What you can make from wood with your own. How to make artificial trees

Decorative trees from artificial materials- This perfect option for decorating your home or office. They will fit perfectly into the design of any interior, creating a cozy atmosphere in the room. Such hand-made crafts do not require special conditions maintenance and careful care compared to living plants. From this article you will learn how to make artificial trees with your own hands in different versions.

Artificial pistachio tree

You will need:

Gypsum;
Pot;
Pistachio shells;
Gold spray paint;
Wire.

How to make a tree with your own hands from pistachio shells:

Using a drill, make a small hole in each shell;
We cut the wire into pieces 15-20 cm long and attach one shell to each of the pieces. Next, we twist the wires and get blanks;

We connect several leaves together by twisting the wire. Thus, a branch is obtained;
We make several branches and twist them together - we get a tree trunk;

We wrap the branches and stem part with FUM tape. Instead, you can take thread or rope;
Let's paint the craft;

Let’s prepare the base: prepare a pot suitable for the craft, fill it with plaster and insert our “golden” masterpiece into it;
Let's wait until the plaster dries. Finish the pot with paint;

Additionally, we decorate the finished craft with coins.

Similar ideas for hand-made crafts can be found in the article.

Master class on making decorative poplar

Such a beautiful “poplar” is a great decoration for your home or street.

Required materials:

Candle;
Glue;
Needle;
Matches;
Thin and thick wire;
Pot;
Gypsum or cement;
Gray and green threads;
Green plastic bottle;
Scissors.

Step-by-step master class with photos:

We use wire cutters to separate 3 identical pieces from the thick wire and connect them to each other by twisting them. We wrap the ends of the blanks on one side;
We dilute the fixing mixture, pour the solution into the pot, and place a “poplar” trunk with curved ends there. We are waiting for the mass to harden, and at this time we are making artificial branches;
Cutting squares from a bottle different sizes, cut out leaves from them. Heat a needle over the flame and make holes in the upper part;

We insert a thin wire into them, fold it in half, and twist it. We connect three branches into one and make several identical blanks;
Next on making crafts for home interior we take several blanks that consist of three branches and connect them together;

We close the wire part with gray threads and secure the ends with glue. We leave the lower part of the branch free, which we attach to the trunk;
Using the same method, we make the entire “poplar”, wrapping its stem part with gray thread;
To imitate grass, cut green threads of the same size and fold them in half. We lubricate the bend points with glue, and attach the workpieces to a cement or gypsum base.

Thus, we get beautiful artificial trees in pots that can easily stand both at home and on the street - they are not afraid of rain or bright sun rays.

Artificial home apple tree

It is advisable to place such decorative artificial trees only in indoors, because their flowers are made of yarn.

You will need:

Glue;
Wire cutters;
Cardboard;
Hook;
Scotch;
Wire;
Pencil;
Cement or plaster;
Scissors;
Brown and green fabric;
Pot;
Red and brown threads.

Stages of work:

Using wire cutters, we cut off six wire blanks of 30 cm, five of 25 cm, and twenty-two of 4 cm;
Attach 3 small ones to a large wire branch with tape. We make several preparations. The branches can be wrapped in fabric, such as velvet or fleece;

Cut strips 2 cm wide from brown fabric. We wrap the branch blanks (several pieces) with them, leaving 3 cm free at the bottom. We fix the ends of the material with glue;
We collect the blanks into a single “apple tree”. We cut a strip of 3 cm from the fabric, wrap it around the fabric and branches connected to each other. We also secure the fabric ends with glue;

To make the decorative apple tree further, we place it in a container with a narrow neck. If such containers cannot be found, then to fix the “plant”, pour cement or gypsum mortar into the container. We straighten the branches and begin to decorate our craft;
Now let’s cut leaves of different sizes from green material and scorch their edges over the flame, not bringing them too close to it so that they don’t spread;

We glue the leaves onto the branches and begin to create fruits, which are made from. Cut out 2 circles from cardboard, 3 cm in diameter. Draw a smaller circle inside and cut it out, we get 2 cardboard rings;
We connect them into a single piece and wrap a red thread around it using a hook. The yarn should completely “hide” the workpiece. We cut it from the outer edge, lay the thread Brown and with its help we tighten the resulting pompom;

We cut out leaves from green material and glue them onto a brown thread;
We hang the finished “fruits” on the branches. You can also decorate the pot as you wish.

Volumetric tree on the wall

This unique 3D decoration can be made with your own hands on the wall (and even on part of the ceiling) without any problems. To make it work a real masterpiece, it is not necessary to have knowledge of a sculptor or artist.

Important: This decor requires a lot of space.

You will need:

Master OK;
Bucket;
Marker and scissors;
Acrylic paints and brushes;
Scotch;
A bag of dry plaster;
A large sheet of cellophane film.

Progress:

Let's draw a contour mirror image on the cellophane film with a marker, and when we cut out the drawn middle, we should get a stencil;
We stick it on the wall with tape;
Pour water into a bucket and spread the plaster;
Using a trowel, carefully fill the empty stencil space;
Remove the film after the mixture has dried;
We apply several more layers of gypsum, making the last one round;
When the solution has dried thoroughly, paint the sculpture with acrylic-based paints.

You can choose a wide variety of palettes. A “natural” image would look great in the living room, or a fabulous tree, unusually painted, on the wall in a children’s room.

Decorative tree made from branches

To decorate the interior of your home, you can make large artificial trees with flowers.

Necessary materials:

Hot glue gun;
Twigs;
Sea pebbles;
Square flowerpot;
Decorative flowers (can be paper);
A piece of foam.

How to do decorative tree independently from regular branches:

We fill the bottom of the flowerpot with sea pebbles and put polystyrene foam on them, and insert the prepared branch into it;
Sprinkle it again with sea stones for good stability, insert moss on top;
Now we decorate the branch. For this decorative flowers by using glue gun glue it randomly to the branch;
After completing this procedure, such a decorative craft will rightfully serve as a decoration for your home or apartment.

On the Internet you can find many photos of trees made by yourself, choose the option that suits you and create your own masterpiece based on it. One more interesting idea To learn how to create an artificial tree, watch the video below.

Video: How to make an LED tree with your own hands

Wood is the most affordable and cheap material, which can be used by everyone at their own discretion. Our country has a huge number of forests, where you can find both dried trees and tree fragments. And even the seasons have no power over what you can make from wood with your own hands.

Wooden crafts can be small household items, as well as souvenirs and toys. Family or even children's crafts. In addition, wood can be used to make furniture, small buildings and much more. It all depends on what you want, how much time you have for these activities, and experience in woodworking. If you have a small carpentry machine and any tools, then questions of processing need not be raised, as well as questions about experience.

The simplest crafts can be household problems. For example, from processed sticks and branches you can make wonderful clothes hangers that will last a long time and look the way you want. You can also turn chair legs, rolling pins, mop handles, and much more from fairly thick branches or trunks of small trees. And if we talk about furniture here, then after processing a few more elements, you can assemble chairs and tables.

Problem modern furniture is that it is assembled mainly from processed secondary raw materials. This means that materials for furniture now mostly come from sawdust and shavings from the main production. And due to the high cost of wood materials for industrial production, furniture factories switch to cheaper raw materials, without monitoring the deterioration in product quality. If you make furniture with your own hands, even the most primitive one, and put your soul and experience into it, then it will last much longer than purchased furniture.

If you require any Additional materials, which cannot be found in the forest, for example, such as plywood, processed boards and the like, you can always buy them in specialized stores. In this case, the quality will increase even more, and you will have more room for creativity.

You can also build a house, barn, hut or gazebo from available wood materials without any problems. Treated sticks, branches and fragments of trees, trunks and anything else you can find are well suited for these buildings. The main thing is to first think about what you might need and try to do it small drawing to plan the build.

Creating crafts with the whole family or with children will also be a great activity. The main thing is to teach your family how to use tools. And things made together will live in your home for a long time, giving the warmth of the family hearth.

If you want to somehow diversify your leisure time, then we advise you, dear friends, to take up carpentry. This exciting activity will captivate you so much that time will simply slip away unnoticed, and in this case you will learn how to make all sorts of decorations for your home, cottage, garden and, of course, the yard with your own hands. In addition to all this, you will not be tormented by the eternal question of what to give to relatives, friends and work colleagues on their name days and other holidays. Moreover, there are a dime a dozen available materials for creativity; all the old trees located on your plot are at your disposal.

Even from ordinary-looking stumps and driftwood, if you use your imagination, you can create incredible masterpieces of art that will be admired by everyone without exception. So, we strongly recommend that you visit our article, which will provide you with 10 photos of ideas for beautiful and interesting DIY wood crafts for prepared beginners. They will serve as a shining example for you and an impetus for your own unusually cool works. Video from step by step wizard classes will complement and consolidate your acquired knowledge in the field of carpentry.

Original log feeder

If your 11-12 year old child was asked in a labor lesson homework at school or kindergarten, make a bird feeder, then you should like this wooden craft. You won’t spend a lot of time making it, and the result will delight you and surprise those around you. let's consider step by step instructions and we will understand how to make an interesting feeder from a log with your own hands.

You will need:

Log,
Chainsaw,
Jigsaw,
Semicircular chisel,
Hammer,
Chain - 1 m,
Carbine,
Mounting loop - 2 pcs.,
Self-tapping screws.

Progress:

Even a novice carpenter, through our master class, will be able to build a simple and original log feeder with his own hands. From the log we saw off two circles on both sides, of small thickness with a chainsaw.
We cut a wedge along the length of the log at approximately 45 degrees.
We take the wedge out of the log.
We make longitudinal and transverse cuts inside the log, not cutting about 5 centimeters to the outline.
Using a chisel and hammer, we hollow out the middle of our log. We smooth out the chips, making the inside of the log smooth.
From 2 sawn circles we cut out the side plugs. To do this, apply a circle to the log and inner contour We outline the size of the plug and cut it out with a jigsaw.
We insert plugs along the edges of our feeder and secure them with self-tapping screws.
Our craft in the form of a feeder is ready, now we’ll make fasteners for it.
To do this, we screw mounting loops into the upper part on the sides. We put a chain on them.
All that remains is to attach a carabiner to the chain and hang it on a tree.

Video: interesting DIY bird feeder

Frame made of tree branches

Photography is a preserved piece of happiness captured in different periods life. By making an unusual wooden photo frame with your own hands, you will add zest to the interior and surprise your guests. This frame will be especially relevant as a gift to loved ones. Even a novice carpenter can easily and quickly cope with such a simple task. The result will be amazing craft to the joy of everyone!

You will need:

Branches of various thicknesses,
Frame,
glue gun,
Jigsaw.

Progress:

Cut the branches into wheels, about 5 mm thick. The more varied the thickness of the branches, the more interesting the finished frame will look.
Now cover the frame with the resulting rings using glue, placing them in a chaotic order.
The edges may be jagged, but this will add a special charm to your DIY wood craft.

Swedish candle

This candle will be indispensable on any hike. You can cook food or heat water on it; it burns for a very long time. This useful craft, made with your own hands, will save you on any hike, travel, fishing, and even in the country. It's incredibly easy to make. Let's see step by step description and the principle of its implementation.

You will need:

A piece of log
Chainsaw,
Lighter fluid.

Progress:

In order to make this interesting craft from wood with your own hands for beginners at home, you will need to use a chainsaw to make 4 cuts intersecting in the center along the log. We do not make the cuts all the way to the end so that the structure does not fall apart, but slightly more than half the length.
Now pour lighter fluid into the middle.
Once you're on your hike, simply light the log in the center. The flame will be strong.
To ensure that oxygen reaches the fire site, take 2 branches, preferably raw ones, and place them parallel to each other. Now you can place dishes with food or water on them.

Video: master class on making a Swedish candle with your own hands

Owl made of wood

To decorate the garden or as an interesting craft for school, an owl made of wood will look good. It is quite simple to do with your own hands, so with your help, even a novice carpenter or schoolchild can easily cope with such an owl. Before we begin, let's see how to make an owl with your own hands in step-by-step instructions.

You will need:

Round cuts from trees of different diameters (1 large, 2 small and 1 medium),
Saw,
Self-tapping screws,
Cover with plastic bottle- 2 pcs.,
Felt pen,
Sackcloth,
Scissors,
Glue.

Progress:

A large saw cut will serve as the body of the owl.
On the flat side on top we fasten two small saw cuts with self-tapping screws. These will be the eyes.
We cut a medium-sized piece in half and attach it to the sides of the large cut. Sawed sides in different directions.
Make your own beak from a small piece of log, cut it out. Place from below between the eyes, attaching with a self-tapping screw.
We need to make ears from burlap, placing them above the eyes. Take a small piece and roll it into a tube, making one end sharp. Flatten it and use glue to glue it above one eye with the sharp part to the side. We make the second ear in the same way.
We make eyes from lids. We attach the lids to the logs for the eyes with a self-tapping screw, and fill in the pupils with a black felt-tip pen.
The owl is ready. It can be hung on the wall, since it has a flat side, or mounted on a tree branch in the garden, decorating it with another interesting DIY craft.

This interesting wooden stool will be an excellent decoration summer cottage, bathhouse or garden. You won’t spend a lot of effort and energy making it yourself. This stool is distinguished by its originality in manufacturing, since, by and large, it turns out by itself. You will need several steps at the beginning and end of the job. For beginners, this is just great way hone your skills.

You will need:

Log,
Ignition fluid,
Saw,
Round seat blank,
Metal brush,
Grinder,
Nails,
Hammer.

Progress:

We take a log and make 2 cuts, perpendicular to each other, along the log.
Pour lighter fluid into the middle and light it.
We wait until the fire itself makes legs for the stool and extinguishes it.
Using a metal brush, remove remaining coals and soot.
Then sand the surface of the stool with your own hands.
Nail the seat to the top of the stool.
The stool is ready! An excellent and useful wood craft for the whole family.

Video: master class on making a stool with your own hands

DIY swing for a child

If you want to make your child happy with a swing, you don’t have to buy one. You can make very beautiful and beautiful ones from wooden planks with your own hands. safe swing for small children. They are safe because there is protection from falling out on all sides in the form of crossbars. So, let's start the process of making our homemade interesting craft at home.

You will need:

Bar 3 × 4 × 37 cm - 11 pieces,
Board 4.5 ×1.5 ×37 cm,
Self-tapping screws,
Rope,
Hacksaw,
Pencil,
Ruler,
Drill,
Screwdriver.

Progress:

To make our wonderful craft from wood, we place two bars parallel to each other. We lay 6 boards on top with the same distance between them and fasten them with self-tapping screws.
We drill holes for attaching the rope on four sides in the corners.
Next, take a hacksaw and cut two pieces of 15 centimeters each from the block.
Then we drill holes in the center of the resulting blocks, so we will get the front pillars of our homemade craft.
We cut the seven-centimeter piece in half and drill it vertically.
We take a new block and place small blocks with holes along the edges. We drill holes in the block.
We repeat the same action with two more bars and three planks.
From the new block, we cut off two blocks, each 7.5 cm long, and drill vertical holes in them.
We take the rope and begin to assemble our swing. We pass two different ends along the sides of the seat so that the middle of the rope is under it. We do this on both sides of the swing.
We put 15 cm posts on the rope on the front part of the swing.
We put 3.5 cm posts on the back ropes. Then we put a block with holes on the back posts, so we will make the back wall of our swing with our own hands.
We put bars 7.5 cm long on the rear racks.
We install armrests. We put planks on the side ropes.
We put the two remaining drilled bars on the back ropes.
We put a board on the front ropes, which will serve as a side for the child.
Now you can hang the swing in any doorway, or in the corridor.

Video: interesting DIY wood craft

Wood cutting board

Each of us uses cutting boards in the kitchen, so I want to talk about how to make a board with your own hands for novice craftsmen. This interesting craft can be used in your kitchen, given to friends and relatives, or used as a basis for wood burning or other works.

You will need:

Board 20 × 70 × 40 mm,
Glue,
Clamp - 2 pcs.,
Plane,
Jigsaw,
Drill with drill,
Sandpaper,
Creosote.

Progress:

In order for the craft to turn out as required, the boards need to be glued together so that you get one wide board. To do this, we coat the sides of the boards with glue and, using two clamps, tightly tighten them together.
After the glue has dried, remove the clamps and process the board with a plane so that it becomes smooth and even.
Now draw the desired shape of the board and use a jigsaw to cut it out.
Drill a hole in the top of the board so that our craft can be hung in the future.
We process all sides of our board sandpaper so that it becomes perfectly smooth and without burrs.
After sanding, treat your board with creosote. Wait for it to dry.
The board, made from wood with your own hands in a short period of time, is ready for use!

Tic-tac-toe game made of wood

From wood you can create not only decorative and useful crafts, but you can also make a tic-tac-toe game with your own hands. Such interesting job will delight both adults and children with its unusual design. This game can occupy time at home and in the country.

You will need:

Sawed circle, diameter 20 - 25 cm,
Branch, 3 cm in diameter,
Cautery on wood,
Hacksaw,
Sandpaper.

Progress:

In order to make an interesting wooden craft with your own hands for beginners without any problems, you first need to cut the branch into circles up to 1 cm thick. We need 12 of these blanks.
Using sandpaper, sand all sides of the circles, as well as our playing field.
Now burn out a playing field of 3 × 3 cells on a large circle.
We need to burn 6 zeros and 6 crosses on small circles.
The craft is ready for play!

Snowman made of wood

Such an interesting and cute children's craft will become a real decoration. room interior on New Year 2018 or as a gift for friends - schoolchildren. Children can easily make such a creation with their own hands, they just need to devote a little time and effort to creativity, and also prepare several cuts of wood. Parental help and support, of course, will also not be superfluous for beginners. So let's get to work.

To create you will need:

a piece of wood, size 5 X 10 cm;
sandpaper;
white acrylic paint;
materials for decorating the Snowman: buttons, fabric and other things you like;
drill;
black marker;
pink paints;
paper;
compass;
orange polymer clay;
brush and sponge for applying paint.

Work process:

To make this craft, you will need to separate the work for children and adults. To begin with, a child of 11-12 years old will be able to freely draw a Snowman template on a piece of paper, and then cut it out in front of an adult.
Dad or grandfather, in turn, transfers these sketches onto the tree, tracing the lines with a black marker.
You will need to cut with a carpenter's tool fairy tale hero, and then sand all the unevenness and roughness.
After this, it is necessary to bring the Snowman closer to its natural color. To do this you will need snow-white acrylic paint. We cover the entire product with it and set aside time for drying.
We create the cheeks using pink paint. With a simple touch of a finger we apply blush to our craft.
We draw the eyes and mouth with a black marker.
Nose - we make carrots with our own hands from polymer clay. Entrust this part of the work to your child. After drying, attach it to the product universal glue. In the same way, attach the buttons to the Snowman’s body.
We make handles from tree branches, a hat from gray or brown colored cardboard, and a scarf from any piece of fabric. So our fun New Year's craft is ready, created with your own hands quickly and easily. For schoolchildren, you can come up with many similar products that they can create on their own at home. Perhaps this creativity will develop into your child’s real hobby, and subsequently into something more serious.

Vase for fresh flowers made of wood

Another one creative work for beginning carpenters, which will be suitable for schoolchildren aged 11-12 years, is a vase made from wooden saw cuts and a metal can. You can give this handmade craft to your mother, grandmother or friend. Look carefully at the photo and start making this interesting product.

To work you will need:

metal can;
universal glue;
small cuts of wood.

Manufacturing process:

Adults need to prepare small wooden cuts in advance.
Clean the metal jar from dust and dirt.
In a chaotic manner, we glue the wood cuts onto the prepared container, starting from the bottom to the top. In principle, there should be no gaps. They need to be masked with small circles natural material. That's all! Our interesting craft can become a gift, and a very valuable one, since it is made with your own hands.

Finally

So our article has come to its end, which provided you with some of the simplest and, moreover, interesting crafts made of wood with your own hands for beginner carpentry masters. The photo ideas and videos we offer are quite diverse and colorful, informative and meaningful. There is plenty of this material for beginners who want to expand their knowledge in this area. carved art. Give this information some time, study and put your knowledge into practice at home to create best work for beauty and benefit. By the way, if your children are also partial to this type of needlework, then feel free to include them in your creative company. Together, as they say, work is more fun. For the kids you can find some simple crafts, which they can create easily with their own hands. Fantasize, make your dreams come true, decorate everything around with your creations, delight yourself and your loved ones.

Things made with your own hands are distinguished by their beauty and decorativeness. They add a piece of warmth and comfort to the interior space. Wooden crafts for home and garden have an aesthetic appearance and allow you to reveal your inner potential. They help to decorate a residential interior and add a unique twist to your home. personal plot.

Both adults and children can make such products. Modern drawings wooden crafts will help you cope with the task. Good imagination and a little patience will allow you to get the desired result.

Original wood decor ideas

Since ancient times, natural solid wood has been widely used as finishing material. Beautiful texture and unusual coloring captivate the human imagination. Wood produces luxurious furniture and decorative items.

For creating unusual crafts. you can’t do without plywood, plywood, on the website https://faneramonolit.ru/katalog-fanery/fanera-1520-h-1520/ you can choose the size and place an order.

DIY wood crafts add a bit of warmth and simplicity to the environment. For example, a beautiful photo frame with carved patterns will be a wonderful decoration in the reception area for guests and loved ones. For this, you can use different types of tree crops. Special stains and impregnations will help add color and emphasize texture.

For a summer cottage original solution there will be animal figures. To do this you will need flat wooden elements. For example, thin saw cuts are used to create an owl.

The design consists of five main parts: head, torso and eyes, wings and tail. The head and body are made from round saw cuts. For the wings you will need bark or vine, previously fixed to each other.

Crafts made from wood cuts will become a real decoration for your personal plot. Thin pieces of wood are used to make multi-tiered racks and shelves, on which flower arrangements will later be placed. The surface of the array can be treated with sandpaper or left in its original form.

Wooden cuts are widely used as a base on which various decorative items are subsequently placed. For example, crafts in the form of a painting. There will be flat pebbles in the foreground. They will help imitate the torso and head of little people.

You can make beautiful clothes from gift paper. We draw other small elements using a thin marker.

Natural landscapes are made using the same technique. Marble or granite chips. Fine amber can be used for these purposes. Helps you record your results paintwork. The photo of wooden crafts shows exclusive decoration options. They will add elegance to the environment.

Master class on creating a three-dimensional wooden applique

The wooden applique is striking in its beauty. Modern technologies allow you to create complex drawing made from thin wood. We present to your attention detailed master class on creating appliques from natural solid wood.

Before starting the work process, you need to prepare the following tools and materials:

thin wood;
a simple pencil;
an image based on which we will create an application;
paper;
thin plywood;
wood glue;
impregnation. It will be needed to add color to the future craft.

The work process is divided into several stages:

Draw a future sketch on a piece of paper. We sign and number the weight of the part.
Next, we cut the entire drawing into separate parts;
Carefully cut off sharp corners.
We sand each part with sandpaper.
After the surface is prepared, each element of the application begins to be tinted. To do this, you need a thin brush and a water-based stain.
When all the parts have dried, you can begin making the wooden panel.
We cover each element with glue.
After this, we fix them on a sheet of plywood.
When all the elements are in place, we leave our panel until completely dry.
You can create a clear outline using a thin marker.