For any male representative, a good chain saw will be a good thing in the household, regardless of where it will be used at home or in the country. If you need to prepare firewood, carry out construction work, or work on your summer cottage, then a chain saw is an ideal assistant. The main thing is to choose when buying quality tool, which can last long years and will delight you with impeccable work.
When choosing a tool, you need to take into account a lot of important parameters for you, from power to device safety. If the device is required for simple work on the site, then you can give preference to low power, but if serious work is ahead, then it is necessary that the engine power allows for uninterrupted operation. That is, for periodic use a model with a power of 1.5 to 2 kW is quite suitable. For frequent users, you should choose from 2.5 kW and above.
The next criteria for selection are engine location and tire length.
The engine location comes in two variations: transverse and longitudinal. When positioned transversely, the center of gravity of the device shifts; accordingly, this affects ergonomics, since when using the tool you will have to frequently align the cut. The longitudinal placement option is more convenient, but the price of such devices will be higher.
Regarding the bus length, this parameter affects maximum section workpiece sawn in one go. For professional use optimal length from 50 cm to 70 cm. For household needs, a length of 40 cm is quite suitable. The longer the bar, the larger the diameter of the tree it can cut. But at the same time, a large tire has decent resistance to the rotating engine, so the length must match the power.
Also, when purchasing an electric chain saw, look for additional features that can simplify the operation of the tool. These characteristics include the presence of a smooth release, protection against accidental activation, overheating protection and a chain brake.
It is also worth paying attention to the method of tensioning the chain. There are two options here: key and without using wrenches. On the one hand, this is very convenient when there is no need to carry keys with you and you can tighten everything on the saw while working. On the other hand, it is believed that nut tension is safer and more reliable, since the keyless tension mechanism can weaken and fly off during operation.
The best manufacturers
When thinking about which company is better to purchase a tool, you can rely on the name of the manufacturer. The most famous leaders who have proven themselves impeccably in the construction equipment market are Bosch, Makita, Stihl, Skil and the Russian Energomash. The equipment from these leaders is high quality and has a lot of positive feedback online. However, in addition to these brands, you should not lose sight of the less popular ones; the main thing before purchasing is not to forget to study the opinions of people who have already purchased this product.
Having studied the opinions of customers, we have compiled our rating of quality electric chain saws, which will help you decide on a purchase.
Rating of the best electric chain saws for home and garden
This electric chainsaw weighs 4.7 kg and has an average power of 1800 watts. The bar length is 40 cm, and the chain pitch is 3/8 inch. The design of the device is manual, there is only one speed, the engine is located longitudinally. From additional functions there is a chain brake. The bar, chain and saw are easy to assemble. The Makita UC4041A model is made in China, but the quality is excellent. Perfect for a summer house, easy to handle woodworking.
The average price is 7500 rubles.
Advantages:
- Quite light, comfortable to hold;
- High quality plastic;
- Inexpensive consumables;
- Rubberized handle;
- The chain tensioning is keyless.
Flaws:
- The paint on the tire peels off quickly;
- When the chain falls off, scratches remain on the plastic cover from the teeth.
The German model Bosch AKE 40 S is perfect for solving various household problems. The saw will be a wonderful assistant in the garden or on the site when you need to trim trees or saw logs and boards. The saw weighs 4.1 kg, thanks to the handles for both hands, it is comfortable to hold. The average power of the device is 1800 W, the length of the tire is 40 cm. Additional functions include a chain brake. Replacing the chain and adjusting the tension occurs without the use of other tools. During operation, the chain is lubricated automatically.
You can buy it at a price of 7,700 rubles.
Advantages:
- Excellent ergonomics;
- Copes with woodworking;
- Fits comfortably in your hands;
- Light weight;
- Good quality plastic, canvas and chain.
Flaws:
- Low power;
- Short cord.
Stihl MSA 120 C-BQ-AK20-AL101
The dream of any summer resident will be the Stihl MSA 120 C-BQ-AK20-AL101 electric saw. It's good for everyone, the only thing that scares us away is the price. The weight of the model is very low, only 2.5 kg, with a bar and chain. This tool comes with a battery that weighs 1.2 kg, that is, the complete saw will weigh 3.7 kg. The motor is brushless, which saves the charge of the standard 36-volt battery. The saw could be called professional, but the short length of the bar (30 cm) does not allow this to be done.
The price is about 21,000 rubles.
Advantages:
- Reliability and excellent functionality;
- Compact and lightweight;
- Availability of battery.
Flaws:
- High price;
- Chain pitch is 1/4 inch.
If you are looking for a budget electric chainsaw, then you should pay attention to the DE CSE1814 model. The device has a good power of 1820 W and a standard 3/8-inch chain pitch. The length of the tire is 35 cm. The weight of the device is 4.4 kg. The saw is great for working with wood of various thicknesses. When using there is no unpleasant odor, such as from a chainsaw. It is better to work with this device slowly, in the mode of 30 seconds of work and 30 seconds of rest, then the saw will last for many years and will be an indispensable assistant in the country.
The average price is 3500 rubles.
Advantages:
- Budget;
- Works quietly;
- Build quality is excellent;
- Minimum weight;
- Ease of use.
Flaws:
- Low power;
- Short power cable.
Interskol PC-16/2000T
The Interskol PC-16/2000T model has a fairly high power of 2000 W. The length of the tire is 40 cm. Weight is 6 kg. The teeth are located at the base of the chain, so the saw does not jump off during operation and the cut is smooth. The tool easily cuts wood of any thickness, without getting stuck, but working like clockwork. The device has a large handle, which is very convenient for both horizontal and vertical cutting.
There is a protective shield on the body; until it is cocked, the saw will not begin to function. Additional parameters also include chain brake, engine braking, and soft start. The package includes a protective case, a pair of keys, a bar, a chain and a tube of lubricant. Chain lubrication oil is poured through a special plug, below which there are divisions that control the fluid level.
The average price is 5,700 rubles.
Advantages:
- High performance;
- Decent power;
- Security is at the proper level;
- Fits comfortably in your hands;
- An excellent amateur saw that copes well with dacha work.
Flaws:
- Short cord.
The Champion CSB360 model operates on 36-volt lithium ion battery, with a capacity of 2.6 ampere-hours. Also included in the package Charger, which is a definite plus, since you don’t have to purchase it separately. The tool has a 30 cm bar and an Oregon chain with parameters of 3/8 pitch, 1.3 mm width. The chain is adjusted using an ergonomic handle, so you can forget about wrenches. The device weighs 4.5 kg. An additional function includes a chain brake. Suitable for both home and garden.
You can buy it at a price of 12,000 rubles.
Advantages:
- It works very quietly;
- Convenient chain adjustment;
- Excellent cuts;
- Impeccable build quality;
- Reliability is top notch.
Flaws:
- Insufficiently capacious battery;
- Under heavy load, spontaneous shutdown occurs.
Greenworks G40CS30 0
The Greenworks G40CS30 0 chainsaw runs on a 40V battery, but is supplied without one. The charger is also not included. The kit itself includes a tire cover, tire and chain. The tool is quite light (4.4 kg), and fits comfortably in your hands. The length of the tire is 30 cm. There is an engine braking function. The engine is located transversely, making the saw itself quite compact. Compared to the Greenworks G40CS30 chainsaw, the 0 operates almost silently, easily cutting trees up to 30 cm in diameter. This saw is not suitable for professional needs, but it will serve excellently for household work.
The cost is about 8500 rubles.
Advantages:
- Reliability and build quality;
- Compact dimensions;
- Decent autonomy;
- Easy to use.
Flaws:
- This Chinese model is not equipped with dampers between the handles and the body, so vibration is felt.
Model RYOBI RCS36 is gardening equipment increased power, while skillfully combining compactness, lightness and performance. There is battery operation, voltage 36 V and capacity 2.6 A/h. It is located vertically. The chain pitch is 3/8 inches. The length of the tire is 30 cm. The replaceable battery from this device is suitable for any RYOBI tools.
The motor of this model is brushless, the handle encircles the body of the tool so that the tire can be safely held parallel to the ground. The chain is tightened using a ring that contains a flywheel inside that secures the tire. At the end of the battery there is a special snap button for fixation and 4 LEDs. In terms of its characteristics, this model is as close as possible to chainsaws. There is a steel toothed stop.
The average price of the model is 22,700 rubles.
Advantages:
- Compact and lightweight;
- Assembly at a high level;
- Decent battery life;
- Excellent performance.
Flaws:
- High price;
- The chain rotation speed leaves much to be desired.
BISON ZCP-2000-02
The ZUBR ZCP-2000-02 model belongs to budget saws and is inherently one of the good quality saws in the price segment. The power reserve is quite high 2000 W, the chain pitch is standard 3/8 inch. The length of the chain is 40 cm. The tension system is very simple. The chain is lubricated automatically. For safety reasons, the tool has an instant chain brake, which begins to operate when the protective shield is folded back. In addition, the device has a built-in metal stop and chain catcher. The purpose of the saw is to cope with woodworking.
Can be purchased at a price of 5,400 rubles.
Advantages:
- Lightweight and easy to use;
- Works accurately without failures;
- Excellent tension system;
- Minimal vibration;
- Great warranty included.
Flaws:
- Not mobile;
- Not suitable for global tasks such as construction.
Electric saw KRÜGER ECSK 25-40
The KRÜGER ECSK 25-40 electric saw is a compact, powerful and functional tool designed to perform a wide range of tasks. It is used to saw off thick branches and branches of trees, and to process logs, timber and other materials. The Kruger electric saw has increased power – 2500 W. The instrument body is made of durable plastic that is resistant to mechanical damage.
The cost of the electric saw can be checked at.
Advantages:
- light – weight only 5 kg;
- the chain is automatically lubricated;
- there is an accidental start blocking function;
- comfortable to use.
Flaws:
- depends on the electrical network.
Characteristics:
Which electric saw did you like?
Electric chain saws are much cheaper than gasoline ones - they have their advantages and disadvantages. The purpose of electric chain saws is sawing wood:
- caring for trees in the garden or country house;
- felling of small trees;
- sawing logs;
- longitudinal, transverse and oblique cutting of boards, etc.
Electric saws are slower and more environmentally friendly, which compares favorably with their gasoline counterparts. The absence of harmful exhaust gases allows you to use the tool in indoors. Operating and servicing an electric chain saw is also much simpler - plug it in, press the button - the saw starts up, and you can get to work.
The design itself is very simple, the main mechanisms and electric motor are hidden in the housing, the chain tensioner is most often keyless in the form of a regulator. Electric saws also have the advantage in terms of weight; they are very comfortable to work at heights; the load on your hands is almost not felt. Another advantage is cost.
Electric saws are much cheaper than gasoline ones, which is appreciated by summer residents, for whom it is not always justified to pay high price for a chainsaw to stock up on wood for the fireplace once a year, or to trim a branch on a tree.
The disadvantages of electric models are the constant need for a power source, the small battery capacity of rechargeable models and less power compared to gasoline models.
Electric saw Hyundai 
Classification of electric chain saws
Regardless of the manufacturer, electric chain saws can be divided into the following categories according to the method of power supply:
- Electric, i.e. powered from a 220 V power supply via a power cord. These saws are more powerful than battery-powered ones, are easy to operate and maintain, are light in weight and compact in size, are quieter, have improved safety features (protection of the electric motor from overheating, a chain brake that operates in a split second, etc.).
- Cordless chainsaws, powered by a removable battery, do not require connection to an electrical outlet. These are very compact tools with very light weight, they are very convenient to work with, but the battery capacity does not allow for work long time, and the power of a cordless chainsaw is inferior to electric ones.
Battery or electric - the tool can be used both for domestic purposes (for home and garden) and professionally (in construction, for example).
What are the criteria for choosing a good tool?
How to choose the right tool? Which is better: a cheap electric saw or an expensive one? Can a budget option be of high quality and reliable? Price determines quality, everyone knows this, but there are pleasant exceptions to the rule. It is necessary to select a chain saw for the following reasons:
- What kind of work requires a chain saw - if it is fuel procurement, construction work, then it is better to give preference to more expensive models from well-known companies. Conversely, occasional work in the garden does not require special capabilities from the tool, so you can purchase a cheaper saw.
- How often will it be used? The more often the electric saw is used, the higher its class should be, which immediately affects the cost of the garden tool.
- Based on power characteristics. When buying a chain saw, you should very carefully study the characteristics of the tool, familiarize yourself with the functionality and its features. Perhaps some of the characteristics will influence the choice, regardless of the price or class of the instrument.
- Assessing your budget.
Selection of electric saws according to power characteristics
The main characteristics by which a hand-held power saw is selected are as follows:
1. Electric motor power.
The performance of the saw, sawing speed, depth of cut, and service life of hand tools depend on this parameter. The greater the power of the electric motor, the more professional the tool, the faster the cutting, the longer the bar can be installed on the electric saw.
Take into account the features of your electrical network, if frequent power surges have been noticed - pay attention to a more powerful saw unit; the increased power reserve will protect the engine from overheating during a sudden drop.
In addition, the powerful electric motor, which is equipped with professional and semi-professional chain saws, allows the operator to increase the duration of sawing without stopping. If a household tool needs to be stopped every 10-15 minutes of work, then professionals can easily endure 45-60 minutes of work without a break. When choosing, it is important to consider that the greater the power of the electric saw, the greater its weight.
2. Hand saw weight.
Electric chain saws, in comparison with gasoline sawing units, are inferior in weight to the latter. They are compact and lightweight, rarely any model exceeds 5-6 kg, making them indispensable when performing high-altitude work, when the operator has to work with an electric saw with almost no weight.
3. Length of the saw bar.
This parameter determines the thickness of the wood that your saw can cut. The size of the tire directly depends on the power; the higher it is, the larger the size of the guide. The most common tires are 35-45 cm (household and semi-pro), but some manufacturers of professional tools have equipped their units with tires from 50 to 90 cm.
4. Security settings.
- chain brake - a special guard with a lever that is activated when a kickback occurs and stops the rotating chain almost instantly;
- blocking against accidental starting - the motor starts when two keys are pressed - the start and locking ones; if you hold the handle and accidentally press the start button, the saw will not start until the second button is pressed.
5. Chain pitch.
Determines the cutting ability of the tool and the quality of the work performed. A saw chain consists of links; the pitch is the distance between three adjacent rivets connecting the links to each other. Electric saws are equipped with chains with pitch:
- 0.325 inches - a low-profile chain included with inexpensive household electric saws; they are distinguished by accurate cutting, reduced vibration levels, but softer chain material, which quickly fails;
- ¼ inch - a low-profile chain for cheap household electric saws, just like the previous one, it is distinguished by its softness, but it allows you to accurately cut wood, leaving an even, neat cut;
- ⅜ inch is the most common chain used by most manufacturers on professional and semi-professional chainsaws. The chain is more powerful, can withstand heavy loads, and is characterized by high productivity, but lower cutting quality.
6. Position of the electric motor in the housing.
There are two types of electric saws:
- with longitudinal placement of the electric motor - lightweight compact saw tools, ideally suited for work at heights (trimming crowns, roofing work, etc.), are inferior in power to saws with a transverse electric motor; kickback often occurs when starting;
- with a transversely mounted engine - more bulky saws, the center of gravity is shifted, there are no losses when transmitting power to the chain, there is no kickback when starting, they are reliable, faster and better-quality cuts.
7. Chain tension.
Companies that produce electric saws produce tools with two types of chain tension:
- key - using the appropriate tool - less convenient, but more reliable way stretches;
- keyless - by turning the knob, thumb, lever - a safe and convenient way to tension.
8. Availability of a soft start system.
When starting the electric saw, a large current passes through the motor, causing the chain to jerk, leading to a kickback. To avoid this, systems were installed that reduce the load on the electric motor and gradually accelerate the chain.
9. The volume of the oil tank, the presence of an inspection window in it.
The larger the oil tank, the less often the operator will have to add lubricant. The inspection window allows the owner to visually monitor the fullness of the oil tank.
10. Availability of adjustment of lubrication supply by the oil pump.
More powerful electric saws are equipped with an adjusting screw that allows you to increase or decrease oil consumption.
11. Duration of continuous operation.
For household tools, the duration of continuous operation should not exceed more than 10-15 minutes, and a break in work should last the same amount. Semi-pro and pro tools can work without a break for more than 45 minutes at a time.
12. Battery life.
This parameter is typical for cordless electric saws, mobile and not connected to a power source. Manufacturers produce batteries with voltages of 8 V, 16 V, and less often 32 V. Battery capacity can vary from 2 to 4 Ah. On average, the battery lasts for 45-60 minutes of operation, depending on the intensity.
We offer short video a review where a specialist explains the main criteria for selecting electric saws, regardless of the manufacturer.
Review of the TOP 10 manufacturers of electric chain saws in 2018
In 2018, the most popular electric chain saws were the following brands:
- Stihl.
- Makita.
- Husqvarna.
- Bosch.
- Champion.
- Huter.
- "Interskol".
- Oleo-Mac.
- PATRIOT.
Stihl
German Stihl electric saws are professional, high-performance sawing tools, characterized by economical lubricant consumption, convenient, well-thought-out design, and reliable components and mechanisms. Saws can withstand long-term loads.
Some advantages with only one disadvantage - high cost, both for the saws themselves and for consumables and equipment.
Makita
Japanese Makita electric chain saws also belong to the professional line; they have a well-thought-out design, are perfectly balanced, durable, have keyless tension of the chain mechanism, a friction clutch gently transmits torque, and a built-in soft start system. The start button is locked, thanks to the double insulation of the electrical wiring, electric shock is completely eliminated - safety is at its best.
The only disadvantage is the use of original chain oils, the supply system is unregulated, access to the electric motor and all the “stuffing” is difficult.
Husqvarna
Good Swedish professional electric saws, the motor has a longitudinal design, high cutting speed, security system, keyless chain tensioner, low level noise, in general - ergonomic high-quality design.
The disadvantage is the high cost of the power tool; in addition, owners complain about the inconvenient location of the oil tank cap.
Bosch
Another German brand that consumers love for its power tools, which, although they cost a little less than Shtilev’s, do their job very well. Electric chainsaws of this brand are equipped with a powerful electric motor, equipped with overload protection and a soft start system. The cutting speed and accuracy are high, the chain tension is keyless, and tires of various sizes can be mounted if necessary. Very quiet, equipped with ergonomic handles and chain brake.
Among the disadvantages are that only original chains and tires are used, the tires are ultra-thin, they bend if used improperly, and the price is above average.
Champion
This American company produces not only corded power tools, but also cordless ones. Cordless chainsaws received the highest ratings from consumers due to their excellent power characteristics, reliable assembly and lithium-ion battery, the battery and charger are included in the kit (this is rare). The saw is small in size and weight, ergonomic, completely autonomous, and inexpensive, considering complete set(presence of charger and battery).
As a disadvantage, owners highlight the excessive noise of the chain saw and the small battery capacity, which lasts no more than 20 minutes.
Huter
The German brand produces high-quality household power tools, including chain saws, which are distinguished by their inexpensive price (about 5 thousand rubles), reliability, and safety. The saws are equipped with low-profile chains, perfectly balanced, noise and vibration are minimized, comfortable handles with pads. Built-in protection of the electric motor from overheating, double insulation.
The disadvantages are: instrumental chain tension and short-lived equipment, which can be replaced without problems.
“Interskol”
That's domestic manufacturer entered the TOP ten. Electric saws are much cheaper, but no worse than imported analogues, which not everyone can afford to buy. Interskol electric saws have an ethnogonomic, balanced design, are equipped with a soft start system, noise and vibration are reduced. Low-profile equipment is used, with convenient access to the chain tensioner.
Equipment owners do not speak very well of the original headset - the chain quickly dulls and stretches, the tire is too thin and quickly fails. You can replace the equipment without any problems; the saws have a standard mount for many headsets.
Oleo-Mac
The Italian manufacturer produces very reliable electric saws that can even handle hardwood. The security system is duplicated, electric motor protection, excellent wear resistance.
In all respects, Oleo-Mac produces excellent chain saws, the only drawback is that the chain tension and adjustment are not very convenient.
PATRIOT
This American company produces power tools that meet all existing standards security. Electric saws are distinguished by high reliability, maintainability, extended service life, and good power characteristics.
As for complaints, owners complain about the rapid wear of the gear in the gearbox and the not very convenient tension system.
DDE
An American company produces inexpensive electric saws at Chinese production sites that can satisfy the needs of the owner of a private home or summer house. Chain saws are equipped with powerful electric motors and have standard systems safety (inertia brake, start button lock, motor overheat protection, soft start, etc.).
But the oil supply system to the chain is a little undeveloped; after a long period of non-use, problems with lubricant supply may arise, and the operator will have to tinker.
Rating of the best electric chainsaws of 2018
These power saws received the highest consumer ratings in 2018:
- Stihl MSE 250 C-Q-16.
- Makita UC4530A.
- Husqvarna 420EL.
- “Interskol” PC-16/2000T.
- Oleo-Mac 17 E-16.
- PATRIOT ESP 1816.
| Model | Power, W | Tire length, cm | Chain pitch | Automatic chain lubrication | Weight, kg |
| Stihl MSE 250 C-Q-16 | 2500 | 40 | 3/8 | + | 5.7 |
| Makita UC4530A | 2000 | 45 | 3/8 | + | 4.4 |
| Husqvarna 420EL | 2000 | 40 | 3/8 | + | 4.7 |
| 1800 | 40 | 3/8 | + | 4.1 | |
| Champion 420 | 2000 | 40 | 3/8 | + | 4.7 |
| Huter ELS-2000P | 2000 | 40 | 3/8 | + | 7.4 |
| “Interskol” PC-16/2000T | 2000 | 40 | 3/8 | + | 5.7 |
| Oleo-Mac 17 E-16 | 1600 | 40 | 3/8 | + | 3.9 |
| PATRIOT ESP 1816 | 1800 | 40 | 3/8 | + | 5.8 |
| 2410 | 45 | 3/8 | + | 4.7 |
Let's move on to brief overview the models listed above and consideration of their technical characteristics.
Electric chain saw Stihl MSE 250 C-Q-16
The electric saw weighs 5.7 kg and is equipped with a powerful 2500 W electric motor, powered from the mains. The electric saw is equipped with a soft start system with a built-in starting current limiter; the electric motor is reliably protected from possible overloads. The oil tank is made of transparent plastic and has a special lid that opens without intervention. additional tool.
Electric chain saw Makita UC4530A
Electric chain saw Husqvarna 420EL
| Basic | |
| Manufacturer | Husqvarna |
| Manufacturer country | Sweden |
| Nutrition | Network 220V |
| Engine location | Longitudinal |
| Tire length | 400.0 (mm) |
| Chain pitch | 3/8″ |
| Chain speed | 14.5 (m/sec) |
| Oil tank volume | 180.0 (ml) |
| Weight | 4.7 (kg) |
| Guarantee period | 12 (months) |
| Characteristics of the electric motor and battery | |
| Power consumption | 2000.0 (W) |
| Additional functions | |
| Chain brake | Yes |
| Starting current limitation | Yes |
| Keyless chain tension adjustment | Yes |
| additional characteristics | |
| Dimensions of packaging | 605/244/25 (mm) L/W/H |
| Electric saw class | Domestic |
| More | Oil level indicator. Adjust chain tension without tools. Electronic softstart system Softstart™ |
| Uniqueness | Yes |
| Chain lubrication | Automatic |
| Equipment | Electric saw, bar, chain, instructions, warranty card |
| Bar groove width, mm (inches) | 1,3 |
| Engine power, W (hp) | 2000 (2,72) |
| Type | |
| Noise level | 102 |
Bosch AKE 40 S electric chain saw
An excellent tool for both home and professional use. The electric motor with a power of 1800 W is located longitudinally in the housing. The oil tank is equipped with an inspection window and a built-in strainer; lubricant is supplied by an automatic oil pump. The inertia brake will stop the chain from rotating in a matter of seconds.
Champion 420 electric chain saw
The ergonomic design weighs 4.7 kg (without equipment) and is intended for home use. The chain saw has a 2000 W electric motor (longitudinal placement); access to the brushes is simplified through a special hole without the use of tools. The motor starts with a push-button, there is a start button lock button. Double insulation will protect you from electric shock.
The oil tank is equipped with a fill sensor. The rubber-lined handle has a hook for convenient holding of the wire. There is a chain brake and an oil pump to lubricate the chain. The equipment consists of a 57-link chain and a 40 cm guide. We offer.
Huter ELS-2000P electric chain saw
Household power tools weighing 7.4 kg are used in construction and household. Electric motor power is 2000 W, there is overload protection. Chain lubrication is supplied automatically. For safety reasons, the saw is equipped with a chain brake with a protective guard. The equipment includes a 40 cm guide and a 57-link chain. We offer.
“Interskol” PC-16/2000T electric chain saw
| A country | Russia |
| Manufacturer's warranty | 2 years |
| MAIN CHARACTERISTICS | |
| Type | Electric |
| Engine location | Longitudinal |
| Power, W) | 2000 W |
| Tire length | 40 cm |
| Chain pitch | 3/8″ |
| Max chain speed | 14 m/s |
| Number of links | 57 |
| FUNCTIONS | |
| Chain brake | Eat |
| Automatic chain lubrication | Eat |
| Protection against accidental activation | Eat |
| NUTRITION | |
| Power type | Net |
| Oil tank volume | 0.085 l |
| EQUIPMENT | |
| Tire | 1 PC. |
| Chain | 1 PC. |
| Protective cover | 1 PC. |
| DIMENSIONS AND WEIGHT | |
| Height | 19 cm |
| Depth | 26.5 cm |
| Width | 55.5 cm |
| Weight | 5.7 kg |
| Color | Black gray |
Electric saw Oleo-Mac 17 E-16
| Manufacturer | Oleo-Mac | |||||||||||||||||||||||||||||
| Engine power, kW | 1.6 | |||||||||||||||||||||||||||||
| Tire length, mm/inches | 400 / 16 | |||||||||||||||||||||||||||||
| Chain pitch and link thickness | 3/8 | |||||||||||||||||||||||||||||
| Number of links, pcs | 57 | |||||||||||||||||||||||||||||
| Chain brake | Eat | |||||||||||||||||||||||||||||
| Automatic chain lubrication | Eat | |||||||||||||||||||||||||||||
| Weight, (kg) | 3.9 | |||||||||||||||||||||||||||||
| Guarantee | Tire length, see read and download instructions for PATRIOT ESP 1816 read and download instructions for DDE CSE2418.
| Operating time with battery AK 30 1) | up to 55 min |
| Operating time with battery AK 10 1) | up to 18 min |
| Operating time with battery AK 20 1) | up to 40 min |
| Battery type | Lithium-Ion COMPACT |
| Rated voltage | 36 V |
| Equipment | with battery AK 20 and charger AL 101 |
| Tire length | 30 cm |
| Weight 2) | 2.7 kg |
| Vaga | 2.3 kg |
| Oil tank volume | 110 cm³ |
| Sound power level 3) | 94 dB(A) |
| Vibration level left/right 4) | 3.4/3.2 m/s² |
| Rollomatic E tire, length | 30 cm |
| Chain pitch | 1/4″P |
The compact tool weighs only 2.5 kg, the electric motor is powered by a lithium-ion battery with a capacity of 3.3 Ah and a voltage of 36 V. The chain tension is tool-free, there is a chain brake and automatic lubrication. Tires 30 cm long are mounted. The battery and charger are included in the kit. We invite you to read and download the instructions for the Stihl MSA 120 C-BQ-AK20-AL101
The electric motor is located transversely, the chain tension adjustment is keyless. 30 cm tires and 47-link chains are mounted. There is a chain brake and the oil supply to the chain is automated. The kit includes one battery + charger. The comfortable rubberized handle provides a secure grip. We invite you to read and download the instructions for Champion CSB360.
We suggest that you familiarize yourself with a small video rating, perhaps this will help right choice and choose the tool for yourself.
For those who want to communicate live with current owners of equipment, we suggest visiting various forums, where you will learn about the problematic and trump points of a particular model of a particular manufacturer.
Today we will take a closer look at the main types of circular saws. Let's decide on reasonable criteria for choosing a specific model. We will draw conclusions for recommendations based on the experience of practicing builders and service center employees. Join us.
The electric circular saw (popularly “circular saw”, “parquet”) appeared in the twenties of the last century. As usual, several “organizations” contributed. First, a radial-cantilever type of wood cutting machine was developed (by Raymond DeWalt), and a little later they began producing it under the Skilsaw brand. manual models(Sullivan and Mitchell). There were also separate patents for side-drive and integrated saws in the name of A. Emmons and A. Steele, respectively. Well, the AEG company helped “land” the invention and promote it to the masses, whose engineers were the first to connect the instrument to a common 220-volt network. Nowadays, the circular saw has reached perfection; the set of options and auxiliary systems for it has not changed for a very long time, not to mention the design features. It’s just that everyone is slowly moving towards the premium class.
A circular saw is considered one of the most technically complex tools, and this does not even take into account that it may have a full set of available electronic bells and whistles. The fact is that here it is necessary to constructively provide unprecedented safety measures (like all disk machines, “parquets” can be very traumatic), as well as to implement high precision of many spatial mechanical settings. DIY repair Circulars are considered to be a risky business due to the difficulty of restoring the correct factory settings.
The main purpose of a circular saw is to perform longitudinal cutting of wood and its derivatives (OSB, chipboard, fiberboard, MDF, plywood), because this tool holds the line perfectly; a jigsaw cannot be compared here. Naturally, cross cutting for a circular saw will not be a problem either. But it would be strange if a modern cutting unit was not sharpened to work on other materials. Indeed, using various types of disks, and in some cases changing the shaft rotation speed, it is possible to cut laminated workpieces, gypsum fiber board, plastic various densities, multilayer materials (sandwiches), slate, plexiglass. In short, almost all sheet panels can be cut perfectly, including at an angle to the main plane. The only thing that the circular machine cannot handle are dense mineral materials (concrete, brick, plaster). True, some units can be equipped with a diamond disc and have a water supply; structurally, these are full-fledged circular saws (Makita 4101RH). There is still one ironclad “but” - a circular saw cannot cut along a curved line.
What is a metal circular
Separately, it is worth highlighting circular saws for working on metal. Although they are positioned on the market in this way, they are essentially multifunctional. The point is more in the characteristics of the standard wheel, which comes as standard (this is not an abrasive, it is a carbide toothed multi-purpose disk). Such units can easily deal with pipes, tin, complex profiles, sheet steel and stainless steel (Makita 4131). The conversation is very simple with both steel and soft non-ferrous alloys (based on copper, aluminum).
What about angle grinders? Compared to grinders equipped with a cutting wheel, we have the following:
- Productivity is significantly higher.
- The operator is unloaded as the machine rests on its sole.
- Reduced noise and vibration levels.
- It is possible to work at a bevel.
- There are no sparks, the workpiece hardly heats up and does not “burn.”
- Increased safety (the equipment is almost completely hidden and is not subject to rupture).
- The service life of a carbide disc is approximately 100 times higher than that of an abrasive.
- The cutting price is the lowest (only the guillotine is cheaper and faster).
- There is no release of mineral dust into the air, like from stone equipment.
- The cut is very high quality, without burrs.
Our craftsmen have only just tried this device, but in Europe and the USA such machines are in full use, quite naturally, with such and such advantages. For example, the EVOLUTION 230 XTREME model cuts sheet steel (class A-3) with a thickness of 12 mm, profiles/pipes with a wall of 4 mm, and, of course, everything else (wood, polymers).
Plunge circular saw
Another class of circulars - plunge saw. It is designed for cutting into the workpiece anywhere, not just from the edge. There is no lower automatic casing completely, and the disk is located above the base plate and is lowered only when the “start” button is pressed. Naturally, the cutting depth is adjustable, often within a range of just millimeters (DWS520K).
The submersible mechanism (something similar is implemented in wall chasers) allows you to carry out local roof repairs, dismantle several selective floorboards, and cut an opening in the countertop. You can make grooves, slots, and gutters without much difficulty. For correct work with sandwiches and laminated materials — upper layer it is possible to cut through a preliminary pass to an incomplete depth of the workpiece, thereby eliminating the risk of chipping. All this is done not only perpendicular to the plane of the part, but also at a variable angle.
Cordless circular saw
Just recently, such units seemed like pure fantasy to us. But time passes, wireless technologies are reaching a new level. Batteries have become so capacious, special motors have become so economical, and chargers have become so fast that even for such a powerful tool as a circular saw, the developers have managed to organize an uninterrupted power supply. We take two modern batteries and charge for half an hour - that’s it, there will be no problems with energy (Makita BSS 610 RFE). It's even easier if your circular saw has a generic battery from the same manufacturer as the rest of your tools. The power characteristics (output power, torque) of wireless circular saws are in no way inferior to those of similar networked machines - Bosch GKS 18 V-Li (cutting depth 51 mm). Well, as for mobility and ergonomics, here they are beyond any competition, they are especially loved by roofing operatives who work at heights.
Main selection criteria
Power, speed, blade diameter, cutting depth
Cutting disc diameter (outer, not size mounting hole) - we can say without exaggeration that this is the main parameter of the circular saw. Based on it, manufacturers are forced to assemble a specific model. The larger the disk, the more powerful the motor must be in order to spin it up to required speed, the more torque is required to maintain this speed and avoid jamming, the more technologically advanced the stabilization system must be so that there is no beating, vibration and noise, the heavier, larger, and more expensive the saw will be. But on the other hand, large equipment allows you to saw more massive workpieces and thicker material.
However, it is not enough to simply pay attention to the size of the circle; it is much more important to have an accurate idea of the maximum cutting depth. Developers almost always indicate these parameters in the passports, both for perpendicular and beveled cuts. There is some conditional division:
- Light class (40-50 mm) - sheet materials, work “on site”.
- Middle class (50-65 mm) - the most common and universal.
- The heavy class (65-140 mm) is a massive, purely professional machine.
The convention is that many companies issue their own special classification (Makita, for example, does not produce very young children and is moving a little forward in this matter). It turns out that we, ordinary users, can only listen to our needs and choose a priority in the ratio of “maneuverability/versatility/strength”, based on the specifics of the intended work. For example, Hitachi C13U (weight 13 kg, 335 mm disk, 2000 watts) and Hitachi C6MFA (weight 3.4 kg, 165 mm disk, 1010 watts). The ratio of straight cut depth for these models is 128 mm to 57 mm, respectively.
Left: Hitachi C13U, Right: Hitachi C6MFA
I would also like to note that in case of emergency, you can cut a very voluminous part by making a cut on both sides (yes, for correct operation, the disk does not have to pass through the workpiece).
What else does power reserve provide? If there is a need to compare two circular saws with the same depth, then a stronger motor of one of them will provide better frequency stability, longer continuous operation time, and will allow faster cutting of denser material. Watts under the hood are traditionally correlated with the diameter of the equipment and, again conditionally, units are classified into one of three corresponding classes:
- Up to 800 W.
- From 800 to 1200 W.
- More than 1200 W (for example, Hitachi C9U2 - 2 kW, Makita 5143R - 2.2 kW).
Disk rotation speed - what does it give, besides the speed itself? There are two main nuances. First, the faster the shaft moves, the cleaner the cut is (although the cleanliness depends more on the type of disk - the number and shape of the teeth). Second, high speed is the opposite of torque. Third, high speed means high temperature, and some plastics may begin to melt during sawing. If frequency has become a stumbling block (read “choice”), then you need to compare saws with the same cutting blade diameter. Even better, find a model with idle speed control.
Electronics on guard
Advanced circular machines are stuffed to the gills with electronic systems. This is quite predictable, since this tool is powerful and dangerous - the user needs help so that the mission is not impossible. If you have the financial opportunity, you shouldn’t give up additional options; there are no unnecessary little things for performance and safety.
For the benefit of the correct speed mode, a system works to maintain a constant spindle speed under load, the so-called constant electronics (DeWalt DWS520K). A special controller constantly reads the speed and when there is a local drop in speed (for example, when the feed is accelerated or when the equipment hits a compacted area of the material), it is stabilized by automatically increasing the outgoing power. The likelihood of the disc jamming is reduced to almost zero, and the quality of the cut only improves. Obviously, this requires a certain power reserve (this is the prerogative of relatively large machines). Another point is the idle speed adjustment, preset. It is needed for manual selection of process parameters for materials with different physical characteristics (Metabo KSE 68 Plus). Not all models can boast of this option. And by the way, the preset option is not prerequisite for the presence of constant electronics, the only available frequency can be stabilized.
In order not to overload the network when turning on the tool, since the starting currents, although in a short period of time, significantly exceed their nominal value - almost all more or less powerful circular saws have a soft start system. The equipment does not accelerate immediately, which eliminates tool jerk and protects gearbox parts from unnecessary shock loads; the unit lives much longer (Fiolent PD 3-70E).
If the operator is in a hurry to finish what he started and does not listen to the “well-being” of the circular saw, then the overload protection system will receive a signal from overheated motor windings or react to a sharp drop in energy consumption and turn off the power, preserving the functionality of the expensive tool.
The electrodynamic brake brings the disc to an abrupt stop once the start button is released (AEG BKS 18). The system is designed to protect the operator from possible injury, the part from damage, and the machine from kickback.
Mechanical Features
If the equipment jams tightly, the motor can fail very quickly, and there is a possibility of a kickback. To protect against such trouble, a slip clutch is used. The motor shaft will continue to rotate even when the disk is stationary. Don't worry, the system doesn't work unnecessarily.
Protection against accidental activation is realized by installing an additional button in the area of the main handle. To supply power to the motor, you must press it simultaneously with the start button (Skil 5064AA). It is perhaps completely impossible to make such a chord unintentionally, especially since the “fuse” is usually recessed in plastic. Often (for other instruments) this button allows you to lock the trigger on, but this will not work here - the toothed disk must always be under control.
To make it easier to replace the disk, the spindle can be locked with a button or lever, in some models literally in any position (no need to scroll to find the setting point - Bosch GKS 65 CE Professional). If there is no lock, you have to use two keys at once. The nut itself can be tightened with a wrench/screwdriver, or it can be made in a “tool-free” version - quick-clamping.
A lot of the functionality of a circular saw depends on its base plate. Note that it is on it that all mechanical adjustments and fastenings for auxiliary elements. Traditionally, platforms made by casting light alloys are considered to be of higher quality. They clearly indicate the professional class of the tool, since they retain their geometry well (Interskol DP-235/2000M). However, do not discount platforms made of thick stamped steel. They are more resistant to shock loads (they do not crack from an accidental impact), have a smaller impact on the price of the product, and are also used in tools for professionals (Bosch GKS 65 CE Professional).
"Interskol" DP-235/2000M
An important point is the adjustment of the bevel cut. Sawing at an angle is realized precisely by changing the position of the platform relative to the entire upper part and the disk in particular. Usually the slope is set at different angles: 30°, 45°, and in some machines it is extended to 50-55°. The mechanism for setting the cutting depth is also located here. As a rule, this is all made in the form of grooves shaped like a quarter circle (in some cases graduated) and rods with wing/lever clamps. The main advantage of high-quality control elements is the speed, reliability and accuracy of fixation (Kress 1400 HKS). Backlashes are extremely unwelcome guests here.
Another advantage of a well-thought-out platform is the ability to install the saw in a stationary position. This refers to the option of creating a machine without using a special table. This point will be relevant for all cars, but even more so for particularly powerful and heavy ones.
To perform high-quality straight cuts, circular saws are already equipped as standard rip fence By the way, it also comes in light alloy. However, the greatest accuracy of sawing work can be achieved by using a guide bar. The tire is purchased separately (they are often suitable from other manufacturers), but there must be a special groove on the sole. If you need to work “by hand” along the markings, you need to control the line; for this, a special slot opening is made in front of the base plate. An interesting option is implemented in the EVOLUTION 180 XTREME saw, where a laser line builder is built into the handle; during operation you only need to combine it with the marking.
A mandatory accessory for a circular saw is a spring-loaded casing that completely hides the disc and releases it only when cutting begins (an emphasis on the workpiece is required). The casing should move easily and always return to its original position. To prevent the disc from being squeezed from the sides by the already cut material and not being locked, a “riving knife” is used in the design.
Ergonomics and something else
A circular saw is a hand-held tool, so when choosing, you need to pay special attention to the overall ergonomics of the product. Interestingly, some manufacturers even produce left-handed instruments with a mirror design.
The most important role in the comfort of any circular saw is played by the shape and location of the handles. Obviously, each user will have different requirements. The most questions are raised by the front handle, which is most often straight, located perpendicular to the plane of movement of the saw blade. This design is good if you work forward, but most often the tool is held from the side - so most craftsmen prefer the mushroom-shaped version, which is easily held in any position (DeWalt D23620). For some, a bracket-type design (DeWalt D23650K) may be more suitable.
Give preference to models with rubberized handles; they help to securely hold and control the tool while working.
It won’t hurt to hold a few circulars in your hands before purchasing; most likely, a lot will become clear to you regarding the weight distribution of specific cars and their balance. Be sure to do this if you plan to do a lot of local work.
Check out your visibility working area, specific design features circular saws have a very serious impact on this circumstance. It is important how effectively sawdust is removed from the disk. Here, surface airflow is used (directed from the operator), a pipe is integrated for connecting an industrial vacuum cleaner and connecting a bag. There are options with a dust container.
Take a look at how the power cord entry point into the instrument is made. Unfortunately, users very often cut the power cable, so it is better if it is directed strictly back, and the input sleeve is as long and rigid as possible. Maximum freedom and safety will be provided by a long power cord - 4 meters is no longer uncommon for professional models. Otherwise, you will have to regularly struggle with the extension cord.
Sooner or later, the circular saw will require replacing the carbon brushes, otherwise the motor armature is at risk. Therefore, it makes sense to “monitor” this node as well. It’s good if there is a separate window for quick access to the brushes, then you don’t have to disassemble the case, or send it to service for this if the device is under warranty. An excellent option is self-switching brushes: if the graphite wears out, the chain breaks (Sparky TK 70). Next nuance is to indicate the status of the brushes; this is a very useful gadget for a traditional brush assembly.
Most likely, you will not be allowed to test the saw under load, but if the seller allows it, plug the saw into the mains and run it at idle speed, listen to the level of noise and vibration. Evaluate how strong the air flow is generated by the tool - this largely determines the efficiency of motor cooling and the quality of cleaning the work area from debris.
If you plan to work with a circular saw only from time to time, then pay attention to hobby-class models from well-known manufacturers (Bosch PKS 55 A, Black&Decker CD601). They are designed for relatively short work (15 minutes work - 15 minutes rest) for no more than 4 hours a day. This will be quite enough for home use, and you will be able to save a lot. Ironically, household models often outlive their professional counterparts, and developers provide them with a double warranty (2-3 years).
In general, carefully predict the load that the circular saw will receive while at your disposal, and based on this, select the characteristics of the model you are looking for. We hope we have provided you with enough food for thought.
An electric chain saw is an effective tool for cutting wood and requires less effort and time than hand saw. Unlike a chainsaw, it does not produce toxic exhaust. Therefore, they are used both in professional woodworking and summer cottages. When choosing a saw, the main quality that is required from it is the ability to provide high performance over a long service life. The Marka.guru portal presents a rating of the best electric chain saws with the highest reliability for 2018.
To choose the right electric chain saw, it is recommended to evaluate models according to the following criteria:
- Power. A more powerful and productive tool can cope with large diameter trunks and withstand high loads.
- Engine location. Most models have a transverse design, which is convenient when working in a vertical plane. The saw is larger and inconvenient in confined spaces. With a longitudinal position, better balance is achieved and more straight cut. In addition, better maneuverability is ensured.
- Locking systems. Ensure safe operation of the device. Activate instant chain stop in case of a rebound, as well as protection against accidental activation.
- Prevent overheating. When unacceptably high temperatures are reached, the power supply is disconnected.
- Soft start function. When starting the engine, the speed increases gradually, which extends the life of the device.
- Adjusting chain tension. Impacts performance and safety. Changing the tension can be done using a screw and a screwdriver, or using a nut and a slider. The second method is simpler and does not require additional tools.
- Lubrication. A good saw should have a chain lubrication system, which is a special pump that ensures uniform lubrication of the bar during operation.
1
The leader in the ranking of the best electric saws is the Makita model. Has a 40 cm tire and a chain of 56 links. Despite the transverse arrangement of the engine, it is comfortable and maneuverable, and has a rubberized handle. The chain tension is very easily adjusted with a special lever. There is an accidental activation lock and anti-rebound protection. The body design is balanced, the weight is not too heavy for instruments of this class. The noise and vibration produced correspond to modern European standards.
Technical indicators:
- 1800 W;
- chain pitch 9.3 mm;
- 200ml oil tank;
- 800 rpm;
- cable 0.3 m;
- 4.7 kg.
Advantages:
- power;
- ergonomics;
- ease of setup;
- relatively light weight.
Flaws:
- requires regular maintenance.
The average price is 7500 rubles.
Prices :
2
In second place is a European-assembled electric saw from Bosch. Characterized by a reliable transverse engine, robust housing and modern locking system. According to the proprietary classification, it is suitable for medium-sized trees and moderately complex garden work.
The proprietary Bosch-SDS system allows you to adjust the tension and remove the chain with just one hand without the use of any additional tools.
Technical indicators:
- 1800 W;
- tire 40 cm;
- 200ml oil tank;
- chain speed 9 m/s;
- weight 5.4 kg.
Advantages:
- high-quality assembly;
- reliable engine;
- ergonomic handle;
- safety of use.
Flaws:
- sensitive to overheating, not intended for high loads.
The average price is 7800 rubles.
Prices :
3 Champion 420
In third place in the ranking of the best electric saws is the Champion model with a longitudinal engine. Ideal for work in garden house, sawing building materials, cutting down small and medium-sized trees. Thanks to the longitudinal arrangement of the motor, the model is maneuverable, it is easy for it to trim branches and trim bushes. Operational safety is ensured by double insulation, switching lock and chain brake.
Thanks to the external location technical unit You can easily change the motor carbon brushes without using special tools.
Technical indicators:
- 2000 W;
- tire 40 cm;
- 101 dB;
- 57 links;
- 250ml oil tank;
- 4.7 kg.
Advantages:
- light weight and maneuverability;
- high power;
- safety.
No deficiencies were identified.
The average price is 5400 rubles.
Champion 420 prices:
4
The fourth place in the ranking is occupied by the Husqvarna cordless electric saw. There are configurations with and without a battery, and there is also a proprietary charger. The model is characterized by a fairly low noise level, so it can be used near and even inside residential premises. The chain tension can be easily changed without the help of additional tools.
A distinctive feature of the model is high performance batteries. They work continuously for up to 45 minutes and charge in just half an hour. In addition, they are universal and fit any model of electric saw of the brand.
Technical indicators:
- transverse brushless motor;
- operating speed 15 m/s;
- 200ml oil tank;
- battery 3000 mAh;
- 2.5 kg.
Advantages:
- compactness;
- a light weight;
- wireless operation;
- good performance.
Flaws:
- high price.
The average price is 21,000 rubles.
Prices :
5
In the middle of the rating is a powerful Daewoo brand model with a transverse engine. It has a self-start locking system, a chain stop function and a durable shock-resistant housing. It is characterized by a low noise level and fairly light weight. The tension level can be changed without additional tools thanks to the SDS system.
A special window allows you to monitor the lubricant level in the oil reservoir in real time.
Technical indicators:
- 2500 W;
- tire 40 cm;
- 230ml oil tank;
- 57 links;
- 6 kg.
Advantages:
- high power;
- does not heat up well;
- simple mechanism for changing tension;
- low price;
- low noise level.
Flaws:
- uncomfortable handles without soft pads.
The average price is 5400 rubles.
Prices :
6
The rating continues with the lightweight and compact DDE electric saw. Due to its low power, it is suitable for simple tasks such as trimming branches, trimming hedges, and preparing firewood. Eat standard set safe operation, including accidental start-up blocking and chain brake. The chain is automatically lubricated during operation.
Technical indicators:
- 1820 W;
- tire 35 cm;
- 90ml oil tank;
- 14 m/s;
- 104 dB;
- 4.4 kg.
Advantages:
- quiet operation;
- low cost;
- good power;
- a light weight.
Flaws:
- noisy;
- unreliable chain adjustment mechanism.
The average price is 4000 rubles.
Prices :
7
The Oleo-Mac electric saw can be used to cut hardwood and medium-sized branches. The brand is characterized by high reliability and ease of use. Operational safety is guaranteed by a double inertia brake, and the metal clutch increases service life and wear resistance.
Thanks to the ratcheting chain mechanism, the chain slips when jammed and provides additional protection for the electric motor.
Technical indicators:
- transverse engine arrangement;
- tire 40 cm;
- 1800 kW;
- 200ml oil tank;
- 3.9 kg.
Advantages:
- high power and speed;
- durable and reliable motor;
- durable body;
- light weight.
Flaws:
- inconvenient tension adjustment system.
The average price is 9500 rubles.
Prices :
8
The MasterYard electric saw has high power and a longitudinal arrangement of the electric motor. The small body allows you to work in inconvenient narrow spaces. The tool copes well with hard rocks and medium-sized branches. The metal stop, star and coupling guarantee a long service life and high wear resistance. MasterYard has an automatic oil supply system and overheat protection.
A special feature of the model is an electrodynamic engine brake with additional coils. The chain stops almost instantly after removing the start button.
Technical indicators:
- 2000 W;
- tire 40 cm;
- 150ml oil tank;
- 4.1 kg.
Advantages:
- high performance;
- reliability and wear resistance;
- safety;
- low noise level;
- light weight.
No deficiencies were identified.
The average price is 9,000 rubles.
Prices :
9
In ninth place in the ranking of the best electric chain saws is another model from Oleo-Mac. Both models are very similar, but the 17 E-16 has less power and also has overheating protection. The saw is also characterized by its relatively light weight and dimensions, making it a good choice for the garden.
Technical indicators:
- 1600 kW;
- tire 40 cm;
- 200ml oil tank;
- 4 kg.
Advantages:
- high reliability;
- safety;
- build quality;
- good performance.
No deficiencies were identified.
The average price is 8500 rubles.
Prices :
10 Monferme 20237M-1
The TOP 10 is completed by the Monferme cordless electric saw. This lightweight, convenient and safe electric saw from the French brand is designed specifically for women. It is distinguished by its stylish bright design and ergonomics. Comes with accumulator battery and charger. The oil tank has transparent walls, which allows you to constantly monitor the oil level. The handle and lock button are soft covered. Time battery life is a full 40 minutes.
The innovative DIGIPRO BRUSHLESS brushless motor produces 50% less vibration and 80% less noise than petrol models. In addition, it is 20% lighter and starts without problems at any time of the year.
Technical indicators:
- battery 4000 mAh;
- 200ml oil tank;
- tire 40 cm;
- 5.2 kg.
Advantages:
- wireless operation;
- bright design;
- a light weight;
- reliability and safety;
- capacious battery.
Flaws:
- high price.
The average price is 16,000 rubles.
Prices for Monferme 20237M-1:
Conclusion
When choosing a power saw, you must first of all be guided by the purpose of use. For simple gardening work, it is recommended to purchase more compact and lightweight models. For example, battery-powered ones, which do not depend on the ability to access electrical outlet. But they have a high price and are not suitable for large volumes of work. It is advisable to purchase a special extension cord for powerful, productive electric saws. For tree trimming, it is better to choose from models with a vertical motor, as they are characterized by good maneuverability. With a transverse arrangement, lower power losses and high performance are ensured.
Sooner or later, every owner of a summer house or private farmstead decides to buy a chain saw. Whether to choose a gasoline or an electric chain saw depends on many factors. We will talk about electric saws, layout, use, maintenance. The choice of tool is yours.
Scope of use of a chain saw
Where they used to use a hacksaw, like a knife cuts wood with butter reciprocating saw. The sawdust is small and you can work in close quarters. A bow saw and an ordinary two-handled saw will be replaced by a chain saw, electric or gasoline. If the work involves felling timber and cutting ridges in the forest, there is no alternative, only a powerful gasoline professional tool to help you.
Gasoline saws are more expensive, they are not connected to a network, they work noisily and at the same time they also pollute the air with exhaust.
How to choose electric chain saws for household work:
- sawing logs into logs;
- cutting boards, slabs, timber, wood waste;
- formation of tree crowns.
If there is mains electricity, street work will not cause disturbance to neighbors. Cutting with an electric saw can be carried out in a closed space, there are no exhaust gases. One taboo is that working in damp conditions or in the rain is strictly prohibited. Which electric chain saw to choose in terms of power and layout depends on its purpose. If you have to work occasionally and for a short time, you need to buy a saw for household needs. If woodworking is a profession, you will need a different tool.
Manufacturers of construction tools
The companies Bosh, Stihl, and Champion have long been leaders in the production of chain saws. Their products are more ergonomic and easier to use. Which electric chainsaw should an amateur choose? We recommend the Champion brand, decent and inexpensive.
But the introduction of innovations, interlocks, and electronics is developed as know-how on these sites. The choice of chain saw is not limited to the listed companies. Following the famous brands, the companies Interskol, Zenit, Forte, Efco mastered the production of saws and achieved good results, this is not a complete list of manufacturers. You should know by what indicators to choose a tool.
Technical parameters of electric saws
Motor power is the determining factor when choosing an electric chain saw. When working outside the city and in the country, there is no guarantee that the network has a stable 220 V. The tool cannot work on full power, overheats and may fail prematurely. Therefore, you need to use a stabilizer or buy more powerful device. The more powerful the saw, the more expensive and heavier it is.
The layout of the housing depending on the location of the engine. Take a closer look at the outline of the saw. If the product is narrow and long, the engine is located along the axis, the balancing is excellent, you can work tirelessly for a long time. A universal device due to the longitudinal arrangement of the engine. An installed adapter conical coupling increases the cost of the device by several thousand
With a transverse arrangement, the saw becomes shorter with the same bar length. This is an amateur version of the instrument. It cuts wood and everything from top to bottom perfectly. Such a compact device is convenient for professionals to work with, assembling truss structure. Which chain saw to choose based on the layout needs to be decided, keeping in mind that a rip saw will last 2 times longer.
Do not use electric tools outdoors in wet weather. Always hold the saw with both hands. Do not be distracted by conversation while sawing, be attentive.
The longer the bar, the thicker the log the saw will cut. It will cost more. For household use the best option canvas 30-40 cm.
For comfortable safe work you need the following equipment:
- chain brake;
- engine overheat protection;
- soft start;
- engine brake.
You cannot buy a saw if it is not equipped with a lock to prevent accidental activation. This is counterfeit!
If you plan to build a house made of round timber, then you should also have an electric saw in your arsenal. Each tool is designed for its own sector of work. How to choose a corded chain saw:
- After choosing a model, ask if there is one in your area service center for product maintenance with consumables and spare parts. Read reviews not about the company, but about the performance of your brand’s tool. Make sure that the instructions are not a photocopy, but a normal printed copy.
- The saw should lie comfortably in your hands and not cause discomfort;
- The more powerful the electric saw, the greater the hope that a voltage drop will not interfere with work.
- A mid-range farm saw is the most reliable option, intermediate between a professional and an amateur. Electric saws are cheaper, easier to operate and allow you to work in a closed circuit.
Please note that the engine may overheat due to increased load. The reason is that the oil does not penetrate to lubricate the chain. It is necessary to check the supply of oil to the chain and its level before work and during the process. Checking the feed is easy - position the cutter along a strip of newsprint or cardboard and start the saw. If microsplashes from the chain have left an oil ray on the newspaper, it means oil is flowing. Use recommended or mineral oil.
Before work, check all fastening bolts and the oil level in the tank. If the saw is taken out from cold storage, it must lie at room temperature for at least 2 days so that the condensation from the windings evaporates.
It is believed that a sharp chain determines the operation of the saw. At first the saw enters the wood without effort, then you begin to lean on it. You just need to sharpen it special device, needle file or file. If you don’t know how to sharpen, install a new one, and hand this one over to the knife sharpener at the nearest kiosk.
Remember, a dull chain is not only a strain on your hands, but also on the engine! During long breaks in work, store the chain in oil.
Choosing an electric chain saw - video
| In contact with: |