Electric heating panel. Types of infrared wall heaters and their use

Which company produces STEP heaters and where is the production located?
The Russian company Softterm LLC produces STEP infrared panels. The production is located in the city of Volzhsk.

Review of STEP infrared panels

What range of STEP electric heating panels does Softterm produce?
The plant produces the following range of heaters: STEP infrared heaters, STEP2 infrared heaters, STEP ceiling infrared heaters, STEP wood-look infrared heaters, STEP infrared floor heaters, STEP interior heaters, STEP infrared industrial heaters, infrared baseboard heaters operator STEP.

What are STEP heaters used for?
Infrared panels STEP is used for main or additional heating various rooms, such as apartment, office, country house, bathroom, various child care facilities. Also often used to prevent night frosts in greenhouses. Thanks to large assortment Heaters can be selected for almost any room.

Where in Moscow can you buy cheap energy-saving STEP panels?
The official website of our store “Warming You” presents STEP heaters, which are produced by the Softterm company. We also have a store located at Volgogradsky Prospekt 32, building 8, Technohall shopping center, floor 2, pavilion D-30, where you can see panels in action and buy them at a good price.

What range of STEP heaters is presented on your website?
Our website presents following models electric energy-saving panels STEP: infrared heater STEP 800 1.80/0.59 white and light wood, STEP 500 1.40/0.70 white and light wood, STEP 250 1.20/0.40 white and light wood, infrared rug STEP 100 0.5/0.5 and baseboard infrared heater STEP PN-200.

What information on STEP heaters can be found on your website?
On the website for each model, a detailed product card is compiled, which indicates all the characteristics of the heater, calculation of the heated area, provides an overview, you can also read and download installation instructions and a quality certificate. Also on our website you can find information about:

Are you interested in STEP interior heaters with a pattern? Is it possible to buy them?
Yes, there is such a possibility. But heaters with printing are sold to order. Order execution time is 2 weeks after prepayment.

What are the reviews for STEP infrared panels?
Reviews of STEP heaters are positive. They are reliable and durable, have an attractive appearance. As for their main function - heating, you should follow the recommendations for choosing power in relation to the area.

Customer Reviews

I bought two Ballu heaters for the dacha. They work great, heat up quickly and very well, and are not noisy. Delivered quickly the next day after the call. They told us everything and advised which one is better to take. I'm glad I bought from this store.

Wonderful write up about IR! All clear, grammatically correct speech, the pros and cons are objectively described. Having studied many different construction sites, this is the first time I have seen such a well-written text. This builds trust in the store. Whenever I choose, I will only buy from you. Please correct: “firstly,” a hyphen and a comma are needed. "differently" - hyphen. There are a few commas missing, check.

Good store. Close to the metro, I found the pavilion quickly. I was glad that there was a terminal for card payments. I bought an infrared (IR) PION 04 lux with a thermostat from Eberle for my father’s dacha for a chicken coop, he is happy.

And the cottages become not too comfortable. The central heating has not yet been started, but it is already noticeably cool outside. It is not surprising that many are trying to prepare for this phenomenon in advance, to acquire efficient heating atelier Panel heater is one of the most efficient devices in this market, which appeared relatively recently, but has already achieved high popularity. Panel construction due to the fact that it allows full use of the available space. When installed, the panel takes up minimal space, can be installed on the surface of a ceiling or wall, and is characterized by an impressive area, which increases the heat transfer coefficient.

Modern technologies

Economical panel heaters with low energy consumption are presented in several groups.

Carbon infrared models for wall installation

Heating is carried out internal element carbon based. The principle of operation is based on the production of infrared radiation, due to which thermal energy is transferred. To some extent, the effect of convection also takes place, the cold air of the room comes into contact with the heated surface of the device, naturally rises upward, and constant circulation occurs air masses. The mass of these devices is small, which simplifies installation.

An additional feature is that during operation, anions are generated, that is, negatively charged particles that improve the microclimate of the room and promote effective dust deposition.

The outer plane of the device reaches a maximum temperature of 80 degrees, that is, dust and oxygen are not burned, but you can get a burn if handled carelessly. If there are children at home, installation is carried out taking this feature into account. Modern modifications of this equipment are complemented by temperature regulators, thanks to which microclimate settings are adjusted and energy consumption is reduced. However, you can only see them on devices high power, from kilowatt.

Ceramic panel

Inside this device there is a ceramic heating plate, thanks to which an even distribution of thermal energy is achieved without significant heating of the surface. The peculiarity of the model is its significant thermal inertia, however, heating of the room is achieved in a fairly short time. The heat from these panels is quite soft, creating a pleasant microclimate. Some disadvantage lies in the heavy weight, which complicates installation.

Quartz panel

The body base is made of quartz sand, and inside there are several metal spirals. First, the contents of the panel heat up directly, it begins to accumulate heat and transfer it to the room. This feature explains the significant thermal inertia of the device; full heating occurs only after 25 minutes. However, this same feature explains that the panel will cool down gradually, and even when turned off, it will be able to heat the room.

Unfortunately, this is not the most a good option, if there are small children in the family, because the surface heats up to 95 degrees, so you will either have to install it at an inaccessible height, or take care of a protective screen.

An increase in indoor air temperature is achieved mainly due to convection, but there is also infrared radiation. In fact, this device can be classified as electric convectors, but improvement with quartz sand has made it possible to increase inertia and reduce the surface temperature, so that dust and oxygen are not burned.

Heating patterns

The most unusual appliances for the home. In fact, they are devices, but the outer surface is decorated with a drawing or photograph, so they look not like utilitarian devices, but like paintings.

Classic options

More traditional devices that have been known for several decades are also produced in the form of panels:

• Modular radiator. Structurally, this device is very similar to an analogue of water heating, but is intended for offline use. Most often, the device operates on a “dry” principle, that is, steel rod heaters are located inside.
• Panel type convector heater. From a design point of view, this is a fairly simple device, inside of which there is a heat exchanger, and outside there is a convection chamber, which also serves as a protection and forms the overall appearance of the equipment. The operating principle is entirely based on convection. Modern modifications are quite economical and also completely safe; the heating of the body reaches a maximum of 60 degrees, that is, it is impossible to get a burn. It should be remembered that achieving the set temperature in the room using this technique will take 20-30 minutes; you should not count on instantaneous operation.

Installation features

So that the device is not only effective, but also works long years, it is necessary to approach the installation responsibly:

• For installation, it is better to choose walls or ceilings (the junction of the wall and the floor slabs).
• When fixing, use mechanical methods, that is, dowels, screws, brackets. It is necessary to ensure that the strength of these elements is sufficient to easily support the weight of the heater.

Advantages of panels

Let us summarize the advantages that characterize all panel heaters, regardless of the type of heating element:

• Saving space in the room, since unused planes of walls and ceilings are used for installation;
• Stylish appearance;
• Manufacturability, energy saving;
• Easy to install;
• Opportunity further decoration and hiding under protective panels without compromising efficiency, if required by the interior of the room.

If we talk about which devices are better, then it will not be possible to give a clear answer to this question. It is necessary to consider each situation individually. For example, for a city apartment you should choose infrared option, optimal for continuous operation, demonstrating efficiency. For periodic use in the country or in country house, would be better suited convector

When using infrared heating panels, heat is transferred by thermal waves from the emitter and not the air, but the surfaces are heated. The radiant heat that infrared heating panels produce is similar to that coming from sun rays, open fire, Russian stove and fireplace. This is most favorable for a person, since a comfortable environment is created in the room.

Infrared heating panels

Advantages of infrared heating

• The rooms warm up quite well, you can warm them up to 40-50 degrees;
• temperature and humidity are maintained at the required level;
• dust-raising convective air currents are not created.

This type of heating can be installed different ways, you can make it either the main one or in addition to something else. Choose the most suitable look heating for a home is needed based on the available heating and other factors, such as: weather, materials from which the house is built, and so on. Let's take a closer look existing species infrared heating equipment. It can be installed in any room.

Infrared heating panels

The infrared heating panel can be either wall-mounted or built-in:

• Mounted. Most often with a metal painted body that heats up infrared emitter. They connect to sockets and can be placed either free-standing or attached to the walls, which is very convenient.
• Built-in. With a base of plasterboard, on which two layers of emitter and insulation are applied. On top of the sheet there is an IR emitter - a carbon conductive thread, on top of which there is a protective polymer coating, which fulfills and decorative function. Such panels are connected to a 220 V network.

Once again about the advantages of infrared panels, which reviews say:

• there is a thermostat that allows you to save energy and maintain the set mode;
• during heating, a minimum difference between the temperature of the ceiling and the floor is achieved;
• there are no pipes, no radiators, no heating boilers, and the panels themselves can be placed both on the walls and on the ceiling, the effect will be the same;
• on top of the panels you can put both tiles and gypsum cardboard, and simply cover them with wallpaper, thanks to the good heating temperature, reaching up to 50 degrees;
• quite a long shelf life, about 50 years;
• high fire safety;
• environmentally friendly.

When finishing walls with plasterboard wall heating will be especially convenient and priority as the main heating system. If there is any other type of heating, for example, solid or liquid fuel, such panels can serve as additional system or backup.

Of course, like any heating system, in addition to its advantages, there are also disadvantages:

• since infrared heating panels operate on electricity, which is not the cheapest now, this type of heating is a bit expensive;
• If you build heating panels into the wall, you will no longer be able to hammer nails into them and hang shelves or anything else.

Film infrared heating

Film infrared heating does not require heat transportation from the source, during which significant heat loss occurs. The convenience of the film is undeniable; it can be placed anywhere: on the floor, wall, ceiling. If you lay it on the ceiling, you can place it on 2/3 of its area, as a result, the heating of the room will occur more evenly. And the film itself can be draped with decorative materials.

Caution: but in no case should you install ceiling infrared heating under tension PVC ceilings or fabric ceilings.

Above the heating film, you first need to install a plasterboard frame. A decorative finishing must be without metal.

The system has quite a lot of advantages. Here are a few of them:

• only electricity is used for communications;
• there is no need to purchase boilers and use additional premises to install the system;
• the system is not subject to freezing, and there is no need for seasonal “preservation”;
• can be quickly and easily dismantled and reinstalled in another location;
• no need for after-sales service, very easy to use;
• the system operates silently and has no combustion products;
• does not deteriorate due to voltage surges in the network;
• quite durable, can last up to 50 years.

But, of course, there are also disadvantages: based on the height of the room and thermal insulation, from five to twenty watts per meter of area can be used. Get 100 square meters, approximately 1000 W per hour, 24 VKt per day and 720 VKt per month. Based on this, before installing this system, think carefully and weigh all the pros and cons.

Ceiling heating: infrared and suspended

• in those rooms where the ceiling height reaches three meters or more, they are very economical;
• you can warm up any specific part of the room;
• silent, waste-free, environmentally friendly.
• easy to install and operate.

Some brands produce cassette heaters that can be installed in suspended ceilings.

Flaws:

• it is not always possible to combine the design and style of a room with a suspended ceiling heater;
• Electricity consumption is the main disadvantage of these systems.

Which is better: floor or ceiling?

Where is it better to place it: on the ceiling or on the floor, or maybe on the walls? It is worth considering that warm air rises up, so Wall panels heating is less efficient.

With ceiling radiators, as well as those built into the floor, the floor will heat up, and warm air will rise up to the ceiling. Therefore, the choice of installation on the ceiling or floor is not particularly important, choose according to your taste. Now there are more modern options installations: baseboard heaters and wall panels-pictures. It is worth considering that it is the objects that heat up, not the air, therefore, a feeling of comfort is felt precisely in the proximity and direct influence of the heater.

Infrared electrical panel

Choosing heating devices, many of us prefer to get acquainted with the latest market innovations, which help us appreciate the benefits of comfort and coziness. A similar situation exists with electric thermal panels. They have already won the love of American and European buyers, and have now appeared on the Russian market.

There are several types of such devices. These are design radiators and infrared installations. How are they different from simple devices, where are they best used, and what features and benefits do they have? All this is discussed in the article.

Infrared heating devices

The purpose of infrared panels is the main or additional heating of residential, administrative, children's and commercial institutions. What are these devices?

This is an ordinary plasterboard sheet, on the back of which there are several layers of electrical insulation. A carbon thread is laid on top of them. It acts as a heater. A heating element It has additional protection. A decorative protective layer from polymers. Infrared thermal panels connect to a regular outlet with a voltage of 220 V.

What other technical features do the described devices have? The main one is the principle of heating the room. Unlike convectors, infrared thermal panels emit waves that heat not the air in the room, but the objects in it. The heat produced can be compared to the warmth of a night fire, wood-burning fireplace, Russian stove or the rays of the sun.

What advantages does this heating option provide?

• Firstly, with its help you can more rationally distribute heat flows throughout the room, while saving on electricity.
• Secondly, infrared electric heaters do not dry the air. It maintains the required threshold of humidity, so that a person feels more comfortable and there is no feeling of stuffiness.
• Thirdly, it is possible to minimize the occurrence of convection currents. Dust does not rise from the floor, its particles do not burn, so there is no characteristic odor in the room. This same circumstance completely eliminates the occurrence of drafts.

But the most important advantage of thermal panels is the creation of a special comfortable atmosphere in the cold season. Its basis is a temperature close to the temperature of the human body.

Energy Saving Technologies

Modern technologies provide high energy savings. Why does this happen? Similar devices connect to automatic regulator, which allows you to control the microclimate in a separate room.

The system equalizes the air temperature at floor and ceiling levels. Objects in the room gradually accumulate heat and only then release its excess to the space. Thanks to this, it is possible to warm up large rooms very quickly, creating comfortable warmth for a person. At the same time, energy savings are at least 40%.

Wide design possibilities

Heater with design

The use of the described devices allows you to completely abandon complex communication systems consisting of radiators and main pipes. They are used when installing traditional water heating systems. Simple electrical panels can be installed on any horizontal surface. And not only on the walls, but also on the ceilings, where heating systems also demonstrate their efficiency. At the same time, the quality of their work does not suffer in any way. The presence of a thermostat simplifies the management and operation of electrical infrared panels.

Note! The plasterboard base and the heating temperature of the slate circuit, which can only heat up to a maximum of 50 degrees, allow, if necessary, to further decorate the surface of the described devices. You can glue wallpaper on them, lay tiles and other decorative finishing materials.

Numerous studies have shown that infrared radiation is completely safe for human health. Its range corresponds to the range of thermal radiation of the human body and is 5–20 microns. Therefore, such heating is comfortably perceived by the human body. It was noticed that under the influence long waves blood circulation, muscle nutrition and oxygen supply to tissues improves. This improves your health and strengthens your immune system.

Thanks to this effect, infrared radiation is widely used in physiotherapy today. Namely, in complexes that make it possible to relax and get rid of the consequences of constant stress.

Note! When using infrared heating panels, it is possible to completely get rid of drafts, and the air in the room does not lose its humidity and always remains fresh. This has a beneficial effect on children's health. They suffer less from colds, and allergy sufferers do not experience the discomfort associated with dangerous reactions.

Panel safety

Infrared thermal panels are safe to use. And all because they are made from environmentally friendly pure materials. In addition, drywall does not burn and does not emit toxic substances when heated. Manufacturers claim that their products can be used as unattended primary heating.

The simplicity of the design does not impede its effectiveness. The service life of devices is practically unlimited. After all, in the production process of electrical panels only moisture resistant drywall and a heating element that creates a low temperature. Thanks to this, it cannot burn out like an electric heating element.

Where can electrical panels be used?

Infrared thermal panels have a wide range of applications. And all because they are not inferior either in functionality or efficiency to convectors and radiators. At the same time, their cost is affordable, and you can install thermal panels yourself, without the help of professional craftsmen.

In a city apartment with central heating, heating panels allow you to survive bad weather in the off-season without using oil radiators and others electrical installations. To appreciate the advantages of the described devices, it is enough to install thermal panels in the apartment, the total power of which is only 50% of the calculated power. By the way, the latter depends on the volume of the room.

In a country house, infrared panels can easily provide basic heating, but only where there are no interruptions in the supply of electricity. Another important condition- availability of serviceable and powerful wiring. Before installing the panels, it is advisable to install a separate cable, the power of which is sufficient to connect new generation electrical appliances.

Often, those who live outside the city permanently prefer to use solid fuel or gas boilers, but in addition to them, install electric infrared panels on the walls as a backup. This option allows you to organize some autonomy and leave the house without fear of it freezing in the cold due to the inability to refuel the solid fuel boiler again.

The built-in thermostat allows you to adjust the temperature in the range from 5 to 40 degrees. Thermal panels do not heat up more strongly, so they can be installed in children's rooms without fear that children will be injured by touching a hot surface.

How are thermal panels mounted and transported?

Installation in the house

What sizes can thermal panels have? They can fit to size plasterboard sheets. Therefore, if plasterboard is used to decorate the premises, you can immediately take care of both the heating of the room and its decoration.

Conventional thermal panels are mounted in the same way as sheets of drywall, on metal profiles. Their design is such that it is possible to perform both open and hidden installation. The main thing is to correctly remove and connect the electrical outlets. A special hole is provided for the output of contacts.

As a rule, bends are made and laid in a cable channel. It simultaneously provides open access to them and hides them from prying eyes.

Note! The back side of the panels must be insulated using a layer of insulation. Manufacturers pack thermal infrared panels in special packaging, which guarantees the safety of the installation during transportation.

Available options

On sale today you can find several options for thermal infrared panels:

1. Wall models.
2. Accumulator devices.
3. Window sill thermal panels.
4. Ceilings made in the “Amstrong” style.
5. Ceiling-mounted electrical panels.

The name contains the principle of using heating systems. You can also find electrical panels on sale, front side which resembles volcanic lava or natural stone granules. Domestic producers produce devices that look like paintings, complex art objects, unusual decorative panels, which fit perfectly into the concepts of modern styles.

Existing Alternatives

Electric convector EVUT ROSS

Not everyone today decides to use infrared panels. Electric and water thermal panels can serve as a simpler and more familiar alternative.

The former produce heat by converting electricity. Their use is appropriate when it is not possible to connect pipes with coolant to a separate room. Different power different sizes, different materials used in manufacturing - the choice is huge. Therefore, it will be easy to choose something specific just for yourself.

There are also electrical panels on sale that are a “symbiosis” of a radiator and a convector. They are usually equipped with two heating elements, one of which creates infrared heat, and the other provides convection currents.

Water thermal panels are ordinary panel radiators connected to common system heating or to the hot water system. The most popular device is a water heated towel rail. They are very easy to install and “live” in autonomous systems. In systems central heating they are vulnerable. Very often, water panels break down due to poor quality of the coolant, as well as due to surges in its pressure.

But the service life can be increased by connecting an adapter - an intermediate heat exchanger. It is connected to the panel in parallel.

Conclusion

New thermal panels help to effectively heat rooms through radiant heat. It heats not the air in the room, but objects. They accumulate heat and gradually release it to the space, creating a favorable microclimate. The thermostat installed on the devices allows you to accurately maintain the specified parameters and ensures the safe operation of the described devices.

The desire to save energy is an urgent need for humanity. There are fewer and fewer resources left on our planet, their cost is constantly rising, and the by-products of human activity are poisoning the environment. Energy saving is one of the ways to solve the problem. By choosing energy-saving heating for your home, you save resources, make a personal contribution to preserving the environment and create a comfortable microclimate in your home. There are several popular technologies, which make it possible to implement this complex program. We offer an overview of energy-saving heating systems for a private home.

Types of energy sources

Traditionally, several energy sources are used for heating:

Solid fuel – a tribute to traditions

For heating, wood, coal, peat briquettes, and pellets are used. Solid fuel boilers and stoves can hardly be called economical or environmentally friendly, but the use of new technologies can significantly reduce fuel consumption and, as a consequence, the amount of combustion products emitted into the atmosphere.

IN last years The number of sales of gas-generating furnaces and boilers is increasing. Their advantages are complete combustion of fuel and the use of pyrolysis gas as a heat source. Installing such a boiler saves energy resources. Buy these solid fuel boilers We recommend from trusted retailers.

The operating principle of a pyrolysis (gas generator) boiler is based on the use of pyrolysis gas, which is used as fuel. The wood in such a boiler does not burn, but smolders, due to which a portion of the fuel burns much longer than usual and produces more heat.

Liquid fuel is expensive, but popular

These are liquefied gas, diesel fuel, used oil, etc. It is always spent on heating the home a large number of liquid fuel, and no methods have yet been invented to significantly reduce consumption. This heating equipment requires careful maintenance, regular cleaning of soot and soot.

Most types of liquid fuel have another drawback - high cost. And yet, despite the obvious shortcomings, they are in second place in popularity after gas ones.

Liquid fuel boilers are convenient in cases where there is no gas pipeline near the house and you need to completely equip it independent system heating

Gas is available and cheap

In traditional gas boilers, fuel consumption is high, but condensing models have solved this problem. Their installation allows you to get maximum heat from minimum consumption gas The efficiency of condensing boilers can reach more than 100%. Many models famous brands can be transferred to work liquefied gas. To do this you just need to change the nozzle. Another energy-saving option is infrared gas heating.

Condensing boilers are a new word in the production of gas heating equipment. They consume fuel economically, are highly efficient, and are ideal for heating and hot water supply in private homes.

Read more about gas boilers.

Electricity is a convenient and safe source of heat

The only disadvantage of using electricity for heating is high price. However, this issue is being resolved: they are constantly developing electrical systems heating systems that consume a relatively small amount of energy and provide efficient heating. Such systems include film heaters and infrared radiators.

Warm floors are most often used as an additional or alternative heating system for a home. The advantage of this type of heating is that the air is heated at the level of human height, i.e. the principle “feet warm, head cold” is implemented

Heat pumps – economical and environmentally friendly installations

The systems operate on the principle of converting the thermal energy of the earth or air. In private homes the first heat pumps they began to be installed back in the 80s of the twentieth century, but at that time only very wealthy people could afford them.

Every year the cost of installations becomes lower and lower, and in many countries they have become very popular. Thus, in Sweden, heat pumps heat about 70% of all buildings. Some countries are even developing building codes and rules obliging developers to install geothermal and air systems for heating.

Heat pumps are installed by residents of the USA, Japan, Sweden and others European countries. Some craftsmen assemble them with their own hands. This great way get energy to heat your home and save environment

Solar systems are a promising source of energy

Solar thermal systems transform radiant solar energy for heating and hot water supply. Today there are several types of systems that use solar panels, collectors. They differ in cost, production complexity, and ease of use.

Every year there are more and more new developments, opportunities solar systems are expanding, and prices for structures are falling. While it is unprofitable to install them for large industrial buildings, they are quite suitable for heating and hot water supply of a private home.

Solar thermal systems require only initial costs - purchase and installation. Once installed and configured, they work autonomously. Solar energy is used for heating

Thermal panels – energy-saving heating

Among energy-saving heating systems, thermal panels are becoming especially popular. Their advantages are economical energy consumption, functionality, and ease of use. The heating element consumes 50 Watts of electricity to warm up per 1 m², while traditional electric heating systems consume at least 100 Watts per 1 m².

A special heat-accumulating coating is applied to the back side of the energy-saving panel, due to which the surface heats up to 90 degrees and actively releases heat. Heating of the room occurs due to convection. The panels are absolutely reliable and safe. They can be installed in nurseries, game rooms, schools, hospitals, private homes, offices. They are adapted to voltage fluctuations in the electrical network and are not afraid of water and dust.

An additional “bonus” is the stylish appearance. The devices fit into any design. Installation is not difficult; all necessary fasteners are supplied with the panels. From the first minutes of turning on the device, you can feel the warmth. In addition to the air, the walls warm up. The only negative is that using panels is unprofitable in the off-season, when you only need to slightly heat the room.

Monolithic quartz modules

This heating method has no analogues. It was invented by S. Sargsyan. The operating principle of thermal electric heaters is based on the ability of quartz sand to accumulate and release heat well. The devices continue to heat the air in the room even after the power is turned off. Systems with monolithic quartz electric heating modules are reliable, easy to use, and do not require special care and maintenance.

The heating element in the module is completely protected from any external influences. Thanks to this, the heating system can be installed in premises of any purpose. The service life is not limited. Temperature regulation is carried out automatically. The devices are fireproof and environmentally friendly.

Cost savings when using electric heating modules are about 50%. This became possible because the devices do not operate 24 hours a day, but only 3-12. The time during which the module consumes electricity depends on the degree of thermal insulation of the room where it is installed. The higher the heat loss, the greater the energy consumption. Heating of this type is used in private homes, offices, shops, and hotels.

Monolithic quartz electric heating modules do not make noise during operation, do not burn air, and do not raise dust. The heating element is embedded in the structure and is not afraid of any external influences

PLEN is a worthy alternative

Film radiant electric heaters are one of the most interesting developments in the field of energy-saving heating technologies. economical, effective and quite capable of replacing traditional types heating. The heaters are placed in a special heat-resistant film. PLEN is mounted on the ceiling.

The film radiant electric heater is a complete structure consisting of power cables, heaters, a foil screen and high-strength film

The principle of operation of such a system

Infrared radiation heats the floor and objects in the rooms, and they, in turn, give off heat to the air. Thus, the floor and furniture also play the role of additional heaters. Thereby heating system consumes less electricity and gives maximum results.

For maintaining desired temperature Automation responds - temperature sensors and thermostat. The systems are electrical and fireproof, do not dry out the indoor air, and operate silently. Since heating occurs primarily by radiation and to a lesser extent by convection, PLENs do not contribute to the spread of dust. The systems are very hygienic.

Another important advantage is the absence of the release of toxic combustion products. Systems do not need special care, harmless to human health, do not poison the environment. With ceiling infrared heating the warmest zone is at the level of the legs and torso of a person, which allows you to achieve the most comfortable temperature regime. The service life of the system can be 50 years.

An infrared heater does approximately 10% of the work of heating a room. 90% comes from the floor and large furniture. They accumulate and release heat, thus becoming part of the heating system

What makes PLEN so profitable?

The buyer incurs the greatest expenses at the time of purchasing a film heater. The design is easy to install, and if desired, you can install it yourself. This allows you to save on workers. The system does not need maintenance. Its design is simple, therefore durable and reliable. It pays for itself in about 2 years and can serve for decades.

Its biggest advantage is significant savings on electricity. The heater quickly warms up the room and then simply maintains the set temperature. temperature regime. If necessary, it can be easily removed and mounted in another room, which is very convenient and beneficial in case of moving.

Infrared radiation has a positive effect on human health and activates the body's defenses. By installing PLEN, the owner of the house, in addition to heating, additionally receives a real physiotherapy room

Training film on editing PLEN

The video shows all the stages of installing a film heater:

The importance of reducing heat loss

The purpose of the review of energy-saving heating systems for a private home is to help readers choose the most profitable way heating the home. New systems appear every year, and information about them can save many people significant amounts of money. But even the most advanced energy-saving heating technologies will be useless if you do not take care of home insulation in a timely manner.

Good double-glazed windows and insulated doors will help reduce heat loss by 10-20%, a high-quality heat insulator - up to 50%, and a heat recuperator for exhaust air - up to 30%. By insulating your house and installing an energy-saving heating system, you will achieve maximum results and you will pay a minimum for heat.

Return