How to make a corner shelf. Do-it-yourself corner shelves on the wall made of wood and glass (photo) What to make a corner shelf from

Corner shelves save space, so this design solution is a godsend for small areas. You can make such a piece of furniture yourself, because this does not require special knowledge, expensive equipment and a lot of time.

Selecting material and tools for the shelf

A do-it-yourself corner shelf can be made from various materials. Consumers very often choose chipboard, MDF or plywood. Another option could be window sill profiles, as well as glass.

The choice of tools depends on the material from which you need to create a shelf with your own hands.

Yes, for wooden models worth having:

• electric jigsaw;
• hacksaw;
• fine-tooth saw;
• drill;
• glue;
• a rack for creating compasses and compasses with a large radius;
• wooden slats for the base of the structure.

If the corner shelf will be made from a window sill profile, then it is worth purchasing the following tools:

• drill;
• hacksaw;
• level;
• self-tapping screws;
• rail to enhance edge rigidity;
• glue "Moment";
• cable channels.

The fewest tools required when you need to make a corner glass shelf:

• a set of holders for glass shelves (there are already screws and dowels here);
• level;
• drill.

When all the materials and tools to complete the work have been collected, you can begin creating the shelves.

How to make a corner shelf?

Creating a shelf and installing it is a fairly quick process. Therefore, in a few hours (or less) you can easily transform a room, which cannot be compared with the time required to create a closet. You can make shelves correctly using step-by-step instructions.

Glass shelf

To make such a shelf, you need to follow these steps:

1. A shelf template is created from cardboard.
2. Glass cutting and processing can be done both at home and in a special workshop. But it is the professionals who will do all the work high level, and the consumer will have the opportunity to choose the most suitable material.
3. Holders are purchased.
4. Next, you need to put the shelf on one of the holders, attach it to the wall and use a pencil to mark the upper limit of its fastening.
5. The first holder is attached using the screws and dowels included in the kit.
6. The glass is inserted into the first holder, secured and put on the second. Using a level you need to level the shelf. Mark the drilling locations with a pencil.
7. The second holder is being attached.

This is a simple way to make glass shelves at home.

Shelf made of window sill profile

The shelf can be given any shape, but you should always remember right angle base that will be attached to the wall.

To build a shelf, follow the instructions:

1. The material is marked.
2. Using a hacksaw, the shelf is cut out.
3. Next, using a special strip, which matches the profile in thickness and length, the frame is strengthened. To do this, you need to place this material on Moment glue and secure it to the edge of the profile.
4. Holes are drilled in the already glued strip.
5. Self-tapping screws are driven into the wall under the holes already drilled in the shelf. A level is used during operation.
6. The open ends of the structure are hidden behind cable channels selected in thickness. They are placed on glue.
7. The shelf is fixed with self-tapping screws.

You can change the color of this design using various adhesive films selected for the interior.

Thus, an ordinary profile can easily turn into marble.

Shelf made of chipboard (plywood, MDF)

Fastening such shelves is done in several ways. The first is to attach it to the longitudinal rail-base, the second is to fix it in the grooves of the transverse base.

The first method is good because there is no need to drill either the tiles or the walls:

1. A shelf is cut out of chipboard. To do this, use a compass to draw a circle, divide it into 4 parts and cut each one with a jigsaw or hacksaw.
2. The location of the shelves and the size of the required groove are marked on the base rail. The blanks are applied to the rail, and their width is fixed.
3. Using a fine-toothed saw, cuts are made to the depth of the middle of the slats, and using a knife, the unnecessary element is removed.
4. On the shelf at the base corner, an area is outlined that needs to be cut out. The area is equal to the depth and width of the groove in the rail.
5. Using a fine-toothed saw, you need to make a cut according to the markings and remove the unnecessary element.
6. Next, the shelves are ground and fit into the grooves is checked.
7. Using glue, the rail must be fixed to the wall, secured with tape and left for at least an hour.
8. Shelves are inserted into an already fixed rail without any other fixation.

In this simple way you can make shelving for the living room, bathroom, kitchen, etc.

To make a shelf using the second method, you must first make the grooves, and only then take on the main element:

1. In two bars, along the length equal in size sides of the shelf, using circular saw grooves of the required width are formed.
2. These elements are attached to the wall using self-tapping screws or dowels. It is necessary to ensure that their caps are completely recessed.
3. The angle is carefully measured. The measurements are transferred to the material, where the outline of the shelf is drawn.
4. The element is cut out using a jigsaw or file.
5. A special tape is used to decorate the edges.
6. When the shelf is completely ready, it is inserted into the grooves.

Just a few hours, and a beautiful decorative element is already in place!

When creating a shelf with his own hands, the master takes into account everything: his ideas, the interior, the features of the corner, where this item will be located.

A corner shelf on the wall successfully copes with the task of saving space. It is relevant in any room, be it a kitchen, hallway, living room or bathroom. The choice of manufacturing material depends on the operating conditions and the prevailing style in the interior.

The variety of design solutions allows you to choose optimal size and the shape of the corner shelf. If among the rich assortment finished products I couldn’t find a suitable copy, so a DIY corner shelf would be a worthy element of the interior.

Material of manufacture

The choice of material for shelves on the wall takes into account three factors. Initially, the operating conditions of corner structures are assessed. The design of the room plays a significant role. The purpose of installing the shelf is also important: will there be light souvenirs and trinkets on it, or will the structure be intended for a large number of heavy books. After analyzing all the components, they come to the final choice.

Characteristics of materials used in the production of corner shelves on the wall:

As you can see, there are many practical and original solutions, what material to choose for the design on the wall. Corner shelves in the interior in the photo below:

Design features and methods of fastening

There are many ways to design corner structures on the wall. The most common models are designed for internal corners.

Comment! Design with external corner design requires individual approach in the manufacture of shelves. This option is appropriate in spacious rooms.

Corner wall mounted shelves amaze with their variety of designs. Simplicity and conciseness are inherent in specimens where one or several small shelves with a rounded edge occupy only a corner. Models that spread out to the sides along the walls look much more interesting. They may be symmetrical or have different sizes, complemented by side walls or maintain minimalism. An example of corner shelves on the wall in the photo:

In addition to wall structures, there are other practical ways interior design. Corner rack with open shelves - functional solution for placing a large number of books or things.

There are multi-tiered models of whatnot type. You are unlikely to achieve space savings with such an interior element, but there is an exclusive design.

The method of wall mounting is chosen taking into account the design of the corner shelf. Small single-level models are fixed with hinges; suitable for multi-tiered products metal corners. Brackets are used when attaching shelves intended for heavy objects to the wall. Glass shelves on forged stands look nontrivial. Will add effectiveness to the interior hidden fastenings when the shelf seems to float in the air.

Creative individuals who value a non-standard approach to solving common problems will like the idea of ​​using belts or chains supplemented with anchor bolts.

Corner shelves: location and purpose

The design and dimensions of the shelf are selected taking into account the functionality of the room. Let's consider possible options interior design.

Kitchen

A large number of small items that should always be at hand will fit perfectly on the compact wall structure. They differ in practicality wooden crafts. This could be a rough model of a “floating” shelf or a more sophisticated one. The design depends on the overall style of the room. Metal, glass and plastic are rarely used in the kitchen. At self-production It is possible to use GVL on the shelf wall.

If in a compact area shelves often perform a practical function, then in spacious interiors they are given a more decorative role. Beautiful cups or small figurines will be a wonderful addition to the decor. Look at the photo how impressive the shelf looks, the outlines of which follow the shape corner cabinets:

Hallway

Manifest creativity When decorating the interior, you can use a corner shelf in the hallway. There are many options for using the design:

• A small shelf on the wall is used to store keys.

• A completely different modification is needed for bags.
• Floor structures reminiscent of bookcases look elegant in a spacious hallway. Usually they are filled with souvenirs and other decorative elements.

• A corner wooden wall shelf can serve as a hanger.

Advice! A corner shoe stand will look harmonious in tandem.

As in the case of the kitchen, products made from wood or its derivatives are optimal for the hallway. The shape and dimensions are chosen based on the area of ​​the room. Corner shelves in the hallway in the photo below:

Bathroom

It’s hard to imagine a bathroom interior without a corner shelf on the wall. This optimal solution to accommodate large quantities cosmetics. It is inconvenient to place jars and tubes in cabinets that should always be at hand.

There are two main manufacturing options - glass combined with a chrome stand or plastic with a metal stand. There is not such a variety of models as in the kitchen and hallway for the bathroom. Laconic design caused special conditions operation. Regular contact with water or just high humidity provokes rapid surface contamination. It is the simple outlines that will help you keep the corner shelf on the wall clean and not spend a lot of time on maintenance.

Advice! It is not advisable to make a shelf on the bathroom wall with your own hands.

Manufacturers in large assortment They offer functional ready-made specimens, which are equipped with all kinds of hooks for washcloths, special soap dishes and have perforations for water drainage.

Living room

Shelves on the living room wall are an indispensable piece of furniture. The range of their use is very wide. Reading lovers will benefit from a spacious corner shelving unit with open shelves. Wall shelves, the size and configuration of which are selected taking into account their purpose, will save free space. A large number of books requires the installation of a three-dimensional structure on the wall. In this case, the reliability of the fastening deserves attention. If a functional piece of furniture serves as a stand for decorative elements, stop at more compact models.

Often icons are placed on small corner shelves. Particularly exquisite are the pieces with carvings and figured wooden details.

No less popular are wall-mounted models designed for indoor flowers. Depending on the situation, choose elegant metal or wooden products.

Corner glass shelves are less common in the living room interior; they are mainly intended for displaying small souvenirs, photo frames and figurines. To maintain an atmosphere of lightness in the interior, you should not place it on an open corner shelf. a large number of things so as not to create the effect of disorder or clutter.

Plasterboard structures look extremely aesthetically pleasing external corners walls Owners can afford such luxury spacious interiors. For compact housing it is important to use LED backlight, which will become an inexpensive and attractive design element.

DIY methods

If you want to make a corner shelf for the wall yourself, you rarely turn to glass and metal. These materials require special equipment and professional skills to work. It is much easier to make a corner shelf from chipboard on the wall.

Advice! You can reduce the cost of purchasing material if you refuse to buy a whole sheet and find a suitable amount of leftovers on sale.

An example of a simple design is shown in the photo:

Step-by-step instructions on how to make a corner shelf with your own hands:

• The work begins with drawing up a sketch of the structure for the wall indicating the dimensions.
• Individual details are drawn on paper or cardboard and then transferred to the base material. The contour is traced stationery knife or a marker.
• The parts are cut out with a jigsaw equipped with a fine-toothed file.
• The fastening points are marked on the parts and holes are drilled.
• The prepared elements of the future corner shelf on the wall are cleared of debris before joining.
• Achieve aesthetic appearance in places of cuts, a special tape will help, which is used to process the edges using a hot iron.
• After pasting the corner shelf parts onto the wall, we begin to assemble the structure.
• The finished product is fixed on the wall. To hide the fastening points, the caps are masked with special plugs matched to the shade of the corner shelf.

The final touch is to arrange your favorite photos and other trinkets on a neat shelf. This is the simplest option for decorating a corner shelf on the wall. Woodcarving masters choose more complex manufacturing options that will amaze with their sophistication and filigree.

When choosing a corner shelf for the wall, we take into account three criteria: installation location, functions, and features of the surrounding interior. Most often, wall shelves are made from wood derivatives due to the low cost of the material and ease of processing. If you want to show your own skills, you can assemble a shelf on the wall of a corner structure yourself.

The problem of free space is always relevant, especially for small apartments. What to do if you want to place your favorite books or children's crafts? Help out corner shelves.

Almost always in the apartment there is an unoccupied free corner in which a rack or small shelf would be perfectly located. This will free up some space and also add a new decorative element.

Materials for making shelves

Today it is difficult to find a house or apartment that does not have shelves. They are convenient for laying out personal hygiene items in the bathroom, arranging books, flowers, kitchen utensils or small crafts and trinkets. The angular position provides great possibilities for designer's imagination when creating various shelf configurations.

Due to their design, corner shelves can save apartment space and at the same time aesthetically decorate the corners.

Today it is possible to choose a corner shelf on the wall for any room. Specialized stores are ready to offer a wide range of shapes and designs from various materials. But the cost of such shelves does not always suit every potential buyer.

Wooden wall hangings have a traditional and classic look. It can be made in a minimalist style, but will still remain attractive.

The corners in the room almost always remain unoccupied, and yet there is enough space there to place a small shelf, rack or hanging. From a design point of view, the angular arrangement provides some advantage, because such articulation of the walls expands the possibilities of using various structural configurations and the fasteners used. If you compare regular and corner shelves, you can immediately notice how much more diverse and attractive the latter look. Let's try to decorate our home with such a corner shelf.

The most popular materials for making shelves are wood, furniture board, MDF, laminated chipboard and so on. Sometimes shelves are made from improvised materials - laminate, plastic or even drywall. Let's not change traditions and use furniture board as a raw material. To work you will need a jigsaw, a drill, various fasteners, a tape measure and a pencil. First you need to make a sketch of the future shelf for clarity of work processes.

The shelf will be about 70 cm high with three sections. It will be fastened through the vertical elements using dowel-nails, and the parts will be connected to each other with confirmations.

The first thing you need to do is mark all the parts on the plate. This is usually done with a pencil, but if the slab has a dark surface, then the pencil mark will not be noticeable; in this case, you can use a knife. You need to use the blade, without pressing too hard, to draw it along the cut line, after which a thin, white, noticeable line will appear, along which it will be easy to cut.

You can use a jigsaw to cut out shelf elements. Saw blade should have a fine tooth and be intended for woodworking. The sawing speed regulator on the jigsaw should be set to the minimum value, and the mode selection knob should be set to “0”. To facilitate the assembly of the shelf, it is necessary to number the parts in the drawing, and then put the corresponding values ​​on the structural elements themselves.

After all the parts are cut, you need to drill holes in them for connecting with confirmations. It's much easier to do this consistently. First you need to make holes in the shelf, and then drill through these holes corresponding to them in the supporting element. If there is no special drill for confirmations, then you need to use 3 ordinary drills with different diameters - for the screw part, the thickening and the head of the Euroscrew.

Immediately at this stage you can make holes for attaching the shelf to the wall. It will be fastened with 6x80 mm dowel nails through the supporting elements. All holes must be countersunk, this is necessary so that the nail head is flush with the surface.

When all the parts have been cut, you can start decorating the edges. First, we clean all edges from dust and sawdust formed during sawing. Then apply to the ends edge tape and using a heated iron (it is advisable to take an old, unused one) glue it to open surfaces.
This type of trimming tape is produced standard width 1.8 mm, and thickness furniture board only 1.5 cm, so part of the tape remains redundant and must be removed. We cut off the excess part of the edge using a regular wallpaper knife.

We clean the resulting edge sandpaper with fine grain. You can close the ends with any other accessible method, for example, use decorative cord, braid, special paper or cardboard.
Now you need to assemble the shelf. We assemble in accordance with the numbered diagram. To tighten the confirmations, we use a hex wrench.
Trying it on assembled structure to the place intended for it and mark the mounting points on the wall. For drilling in concrete or stone walls We use a drill with a pobedite tip. On the tip of the drill, you can pre-mark the drilling depth required for the prepared dowel. To prevent dust generated during drilling from flying around, you can glue a paper “pocket” to the wall under the work area.

After completing the drilling work, you need to insert the dowels into the holes and secure it through the corresponding elements of the shelf with screw nails, recessing the caps. This can be done with a hammer or a regular Phillips screwdriver.

You can decorate the open heads of fasteners using special plastic plugs suitable color.
Perhaps such a shelf will turn out to be too simple in appearance, but we made it from materials that often gather dust in our pantry or live out their days in the country. The design can be changed at your discretion, for example, the supporting elements can be made longer and then the shelves can be used as book shelves. Or choose a different outline of the end parts, in which case the shelf will acquire additional decorativeness. In any case, a hand-made item will serve as an example of the individual skill of the owners of the house.

There is nothing better than shelves for organizing space in rooms, as well as for decorating the interior. Comfortable, functional, original in shape, they help to conveniently arrange a lot of things and give the rooms a more comfortable look. Making shelves on the wall with your own hands is not at all difficult, and you can use a wide variety of materials - wood, fiberboard, glass, pieces of tin, plywood.

Types of Wall Shelves	Description
Classic	This type of shelves is the most common due to its simplicity, aesthetic appearance and ease of installation. They represent a huge flight of fancy: from simple square to creative asymmetrical shapes
Corner	This type of wall shelves differs in the method of fastening - it is carried out on adjacent adjacent walls. Most often they are mounted in utility rooms and bathrooms
Hanging	This original way creating a shelf involves attaching a simple structure to the ceiling using cables or vertical posts
Floor-standing	This wall shelf is a floor support design. This type of product is especially relevant in hallways, as well as large rooms, where you don’t have to think about wasting space
Open and closed shelves on the wall	Wall shelves can be designed, for example, with or without glass

Making a simple wooden shelf

Wood is the most comfortable material for work. Wooden shelves are simple, complex shape, open and closed, vertical, horizontal and angular. Taking as a basis basic version, you can assemble a shelf from several modules and give it the most incredible look. In order for the product to serve for a long time, you should choose the right wood: the boards must be perfectly flat, completely dry, without cracks, voids or traces of mold.

During the assembly process you will need:

• hacksaw;
• drill;
• building level;
• pencil and ruler;
• boards 16 mm thick;
• stain;
• wood varnish;
• sander;
• screws, brackets, dowels.

The example used is a simple rectangular shelf 250mm wide, 300mm high and 1100mm long.

Step 1. Marking

The boards are laid flat on the table and the measurements are transferred from the drawing. The height of the side walls should be 268 mm, since they will be located between the top and bottom: wall height + board thickness x 2 = 300 mm.

Step 2. Cutting the boards

If the markings exactly match the diagram, you can start cutting. It is best to use a jigsaw for this, then the cuts will be perfectly smooth and neat. You should end up with 2 long pieces and 2 short ones.

Step 3. Processing of blanks

Before starting assembly, each workpiece must be sanded, stained and varnished. If you plan to simply paint a shelf, the blanks are processed - this increases their service life and makes the paint apply more evenly.

Step 4. Assembling the product

The bottom board is laid flat on a flat surface. From the ends of the workpiece they retreat 8 mm and carry out 2 straight lines parallel to the cuts. Now on these lines you need to mark two points at a distance of 5 cm from the edge, and drill holes there for the screws. The same is done with the top blank. When all the holes are ready, install the side blanks on the bottom board and tighten the screws. Place a second board on top and also fix the side walls with self-tapping screws.

Brackets are attached to the ends of the side walls, holes are drilled in the wall for dowels, self-tapping screws are inserted and tightened so that they protrude by about 5 mm. The dowels must be positioned strictly horizontally, so before drilling, mark a line using a level. Now all that remains is to attach the brackets to the fasteners and hang the shelf. If desired, the back wall of the product can be filled with a piece of plywood, and glass can be inserted in front.

To be like this simple shelf has become more original; one side wall can be replaced with a stump of a thick branch. To do this, choose an even branch with a diameter of about 7-8 cm with smooth, clean bark, saw off a piece 28 cm long, and cut off all the side shoots. The chock is treated with a primer, dried and varnished. There is no need to remove the bark. After the varnish has dried, the workpiece is inserted between the upper and lower boards and screwed tightly with self-tapping screws.

Based on this drawing you can make various variations wall shelves. For example, reduce the length to 400 mm and make 3-4 blocks at once. Then install them on top of each other in a checkerboard pattern and secure them together using metal plates. Or simply mount them on the wall separately, placing them at a short distance from each other.

Often, to save space, shelves are made corner, and they can be mounted both in the inner and outer corners.

The blanks are made according to the scheme described above, only the upper and lower boards consist of two elements, with the ends cut at an angle. The process of making such a shelf is quite simple:

• the halves of the top board are coated at the ends with glue and clamped with clamps;
• repeat the same actions with the bottom board;
• when the glue dries, all workpieces are covered with stain or primed;
• on the top and lower workpiece mark the fastening lines and drill holes;
• insert the side walls and secure them with self-tapping screws.

Wall shelf materials	Advantages and disadvantages
Wood: plywood, chipboard, MDF and others	This material is relatively easy to work with, it looks beautiful, natural and impressive, its service life is quite long, especially if pre-processed
Plastic	This material is the most versatile; it can imitate both wood and stone, while eliminating their shortcomings
Metal	Such wall shelves will be very strong, reliable and durable, but classic interior They will fit in with difficulty. In addition, corrosion can also be a problem, so metal products required special processing and conditions
Glass	Transparent wall shelves will create an atmosphere of lightness and comfort in your home. Of course, do it yourself glass structure it will be quite difficult, but if you nevertheless decide to do all the work yourself, then you will have to work with the glass for quite a long time and very carefully, especially if various cutouts are planned in the shelf design

Original shelves for books

Shelves of non-standard shape are increasingly in demand, so if you wish, you can try to assemble something original. Used for example bookshelf in the form of a simplified labyrinth.

To make it you will need:

• edged board 20 mm thick;
• wood glue;
• clamps;
• roulette;
• hacksaw;
• miter box;
• Sander;
• stain;
• furniture screws, self-tapping screws;
• decorative shelf holders.

If you have everything you need, you can start making the shelf.

Step 1. Marking

On the prepared boards, mark the cut lines with a pencil under a ruler. Measurements should be taken very carefully, since all horizontal parts have different lengths.

Step 2. Trimming the blanks

The ends of each workpiece are cut at an angle of 45 or 90 degrees. The diagram shows the first option, so you will need a miter box for sawing. It is very important to correctly install the miter box on the board so that the cuts are symmetrical. If the ends are cut off incorrectly, you will not be able to fold the shelf.

Step 3. Assembling the structure

The ends of the parts are smeared with glue, pressed tightly and additionally secured with slotted furniture screws. Ordinary self-tapping screws are not suitable here. Each joint will require at least 2 screws. Both parts of the shelf are applied to the wall, leveled and the attachment points are marked with a pencil. After this, holes are drilled for the dowels, brackets are screwed to the shelf with self-tapping screws and the structure is hung on the wall. Instead of brackets, decorative pelican shelf holders are often used.

Hanging shelf with straps

If you want to decorative shelf for small items, the following option is perfect - a board suspended on straps.

To make a shelf you will need:

• 2 edged boards 300x750 mm, thickness 30 mm;
• 4 leather belt 75 cm long;
• 4 long screws with plastic dowels;
• 4 short screws;
• building level;
• ruler;
• sharp knife;
• drill.

Step 1: Preparing the belts

The cuts of the belts must be perfectly even, so if necessary they are trimmed with a knife. Fold each belt in half, press the ends to the table, step back 2 cm from the edge and drill a neat hole through hole. The same is done with the remaining three.

Step 2. Attaching the straps to the wall

Using a level, two points are determined on the wall at a distance of 60 cm. Holes are drilled and plastic dowels are inserted. The belt folded in half is applied to one of the holes and secured with a long screw - you get a large loop on the wall. Another such loop is attached nearby.

Step 3. Installing the shelf

A sanded board is inserted into the loops and aligned horizontally. To prevent the shelf from moving, the parts of the belts adjacent to the wall near the board itself are screwed with short self-tapping screws. Now another shelf is hung under this shelf, exactly repeating the steps described above. The result is a light and neat two-tier shelf. If desired, you can add another 1-2 tiers.

To make the shelves described above, you can use not only wood, but also plywood, as well as laminated chipboard sheets. The last option is used most often, since laminated chipboard is lightweight, high strength, practicality and durability. When assembling shelves from this material, all sections must be covered with a melamine edge to match the color of the sheet.

Making a glass shelf

Glass shelves fit harmoniously into any interior, and the installation process does not take much time. To work you will need:

• strained glass;
• hammer;
• electric drill;
• building level;
• aluminum profile;
• dowels;
• adhesive tape;
• ruler;
• pencil.

Not everyone knows how to cut glass correctly, and therefore it is better to order the cutting of blanks in a workshop. There they will also grind and polish the edges so that when installing the shelf you will not cut yourself on sharp edges. You can do everything else yourself.

Step 1. Marking for fasteners

The section of the wall where the shelf will hang should be as large as possible. By using building level draw a horizontal line on the wall with a pencil. The locations of the fasteners are marked on the line and holes are drilled.

Step 2. Installing profiles

An aluminum profile is applied to the wall surface and the alignment of the fastening marks is checked. Then insert dowels into the holes, attach the profile with one screw and level it horizontally. After this, tighten the remaining screws.

Instead of a drill, insert a bracket screw
Screw in the bracket screw
Leave the bracket screw protruding from the wall


Checking the position
Arranging the shelves

Step 3. Attaching the shelf

Trailing edge glass shelf cover with adhesive tape. You can use separate spacers made of tape, placing them where the glass will touch the screw heads. The shelf is inserted into the profile, the edges of the profile are covered with protective caps. If two shelves touch on the sides, their edges are fastened with metal fittings.

If there free time and a desire to experiment, you can create very unusual shelves on the wall from scrap materials. For example, a corner shelf made of plastic pipes. To make it you will need pieces sewer pipes and corner cuts. The shelf is attached to the wall with screws and dowels.

Old suitcases and briefcases also make great wall shelves. To do this, they are cut to half their height, covered with plywood at the back and secured to the wall with screws or on brackets.

Drawers from unnecessary bedside tables are quite suitable for making shelves. To give them an elegant look, the boxes should be thoroughly sanded, primed and painted. bright colors. Then they are leaned against the surface with the back wall, the attachment points are marked and holes are drilled for them. Even one such shelf looks very original, and a composition of 2-3 drawers will become a real decoration.

Video - DIY wall shelves

Interesting wooden shelf. Master Class

You will need:

• Rope;
• Board at least 2 cm thick;
• 2 corners (mounts) for shelves;
• Steel washers;
• Lighter;
• Drill;
• Saw.

Return