How to properly apply textile wallpaper. Gluing textile wallpaper How to glue textile-based wallpaper

Before they appeared fabric wallpaper, many hundreds of years have passed. Back then, people decorated the walls of their living and living rooms using pieces of fabric. When paper wallpapers appeared, which were cheaper, everyone forgot about textile wallpapers.

Now textile wallpaper has come back into fashion, despite its rather high price. With the help of such wallpaper you can create a rich and sophisticated interior. After all, unlike paper wallpaper, this kind decorative covering The walls are distinguished by their smooth texture and velvety feel.

What do they represent?

Textile wallpaper is wallpaper consisting of two parts: the front fabric, and the back - paper or non-woven.

Textile wallpaper for walls is made from the following materials:

silk;
viscose;
velours;
bamboo;
natural veneer;
straw (Japanese grass).

Currently, most buyers prefer velor wallpaper. They are especially popular due to their velvety surface.

Textile wallpapers have different widths: from half a meter to almost three meters. Depending on which room needs to be wallpapered, the width is selected. If you plan to do decorative panel, paste one fragment or highlight the composition of a room; for this, choose narrow stripes. Wide stripes up to three meters are designed to create volume and the perception of endless fabric surface in the room.

Textile wallpaper is considered environmentally friendly finishing material. They have the following properties:

retain heat;
absorb noise;
Fade resistant.

Despite the mass positive qualities, fabric wallpapers have the following disadvantages:

do not like dust and moisture;
cannot be washed;
difficult to glue;
it is impossible to replace a damaged area;
high price.

You can see how textile wallpaper looks in the interior in the photo:

How to prepare the surface before gluing

Before you start gluing the surface, it must first be prepared. The preparation steps include the following:

collection necessary tools and materials for work;
wall preparation;
preparing wallpaper for gluing.

Unlike gluing paper wallpaper, textile wallpaper requires more thorough surface preparation. The walls must be clean and certainly dry. If wallpaper is pasted onto walls that have an uneven surface, bumps, depressions, stains, residues from old wallpaper or glue, then air bubbles, spots and stains may subsequently appear on the surface. Unfortunately, there is no way to remove them, but you will have to remove and re-glue the expensive wallpaper.

Before applying wallpaper, it is necessary to remove any remaining paper wallpaper from the wall, old paint and glue. Make sure there are no fiberglass spots anywhere on the wall. If the walls have previously been painted, then the surface must be thoroughly cleaned so that it becomes rough. This can be done using special smoothing agents or using trisodium phosphate.

If there are depressions, bumps and irregularities on the wall, then they need to be eliminated. The surface is plastered and primed before applying wallpaper. In addition, the primer mixture must have the properties deep penetration.

After preparation, a layer of special is applied to the wall surface enamel coating(on oil based). This will avoid such phenomena as sagging after the wallpaper dries.

If the instructions included with the wallpaper “how to glue textile wallpaper” say that the wall needs to be additionally treated special means or glue, then this point cannot be skipped.

When working with textile wallpaper, you must strictly follow temperature regime. The permissible room temperature is from 18 to 25 degrees with a plus sign, while the humidity should not be higher than 40 percent. But on the wall surface the humidity should be only 8 percent.

And one more important aspect: if you plan to wallpaper the room in light tone wallpaper, then the color of the wall should also be light. If purchased dark wallpaper, then the wall must first be primed in the same tone. If the difference between the shades of the wall and the wallpaper is significant, then a dark color will show through the fabric.

Wallpapering

In order to carry out the work of gluing textile wallpaper, you need to purchase:

A special adhesive designed for gluing walls with fabric wallpaper.
Rubber roller.
Short nap glue roller.
Scissors.
Roulette (meter).
Pencil.
Brush or plastic spatula.
Glue tray.
Construction knife.
Stripes wax paper(2 mm).
Foam sponge or soft cloth.

The wallpaper is pre-marked. It is better to cut wallpaper on a hard surface than on the floor:

Step-by-step description of the work:

You need to start wallpapering from the corner of the room, adhering to a vertical or horizontal pattern. To make it more convenient to work, you need to draw a line on the wall with a pencil - mark the place where the first strip of wallpaper will be pasted.

This diagram will help you apply wallpaper correctly.

A special glue is used that is suitable for vinyl and textile wallpaper. It must be diluted with water in the proportions specified in the instructions. The glue should be colorless so that it does not stain the surface or wallpaper. It needs to be diluted so that it is homogeneous and without lumps.

This glue is widely used for gluing textile wallpaper.

Using a roller pile roller, you need to coat the wrong side of the fabric strip. This must be done very carefully, because if even a drop of glue gets on the front side of the wallpaper, it will be difficult to get rid of it.

After the glue is applied, it must be left for three minutes to allow the paper to stretch. It is not advisable to coat many sections of wallpaper at once. After applying the glue, DO NOT bend or fold fabric wallpaper, as folds will remain on it. If the instructions supplied with the wallpaper indicate “dry gluing”, then the surface of the fabric wallpaper is not smeared with glue. And it is applied directly to the wall itself.

The prepared wallpaper sheet must be carefully applied to the wall, smoothed vertically with a spatula or brush (not with your hands!) to remove air bubbles and creases.
Two sheets of wallpaper are glued end to end, from bottom to top. The joints are pressed tightly, be sure to ensure that the glue does not protrude onto the surface of the fabric. Carefully remove the glue at the joints with a spatula. If a few drops of glue get on the fabric, it must be wiped off very quickly with a clean, moistened sponge using vertical movements. To protect against escaping glue, strips of wax paper are glued to the wall at the joints. After the wallpaper is pasted, the joints are carefully folded back and removed flat.
If the strips of wallpaper were prepared in advance and cut off with a margin, then directly on the wall, when the wallpaper is fixed and smoothed, using construction knife you need to cut off the excess at the bottom.

How to care

After the entire room has been covered with textile wallpaper, it is necessary to close the room until completely dry to prevent drafts.

After the wallpaper has completely dried, it should be handled as carefully as possible. Dry dirt and other contaminants can only be removed with a vacuum cleaner or a brush with soft bristles.

If the wallpaper has a water-repellent base, then it can be wiped with a soft, damp cloth.

You can watch the video to see how to apply fabric wallpaper yourself:

The custom of decorating the interior with wallpaper dates back to ancient times. Initially, wallpaper was made from expensive fabrics with complex designs and were affordable only to noble people. The fabric used to decorate the walls was quite dense and was attached to the walls using special staples. With the invention of paper.

But not everyone could afford such a decorative element, since the design was applied to the paper panels first by hand, and a little later using screen printing. With the development of the modern paper industry, paper wallpapers began to be used everywhere, being simple and in a convenient way wall decoration.

Confirming the common assertion that everything new is well forgotten old, in Lately Fabric-based wallpapers began to be in great demand.

The surface of textile wallpaper can be made from materials such as:

silk;
cotton;
artificial acetate or viscose fibers.

Wall decoration with textile wallpaper is excellent for bedrooms and children's rooms. It is not recommended to use such wallpaper in kitchens and other rooms where there is increased dampness.

How to properly apply textile wallpaper: preliminary stage

Of great importance for obtaining a perfect result is preliminary preparation room walls. This stage must be approached with maximum responsibility. Here they proceed in the same way as before pasting the surface of the walls with paper wallpaper - remove old wallpaper, remnants of adhesive deposits, lagging layers of paint or plaster.

Photo: you can do all the work yourself with your own hands

If there is a suspicion of the presence of mold and other bacterial contaminants on the walls, then it would be useful to treat the surfaces with antibacterial agents, such as Clorox or Lysol, which can be purchased in specialized stores.

Walls under textile wallpaper must be smooth, clean and dry. Therefore, all cracks, irregularities, chips, and cracks must be carefully sealed using putty mixtures and thoroughly cleaned. After this, the surface must be primed or coated with a layer oil paint. Such preparation will guarantee that after gluing the fabric panels will not sag.

If you plan to stick textile wallpaper on walls painted with durable glossy enamels, then it is advisable to roughen the surface. To do this, the walls can be treated with fine sandpaper or rinse with an aggressive alkaline preparation, followed by treatment with clean water.

Remember! It is better to pre-treat walls with light-colored materials or materials similar in tone to the color of the wallpaper. Otherwise, after gluing, you may find that the overall color scheme of the pasted room differs from the color of the wallpaper in the roll.

For relax further work You can pre-glue the walls with special paper or other materials. It is recommended to glue the backing in horizontal stripes so that in the future the joints of the wallpaper do not coincide. If you have chosen this option for pre-finishing the walls, then you should start gluing the wallpaper no earlier than two days later to allow the paper backing to dry thoroughly.

Photo: classic interior- this is the strong point of textile wallpaper

Stage two: let's start wallpapering

Important warning! First of all, carefully study the instructions that come with the purchased wallpaper. Typically, manufacturers describe in great detail all the nuances of using their products. If this is not observed, it will be impossible to make a claim to the seller if defects are found, both in the wallpaper itself and in the event of an unsatisfactory result after gluing it.

Check whether the quantity of wallpaper purchased corresponds to the footage of the room.
Make sure that all rolls have the same article number and color shades.
Prepare glue that matches the brand of your wallpaper. Make sure that the glue does not contain lumps or foreign matter. If necessary, strain it through a colander.
Cut the panels with scissors to the desired length, adding 1-2 cm to fit the pattern.
Apply an even layer of glue to the underside of the cut panels using a wide brush or roller. Be sure to ensure that there are no dry areas left. Special attention We devote to the edges of the sheets.
We fold the sheets in pairs with the coated surfaces facing each other. Let stand for about 5 minutes.
Before gluing the first sheet, draw a straight vertical line on the wall using a plumb line and a long piece of wood.
We apply the sheet to the wall and smooth it with careful movements from top to bottom. To smooth, use a clean, soft cloth, as... Using a roller can damage the fabric surface.
We glue the next panel end-to-end with the previous one, aligning the sheets according to the picture.

Avoid bending the cut panels, otherwise the resulting folds will spoil appearance finished surface. Do not allow glue to get on the front side of the wallpaper. If this happens, remove excess glue with a soft sponge or white cloth.

How to care for surfaces covered with textile wallpaper

Unless otherwise indicated on the wallpaper packaging, it is perfectly acceptable to clean the walls regularly (1-2 times a month) using a vacuum cleaner. If necessary, fabric wallpaper can be applied without allowing excessive wetting of the surface. It is enough to wipe the walls with a damp soft cloth.

You should know! Wallpaper made of fabric gives a unique charm, comfort and sophistication to the room, has a noise-absorbing effect and, according to experts, proper care can last about 10 years.

If you want to maintain the attractive appearance of a room covered with textile wallpaper, you should not neglect the advice of professionals. If your wallpaper came with care instructions, be sure to save them and follow the manufacturer's recommendations.

Useful video instructions:

This type of wallpaper gives the room warmth and coziness.

Many centuries ago, people began to decorate walls with fabrics that gave them a rich look.

Today you can find exquisite textile wallpapers in many stores.

They have an individual, pleasant texture.

There is a wide variety of colors of this material. Such wallpaper is quite expensive, but it is very easy to apply. The correct technology for applying the material to the wall must be followed.

That is, you will first have to learn how to glue textile wallpaper. When applying the material to the walls, dexterity and adherence to certain rules will come in handy. The front side of the wallpaper is fabric, so you need to glue it very carefully.

Textile wallpaper can be various types, differing in design and structure. Most of them look very rich. Which gives the room a chic look.

Textile wallpapers have the following structure:

paper base
fabric that is front side

Quite often people wonder how to glue textile wallpaper on paper based? In principle, there are no special differences from the procedure for gluing conventional material.

Glue is also applied to the surface and material. The main thing is to avoid friction; the fabric on the front side is too finicky.

Let's briefly consider what types of textile wallpaper can be found in stores:

WITH linen covering, that is, the front side is linen fabric. This material is resistant to sunlight.
Synthetic look. It contains thin foam rubber under the fabric, which additionally provides warmth and sound insulation.
Silk wallpapers are very rich. They are mainly used in the bedroom or recreation room.
Felt wallpaper is mainly made to order. They hide uneven walls well and are resistant to mechanical stress.
Velor wallpaper is glued very rarely in rooms where there is practically no dust. There is a pile on the front side of this material.

Any of these wallpapers are very expensive. They should not be exposed wet cleaning brushes and sponges. They do not tolerate friction. Therefore, you should not glue them in the kitchen or restroom.

Preparing for work

Before starting work, you should prepare all the necessary tools.

The following items will be useful when covering a room:

adhesive composition
roller
spatula
rags
pencil
glue container
detergent

Once a person has decided on the material for pasting, you can start preparing. To do this, remove old wallpaper and paint. After this, you need to examine the wall for chips and cracks; before pasting, they need to be repaired with putty.

All surface irregularities are leveled and primed. Before the gluing procedure, you need to make sure that the wall is smooth and dry. Dirty and wet surface will cause bubbles to form.

Before pasting, you should check the temperature in the room. The best option from eighteen to twenty-five degrees. Humidity should not exceed forty percent. It is better that the color of the material matches the base.

That is, light wallpaper should be glued to a white surface. This will help prevent dark spots on the wall from showing through. To do this, use a white primer or completely finish all walls with putty before applying wallpaper.

Pasting

Let's look at the procedure for directly gluing walls with this material in order:

Before printing rolls, you should pay attention to: pattern, color and direction of the pile. They must match on all rolls. There may be differences due to different batches.
After this, the roll needs to be rolled out on the floor and cut into the necessary strips. It is important that the pattern of the stripes coincides with each other. That is, the beginning of the stripe in the pattern should correspond to the other stripes. Next, you need to prepare the adhesive. It is best to purchase glue under certain type material: for paper or non-woven wallpaper. In the first option, the composition is applied to the wall and wallpaper. In the second option, glue is applied only to the surface, which reduces work time.
Usually wallpaper is glued from the corner of the room. The horizontal and vertical direction of the drawing should be observed. You can additionally draw stripes on the surface. The material is glued from top to bottom, while they are smoothed with a hard roller, from the middle to the edges. You cannot glue such wallpaper overlapping; they are applied only end-to-end.
All windows and doors must be closed at the time of pasting and until completely dry. There should be no drafts. Otherwise, they will simply fall or lag behind in some places. The remaining pieces of wallpaper below are cut off with a stationery knife after complete drying.
Many people purchase seamless ones. Their advantage is that after pasting not a single seam is visible. But gluing them is quite difficult. One cannot cope here alone. They are applied horizontally around the perimeter of the entire room, including all openings. Holes for windows and doors are cut later, after the pasting is completed. To fix the beginning of the roll, with this gluing scheme, you can use a stapler.
The joints between the wall and the ceiling can be covered with a special decorative plinth. Subject to the right technology pasting can be achieved excellent result, even in the absence of skills.

When covering walls with textile wallpaper, it is better to adhere to the following recommendations:

The strips can only be cut with scissors; after all, the basis is fabric.
Pasting occurs only end-to-end.
In order to preserve the wallpaper, rubber wallpaper should be used.
Sometimes people are interested in how to glue textile wallpaper on a non-woven backing? If such material is available, it is better to apply the adhesive only to the wall, which significantly reduces the work time.
If the wallpaper accidentally gets dirty, the stain should be removed with a damp cloth, but not wet. At the same time, you should not rub the dirt. When the stain disappears, the cleaned area should be blotted with a dry cloth.
If wallpapering is carried out by several people, it is better to use seamless wallpaper. The result will be pleasing to the eye.

As can be seen from the above, there are not many nuances of covering walls with textile wallpaper. The main thing is to avoid friction of the material.

How to properly care for wallpaper

Sometimes you have to dirty the wallpaper directly during the pasting process.

This situation can be corrected.

But it is worth considering that textile wallpaper is still a rather delicate material.

You can’t get this wallpaper too wet; you can blot it with a damp cloth.

In rare cases, it is possible to use a remedy such as Vanish.

But first, it’s better to check the reaction to the substance on an unnecessary piece of wallpaper. Otherwise, the situation can only get worse.

Do not forget that textile wallpaper is expensive material, so it’s better not to get them dirty at all. They can be rendered unusable quite easily by any careless action. In some cases, one drop is enough to ruin them.

Caring for such wallpaper requires care. This will increase the time they are used. In general, it is better to dry clean them. A good tool There will be a vacuum cleaner to clean the wallpaper from dust. Of course, there are stain removers for textiles. But they should be used only in extreme cases and with caution.

You can watch the video on how to glue textile wallpaper:

Before you start gluing wallpaper, you should decide what tools and materials you will need:

Gypsum putty

Water-based paint

Adhesive for textile wallpaper

Sharp scissors

Rubber roller

Short hair roller

A piece of soft fabric

Surface preparation

The preparation of the surface for gluing textile wallpaper should be carried out more carefully, since it must be perfectly clean and dry. Otherwise, the appearance of the pasted textile wallpaper may be spoiled.

First of all, you should remove old wallpaper, paint, and fiberglass from the surface. If the wall had an enamel coating, then it needs to be roughened using trisodium phosphate. After this, the wall surface should be washed with clean water.

All defects present on the surface must be removed. Then the walls must be coated (use a deep penetration primer) and given time to dry.

After this, so that the textile wallpaper does not sag after drying, it is necessary to apply oil-based emulsion paint to the walls in one layer.

Important! Make sure that the surface on which the wallpaper will be glued does not differ from it in tone. You can use a waste paper lining as a backing.

Please note that the substrate should be glued horizontally. Otherwise, the joints of the substrate will be visible through the wallpaper.

Gluing technology

When gluing textile wallpaper, first of all, you should remember that the room temperature should be from +18 to +25 degrees, and air humidity - 40%. The humidity on the surface itself should be 8%.

Cutting wallpaper and marking the wall

First you need to check that the color, pattern, pile direction and lot number are the same on all rolls.

Such wallpaper should be cut in the same way as regular paper wallpaper: measure the height of the wall, add 5 cm to the allowance and cut off strips of the appropriate length, adjusting according to the pattern.

Important! When cutting wallpaper, use sharp scissors!

After this, make markings on the wall.

Important! Make markings on the surface of walls and strips of wallpaper exclusively with a simple pencil, otherwise stains will remain on the wallpaper.

When you have marked the wall and cut off all the strips of wallpaper, you should write on each strip the number according to which it will be pasted. After this, apply the wallpaper to the wall to check the pattern.

Before applying glue, decide on the underside of your wallpaper.

Important! Since textile wallpaper requires a more scrupulous attitude, for gluing it you should use a special glue that differs high quality and the absence of dyes. You can use vinyl glue, which has a low water content. And, most importantly, do not thin the glue.

Important! After coating the canvases, you need to give the glue time to absorb into the wallpaper. At the same time, fold the strip of wallpaper with the coated sides inward (one side by ⅔ of the length, and the other by ⅓). Then roll the strips into rolls and leave for 5-10 minutes.

Do not bend the wallpaper, otherwise folds will form on it, which will subsequently be visible on the walls. And remember that the canvas should be spread strictly in one layer so that the material does not swell.

Important! If you use textile wallpaper with a non-woven backing, then the glue is applied directly to the wall. This way your wallpaper will not deform after drying and will remain clean.

Start gluing wallpaper from the corner and do not forget to observe the direction and coincidence of the pattern. To facilitate this process, markings can be applied to the wall surface.

Important! Textile wallpaper should only be glued end-to-end.

To stick the first canvas on the wall you need to: make an allowance of 2.5-3 cm on the ceiling, press the center of the strip of wallpaper with a rubber roller, and then smooth it along the sides to remove air and unevenness. In this case, it is necessary to smooth it smoothly and without pressing hard on the wallpaper. You should not smooth out textile wallpaper with your hands or a rag.

If glue gets on the front side of the wallpaper during the process, clean it with a damp sponge. In this case, all movements must be carried out strictly vertically. The allowance that remains near the baseboard must be cut off with a sharp knife.

Subsequent strips of wallpaper are glued in the same way as the first.

Drying

For textile wallpaper to dry completely, it will take at least 24-48 hours ( exact time will be indicated on the glue packaging). There should be no drafts in the room during drying, and a constant temperature should be maintained.

Textile wallpaper without seams

There are also textile wallpapers without seams. This type of wallpaper is pasted horizontally. Width of some wallpapers of this type is 3.1 m and length is 100 m.

Caring for textile wallpaper

Textile wallpaper should be taken care of very carefully. To remove dry dirt and dust from them, use a vacuum cleaner or a soft brush.

If any stains appear on the surface of the wallpaper, use a damp piece of cloth or a sponge dampened to remove them. warm water. You can also use a less concentrated soap solution or detergent.

Important! Dirt must be removed without strong friction using a slightly damp sponge or cloth. After this, blot the cleaned area with a dry cloth.

We think that after reading this article you will easily cope with gluing this kind of wallpaper. But, if you still have questions, you can watch the following video.

Today we will figure out how to glue textile wallpaper, which is an excellent option for lightly soiled and low-traffic rooms, such as. Buy wallpaper with a reserve so that if something happens you can re-glue some part. Remember that textiles, firstly, are very expensive, and secondly, friction with sponges or brushes.

What types of textile wallpapers are there?

The structure of textile wallpaper is quite simple: it is either non-woven fabric, as well as a layer of fabric that goes on top of the base and is the front side. Textile wallpapers are distinguished by their varied structure and design, most of them look quite “rich”. Let us briefly list several types, and then consider how to glue each of them:

Linen. As the name suggests, the front side consists of linen fabric. One of the features worth noting is good resistance to exposure to sunlight.
Synthetic. Under the textile fabric there is foam rubber, which has thermal and sound insulation properties.
Jute. They will help you hide various irregularities on the walls. Of the varieties of jute wallpaper, it is worth noting those intended for painting. They are resistant to sunlight.
Silk. They have the most “rich” appearance and are suitable for rooms such as a bedroom, a recreation room.
Felt. They have a good effect that helps hide unevenness on your walls. They are resistant to mechanical stress, safe for human health, and are manufactured to special orders.
Velor. They should be glued in places with not very high traffic, where there is a little dust and dirt. Paper is used as a base, and nylon pile is placed on top of it.

Video about textile wallpaper

How to glue textile wallpaper

List of required materials and tools

Before as , stock up on a number of tools and materials:

textile wallpaper of a certain type;
gypsum putty;
water-based emulsion (paint);
roller;
putty knife;
rag;
sandpaper (if required);
primer;
pencil;
detergent.

Preparing the walls

Textile wallpaper needs careful attention, which must be leveled to almost perfect condition. First, remove the old ones from the wall using heated water and a spatula. If you have paint on the walls, then its layer also needs to be removed using the same spatula. Among other things, an invisible layer of dust may form on the wall under old wallpaper or paint, which also needs to be removed using detergent.

Use a spatula to scrape off any bulges from the wall and gypsum putty Seal all existing recesses. Having done this, cover the wall with a couple of layers of primer, or use water-based paint so that the adhesion of the wallpaper to the wall is most effective. You can also use recycled paper pads instead of this paint or primer.

Gluing process

Next comes the actual gluing of textile wallpaper on the walls of your room. Before unpacking the rolls, check whether their color, pattern, and direction of the fibers match. An important point There is even a production batch, which should be as identical as possible.

Spread the roll on the floor, measure the height of your walls and add about 50 mm. This is the length you cut the first strip. Make the second one the same length, attaching the first one to the roll. At the same time, try to match the pattern on both strips.

The next step, when you cut all the strips and mark them on the back with a pencil, start applying them to the wall to check if the drawings match. Take your glue, if you need to dilute it, then use the instructions that come in the package or on the bottle. such a layer as indicated in the instructions for use.

After this, to allow the glue to soak in, the edges are folded so that they meet approximately in the middle of the roll, and the reverse side is hidden (like a roll). Depending on the glue you choose, you will need to wait about 10-15 minutes. It is best to start gluing wallpaper on the side of the window. Set aside the width of the strip from the window and draw a vertical line with a pencil, along which you align the first strip.

Place the wallpaper approximately in the middle of the wall and begin to smooth it sideways, up and down, with a roller to remove excess air and various irregularities. Close all windows and doors and let the walls dry for 1-2 days. Time depends on the same glue.

Use only scissors to cut strips.
Gluing is carried out exclusively end-to-end.
In order to keep the wallpaper intact, use only rubber rollers.
If you are gluing wallpaper on a non-woven base, then apply a layer of glue directly to the wall. This is the positive side.
If there is a stain left on the wallpaper, then remove it with a damp (but not wet, without water) cloth or sponge; you do not need to rub anything, but lightly press it onto the stained area. When the stain disappears, you need to blot the area with a dry cloth.
There are textile wallpapers of large width, the gluing of which is carried out horizontally. This will help you avoid the hassle of aligning stripes to maintain the integrity of the design, and you will also get rid of unnecessary seams.

How to care for wallpaper

Caring for them, as well as the process of gluing them, requires care, which will increase their service life. They are intended for dry cleaning only. Use the same vacuum cleaner to remove layers of dust from them. There are special stain removers for textiles. They can be used in extreme cases of serious contamination in hard to reach places.

You can also use clear varnish to cover your walls. In general, look carefully at the packaging of the rolls; all the properties they have are indicated there. Rare options even include wet cleaning.

But the main drawback is that they instantly absorb all moisture and all odors, so it is highly not recommended to use them in gluing or kitchens. In addition, they are quite expensive to constantly replace due to stubborn stains that appear.

Conclusion

Now you can safely cope with this difficult task and hang textile-based wallpaper yourself, saving a lot Money. We tried to cover the entire gluing process without missing a single moment. If you still have any questions, then ask them through the comments below.