Crafts made from old objects and things that can be given a second life can make your home much more comfortable. Some homemade products made for household DIY projects can significantly save your home budget, make your work easier, or make the surrounding interior more interesting. And even if difficulties arise in the process, overcoming them will be worth it.
Homemade crafts for the home workshop
In almost any home there is always some set of tools necessary for farming. But sometimes situations arise when working in your own workshop or garage requires some kind of device that cannot be purchased in a store or is very expensive. In this case, you can find a way out by making it yourself.
Forge from a balloon
This device for heating metal will become an indispensable assistant in a home workshop. The forge can be safely used for making original items by using artistic forging. These will be truly unique forged items.
For the forge, it is best to use an empty 25 liter gas cylinder. Its ends are cut off with a grinder, and the door of the forge and its back part will be made from the cut parts. The inside of the cylinder is covered with fire-resistant ceramic wool, which can withstand temperatures of more than 1200 0 C. On top it is coated with fireclay clay (lined), which can withstand temperatures up to 1500 0 C. After lining, fireclay slabs or fire-resistant bricks are laid on the bottom of the hearth.
A hole is drilled at the top and a small squeegee is inserted, allowing the nozzle of a gas-powered burner to be inserted, which can create a temperature in the forge of more than 1000 0 C - quite sufficient to heat the metal to a certain temperature suitable for forging.
Collapsible garage crane
When manufacturing such a lift, the cash costs will be much less than purchasing a factory model. To make it, you will only have to spend money on materials, half of which may be found in the garage.
Materials required to assemble the lift:
- Two racks - profile pipe 100x100x2350.
- Cross rod - steel pipe arbitrary length with a diameter of 100 mm.
- Four supports for the rod - profile pipe 100x100x600.
- The base and braces are a corner with 100 mm shelves.
- Two metal rollers for the cable.
- Four wheels for movement.
For lifting mechanism it is best to use hand winch with worm gear maximum load up to 500 kg, which is attached to one of the racks of the crane beam.
The design does not take up much space in the workshop, is easy to move on hard surfaces and is quite convenient for removing the engine from the car.
Mobile tool rack
The main highlight of this rack is its small size, but at the same time you can place it on it a large number of tools, and if necessary, quickly move it to any place or neighboring room. It is very convenient to use such a rack in your workshop or when carrying out construction and repair work in large rooms, especially when tools need to be moved frequently.
The rack can be assembled on the basis of a collapsible plastic rack installed on homemade platform with wheels (cart). The platform is made precisely to the dimensions of the rack from metal corner with shelves 45x45 mm or a sheet of plywood with a thickness of at least 10 mm. Furniture metal wheels are used for movement.
It is additionally possible to manufacture and attach fastenings to the rack for building levels, extension cords and other tools that can be stored hanging.
To help the hostess
It is not always possible to financially buy, for example, some new furniture in furniture showroom or place an order for its production. But you can always get out of this situation by making the right thing with your own hands, while making it attractive and unique, using available means for this.
Kitchen apron made of corks
The kitchen apron is the surface of the wall located between the countertop and wall cabinets. Usually this part of the wall is lined tiles. But it is possible to use many other materials to cover it, for example, gluing wine corks to the wall.
Such exclusive decor looks pretty great.
Before sticking, each cork is cut lengthwise into two halves with a sharp stationery knife. It is advisable to paint the wall black, which will highlight the seams between the plugs.
Corks are glued to the wall using liquid nails in a checkerboard pattern or with a specific pattern, since it is unlikely that it will be possible to lay them out perfectly evenly, and curved rows will visually look disgusting.
The plugs themselves are not afraid of moisture, but they quickly get dirty and are difficult to wash, so it is best to cover them with a glass screen made of tempered glass. True, you will have to spend a little money on it and order glass from a special workshop, where they will cut it to a given size and make holes for sockets and fasteners.
The glass is fixed to the wall with anchor dowels, which can be purchased at almost any hardware store.
Although the apron, decorated wine corks, may turn out to be an expensive pleasure, but the result achieved will be worth it.
The surface of the tabletop, as well as the wall, can be decorated with corks and covered with tempered glass.
Hanging folding table
Wall mounted folding table IR allows you to save some space in the apartment. When folded down, it can protrude from the wall at a distance of no more than 10 cm and does not bother anyone at all, but when unfolded it can replace a full-fledged table.
There are many options where you can use a wall-mounted folding table. Here are just a few of the most basic:
Shower for the cottage
There is probably nothing better than cooling off under running water on a hot summer day, especially if it was spent working in the garden. Naturally, only a shower will solve this problem and relieve the fatigue that has accumulated during the day.
You can install the shower yourself without involving outside help, the main thing is to choose a place for it and decide on the type of shower stall.
Among the summer showers, three types of cabins stand out:, which you can freely build on your own:
Installing a simple shower is done as follows:
- A shower cabin frame is made, which can be assembled from metal, wooden beam or other available materials.
- A metal or plastic container for water, which can be from 50 to 200 liters.
- Metal container It is advisable to paint it black for better heating of the water. Additionally, several heating electric heating elements can be installed in the container, then you can take a shower even in cloudy weather.
The booth can be sheathed with boards, plywood, slate, or simply covered with tarpaulin or cellophane film with folding curtains.
For construction on your own
The topic of construction or renovation probably worries everyone. And, naturally, everyone who does it wants to finish it quickly with minimal financial costs. Therefore, if you want to save money, you can make some materials for construction on our own. For example, these could be SIP wall panels or like this useful tool, like a vibrating plate, the need for which often arises for many owners of a personal plot.
Homemade SIP panels
To make them, you need to prepare a flat, hard platform. Laying a 10-12 mm thick OSB sheet on it rubber spatula with teeth, apply glue to it.
Then lay sheets of grade 25-30 foam plastic on the glue. After this, on top of the laid foam, as well as on the bottom OSB board, is applied adhesive mass, and a second sheet of OSB is placed on top.
If several stacked slabs are being made at the same time, work should be done quickly until the glue hardens. Typically, no more than 4-5 panels can be prepared in this way at a time.
After preparing the formed slabs, you need to create pressure using a press. Since at home, naturally, hydraulic press no, it can be replaced with a thick plywood sheet, laid on prepared SIP boards over the entire plane and loaded for 2-3 hours, for example, with several bags of cement, sand or other weight. You can even use a passenger car, driving onto a plywood sheet along a pre-made overpass.
After the glue has completely dried, the homemade panels are ready; they can be placed in a separate stack and you can begin preparing new panels. The manufactured panels should lie unloaded for another day, after which they can be used for their intended purpose.
Making a vibrating plate
To make homemade vibrating plate, you will need to prepare:
- An electric motor with an IV-98E eccentric, which is the main part of the vibrating plate.
- Steel sheet, at least 8 mm thick, size 450x800 mm. It can be ordered at any metal warehouse.
- Two pieces of channel no more than 400 mm long.
- inch pipe for the handle and two rubber bushings for its fastening.
- The tools you will need are a welding machine, a grinder and a set of wrenches.
On the narrow sides of the slab, stepping back 80-100 mm from the edges, make an incision with a grinder to a depth of about 5 mm. After this, bend the edges towards the cut at an angle of approximately 25 0 and weld them. The bends are needed so that the vibrating plate does not sink into the material it compacts and moves freely along its surface.
Then, across the slab at a certain distance calculated for mounting the electric motor, two channels are welded with the shelves down. Through in advance drilled holes in the channel, using M10 bolts, an electric vibrator is attached to them.
The handle, made of pipe, is attached to the vibrator through soft rubber bushings, which can be purchased at an auto parts store or hardware store in the hardware department.
Thus, you can make a lot of useful household things with your own hands, spending only a fraction of the money that you would have to pay when buying a finished product. You just need to put in some effort and have certain skills.
From the results of many experiments it is clear that hand made unique and non-standard souvenirs – very exciting and interesting job. It promotes the development of flexible thinking, creative taste and aesthetic imagination.
Even small children can take part in such a cognitive process, because making crafts from improvised materials with their own hands takes a long time even for those who are not assiduous and not very obedient.
For production, any materials of natural and artificial origin are used. After all, available raw materials are always available and do not require any waste.
And masterpieces that are made from unnecessary or unsuitable materials are fully competitive with store-bought analogues, since they have no analogues. Such products will organically fit into any interior, which will add exquisite originality to it.
What crafts can be made from improvised materials?
- a variety of photo frames;
- coasters for hot cups;
- many different toys;
- decorations for every taste and color;
- key holders;
- original souvenirs using quilling technique;
- various candlesticks;
- skillful crafts for flower beds and garden plots;
- designer suits and dresses for matinees;
- design of a playground for children;
- graceful decorative flowers;
- interesting decorations;
- and many other various design masterpieces.
To make it easier to make souvenirs with my own hands, photos of crafts made from improvised materials that can be found on the World Wide Web will help with this. There is no need to copy, you just need to understand the technique and do something of your own.
Using the same principle that postcards are made, it is possible to make a bright panel from paper and cardboard. But in this case, to make the souvenir look complete, you also need to think about a frame that can be made from various materials.
Instructions for crafts using improvised materials
Let's take a closer look at the example of crafts made from plastic bags - kite, which is what kids like so much. For manufacturing, you need to prepare:
- 2 polyethylene bags;
- 2 skewers;
- scotch;
- black marker;
- scissors;
- fishing line, which can be seen with strong threads.
The process of creating a masterpiece:
Straighten the bag and place skewers on it, as if in a cross, but the longitudinal one should be a third higher, from the middle. Now, using a marker, you need to draw lines that connect the ends of the skewers.
Then, it is advisable to cut out the resulting figure. The skewers are glued to the bag with tape.
From the second plastic bag, you need to cut a piece, 4-5 cm wide, of any length - for the tail of the snake. It is possible to make a tail from several short pieces of bags, first combining them with tape. After this, you should tie the tail to the lower half of the flying kite.
At the end, you need to make a hole in the place where the skewers intersect, and securely tie the fishing line there. Ready!
Step-by-step making of crafts for beginners
To make a craft - a goose made from Kinder eggs, you will need:
- yellow eggs from kinders;
- buttons: 1 for the nose, 1 for the tail and 2 for the eyes;
- ribbon;
- awl;
- elastic thread;
- glue.
The process of creating a masterpiece:
Using a preheated awl, all the eggs are pierced, one opposite hole at a time.
Then the elastic is threaded from the ponytail to the head. Next, you need to put on the nose button and thread the elastic in the opposite direction, through the other hole.
Since both ends of the thread appear in the tail, it is advisable to secure them using a button. Now you need to glue in the eyes and strengthen the button on the tail of the caterpillars. In this way it is possible to produce a whole family of similar caterpillars.
Master classes on crafts from improvised materials
For a cardboard Christmas tree you need to prepare:
- cardboard;
- glue;
- scotch;
- paints, markers, pencils;
- scissors;
- glitter, stickers, or something else - for decorations.
The process of creating a masterpiece:
The cardboard must be folded in half and cut where it bends. The halves that came out are folded in half again.
On one piece, on the opposite side of the fold, half of the Christmas tree is drawn.
The sheets are folded together and cut along the drawn line; This is how you get two identical Christmas trees. Then you need to secretly mark the centers of both Christmas trees.
On one Christmas tree, an incision is made from the top to the middle along the midline, and on the second, from bottom to middle. Now, it is advisable to insert the Christmas trees into the cuts, and you get one lush Christmas tree.
To make the Christmas tree more stable, tape is used to glue both halves together.
Pencils, felt-tip pens, glitter, paints, etc. are used to decorate the Christmas tree. At this stage, everything that only the imagination suggests is done.
Conclusion
Every parent who loves their child sooner or later thinks that it is useful for the child to do at least something with his own little hands.
After all, gadgets take up more and more space in children’s lives, while real, exciting activities are of much higher value. That’s why making crafts from scrap materials will be an ideal activity for kids and adults.
Photos of crafts from improvised means
Every home owner wants to feel as comfortable as possible in their home. This becomes the reason why there is a desire to decorate the interior not only beautifully, but also in an original way.
However, often the funds for this are not enough, because the services of professional designers, like beautiful things, are not cheap. Therefore in Lately An increasing number of homeowners prefer to decorate the interior of their home themselves using crafts from improvised materials that are inexpensive.
It is worth noting that the main advantage of such crafts is not the cheapness of the materials. The most attractive thing is that every item you create is unique. But it is the uniqueness of the design that attracts attention.
Products that were created with one’s own hands emanate a special energy. And thanks to this, an atmosphere of comfort and warmth appears in the house.
An important circumstance is that such structures can act not only as ordinary decorative elements. With their help, you can organize your space much more conveniently. After all, they can be used to store a variety of small items that are necessary for the household.
Do you think this is impossible because you need to have any special skills? No, even a child can handle this job of creating crafts.
Pay attention to the photo of crafts from improvised means, which is presented below. It shows an example of creating a key holder, which is not only a beautiful addition to the interior, but also serves as a small hanger for keys.
And the process of its creation is not complicated. Let's look at it in more detail.
Key hanger
Surely, many people are familiar with the situation when they have to raise the whole family to look for keys. After all, people often do not burden themselves with buying special small shelves for storing keys and other small things.
And since the key is a fairly small item, it is easy to lose it among larger things. To avoid having to constantly look for keys, many people keep them in their purses.
However, we can offer you a more interesting and original way storage And for this we will build a key holder.
Its main feature is that in appearance it will resemble a product decorated with brickwork.
We will tell you step by step how to make a craft in the form of a key holder from available materials. But first, let’s look at exactly what tools and materials will be needed to create it: a thick sheet of cardboard or plywood, thick napkins, hooks, glue, varnish, paints.
Stages of performing a key holder
At the first stage, you need to cut out the back wall of the future key holder. As a material, you can use either thick cardboard or a not too thick piece of plywood.
In the second stage, you should cut out small rectangles from cardboard that will imitate brick. Please note that they must be the same size.
In the third step, you must glue the cut out “bricks” to the base using glue. Remember that there should be a small gap between them. You should also not cover the entire surface of the product with them. After all, in the central part there should be a small sign with an inscription, and in the upper part there should be a picture.
Note!
At the fourth stage, you should start lubricating the bricks with glue. Do not skimp on the glue at this stage, because it is necessary so that you can place the crumpled napkin on top of it. It can also be covered with a small layer of glue on top for better impregnation.
With a stick or reverse side tassels, press the napkin into the gaps to form corners. Leave the product to dry.
Please note that any crafts made from improvised materials at home must be durable. Therefore, we strongly recommend not to skimp on binding materials.
At the fifth stage, the process of creating a visual resemblance to the natural one begins. brickwork. Once the panel is dry, coat it with paint. The seams must be painted with bronze paint.
At the sixth stage, you should coat the bricks with paint a second time. However, this time you need to use a dry brush. To do this, dip it in bronze masonry, wipe it on paper so that it becomes dry and then dip it again in the color with which you painted the bricks.
Note!
Remember that to achieve maximum similarity, you should only move the brush in one direction.
In the seventh step, which is the final step, you should cover ready product clear varnish and attach hooks on which the keys will hang.
Crafts for the garden
If you are the owner country house, then for you the decorating process is not limited only to the area of your home. Therefore, to improve the area around the house you should use garden crafts from improvised means that will decorate any garden or vegetable garden.
To make them you can use plastic bottles, hemp, tires and old soft toys. IN in this case it all depends on what set of tools and materials you have.
Crafts made from tires are extremely popular because they are quite simple to create, but at the same time they look original and interesting.
Note!
For example, you can create a real cup from tires, which will become a wonderful flower bed. To create it you need one tire, round board(the diameter of the board should be larger than the tire), paint, a small piece of rubber.
The tire and board must be painted the color you like. If you have artistic skills, you can use them to decorate the product with beautiful images.
If you do not have such drawing skills, you can paint the design one color or polka dots. The handle of the cup should be secured with a large stapler. And now your product is ready.
We draw your attention to the fact that even children's crafts made from improvised materials can become worthy decoration your garden. Use crafts your kids have made from plastic bottles and cups. Despite their simplicity, they look quite original.
If they are small in size, use them to decorate the porch or window sills. This way you can focus on them and they won't get lost in large area garden (vegetable garden).
Photos of crafts from improvised means
Interesting homemade products for the dacha are waiting for you in this article. You will learn how to make a lawn mower from an old washing machine, make a sink, country shower, dryer made from scrap materials.
Useful homemade products for the garden - do-it-yourself washing
Not everyone has the financial opportunity to buy a Karcher car. If you can't buy it, then why not invent it? Homemade sink will allow you to do without running water, reduce water consumption and thoroughly wash your car, fence, garden path or other items.
Here's what you'll need for this homemade garden project:
- plastic canister with a capacity of 5–20 l;
- hose connector kit;
- automobile nipple;
- a piece of hose;
- silicone sealant;
- sharp knife;
- compressor or car pump;
- watering gun.
Take a set of hose attachments, which includes 2 connectors, a 3/4 threaded fitting, and a 1/2 adapter.
Here is the principle of operation of such a homemade product for the dacha: you connect the gun to a hose, attach this device to the bottom of the canister. A nipple will be built into its neck.
Fill the container with water, but not to the top. Then screw on the lid and pump air inside. Pressure will be created here, and the water will flow well when you pull the trigger of the gun. Here's how to assemble such a mini-wash.
Using the tip of a knife, carefully cut a hole in the lid. It should be slightly smaller than the diameter of the nipple leg. Also cut a circle required diameter at the bottom of the side of the canister.
Insert the nipple into the cover.
Now, helping yourself with the wire, place the coupling in the hole intended for it. Apply silicone sealant to secure the connection between the coupling and the canister.
It is necessary to tighten the lid and carry out other work only after the sealant has completely hardened. Then you will connect one end of the hose to the water gun and the other to the canister.
Pour water into the container, but not to the top, so that there is room for pumping air. But do not pump too much, so that the canister does not deform or burst under pressure. Look at how the fitting should be tightened and the connectors installed.
If everything is done correctly, then when you press the trigger of the water pistol, the water will shoot out in a good stream. You can adjust the pressure by twisting the tip of the gun.
At the dacha you can hardly do without a shower. Try to make something unusual rather than tropical, then you will be able to enjoy water treatments even more.
How to make a rain shower from scrap materials for your summer house?
If you have just recently purchased a plot and do not yet have wash room, then you can take a shower right on the street, fencing off a small area near the fence with a curtain. To make one like this tropical shower, you will need very few components, these are:
- bracket;
- wire;
- flexible hose;
- metal beer can;
- hose adapter;
- awl;
- nails.
Tie the top of the hose with wire to the bracket, and attach the other end to the water supply or pump. When you lower the pump into a barrel of heated water, you will be able to take pleasant water treatments.
You can also make a rain shower head using a disc container as it. In its center you need to fix a plastic adapter that is attached to the shower hose, and the central axis of the discs needs to be removed. Using an awl, make holes at the top of the lid. Seal all fasteners well with sealant. This nozzle is held on a bracket using a thick wire or on a rigid pipe.
If you want to make a rain shower, then you can use plastic pipes for this.
You need to supply water to them, first make many small holes with a soldering iron, and then enjoy the flowing drops. Children really like these water procedures.
But do not forget to first check the water in the container from which it will be poured into the shower; it must warm up in the sun.
And to make a stationary shower, you need to first pour water into a tank or barrel, which will be located under the roof or on the roof of the building. On a warm summer day, the water here warms up well, and you can wash yourself to your heart's content. To be able to do this in cooler weather, then you need to provide a heating system in such containers.
DIY country shower
Before installing it, you need to make a shower stall. If possible, you can make it out of wood, installing this small structure on the base. Put wooden door or limit yourself to a shower curtain like this.
There are more simple options. If you have oilskin fabric, then use it.
Another option is to purchase impregnated fabric or use an old awning or tent.
If you made a fence from corrugated sheets and you have some materials left, then try making a shower for your dacha out of them. Metal pipes you need to dig in according to the markings and fill them with concrete. When it dries, cut sheets of corrugated sheets are welded to the racks. One of them will become the roof.
If you don't have enough wooden planks, then implement the option shown in the next photo on the right. And on the left is a shower that is made like a fence. So the materials for it will cost almost free.
When the shower is ready, you can install a water container on it. To make it warm up better, you can make a kind of coil out of metal or a hose. Then the water will warm up more actively.
These and other homemade products for the garden allow you to make the most of your existing containers.
To be able to receive warm water even when it is not heated by the sun, use electric heating. To do this you can plastic barrel place vertically or horizontally. Then it will be necessary to install a shadow on one side, and on the other? water fill fitting. Make an overflow hole so that excess liquid flows out and you can see that the container is already full.
Now all that remains is to install the tank. This is usually done using a shower roof. You can put a flat tank here, made of iron or plastic. You can also make a canister for the soul from metal or iron barrel. If you need to heat water, then a heating element is installed in the barrel.
Check out other examples of what you can do with personal plot with your own hands.
Interesting DIY crafts for your garden
Gardening tools are very necessary for working on the ground. Often, the store sells not very high-quality sets. After a short period of use, the handle of the shovel breaks off, or the teeth of the hoe become bent. Therefore, if possible, try to make your own tools.
Take:
- stalk;
- fragment of a water pipe;
- scrap from a two-handed saw;
- screws;
- screws;
- fragment profile pipe cross section 3 cm.
To make the blade, take a scrap of a two-handed saw and draw the outline of the future hoe. Punch two holes.
At the same distance and the same diameter, you need to make 2 holes on the chopper itself, and then cut out a fragment from a two-handed saw.
Drill these holes using a drill and a bit designed for metal work. Connect these two parts using rivets, which are screws.
Now drill a hole in the top of the hoe so you can attach the handle here.
Make also a scoop, which is very interesting to work in the beds. Then such homemade products for the garden will allow you to acquire a very durable set of tools.
Saw off the required piece of the cutting with a grinder and begin to straighten part of it with a chisel.
Then, using lever tools to help yourself, straighten this part almost completely.
All that remains is to work with the hammer so that the blade of the scoop takes on the desired shape. Using a felt-tip pen, draw the outline of its working part and cut it out with a grinder.
With help abrasive wheel clean the edges of the shovel and make them smoother. Now sand the tool with a flap wheel. This is how shiny this shovel will be.
Also drill a hole in it for the handle, then insert it and secure it with a screw.
Cover the handles of both instruments with an antiseptic and then with varnish. Now you can use the tools for their intended purpose. If you want, use the same principle to make a ripper for beds.
It’s very exciting to create things like this for your garden with your own hands. Maybe after you've made the tools, you'll want to make a device that you can use to dry the part harvested. See how one gardener did it.
How to make a dryer for fruits and vegetables?
Look at what materials you need to take for this:
- sheet metal;
- square pipes;
- locking mechanism;
- polycarbonate sheet;
- self-tapping screws;
- 2 door hinges.
- grinder;
- welding machine;
- drill;
- stationery knife;
- tape measure and marker;
- metal scissors;
- with a hacksaw.
The door here will be metal. To make it, cut 4 fragments from an iron pipe and weld them into a rectangle. Then you need to sheathe this base with metal using screws with nuts and self-tapping screws. If possible, weld steel sheet. To make a mount for baking sheets, attach wooden blocks to the back of the frame. Take self-tapping screws for this. In this case, on each side there are 4 wooden blocks for 4 baking trays.
An absorber is installed in the dryer. Take some sheet metal and paint it black. Use heat-resistant paint. When it is dry, place this blank on the bottom of the dryer.
For the absorber, take a thick aluminum or copper sheet, or in extreme cases, steel. These materials conduct heat well.
Now you need to sheathe the outside of the dryer, make the roof transparent, made of polycarbonate. Then they will be able to penetrate here well Sun rays. Glass can also be used. Close the ventilation windows mosquito net so that insects do not fly here.
Attach hinges and a locking mechanism to the door. Secure the door in place. Look what a wonderful, beautiful and spacious dryer it turned out to be.
All that remains is to make the baking sheets. They must allow air to pass through. First, knock together the frames from the bars, and then attach the metal mesh to them.
Now you can cut fruit and watch how your device will work. Place a thermometer in the dryer to monitor the temperature. It should be between 50–55°C. At lower temperatures, cover the bottom holes by placing a rag here.
In such homemade dryer You can dry not only fruits, but also vegetables, herbs, fish, meat, and roots.
If this scheme the design of such a device seemed complicated to you, then you can make a dryer from metal barrel. A hole for the door is cut out in it, and metal mesh racks are inserted inside.
To prevent water from flowing in here and for better ventilation, a roof like this is installed on top.
You can upgrade this fixture by installing a fan and an electric heater inside.
If you want to make your own lawn mower, then this is also possible.
Turn the old one into it washing machine, for example, like this one.
And if you still have an old bedside table, then you can turn it into a platform for a future almost self-propelled device. But you only need the door from the bedside table.
Drill holes in the center of the motor shaft. cutting knife make it from an old two-handed saw. It needs to be cut to size the desired shape, cut a recess inside.
Attach two wooden pickets that will become the handles of the mower. Don't forget to secure the motor and extension cord to it. Now you can test such an interesting unit.
If you are interested in other homemade products for the garden, then you will find it useful to watch the following video.
A bunch of interesting ideas is waiting for you in the first video.
And with cool homemade products from plastic pipes you can get acquainted if you watch the second story.
Since you have decided to become a self-taught electrician, then probably after a short period of time you will want to make some useful electrical appliance for your home, car or cottage with your own hands. At the same time, homemade products can be useful not only in everyday life, but also made for sale, for example. Actually the build process simple devices at home is not difficult. You just need to be able to read diagrams and use the ham radio tool.
Regarding the first point, before starting production electronic homemade products with your own hands, you need to learn how to read electrical diagrams. In this case, ours will be a good helper.
Among the tools for novice electricians, you will need a soldering iron, a set of screwdrivers, pliers and a multimeter. To assemble some popular electrical appliances, you may even need welding machine, but this is a rare case. By the way, in this section of the site we even described the same welding machine.
Special attention should be paid to available materials, from which every novice electrician can make basic electronic homemade products with their own hands. Most often, old domestic parts are used in the manufacture of simple and useful electrical appliances: transformers, amplifiers, wires, etc. In most cases, novice radio amateurs and electricians just need to look for everything necessary funds in a garage or shed at the dacha.
When everything is ready - the tools have been collected, spare parts have been found and minimal knowledge has been obtained, you can proceed to assembling amateur electronic homemade products at home. This is where our small guide will help you. Each instruction provided includes not only detailed description each stage of creating electrical appliances, but is also accompanied by photo examples, diagrams, as well as video lessons that clearly show the entire manufacturing process. If you do not understand some point, you can clarify it under the entry in the comments. Our specialists will try to advise you in a timely manner!