Discussed in the article various designs tool boxes are united by the ease of making them yourself. Choose a suitable project and, guided by our drawings and photographs, make yourself a convenient portable storage for the tools and equipment used in your work.
Simple open box
This box is good because the tools in it are located in their places and are in sight. You can’t put a lot of accessories in it, but there is room for the main ones. An open box will come in handy at home, when you need to repair something outside the workshop: you put in the box what is missing and go to work.
A wooden tool carrier is heavier than its factory counterparts, so you shouldn’t plan it to be too bulky. The box will not hit your knees if you make it narrow. The high handle also adds convenience - you don’t have to bend low to pick it up.
Select suitable pieces of plywood and scraps pine boards. Mark and cut out the box parts. Select grooves in the workpieces with a hand router or make two cuts with a circular saw and clean out the recess with a narrow chisel.
Details of the box body: 1 - wall (2 pcs.); 2 — sidewall (2 pcs.); 3 - bottom; 4 - groove along the thickness of the partition and a depth of 1/2-1/3 of the thickness of the material
Sand the surfaces and assemble from blanks rectangular box. Coat the ends with wood glue and fasten the parts with small nails.
Cut out a central partition from 5 mm plywood, the width of which should be 1 mm less distance between the grooves in the walls of the box. Mark the location of the arm cutout, drill an entry hole for the saw, and cut the plywood with a jigsaw.
Partition drawing
Apply glue to the grooves and install the partition in place.
Make two linings for the handle from a block with a cross-section of 20x45 mm, rounding the corners of the blanks with a plane. Prepare holders from slats for hand tools: in one, cut out recesses for pliers and pliers with a jigsaw, and in the other, drill holes for screwdrivers with a drill. Using glue and screws, secure the parts to the partition, placing them at different heights.
To prevent surfaces from getting dirty for a long time, coat the box with varnish.
Tool box in stool
In this upside-down stool, you can carry the tool to any place in the house or yard, and by placing it on its legs, you can reach a shelf or hammer a nail where your height is almost insufficient.
Using plywood or OSB with a thickness of 10-15 mm, cut out the cover (item 1), longitudinal drawers (item 2) and sidewalls (item 3) according to the dimensions indicated in the drawings.
Make a handle and four legs with bevels at the ends at an angle of 15° from bars with a cross-section of 40x50 mm.
Assemble the stool, fastening the parts with screws.
Box assembly diagram: 1 - lid; 2 - drawer; 3 - handle; 4 - leg; 5 - sidewall
Round the edges of the lid and the oblong cutout in it, and apply a finishing coating.
Box for a young master
If your child likes to make or repair, do it with him small box for his favorite instruments.
Take planed 16mm boards and cut out the parts according to the drawings. Prepare a round birch stick for the handle.
Drawings of drawer parts: 1 - side panel; 2 - bottom; 3 - handle; 4 — handle stand; 5 - holder
Draw lines parallel to the edges on the sides, corresponding to the positions of the handle posts, drill between them through holes under the screws.
Remove any burrs with sandpaper and begin assembling the box. First connect the bottom and sides using glue and screws, then install the handle stand along the marking lines.
Now replace the second post while inserting the handle into the blind holes. Screw on the screwdriver holders.
Paint the box a color of your child's choice.
Wooden box with lid
The required set of tools varies depending on the hobby or profession, respectively, and internal organization box may be different. The next option for carrying tools is suitable for any equipment and is distinguished by its solidity and reliability.
Use light wood for the box: pine, linden or poplar. Optimal thickness planed boards - 12 mm, thinner ones are more difficult to fasten, and thick ones will increase the weight of the structure.
Required accessories:
- Pen.
- Corners - 8 pcs.
- Latch - 2 pcs.
- Loop - 2 pcs.
Mark the lumber according to the drawings and cut the blanks.
Cutting blanks for the box
Table. Parts List
Make sure the cutting is correct by folding the blanks into a box. Sand all the parts one by one sandpaper No. 220 and label them. Assemble the bottom and lid of the box using clamps, corner clamps or mounting brackets to secure the pieces. Apply wood glue to both joining surfaces.
Drill guide holes for the screws and countersink them for the heads, and after fastening the parts, wipe off excess glue with a rag.
Fasten the body blanks of the portable part. Replace the partitions by screwing them on the sides and bottom.
Screw the carrying handle in the middle.
Install support rails inside the box at a distance of 30 mm from the top.
Use fine sandpaper to clean off pencil marks and burrs near the screws, and blow off dust from the surface.
Cover the box with a layer polyurethane varnish, after drying, remove the raised pile with a “null” and repeat the finishing.
Align the hinges with the gap between the body and the drawer lid. Mark and make guide holes for screws 10 mm deep, secure the hinges.
Screw the corner covers using small screws.
Install the handle and latches on the lid.
Fill in ready box tool.
If desired, place containers with dividers or cassettes for storing small items in the large compartment of the drawer.
If you decide to add partitions inside the box, make them removable so that you can change the free space for a new tool.
Reading time ≈ 5 minutes
A real owner always takes care of the safety of his tools. Even a small set should be stored orderly and neatly. Skillful Master can assemble a container for tools and accessories independently. Below we will talk about how to make a tool box with your own hands. The presented photos and videos will help in your work.
Externally, the box looks solid and stylish; it immediately declares a serious approach to the life of its owner. Its dimensions are (70x40x45 cm), that is, 70 cm wide, 40 cm deep, 45 cm high. This is quite enough to accommodate hand tools. The drawer has 3 pull-out trays, as well as a hinged top lid that opens up a spacious compartment. This box allows you to protect your tools from dust and organize safe storage.
Required Tools
To make a wooden box you will need the following tools:
- a circular saw;
- milling machine;
- grinder;
- clamp;
- hammer;
- wire cutters;
- file;
- wood hacksaw;
- chisel.
Step-by-step instructions for making a tool box
The optimal material for making the frame is oak wood. This is wonderful durable material, which is durable and resistant to mechanical stress. It is better to take 19 mm thick glued slabs as a basis. This material has no knots or rotten inclusions. Using a circular saw, cut a strip 38 mm wide.
So that when gluing individual elements did not move relative to each other, a nail is driven a little into the first part, its head is removed with pliers, and then a second board is hammered onto the protruding sharp tip.
The boards are additionally coated with glue and fixed.
The glue that appears at the joints of the parts is removed with a chisel; you just need to wait for the glue to dry a little.
The result should be a part 38x38 mm. Its end is polished.
The edge must be cut strictly at an angle of 90°, so when cutting a part to the required length, we must not forget about the cut angle.
This technique will help ensure the accuracy of the cutting angle.
The location of each part is marked so as not to get confused during assembly.
A groove is cut in each part along its entire length; it must go strictly in the center.
The grooves can be made either using a stationary circular saw, or using a milling machine.
On the parts that are intended for the manufacture of vertical corner supports of the frame, transverse markings are made.
In the rear corner parts make another one longitudinal groove. It is not needed on the front corner support parts.
For subsequent fastening in the end part of the workpieces, you need to find the center, marking the point of intersection of the diagonals.
It is necessary to carefully check the compatibility of the blanks.
The workpieces are processed with a file.
Marks are made in the loosely assembled frame in order to subsequently lengthen the grooves.
The grooves are cut out with a hacksaw.
Use a chisel to remove all excess.
These blanks are needed for drawers. A corner is cut out from the end part.
Each workpiece is drilled for bolting.
Observing accuracy, you need to drill the prepared parts.
On the part intended for fastening and separating 2 drawers, cutouts are made at an angle of 90 °.
Having installed the parts for moving the boxes in place and fixed them, they gradually begin to screw them.
The corners of the plywood blanks are cut off, as in the photo.
The walls of the lower drawers are attached to sheets of plywood using self-tapping screws.
Prepared horizontal plywood parts are attached to one side. First, this is done without using glue.
When fixing with clamps, you need to check the diagonality so that the dimensions match.
Drawers are made of plywood.
The grooves can be cut either stationary saw, or using a cutter.
The drawer parts are held together with glue.
The sides of the drawers must have grooves for movement along the slats fixed inside.
For strength, the side parts are fastened with dowels, which are cut flush.
To ensure reliability when gluing, small nails are partially driven into the surface of the front wall of the drawers, and their heads are removed.
After attaching the front panels to drawers, look to see whether the individual elements are located evenly.
When gluing, extreme precision must be observed; there should be no gaps.
Finally, the top frame of the box is made from plywood.
To make an accurate cut at an angle of 45°, it is advisable to use a special tool.
Blanks for the frame are connected and fixed when gluing using a tension belt.
Every man in his house (apartment) must have a screwdriver, a hammer and at least a handful of different nails. If this is a master with “golden” hands, then you need to have a whole set various instruments, for which you need a convenient box.
DIY tool box
Many tools (hammer or hacksaw) cannot always be placed in standard tools for storing and carrying tools. Therefore, craftsmen prefer to make with my own hands capacity the right size. Let's look at the stages of work on how to make a tool box.
Material selection
Can be used: metal or plywood. But wood, which has been the basis of carpentry for a long time, is considered a classic. Therefore, it is easier to make a wooden tool box.
Type of shell
You should think in advance and measure where the chest doors and handle options will be located. The design can be open or closed to accommodate large items. This could be a large box with compartments or a designer piece of art.
Interior decoration
The model can be simple for storing various small items or multifunctional: a separate row with holes for various screwdrivers, pencils, glue, pliers, etc.
Drawers on several levels are convenient; they can be inserted into each other or pulled out. The main thing is to achieve maximum order in the arrangement of parts, so that there are nails, screws, tape measure, power tools, etc. separately.
When manufacturing a specific model, it is necessary to take into account the operating conditions:
- storage location (apartment, basement or garage);
- humidity level;
- temperature;
- frequency of use of instruments and devices ( professional activity or for home).
Tool Box Designs
Before purchasing a compact model for different tools, we list the types of designs:
- The boxes are made of hard, durable materials, often rectangular. There may be a couple of pull-out compartments on the side. Hinged or removable lid with lock. The model is convenient for constant movement.
- A set of drawers is a set of open trays different sizes convenient for home.
- The case is a compact, durable suitcase, with a convenient wide opening, and a handle on the side is a must. Large tools will not fit.
- An organizer is a low container with many cells. There may be a case or a bedside table with compartments for small items.
- The tray looks like an open box with recesses, there is no handle. Not convenient for transportation.
- The bag looks like a sports bag, handles. The model is roomy, but not reliable, and the fabric allows moisture to pass through.
- The backpack is suitable for storing tools, but it is inconvenient to get them out.
- A container is a compact closed product with many drawers and sections, some removable. Transformers are especially convenient.
- The trolley is used in factories; it is a large container on wheels with a comfortable handle. There are many sections, easy to move over short distances.
Clothes for tools
- This is a vest with pockets where various tools are distributed.
- A belt bag is an indispensable item for repairs.
- An apron with ties at the neck and a belt with pockets.
- Rolled storage case.
Types of Best Tool Boxes
An important role is played by the material from which structures for storing and moving various tools are made:
Tool box on wheels
Models made of plastic (metal) with a vertical body with 2 wheels. Convenient handle and lock, the model accommodates many sections. The only negative is the high price.
Aluminum
Boxes made of aluminum are the most durable and reliable. Popular models of metal boxes for any tools:
- Fit 65610 – aluminum body, equipped with a handle, mobile partitions inside, weight 1.5 kg.
- Dexter is the most compact drawer for small parts.
- Wilton 16910U is a convenient suitcase made of aluminum with steel hinges. Weighs 3 kg, has many pockets on the lid.
Car boxes
- Bawer is a universal model that fits conveniently under the car frame. The car box is strong and reliable, made of galvanized steel, but weighs 12.4 kg.
- KAMAZ - simple reliable design made of metal for long-term storage of any equipment.
- I-580 – the most convenient model made of polyvinyl chloride (impact-resistant plastic with 3 types of steel). Weight 35 kg, capacity 90 liters, reliable locks, perfectly protected from moisture.
Large containers
- STANLEY Mobile Job Chest is the most practical, dimensions: 962:600:600 mm, made of thick plastic, amazing in capacity.
- StanleyFatMax with the most thoughtful functionality. Cover with latches, inside 3 sections, there is a lower section for large instruments. Handles on the sides and wheels make it a popular model.
- Peli 0450 – considered the most mobile: 3 handles and wheels with reverse motion. The case's sealed, impact-resistant stainless steel body, voluminous sections and containers are easy to insert into each other. The only negative is the large weight and volume.
For the balcony
Inexpensive models are suitable for storage on the balcony:
- Fit – the case is ideal for small parts; you can change the size of the cells. Durable plastic latch.
- Lot-3 – accessible, inexpensive and compact, has a handle and colored trays.
- MosPromTara for home, no sections, but there is a lid.
Organizers are more convenient in everyday life for ease of transfer to any place.
With combination lock
- Brauberg – used for transporting valuables. The impact-resistant case is made of 8 mm steel and plastic, with 6 cells inside.
- Hairway - with the greatest protection (metal with plastic), locks with a code on 2 sides of the model, dimensions: 420x215x330 mm.
Metal
- Intertool is a popular box with 5 compartments, a secure lock and a comfortable handle.
- STANLEY Expert Cantilever is practical and convenient, 5 folding compartments, protection against finger injuries, comfortable handle, but heavy.
Plastic tool boxes
- StanleyClassic made of impact-resistant plastic, comfortable design.
- Tayg is made with amazing rationality, everything is compactly placed.
Professional
Stanley is reliable and irreplaceable, protected from corrosion, the handles are equipped with soft inserts. Removable castings inside, special compartment for drills, etc.
Bosh LT-BOXX - simple to use but reliable. The strength of the product is ensured by acrylonitrile butadienestrol.
Photos of the best tool boxes
Every man will agree that a high-quality and multifunctional tool box is an almost irreplaceable thing in the household. Many craftsmen prefer to buy a ready-made box in the nearest store, where a wide range is available. But such a device can be made independently, in accordance with personal wishes. Moreover, the manufacturing process itself is not considered difficult, so even a beginner can cope with this task.
Classification of tool boxes
There are several basic criteria due to which multifunctional products can be divided into several main groups.
According to the material from which the body is made:
By type of stored instruments:
Design of modern boxes
When talking about the design of such boxes, we do not mean their shape, but the method of opening and the presence of auxiliary sections. The following designs are considered standard today:
Making a box from plywood
To make a tool box with your own hands from plywood, you will need the following tools and materials:
Before you start manufacturing, you need to carefully work out the design of the future product (the drawing can be made on a computer or on plain paper). Produced necessary calculations, the main dimensions are fixed. After that all marks must be transferred to a sheet of plywood. This can be done using a regular ruler, tape measure, marker or even a pencil. All blanks for the future box are cut along the intended lines. It is also necessary to mark all the grooves and cut them on the blanks. Irregularities formed during the work process can be processed with a chisel. It is thanks to the grooves that the final design of the box will be stronger and more durable.
On next stage The entire structure is being assembled. To glue small parts, use high-quality wood glue. The main sides of the box are also glued together. To improve the result, they need to be pressed tightly together. It is best to use a special rubber strip for this. It cannot be removed until the glue has completely dried. The corners on the doors need to be rounded.
A convenient handle for a tool box can be made from MDF. Initially, the layout is drawn directly on the wood and only then cut out. When the handle is ready, the surface must be processed. It is attached using wood glue and screws. If you don’t want to make a handle yourself, then you can purchase it at a hardware store. Main criterion the right choice- high strength and reliability. Now you need to attach the outer lid of the drawer and door. All parts are put in place, and then the areas for attaching the hinges are marked with a pencil.
To organize the drawer, you can make small compartments. All components are cut out according to the same principle as the box. Grooves are made and glued together. On one side of the box you can make a special compartment for storing screwdrivers. The most convenient option is considered to be one where this function is performed by special inserts with slots made of plywood. Velcro is applied to the other side of the drawer to store cables and extension cords.
Wooden box manufacturing technology
This option is considered a classic of carpentry. Drawings of this portable storage facility were published in magazines 50 years ago. For the manufacture of you will need a high-quality board with a thickness of 10 to 20 mm, as well as a hacksaw for wood. Thanks to the simple manufacturing technology, many craftsmen still choose this option.
The classic design does not provide for separate compartments or special multifunctional devices. The final product will look like a neat, deep box with a comfortable handle along its entire length. This shape of the handle has a practical purpose. After all, if the weight of the tools used is unevenly distributed, then you can always find the center of gravity point.
A practical addition could be an insert section with its own handle, the height of which occupies 50% of the entire drawer. This insert can be used for small tools(awl, screwdrivers, small keys), as well as Supplies(screwdriver bits, electrical tape, drills). Any type of wood can be used to make it.
Universal case made from a plastic canister
If you want to make a tool box with your own hands, but don’t have a sheet of plywood, then you can use regular plastic canister. To work you will need:
- Hacksaw.
- Plastic container.
- Fastening elements.
The canister used must be rectangular shape with a comfortable handle, which should be located in the center. In addition, it should be equipped with a screw cap that will be used as a lock.
The process of making the box itself is quite simple. Using a hacksaw, you need to make cuts in the canister. The first cut should fall on the center of the neck and the handle of the container, it is best to remove the stopper, and saw through the top wall. The second cut is made exclusively in the horizontal direction. It is best if it is located in the upper part of the canister, on the end sides. Samu plastic container you need to cut from the top wall at a distance of 4 cm, and on the sides at a distance of 3 cm.
When all the cuts are made, the canister can be opened. To do this, you need to bend all the side parts of the top cover with the halves of the handle. In this box you can store various materials for fastening: nails, bolts, screws, nuts. The upper part must be closed by folding the handles together. This device is secured with a screw cap.
To make the box as strong as possible, additional gaps must be made on the end walls. Small holes are drilled in the lid itself or in the walls into which hooks are inserted, as well as bolts and nuts.
Metal box for tools
This option is most suitable for experienced locksmiths who have necessary equipment and material. Factory-made metal tool boxes are made from lightweight metals such as aluminum. As a result, the product is as light and durable as possible. But working with aluminum at home is much more difficult.
Even a beginner can make this version of a metal box. After all, the most ordinary box and special partitions will be made of metal. Initially, you need to prepare the main material - galvanized steel (0.4 mm thick). Tools you need to prepare:
- Marking caliper.
- Metal square.
- Ruler.
- Hammer.
- Pliers.
- File.
- Sharpened core or marker.
- Anvil.
Next, drawings and markings are made. You only need to mark those places that will later need to be deleted. Now you can start cutting using metal scissors. After cutting off all the excess you should get a kind of geometric figure(winged rectangle).
Next you need to use an anvil. Tapping with a hammer, gradually bend the edges of the workpiece. It is better not to work in a chaotic manner; all actions must be consistent. First, one side is bent, and then another. To wrap protruding parts, pliers are used.
After these manipulations, you need to go over the entire structure with a hammer to level it. In this case it will be small metal box for storing tools. In the future, you can experiment not only with the sizes, but also with the shapes of such boxes.
Almost every home has some kind of tool. When there are too many of them, you can make your own multifunctional box to store them. Experienced craftsmen believe that this type of box is considered an essential attribute for storing various devices. Such boxes can be stored in the workshop and even taken with you on a long journey.
- Types of convenient boxes
- Material selection
- A box that looks like a stool
- Small portable option
The master always has his own tool at hand. It allows him to quickly cope with assigned tasks. There are never too many tools. Sooner or later there will be so many of them that there won’t be enough pockets to hold all the screwdrivers and rulers. Need a box. They cannot be stored in disarray. Impacts, friction - drills become dull and quickly fail. During work, there is not always time to look for the right screwdriver, so the space of a capacious wooden storage must be used, and the entire volume must be divided into separate compartments.
The easiest way is to buy a container made of plastic or iron. Inside ready-made models The storage space for tools has already been thought out in advance, divided into several compartments. But homemade box It is assembled for each specific craftsman, taking into account storage locations for tools, consumables and fasteners. For some people the most suitable simple models, others will need a multi-functional carrying case. It makes sense to find out what types of portable storage there are in order to choose suitable model, and then construct one with your own hands.
Types of convenient boxes
According to the form of manufacture and purpose, tool boxes are classified:
- Portable.
- Stationary.
- Special.
Portable containers for carpentry tools are compact models, inside of which a small number of things needed for work can be placed. The complete set of the case depends on the specialist’s specialization. Its design involves a strong lock that will not open during long-term transportation. The portable box is constantly in motion, so it is important that there are several types of fastenings inside it, convenient niches in which you can, for example, put screwdrivers and secure them so that they do not dangle or knock.
It is quite difficult to make a stationary tool box with your own hands. And all because its design is much more complex than that of a portable one. There is no need to think through the arrangement of fasteners inside. The main thing is to form certain compartments and divide them into groups.
A special case is made for strictly individual needs. It can, for example, only store drill bits or wrenches of various sizes. Such a box for small tools is more convenient than universal storage. To perform work, sometimes a master needs to take several special cases with him at once. Before you start making a storage unit, you need to decide which option is most suitable for the job.
To do this you need:
- make an inventory of available tools;
- arrange them into groups;
- distribute by size.
Then it will immediately become clear which box is best to make for tools. The article has several instructions that will help solve this problem. First, it is important to choose the material that will be easiest to work with.
Material selection
The hardest thing to make is a tool box made of metal. This material is not suitable for a portable design - the case will be too heavy. Suitable for stationary models in which iron keys or heavy components will be stored. Welding will be required during operation. If you have the skills and ability to use it, you can try it. If they are not there, plywood 8–10 mm thick can replace metal.
It only looks fragile, but it is a very durable material. The parts are fastened together with screws and additionally coated with PVA glue, as they will quickly become loose. To construct the frame, it is better to use hardwood blocks. The walls of the housing must be thicker - at least 10 mm. Boxes with compartments for carpentry tools are best made from 8 mm thick plywood.
The mobility of stationary plywood boxes will increase noticeably if you attach rollers to the bottom, which can be bought at a furniture store.
Boxes under different instruments made of wood - carpentry classics. This material allows you to create any models with your own hands.
Small tool storage case
If you need to have a set of small tools on hand, you can get by a simple box with a handle. The process of its manufacture must be divided into several stages:
- The first stage is planning, making general calculations, drawing. It should show the order of subsequent actions. The drawing is drawn up independently, or you can use computer programs.
- The second stage is preparing the necessary building materials. This wood sheets 10–15 mm thick, nails, fasteners. May be needed for work measuring instruments, hacksaw and hammer.
- The third stage is manufacturing. Using the instructions, you can assemble a simple open tool box with your own hands (photo).
Before starting work, you need to make a drawing.
- Number 1 – the walls of the box (two pieces).
- Number 2 – side panels (two pieces).
- Number 3 is the bottom of the box.
- Number 4 is a groove made according to the thickness of the partition. Its depth should be equal to one third of the thickness of the plywood.
All parts are cut out using a hacksaw using plywood blanks. Then the edges of the workpieces are sanded with sandpaper. A box is assembled from the largest parts, its sides are coated with PVA glue, then additionally fastened with small nails (it makes no sense to use bolt fastening here). The handle-holder (which is also the partition) is made according to the following scheme:
Plywood with a thickness of 5 mm is selected. The hole for the handle is cut out using a jigsaw. The workpiece is inserted into the grooves made, which are pre-coated with PVA glue. To prevent the handle from cutting your hand, you need to take a block with a cross-section of 20x45 mm. The edges of the block are rounded with a plane. A slot is made across the entire width into which a piece of plywood is simply inserted. In the end it should look like this.
At the edges of the plywood handle (this is clearly visible in the photo) they are attached wooden slats, in which recesses-holders for pliers, pliers, wrenches or screwdrivers. The toolbox is ready. To prevent it from getting dirty, you need to paint it in several layers with wood varnish.
Using the same plywood, you can make a large box with your own hands, which with a slight movement turns into a stable stool. This was invented by craftsmen working with carpentry tools. You can take this drawing as a basis.
For these parts you need to make four legs measuring 375x50, with bevels at the ends made at an angle of 15 degrees. And also a handle 660 mm long and 40 mm wide. Along the edges there is the same bevel. And here is a visual plan of its assembly.
The stool is assembled according to the proposed scheme, the parts are fastened with 4.5x60 mm screws, and not with self-tapping screws. On finishing stage it turns out to be a box like this. Making it yourself is simple, and the result is multifunctional storage for tools. If you turn it over, you get a stable stool.
Small portable option
There is the most easy option making a box that is suitable for the average homeowner. Externally it will look like in the photo.
The model is accompanied by a detailed drawing:
Number 1 indicates the side, number 2 – the bottom of the wooden box, number 4 – the handle stand. The handle itself is a block measuring 382 by 30 mm. Another detail is the holder - a rectangle 118 mm wide and 55 mm long. You need to make three identical holes in the holder. A drill is used for this. Assembling a large box begins with connecting the bottom and side, then installing the handle stand. The photograph shows all stages of the upcoming work.
Then the second stand is installed, and at the same time the parka holder is inserted into the blind holes. Then the fasteners for screwdrivers are installed. This is what should happen in the end.
