Date: 05/13/2017
Many people who decide to renovate their apartment or house with my own hands, they believe that high-quality wallpapering will not be difficult for them. Yes, to some extent this finishing material quite practical, but only on flat sections of walls, which cannot be said about corners. How to glue wallpaper in corners? This is the question faced by people who start repairs without professional help.
It is in the corners that gluing is a labor-intensive process, which makes it difficult and calls into question the quick completion of the repair. So you should approach this issue with all seriousness and carefully study all the nuances of such an operation, because poor wallpapering in the corners can generally ruin the whole look.
How to glue wallpaper in corners
Wallpaper is and remains the most popular finishing material for any type of premises, be it a room in an apartment, an office, or a beauty salon. The quality of wallpaper varies, and can be found for absolutely every taste, color scheme and cost.
Sometimes cheap, nondescript wallpaper transforms a room so much that it seems almost worse than expensive wallpaper, that is, now on the construction market the range of wallpaper is different, and there is a high-quality and at the same time cheap material- two in one.
Today, to hang wallpaper you do not need to have professional skills, but you need to know the gluing system. The walls must first be leveled around the perimeter, in the corners, and this is where problems begin for non-professionals.
Wallpapering in the corner
It is not recommended to glue a single strip of material. In the presence of uneven corners the strip lies in folds and does not meet the other. We recommend leaving an overhang at the corner of 1.5 or 2 centimeters and then the strip will lie flat. Selecting from high density wallpaper, use a plumb line. Glue a piece of cut wallpaper with a small overlap onto the adjacent wall so that it is as vertical as possible.
If there are switches or sockets in corners or close to them, before gluing and any construction work Turn off the power supply and remove the covers. Glue the material completely onto the convex parts, and only then carefully cut it out, making small cuts.
When starting to cover the wall near the door, it is important to know that the strip of wallpaper must be cut vertically to the beginning of the frame. It is then attached along the edge of the wall. Wallpaper protrusions should be cut off.
Non-woven wallpaper - how to glue wallpaper in the corner
Preparing the walls
Wallpapering should be done in accordance with existing technology, observing the sequence of processes, which concerns not only the corners, but the entire procedure for covering walls with wallpaper.
List of the sequence of finishing work stages for wallpapering:
- Clean walls from oil paint;
- If there is whitewash, remove it;
- Remove deep irregularities, especially in corners;
- Carry out the preparatory work procedure. Surface primer.
It is better to prime the surface by professional means which are sold in containers different prices, but you can also prime with diluted glue, but it is not particularly recommended. A special roller or wide brush will help you prime the surface. Due to the fact that pasting in the corners is especially difficult, there can be such a nuisance as displacement of the pattern. On the walls, the geometry of the pattern has been preserved, but in the corners everything has gone wrong and now spoils the overall background. Therefore, take the most responsible approach to inspecting the corners to see if there are any irregularities and eliminate them if there are any.
Preparing walls for wallpapering
Stage of alignment of wall corners
After you have covered all the flat surfaces of the walls, you have to move on to the corners. Now inspect, and if you notice any unevenness, proceed to sanding - carefully filling it with putty. After the putty has completely dried, the entire surface must be cleaned. sandpaper to achieve ideal smooth surface so that the wallpaper does not come off in the future.
Now the corners need to be coated with primer. If you do not have the skill of puttying, then there is a way out, just buy wallpaper of the same type, or with a simple pattern that does not require further joining (paper). So part of the question of how to glue wallpaper in the corners can be considered solved.
Stage of applying glue in the corners
After leveling the surfaces in the corners, we proceed to applying glue; it must be distributed with all care along the height of the walls, and most conscientiously in the corners, because in these places the wallpaper most often peels off. We distribute the glue along the entire length with a roller and in hard-to-reach places with a brush.
Applying glue to wallpaper and walls
How to glue wallpaper in corners
Finally we come to the important part of the issue of gluing in the corners. Pros of this business recommend gluing a piece of canvas in the corners, even if the whole piece is perfectly straight. This can be explained by the fact that there is a high probability of distortions occurring in the corners, and the subsequent sheet will not fit together at all, and after drying, folds can be found. Room decoration professionals advise cutting the wallpaper so that the side extends 50 mm onto the next wall. Below is a picture of wallpapering in the outer and inner corners.
Did you know: a nuisance for beginners in this business is the curvature of the gluing areas. The eye cannot always detect such a surface defect, so a list of tools will come to the rescue: a plumb line and a building level. They are used to measure corners before wallpapering.
If there is a very serious “blockage”, then it is better to come up with a method of “cutting” in these places. This method is used for thick wallpaper - vinyl.
According to this method, the material is passed 50 mm onto the adjacent wall around the corner, and the next sheet is glued overlapping.
The next step: in the middle of the corner, a vertical cut is made in the middle of the corner using a special construction knife under a level or ruler in the direction from top to bottom through two layers of wallpaper.
Scheme for wallpapering in corners
During the entire process, the iron ruler must fit tightly to the corner and be pressed firmly so that there is not the slightest movement. Otherwise, a shift along the cut surface is ensured. Experts recommend using a long metal ruler to building level, which has more weight and produces wonderful abs that interfere with movement.
Glue wallpaper in the inner corners
To avoid the appearance of folds in the inner corners, these canvases should be divided into two parts before wallpapering. The first step is to paste the material to the corner of the room, then you need to accurately measure the distance from the last pasted piece of wallpaper to the corner bend, and add the connecting 10-12 mm to the resulting figure. Next, one prepared part is glued to the wall with the cut edge on adjacent angle. Adjust the edges as usual, be it top or bottom.
Now, using a brush or rag, press the wallpaper into the inner corner of the room. If unevenness occurs, such as warping of the material, then take a special knife and make cuts, while pressing the wallpaper into the wall. Then glue the next part with an overlap onto the pasted material, pressing it firmly against the wall with a brush. Finally, cut off the remaining parts at the bend using the same knife.
Tip: If your corner inner and middle parts have small bulges, and the bottom is tucked slightly inward, it is better to press the cut edges overlapping. When covering a room with thick (vinyl) wallpaper, the best option is to use glue with transparent base at joints, this glue is suitable for dense materials.
Methodology for pasting the outer corners of a room
Gluing the outer corners of the room requires calculating the length of the wallpaper in advance, and so that the canvas is not only enough, but it can go around the convex part of the wall from 21 to 25 mm. When gluing thick quality wallpaper, be sure to make light cuts to ensure smooth laying of the strip.
How to glue wallpaper in corners correctly
So, on thick wallpaper, using an iron ruler and scissors, cut off excess strips of material, leaving a minimum edge, the visibility of which will not be visible under the subsequent canvas. The next strip is glued on top of everything with an overlap of 5-6 mm. If you choose smooth wallpaper, then immediately iron it with a roller, but with a convex pattern, voluminous ones can be lightly rubbed with a rag.
Wallpapering with a pattern in the corners
The vertical pattern of the wallpaper makes it difficult to paste in the corners, because distortion is especially noticeable in these places. A pattern with a horizontal position is no exception; for example, after gluing it can become completely skewed. To avoid such incidents, it is necessary to make a small overlap on the wall next door and hide the joint at the top of the corner.
Advice: the difficulty of wallpapering corners is to follow the rule - the edge should be plumb and lay flat, and the other should be trimmed along the edge of the corner.
A non-professional will not be able to hang wallpaper without shifting the pattern without experience. The main thing is to make it less noticeable, using the instructions provided above.
Repairing an apartment, house or office takes a lot of time and effort, as well as money if you decide to turn to hired workers for help. But thanks to the instructions given to you above and strict adherence to them, you will be able to begin self-finishing, paying attention and time to study wallpapering in the corners. Pay attention to the presence of defects, whether your walls are smooth, and check preparatory work to eliminate irregularities. In addition, radiators and pipes often pass through the corners, interfering with the gluing process, making repairs a hassle.
If you approach this task responsibly, taking into account all the recommendations and rules, then you will find quite a wonderful result, no worse than if the gluing was carried out by a professional team of craftsmen. By doing the finishing work yourself, you will significantly save money. Good luck, and good completion renovations in your home!
How to glue wallpaper in corners - video review
Planned or redecorating the apartment can hardly do without this labor-intensive process like decorating walls with wallpaper. However, today non-woven wallpaper is often used for wall decoration, which has some advantages over its paper counterparts.
For example, such wallpaper options can be subjected to wet cleaning, they hide imperfections wonderfully uneven walls And long time keep their attractive design. In addition, non-woven wallpaper is quite easy to fix on the wall, because it is a very easy-to-use finishing material that does not form vertical, horizontal folds or bubbles. Traditional external and internal corners that are difficult to finish can be decorated with non-woven material without experiencing any serious difficulties. To do this, you just need to take into account some nuances.
The easiest way to have a beautiful front lawn
Of course you saw perfect lawn in the cinema, on the alley, and perhaps on the neighbor’s lawn. Those who have ever tried to grow a green area on their site will no doubt say that it is a huge amount of work. The lawn requires careful planting, care, fertilization, and watering. However, only inexperienced gardeners think this way; professionals have long known about the innovative product - liquid lawn AquaGrazz.
To decorate the corners of a room with non-woven wallpaper, do not try to use whole piece wallpaper, in order to decorate both walls that meet in the corner. In this case, the wallpaper will “behave” almost with a guarantee, and the resulting folds will have to be trimmed, which will negatively affect the appearance of the wall. However, even if this can be avoided, the crooked angle (unfortunately, this standard practice for domestic builders) may affect the further decoration of the apartment with wallpaper. After all, non-woven wallpaper is applied to the walls “joint to joint”, accordingly, the distortion made when passing the corner will force all other sheets of material to be trimmed.
Decorating the corners of the room with non-woven wallpaper
Correct wallpapering in the corners with wallpaper made of non-woven cellulose material is as follows:
If everything was done without errors, then the joint between the strips of non-woven wallpaper will be difficult to notice; it will need to be treated with a roller or rag.
External corner
Features of wallpapering external corners of a room
External corners in rooms are much less common than internal ones, but they do happen. The technology for applying non-woven wallpaper in this case is almost identical to the passage of internal corners.
At the first stage, we engage in geometric research:
- We measure the distance - from the edge of the last pasted strip to the outer corner - and prepare the next strip of wallpaper so that, after fixing it on the wall, it “wraps” around the corner by no more than 50 millimeters.
- We determine the point of the wrapped strip closest to the corner, it is from this point that we will begin gluing a new strip of wallpaper.
Accordingly, measures are taken to apply a vertical stripe and remove wallpaper residues.
By the way, if the outer corner is even, as evidenced not only by visual inspection, but also checked using a plumb line, the use of one strip of wallpaper is allowed. However, it must be taken into account that possible discrepancies should not exceed 5 millimeters.
Paper wallpaper
Paper wallpaper is still popular in finishing works inside the apartment. This is due to their very affordable price and sticker method. It is worth noting that paper wallpaper are not able to hide serious defects in wall surfaces and crooked corners. The method of fixing paper wallpaper on the walls is not too different from a similar technology with non-woven wallpaper.
The simplest option involves sticking this finishing material “overlapping”. In other words, a strip of wallpaper is glued in the corner with a slight overlap (1-1.5 centimeters) onto the adjacent wall, and the next strip is glued directly in the corner itself. What distinguishes this method is its efficiency, but visual effect leaves much to be desired.
Paper wallpaper - application features
The second method of wallpapering corners is suitable even for slightly “cluttered” walls that form a corner. The initial stage is completely consistent with the previous method, the only difference is that the overlap on the adjacent surface is slightly larger. The next strip of wallpaper is also glued “overlapping”, but its side farthest from the corner should be oriented along the vertical strip applied using a plumb line. The canvas should lie with an overlap of 2 centimeters, while having a common border with the adjacent wall. Then along the drawn vertical lines special knife Both layers of finishing material are cut through, and after removing its remains, you can begin further design of the apartment walls. Don't forget to treat the cut line with a special roller.
As you can see, the method of gluing paper wallpaper in the corners is very similar to the method of fixing non-woven wallpaper.
Finishing external corners with paper wallpaper
External angles occur as window slopes, decorative partitions from plasterboard, etc. In any case, the geometry of such a corner is extremely important, because such a corner, unlike the internal one, is constantly in sight. Therefore, possible defects in the outer corner should be eliminated in advance and only after that proceed with wallpapering.
Technology for gluing wallpaper in corners
The technology for gluing wallpaper on the outer corner is very similar to the second method of fixing wallpaper on the inner corner. However, the “overlap” on the adjacent wall should not exceed 5 centimeters, this is due to the fact that a large overlap with an uneven wall surface will be difficult to level. Depending on the quality of the wall and wallpaper, folds may appear; they are eliminated using special horizontal cuts on the canvas. The next strip of wallpaper is glued close to the corner, but its far edge should run along a pre-defined vertical strip. Next, using a paint spatula, a building level or a metal ruler, press the center of the overlap and cut both panels with a wallpaper knife. After the remnants of the wallpaper have been removed, they need to be glued and processed with a roller. In this case, the docking connection will be shifted a few millimeters from the corner itself, but this is how it should be. Otherwise, there is a risk of tearing the wallpaper as a result of careless movement.
Small tricks when working with wallpaper
The finishing material is of key importance when working with internal and external corners:
- You should not apply glue to paper wallpaper in advance; there is a very high chance that it will become soaked through and tear in your hands. However, this type of wallpaper does not require trimming when passing corners because due to the fact that the wallpaper is very thin, it is enough to iron the joints with a dry rag or roller.
- Vinyl wallpaper, on the contrary, is better to treat it with glue in advance and let it absorb it. Vinyl wallpaper is a fairly dense material, and with advance prepared the canvases will be easier to work with.
- There is no need to apply glue to non-woven wallpaper; it is applied only to the wall.
- The general rule for all types of wallpaper is that they should be glued in rooms where there are no drafts and where air conditioners and heaters do not work.
Do not forget that the walls must be treated with a primer before wallpapering. In addition, the glue must match the type of finishing material such as wallpaper. Companies specializing in production various types wallpaper, indicate in the accompanying documents the most suitable adhesive mixtures for their products.
Required tools and materials
Tools and materials for wallpapering an apartment
In order for the decoration of an apartment to go quickly and successfully with wallpaper, it is advisable to take care in advance of the availability of the following tools and materials:
- dry rags or sponge to remove excess glue;
- construction hair dryer;
- brush;
- vacuum cleaner;
- stepladder or scaffolding.
Results
Wallpaper, despite all its shortcomings, as a type of finishing material used for interior design apartments are one of the most popular, this is due not only to their price, but also to the fact that they can be glued without the help of third-party specialists.
The technology of wallpapering corners is complex only at first glance. Wallpapering walls will help create a cozy kitchen. homely atmosphere. Thanks to modern developments, this finishing material, and in particular non-woven wallpaper, can compete with plastic in strength and durability. At the same time, they are more environmentally friendly, allow air to circulate and are easier to work with. The only thing you will have to tinker with is to figure out how to glue the wallpaper in the corners.
Choosing suitable wallpaper for the kitchen
Correctly selected wallpaper is already half the success. By saving on quality, you can greatly lose in durability, and in a year or two you will have to do repairs again.
Non-woven wallpaper is one of the best options for kitchen
Non-woven bases are more convenient when it becomes necessary to change the wallpaper. To do this, you just need to remove the vinyl layer, and the new canvas can be glued to the old finish.
Let's look at what types of wallpaper there are, and whether they can be used to cover the kitchen:
- Paper wallpaper- not a suitable option for the kitchen. In conditions of temperature changes, high humidity or dryness, the paper deteriorates and the design fades. Having decorated the kitchen with paper wallpaper, in such a microclimate one cannot count on its long service life.
- Vinyl on paper based – more durable material. They can be washed and glued for painting. Such wallpapers do not fade in the sun and are resistant to moisture. The gluing technology is the same as for paper ones. But since vinyl makes the canvas heavier, glue is chosen for heavy wallpaper. It should also be kept in mind that not every vinyl covering breathable.
- Vinyl on non-woven base– are highly durable thanks to non-woven fabric as a lining. There is no need to be afraid that they will tear or shrink. This type of wallpaper is glued end to end. Due to the fact that the glue is applied only to the wall, energy and time are saved during the repair process.
- Non-woven wallpaper– thanks to their dense structure, they perfectly mask unevenness and cracks. They allow air to pass through well, without turning the kitchen into a “greenhouse”. Perfectly suitable as a base for painting. During the gluing process they do not stretch or tear. Easy to care for, they can be washed and vacuumed.
Required materials and tools
To properly hang wallpaper and not be caught off guard by the lack of necessary tools, before repairing, check that you have everything you need.
You will need:
- wallpaper,
- glue,
- assembly knife,
- scissors,
- putty knife,
- plaster,
- building level,
- plumb line,
- sponge,
- rubber roller,
- ruler,
- pencil,
- brush.
Pencil – essential auxiliary tool for wallpapering corners
Subtleties of wallpapering corners
Wallpapering is a simple matter, but it also has its own subtleties. As a rule, difficulties arise if you do not know how to glue wallpaper in the corners. When at least one corner turns out to be crooked, as it is glued along the wall, an increasing distortion of the canvas will be observed relative to the surface of the floor and kitchen windows or ceiling.
You should not rely on the doorway as the starting point for wallpapering the walls. Check with a plumb line that it is truly perpendicular to the floor. There is a high probability that the frames are also installed with an error, which will lead to misalignment and the corner will be swollen.
The tradition is to start decorating walls with wallpaper from door and window openings originates from the need to glue overlapping paper wallpaper so that the latter is less noticeable. With the advent of vinyl and non-woven materials, such a need has disappeared, since the fabric is glued end-to-end.
Smooth corners are much easier to paste than curved corners.
For large irregularities, some tricks will help
Before starting to work with wallpaper, it would be correct to level each corner with plaster using a building level. Minor unevenness can be dealt with by slightly overlapping or cutting off an extra piece of fabric.
Trimming wallpaper in corners (video)
Wallpapering interior corners
A corner properly wallpapered does not wrinkle, the edges of the canvases do not diverge, forming a gap. To achieve such an accurate repair, they resort to some tricks.
For this:
- A layer of glue is applied to the wall. If the wallpaper is non-woven, you do not need to apply glue to the back side.
- The edge of the canvas is placed on the adjacent wall with an allowance of 1-2 cm.
- The wallpaper is pressed tightly against the wall using a sponge. If the canvas wrinkles, make cuts with scissors towards the swellings and straighten the material.
- After this, they begin to cut the canvas, which will lie in the corner from above. Using a ruler and a pencil, on the reverse side, lay out in a mirror image the overlap that went onto the adjacent wall, and cut off this excess.
- The cut fabric is glued so that the cut edge ends up exactly in the corner.
Detailed instructions for wallpapering internal corners
Wallpapering external corners
Often the kitchen design is designed in such a way that doorways It is necessary to paste over the protruding outer corner as well.
Wallpapering corners - not an easy task with large curvature of walls
For this:
- Take measurements from the top and bottom starting points for the wallpaper to the corner plus 3 cm to wrap it.
- Cut the wallpaper to the required dimensions.
- Apply glue to the walls with a brush.
- The edges are pressed tightly against the wall, making cuts where wrinkles form.
- If the pasting is done with non-woven material, the top layer is cut along the corner and a narrow strip is carefully removed.
- A new sheet on the adjacent wall on the other side of the corner is glued over the non-woven edge.
- Go over the joints with a rubber roller.
That's all the tricks on how to glue wallpaper in corners. Knowing these subtleties, there should be no difficulties with kitchen design. Such simple solutions will help create cozy interior kitchens.
How to glue wallpaper in corners (video)
Usage roll materials for surface cladding - this is a popular and sought-after solution that allows you to achieve high-quality results in a short time. But the finishing technology has some nuances. It is especially difficult to glue wallpaper in the corners: the resulting coating must be free of distortions and defects. Most suitable way is selected depending on the situation.
Existing varieties have certain order wall cladding, which allows you to achieve the best result.
Vinyl
The technology for working with this option is not very complicated if you perform all the processes correctly.
Step-by-step instruction:
- The place is being prepared. For convenience, the material is rolled out onto a clean floor or a table of suitable size, pattern down.
- Trimming is carried out taking into account an allowance of 100 mm. If the coating has a complex pattern, then the pattern specified by the manufacturer is used.
- The canvas is treated with glue and folded in half for better penetration.
- The composition is applied to the wall, covering areas that extend beyond the width of the roll.
- The strip is laid on the base and smoothed out well.
- It is taken into account that standard and meter vinyl wallpapers on a non-woven base you can only glue them end-to-end; an overlap will ruin the look.
The vinyl layer on the canvas is quite durable, so the wallpaper can be safely smoothed with a wallpaper spatula without fear of damaging its integrity On a note! If you have no experience and need to adjust a complex pattern, it is better to prepare: for this, the stripes are placed on a horizontal surface, aligned with each other, and the size of the required adjustment is noted.
Paper
Gluing this variety is rarely accompanied by difficulties. For the process, you can use any glue, including homemade glue.
Algorithm of actions:
- According to the width of the roll, markings are carried out using a level and plumb line.
- The material blooms into strips, depending on the pattern. For this, a technology similar to working with the vinyl version is used.
- The canvases are well coated with the prepared composition and rolled up.
- After surface treatment, pasting is carried out. The excess is trimmed.
- Most often, paper products are placed overlapping, but strips can also be joined. It is taken into account that after drying the canvas will become narrower, so a special paper tape is placed under the seams. This rule also applies to other types of wallpaper.
It is impossible to tighten the fabric at the joint by force; the connection is aligned exclusively with the help of a rubber roller All processes, especially smoothing, are carried out with care, because even multi-layer products are very easily damaged.
Non-woven
To glue this variety, use special option glue, since the material is quite heavy. The preparation of the binder composition is carried out strictly according to the instructions and is applied only to the wall.
Process diagram:
It is important to properly saturate the base: do not leave dry areas. Places beyond the width of the canvas are necessarily affected.
Advice! To speed up the process, it is better to apply the composition with a roller.
Additionally, we suggest watching a video that describes the process of gluing non-woven wallpaper.
How to wallpaper corners correctly
The technology for laying canvases on external and internal corners is different.
External
These areas are the most noticeable, so they must be covered with special care. It's easiest if the angle is perfectly straight, but this is quite rare.
If there are defects, the process becomes more complicated. If the corner is blocked, then you will need to trim the canvas along the bend line in order to overlap one section with the adjacent one. This method is not suitable for varieties with complex patterns.
There is another way:
- The strip is glued to a section of the wall.
- Using a special spatula, the material is carefully smoothed out to fit the existing bend, and a transition is formed.
- If required, part of the laid canvas is torn off, after which the excess is driven up or down. There should be a margin on both sides.
- To adjust the pattern in case of skew, the next strip is overlapped until the pattern is aligned with a distance of 5–10 centimeters from the edge.
- Using a ruler, which serves as a stop, the applied canvases are cut exactly according to the design.
- If required, the joining areas are additionally coated with the compound.
Joining an external corner with a trim on one of the adjacent planes is considered the most effective way arrangement This method does not completely correct the misalignment, but makes further gluing and adjustment easier.
Interior
The technology for working with such a section is almost identical to the previous process, but has some nuances:
- All sides are well treated with wallpaper glue. If the composition is applied to canvases, the impregnation must also be quite thorough.
- Laying begins with the wall from which movement is carried out. The first fragment is aligned with the previous one, carefully smoothing it into the corner. For this rubber spatula the waves are driven in one direction.
- The part that falls on the adjacent wall is slightly pressed.
- Further actions depend on the situation. Most often, you need to trim the existing folds in the middle and overlap the excess.
- To achieve better alignment, the edges are shortened and coated, after which the piece is placed on the main part of the canvas.
Technically docking internal corner not much different from similar work on external structures, but this process is considered simpler, since internal corners are visually less noticeable This technology makes it possible to glue different types products, but if the corner does not require trimming, installation is carried out in a standard manner. To do this, the joint of both sides is made with a margin in order to level out the unevenness by adjusting and cutting at the point of alignment. This will take longer, but will get rid of the overlap in the corner.
Video tutorial: how to glue wallpaper with corners trimmed
Joining wallpaper with a pattern
Work technology:
- The strip is laid on the initial part of the wall and is gradually distributed over the surface. The waves are driven towards the corner.
- The material is carefully fixed onto the inner fragment and smoothed from top to bottom. It is taken into account that the canvas must be cut with a significant margin, since trimming the lower and opposite edges will be required.
- The part that falls on the perpendicular wall is distributed. The areas near the baseboards are adjusted.
- If the side is uneven, then it must be pasted over with the next strip lying completely in a vertical plane. The offset must affect the pattern being combined.
- A ruler is set exactly along the line using stationery knife excess is cut off.
- The second strip moves towards the corner strip; the gap needs to be additionally glued.
If there are no problems, you can join directly along the inner corner, but this will require a certain level of skill.
Wallpaper with a pattern is joined according to the same principles as without a pattern, but if you stick a horizontal mark from the adjacent canvases in advance masking tape, then it will be easier to combine the ornament What to do if the joints are crooked
Perfect straight corners are rarely found in rooms, so to eliminate various problems, you can use the recommendation that many designers use - combination. It is necessary to cover the transition from wall to wall with wallpaper with a pattern or bright colors. Part of the pattern should extend to the adjacent side, where it is trimmed at a right angle and combined with a plain material. The joining line will be smooth, and any existing imperfections will not be noticeable.
Non-woven wallpaper is wallpaper made using non-woven cellulose non-woven material. Unlike paper analogues, such wallpapers are superbly washable, allow you to hide even quite noticeable wall irregularities and retain an attractive appearance for a long time. appearance. And the process of gluing non-woven wallpaper is quite simple - the material is quite docile, does not “pull” either horizontally or vertically and practically does not produce “bubbles”. And even in such “problem” places. like external and internal corners, non-woven wallpaper is pasted without any problems - for this, when gluing it is enough to follow a few simple rules.
How to glue non-woven wallpaper on inner corners
The first thing that needs to be said about gluing non-woven wallpaper in corners (both external and internal) is You shouldn’t try to cover a corner with a whole sheet of wallpaper.. In other words, do not try to cover both walls adjacent to the corner with one canvas. Otherwise, there is a fairly high probability that the wallpaper will “lead” in the corner, and the resulting wrinkles will be almost impossible to smooth out without trimming, which will certainly ruin the appearance of the wallpaper. But even if this does not happen, the curvature of the corner (and unfortunately, most of the corners in our apartments are curved) will affect the position of the canvas, and since non-woven wallpaper is glued end-to-end, all subsequent canvases will also have to be glued out of level.
The correct technology for gluing non-woven wallpaper on internal corners is as follows:
- We measure the distance from the edge of the last glued canvas to the corner and add 5 centimeters to it. A panel of exactly this width will need to be prepared for sticking in the corner.
Since the angle can be curved, it is better to measure the distance at three points: the bottom, middle and top of the wall. For calculations, of course, you need to take the largest of the resulting values.
- When the panel of the required width is ready, carefully coat the wall and corner with glue for non-woven wallpaper. Please note that when gluing non-woven wallpaper, the glue is applied only to the walls.
- After the canvas is pasted, you should very carefully smooth the wallpaper in the corner and on the surface using a rubber roller or a dry cloth. next wall.
Using a rubber roller or dry cloth, smooth out the wallpaper in the corner and on the next wall. If the wallpaper “wrinkles” in some places, you can make several horizontal cuts at a distance of 5-10 centimeters from each other.
Please note that this canvas must be glued “overlapping” the previous canvas.
- When both canvases are pasted, all that remains is to use a wallpaper knife and a metal ruler of a paint spatula to “trim the seam.” You can learn more about the “corner trimming” technology by watching the following video.
Video about corner trimming of wallpaper
It is very important to cut both wallpaper sheets “in one step”, since otherwise discrepancies may appear in the cut line.
To ensure that the cut is even and the wallpaper does not “stretch” under the knife? You need to periodically break off the dull tip of the wallpaper knife according to the marks specially applied to the blade.
- After trimming, all that remains is to remove the excess wallpaper. Upper layer can be removed without problems, and the lower one can be removed by slightly unscrewing a small part of the upper panel.
If you did everything correctly, then the panels form almost invisible joint, which remains to be carefully smoothed using a rubber roller.
Glue on external corners
External or external corners are not found in all rooms, but, nevertheless, they can be found quite often. The technology for gluing non-woven wallpaper to such corners is practically no different from the method of gluing internal corners.
The technology for gluing external corners is almost the same as the method for gluing internal corners. First of all, we measure the distance to the corner from the outer panel and prepare a new sheet of wallpaper in such a way that after the sticker they “turn” around the corner by no more than 5 centimeters. From the turning point closest to the corner, measure the distance for gluing the next sheet (roll width minus 1 centimeter). We glue the fabric “overlapping” onto the resulting fold, after which we trim the seam with a wallpaper knife and remove unnecessary parts wallpaper
If the outer corner is fairly even (you can determine this using a plumb line), you can try to cover it with “one sheet”. But keep in mind that the level difference in this case should not exceed 0.2-0.4 centimeters. Otherwise, it is better to glue non-woven wallpaper using the technology described above.
As you can see, there is nothing difficult in gluing corners with non-woven wallpaper, so with a little practice you will be able to do this job perfectly. Good luck with your renovation!