed before the chair is assembled - this way the work process will be faster, more convenient and neater.

If you have certain skills, you can assemble a folding product.

To make a home-made piece of children's furniture look more interesting, you can apply a design to the back and seat. To do this you need to use safe paints. The color scheme should be bright and cheerful. Simple ornaments, floral patterns, and imitation of children's toys, such as cars, look great on wooden furniture.

Instead of natural solid wood, you can use chipboard or plywood, but these materials are not durable.

Due to the fact that the size of the product is small, a large pattern will become a kind of accent that attracts the child’s attention - he will like to sit on such a beautiful chair, play games or have breakfast.

You can use appliqués for decoration – there are plenty of adhesive bright films on sale.

The image will turn out smooth if you use a stencil pre-cut from paper or thick plastic.

You can use appliqués for decoration – there are plenty of adhesive bright films on sale. Whether the image will be monochromatic or multi-colored depends on your imagination.

First of all, these are wooden blocks and boards from which the frame, seat and back are assembled.

It is not recommended to use bulky (protruding) parts, both small and large, in finishing the seat or back of a children's chair. Firstly, it is inconvenient for the child, and secondly, they quickly fall off when frequent use products.

To create a chair you will need various materials.

VIDEO: DIY high chair

For large quantities modern materials, wood still does not lose its relevance. This is especially true for furniture for children. Of course, you can buy a children's wooden chair in a store, but they are often made of plywood and do not differ high quality. And children's wooden adjustable chairs made from good hardwood are very expensive. To give your child a durable, beautiful and comfortable high chair without spending a lot of money, you should make it yourself. There is a wide variety of models, but the article will discuss three main ones: regular high chair, transformable and high for feeding.

DIY wooden children's chair

Before you start manufacturing, you must remember that children's furniture must be safe for health. It should not have sharp corners, it should have perfect smooth surface, without gaps, cracks and gaps, and must also be strong and reliable.

The optimal height of the back of a children's high chair is 55 cm, the seat is 32 cm. You can attach the parts different ways: for self-tapping screws, nails, dowels (at least 2 pieces for each joint) or wooden tenons. Let's consider the last option.

To fasten the structure, strong hidden rectangular tenons are used, which are placed in the grooves with glue. For maximum reliability, the tenons, in addition to glue, are fixed in the grooves with through dowels with a diameter of 6 to 35 mm.

List of parts and materials

• Top crossbar(1) 1.9x4.1x16.5 cm - 1 pc.
• Back leg(2) 3x3x55 cm - 2 pcs.
• Carved crossbar(3) 1.4x4.1x16.5 cm - 1 pc.
• Middle crossbar (4) 1.4x2.9x16.5 cm - 1 pc.
• Boards for the seat (5) 1.4x10.5x26.3 cm - 2 pcs.
• Bottom crossbar(6) 1.4x2.9x16.5 cm - 1 pc.
• Side crossbar and drawer (7) 1.4x2.9x17.7 cm - 4 pcs.
• Front leg (8) 3x3x30.5 cm - 2 pcs.
• Front crossbar and drawer (9) 1.4x2.9x19.5 cm - 2 pcs.

For the rear and front legs, straight-layered pine bars with a cross-section of 3x3 cm are used. Starting from the seat upward, the rear legs should narrow to 1.9 cm. And the front legs - from the seat to the bottom to 2.4x2.4 cm.

Important! Only the outer edges can be planed. This is necessary so that the inner edges of all legs remain parallel to each other, which will ensure easy installation tsarg and crossbars.

The front edge of the top crossbar should be rounded, and the carved edge can have any pattern, but it is advisable to avoid sharp corners.

The middle crossbar is installed so that its lower edge is flush with the seat.

First of all, the back pair of legs is glued together, as well as all the crossbars. Next, a pair of front legs and a crossbar are connected, after which they are connected to each other by drawers and crossbars.

All gluing points are compressed with clamps, but with obligatory control of right angles. To do this, you can use a carpenter's square. At the very last resort seat planks are attached. Their reliability is especially important, therefore, after the glue has completely dried, they are further strengthened wooden dowels for which holes need to be drilled. The protruding ends are removed with a chisel.

Children's wooden transforming chair

Is a kit children's table and a high chair that can be transformed into different positions. This is a single desk for studying and a comfortable chair for feeding. It folds up quite compactly, which is especially important for small apartments.

Necessary parts for the high chair:

• legs 39 cm - 4 pcs.;
• rounded corners - 4 pcs.;
• upper crossbars 22 cm - 2 pcs.;
• crossbars 34 cm - 2 pcs.;
• diameter 30 cm - 3 pcs.;
• seat base 20x30 cm - 1 pc.

Details for the table:

• legs 50 cm - 4 pcs.;
• strips 41 cm - 4 pcs.;
• diameter 34 cm - 4 pcs.;
• table top 45x38 cm - 1 piece.

For legs, slats, crossbars and crossbars, it is best to use timber with a section of 2x4 cm, and for the tabletop and seat, plywood 1.8 cm thick is suitable. Rounded corners are cut from boards 2 cm thick. As mentioned above, the wood must be well dried and have no knots or cracks.

Making a chair frame

All parts will be attached to each other with glue, but to ensure higher strength, wooden dowels measuring 2x5 cm should also be used. They can be easily made with your own hands from plywood 8 mm thick.

For each dowel, a special groove is made at the connection points. First, using a drill (6 mm drill), the ends are drilled in the place where the dowel will be laid, and then the groove is directly selected with a chisel 8 mm thick. But before installing it, all connections must be coated with glue.

Thus, the side parts of the future chair are assembled, tightened with clamps (making sure that the angle is exactly 90 degrees) and left until the glue dries completely. Below is a drawing of a children's wooden chair.

After this, they must be sanded well until the surface is smooth.

Making the back and seat

The back and seat are made of 25x30 cm in size from 2-3 sheets of plywood glued together. It is advisable to round all corners. Foam rubber is glued to them and everything is covered with a fabric cover. Before installing them on the chair frame, they are fastened together with metal brackets.

Now let's start assembling the chair. First, two finished sidewalls are connected using planks. Fastening is carried out using the technology already described. The seat itself rests on slats, and to secure it you will need cylindrical dowels or screws. Then the lower strips and the back strip are installed on which the backrest will be mounted. After all work has been completed, the chair should be left to dry.

In addition to the main table, you can also make a small tabletop. It is especially convenient for feeding or playing with small children. To make it, you will need a plywood sheet, from which a tabletop of the required size is cut. It is attached to the armrests using glue and dowels. But it makes more sense to attach it with self-tapping screws; this will allow you to easily dismantle it if desired.

Making a table

The technology for assembling the table is absolutely identical to assembling the chair. Therefore, there is no need to describe it in detail; you just need to focus on the main stages. First, the side parts of the table are assembled and sanded, then they are connected by transverse strips and sanded again.

When the children's wooden transformable chair is ready, it is coated with several layers of varnish.

High children's wooden feeding chair

Making furniture with your own hands is a labor-intensive process. Nowadays it’s easier to buy ready-made or order it than to make it yourself. But there are times when a thing is needed a short time or there is no way to pay a lot of money for it. One option is a high chair for feeding your baby. The tip below will tell you how to make one from an old chair with your own hands.

Children's wooden chair assembly diagram

To make it you need the simplest chair with a backrest. It is very good if it has. It is important that it has crossbars between the legs and is strong and reliable. In the future, turning it over, the back will serve as the front legs of the future chair. Next, you will need strong wooden slats the size of the height of the chair; we fix them as shown in the figure. So, we get a back pair of legs, which are fastened together with a strap. To achieve maximum stability, the rear legs must be attached at an angle that is selected individually. Then all the legs are fastened together with horizontal strips.

The frame of the future chair is ready. You can make it more convenient to use by attaching smoothly sanded boards or a sheet of plywood as a seat. Placed on top of it soft seat. Small smooth boards are used for the back and table top.

That's all, the chair is ready.

It doesn’t matter how the children’s wooden highchair is assembled, the main thing is that it should be comfortable and safe for the child. So that the finished chair and table have an aesthetic appearance and last as long as possible, they are covered with a protective paint and varnish composition in several layers. Besides this, everything wooden parts can be decorated with bright designs, which are applied with a simple brush or sponge through a stencil.

It is optimal to use artificial leather for seat upholstery, because it is easy to clean. This is especially true for young children. It is desirable that the back of the chair also has soft upholstery made of waterproof fabric.

Before assembly, all wooden parts must be carefully sanded with sandpaper, first coarse-grained, then fine-grained, until a perfectly smooth surface is obtained.

If the chair is assembled with self-tapping screws, their caps are deepened and closed plastic plugs, matched to color.

In addition, you can get creative and make the chair colorful and interesting for a child, choosing a bright one upholstery fabric, and painting all wooden parts oil paint bright colors.

Or you can entrust the design to the future owner of the chair itself.

Children's wooden chairs photo

Many modern parents are trying to make a baby high chair with their own hands. Made at home it will suit everyone high demands and completely eliminate allergens and components harmful to the child. Moreover, if you consider high cost furniture for a child, this will be a good way to save money.

A person who knows how to work with wood can easily make a good, and most importantly safe, transformable chair with his own hands. Before assembling a high chair, you should carefully select the materials for it.

Experts advise using wood coniferous species, such as spruce or pine. They should be chosen because they are easy to process, last a long time and are relatively inexpensive. Still, professional carpenters are accustomed to assembling children's furniture from linden. It costs a little more, but will last much longer.

Since a children's highchair is being made, it is imperative to rid it of splinters and irregularities. Can be used for this sandpaper, but the work will go faster using a grinding machine. Comfort and safety are important for a child, so these points are the main ones in this work.

Prepare all the necessary tools in advance: nails, bolts, nuts, hinges, and finally take care of painting the finished product. The mobile high chair must be painted acrylic paint. It is less toxic, just like varnishes on acrylic base. The child will not only breathe harmful fumes every day, but also taste them, so parents should take care of his safety.

Types of chairs

There are DIY high chairs different types. Before starting work, you should decide on one option, this will allow you to more accurately determine the amount of the option spent. You also need to know from what age and until what age a child should eat in a place specially prepared for him.

Starting from six months, the baby is able to visit a high chair for feeding. The structure must be made in such a way that the child cannot fall from it. A high chair for feeding a child should have high legs so that the child sits at the same level as adults. Knowing how to choose a high chair will help your baby feel comfortable at every feeding.

High chair for feeding (option 1) High chair for feeding (option 2) High chair for feeding (option 3)
High chair for feeding (option 4) High chair for feeding (option 5) High chair for feeding (option 6)

The standard version of a high chair is a seat on long legs, to which is already attached small table. This option can be placed anywhere, and the child pollutes only a certain area allowed to him. A combined children's high chair is a small high chair, well installed on a table-desk. When the baby grows up, the wooden chair is removed and turned into a play desk.

Work process

Drawings, dimensions, diagrams - all this is available on the Internet. You can also find photos and videos of the work process there. After creating a schematic drawing, you can start cutting out the chair for the child:

1. Each piece of wood is processed with sandpaper before attaching them to each other.
2. The dimensions must correspond exactly to the drawings, otherwise the high chair will not stand level.
3. You need to connect from bottom to top in order to properly secure the seat.

We cut out the parts for the chair. It is advisable to use a router with copy cutter
The base to which the seat will be attached. The back and sides are ready.
The children's high chair is transformable, it can be folded and hidden. The children's high chair is ready

Before starting work, find out at what age you need a high chair. It should not be made too small or too large - this will cause inconvenience during feeding. All edges that come into contact with the child are made smooth and varnished in several layers.

In some cases, it is better to wrap the high chair with foam rubber. This will provide additional safety, and the rules say that you need to make a high chair high level. Experts advise sewing a cover for the high chair that can be washed more often, that is, kept clean. The main thing is not what kind of chair, but how comfortable it will be for the baby to sit in it.

Knowing how to choose the right model and how to assemble a highchair, you will provide your child with high-quality and safe furniture. These necessary interior items will come in handy in any case, but buying them in a store is not always safe. Yes and savings Money always has a positive effect on future parents. Instructions on how to make a highchair will help you understand all the details and achieve an amazing result that will surprise all your loved ones.

A small wooden stool will find a use in every home. Children run around with great joy in these chairs. Sitting on such a stool is convenient for peeling potatoes and performing other “sedentary” work. However, not many people decide to buy a small stool due to the fact that there is always a more important waste of financial resources. But almost everyone can make a small wooden chair with their own hands. To make it you will need a jigsaw and a little imagination.

Preparation.
Manufacturing of parts, grinding.

Painting.

Preparation.
Preparation of material and necessary tools plays important role and saves time in the future. To make a stool we will need:
- hewn board measuring 800x200x25 mm (dimensions are approximate, you can proceed from what is available),
- 8 shiny screws (50-60 mm),
- sandpaper,
- jigsaw,
- screwdriver or screwdriver,
- paint and varnish on wood,
- tape measure, pencil and corner.

You need to start by marking the board. First of all, using a corner, a pencil and a tape measure, we mark a rectangular section without knots, 32-33 cm long. This will be the upper part of our high chair. Next, we mark two segments of 23 cm each - these will be the sides. Now it is advisable to give them some kind of curly pattern. You can use any objects that have a circle for this, simply outlining them with a pencil. But, this method involves an irrational waste of time. After all, you will have to mark the center and other dimensions in each side. Therefore, for the sides it is better to use a pattern pre-cut from thick cardboard or other material. It will allow you to easily and quickly mark a large number of sides. Just attach the pattern and trace it with a pencil.

By the way, the use of a figured pattern on the side not only gives them beautiful view, but also allows you to trim off all unwanted knots.
And immediately mark the jumper. It should be trapezoidal in shape and have sides of 230 and 220 mm. The width of the jumper is not important - from 80 to 120 mm.

So, has a marked board.

Important! You should not draw too thick lines - this affects the evenness of the trim. And the pencil is not so easy to erase.

Using a jigsaw we cut out all our parts. Evenness is important here. To trim the cut evenly, it is better to guide the tool blade not along the line, but to the side of it.

You can learn to cut evenly using unnecessary waste. So, let's cut out all the details.

This will give the product not only a beautiful look, but will also hide all possible irregularities in the cutting.
Next, we carefully sand all these parts with fine sandpaper. It is most rational to carry out this procedure precisely at this stage, since when grinding finished design a number of inconveniences may arise. It is convenient to sand smooth surfaces by putting sandpaper on wooden block, on either manual machine for grouting putty. The main thing is quality, since after painting all defects will appear and be visible.
This is what sanded and unpolished sides look like.

So, it has the same parts, but ready for assembly.

It is advisable to carry out the assembly in this order:
- connect the sides with the jumper (1 screw on each side);
- place this structure on a flat surface and screw on the top cover (2 screws on each side);
- We strengthen the connection of the sides with the jumper (1 more screw each).

The chair is assembled! We check it again on a flat plane. If the stool is a little wobbly, then we tighten the legs until the product is completely stable.

Painting.
Before painting, we check the product again for defects, and if necessary, erase them and pencil residues. Using a brush, we clean the stool from wood dust and begin painting.
Here “there is no comrade to taste and color”! You can leave the natural color of the wood by painting it with clear varnish. You can give the product specific color using a variety of wood paints, which are abundant in all hardware stores. In principle, one coat is sufficient for painting. But, if, after the first layer has completely dried, the surfaces are lightly sanded again with fine sandpaper and a new layer of varnish is applied, the shine of the product will noticeably increase.
Important! Poorly sanded ends absorb more paint and become darker.

This is what the finished chair looks like, varnished.

The difficulties in caring for children are largely due to the fact that buying everything necessary can be quite a task for the family budget. Another question is whether parents manage to find exactly what they would like in stores, or whether there is actually nothing ideal among the assortment. Both reasons that prevent you from purchasing this or that product, one way or another suggest the idea that it would be nice to make it yourself. For example, a highchair - if dad has sufficient experience working with various instruments, he can easily make it with his own hands.

Peculiarities

Contrary to its apparent simplicity, a do-it-yourself highchair is not so simple task to complete it without any preparation. Do not start work until you have a clear understanding of what the end result should look like and what operations will need to be performed to achieve it.

Also, don't ignore calculations. Any chair must be strong enough to support its “passenger”, and a child, although not heavy, will not sit neatly on it, especially since the dimensions of such furniture are also small.

Strength requirements are relevant not only for basic materials, but also for fasteners, be they self-tapping screws, glue or grooves. In addition, the baby is constantly growing, and it makes sense to make a high chair with a reserve for at least a couple of years in advance. For all its strength, the product should be comfortable, that is, approximately correspond to the dimensions of the owner.

Also try to ensure the proper lightness of the furniture being manufactured - it should be convenient for the owner to independently move his chair to where he wants to sit at the moment.

Don't forget to stay safe. Furniture, in any case, cannot be traumatic, and children's furniture - even more so. The presence of any sharp edges is not allowed, and if the main material is wood, as happens in most cases, then it must be carefully sanded to prevent splinters from peeling off. Covering ready product varnish or paint, give preference to natural ones - children tend to put everything in their mouths and can be poisoned by the toxic coating.

Finally, remember that this chair is for a child. In addition to suitable sizes, it is desirable for a piece of furniture to also be beautiful. If complex decor is not a task for you, at least try to paint it in bright colors.

Drawings, dimensions, diagrams

Before proceeding directly to the manufacture of parts, it is necessary to draw up a drawing with dimensions - this is the only way that all components will ideally fit one another. You can use one of those ready-made options that are already posted on the World Wide Web, or draw up a diagram yourself. It is important to note here that there are drawings and instructions on the Internet that explain how to make a table and chair standard view, so they are usually not suitable for those who want to create something original - for example, an elephant chair.

• Drawing the table and chairs, which can be made in the form of a kit, do not have to strictly follow the principles of drawing: they do not have so many details that they cannot be kept in mind. The main thing for us is to make sure that all dimensions match and the parts fit perfectly together, but the methods of joining individual parts must be present in the drawing. In general, it can be presented schematically, without high precision of the drawing.

• Think over the dimensions (or choose ready-made drawings based on them), starting from the comfort of the child. Chairs whose seat is at knee level or slightly below are considered comfortable. In the case of a highchair, it is recommended to make the seat a little higher, because the child will probably still grow. At the same time, do not overdo it: if it is difficult for the baby to climb onto the seat, then the product can be considered a failure.

• Determining the size of the seat itself, keep in mind that the owner should fit comfortably on it, but do not make it too large - this will make the chair heavier and difficult to carry. The normal height of the backrest is approximately two-thirds or three-quarters of the owner's back; making it higher than the neck is no longer practical. When determining the thickness of future parts, rely only on the strength of the selected material and the weight of the child.

Materials

In terms of ease of processing and environmental friendliness, among materials for the manufacture of children's furniture, wood and its derivatives undoubtedly hold the palm. Therefore, you can most often find a wooden high chair. However, you cannot choose just any tree - this is also worth thinking about before starting to make it. The most popular among all types of wood is beech. It has the strength of oak, but it is easier to process and costs less. Actually exactly hardwoods are considered priority. From inexpensive options Birch is often chosen; linden may also be considered.

Spruce and pine are suitable for making furniture from coniferous wood, but the resin contained in any such wood is dangerous - it can stain clothes, and it can also pose a health hazard. Regardless of the specific species, choose a uniform tree, without knots or cracks, with an even texture.

The seat material may be similar to the body material, or it may be fundamentally different. In order to save money and achieve greater flexibility, the seat is also made of plywood, and even chipboard. When choosing them, give preference only to the most durable types, but remember that in any case they are inferior in durability to solid natural wood.

For increased softness, the seat can be additionally equipped with a small foam cushion covered with a fabric that is pleasant to the touch.

There is also a seating option made from plastic bottles - both whole and cut. Harmful plastic, present as garbage in any apartment and polluting environment, could get a second life, especially since its strength and durability are very high. This option is still much less common due to the difficulty of securely fastening individual parts, as well as the not very attractive appearance of the finished product.

Colors and decor

For all its practicality and convenience, the baby will definitely not like the chair if it cannot be described with the word “beautiful”. Nobody makes any special chairs for teenagers, but for children younger age Brightness and attractiveness are very important. Therefore, do not limit yourself to just clear varnish or discreet monochromatic solutions. A monochromatic color is generally acceptable only if a light or very bright shade– often these are red or yellow, the so-called “warm” tones.

If drawing is not alien to you, please your child with interesting design solutions. You can go the “adult” route by painting the frame one color, and the seat and back in another, or you can focus on the child’s desire for something bright and defiant. The simplest option is “rings” on the legs of the chair; any patterns and even just blots are also acceptable, provided that it looks cute and positive. Regardless of how much and what kind of paint you used, do not forget - it should not be toxic.

If you have a creative streak and a desire to complicate the task a little for the overall benefit of the matter, you can create more complex decor. Another option is to decorate the legs or back of the chair with carvings, but adults would like this solution more. But for a child, a chic solution would be decoration in the form of one or another animal. Classic version– when the back is cut out to resemble an elephant, or any other animal that a child likes, and then painted to look more like a “cartoon” character.

Covers can also become a unique type of decoration. In addition to their typical functions, such as simplifying the cleaning of furniture and increasing the comfort of its use, they can also decorate the back of the chair. Ideally, they should depict the child’s favorite hero, characters from popular fairy tales, or the same animals. Mom can help dad make a cover, especially if she knows how to embroider or has fabric appliqué skills. If your mother does not have such talents, you can simply alter the cover from clothes on which the necessary pictures were applied at the factory.

For the youngest children

Children of the youngest age still sit on a high chair for only one single activity - eating food. Teaching a child to eat while sitting, and to sit in general, particularly at the table, is important and necessary. However, the peculiarities of its development at this stage do not allow the use of ordinary chairs for this. The problem lies in the fact that a simple chair does not have a back with arms, and a tiny child himself will not yet be able to sit on it straightly and will simply fall.

As for children's high chairs, their sizes usually do not allow you to choose a normal table for them. In this situation, a special high chair would be an excellent solution.

Such furniture should be comfortable for both the child and his mother - for now the child cannot eat on his own, so the mother will have to feed him with a spoon. For the convenience of this operation, the chair is made at a normal height, or even a little higher - so that the mother does not bend over. The actual lifespan of such a chair is about a year, so if you have one child and the family is not planning a second one at all, you can choose not the most durable materials for manufacturing.

In terms of manufacturing, a high chair is perhaps the most complex - it greatest number details. The relatively small seat is raised high above the floor, which forces the installation of additional stiffening ribs between the legs for improved stability of the structure.

Taking into account the specifics of a child of the appropriate age, both the backrest and railings are simply necessary - they must completely exclude the possibility of the baby falling. Moreover, there should be a barrier in front, although it also has another useful function - it plays the role of a countertop on which food will be placed. The space under the tabletop is left free - the baby will stick his feet there.

Cutting and assembling such a chair is quite simple. First, two identical side halves are cut out according to the drawing, which are then connected to each other by the seat, back and stiffeners using grooves, glue or self-tapping screws. Before assembly, all individual parts should be sanded to a perfectly smooth state, the finished product is varnished or painted - ready.

Models for older children

The peculiarity of high chairs for children who have finally left infancy lies in the significant variety of design options, limited only by the imagination of the creator. The backrest is still considered a mandatory attribute, but the railing is no longer there, as are the front barriers. There is no point in saving on materials in this situation - if the furniture is made with a margin of size, then the child will be able to use his high chair for many years.

The manufacturing process consists of a few simple steps:

• Think through the design down to the smallest detail and draw up a drawing. Decide on the number of parts of the body - will it simply consist of two solid halves or of separate legs and separate supports for the seat, will the backrest base be a continuation of the rear legs or will it be attached separately, and so on. Calculate everything, including the thickness of the seat and legs, provide stiffening ribs and additional supports for the seat in advance. Provide grooves and mark places for screws.
• If doubts about the correctness of the selected parameters still remain, try to assemble a temporary chair from cardboard according to the drawing. Unfortunately, it does not have the same strength to test the product from all sides, and it differs in thickness from wood or plywood, which also needs to be taken into account when specifying the dimensions, but you will get a visual idea of ​​the future product.

• Start cutting out individual parts from wood or plywood. It is recommended to start with the body. It’s good if there are a lot of identical parts in the set - then the subsequent ones can be cut out by simply tracing the finished first one. If the design allows, do not delay assembly until you have cut everything out - start as soon as you have at least two parts that need to be connected. This will help you immediately notice any design flaws, if any. Once the pieces are ready, sand them smooth.
• When all the elements are ready, proceed to the final assembly. Do not limit yourself to one type of fastener; in particular, glue the grooves - this will significantly strengthen the product and increase its durability. Ensure that the grooves fit as deep as possible - tap the joints with a hammer to make the fastening more secure.
• Last step– varnishing and painting.

No matter how detailed and intelligible the theoretical explanation is, it is unlikely to compare in terms of information content with a clear example, because it’s better to see once than to hear a hundred times.

N and the video is one of best examples how to make a highchair with your own hands. The master talks about literally everything, including the dimensions of the parts he used, so you can even do without a drawing, simply repeating what he says. The resulting chair is quite simple in design, but easy to make. You can find many other similar videos on the Internet, but the models there are always approximately the same, but here the process is shown in great detail and clearly.

Watch a master class on making a highchair with your own hands:

The principle of making a children's high chair is generally similar, but it is worth studying in more detail both because of the increased complexity of the design, and simply because it is being told by another master who can reveal some new points.

How to make a baby high chair, watch the video:

Return