Fencing the territory is an indispensable attribute of a landscaped courtyard. The fence provides protective and decorative functions. In many cases, it becomes a very significant element of the overall architectural and landscape appearance of the estate. It can be built using a wide variety of materials. Here we will look at the installation option. If you have basic construction skills, you can cope with this task without much difficulty.
Types of Euro picket fence
The term “Euro picket fence” usually refers to a metal material for fencing made from profiled sheet metal. Much less often it is made from profiled pipes rectangular section Therefore, in the future we will consider only the first option. Before you start installing, select the most suitable material. Picket fence options differ in characteristics such as:
- profile shape – U-shaped, M-shaped, triangular, convex round;
- edge quality – regular or rolled;
- decorative protective covering– one- or two-sided, polymer film or powder coating;
- the shape of the upper edge of the strips is in the form of a trapezoid (standard), peak, tulip (trefoil, clover), dome, wave, straight under the covering strip.
Here are a few photos illustrating different types and options for Euro picket fence according to the shape of the profile, according to the shape of the upper cut 
, with a polymer coating, including one imitating valuable wood species, 
. Thanks to the huge variety of materials, installation DIY picket fence can be performed in any conditions.
Material selection
Before you start building a fence, you should decide on its type and location. To do this, it is enough to prepare a sketch and take measurements. The data obtained will help in choosing required quantity materials. When purchasing a picket fence, be sure to take into account the dimensions of its strips, which have the following ranges of values:
- length – 0.5–3 m;
- width – 80–130 mm;
- thickness – 0.4–0.5 mm.
Most often, for fences with a simple (rectangular) span shape, a picket fence 150–160 cm long is chosen. If you intend to build a fence longer complex shape, for example, from the options presented in these photos 
, the selection of materials must be treated with greater care. In this case, you will need strips different lengths. To reduce waste losses, it is better to purchase a factory-ready picket fence of the most suitable sizes.
The most beautiful and durable DIY picket fence will be made from planks with a polymer decorative and protective coating to look like wood: for example, this 
. Fences made of multi-colored picket fences look original 
, especially since the color range of this material is practically unlimited. In other words, you can experiment with the appearance of the fences as you like.
Other materials for installing a European picket fence
In order to do DIY picket fence, you will need other materials. Their list depends on the overall structure and design of the fence. The most common type of such fences is a fence on a metal frame with vertical slats. The basic structure of the fence, the construction of which we will talk about later, is represented by the following sketch 
. The set of materials for its construction must include:
- bulk materials for concreting racks - cement, sand, crushed stone;
- square profile pipes 60x60 mm with a wall thickness of 2 mm - for racks;
- profile pipes of rectangular section 40x20 mm with a wall thickness of 1.5 mm - for horizontal joists;
- hardware with which the picket fence is attached to the logs - usually special metal screws are used for this;
- plugs for the upper ends of the racks - to protect against precipitation getting inside.
Instead of metal posts, you can lay out brick or stone pillars and parapets, but this type of fence will cost much more. When the fencing option has been selected, the work plan has been drawn up, and the materials have been purchased, you can begin to install DIY picket fence. You should not save too much on components for the fence. High-quality materials will last at least 1.5 times longer than their budget counterparts price segment. Therefore, the increased costs will be fully justified.
Installing a European picket fence: step-by-step instructions
Understanding the installation process DIY picket fence The easiest way to get it is by watching videos posted on the Internet. As an example, we can offer the following videos:
Here Special attention You should pay attention to the condition of the soil, which can be completely different in different places. This is the determining factor for choosing the method of installing fence posts. The fencing construction procedure includes the following steps:
1. Marking the contour of the fence on the ground. It is performed to determine the installation locations of the racks, including under the wicket and gate. Optimal length fence spans - 2–3 m. If necessary, during marking the ground surface is also leveled.
2. Installation of the outer fence posts. A cord is pulled between them to align the entire row of supports along the same line. The depth of the holes for the posts, depending on the condition of the soil, can be in the range of 1–1.8 m. The weaker the soil, the deeper the wells should be. In dry and strong soil, you can do without concreting - just fill the racks. After concreting, the racks must be left for at least 24 hours, preferably 2–3 days.
3. Installation of horizontal logs - they are welded or bolted to vertical supports. The lower crossbars are located at a height of at least 30 cm from the ground. The top ones are 50 cm below the top of the rack. Welding seams must be thoroughly cleaned. Ready frame Be sure to cover it with a primer and paint it (usually the color of the picket fence).
4. Attaching the picket fence. It is not recommended to make the distance between the slats more than half their width - with the exception of “checkerboard”, where the gaps can be larger. When attaching a picket fence, it is best to use a template (for example, from a board), which will ensure that you get the same spacing between the planks. The picket fence is attached with two pairs of screws to the upper and lower crossbars.
If the work order is followed, installation DIY picket fence guarantees you a result of excellent quality and durability, for example this 
or like this 
. The work of building a fence cannot be called particularly difficult. This is a good opportunity to save a lot of money, since the cost of installing a meter of fence from metal picket fence Depending on its complexity, they charge 1,000 – 1,800 rubles.
A fence made from high-quality European picket fence will last about 50 years. Adjusted for service life, this is the most cheap fencing for the yard. If defects in the decorative and protective coating are promptly eliminated, the structure can last even longer. For those who want to install DIY picket fence We offer a number of recommendations that may be very useful
Following these recommendations will ensure the protection of the most vulnerable areas of the frame from corrosion, the excellent appearance of the fence, and its safety for others. In terms of the totality of its operational characteristics and aesthetic advantages, a fence made of Euro picket fences is in no way inferior to more expensive fences made of stone or brick. In addition, the picket fence is a “transparent” fence that does not interfere with the ventilation of the estate.
Today there has been a particularly increased interest in European-class fencing. They are installed everywhere both in private property and at all kinds of objects. This means fences made of European picket fences.
Such fences enclose areas of public and administrative buildings and facilities, warehouse and industrial enterprises, summer cottages and other private properties. Let's take a closer look at this direction.
What is a European picket fence?
The essence of the European picket fence
Euro picket fence is a profiled metal strip covered with protective layer polymer (decorative). This material is endowed with a number of advantages, among which the following stands out: high price finished products.
In addition, it is worth highlighting:
- high practicality;
- presentable appearance;
- simplicity installation work;
- durability.
The production uses 0.5 mm thick steel of very high quality with processing:
- zinc – 275 g per square meter. m;
- primer;
- polymer coating – 25 microns (single or double sided).
This ensures the above-mentioned longevity and warranty (at least 10 years) for polymer coating(its uniform fading).
The picket fence is produced by the rolling method:
- sixteen profile bends provide reliable rigidity;
- the upper part, cut off using a stamp, looks classic.
Metal picket fences are an excellent alternative, surpassing them in aesthetic and quality properties. At correct installation similar fence for a long time will serve you, pleasing the eye with its originality of execution.
Material properties
- Fences made of metal picket fences require virtually no work from you additional care during operation;
- This material is absolutely resistant to aggressive environmental influences;
- The strips of metal picket fences, with the same dimensions as wooden ones, are much lighter than the latter;
- In terms of service life: this material is designed for 20–30 years trouble-free operation;
- In addition, such a fence can be repainted at any time (if desired) according to your wishes, or supplemented with all sorts of decorative elements.
Know!
Euro picket bars, having increased strength, are remarkably resistant to strong winds, while being able to bear additional loads.
Such a fence is almost impossible to damage or break!
In the photo above are the first two options for special occasions, therefore it is recommended to use them at a height of at least 180 cm due to the special risk of injury.
On fences from of this material it is possible to mount:
- lighting systems;
- alarm and video surveillance - without worrying about reducing the load-bearing characteristics of the structure.
It often happens that fences of this type are equipped with pointed tips, which significantly increases their protective qualities. Additionally, for insurance, anti-vandal head bolts are used instead of fasteners.
Design and material for the fence
By its design, a fence - a European picket fence consists of:
- load-bearing area (pillars);
- metal picket fence - enclosing area.
The load-bearing area is the pillars between which the fence itself is held (enclosing area).
Pillars can be made from:
- bricks;
- concrete;
- metal
The last option is the most acceptable, because metal (pipe 60 x 60 or more) is the most durable material. In addition, it is less labor-intensive and cost-intensive compared to the materials listed above for supports.
Advice!
When choosing a specific brand of metal pipe for the load-bearing part of the structure, you should proceed from the characteristics of its enclosing part.
The power of the support should depend specifically on the weight of the enclosing part: for a one-sided picket fence, for example, a 60 x 60 pipe is suitable.
– these are elements of direct filling between supports. For metal picket fences, it is recommended to use a load-bearing lintel made of profiled pipe 20 x 40 between the supports.
One picket weighs 700 g, and the light weight does not prevent the use of small-section profiled pipes. The fence can vary in height - from 1.5 to 2.2 meters.
However, thanks modern technologies you can order any size and color. Section widths are 2, 2.5 and 3 meters.
Installing a fence made of Euro picket fence with your own hands is a simple matter
Installation of the enclosing part
- The height of metal picket fences can be from half a meter to 3 m, but the most common option is to use 1.25 - 2 meter strips;
- When installing such a fence, the pickets can be placed at any reasonable distance from each other;
- Sometimes pickets are installed in a checkerboard pattern, thus obtaining a “blind” fence of increased strength, but while maintaining ventilation functions.
Conclusion
As you understand, it is quite possible to install a European picket fence yourself at home or in the country. Clear instructions can be a good help for you! In addition, in the video presented in this article you will find Additional information on this topic.
Choosing a fence for the site not an easy task- it is necessary that it be reliable, durable, beautiful. A fence made of metal picket fence (euro picket fence) meets all these requirements. Climbing on it is problematic - not the same rigidity. Breaking it is “boring” - usually, those who like to misbehave limit themselves to bending a couple of slats. Beauty, of course, is a subjective criterion, but such fences look better than the same solid one. In addition, they are not so susceptible to wind loads, which allows saving on support poles. An additional plus is that they are breathable. In general, a good option.
What is a metal picket fence
A metal picket fence is made from a sheet of galvanized steel. A relief is formed on the sheet, after which it is cut into picket strips and covered protective compounds, paints. The resulting strips are of a certain height. Usually the height is from 150 to 180 cm. To complete the fence, you also need support posts (usually 60*60*2 mm), bowstrings (two or three crossbars that go between the posts) and fasteners.
Types, shapes, profiles
The thickness of the metal of the Euro picket fence can be from 0.4 to 1.5 mm. The most common is made of steel with a thickness of 0.5 mm. The width of the picket is from 80 mm to 128 mm, the length is up to 2 meters.
P and M - shaped profiles of a metal picket fence
There is a metal picket fence with different profiles: P (rectangular), M-shaped and semicircular. M-shaped ones have more ribs and therefore have greater rigidity. But there are also U-shaped ones, in which grooves are formed in the “back”. In this case, it is already difficult to say which of them will be tougher. Most likely, the latter, especially if it has rolled edges.
Semicircular ones also have greater rigidity, but are more difficult to form and usually have a higher price. For added strength, additional grooves can also be formed along the long side.
In general, the more grooves-stiffening ribs, the better the bar’s resistance to bending along its length. But as the terrain becomes more complex, the price becomes higher. Since it is quite large in itself, you usually have to look for a compromise. In any case, the bar should withstand your attempts to bend it.
What to look for when choosing
When you choose a metal picket fence, it is advisable to look at the lot offered to you in person. The thickness of the metal may be stated to be the same, but in practice it turns out that the edge of a strip from one batch can be bent with a finger, but with another batch this trick is not possible. And this is from one manufacturer. The issue is the quality of the metal batch, and it is rarely stable.
A rolled edge, several layers of protective coatings - these are the signs of a good metal picket fence
Also, be sure to pay attention to the edges - it is better if they are rolled. Firstly, it has a more attractive appearance, secondly, the picket fence is more rigid, and thirdly, the sharp edge is curved and it is impossible to get hurt. The only drawback of a picket fence with rolling is its higher price, since it requires special equipment and additional processing time.
If we talk about the products of specific companies, then the Euro picket fence Grand Line (Grand Line), Barrera Grande, Nova, TPK Center Metalroofing, FinFold, UNIX (Unix) are popular.
Painting methods
It is also worth understanding the painting method. There is an iron picket fence with double-sided and single-sided painting. When one-sided, the back side is covered with a layer of primer without painting. Has, accordingly, grey colour. A metal picket fence painted on one side, the inside of the area is gray. It's not so bad - it doesn't catch the eye. If you are not satisfied with this option, either buy it with double-sided painting, or paint it yourself. Paint is taken “for roofs”, choosing suitable shade. Note that brush-painted metal looks... not very good. If you have a spray gun, the appearance will be good, although not ideal.
This is what the “wrong side” of a metal picket fence painted on one side looks like
You should also take into account that there are two types of painting of metal picket fences:
- polymer coating;
- powder paint.
The first method is much more reliable, since the application technology requires special equipment and strict adherence to technology. As a result, such a picket fence can withstand increased mechanical stress. Even if a scratch appears in the coating (although you have to try), the metal does not rust, since there are still protective coatings that prevent rust from occurring.
Polymer coating is the best choice today
Powder coating, in theory, is no worse. But only if it was done according to the rules: a protective coating was applied to the primed metal, and powder paint was applied on top of it and baked in special chambers. But the point is that you can apply paint in the “garage”, and you can somehow burn it there. The result will just be completely different. In addition, there are ready-made sheets of Chinese origin. In them, paint is applied in the workshop, but often directly onto an unprimed steel surface. It is impossible to determine all these nuances externally, and after the slightest scratch rust appears. So the polymer coating is more “safe”.
What can a metal picket fence look like?
You can like metal fences or not, because there is no dispute about tastes. But in terms of practicality, they certainly outperform. Once installed, you won’t think about the fence for years afterwards. It does not need to be painted for it to look decent, since good quality the paint lasts for years without visible changes. And this is one of important factors, which make you think about installing such a fence.
On a strip foundation
With clinker brick foundation and pillars
Installation methods
There is a single-row and double-row (double-sided, checkerboard) method of installing metal picket fence strips. With a double row, the slats are placed on both sides of the bowstring, and so that they overlap each other by at least a centimeter. Therefore, the distance between the slats should be slightly less than the width of the picket fence. With this installation, the planks on linear meter 55-60% more fencing will be required. But the fence turns out to be practically invisible - only from a certain angle can you see a small part of the area. And this despite the fact that the fence will not be continuous and all the “delights” of a solid fence will not affect you.
Most often, the planks are mounted vertically, but there is also a horizontal installation method - it can also be single-row or double-row. Looks good horizontal fence more "exotic". When installing the planks in two rows (double-sided), the result is completely opaque.
The disadvantage of this installation method is that special pillars and intermediate pillars are needed that will provide the required structural rigidity. Another nuance: planks are usually produced up to 180 cm in length; longer ones will have to be ordered, and this costs additional money. So you will either have to install poles more often, or overpay for a non-standard size.
Dimensions and distances
When installed in one row, the gaps between the planks may be different. The exact distance is chosen arbitrarily, depending on how “transparent” you want to make the fence. Most often, the distance between the pickets is 35-50% of the width of the strip. But this is not a rule; there are both smaller and larger gaps.
When installing “checkerboard”, if you do not want your yard to be visible at an angle, the slats should cover 50% of the width of the picket fence or more. If visibility is not important, you can place them so that the edges overlap by only 1 cm.
The height of the fence is selected depending on the wishes of the owners. If you want the yard to be as closed as possible from prying eyes, the length of the plank should be from 180 cm. Taking into account the fact that they will be slightly raised above the ground, this is enough to ensure that the vast majority of people will not be able to look into your territory.
If you don’t care whether something will be visible through the fence or not, you can take both 1250 mm and 1500 mm. In the first case, the fence will end somewhere at the chest level of passers-by, in the second - at eye level or slightly lower (see the figure for an approximate layout), and this is without a foundation.
The span width of a vertical metal picket fence is 200-250 cm. It is at this distance that the pillars are dug in, then two or three crossbars are secured between them. These cross members are called “logs” or “strings”. For a picket fence up to 150 cm high, two crossbars are sufficient; for taller ones, three are better.
Types of Fills
There are several more types of filling spans (distances between support pillars). The easiest way to install is a direct method - this is when all the planks are the same length. On top of such a fence you can put a U-shaped bar made of the same material (sold in the same place as the European picket fence). In addition to being aesthetically pleasing, it also covers the metal cuts, which increases the service life of the fence.
All “waves” require cutting most of the planks to a certain distance. One “wave” per span is made in increments of 50 or 25 mm. With a pitch of 50 mm, the height difference between the shortest and longest slats is significant, but the fence looks more openwork. In the case of a “wave” with a step of 25 mm or with a “double wave”, the difference is smaller. Upper bars they are installed much less often here, but they can also be installed. Only at the point where the “wave” breaks will you have to cut the sidewalls and bend them.
Features and installation rules
When installing a metal picket fence in Middle lane In Russia, it is recommended to install poles from profiled pipes 60*60 mm (60*40 is possible). For crossbars, it is more convenient to take the same profiled pipe, but with a cross section of 40*20 mm. In this case, the fence will definitely withstand wind and snow loads.
When installing, the installation step of the pillars is 2 meters. If there are two crossbars, then they are attached so that there is 25-35 cm to the edge of the bar. With a picket height of 150 cm or more, the distance is 30-35 cm, with shorter ones - 25 cm. But, with a fence height above 1.5 m, It’s better to make three logs, and not only in regions with strong winds. It’s just that with two lags the distance between the fasteners is too large, which makes it easy to move the planks apart.
There are two ways to attach the planks: with self-tapping screws and with rivets. Self-tapping screws and rivets are installed on both edges of the strip on each of the crossbars. That is, if there are two crossbars, 4 screws/rivets are needed for each strip; if there are three, then 6 fasteners are needed per picket fence. You can, of course, attach it to one self-tapping screw or rivet on the crossbar, installing it in the middle. But in this case, pushing the picket fences apart with your hands is as easy as shelling pears - and there is no need to climb over the fence.
It’s faster to install this way, but it’s a “purely decorative” fence
Which type of fastener should I choose? Self-tapping screws are easy to install - this is their advantage. But they also unscrew easily, which, under certain circumstances, can be a disadvantage. Rivets take longer to install, but they are also much more difficult to remove. What to choose? On the front part of the fence or if the fence is left unattended for a long time (for a seasonal visit), it is definitely worth installing rivets. Of course, if the attackers set their sights on it, they will also be able to remove the rivets, but this will be more difficult. When installing a fence between neighbors in houses permanent residence, it is quite possible to attach a metal picket fence with self-tapping screws.
How to make it yourself
As you probably noticed, metal picket fences are produced using almost the same technology as corrugated sheets, and the sheet costs less. Therefore, many people have the idea to make a picket fence by dissolving the corrugated sheet into strips. In principle, this can be done if you are able to cut strictly along the line without any noticeable deviations. But for cutting you need to use metal scissors - punched or hand-held. Under no circumstances should you cut with a grinder, as it burns the protective cover. So the work ahead will not be easy and will take a lot of time. If this doesn't scare you, you can try it.
What is the disadvantage of a homemade picket fence made from corrugated sheets? Everything is obvious: the edge is rarely even, since it is difficult to do it manually. In addition, the cut is unprotected and may begin to rust. You can, of course, coat the sections with primer/paint, but in order for all the layers to adhere properly, an absolutely clean surface is required. That is, the cut areas must first be removed from dust (not so difficult, but it takes time), then also degreased. Only in this case will the protective coating be of truly high quality.
It is advisable to roll the edges - this will give the homemade picket fence greater rigidity, because additional reliefs are rarely formed on the profiled sheet. It “holds” its shape due to its size and alternation of waves.
Deciding to fence own plot from prying eyes or to delimit its internal territory, the question arises about choosing a fence. Looking through the photos, you can note that the most popular are picket fences.
Let's try to figure out why a picket fence is so in demand, what it comes in, and how to build a picket fence with your own hands.
Types, advantages and features
Analyzing the photos that show picket fences, it can be noted that most often they are made of wood or Euro picket fences. What are the features of their differences?
- A wooden picket fence is considered a classic. It is most often found in both rural and urban areas. Its popularity lies in:
— availability and cost-effectiveness of the material;
- ease of assembly;
— opportunities to widely experiment with design.
But it is worth noting that wooden fences made from picket fences can last on average no more than 7 years. After this period, it is most often necessary to replace some elements. Among the disadvantages, we can emphasize the need annual care, such as painting. - A European picket fence is a fairly new and promising option for constructing a fence. The Eurostalker is metal panels, which are most often made of galvanized steel coated with paints. The width of such pickets usually does not exceed 100 millimeters, and the length can be up to three meters. Euro picket fences are becoming popular thanks to:
- attractive appearance;
- wide color palette;
— mechanical strength;
- perfect combination with various building materials, for example, concrete or brick;
- can be used as a main fence or for zoning;
- does not require additional care.
If you want to install such a European picket fence, you need to choose it correctly. First of all, you need to decide what aesthetic load will be carried by a fence made of Euro picket fence. After all, it comes in two versions - with rolled or raw edges. Naturally, picket fences with processed edges will look neater.
The second important aspect is the quality of painting, which can be single- or double-sided. If you need a durable European picket fence, you need to purchase one with a coating powder paints, since they significantly extend its service life and do not lose color under the influence of external factors.
Advice: for those who especially value aesthetics, we recommend paying attention to a picket fence with a rounded top cut. A constructed picket fence that will have a rounded edge is great option for areas with expensive buildings.
Necessary materials
Picket fences are constructed quite simply, for this you can view step by step photos or use our instructions. It is worth noting that the fence is made of wooden picket fence It is erected in almost the same way as from a European picket fence.
Based on the fact that the European picket fence is now more popular, we will consider the construction of just such a fence. So, in order to build a picket fence you need:
- Round or profiled pipes that will act as support pillars. It is desirable that their wall thickness be at least 2 millimeters and their diameter be at least 60 millimeters.
- Iron cross beams. There should be 2 of them between each pair of support pillars.
Tip: in order for picket fences to be strong, the distance between the supporting posts should not exceed 4 meters!
- Eurostakes. On average, 6 pieces are attached per meter.
- Drill, shovel.
- Electric drill, grinder, screwdriver.
- Plumb line, level, tape measure.
- Twine, wooden pegs.
- Cement, crushed stone, sand.
- Paint to match the picket fence and primer.
- Bolts, screws, fastenings.
A European picket fence will be especially strong, which will be fastened with galvanized self-tapping screws.
Site preparation and marking
In order for your picket fence to turn out no worse than in the photo from glossy magazines, you need to spare no time in pre-cleaning the area and marking it. If there are uneven areas, they must be leveled and excess vegetation must be removed.
Picket fences will look smooth and neat if, before installing the supporting posts, you mark the construction site using twine stretched over pegs. It should outline a straight line, which will subsequently become the fence.
Tip: you can also drive pegs in place of the pillars for better orientation. It is worth remembering that the span between the pillars must correspond to the length of the logs. It is better to check this on the first flight, so as not to redo the entire marking later.
Frame construction
Building a frame is very important point, without which it is impossible to make a picket fence. It can be divided into several stages.
- Stage 1 – installation of support pillars. To do this, you need to drill a hole at least half a meter deep at the marking site and install a post in it, and then drive it with a sledgehammer another half meter deep into the hole. Next, it is necessary to carry out butting or compaction and filling with solution. To prevent the support from sagging while the cement has not hardened, spacers can be installed.
Advice: picket fences will stand reliably for decades only if the concreting is done correctly. It is advisable that the solution fills at least half of the hole; otherwise, after the first winter, the pillars may squint or fall out. - Stage 2 - attaching perpendicular joists. In order for the euro-picket fence to be strong, it is necessary to attach the upper joist at a distance of 20-30 centimeters from the upper edge of the support, and the lower one - from 40-50 centimeters from the ground.
- Stage 3 – painting. Picket fences will only have a finished look if the joists and supports are painted. They must be coated with paint of a similar color to the pickets. Painting is not only aesthetic, but also protective.
Tip: using a primer you can significantly extend the life of poles and joists.
Fixing the picket fence
The pickets are attached to the logs of the assembled frame, and in order for the fence to look perfect in real life and in the photo, you should use self-tapping screws of the same color as the pickets for fastening. The average gap between the pickets is from 2 to 5 centimeters. But if you need a denser European picket fence, you can attach it closer to each other.
Advice: for the construction completely closed fence You can use chess technique. The pickets are attached close to each other, but one is nailed on the front side of the joist, and the second on the back.
Assembling a fence from a European picket fence with your own hands is quite simple. This is one of the types of barriers that stands out for its attractiveness, long service life, high quality. Made from durable galvanized metal, the Euro picket fence is made in the form of profiled flooring, which is factory cut into individual elements. Through processing with polymers metal surface the fence is not subject to negative influence environment, does not require additional coloring and special care.
Fencing at the dacha
Features of the Euro picket fence
The main criteria when choosing building materials for fencing construction are durability, reliability and strength.
Eurostalker is relative the new kind fences that meet all the above requirements.
Village installation option
In addition, even an inexperienced person can choose the design of a European picket fence and assemble the fence. The variety of ways to install a picket fence will help transform regular fence V original design in the garden or in the country.
Installing a picket fence has many benefits that explain the popularity of this material.
Near the road
Description of the main advantages:
- Large selection of products (by shape, width, height, color).
- Attractive view.
- Ease of installation.
- High reliability.
- Wide functionality (can be used for zoning personal territory, flower beds, flower beds, fencing general purpose buildings).
- Used for construction different forms, combined with traditional materials (stone, concrete, wood).
- The fence does not require any special care in the future. Material is being processed special compounds, which are highly resistant to atmospheric conditions, so there is no need to paint this fence.
Near a private house
Also, as a main advantage, it should be noted that low price picket fence, in contrast to alternative building materials. The cost of fences most often does not exceed $35 per square meter.
The European picket fence has few disadvantages. To begin with, construction will cost a little more, unlike a wooden picket fence. But in the end result this fencing is cheaper because metal structure no need to treat with an antiseptic and regularly paint.
Option for front garden
In addition, during installation, special fasteners equipped with a press washer are used, since conventional fastening with self-tapping screws will not be able to firmly fix the metal sheet.
The photo shows a metal fence.
Metal picket fence
Types of slats
Exist the following types Euro picket fence:
- "Econova". Unlike its analogues, this type of fence has a lower cost due to the smaller width of the pickets, up to 100 mm, and the number of ribs - up to 14. The height can vary depending on the order of the fence and, as a rule, is made within 1-2 m. Slats installed in increments of 2–10 cm. Installation can be done in a checkerboard pattern. The picket fence is most often used for fencing country houses and dachas.
- "Nova". The width of the pickets up to 120 mm with 15 edges makes it possible to apply various patterns and create a rigid and reliable fence. The protective polymer layer is 20 microns, which prevents the formation of corrosion. There is a matte and glossy finish. It can be installed to fence off dachas or used for protective fencing during the construction of various structures.
- “Barrera” retains all the properties of a European picket fence, but is distinguished by a special method of painting. Special powder coating contributes to the emergence protective film on the surface of the leaf. Special apex shapes create a large assortment choosing a picket fence, and manufacturing in sections simplifies the installation of the fence. The width of 85–130 mm with a size of 1.4–2.2 m allows you to install the picket fence in 2 rows without a gap. In this case, the profiled sheet can be attached evenly or in a semicircle to a brick or metal base.
- "Light-M". The width of the picket fence is 75 mm with 5 ribs, allowing the structure to be light in weight. The fence is installed in one row with a gap of 2–10 cm, or a checkerboard is used. Due to the low cost, in addition to standard application for fencing country houses, it is also often installed as a temporary structure for fencing construction sites.
Varieties of design
Before you make a fence on your property, you also need to decide on a design option:
- “convex arc”, the fence is installed in spans, the top of the sections looks like a convex arc;
- “wave”, the fence is distinguished by a wave on each section;
- “herringbone”, the installation pattern of the fence is standard, and the picket fence itself in the upper part resembles the shape of a spruce;
- “concave arc”, installation is carried out in sections, which are made in the form of a concave arc, with the middle parts of the picket fence being the smallest in length;
- “peaks”, the top is made in the shape of a peak. Each section has 5–6 of these outlines installed;
- “trapezoid”, a section curved in the shape of a trapezoid;
- “canyon”, the installation of this metal picket fence occurs in sections, with each picket from the beginning of the sheet being made smaller by one centimeter and, starting from the center, the pickets increase in size again;
- “pyramid”, the top of the plank looks like a pyramid;
- “ladder”, made of strips of longer and shorter lengths, alternating with each other;
- “wings”, the top of the picket fence is similar to the wingspan.
Colors
Preparing for installation
Before preparing to install the fence, it is recommended to watch a training video on how to make a fence from a European picket fence with your own hands and which supports are best to choose for installing the structure.
Read also: Installation of a fence made of Gitter mesh: price, photo, do-it-yourself installation of 3D welded sections
On preparatory stage construction work The area needs to be cleaned, then a drawing is taken or a sketch of the future fence is drawn and the area where the structure will be installed is marked.
All bushes, stumps, old parts of fences and other objects that may interfere during construction are removed. Then, when the perimeter is cleared, it is necessary to divide the total length into sections of 2.5 m, one established mark is a column that is installed later.
DIY fence installation diagram
When the number of sections and columns is precisely determined, the required amount of building material is calculated. Why you need to decide how close to each other you need to install the slats.
If you install with a gap that is equal to the width of the strip, then total area divided by two, this gives the required amount of building material for one section.
This figure is then multiplied by the number of sections to obtain the total amount of material.
So, the gate will be the same height as the installed sections. If a gate of a different size is required, the parameters are calculated separately.
Detailing
To learn how to make a fence from a metal picket fence, read the link.
Installation
One of the main advantages of a European picket fence for a summer residence is its convenience and ease of installation. The picket fence can be installed on one side or on both sides of the fence, which significantly increases the choice of design.
For self-installation won't need any special tools, you only need a screwdriver. As a rule, the installation of a picket fence is carried out with a gap of 5–6 cm. Since the windage of this fence is less, unlike a profiled sheet, the wind load on the fence is insignificant, and construction will not be required for construction strip foundation. Step-by-step instruction The installation of a European picket fence looks like this.
Installation of pillars
If a profiled pipe was chosen as a support for the fence, then it can be used of any cross-section; as a rule, the dimensions chosen are 50x50, 60x60 or 70x70 mm, the walls must be at least 3 mm thick.
Drawing for installing poles
The requirements for euro-picket support pillars are not as stringent, unlike a fence made of corrugated sheets. They are most often not concreted in the ground.