Ceramic border for bathroom on tiles. Bath border: types, selection tips, installation instructions

Bathroom renovation after completion of the main work moves into the installation stage important elements, without which the overall picture will be incomplete. Such details include finishing with a border, otherwise it is called a plinth or a corner.

If the word border is not found on the package, but says “ceramic fillet,” then you need to keep in mind that this is the professional name of the product.

Ceramic finishing will add stylistic completeness to the bathroom and emphasize the thoughtfulness of the interior design.

Varieties

Ceramic borders– a high-quality product, strong and durable, which is a special corner for sealing the joint between the bathroom and the adjacent wall.

The warranty period is at least ten years. Modern hardware stores offer wide choose color palette and design, shape and configuration of ceramic borders, allowing you to choose the right format for any bathroom interior.

Manufacturers are striving to improve models of ceramic skirting boards to expand the scope of application and functionality.

Today, there are three main types:

Pencil

It is a thin and curved strip. On outside decorative texture. Curbs are designed to handle narrow and long gaps, as well as visually delineate elements.

Corner

The most common type, representing a model for sealing joints with a medium-sized gap. Wide selection of designs, colors, decor. Facing tiles can be supplied with a ceramic corner.

Frieze

A combined version of a tile and a corner, in the form of a kind of overlap to cover the joint. Unfortunately, it is less common than traditional forms.

The versatility of many modern borders is manifested in installation not only on the finishing finishing material, but also on a rough basis. Manufacturers have thought through elements for convenient, aesthetic and reliable joining of parts: stars for corners and plugs for edges.

– the most vulnerable to water ingress. Efforts to install the container end-to-end are useless; the appearance of a gap is inevitable. Sealing cracks to prevent the appearance of fungus and mold is the main task of curbs. High humidity due to the accumulation of dampness - a threat to all bathroom interior items, especially to metal plumbing parts.

Another task– providing an aesthetic appearance that allows you to visually evaluate the adjacent walls, sides and bathtub as a whole. Ceramic modules can be a design highlight in the overall style of the bathroom.

Advantages and disadvantages

Choosing ceramic modules means giving preference to quality and durability, since this is the main advantage, but there are others:

Use in areas with wide gaps, where the use of other models is not possible.
Specifications, which do not allow reaction to humidity factors, temperature changes or cleaning compositions based on chemical reagents.
High resistance to deformation from the external environment.
Maintaining the original appearance during the period of operation.
Ecological cleanliness natural material.
Possibility to choose from a single collection with finishing tiles.
Wide range of colors, texture and decor.

The disadvantages include the following features:

Low resistance impact force.
Difficult to install.
ABOUT regarding high price products.

It is worth noting that with careful and careful attitude, the purchase costs will quickly pay off, since there will be no need to replace or restore the ceramic corner for many years.

Characteristics and dimensions

An alternative ceramic finishing may be self-adhesive tape or a plastic corner.

What unites these varieties is the factor of temporality. The tape border is made of polyethylene and is easy to apply, but the rapid loss of functionality and appearance negates its advantages. The average service life is one year.

The plastic corner is also easy to install, lasts longer, but loses its attractiveness: it turns yellow from dampness. Main disadvantage– does not guarantee the tightness of the joint. The presence of narrow cracks allows moisture to accumulate behind the bathtub with all its consequences.

Ceramic border will provide:

Complete protection against moisture getting outside the bath.
Maintaining appearance.
Durability of use – from 30 to 50 years.

Before visiting a hardware store, you need to take measurements along the perimeter of the bathroom (2 or 3 sides) in order to calculate the number of ceramic elements needed to seal the joint. The resulting result will need to be divided by the length of one module and rounded towards a larger integer.

You need to buy 3-4 more pieces, since during installation, during the fitting process, rejected parts inevitably appear due to unforeseen situations.

The dimensions of pencil borders are usually 15 mm in width and 20 cm in length. Standard dimensions of a ceramic corner are: 20 cm for length, 5.5 cm for height and depth.

Installation

Border under tiles

It is customary to use two main methods for installing ceramic modules:

Under the tiles. This method is applicable at the renovation stage, when the walls have not yet been tiled.
On the tile. Installation is possible both before and after wall cladding; it is allowed as restoration work if necessary.

In shape, ceramic modules can be convex or concave, they can be included in the kit additional elements in the form of plugs for edges and junction corners.

Many people believe that the installation of a ceramic corner should be trusted to professionals. This correct solution, but if you wish and have experience, you can handle tiles yourself, subject to careful study of the technology.

To work you will need the following:

material in the right quantity;
tile adhesive, 1-2 kg;
silicone sealant for waterproofing the gap, with antiseptic (50 ml tubes, 3 pcs.);
polyurethane foam(with wide gaps between the wall and the bathroom);
masking tape;
putty knife;
emery block;
pliers;
Bulgarian:
gun (may not be useful if the sealant is in a tube);

Step by step guide:

Surface preparation. The walls and the bathtub need to be wiped, then the joint around the perimeter should be degreased and dried thoroughly.
Apply a layer of sealant using a gun or from a tube, in an even layer. Use a spatula to even out the application line, remove excess with a sponge dipped in water. For wide gaps, the sealant can be replaced with polyurethane foam. Possible voids should not be left so that water does not subsequently get there.
Glue preparation. It is recommended to strictly follow the instructions. The glue should have a consistency similar to thick sour cream; it should not slide off the spatula.
If the border elements could not be prepared in advance, then this stage needs to be made up. If necessary, you need to prepare modules cut at an angle of 45 degrees. This can be done with a grinder or pliers. The cut line should be sanded with an emery block. The corners must be processed so that when connecting, the gap is minimal.

This work may not be required if there is a corner blank for the ceramic border:

It is recommended to lay the border from the corners. Use a spatula to carefully apply glue to the back of the border and press it against the wall. Excess glue should be removed. Application should be as dense as possible. Can be used rubber mallet for careful alignment of parts.
After complete drying, after a day, use sealant to seal the smallest cracks.
Upon completion of work, it is recommended to generously water the border and corners to ensure the strength of the adhesive.

If you plan to attach borders to tiles, the process will be much simpler:

Waterproof glue (liquid nails) should be applied to the grease-free tiles on the wall. The curb should be pressed firmly to adhere to the adhesive.
It is advisable to use a building level for work. It is recommended to remove excess glue in a timely manner.
After hardening, use grout putty to treat all seams.

The cost consists of several main indicators:

Material of manufacture.
Manufacturer country.
Available complete with facing tiles.
Color and texture(white and smooth are always cheaper).

It should be noted that ordering in an online store is more profitable than in a construction supermarket, but many people prefer to hold the product in their hands before purchasing in order to feel it in reality.

Cost of one white ceramic corner standard size – from 30 rubles, color – from 40 rubles.

Adviсe:

Before adding a border sticker, prepare special plastic crosses to maintain the gap between the modules of the same width.
Grouting joints between border elements, must be done with the same grout composition as for facing tiles.
Ceramic mosaic helps with complex geometric lines, since small elements help preserve even oval lines.
Carefully prepared and executed work will undoubtedly be crowned with success.

Ceramic bath border provides reliable protection joints from water leakage. It is used to bridge the joint between the bathtub and the walls. In addition, installing a border smoothes the transition from the tiles on the walls to the bathtub, making the design of the room more pleasant and neat.

Note! If you use a bathtub without a baseboard, water will leak into the joints. Due to dampness, mold and fungi will begin to grow, which release spores that are harmful to the human body and an unpleasant odor.

Peculiarities

Compared to plastic skirting boards, ceramic ones have more positive qualities:

Environmentally friendly and safe, they do not emit hazardous compounds when the temperature rises;
Resistant to many chemicals, including solvents, cleaning liquids and cleaning powders;
Durable, wear-resistant and non-flammable;
Easily tolerate temperature changes without changing size or shape;
They do not absorb water, as they have a low water absorption coefficient, thanks to a special coating (enamel, glaze).

Unlike plastic borders, ceramic ones can last more than 15 years. Plastic skirting boards enough for no more than 1-2 years, depending on their quality. Ceramic borders do not change their color throughout their entire service life and are not afraid of high temperatures. They can be cleaned with hard sponges.

The main disadvantage of ceramic skirting boards is their fragility. If a heavy object falls on the curb, it may split or become cracked.

Types and sizes

There are several types of ceramic bath skirting boards:

Pencil;
Angular;
Frieze.

The pencil is a thin ceramic strip cylindrical With outside. It is used to cover very small cracks or only as a decorative element. For example, a pencil is used to divide a room into zones or to outline one element with it. Available a large number of diverse different colors this curb. The length is most often 20 cm, and the width is no more than 1.5 cm.

The corner ceramic plinth has a triangular cross-section. It fits snugly both to the wall of the room and to the bathtub. This type is most often used to close joints. Plain, multi-colored, flat or voluminous skirting boards are available.

Length 20-25 cm, width 3.5-5.5 cm. Some manufacturers produce skirting boards with pre-beveled edges - for easy installation at corners. In other options, borders are equipped with small corner elements - stars, or they need to be purchased separately. There are also plugs that cover the edges of the baseboards.

Frieze – ceramic border, whose width is standard tiles. Skirting boards are produced in different colors, corrugated, including those decorated with patterns or designs.

How to calculate the required amount and what to cut with

To find out required amount ceramic borders, you should measure all sides that you plan to decorate with them. Having calculated the perimeter (by adding the lengths of all sides), it must be divided by the length of one plinth. The result obtained is rounded up.

Note! Since the curb may be accidentally damaged during transportation and installation due to its fragility, it is better to purchase a few more pieces (2-4).

You can cut the desired length or angle using a grinder with diamond blade or pliers. The cut is made with reverse side baseboards. When using the first option, the cut will be even and smooth, and there will be practically no need to grind it sandpaper or grinder.

Use pliers to carefully bite off small pieces. Then the edge is smoothed out. When working with this tool, you must be extremely careful not to damage the entire baseboard.

How to make a corner

For finishing corner zone You need two borders with one side cut off. To make a corner on the plinth, an even cut is made from it at an angle of 45° using a grinder with a diamond blade. After which it is rubbed down with a grinding machine or sandpaper. Ready-made corners are also sold.

How to attach and what to glue on

Note! The installation of borders can be carried out either on top of already installed tiles or before they are laid.

Step-by-step instruction for installing ceramic borders under tiles:

The walls and bathtub are cleaned of dirt, degreased and wiped;
Markings are made along which ceramic borders will be laid;
After everything has dried, silicone sealant is applied to the joint using a gun. Use a spatula to level it and seal the remaining small cracks;
To glue ceramic borders, glue is used that is resistant to mold and mildew. It should be diluted according to the manufacturer's instructions;
Laying ceramic skirting boards begins from the corner. They are adjusted as close to each other as possible so that the joint is minimal. The glue is applied to the back side of the border with a spatula. After installation, the protruding solution is immediately removed;
To make the borders fit closer to the wall and to each other, they are carefully tapped with a rubber mallet;
The same plastic cross is placed between the baseboards, which will be used when laying tiles;
After installing the tiles and borders, all seams are grouted with the same solution.

Guidelines for installing ceramic borders on tiles:

The wall and bathtub are cleaned and degreased;
Once everything is dry, the joint between the wall and the bathtub is sealed with silicone;
It is recommended to attach borders to the tiles using liquid nails. Apply the adhesive to the back side of the baseboard, then press it firmly against the wall;
End caps are installed on the edges;
After installing the borders, the joints are treated with transparent silicone sealant.

Note! Before filling the joint with sealant, the bathtub and tiles on the wall should be sealed masking tape, since it will be more difficult to remove the sealant later.

Can it be glued to an acrylic bathtub?

You can install ceramic borders on any bathtub, including acrylic ones. For installation, you need to use silicone sealant (aquarium), but under no circumstances use grout, as it will crack.

What is the price

Prices for ceramic borders from different manufacturers:

How to remove a ceramic border from a bathtub

If glue with a high degree of adhesion was used to install the borders, then you can remove the baseboard using a small chisel and hammer. First, the seams are cleaned, and then the border is chipped off. If it is necessary to remove all the baseboards, then start from the edge.

You can also use a cement remover. It contains inorganic acid, which cleans surfaces of cement, gypsum, lime. At the same time, it does not damage the surface itself.

You can install ceramic borders yourself. This will be especially easy for those who already have experience in laying tiles, since installing skirting boards is done in almost the same way.

If this is not taken into account, then fungus and mold will constantly form in the bathroom. To avoid such troubles, in this article we will look at how to glue a ceramic border to a bathtub made of different materials.

For people who appreciate solidity and reliability, borders made of ceramics and stone were developed that fit perfectly into the interior of bathrooms. Although it is customary to entrust this work to specialists, it is quite possible to glue the corner and border yourself.

It is important to consider the following points:

Dimensions of sanitary tank and bathroom. These parameters will affect the scale of the borders. For example, if you have a small bathroom, then choose a low and narrow border, visually enlarging the bathroom.
Choosing the texture and color of the tiles. The border can be either smooth or textured, having concave and convex shapes.

But such borders must have the same texture and color scheme, in harmony with the plumbing of the entire bathroom.

The required number of elements for a ceramic border is not difficult to determine. You just need to carry out some activities:

Using a tape measure, measure all sides of the bathroom touching the wall, then add up all the results.
Divide the resulting amount by the length of one unit of the product, rounding up to the nearest whole amount.
Add up to 10% to the resulting number of borders (if breakages and damage occur), usually this is no more than four units of a ceramic module.

When installing a ceramic border you will be helped by:

ceramic modules;
laser level;
waterproof tile adhesive or liquid nails;
silicone sealant (containing components that prevent the development of fungi and mold);
mounting gun (for silicone sealant);
emery block;
rubber spatulas;
Bulgarian;
diamond discs;
pliers;
stationery knife;
masking tape;
grout.

Perhaps all of the listed tools will not suit you, but if you are doing this work for the first time, then the prepared materials and tools will help avoid unnecessary delays in work.

Initially, the surface is cleaned of various contaminants and remnants of old ceramics. Next, the edge of the sanitary container is degreased with a solvent, after which it is disinfected with chlorine. By the end preparatory work The entire perimeter of the bathtub must be dried and covered with masking tape around the edges.

Installation of borders from ceramic tiles before facing the walls, it is performed in the following sequence:

Using a construction gun, carefully, without pausing, fill the cracks between the bathtub and the wall with sealant. It is better to use silicone sealant designed for aquariums.
Use a rubber spatula (or fingers moistened with water) to even out the layer of sealant as much as possible, thereby preventing moisture from getting between the seams. If the gap is larger than 0.5 cm, then fill such seams with foam.
While the sealant or foam hardens, you need to prepare the adhesive for the tiles (it is not advisable to glue it to silicone , because then your borders will not stick tightly to the wall), the consistency should be like thick sour cream.
If the corners (stars) could not be purchased in advance, you can prepare in pairs, four parts with an angle of 45°. To adjust, you will need a grinder with a diamond disc or pliers, biting off unnecessary part, sanding the cut with an emery block.
Use a laser level to adjust the angle to 6–8°. For example, if the width of the curb is 50–60 mm, then its edge adjacent to the wall should be erected 0.5 cm higher. When gluing the border to the wall, start from the corner, work towards the back side of the tile, and apply glue using a spatula. After that, glue is applied to the back of the border using a spatula and the ceramic product is glued to the wall.
The subsequent parts are placed tightly to each other, while removing excess glue by tapping with a rubber mallet.
The surfaces of the borders should be wiped with a damp cloth, allowing it to dry for up to 10 hours.
After about a day, the borders must be filled with water to strengthen the adhesive and left until completely dry, thereby preventing the appearance of microcracks. To close the gap between the curb tiles and the wall, apply silicone or acrylic sealant. They also use tone-on-tone grout based on water-repellent latex, which is used after laying the tiled border.

In order for a ceramic border to look good, you need to leave a gap of the same size using special construction crosses (asterisks). In addition, the ceramic border laid between the wall and the bathtub is folded in pairs, as this will guarantee an accurate fit of the materials, leaving minimal gaps at the joints.

Borders on ceramic tiles

It’s easier to install a border on a tile:

First you need to clean the surface of both the ceramic tiles that are already installed and the bathtub. After degreasing them, you can begin gluing the borders.
After this, treat the entire surface of the wall with moisture-resistant glue. It is better to use liquid nails.
Then, taking the ceramic corner, press it against the wall as hard as possible (until the liquid nails set), since this determines whether moisture will get between the bathtub and the wall or not.
Treat all seams with products that prolong the service life of ceramic borders.

When attaching borders to tiles, use a level. Remaining glue should be removed before it dries.

You can also glue other types of borders to the tiles.

This type of border is easy to install and has long term service, but due to the fact that it is fastened with liquid nails or sealants, cracks appear that allow moisture to pass through. Thus, the main function of such borders is decorative. In addition, plastic can be damaged by mechanical stress and may also become dull.

This tape is quick to install and does not require much effort. This is a sealing tape made of polyethylene. Happens different widths and heights. Although it has a self-adhesive base, it is still necessary to use silicone sealant when installing it.

This type of border quickly loses its attractive appearance, and after some time it needs to be replaced. Suitable for temporary protection against moisture and leaks.

Such borders are made of granite, marble or travertine. Perfectly creating a special atmosphere and sophistication in the bathroom. If your choice fell on this type of material, then the bath itself should be made of the same material as the border, which can last for many decades.

If the work is done efficiently, then such a border will last for many years, without causing any trouble in operation, and also pleasing to the eye with its aesthetic appearance. We hope that the tips and instructions in our article will help you complete the task efficiently.

Video

In the provided video materials, you can familiarize yourself with the intricacies of installing a border on a bathtub:

Or a corner, for a bathroom, is a plate that covers the joints between the edge of the bathtub and the wall, thereby preventing water from flowing during bathing. The importance of the border is very great - by preventing moisture from entering behind the bathtub, it thereby prevents the formation of fungus, mold and the proliferation of bacteria.

Varieties

There are 3 types of ceramic sides:

Pencil

A thin long strip of a slightly convex shape. Designed to cover narrow gaps. It comes in different colors, sizes 20cmx15mm, 25cmx15mm.

Corner or "corner"

Designed to cover the junction of 2 even strips of border on a bathtub, located at an angle of 90°. Made in the shape of a triangle. It comes in a variety of colors, making it easy to match it with other types of corners. Has dimensions 20cmx5.5cm, 25x5.5cm.

Frieze

Wide strip, has a length equal to the width of the tile. Laying a frieze requires certain skills, such as laying tiles. The sizes are different.

Advantages of ceramic products:

High strength indicators.
Sustainability to deformation.
Doesn't change color during operation (unlike the plastic “opponent”).
Stable to exposure to moisture.
Environmentally friendly material.
Aesthetic appearance.

Minuses:

Quite fragile(may break if a heavy object falls on them).
They have no flexibility.
Difficult to install.

Preparation for installation

Before starting work on installing the sides, you must:

Prepare the base.
Take measurements.
Prepare porcelain strips.

Foundation preparation includes:

Cleaning and degreasing the surface, on which the curb will be attached.
After that, the surface should be wiped dry with paper towels (not a rag) or best dried with a hairdryer.

This completes the preparation of the foundation.

Taking measurements is very simple:

We measure the total length all walls in contact with the bathroom.
Now what happened, must be divided by the length of the corner and the result rounded up.
The resulting figure will be accurate, but to be on the safe side, it’s better to add a few more pieces in case of damage during the installation process.

Next, we prepare the curbs for installation. To do this, you need 2 straight elements that will be joined in the corner, cut with a grinder with a diamond disc or pliers at an angle of 45°. After this, sand the cut surface with an emery block.

What you will need during the installation process:

sealant (spray foam or silicone);
sealant gun;
grout;
border elements (straight, corner and tips), taking into account the margin;
grinder with diamond blade;
putty knife;
pliers;
emery block;
roulette;
rubber mallet;
waterproof glue (for example, liquid nails);
building level;

Installation

There are 2 ways to install a porcelain corner:

Under tiles:

Then into the gap between the wall and the bathtub Apply a layer of sealant (if the gap is wide, use polyurethane foam, if narrow, use silicone).
Using a spatula distribute the sealant evenly over the entire surface of the gap and joints, remove excess.
Prepare tile adhesive using the instructions supplied by the manufacturer. The consistency of the glue should resemble sour cream so that it sticks to the spatula, but does not crack or roll off.
Now let's start laying the borders themselves. The process starts from the corner. Apply a layer of glue to the back side of the side with a spatula and press it to the surface of the bathtub and wall.
Excess glue needs to be removed.
Side you need to press as evenly as possible.
Further, install the remaining elements in the same order.
After installation Treat all edges and joints between elements with grout.

On tile:

Prepare for installation– prepare the surface and take measurements.
Then to the surface on which the side will lie, apply a layer of liquid nails and wait for the time recommended by the manufacturer.
Before applying glue It is very important to use a building level.
After that, starting from the corner, tightly press each element of the side to the tile from one corner, and to the bathtub from the other corner. We wait a while for the glue to set.
Then, it is necessary to treat the joints between fragments of borders with grout.

After the work has been done, you can (to be on the safe side) carefully apply thin layer silicone, at the same time, carefully remove the excess so that the sealant is not visible.

At this point, work on installing ceramic sides is completed. Before using the bathtub, you must wait until all materials used (glue, sealant) have completely dried.

In the process of installing the edges under the tiles, a day after the procedure for applying tile adhesive (that is, when the glue dries), you need to pour a large amount of water over the masonry. This procedure, strange at first glance, affects the adhesion strength of the glue.
Between the fragments of the sides It is recommended to insert plastic crosses (the same ones used in laying tiles).
It will be more convenient to purchase ready-made corner elements made in the shape of a triangle, rather than sawing straight edges with a grinder.
Before installing the sides it is necessary to “try on” - that is, attach all the fragments to the bathtub to make sure that everything is chosen correctly..
Degrease the wall surface and baths will be helped by gasoline or white spirit.
Dry it properly Only a hairdryer can do it.
The glue should not be applied pointwise, but a continuous layer.
When glue was applied to the corner, you must immediately apply it to the desired surface and hold it tightly until the glue dries.
To avoid large gaps when laying borders, you need to attach all the elements to each other as tightly as possible.

During the overhaul in the bathroom, even if the craftsmen try very hard and make the wall perfectly flat, when installing the bathroom, there will still be gaps between the wall and the font. This is quite possible due to the unevenness of the font itself and its side. If bathroom tiles are used when tiling a room, then the presence of cracks at the joints of the tiles is inevitable and the best option for sealing the joint and its decorative decoration Of course there will be a ceramic border for the bathroom.

If your bathroom is lined with beautiful ceramic tiles and new plumbing has been installed, then using a plastic border can only cheapen the overall appearance. Therefore, to create a complete room design, it is better to use ceramic corners for bathroom joints, despite the fact that they are more expensive than their plastic counterparts and require much more time for high-quality installation.

Features of ceramic borders

In most cases, when purchasing tiles in a store, tile corners can be purchased as a set. But there are times when these products are not included in the set and you have to purchase them separately, selecting a suitable product to match the color or texture of the main finish.

For your information. Sometimes you can see the inscription “ceramic fillet” on the packaging. This is the professional name for the same ceramic corner. You also need to remember that owners of ceramic tiles from foreign manufacturers very often encounter the lack of a set of corners. Domestic tiled plinths almost always come complete with tiles of the appropriate color and texture.

When choosing a ceramic border corner, you need to proceed from the color and texture of the main material, since its task is not only to seal the joint but also to harmoniously complement the color and stylistic design of the interior. TO positive qualities this product can be classified as:

completely waterproof;
high strength;
beautiful appearance;
long service life;
resistance to sudden temperature changes;
environmental friendliness of the material;
resistance to modern detergents based on chemistry

However, a tiled baseboard for a bathroom, like any other product, has its drawbacks, which include:

high cost of the product compared to plastic analogues;
complexity of installation and large time costs for its installation.

Important! It must be remembered that a tiled border for a bathroom is usually mounted on tile adhesive, which hardens when hardened and has no elasticity. If such a product is installed on acrylic bath, which expands significantly when heated, then the base of the corner may not withstand the load and will crack, thus violating the tightness of the joint.

Another drawback that a tiled corner suffers from is fragility. If accidentally hit by a heavy object, the product will burst or chip. Of course, with high-quality installation, the adhesive composition significantly increases its resistance to impacts, but fragility still remains.

Types of ceramic bath borders

Modern manufacturers are constantly improving and expanding production, which has made it possible to produce different kinds ceramic plinths, which make it possible to use them with more wide possibilities. Modern ceramic borders can be divided into three main types based on appearance:

pencil type, available in the form of a thin and convex strip. Such products most often have different textures on the outside and are designed for sealing thin cracks. This ceramic corner is very often used to visually divide a room and decoratively frame large mirrors;
corner type is the most common type of border and is used for sealing and sealing seams of medium thickness. These models may have various colors, drawings, as well as decorative texture and often come complete with facing tiles;
frieze, the so-called ceramic corner for the bathroom, which is made in the form of ordinary tiles, only on its lower part it has a characteristic overlap, which allows you to cover the joint. This type of corner is used extremely rarely.

For your information. Most models of corners have a universal design and can be installed both on the main finishing material and under it. Below we will consider the option outdoor installation baseboards and attach necessary photos materials.

Once you have chosen the model that suits you, next question It will be up to you to properly prepare the surface, what tools are needed and how to attach the ceramic border to the wall in the bathroom.

Preparation for installation

For high-quality and quick work on upgrading the bathroom, you need to prepare everything in advance necessary tool and materials so that there are no hiccups in the process. Laying a ceramic border on a bathtub will be faster and better if you prepare:

sealant, preferably with special antifungal additives;
ceramic modules in the required quantity, preferably with a small margin, since one or more elements can be accidentally damaged during operation;
tile adhesive;
notched and flat spatula;
emery board or grater with sandpaper for grouting the ends of the border;
pliers;
A grinder with a cutting disc for stone will not be superfluous either.

Some of the listed items may not be needed, but if you are doing this work yourself, without the relevant experience, then before laying out the border, it is better to prepare everything listed above in advance.

If the store does not have the appropriate set that would match your interior in color or texture, then as an option, you can choose a white ceramic border, since this color is considered universal and fits almost any design.

How to calculate the required amount of corner

When purchasing a ceramic corner for a bathtub, you need to calculate in advance the amount that will be required to hide the seam along the entire perimeter. The number of elements can be calculated using the following scheme:

using a tape measure, measure all sides of the bathtub that need to be decorated with a corner and add up the total length;
then we divide the resulting distance by the length of one ceramic module and get the required number of pieces.

Important! Before buying ceramic bath sills according to your calculations, always plan to buy 3-4 more pieces. Because in the process of adjusting and trimming, several pieces always turn out damaged.

Installation of ceramic border

Before installing a ceramic bathtub plinth, you must thoroughly clean the joint, degrease and dry with a construction or home hair dryer. Next, fill the gap between the bathtub and the wall using sealant. If the width of the gap exceeds 5 millimeters, then you can use polyurethane foam instead of sealant.

While the sealant or foam is curing, you can already prepare the tile adhesive according to the instructions on the package. It is important to remember here that in order for the ceramic rim to hold well, the consistency adhesive mass It should look like thick sour cream and when you put it on a spatula, it should not slide off it under its own weight.

The first step is to lay the corner ceramic border for the bathroom, and from there the laying of the longitudinal sections begins.

For your information. Some time ago, to create high-quality joints it was necessary to cut the corners of a ceramic border at an angle of 45 degrees using an angle grinder with a stone cutting disc, then break off the excess parts with pliers and sand these areas with an emery stone. But today, installing a ceramic border is much easier, since the kit already includes corner blanks to create a beautiful joint.

During gluing, try to adjust the individual modules to each other so that the ceramic profile looks monolithic and, if possible, hide the end joints as much as possible. After laying the next module, excess tile adhesive should come out and it must be removed with a damp sponge or rag without allowing it to harden.

After the installation of the ceramic plinth is completed, it is necessary to let the glue set for 8-10 hours, then again generously moisten the entire corner with water and again leave it to dry completely. This wetting is necessary because the outer part adhesive composition hardens faster than the internal one, which is extremely undesirable and can lead to the appearance of microcracks.

Shutdown

After the ceramic border around the bathtub has completely dried, several more steps are necessary to achieve the final effect. finishing touches. The seams between the tiles and the border must be additionally sealed with acrylic or silicone sealant, but this must be done as carefully as possible so as not to stain the tiles.

The ideal option to achieve aesthetic beauty would be to cover the seams with the same grout that was used to cover the tile. But for this, before gluing the ceramic border, it is necessary to provide a gap of the same width between the modules, using special plastic crosses. In this case, your work will look perfect.

Important. Remember that ceramic baseboards for bathrooms absorb the most moisture, therefore, for grouting, you must use only moisture-resistant grout with antifungal additives. Choose the grout color according to your design style and your personal aesthetic preferences.

An excellent option would be a mosaic border in the bathroom, since such material is very easy to lay out due to small size modules. Despite the fact that mosaics cost a little more than standard corners, they allow you to do high-quality work without any special experience. Also, a mosaic bathtub rim is often used when there are rounded lines, as it allows you to perfectly replicate any circle.

After studying the material presented above, you will be able to lay out ceramic corners yourself without the help of third-party specialists.