How to make a beautiful lamp. Original ideas on how to make sconces yourself from scrap materials

Problems with choosing lamps are familiar to many. Lamps are purchased in last resort, so combining them with all other interior elements can be difficult. But there is no need to despair. After all spectacular lamps You can make it yourself without spending a lot of time and money.

1. New Year's decor on the chandelier

Plastic beads, which can be purchased in the department New Year's decor, you can decorate the finished lampshade. Bright colors and shine will turn the lamp into a real decoration of any interior.

2. Cityscape

The outlines of city roofs, cut out of dark paper, are pasted onto a light lampshade. This application will easily transform a boring monochromatic lamp.

3. The whole world at your fingertips

In every home there are old maps that have been lying around unused for years. You can make a lamp from them with your own hands. Simply wrap a piece of appropriately sized card around an old lampshade. For a neater look, the paper can be coated acrylic varnish.

4. From papier-mâché

To make an original lamp with your own hands, you will have to remember the papier-mâché technique, familiar to everyone from childhood. The paper needs to be torn into small pieces and left for a couple of hours in aqueous solution PVA. Then the object is covered with paper pulp layer by layer. the desired shape- for example, puffed up balloon. After the papier-mâché has dried, the lampshade is ready.

5. Second life of old newspapers

Simply covering the lampshade with newspaper, artificially aged with tea or coffee, is too simple a solution. Cut out circles from it and glue them so that they partially cover each other. Interesting game light and shadow guaranteed. Additionally, it is better to varnish the lampshade.

6. Eternal lampshade

From an old metal basket or ordinary wire, you can make a lamp with your own hands, which will become a champion in strength and durability. In addition, this lampshade is also completely fireproof.

7. From bright cocktail tubes

A lamp made from cocktail tubes looks democratic, but at the same time impressive. Just glue the tubes on one side to the old lampshade using silicone glue. If you cut the tubes in half, the lamp will be smaller.

8. Chic and shine

Beads that have no use can be used to decorate a lamp. Thread them onto thin jewelry wire (available at craft stores) and attach it to the metal base of the lampshade.

9. Clear geometry

Cocktail straws painted in gold or silver colors will become the material for making a lamp with your own hands. They are fastened together using threaded thread.

10. Lace patterns

Simply cover or cover a plain lampshade with contrasting lace. In the first case, it is better to use elastic lace: they will fit more tightly to the surface of the lampshade and look neater.

11. Paper chaos

Plain white paper, rolled into tubes, becomes the raw material for the original lampshade. Glue them together in a chaotic manner, moving from bottom to top.

12. Cozy lamp for needlewomen

Any unused buttons can be used to make a cute lamp. String the buttons onto strong threads and secure them to the top of the lampshade.

13. In harmony with nature

An intricately shaped branch will be an excellent basis for unusual lamp. In addition to this, you will need several light bulbs in sockets. Simply wrap the wires around the branch.

14. Almost edible chandelier

The base from an old lampshade, decorated with cutlery, looks quite brutal. This lamp will fit perfectly into the interior of a country or loft style kitchen.

15. Delicate textile petals

To make such a lamp, a fabric is selected whose edges do not fray. Petals cut from it are attached to the lampshade with glue.

16. From decorative rope

Generously spread the base for the future lampshade thick and wrap tightly with a rope with a rough texture. It is not at all necessary to use an old lamp as a base. Even old utensils, such as glasses or bowls, will do.

17. Lamp in a skirt

Translucent textiles, for example, tulle from old curtains, can find a second life. Gather it into folds at the top and secure it to the boring lampshade.

18. Patchwork style

Many multi-colored scraps are tied on the base of an old lampshade. The more there are, the better.

19. From favorite postcards

Often postcards and photos, even those you like, lie idle for years. Cover a boring lamp with them and it will instantly be transformed.

20. Our whole life is a game

A playing deck that is missing several cards should not be thrown away. Thick glossy paper with a contrasting pattern is an excellent material for decorating a lampshade, practical and beautiful.

So, the lighting problem is solved. It's time to get acquainted

In this article, we offer step-by-step master classes on how to make table lamps with your own hands from improvised materials that you always have in the house. It would seem at first glance ordinary and unnecessary things, but from them you can make original and designer lamps for the desktop.

The most popular and simple materials at hand are: glass bottles and jars, cardboard and paper, plastic vessels, water pipes and cement. We will show and tell you how to make lamps from this in this article.

With simple and elegant table lamp made of copper, you can decorate any corner of your home by making it yourself. She'll fit in perfectly modern interior from loft style to rustic. Prostate and laconicism are the main trump cards of this table lamp.

To do this you will need the following tools:

Roulette, marker
Pipe cutter and washcloth
Wire stripping and stripping tool
Pliers and a thin flathead screwdriver
crosshead screwdriver

M materials:

Copper pipes
Acetone and super glue
Copper corners 90°, 7 pcs.
Electric wire
Plug and Electric socket
Switch and light bulb

Technique for assembling a table lamp

To begin, take a tape measure, a marker, a pipe cutter, a rag, copper pipes and acetone.

Mark and cut the tubes

Use a measuring tape and marker to mark where you will cut the copper pipes.
Do this carefully, measuring every millimeter precisely, because if the parts are different, then the end result will not be the same size as they should be.

Guide the pipe cutter and use the nut to adjust the diameter of the pipe. See by copper tube, gradually readjust the diameter with the nut, so that the closure continues until the pipe is cut.
Afterwards, using acetone and a rag, you can wipe the markings off the pipe.

TIP: Our parts have: 3 x 15 cm cuts, 1 x 20 cm cut, 1 x 45 cm cut, 1 x 25 cm cut. We used 12 tubes. When designing your light fixture, please note that the copper elbow size will be added.

While the cable is inside, we connect the parts

Insert the parts together and glue super glue. In order to avoid problems in the future, it is better to glue each part and place it next to each other.

Even though the glue works instantly, you may want to wait a few minutes before proceeding to ensure that the pieces are glued together perfectly.

Tip: It will be more convenient to apply glue if you use a brush. If you want the cover to be at the very top, install it first. This way the first part will be ready, and the cable will go in a different direction.

Tools:

Wire Stripper and Wire Stripper
Incisors
thin flat screwdriver
crosshead screwdriver

Materials:

fork
electro chuck
switch
Copper pipes
electrical wire

Install the electrical system

Open the front panel of the cover and start by stripping the insulation. Connect the ground ( Blue colour) and phase (brown, gray or black) using the two screws you will find inside.
Repeat the same process on the plug and switch.
In the switch you will find two pairs of small screws, a cable that you must cut to the height you want the switch to be and connect to the corresponding sockets going inside the small screws.
All you have to do is screw in the light bulb to create your copper table lamp.

Finally, place the lamp in a corner or place you like and see how it will become a wonderful addition to your interior, lighting up the space!

Master class: Table lampfrom paper

When I first saw the Robert Delta table lamp, it was love at first sight! The shape is amazing, it comes in different bright colors, everything I like. I was recently wondering since the accessories were surprisingly durable, why not use them for a lamp?

Here are all the materials used:

old lantern or lamp kit
template and thick cardboard or paper, you can take polypropylene sheets
glue and putty
sanding block (medium + fine)
wood block (add weight to base)

Tools:

art tapes
metal ruler/xacto knife
drill (can optionally replace xacto knife)

Lamp manufacturing technology

Firstly, print the template (6 pieces of each triangle) (1 of each hexagon).
Cut out the shapes so that they fit snugly on the board. Then use glue to attach the pieces to the back of the mat.
Using a metal ruler and Xacto knife cutting board, cut each shape.
Put them together.

Next, glue the bottom (shapes 2 + 4) to the base (shape 6). The triangles fit together nicely and if you did everything right they will just fall into place.

Then use small pieces of art tape to attach them together and wait for the glue to dry completely.

TIP: Use super glue, it dries instantly (we used Aleene). Apply glue lightly, and wipe off excess.

After gluing the bottom half (shapes 2 + 4 to the base, turn mold 6 upside down (open end down), place the square on flat surface and let it dry overnight, this will help maintain its area.
The next day, start working on the top of the lamp. Glue the shape 1 + 3, leaving a little hole to insert the lamp inside. The top one (form 5) was glued together with artistic tape, but it is not yet glued to form 1 + 3.
Then reinforce the seams using glue with inside.

Then start working on the base of the lamp.

The level at the bottom of the lamp needs to be made a little bigger, so cut some 1×4s to raise it a little. It will also add extra weight, giving it more stability. Use screws to attach the 1×4 to the existing metal base. (We swapped the existing rod with one from another lamp to get it to the correct height).

Next, drill a hole for the cord and insert a plastic sleeve from an old lamp. The lamp should be disassembled, and the cord and wire should be pulled through the threaded rod of the hole in the new base. Inside the lamp, glue it in the center.

At the top (shape 5), mark the center and drill a hole for the center rod. Then glue it in place.

After applying the adhesive, remove excess, and if necessary, lightly, and apply a second layer after sanding.
Using a medium-grit putty and fine sandpaper, finish with a sanding block. At this point, you will notice its strong base.

Once you've finished removing dust, apply paint! To cover the top of the threaded rod, use the top of an old lamp - it just slides over the rod. Then return it back to the nest!

That's it, your handmade table lamp is ready.

Bottle table lamp

Tin can lamp

This lamp is perfect for a home desk, both for students and schoolchildren. Boys will especially appreciate it; it looks more like a transformer and a robot from the future. You can paint or decorate the jar itself with paper, thread, or make it more embossed. How correct.

Table lamp made from plastic bottles

Plastic bottles can always be found around the household, so decorating an old table lamp is not difficult. Usually, when restoring old lamps, the bases are left and plastic is used for the lampshade. The lampshade mount is usually used as an old one. When working with plastic bottles, remember that they are easier to cut paper knife or construction knife. Glue is used for rubber or special glue for plastic.

Table lamp made from branches and slices

Wood in the interior is always a classic - it is always fashionable and relevant. Decorating a table lamp with a cut of wood or old snag with your own hands, you will receive designer item which simply has no price.

To do this, we need to select any piece of wood we like, process it correctly namely, dry it, apply impregnation against pests and cover it with varnish.
The second stage is to mount the top of an old floor lamp into the base. If this is not the case, it doesn’t matter; light supply stores usually sell bases for lampshades.

Other original ideas

The basis for a table lamp can be, in principle, any item you don’t need: these are children’s toys, Sewing machines, unnecessary socks and so on. Experiment and create beauty!

Decorating the house yourself is a favorite pastime of many housewives; this article reveals how to make a lamp with your own hands. You can revive the interior of a living room, bedroom or hallway using improvised means, just by changing the shade of a chandelier, floor lamp or table lamp. Do-it-yourself lamp shades can be used not only in residential interiors, but also in cafes, pubs, and pizzerias.

Selection of materials and lamps for the lamp

Products made for children's rooms must be made from natural, non-toxic materials and painted with environmentally friendly paints.

When manufacturing, you should also remember fire safety Therefore, lampshades made of flammable materials made from paper, plastic, feathers or threads should only be used with lamps that have a low heating temperature.

Need to use LED or fluorescent lamps. They have a number of advantages:

long service life;
minimal heating of the base from the glass part;
the light has three shades: warm, cold, neutral.

In addition, such lamps are also called energy-saving; their only drawback can be called high cost.

It is also advisable to have a specialist connect the wire to the socket. You should not try to perform this operation yourself, as this may lead to undesirable consequences. It is more convenient to decorate an existing lamp frame or make it from durable and not very heavy materials.

To create lamps they use following materials: scissors, mounting knife, fishing line, wire, pliers, hot gun, in some cases it can be replaced with super glue. They should be used by an adult; it is unacceptable to involve a child in gluing. Since in one case he will get a burn, and in another he may glue his fingers together or stick to the parts of the future product.

What can a lampshade be made from?

Many craftsmen make lamps from completely unnecessary materials:

made of plastic or glass bottles;
newspapers, thin or colored paper;
artificial or natural threads;
dried branches unusual shape;
disposable spoons;
old disks.

Plastic lamp

From plastic containers You can easily create a homemade chandelier of different sizes.

For the base you need to take a 5 liter bottle. The bottom is cut off from it. Then circles with a diameter of 1.5 cm are drawn on the surface. They need to be cut out with a mounting knife or small scissors.
The bottom of the bottles for decoration is cut off and the entire surface is cut with scissors into strips 0.5 - 1 cm wide, then the workpiece is heated over a lit burner. When exposed to heat, the stripes will take on a chaotic appearance.
Then the blanks are inserted into a 5-liter container with holes, and the lids are screwed on the inside. Then a wire is threaded through the large neck and the lampshade is installed. For such a lampshade you need to use an energy-saving lamp.
In some interiors you can find a fancy lamp made on the basis of an ordinary hanger or straw hat. In general, nothing can limit the scope of imagination of both home craftsmen and professional designers.

Glass bottle lampshade

Very interesting option homemade chandelier obtained from glass bottles. They are used to decorate the halls of catering establishments. Also this a good option for the kitchen in a residential building or apartment. This can be a lampshade consisting of one or several bottles, the bottom of which is cut off. You can do this yourself, but it is better to use the services of a workshop where they cut glass and mirrors.

How to use thread

For a lampshade made of threads or ribbons you will need: finished frame made of strong wire, thread different color, scissors, glue.

The frame consists of two rings connected to each other by metal pieces. You can make it yourself from strong wire.
One color or several shades of thread is required.
A thread is secured to the bottom, then it needs to be pulled through the top ring, lowered down and thrown through the bottom ring. You need to make sure that the thread is taut and the turns fit snugly against each other. As soon as the thread runs out, you need to attach the next piece to the bottom ring.
Carefully trim the remaining threads and glue them on the back side.

Spoons for lamp

You can make a multi-tiered, colored lamp from ordinary disposable spoons.

It is necessary to make a frame from wire; for a round small lamp you need to make three circles with a diameter of 12, 18, 26 cm. Then the circles are fastened together using fishing line. The largest diameter will be at the top; there should be the same distance between them.
In the spoons you need to make a small hole with a thick needle at the top of the handle.
Spoons color acrylic paints in three colors, for example, yellow, orange, red.
Assembling a homemade chandelier: cut the fishing line to a length equal to the distance between the circles. A spoon is tied to one end of the fishing line, and the other to the frame. You need to tie spoons to the lower circle of small diameter yellow color, to the middle - orange and to the top - red.

Lightweight and elegant lampshade

For a paper lampshade, paper or thin cardboard is suitable. Such a lampshade can be either rectangular or square shape. First you need to think about the size of the lampshade than bigger room, the wider the design can be. In a small nursery or hallway, a lampshade with a diameter of 30–35 centimeters will look good.

The frame can be made of wire; it will consist of an upper and lower part; consider making a lampshade in the shape of a cylinder.

You need to make two circles of wire required diameter. They are connected to each other using a fishing line, the distance between the lower and upper frames is 12 - 15 cm, the hoops are fastened with fishing line in three or four places. The larger the diameter of the base, the more connecting elements need to be made.
On a piece of paper you can draw circles of different diameters and figures of cartoon characters. Outline drawings can be taken from the Internet and printed, then redrawn using carbon paper. A special ruler is suitable for drawing circles, or you can outline lids or buttons of different diameters. Some drawings are completely cut out stationery knife, some cut along the contour.
The paper is tried on the base and glued with an overlap. Then glued to the wire; it can also be secured with thin wire. To do this, first make a hole in the paper with a thick needle or awl, then thread the wire and carefully tie it to the frame. It is advisable to glue thin paper, as it can easily be damaged.

Exclusive lampshade made of metal basins

Cans made of any metal are used; an interesting option would be made from copper or aluminum containers. An old, used basin will also work. If there is a through hole in it, it needs to be welded or sealed, for example, epoxy resin.
The inner surface must be painted light color so that the light reflects as much as possible from it.
The outer surface can be painted in a dark, rich color that harmonizes with the interior.
A fringe about 5 centimeters long is glued to the bottom of the headband with hot glue. In the central part of the basin you need to make a hole for the wire. It can be drilled with a drill or pierced with a nail.

Such a lampshade can be decorated with a mosaic of CDs. To do this, the discs are cut into small fragments with sharp scissors, which are glued onto outer surface pelvis You can glue only the bottom outline and paint the rest. Or decorate the entire surface of the lampshade with such a mosaic. The more convex the surface, the smaller the disc fragments should be.

Natural materials

An original lamp can be made from a dry branch of an unusual shape. It needs to be cleared of bark and covered with stain, then, if desired, processed clear varnish. The branch must be attached to the hook on the ceiling using regular fishing line. Then I wind the wire with the lamp onto the branch several times. A branch entwined with several wires looks beautiful.

You can make a lamp from plastic hangers. Described in detail in the video:

Lamps for different rooms

DIY bottle chandeliers are more suitable for the kitchen. Structures made of glass or plastic will be easy to clean from dust and wash if necessary. For the kitchen, hallway or living room, a lamp made of natural wood.

For a children's room, a lampshade made of painted plastic bottles, a floor lamp made of bright threads, or a paper composition would be more suitable. The last option cannot be called durable, but this is the option that children will like. Girls will like a lampshade with butterflies and plant elements; boys will like designs with cars, superheroes or bright plastic lampshades.

In some cafes and pubs they are used for hall decoration. original lamps from bottles. These could be beer bottles. They can serve as a lampshade for light bulbs, or be an interesting frame for a lamp.

Ideas for homemade lamps by location

You can give it a new look with your own hands floor lamp. You can decorate the lampshade with fabric, threads, paper with cut-out designs, you also don’t need to ignore the base and leg of the lamp. They can be painted with acrylic paints, glazed, and decorated with beads. The decor of the lower part of the floor lamp should echo the elements in the upper part. The simplest option is to decorate the lampshade in a single color with lace or guipure.

Decorating lamps

The lower part of the lampshade made of threads can be decorated with pom-poms same size hanging on a thread. They are glued to the inside of the frame with glue. Pompoms can hang on both the same and different heights. They can be made in one color or combined several shades.

For decoration paper lamps you can use lace, thick tulle, beads different sizes. Decorate glass jars Or bottles can be glass pebbles, which can be purchased at hardware stores. You can also use buttons of different sizes and colors. Small buttons can even be glued to PVA.

On new year holidays It is customary to decorate the Christmas tree, but you can also decorate the shades of lamps and floor lamps. Here you can use regular rain, hand-cut snowflakes, Christmas tree figures, decorative balls and a regular garland. If in wall or floor lamp installed Powersave lamp, then its lampshade can be decorated with paper snowflakes.

Wall sconces are installed in living rooms, bedrooms, and children's rooms. After repairs, you can use old sconces only by changing them appearance. You can paint the body of the lamp in a light color, and apply bronze or silver paint on top with a hard bristle brush to create a patina effect. If the lampshade is glass, the desired pattern is applied to its surface using a glass stencil. Here you can use contour paints (they are used to create stained glass) or aerosol paints.

When you want to change the decor in your apartment and add a little originality to it, start with the little things. Try changing the lampshade, and you will be surprised at the transformation of your family nest.

And if you manage to find an original model that differs from analogues, then the changes will impress not only you, but also your guests.

Is it true, unique lampshades they cost a decent amount of money, because you can’t buy one-piece works by famous masters for pennies.

But no one is stopping you from creating your own a unique masterpiece cheap, and sometimes even waste materials, which will look much better than the samples presented in the store.

All you need are simple materials, a little patience and a flight of imagination, and we will tell you how to make a lampshade with your own hands.

Materials

You can create a masterpiece from everything you have at hand: fabric, paper, thread, twine, wire, plastic bottle, beads or beads.

In general, absolutely everything is suitable, even what you usually throw in the trash bag.

Don't believe me? Just look at the photo of the lampshade.

Frame

If you have a frame from an old lampshade, then that's just great.

However, don’t be upset if you don’t find one, because you can create a frame yourself from ordinary wire.

Copper, aluminum, steel - anything that you can independently combine into a single structure will do.

The metal frame of a classic lampshade consists of three rings and six jumpers between them. The small ring is a holder, which is connected by three jumpers to a ring of a larger diameter.

The same, in turn, is connected by jumpers to the last ring. The following photos will help you understand the design.

From fabric

When you have a frame for a lampshade, the easiest way to create your masterpiece is to wrap the base in fabric. For this you will need:

paper (newspaper);
scissors;
textile;
chalk or pencil;
threads

Wrap the frame with newspaper in such a way as to form a pattern out of it. Then transfer the resulting shape onto the fabric using chalk, adding 1 cm to the seam on each side.

Make a pattern, cut off the edges and sew the sides, forming a cover for the base of the future lampshade. We bend the upper and lower edges of the “cover” in such a way as to close the frame rings and secure them with a seam.

Note!

Voila, your lampshade for the floor lamp is almost ready. All that remains is to add a few highlights to your taste, making it unique.

From threads

How to make a lampshade when there is no frame? As easy as pie.

Take balloon without drawings, glue, thread, marker and start creating.

First you need to inflate the balloon and mark on it the upper and lower boundaries of your future masterpiece. Then take the threads and wrap them around the ball, trying not to protrude beyond the marked contours.

Apply glue diluted with water 1:1 to each layer of thread. When the thickness of the wound thread satisfies you, fix the cut edge and hang the ball to dry. After 3-4 hours the threads will dry. Then pierce the ball and carefully detach it from the walls of the finished lampshade.

Leaves and flower petals woven between layers of threads can add additional charm to a thread lampshade.
Note!

A ball decorated with sparkling drops of beads also looks original. In general, watch and be inspired.

From paper

Ordinary sheets of office paper, glossy magazines, a cheap newspaper, an unnecessary book or an ordinary notebook, a paper towel or napkin - these are all future lampshades.

It doesn’t matter whether there is a frame or not, the main thing is that you have scissors, glue and paper. A thousand and one versions of such lampshades can be described with the words “cut and stick”.

The main thing is not to forget a few simple rules:

It is safest to use a paper lampshade together with economy light bulbs, which heat up significantly less than incandescent bulbs;
the diameter of the lampshade should be large so that the paper does not heat up excessively;
for a light room you can make a lampshade from thick paper, but for a dark room you need a thin one that transmits light well;
be careful with color. For example, red or yellow paper will add warmth to the room, green and blue will add coldness.

Well, that's all. Charge yourself with new ideas, arm yourself with the means at hand and move forward to easy changes that will bring warmth and comfort to your home.

Note!

DIY lampshade photo

A chandelier in any room is no longer exclusively a lighting device. It would not be an exaggeration to say that this is the piece of furniture that is the main decoration in any room.

Of course, a DIY chandelier will be especially valuable thing. This will not only highlight the special taste of the home owners, but also their creative mind.

Despite the fact that if you decide to make a lampshade with your own hands for a chandelier, you will need to spend quite a lot of effort, because the process requires special concentration - surely the work time cannot be considered wasted, since the work will bring incredible pleasure and will even leave a pleasant aftertaste, and in the future you will definitely want to repeat this kind of work again.

If you are thinking about how to make a chandelier, then you have probably already seen that today you can use the most various materials and sometimes completely unusual. For example, very often the lampshade for a chandelier is made of wood or glass.

However, if you want something even more incredible, then you can also use cardboard, wooden skewers, and even wine bottles. The choice here depends solely on the ideas that the creator has, as well as on various kinds of wishes of the apartment owners.

In addition, a chandelier from scrap materials must also be created taking into account general interior rooms.

Chandelier made from plastic spoons

Disposable spoons, which most people are used to using exclusively for picnics, can actually also be one of the simplest and yet easily accessible materials for creating an interesting chandelier option for any room.

If you look at a photo of a chandelier of this type, you will be struck first of all by the variety color range, and in the future it will be easy to understand that the material will last a long time.

In addition, in order to create such an interesting piece of furniture, you will need a minimum of financial and material investments.

What materials will be needed?

Any empty bottle made of plastic. The only condition is that its volume cannot be less than five liters.
Any plastic spoons. Their number depends solely on the chosen size of the future chandelier.
Glue that allows you to glue plastic together.
A socket from an old, no longer working chandelier.

The process of creating an original chandelier

Prepare plastic bottle. First of all, you need to get rid of the label and bottom, and also dry it properly.

Remove the spoons from the plastic and use a knife to remove any handles that are not needed. The only thing you need to do is leave a couple of centimeters above the so-called “scoop” level.

Glue the blanks to the base of the prepared bottle. On the “tail” that remains, you need to apply as much as possible. more glue and then press it to the surface.

It is very important to continue to cover the entire bottle in this way directly in a circle until the entire prepared perimeter is “occupied” with plastic spoons.

It is best to arrange them in a classic checkerboard pattern and move them slightly together.

This way it will be possible to reduce the number of “free spots” to a minimum.

The shade is removed from the old prepared chandelier and placed in a dried bottle.
If desired, decorative ones can often be done in a similar way.

That's all. All that remains is to install the chandelier in the chosen location, and also check its operation by connecting it to the power supply.

One more interesting option chandelier is a chandelier with decorative butterflies. It is worth noting that when going to almost any master class on making a chandelier, designers always offer to learn how to create it, which is not surprising, because it can fit perfectly into almost any interior of the room.

Note!

Besides the fact that this option looks truly luxurious and expensive, even a child can do it with the help of an adult, so its popularity is easily explained.