DIY metal workbench: drawings. How to make a comfortable workbench in the garage with your own hands How to make a workbench table in the garage

Everyone needs a garage first and foremost to store their car. However, experienced, competent drivers use the technical inspection room, repair work, machine maintenance. And they know how to not only fill in oil, but even do some rather complex work from a technical point of view, repairing their favorite car. As a result, the garage turns from simple storage into a real workshop. And here you should already have all the equipment necessary for the work. In this case, a workbench in the garage is simply necessary.

Why is a workbench so useful, what is it? The fact is that a workbench is a special desktop with many functions. It allows you to effectively carry out electromechanical, installation and plumbing work in convenient conditions. This table is perfect for processing all kinds of materials. At the same time, everyone, if they approach the task responsibly, will be able to make a reliable workbench for the garage with their own hands.

Let's take a closer look at the workbench. It is often compared to a desk. It maximizes human capabilities because it provides an excellent opportunity to effectively use a durable surface for work. At the same time, there is also a sufficient number of sections for storing necessary items, tools and parts. It is this kind of real workbench, complemented by numerous shelves and drawers, that is most effective and convenient for working in the garage.

Let's list the main structural elements workbench.

The frame with legs is a load-bearing base. It is this that becomes the base on which all the steel parts are already fixed.
The countertop should be powerful, thick and durable. She will have to withstand severe mechanical loads, such as hammer blows. It is customary to make a tabletop from a thick wooden board or metal.
Nightstands are usually located at the edges. It’s great when there are a lot of drawers and shelves. In such sections it is convenient to store the necessary parts, compact spare parts, and small tools.
An additional shelf usually takes up space directly under the countertop. It is most logical to place there those objects, tools, parts that are most often used directly while working on the workbench. It will be very convenient to take them: everything you need will be in the free access area.

pay attention to important point. When you put a table in the garage, you need to take care of the light level. Consider alternative lighting in advance working area. For example, you can use different types lighting fixtures. Install an additional light source on the ceiling, and attach a rotating lamp with a directed beam of light to the wall or table. For more efficient work, as well as compliance with safety regulations, good lighting is necessary.

Types of workbenches

Before installing a specific workbench in the garage, it is worth understanding what types of such workbenches there are. It is customary to divide workbenches into metalworking and working ones.

The carpentry workbench has a wooden tabletop. The frame can be made of wood or metal. Of course, a wooden tabletop, no matter how thick it is, is still very vulnerable. It is inconvenient to work on such a workbench with metal parts. The surface of a wooden tabletop is damaged by metal shavings, and it is difficult to remove numerous traces of machine oil from it. Unfortunately, the service life of such workbenches is short.

A mechanic's workbench in the garage is more suitable. It attracts with its reliability, durability, increased wear resistance and versatility. Main secret– durable metal tabletop. You can comfortably work on it with parts made of any materials, in particular metal. They grind and cut, sharpen and saw on metalwork benches. The advantage of a workbench is also its stability, because when working with metal parts, a lot of pressure is sometimes placed on the tabletop. It is better to store tools on shelves and drawers of a workbench.

Materials: wood and metal competition

Do you want to make a workbench for your garage yourself? Then you will need to choose the main material: such tables are made of metal and wood. As a result ready-made designs differ in the level of reliability and stability. Undoubtedly, metal workbench more functional, stable, durable.

Let's pay attention to the main features of workbenches made of different materials.

In the process of making a workbench, it is easier to work, of course, with wood. It is enough to stock up on a hammer, jigsaws, screwdrivers and a grinder or hacksaw to quickly make wooden workbench.
It is much more difficult to make a metal work table, since you need to be able to process metal, as well as carry out welding work. Working with iron blanks is quite difficult. It is advisable to have at least minimal skills. In addition, special equipment will be required.
When experts compare metal and wooden workbenches, they note: wooden table less durable, but metal is too heavy and not so convenient to use.
The optimal solution is combined workbenches. You can make a wooden tabletop, and then additionally cover it with a metal layer. And then you can safely work with metal and use a vice.

Do you want to have your own workbench in the garage, want to make it yourself, but don't intend to use it very often? Then it will be for you the best option traditional wooden desk. Just make the tabletop thicker and more reliable. It is very important to ensure resistance to mechanical stress.

Preparatory process

Let's learn how to make a workbench in the garage with your own hands. First you need to prepare for work. First of all, determine optimal design, size and shape of your future workbench. Let's say that sometimes the best option is to place a workbench in the corner of the garage. This will allow you to rationally use the space and create a comfortable work area.

Choosing a place to install a workbench is one of the most important tasks. Great importance has the level of illumination here. Think about what it will be like daylight. The best option– when the light falls directly or from the left side. When it comes to artificial lighting, everything needs to be organized correctly. It is advisable to make an overhead light, as well as install an additional source of directional lighting for the work area.
The productivity of work on a workbench and the level of comfort largely depend on the height of the tabletop. It is necessary to calculate the optimal height in advance. Just stand straight and bend your elbows. Imagine that you are leaning on a workbench. This is exactly the distance between your hands and the floor optimal height workbench.
There is no need to make the width too large. It’s great if a person can freely reach the opposite edge of the tabletop. Good size– 50 cm wide. The length can be made much longer. How longer table, the more parts and large tools can be laid out on it.

A good solution is to equip a workbench the right tools. For example, they attach a jigsaw or a circular saw to the tabletop.

We select tools and materials

Let’s immediately clarify the list of materials and tools. To work you need a drill and welding machine, tape measure and level, grinder with electric jigsaw. Be sure to stock up on the following materials.

Steel strip and angle. The thickness should be 4 mm.
Anchor bolts, screws and self-tapping screws.
Square pipe with a thickness of 2 mm.
Steel sheet to make drawer holders and a tabletop. Optimal thickness– 2 mm.
Need drawer guides.
For the tabletop you need to take a massive one wooden board with a thickness of 50 mm.
The walls of the drawers and tables are made of plywood with a thickness of 15 mm.
To decorate and improve performance properties, you also need paint for wood and metal.

If you make a workbench from these materials, it will be very strong, durable and stable, easy to use.

We assemble a workbench for the garage with our own hands

Let's look at the algorithm for making a workbench for a garage.

First take four supports. They are made from angle steel. The legs are fastened at the top by welding.
Stiffening ribs are needed. At a distance of 12-15 cm from the floor level, small fragments of the corner should be welded.
To secure drawers and shelves, additional racks are welded.
Then it’s time to make the countertop. You can take oak boards. They must be tightly secured to the frame. The best option is to make holes for bolts around the perimeter of the frame in advance.
The boards also need to be drilled. The bolts should fit well into the holes.
Already secured the lid? Now it's time to sheathe it with metal. It is advisable to use galvanized iron. It is fixed with self-tapping screws.
File the edges of the metal.
Make shelves and table tops separately.
Assemble the entire workbench completely.
On final stage needs to be processed wooden elements special compounds to prevent the formation of fungus and mold, as well as fire retardants. You can further decorate your desktop using .

When you want the workbench to stand as securely as possible, you can attach it to the floor by welding metal corners to the legs.

If you approach the task as responsibly as possible, follow the technology and use useful tips, your workbench will be in no way inferior to ready-made workbenches from the store.

Video: learning the process of making a workbench for the garage

Do you want to see everything clearly? key points, algorithm of work in the manufacture of workbenches for the garage? Now you have a great opportunity see all the useful information in the video.

Here you will simply feel like a direct participant in the events! It will be possible to evaluate the complexity and order of work. The videos focus on all the most significant nuances. After watching, if you take the matter responsibly, you will be able to install such a functional desktop in the garage with your own hands.

Good luck to you! Have a reliable, efficient workbench in your garage. With him, work will turn into pleasure.

In many cases, the garage becomes the only place where you can repair or overhaul any part of the car, make the necessary equipment, or simply relax your soul by working with your hands at a mechanic or carpentry workbench. In some cases, you can even organize a small metalwork or carpentry workshop in the garage, if you have the desire and time. In any case, a workbench is needed in the garage like air. Serious craftsmen always have two of them - for working with metal and a wooden workbench, not counting the work table and the machine.

How to organize a workbench in the garage

There are few options for getting a workbench in the garage; most often, the desired equipment can be purchased in one of the following ways:

Buy Chinese or domestic products;
Draw up drawings taking into account the required dimensions and order the manufacture of a workbench from familiar carpenters or mechanics;
Make a workbench for the garage with your own hands.

It cannot be said that with the current abundance different instruments and equipment for the garage today it is impossible to buy a high-quality workbench. Moreover, even among domestic producers There are many decent-looking models that would be quite suitable for work in the garage, but there is one condition.

Important! The standard size and design of a workbench does not always suit your individual height and arm span. In addition, not in all cases it is possible to squeeze a workbench designed for the scale of a locksmith workshop into the space of your garage.

It makes sense to order the production of a workbench according to your drawings if it is not physically possible to make it for the garage with your own hands, for example, the room is not ready, or you do not have the necessary skills to work with welding or carpentry tools.

It is very important from the very beginning to correctly formulate the design requirements and decide where and how the workbench should be located in the garage:

The height of the table and the dimensions of the top cover or table top should be as convenient as possible for your individual data. At the same time, there should be free space around the tool in the garage of at least an arm’s length from the working position at the table;
Despite the fact that 99% of the work is done in a standing position, there should be a chair and a wooden grate near the workbench if the garage floor is concrete. However, the entire set of accessories must not interfere with or in any way affect the car or other vehicle stored indoors.

Advice! If you plan to drill, cut or plan wood a lot, get a vacuum cleaner, a good exhaust ventilation and a car cover.

How to make a workbench in the garage

Your first experience in building garage equipment may be a simple wooden workbench or wooden workbench. The design of a table made of timber is more affordable to manufacture; working with a saw, jigsaw and drill is much simpler than cutting and welding a steel angle, from which professional-quality plumbing tools are usually made.

Building a wooden workbench for assembly work

To build a workbench, we will need:

Wooden beam, preferably oak or pine, approximately 12-15 m, the cross-section of the material is selected individually, based on the expected load on the workbench;
Planed edged board, 20-30 mm thick, smooth, without knots or surface defects;
Sheet plywood, 6-8 mm thick, three sheets 200x60 cm;
A set of wood screws and steel angles, shelf size 50 mm and length from 50 to 70 mm, at least 40 pieces.

Advice! All cutting work must be performed using manual or stationary circular saw, trim the edges of timber or boards only with a jigsaw or similar power tool.

In this case, even in the absence of carpentry skills, the cut turns out smooth, and accordingly, the entire structure of the workbench will look like a factory one.

At the first stage, we make the frame of the workbench, while taking into account the dimensions of the space in the garage. To do this, you will need to cut four vertical posts, four horizontal beams and five horizontal short cross braces from the timber. If the dimensions of a wooden workbench for a garage do not exceed two meters, you can use a beam with a section of 70x70 mm.

We cut off four vertical posts - two 90 cm high, two 150 cm high. The latter are made 60 cm higher; after the workbench is assembled, a plywood screen will be installed on them for the tools stored in the garage.

The horizontal beams are also different sizes. To bandage the support posts of the frame in the lower part of the workbench, we cut two sections of timber 150 cm long; to attach the table top, 200 cm long sections are needed. The last of the remaining material is cut into transverse struts 60 cm long.

We assemble the entire structure using steel angles and self-tapping screws, as shown in the diagram.

We assemble the tabletop by gluing together sheets of plywood and boards. After leveling and adjusting the dimensions, the boards and plywood, coated with PVA-M or wood glue, are assembled in clamps until they dry completely and gain strength. We sew the tabletop along the contour with self-tapping screws.

Lay the tabletop on finished frame and fasten it using self-tapping screws, after which the surface is carefully sanded with an emery attachment for an electric drill. Lastly, we install the screen and cover the entire structure with varnish so that in damp weather in the garage the wood of the workbench does not “sink.”

In appearance, the workbench for the garage turned out to be quite delicate, but in reality its strength is enough to withstand a load of more than one hundred kilograms. To increase rigidity, the rear pillars can be fixed anchorage to the walls of the garage.

Option for a metal workbench made from a steel angle

To make the structure we use a steel angle with a shelf width of 50 mm. Below is the sequence of operations for making a workbench in the garage with your own hands. Most of the work is done in the garage with a grinder and a welding machine, so before starting work you should practice and choose the best welding mode for metal 3 mm thick.

First, we cut a blank for making a frame for the top plate of the workbench. Work surface for workbenches locksmith type best manufactured as a one-piece or welded structure from steel sheet, plates or slabs. The recommended sheet thickness for a garage workbench is at least five millimeters.

After adjusting the dimensions of the slab, we place the corner blanks on its surface, from which we will weld the base of the tabletop. We carefully adjust the cut pieces to corner connections, install it on a flat surface, secure it with a clamp, weld it and thoroughly clean the seams.

This is the hardest part welding work. If you have it in your garage semi-automatic welding, the blanks for the base frame are first welded together using conventional welding, and then point-fixed to the steel sheet. Performing such an operation with conventional welding is quite difficult; you can burn or overheat the sheet, resulting in a “flapping” wave instead of a flat surface.

We cut off the “legs” for the workbench from the same corner and weld them to the base. If the workbench will stand on the ground or gravel surface of the garage, you will need to add special spots to the supporting part of the legs. If the structure needs to be fixed to concrete floor garage, drill holes in the spots for anchor bolts.

Next, we cut out horizontal cross ties, which we weld at the bottom of the workbench legs. This makes the structure rigid and stable on any garage floor. If necessary, an additional diagonal brace can be welded to the rear of the frame.

To install boxes for spare parts and parts stored in the garage, we additionally weld horizontal guides under the tabletop. So that the drawers can slide out freely, we weld a pair of short longitudinal corners onto the transverse sections. The boxes can be made separately or adapted from existing ones in the garage. In this case, the location of the guide angles must be selected individually.

In addition, the corner guides will need to be carefully sanded, or plastic strips sewn on, so that the bottom of the drawers does not “plane” and is not damaged when moving. Otherwise, within a couple of weeks after installing the workbench in the garage, the required force to pull out the drawers will increase several times.

After completing the assembly work, everything welds You will need to thoroughly clean it and treat it with a phosphate primer, after which the metal surface is primed and painted in the color favored by machine builders - blue or green. Which color is suitable for your garage is up to you. Working surface steel tabletop sheet is not painted, in best case scenario polished or treated with an acid etchant.

Conclusion

Making a workbench for your garage is a relatively simple and inexpensive process. The steel frame can withstand a load of several hundred kilograms, for example, from a car suspension or engine. Even if you purchase all the components and materials, the manufacturing cost will be an order of magnitude less than the purchased option. Moreover, in most cases, real car enthusiasts and repair and DIY experts do just that.

A good workbench in the garage allows you to make different kinds metal and wood work in a short period of time. Stored here various instruments and small details. In simple terms, it is a special table on which you can do turning and metalwork.

In addition to the tabletop, there may be multilayer structures shelves and hanging containers for storing nails, screws and nuts.

Do universal workbench simple enough. The main thing in this matter is to prepare a project and detailed drawings of the future product. During the creation process, it is necessary to observe the order of each action.

Self-manufacturing of such a structure will save a decent amount. Besides, individual project helps you make a design based on the parameters of your room.

Types of workbench

There are several types of workbench. Each of them has some characteristics. In turn, they are divided into:

Locksmith. It is intended for metal work. The tabletop of this product is made of a high-strength metal alloy. This is necessary for safety. While working on iron, sparks may be present.

In addition, the use lubricants may leave marks on wooden surface. The iron base does not require special care.

Carpentry. Its surface is made of solid wood. A carpenter's workbench is used for woodworking. These products do not have high strength and versatility, unlike metalwork.

The universal table has a metal and wooden tabletop in its design. The drawing of the workbench shows the structure of the carpentry work area.

What is included in the design of the workbench?

If the product is made independently, then it is important to think through every little detail. Additional shelves and spacious hanging containers will help you use this product efficiently. The standard model contains many drawers for storing large tools.

A homemade table can have both metal and wooden system storage An additional metal shield allows you to store small hanging tools here. Now the hacksaws and hammers will be located in one place.

How to make a workbench with your own hands?

We present to your attention detailed instructions how to make a workbench. Manufacturing carpenter's table takes place in several stages. First of all, you need to prepare all the tools and materials.

For this you will need:

hacksaw;
a screwdriver or a set of screwdrivers of different diameters;
carpenter's square;
level;
bolts;
nuts;
self-tapping screws;
detailed drawing of the product;
wrench.

From the materials you need to prepare:

bars for support. The size of each element should be 110 x 110 mm. During the selection process, you need to pay attention Special attention condition of the wood. There should be no cracks or knots here;
plywood sheets 30 mm thick;
boards for the frame.

When all the necessary items are prepared, you can proceed to the work process. It includes the following steps:

The initial step will be to construct a lower frame in which the tools and bench will be located. To do this, the boards are sawn off to the required level. Next, they are connected to each other using self-tapping screws. The end result should be a rectangular shape.

A spacer bar is installed in the middle. In the future it will reduce resistance finished product During the work process you will need a small wooden board.

The supporting legs of the table are fixed with bolts. To do this, in the plane of the frame they make through holes. For reliability, it is recommended to make 6 to 8 legs around the entire perimeter.

To give rigidity to the product, it is necessary to make a bottom shelf. At the bottom of each leg, 25 cm are marked. Then long ones are attached here wooden planks. In the future, a chipboard panel will be fixed on their surface. It will act as a base.

When the main part of the frame is completed, begin installing the top tabletop. You will need a hacksaw here. She removes excess parts of the board.

Protect the surface wooden table top hardboard will help. This durable material, which is intended for the work area.

You can increase the storage system using an additional metal shield, which is attached to the back of the carpentry table. IN support boards make through holes. After this, the metal base is secured with bolts. The photo of the do-it-yourself workbench shows the sequence of each action.

Photos of DIY workbenches

The functions of a garage often go beyond the banal parking of a car. At the same time it serves as a workshop. Repair or creative work requires a place equipped with tools and equipment. Let's look at how to make a workbench in the garage in a similar way.

Types of workbenches

The workbench vaguely resembles a desk, only larger. All structures are divided into two types - metalwork and carpentry. The main difference is in the material used to make the countertop. If it is wooden, the workbench in the garage belongs to the carpentry structure, metal surface automatically moves it to the plumbing equipment group.

The wooden surface of the workbench is not intended for working with metal parts. Chips or sharp edges of objects will regularly scratch the wood, and machine oil will leave stains that cannot be removed. As a result, the tabletop carpentry workbench will quickly become unusable.

It is much more practical to make a metalwork structure in the garage, which is considered universal and suitable for all types of work. On it you can:

to nag;
sharpen;
cut;
grind.

The metal workbench frame is more durable and convenient when working with heavy objects. The design is more stable and will not sag under strong pressure on the tabletop. If the garage serves as the main place for spending time and there is enough free space, you can make two structures for work - metalwork and carpentry.

Comment! In the immediate vicinity of the workbench in the garage, shelves are usually equipped where numerous tools and other devices for repairs or favorite creative activities are stored.

Design options

The functionality of a garage workbench depends on its design. For convenience, it is equipped additional elements. Depending on the type of occupation, workplace in the garage includes:

Frame with legs. Serves as a supporting element on which the remaining parts are supported.
Tabletop. The surface chosen is powerful, capable of withstanding hammer blows and the weight of placed objects. Can be made from a thick board or sheet metal, the combined design is relevant.
Nightstand. Equip one or two compartments along the edges of the workbench. Internal filling may consist of shelves and drawers designed to store small tools in the garage.
Additional shelf. Located on the wall in front of the workbench, its function is also to store available tools.

Comment! High-quality lighting of the workplace is an indispensable condition when setting up a workbench in the garage.

For work, it is better to choose a table or wall lamp with the ability to adjust the direction of light. There must be an outlet near the desktop, which is designed not only to provide lighting, but also to operate all power tools.

The idea of making a folding workbench in the garage with your own hands is not very practical. primary goal folding design on two legs - to save free space in the garage. In this case, the tabletop will be attached to the wall and will be in a raised state when it is not needed. But the essence of a workbench is a well-equipped workplace, when everything you need is at hand. And with a folding tabletop, the space under it should be free; there can be no talk of any bedside tables or shelves. This option is acceptable for garage owners who have limited space and who rarely need a workbench.

Wood or metal, which is better?

There are several options for manufacturing a desktop regarding the choice of material:

completely wooden model;
the previous copy is supplemented from above metal sheet;
the wooden frame is covered with a metal tabletop;
The desktop is completely made of metal.

Each method has its own weaknesses and strengths. Let's look at the characteristics of individual models, and the garage owner will decide for himself which option is best for him:

It is difficult to make a metal table with your own hands. Availability of a welding machine and experience in welding work is required.
Metal construction is the most durable and durable, and has greater stability.
Making a wooden table is somewhat easier; a jigsaw and a grinder are the main assistants. If they are absent, an ordinary hand hacksaw will save the situation.
A carpenter's table is less practical when working with metal. Its service life is shorter.

As a conclusion - combine wooden structure with a metal sheet that will cope perfectly with protective function table surface.

Preparatory process

After determining the material of manufacture and the installation location, they proceed to drawing up a drawing of the workbench, which will become the basis for arranging a functional workplace in the garage. To begin with, determine the dimensions:

Length. Depends on the occupation of the garage owner and free space. Average values vary within 2 m.
Width. If the workbench will be located near the wall, it is important to provide easy access to the tools on the shelf. Therefore, it is impractical to make the workbench wider than 0.6 m so that the hand can reach the necessary objects. Placing it in the center of the garage allows you to make the width larger if necessary.
Height. The meaning is strictly individual. Depends on the height of the master and the position in which he is used to working. Standard height a table of 0.8 m is not enough for working in a standing position; your back will get tired quickly. Owners of workbenches often increase the height of the structure to 1 m.

A pose with your elbows bent will help you navigate the height of your work table in the garage. Mentally leaning on the future workbench, measure the distance between the floor and elbows.

Advice! In case the design is designed for a standing position, and sometimes you have to sit, stock up on a comfortable wooden stand, on which you can place a chair. A low wooden rack will be needed in cold weather to prevent your feet from freezing from the concrete floor of the garage.

One side of the workbench is intended for installing an electrical cutting tool. For ease of fixing a jigsaw or circular saw, the edge of the tabletop should protrude beyond the frame by 0.2-0.3 m.

The set of materials and tools for making a workbench for the garage with your own hands depends on the chosen design. It is optimal to choose a sheet for the tabletop from stainless steel with a thickness of 1.5-2.0 mm. If this seems expensive for the garage owner, you can get by with 1.5 mm steel.

Making a wooden workbench

If you lack experience, it is better to choose a model of a wooden workbench for your garage to make with your own hands. Making a structure from timber using a drill and a jigsaw is much easier than welding a steel corner.

To assemble a wooden workbench for the garage you will need:

Wooden beam. Pine and oak blanks are particularly durable. Depending on the design of the workbench, a length of 15 m should be sufficient. The cross section depends on the planned loads.
Edged board for workbench table top. Select specimens 2-3 cm thick, without surface defects and knots.
An additional shelf is often placed between the desktop cabinets in the garage. Sheet plywood with a thickness of 6-8 mm is suitable. It is better to take 3 sheets of 0.6x2 m.
Self-tapping screws for woodworking and steel angles for assembly individual elements workbench.

To obtain straight lines workpieces after cutting, use a stationary circular saw, or in extreme cases turn to a manual analogue. The edges of the boards or timber are cut with a jigsaw.

First you need to make a frame for a desktop in the garage, taking into account the dimensions included in the drawing. The timber is cut into pieces, it should look like this:

4 leg stands;
4 beams that will be located horizontally;
5 cross braces.

If the length of the workbench in the garage is no more than 2 m, a beam with edges of 7 cm is suitable for work. As a result of cutting vertical racks You should get 2 blanks of 0.9 m each and 2 parts of 1.5 m each, which will be located near the wall of the garage. The difference of 0.6 m is intended for further fixation to the plywood screen supports for tool storage.

Horizontal beams connect the legs of a workbench in a garage. For fastening the support posts in the lower part, the length is 1.5 m. The tabletop is fixed with a beam 2.0 m long (according to the size of the workbench indicated in the drawing). Spacers 0.6 m long are prepared from the remaining timber. All parts are connected with steel angles and self-tapping screws.

When the frame of the desktop for the garage is ready, we begin to design the tabletop. For a carpentry-type workbench, it is assembled from boards and plywood sheets. The aligned and adjusted canvas is coated with wood glue, the two workpieces are clamped with clamps and held until the glue is completely dry and the canvas gains strength. Finally, the tabletop is fixed along the contour with self-tapping screws.

The wooden canvas is connected to the workbench frame with self-tapping screws, the surface is sanded using an electric drill equipped with an emery attachment. At the final stage, the screen is mounted and the structure is varnished. High humidity in the garage - an everyday occurrence, protective film varnish will prevent deformation of the wooden structure.

Comment! Fixing the rear pillars to the garage walls using anchor bolts will help add additional rigidity to the desktop.

Design of a steel angle structure

The design of a metal structure in a garage is done using a steel corner. The main assistants are a welding machine and a grinder.

Main process steps:

The corner guides need careful sanding or plastic strips. Such protection measures will prevent damage to the workbench drawers in the garage. Otherwise, after a short period of time, simple extension actions will require significant effort.

At the end of the work, the welds are thoroughly cleaned and coated with a phosphate primer. Then metal structure the workbench in the garage is primed and painted. The working surface of the tabletop does not need to be painted; if desired, it can be treated with an acid stain or polished.

Conclusion

Make it into the garage convenient workbench- the task is feasible. Even if you purchase all the materials, its final cost will cost significantly less than installing a finished copy. The undeniable advantage of a DIY design is the ability to choose the optimal dimensions in accordance with the size of the garage and your own height.

Initially the workbench was used exclusively when processing wood, and its main task was to secure the workpiece for support when using tools. To do this, they cut out holes of various shapes along the edge of the tabletop, hammered in wedges, and inserted combs and blocks for support or as guides. This workbench was called classical.

The simplest workbench design looks like this:

supporting frame with legs;
thick table top with a powerful surface;
additional shelf under the tabletop for storing tools and accessories;
shelves or drawers, increasing storage space.

Interesting: Popular now computer game Minecraft, which, to stimulate creativity, invites players to create virtually wood workbench from A to Z, in any modification.

Improving instrumentation and the emergence of electrical equipment affected workbench modifications. And manual processing of a new material - metal - created a completely the new kind desktop for metalwork. So by appointment Today there are workbenches:

carpentry;
carpentry;
locksmith;
universal.

DIY garage table - photo options:

A work table in the garage can be designed for different quantities workers, or zoning locations.

In this case, workbenches are distinguished:

single;
double;
multi-seat.

The addition of the capabilities of a specialized workplace has given rise to the following varieties:

folding;
mobile (on wheels);
wall-mounted folding workbench;
workbench cabinet (with sections for storing tools).

Based on the material from which the work table for processing materials is made, there are:

wooden (made of durable wood);
metal (welded structures);
combined ( wooden base reinforced with a metal sheet on the tabletop, supplemented with metal combs and threaded screws; the metal case is equipped wooden shelves and boxes).

Important: The metal parts of the workbench need an anti-corrosion coating, and the wooden parts need antiseptic impregnation.

What does it look like homemade workbench for the garage, watch the video:

What desktop does a car enthusiast need?

There isn't a lot of free space in the garage, so it's important to decide what... what goals it will be installed:

minor repairs and minor plumbing work;
a constant range of work related to home maintenance or your hobby;
amount of work in car care for complete freedom from dependence on the service station.

In any case, limited space will require garage workbench:

compactness;
sustainability;
versatility;
illumination;
performing storage functions;
safe connection to the electrical network;
raised above the floor by 15 cm for high-quality cleaning.

Dimensions of a workbench for a garage(standard - 6x4) cannot exceed 60 cm in width and 1.5 m in length. The height of the workbench in the garage is determined based on the owner’s height - up to the middle of the hands in a standing position. Best choice there will be a metal structure, since most of the work in car maintenance is metalwork. For maximum stability, it is recommended to support the supporting frame with 6, or even 8, legs.

Selecting a location- also a specificity of a garage workbench: after all, it should be convenient to work on it while the car is standing indoors. And, at the same time, it is recommended that it be removed from the vehicle by at least 1 meter. It is difficult to take into account all these subtleties with a purchased copy.

We make a workbench for the garage with our own hands - drawings:

If you make a workbench with your own hands, which one - wooden or metal?

Wooden is easier to make, but...

The choice of species again determines special purpose: faster and for simple operations - it will also be acceptable wooden frame from a powerful board (40x80mm) or timber (50x100), assembled into a rectangular structure according to standard dimensions, using self-tapping screws or nails. For structural reinforcement Use wooden spacers between the legs (top and bottom). The lower ones (at a level of 15 cm from the floor) can become the basis of a storage shelf.

The tabletop is assembled from planed tongue-and-groove beech (oak) boards or two sheets moisture resistant plywood 18mm thick, glued together and trimmed around the edges. For special strength The surface of the table top is covered with a metal sheet 5 mm thick, making a side on the wall side.

However, if you make a wooden workbench for the garage with your own hands, then this option has its disadvantages:

it is not designed for high force;
it is difficult to place several necessary devices on it at once: for drilling, sharpening, heavy bench vice;
the wear of the wooden frame is short-lived;
wood deteriorates from spilled oils and paint, filling the pores and crevices with metal dust and shavings;
There is still a risk of fire.

See how to make a workbench in the garage with your own hands - photo:

Metal desktop - the right choice

Advantages of a metal workbench for a motorist:

compactness of all structural elements while increasing reliability;
ability to withstand any force;
additional weight for stability;
the ability to take into account the features of the room by making the workbench mobile, folding, folding, shortened;
increased strength of the welded structure;
table tops can be made entirely of metal with a 3-sided side;
the tabletop has no sharp corners (for safety);
complete with 2 vices and a clamping screw;
holes are provided for clamps and stops;
allows you to perform sawing and cutting of metal, turning and grinding;
the ability to fill the space under the countertop with any storage devices (shelves, drawers, organizers, grids);
reliable fastening of drawers and shelves is ensured;
metal shavings do not get clogged in the cracks;
It can also be used to process wooden parts;
safety in conditions of fire risk;
saves employee effort;
This table is easy to clean.

For your information: A garage workbench made of metal is a bestseller in specialized stores, where only price and design improvements are of decisive importance.

But the desire for creativity leads along the path of one’s own experience.

Useful video on how to make a DIY workbench for a garage:

How to make a metal workbench for the garage?

Algorithm:

Choose a location, taking into account all the requirements for placing the car in the garage.
Prepare solid foundation for installation.
Take measurements of the installation site.
Create a sketch of your idea with all the details and improvements.
Prepare required material and tool.
Prepare structural elements.
Consider the technology for assembling and strengthening the frame.
Assemble the product.
Cover with primer and protective layer.
Conduct functionality and security testing.
Attach the necessary equipment to the tabletop.

Material required for work:

metal hollow profile (4mm) for legs;
metal equilateral corner (50x4mm) for drawers, leggings, guides for shelves;
galvanized sheet metal or stainless steel for the countertop (5 or 2mm);
metal strips for making sides;
tongue and groove board (50x150mm) for a wooden tabletop with metal upholstery (as an option);
self-tapping screws;
primer and paint for metal.

Tools you will need:

level, tape measure;
drill;
Bulgarian;
welding machine.

Assembly technology:

to assemble the desktop, a one-piece welded connection of all metal parts is used (the drawers as the base of the tabletop, legs, jumpers, rectangles for stability at the ends of the legs);
horizontal and vertical elements are equipped with permanent bevels for greater strength;
the tabletop is made of a solid sheet of metal or a board covered with 5mm galvanized iron; in the first case, the tabletop is welded, in the second, it is screwed with self-tapping screws to collets and additional strips of metal;
for arranging shelves and drawers, a corner is welded to the racks as guides (the drawers can be made of either metal or wood); the wood is treated with an antiseptic;
rectangles welded onto the ends of the legs increase the stability of the workbench and allow it to be fixed to the floor.

DIY metal workbench in the garage - photo drawings:

Final advice: You should make a DIY work table for the garage (metal) only if you are familiar in practice with the art of welding and the safety rules when doing it.