Every girl dreams of a house for her dolls. Now there are a huge number of them on store shelves. But such pleasure is not cheap, and the assortment is the same.
We offer to please your child with a handmade gift. This will allow you not only to save money, but also to make the house one of a kind.
In addition, this will be a wonderful pastime for the whole family during leisure time.
There are many special training programs for making doll houses with your own hands. You can use a wide variety of Construction Materials: boards, plywood, chipboard, laminate, cardboard, etc.
As a rule, the front wall on dollhouses is not made, or it is made removable or opening so that your child can put dolls there, change the decor in the rooms, and tidy up.
Choose the material - and we will teach you how to make a dollhouse with your own hands!
Dollhouses made of plywood and laminate
These are the most popular materials. Distinctive feature from “brothers” - stability and longevity. It is easy to decorate both outside and inside. But making such a house requires male strength.
If you try, such a house will be indistinguishable from the store version.
Diagrams and drawings can be found on the Internet, but if you have technical inclinations, you can try to draw it yourself. There are also photos of finished dollhouses on the Internet.
To make a house we will need:
- thicker plywood (from 7 mm);
- electric jigsaw;
- glue;
- self-adhesive floor;
- pieces of wallpaper;
- tape measure or ruler;
- pen;
- scheme;
- a little imagination and patience.
Let's get to work, first deciding on the dimensions dollhouse(they will depend on the dimensions of the “tenants”):
- we cut out the walls of the future house from plywood or laminate;
- we cut out windows and doors in them;
- we glue the walls together; it is also fashionable to use construction nails or staples;
- we make a roof, it can be either flat or sloping. To give real look you can use corrugated cardboard and then paint it;
- We fasten the resulting structure to the foundation - a sheet larger than the house itself. On an unused area you can make flower beds, sidewalks, a platform, and a parking lot;
- we glue wallpaper and lay floors;
- furnish the house with furniture;
- you can also add curtains made from pieces of fabric, bedspreads, rugs, etc.
Dollhouses made of plasterboard
Many household parents, after renovations, leave the remaining building materials to gather dust on the balcony in the hope that they will come in handy someday. Their time has come! Drywall can make an excellent dollhouse.
The good thing about a house made from this material is that it is very light and easy to assemble. But, at the same time, it will need to be handled more carefully - it will be quite fragile.
The layout of such a house is no different from a product made of plywood or laminate. But assembling such a house is much easier, and there are many more layout options - with the help of partitions you can divide the rooms between each other.
Foam houses
To assemble such a house we will need:
Note!
- sheet foam;
- glue;
- canape sticks;
- rulers;
- bamboo sticks;
- cardboard;
- pieces of wallpaper and fabric;
- dye;
- sponge for washing dishes;
Pieces of plinth for the ceiling
Let's get started:
- make a diagram;
- cut out walls from foam plastic;
- we make doors and windows in them;
- we connect the walls using toothpicks, then glue the walls together;
- to make the roof stronger, we first install bamboo sticks on top of the walls, and only then glue the roof to the walls;
- we make a ladder from wooden rulers or the same polystyrene foam;
- You can also use toothpicks for railings;
- in addition, if desired, you can also make a balcony, massandra or even a terrace from polystyrene foam;
- painting the house;
- We decorate the house inside as in the previous description.
Houses made from bookshelves and cabinets
House from old furniture it won’t be difficult to do - after all, the walls are already ready.
All that remains is to cut windows and doors in them, and think about what to make the roof out of, if necessary.
It can also be made from the materials described above. We arrange the furniture, let the cat in - happy housewarming!
Cardboard houses
For this design we will need:
Note!
- cardboard;
- house detail templates;
- scissors and stationery knife;
- gouache or watercolor paints.
We are building a house:
- if you have big piece cardboard, then we do not cut it, but bend it in places according to the diagram, and then glue its component parts together.
- install interior partitions made of cardboard, they will serve not only to delimit space, but also to fasten the frame structure.
- Let's get started with renovations and furnishings!
House made of boxes
The simplest and quick option. All you have to do is pick required quantity boxes (depending on the number of rooms), we fasten them together using a stapler, having previously placed them on their sides so that the top of the box serves as an exit.
This will allow you to open the front wall at the right time to rearrange, tidy up, etc.
We cut out windows and doors. Let's start designing the frame.
Note!
House made from paper folders
It requires four folders. We cover them from the inside with wallpaper or printed sheets with decorative items and household appliances in a plane.
We cut out windows in the folders, install the folders vertically, and fasten them with the help of clips that are included with each folder. Your house is ready.
Fabric house
This option is good because it takes up virtually no space and can even be folded up.
Using a thick piece of fabric, we make the back wall - it will serve as the foundation. We sew a rectangular base for the house. We make pockets to which the cardboard for the floors will then be attached. We attach ribbons to both corners of the pockets.
All that remains is to sew the pockets with a rectangular base on one edge so that the ribbons end up with reverse side. Floors using tapes and sewing the tapes to the back wall. Let's decorate the house and start playing!
You can make houses from other materials - the main thing is to show your imagination! It will also be a wonderful gift for a boy - after all, you can build a garage, parking lot, etc.
Photo of a dollhouse with your own hands
Every girl dreams that her favorite Barbie doll has a beautiful and cozy home. Of course, you can buy it in a store, but the price is often not encouraging. We suggest you make a house with your own hands. You can easily cope with this, and your daughter will be only too happy to help. In addition, for its construction you can use almost everything that is at hand!
Materials and tools
Whatever model of house you choose, during construction and finishing you may need the following tools:
- glue “Moment” or PVA, depending on the material;
- scotch;
- scissors;
- paints and brushes;
- colored paper or anything that can replace it (stickers, wallpaper, pictures);
- ruler or tape measure for measurements.
For interior decoration, scraps of fabric, fur or leather, beads and seed beads, bamboo sticks and whatever your imagination tells you will be useful. But main question consists of what to make the walls of the house from. It turns out that there are a huge number of options here too. You can use cardboard boxes, scraps of plywood, fiberboard or drywall, boards, and even old furniture!
You can even make such a doll house yourself from scrap materials.
The house can even be two- or three-story, horizontal (without a roof and with a top view) or vertical (with a removable front wall), simple or complex to manufacture, requiring certain skills in carpentry. But in any case, building and arranging it with your own hands will be an exciting activity for the whole family. In addition, you can make furniture and interior items for the dollhouse yourself from the same materials at hand.
House made of fiberboard
You can easily make such a house model from fiberboard or plasterboard by gluing the parts with PVA glue. Most likely, you won’t even have to buy anything: many people have surplus building materials after renovation. You will also need:
- cardboard;
- wallpaper;
- colored paper;
- bamboo slats (they can be removed from the hot tray).
A house for Barbie can be made from fiberboard or plasterboard, gluing the parts with PVA glue
The peculiarity of this house is that in addition to three floors, it has an attic. We proceeded from the following dimensions: height - 65 cm, floor area - 16 X 28 cm. You can calculate the parameters suitable for you and draw a diagram according to which you will make the house.
Calculate the parameters of the future house and diagram it on paper
Note! Before you start making calculations, decide where the house will be located. Often such products stand in one place. The design should not take up much usable space, “clutter up” the room and get in the way.
According to the sketch, cut out the walls, roof and partitions between floors.
Cut out the walls, roof and partitions between floors
Connect all parts using PVA glue.
If the PVA glue is not thick enough, you can add a little sawdust for extra strength.
Cover the roof of the house with corrugated cardboard.
Cover the roof of the house with corrugated cardboard
Walls of the house with outside decorate with colored paper. Glue the bamboo strips.
Execute external finishing house using colored paper and bamboo strips
You can decorate the base to make the house look more elegant. For example, stick on pre-cut “bricks” from colored cardboard.
The base can be decorated with cardboard ‘bricks’
Glue the entire building onto a frame made of fiberboard or plywood. It should be larger in area than the floor of the first floor. Firstly, this will give the house stability, and secondly, it will be possible to organize a “flower garden” on the frame.
Glue the house onto a frame made of fiberboard or plywood
Cut out window frames from thick cardboard.
Cut window frames from thick cardboard
They need to be glued on both sides.
Glue the frames to the windows on both sides
Make a balcony. For the floor and railings, use thick cardboard; simple toothpicks will serve as balusters.
Cut out a door for the balcony from thick cardboard
You can attach wire hooks to the railings. Hang a cardboard box with toy flowers on them.
The balcony can be decorated with a toy flower garden
Insert an attic window.
Design an attic window
The front door is also very easy to make. It is enough to paste over the cardboard base with a picture cut out from an advertising brochure. The handle can be made from plasticine.
In order to create the effect of a grass lawn around the house, cover the frame with the hard parts of ordinary kitchen sponges. Make flower beds out of cardboard boxes and “plant” them with plastic or paper flowers.
Interior decoration
The inside of the house must also be beautifully decorated to match its owner - the most beautiful and fashionable Barbie doll.
Cover the walls with wallpaper, colored or wrapping paper, it depends on the purpose of the room. For the floor, colored cardboard and cellulose kitchen napkin are suitable (it imitates carpet covering), fabric with a soft texture.
Complete the interior decoration of the house using wallpaper, wrapping and colored paper, cellulose kitchen napkin
Ceilings can be covered with white paper.
Be sure to make curtains by hanging them on curtain rods from bamboo strips.
From cardboard boxes
For such a house you will need:
- cardboard boxes - according to the number of rooms;
- glue - you can use a stapler or double-sided tape;
- wallpaper, colored paper, magazine clippings, organza, fabrics - for decoration.
If this model is too big for your living space, you can make a folding house that is easy to make and very compact. To do this, just connect two cardboard sheets crosswise into grooves. Cut doors in the walls, cover the “rooms” with wallpaper and pictures, and celebrate a housewarming party with your favorite doll and her friends.
Make a compact house out of cardboard by joining two sheets of cardboard crosswise into grooves.
From plywood
This option is more difficult than the previous ones; you will need patience and the ability to work with tools.
A plywood dollhouse is more difficult to make, but the result is worth the effort.
For a plywood house you will need:
- hammer;
- jigsaw;
- nails;
- sandpaper;
- primer;
- dye;
- wallpaper or adhesive film.
Think about the layout of the house. Cut out the parts from plywood. Use the drawings below or come up with your own project. You can change the sizes as you wish. Just remember to maintain proportions.
Be sure to sand all surfaces so that the child does not injure himself on burrs while playing. Assemble all the parts according to the plan.
Assemble all the parts according to plan
Attach the back, front and side walls to the top of the base. Cut out the windows. Their dimensions are 9 X 6.25. The triangular window is the same width as the others, and its shape and height must be calculated according to the angle of the roof.
Cut out the windows
A plywood house needs to be nailed together.
Glue will not work here: PVA is unlikely to hold the parts together firmly enough, and “Moment” will look sloppy at the joints.
Cover the gaps formed between the parts with a primer.
Paint the outside of the house a suitable color.
Paint the outside of the house
Paint the internal surfaces, cover them with wallpaper or self-adhesive film - as desired.
Paint, wallpaper or self-adhesive film the dollhouse rooms
You can lay felt, fleece or carpet on the floor. Furnish your home and invite Barbie to your housewarming party!
You can make the front wall of the house in the form of opening doors.
The front wall of the house opens up like cabinet doors
An ordinary Christmas tree garland will provide lighting in the rooms.
By using Christmas tree garland can you make lighting in the house?
From old furniture
Consider the option of creating a house for Barbie from an old chest of drawers. Please note that such a massive thing will require a lot of space in the room; its mobility or compactness is out of the question. But such a house is strong and durable.
Buying almost anything now is not a problem. But the beauty of making a dollhouse from plywood with your own hands is that you can also involve a child in this process. Suitable as source material use plywood - the durability of the structure, its remarkable appearance guaranteed at relatively low costs. And cutting sheets and processing fragments will not cause any difficulties; All you need is a simple household tool.
What is a dollhouse? The banal answer that this is a spacious box in which a favorite toy and its outfits are stored is unlikely to be correct. You can make it yourself various options houses, differing in their configuration (vertical, horizontal), complexity of layout (several levels-floors, with many compartments-rooms). External design is a completely separate matter. If you turn on your imagination, you will be able to make do with what you have at hand. In addition to glue and colored paper, in any house there is always something left over after another renovation - pieces of wallpaper, film, fabric, and so on.
What plywood should I use? About making a dollhouse out of it - optimal solution, partially said. It should only be noted that it is being assembled for a child’s toy. It is the strength of the structure itself and its “ecological cleanliness” that should be the main criteria to be guided by when choosing products.
One of the problems that is solved in the process of making something with your own hands is reasonable savings. Consequently, there are practically no options for which plywood to choose - inexpensive, moisture-resistant and “environmentally friendly”. These criteria are fully met. By the way, they are often confused with FSF products, since it is difficult to distinguish these plywoods externally even for a specialist.
- When choosing plywood, you need to pay attention to its markings. The safest products are those that have the letter E0 in their designation. Such sheets contain a minimum of formaldehyde, and they are the most suitable for making a dollhouse.
- The optimal plywood thickness is 5 mm. This choice combines light weight, structural strength and the convenience of strengthening it with nails.
Options for size charts
The linear parameters of the house depend on which doll it is being made for (and maybe for several) and where it will be installed. Therefore, it is more correct to familiarize yourself with the photos and drawings available, for example, on the Internet, and based on this, inspired own ideas, make your own, original diagram, most suitable for local conditions.
Features of making a dollhouse
Any dad can cut plywood into fragments of certain dimensions and configurations and connect them together according to the developed diagram. No step-by-step instructions are required for this process. But there are a number of nuances in working with FC, which House master should know.
To avoid “production” errors (and errors are inevitable even in measurements), similar parts of the house should be made according to the following scheme. First, one part, and then make sure it matches the required dimensions. And only then, using the workpiece as a template, cut out and process the rest. Otherwise, after assembly, it will turn out (more than likely) that the house will be somewhat skewed, and you will have to redo some things.
It is better to cut plywood with an electric jigsaw. WITH hand tools problems will arise - uneven cuts (not along the line, especially if it is figured), “tattered” ends of parts, partial peeling of the veneer in the working area.
Given the relatively small thickness of plywood, the joints practiced for solid wood blanks (saw cuts, tongue and groove) are unacceptable. Therefore, only by gluing with subsequent fixation at individual points with small nails. In terms of safety for the child’s health, it is better to use a casein composition. Such wood glues are most often used in modeling and making furniture yourself, and buying a dry mixture and preparing the solution yourself is quite simple. .
Both at the stage of assembling the dollhouse and after its manufacture, it is necessary to carefully process all the edges of the parts. Even if no defects are identified, it’s worth going through the “sandpaper” once again. Microscopic fractions, visually and imperceptible, are potential thorns. Don't forget about the tender hands of children!
Dads should take into account that girls (like all women) have their own secrets. Therefore, in the lower part of the dollhouse or on the side, you should provide drawers or boxes with doors in which you can hide something. Mini hinges are suitable for fastening the sashes (it’s easy to choose required sizes in any furniture shopping center).
If the size of the dollhouse is significant, then it is more advisable to first mount a frame from bars of a small cross-section, and then cover it with pieces of plywood.
When drawing up a diagram, it is worth considering that you plan to assemble not just a box for storing toys. Even himself small house will need some internal filling. What it will be - a mini-table, a crib - is another matter. But already at the design stage it is necessary to provide possible options and choose sizes so that the rooms are spacious enough.
Advice. When deciding how to decorate a dollhouse, do not forget that here, when choosing materials, you should take into account their component composition. Selected species stains, oils, paints, varnishes contain toxic substances.
If you really get excited about the idea, plan everything carefully and prepare in advance, then you can make a dollhouse with your own hands in just a few hours. Even half a day off is enough for the child to enjoy a home for his toy for a long time.
Your little princess is growing by leaps and bounds. And now you have already equipped her children's room, which is full of toys. But as always, something is missing. Or maybe make a dollhouse with your own hands from plywood? Its scheme is simple. Your daughter will play with such a house much longer than dad or grandfather built it.
A piggy bank of creative ideas
Every girl dreams of having a real doll house in her room. Buying such a design in a store is easier, but not cheaper. Moreover, the quality of many toys is Lately leaves much to be desired. If you are going to make a dollhouse with your own hands, you will need drawings to cut out individual parts.
Plywood - universal material. It is durable, ergonomic, has an acceptable price category, and it’s a pleasure for the master to work with her. You can come up with a unique plywood dollhouse. Drawings are easy to find on the World Wide Web. Fortunately, progress has provided us with such opportunities.
Here are some ideas for building a dollhouse:
- simple sketch;
- complicated version;
- New Year's dollhouse.
The complexity of the structure being built depends on your skills and abilities. First, all the parts are cut out of plywood and then assembled together. A dollhouse can be small or human-sized.
Take care to cut out doors and windows. Children can be involved in the design process. They will be able to decorate the dollhouse at their discretion. Your imagination also plays an important role. Housing for dolls can become a smaller copy of a real house with stairs, a bathroom, a bedroom, a living room, a nursery and furniture. Try it, it's very interesting and exciting.
Let's give a gift to the little princess
Things made with your own hands are always more valuable. If you decide to give a gift to your daughter, try constructing a dollhouse out of plywood with your own hands. Step-by-step instruction will be for you visual aid. Start by making a drawing. After taking all measurements, calculate the required amount of plywood. Go to the store and buy everything you need.
One side of the house, the façade, is always open. It should be comfortable for the child to play with such a design. If you want to make an exclusive dollhouse, think through everything down to the smallest detail, including the decor, and also equip it with lighting.
Necessary materials:
- drawing;
- plywood sheets;
- electric jigsaw;
- drill with various drill bits;
- heavy-duty glue;
- yardstick;
- pencil;
- ruler;
- water-based or decorative paint;
- brush;
- self-tapping screws;
- LED lamp;
- power unit.
Step-by-step description of the creative process:
- We start by constructing a drawing. We place all the details separately on a sheet of paper. Indicate the desired size. You can take the dimensions specified in the photo.
- We transfer the drawing onto plywood sheets. For convenience, we will use a ruler and a simple pencil.
- After we have drawn out all the details of the future dollhouse, we begin cutting them out. You can conveniently and quickly cut out parts from plywood using electric jigsaw.
- This stage is the most critical. We carefully and very carefully measure all sizes. It’s better to measure seven times. Otherwise, the house will not turn out beautiful and even. The parts must fit together perfectly.
- Let's immediately cut out all the details of the dollhouse. This is the mountain of individual pieces of plywood we ended up with.
- To avoid confusion when assembling the house, we will label each detail in accordance with our drawing.
- To make the house look like a real one, and for your princess to enjoy playing with such a design, we measure and cut out the doors and windows. You can't go anywhere without this.
- To make it more convenient to cut small windows and doorways from plywood, first drill four points.
- Now, starting from the hole, we will cut out the window and door using an electric jigsaw.
- We need to decorate part of the wall of the house and the balcony. To do this, draw two parallel lines and make symmetrical points on equal segments.
- Drill each point to create a through hole.
- We cut the distance between the holes using an electric jigsaw. It turns out this is an original carving.
- When all the details are prepared, take sandpaper and sand the plywood on all sides so that no splinters are scary for the little princess.
- Now we begin the assembly in accordance with the sketch.
- We treat the side sections of the plywood with wood glue, and then additionally fix them with small nails.
- We make sure that the nails do not penetrate through the plywood, otherwise the baby may get hurt.
- After we assemble the frame, we fix the floors on the floors. If you took the measurements correctly, these parts will fit perfectly.
- The finished house can be painted with water-based or decorative paint.
- After complete drying, you can start lighting the dollhouse. To do this, you need minimum power LED bulbs, as well as a power supply.
- We connect the wires and bring the lamps out into the holes made in the plywood.
- We install the power supply on the back wall of the dollhouse.
- Let's not forget to install a switch so that your daughter can independently turn on and off the lights for her dolls.
A dollhouse is every girl's dream. Store shelves are full of a variety of house options, but the prices are often quite steep. You can give your daughter a lot of positive things by making a house with your own hands. This way you and your baby can choose wallpaper, accessories, as well as the desired size of the future house. In our article you will find several master classes, drawings and templates that will help you make a house for dolls.
House for dolls photo
Doll house drawing
Dimensions are indicated in millimeters.
House for dolls made of cardboard, diagram with photo
The dimensions of the parts in the diagram are indicated in millimeters.
Large house for dolls made from boxes with your own hands, step by step with photos
Most affordable way to make a dollhouse is to make it from cardboard boxes, which are found in every home. In addition, the house itself can later be covered with remnants of wallpaper, any other paper, painted or sheathed with fabric. Also, over time, you will have the opportunity to add new rooms and floors.
For creating cardboard house prepare:
- large cardboard box;
- stationery knife;
- scissors;
- pencil;
- scotch;
- materials for decoration.
Start by cutting the box in half.
The larger the box you choose, the larger your home will be. For Barbie dolls, a box, for example from a microwave, is suitable, and for baby dolls or small toys you can use small boxes.
Cut off the flap tops of the box from each half.
From one of the cut pieces we cut out the front part of the roof. On one side of the second piece, make a rectangular cutout stationery knife, which will serve as the exit to the stairs. Using tape we glue the parts together.
From the remains of the box we cut out 2 parts for the roof and the floor for the attic floor. We do exactly the same thing on the floor. rectangular hole for the stairs. Glue the parts with tape.
Let's draw a drawing of the windows and doors on the front side of the house, and then use a utility knife to cut out all the details. From the remains of the box we cut out 2 ladders and glue them with tape.
Video on how to make a house for dolls
How to make a house for paper dolls
Girls who are interested in paper dolls will definitely like houses for them. Making paper houses is easy, and most importantly, their appearance depends entirely on the child’s imagination. Grown-up girls will be able to make such houses on their own, but very little girls cannot do without the help of adults.
The very principle of creating houses for paper dolls is somewhat different from creating houses from cardboard or plywood. The most advantageous material for such houses in terms of durability is cardboard. Furniture drawings are applied to it, and slots are made for doors, windows, cabinets and beds so that the dolls can rest and have a snack. The creation of each room must be approached with special attention and arrange the rooms in a logical order, so that each room has an exit to the next.
House book.
With the help of a book house, lovers of paper dolls develop not only their imagination, but also fine motor skills. The pages of such a house can be made of thick cardboard, and each of them can be pasted over with office paper or wallpaper and drawings can be applied to them.
On each spread of the book, a room is drawn in a certain theme: kitchen, hallway, bedroom, bathroom and children's room. A child can sit his puppet characters at the table, bathe them in the bathroom, put them to bed, and brush their teeth by inserting them into the slots in the appropriate places. Such a house can be placed on a corner, or you can simply flip through it.
House in a notebook.
Houses in notebooks are also convenient for playing with paper dolls. Each spread is also designed in a specific theme. Household items are cut out of colored paper and glued to a place previously drawn for them. Each door opens, on each shelf you can put necessary items in everyday life: clothes, shoes, towel, comb, Toothbrush, dishes, books, toys, etc.
House 3D.
Creating 3D houses for paper dolls is very simple. A4 sheets are folded in half and drawings are drawn on each half. For example, on the lower part there is a floor and a bed, and on the upper part there is a window and a closet. Placing the sheet of paper on the table with the bottom part will create the impression of a full-fledged room. To ensure that the structure holds up better and the sheets do not wrinkle, it is recommended to glue each of them onto thick cardboard. Each of the rooms is designed so that there is a transition from it to the second or a door to the street.
DIY plywood doll house, drawing, master class
Houses made of plywood, as a rule, last much longer than those made of paper or cardboard. First you need to make a drawing of the future house. We suggest using our drawing. All sizes are indicated in centimeters.
- plywood sheet 8 mm;
- pen or pencil;
- ruler;
- jigsaw;
- construction nails 1.2x20 mm;
- super-strong glue “Montazh”;
- white paint for facades;
- paint brush;
- sandpaper of different grain sizes;
- drill.
First of all, we transfer our drawings to plywood and cut out each detail with a jigsaw. To quickly assemble the house in the future, we recommend signing every detail.
On those parts where you decided to place windows, we mark them.
Since the parts are in the middle of the sheet, we first drill several holes and then cut them out with a jigsaw.
We carefully sand every detail.
We assemble the house according to the drawing. First we glue the parts, and then, for greater fixation, we drive in a pair of nails at each joint.
After the house is completely assembled, we paint it in White color. You can choose any other one.
How to make a house for dolls without glue, diagrams
This is the house we got from the drawing above.
A simple one-story house template.
How to make a house for a barbie doll
House made of paper for dolls, step by step with photos
In order for the house to hold up, and for furniture and the dolls themselves to be placed on its floors, we would recommend using cardboard as a base.
To create a house you will need:
- cardboard;
- stationery knife;
- ruler;
- pencil;
- glue Moment Crystal;
- pieces of wallpaper or other paper for wall decoration.
First of all, you will need to draw a drawing of your future home on a piece of cardboard. We used a cardboard blank measuring 110x74 cm.
We bend 2 side walls of the house. To make it more convenient to bend them, before the process itself, walk the blunt end of the scissors along the future bend lines.
From a piece of cardboard, cut out 2 rectangles measuring 50x30 cm and 25x27 cm. This will be the floor between the first and second floors and the partition between the rooms on the first floor. Glue it.
We cut out another blank for the floor and for the partition on the second floor, as well as blanks for the attic. Then we cut out the windows with a utility knife and cover the house from the middle with wallpaper or paper.
We wallpaper the outside of the house. The roof can also be covered with wallpaper, or you can, for example, cut cardboard into 3x31 cm strips and glue them overlapping. Window frames are also made from cardboard or ordinary colored paper according to the measurements of the cut window.
By making your own dollhouse for your daughter, you will give her a whole play world in which she can develop her imagination.