Furnishing a kitchen with comfortable and beautiful furniture is not easy. Currently in furniture showrooms We offer a huge range of different furniture fittings. However, it is important to know what exactly you want to achieve and for what purpose you are purchasing furniture. By using upholstered furniture (for example, a sleeping couch) to decorate the kitchen, we make it cozier and more comfortable. The main problem is the choice of a specific piece of furniture, as well as its location.
Upholstered furniture in the kitchen
Often upholstered furniture helps create extra seats for your guests or loved ones. Since the kitchens in most apartments are now small, it is unlikely that it will be possible to put a full-sized sofa and armchairs there. But there's always room for a little soft corner sofa or couches. You can read about the choice in the article.
Upholstered furniture in the kitchen is an excellent solution if the apartment is not too spacious
When choosing upholstered furniture it is necessary to take into account such properties as efficiency, functionality, as well as nice view, matching the design of your kitchen. The type of upholstery material is also important. Since this is a kitchen, the upholstery needs to be easy to clean and durable. This will ensure the durability and attractive appearance of the product for many years.
The upholstery should be easy to clean or wash. It is best if the furniture element has removable covers. In addition, the upholstery fabric must be environmentally friendly.
Advantages and disadvantages
Upholstered furniture placed in the kitchen has its advantages and disadvantages. The advantages include:
- Creating additional space at the table;
- Comfort;
- Elegant look.
However, such furniture will also have a number of disadvantages:
- Possibility of damage to the upholstery;
- The appearance of abrasions;
- Loss of appearance;
- Dust accumulation.
Therefore, when choosing furniture, it is important to pay attention to the materials and the difficulty of caring for them.
Place to rest
Purchasing a narrow sofa or couch that is small in length and centimeters will make the room more than just a kitchen. This will become a place where guests can sit comfortably and talk over a cup of tea, a place where they can always lie down and relax. In addition, if necessary, such a couch can become an additional sleeping place. The daybed can be foldable and can have built-in storage drawers, allowing you to free up some space in your home. This seating area will be a good addition to your kitchen.
Couch
A couch in the kitchen doesn’t have to mean an uncomfortable slipper.
Couches are great option kitchen additions. Such furniture elements combine convenience and compactness. With the help of a couch you will not only create a place to relax in the kitchen, but also provide additional seating at the table and are excellent.
Such couches resemble a small but comfortable one. Depending on the design style of your kitchen, you can purchase both wooden and plastic couches. The seat material will be soft one way or another. When choosing such furniture, be sure to take a closer look at the upholstery. The best way Upholstery made of leather or leatherette is suitable. This material is easy to clean, unlike expensive upholstery. After all, in the kitchen the product is always at risk of getting dirty.
Kinds
Kitchen couches come in a wide variety of types. First of all, it is worth noting their classification by size. They come in large, medium and small. Therefore, depending on the dimensions of your kitchen, you can choose a suitable product. Another classification divides couches into straight and corner. Straight daybeds are more suitable for wider spaces. As for corner couches, they are more compact and designed for a smaller space. In the corner part of the product there is convenient shelf, suitable for a plant or napkin holder. In addition, such couches are equipped with internal ones, which is also convenient for the kitchen. Straight ones can serve as a sleeping place, unlike corner ones.
A broader classification of the types of couches divides them into:
- couches with/without armrest;
- with/without back;
- on thin/thick legs;
- soft type couches (fully upholstered in fabric) / couches with a metal frame;
- leather couches;
- couches with drawers.
For small kitchens great solution there will be folding couches. During the day they will be used as a place for gatherings, and at night they can be transformed into a sleeping place.
This small product will perfectly complement the interior of your kitchen and will delight you with its functionality and low cost.
Upholstery materials
As for specific materials, it all depends on your budget. Best to use natural wood(solid pine or beech). But, if funds do not allow, then chipboard will do. The choice of printing material also depends on the amount you are willing to spend. The traditional and fairly cheap option is always foam rubber.
Read about the benefits of solid oak countertops.
Creating a couch is not a difficult process. You don't have to be a professional here. The main thing is to make a plan and select quality materials.
Using foam rubber and fabric straps you can make beautiful soft armrests.
Interesting ideas: folding, small-sized, narrow couches
Kitchen couches can not only add extra seat, but also serve as a place to sleep. There are a large number of options for couches with this function:
- Mainly as sleeping place Upright folding couches are used. They can be of various types. There are a large number of couches with front and side backrests made of wood. Additionally, the product can be equipped with soft elements for the head and side.
- There are couches made on the basis metal frame and upholstered in natural or eco leather.
- The couch can also be created without armrests and have only a backrest. This helps to simplify the design of the product.
- The armrests of linear couches are made of both wood and soft elements (stuffing, covered with leather). This design adds comfort and convenience to the furniture element.
How to make a couch, watch the video master class:
Care and operating rules for a small sleeping place
When purchasing a soft couch, it is necessary to take into account the characteristics of the materials from which the product is made. You also need to know about the rules of care and use.
In the kitchen, the product is often subject to contamination, therefore, depending on the material, it is necessary to carry out the following standard cleaning procedures:
- vacuuming (for fabric upholstery);
- cleaning with a damp cloth (for leather and other hard upholstery);
- cleaning with soapy water and a brush.
It is necessary to wash out the stain immediately, before it has time to be absorbed into the fibers of the fabric. To restore the brightness of the flowers, wipe the washed area with a solution of vinegar and water.
To extend the service life of the product, you must remember the following rules:
- the top layer of dust is removed with a vacuum cleaner with a soft attachment at low speed;
- wet cleaning is carried out when visible stains appear;
- fresh stains are removed easier and faster;
- Before using, test the detergent on a small piece of cloth and let it dry;
- You can wash the stain with a soap solution (the ratio of water and soap is 1:10);
- use foam for cleaning car interiors (petroleum-free);
- The upholstery is wiped lightly using a foam sponge.
Delicate fabrics such as velor can be cleaned well with alcohol, gasoline, vinegar (coffee stains). Apply a bag of sand to the oil stain.
Watch the video on how to make upholstered furniture, and your imagination will tell you how to use it:
Restoration of a kitchen sleeping sofa, corner
Restoration helps solve the following problems with the couch:
- Eliminate scratches and chips;
- Prevent wood defects, including veneer peeling;
- Recover items;
- Remove the old one and apply a new coating (or restore the worn one);
- Apply new thread and decoration;
- Apply wax and oils to add shine.
When worn out and visible problems with furniture, you can always resort to restoration. When wear and tear and visible problems arise with the furniture, you can always resort to restoration.
Upholstered furniture services may also include upholstery replacement and additional registrations. All this will help give your couch an even more impressive look and preserve it for many years.
Choosing a small-sized couch (corner) for the kitchen is a rather serious step. Despite the fact that upholstered furniture has a number of disadvantages, with the right choice of upholstery materials, as well as proper care, your product will last a long time and will invariably please you and your guests.
A sofa is one of the most necessary attributes of every home. Today as an alternative similar products Ottomans are increasingly being used. This type of furniture is not only practical, but stylish, which allows it to be used as a bed or a regular sofa. It is quite simple to build such furniture, but it requires a preliminary selection of the design of the structure and minimal skills for such work.
Choosing material
Modern ottomans and couches are relatively simple designs, which makes it possible to make them yourself. To get high-quality and durable furniture, you should choose suitable material for the product. Today, several types of products are used for such work:
- Laminated chipboard. The material is simple and low in price. You can purchase these products at almost any hardware store. Main disadvantages of chipboard considered low strength, minimal amount color solutions. It should also be noted that the structure of the slab contains harmful substances that can be released into the air.
- Furniture board. It is made only from natural materials, which reduces the presence of components harmful to humans. Furniture panels can be compared in strength to solid wood. One of the main disadvantages of such a product is its high price, which slows down its spread to hardware stores.
- Array. Their natural board ottoman is strong and durable. If the size of the couch is small then the array is best option in terms of price and quality ratio.
Also, to build such furniture you will need a lot of auxiliary materials:
- Wooden beam. It is used to fasten joining parts. Sometimes horizontal struts or supporting surfaces are formed using a block.
- Finishing fabric. There are no universal recommendations here, since you can choose this product to suit your taste in any specialized store. Very often flock or chenille are used for this.
- Filler. This product is used different kinds foam rubber or padding polyester.
- Additional accessories. They are used for decorative finishing ottomans. This may include special fasteners, threads for lining, buttons, etc.
Required Tools
Assembling the couch is impossible without the use of special mechanisms. To obtain reliable design, you should stock up on the following set of tools:
- Tape measure and a simple pencil. They are needed to form smooth parts.
- Hacksaw, jigsaw and other similar mechanisms.
- Screwdriver, screwdrivers.
- A set of fasteners for connecting individual parts. Various types of metal or plastic corners, self-tapping screws, confirmations, etc. All this depends on the chosen material for the ottoman.
Master class: step-by-step instructions
Making an ottoman or couch with your own hands involves working with solid wood or its substitutes.
It is important not to rush in order to get even parts.
This procedure begins with the assembly of the frame. This process consists of several successive stages:
- First of all, marking and cutting of boards and wooden sheets is carried out. Their size depends on the dimensions of the ottoman itself. Please note that the boards in the most simple designs form a hollow rectangle. The thickness and width of such a blank directly affects the strength and height of the furniture itself.
- After this, a frame of boards is assembled from the resulting elements. To fix them use metal corners or wooden beam, to which the base is screwed.
- At this stage, screw the wooden canvas. To do this, it is also pre-cut and then fixed with self-tapping screws.
- Then they begin to strengthen the frame. This often involves screwing several cross bars. If the size of the ottoman is small, this stage can be excluded. When the structure is ready, all elements should be carefully sanded. If necessary, legs are screwed to the frame, which will act as a support. Sometimes this part may be completely absent, since the structure is installed on boards.
- The process is completed by installing the headboard, as well as the supporting backrest (if necessary). Execute them from wooden planks or plywood. The shape of these elements is selected individually, taking into account the basic design of the room.
Assembling the frame is only half the battle, since the ottoman must be not only durable, but also beautiful. Therefore, it is important to further decorate the boards and make the ottoman comfortable.
The decorating process can be divided into the following sequential stages:
- Purchase foam rubber and upholstery fabric. The thickness of the seal is selected taking into account its density and location on the product itself. If this is a headrest, then you should use a thicker material that can restore its shape under prolonged loads.
- After this, the elements of the ottoman are upholstered with foam rubber. To do this, use a special stapler and staples. When upholstering, it is important to carefully stretch the sheets so that the surface does not form wrinkles. It is advisable to fix the foam rubber only from the inside to eliminate poor design and the possibility of damage to the upholstery if the fasteners are removed without permission.
- Please note that foam rubber should be attached only in certain places. This should not be done on the main surface, as the mattress will be located there. If you do not want to use such an attribute, then you should use only special foam rubber to form a soft bed.
- The process is completed by covering the ottoman with fabric. You can use a lot for this various materials, among which flock is very common. The upholstery technology is very similar to the installation of foam rubber. To exclude the presence large quantity seams, you should use large pieces of fabric that completely cover the entire surface. The material is also fixed with staples. They also need to be placed in visually inaccessible places on furniture. Often this part is the bottom of the ottoman.
The technology for constructing a couch resembles the previously described algorithm, only different layouts are used.
It is almost impossible to list all the options and models of sofas. Choose suitable option you can do it in a store, but you can also make a sofa with your own hands. Let's look at the implementation features.
DIY rounded sofa
To make one like this unusual sofa with your own hands, you will need the right material. Ideally suited for these purposes furniture panels made of wood, or thick plywood. The material must be such that the structure can cope with a certain load.
A certain margin of size is provided for attaching the upholstery.
It is more convenient to make shaped parts from Fiberboard, and then strengthen boards.
It is preferable to make the soft part multi-layered. Used foam rubber with different thicknesses and densities. It is attached to the seat and back of the sofa, as well as to the sides.
Foam rubber closes padding polyester.
Covers made of furniture fabric.
You can sew the cover yourself or order a ready-made one if the fabric used is too thick.
Legs are purchased in stores with furniture fittings. Pillows will help make the sofa more comfortable.
Sofa book: how to make it yourself
You need to start making a sofa book with your own hands by creating the basic frame structural elements. These are the seat and back, sides and a storage box.
DIY sofa step by step. Photo
. Box
Work begins by making a box. You will need to take two boards one hundred and ninety centimeters and eighty centimeters long. Their width is twenty centimeters and their thickness is two and a half centimeters. Also need four bar 20cm long and with a cross section of 5x5cm.
A box is assembled from these materials.
The structure is supplemented with slats installed transversely, made of boards 80 cm long, 5 cm wide and 2 cm thick. The bottom is covered with a fiberboard sheet with dimensions of 190x80cm.
. Seat and back
To make the seat and back frames, take timber with a section of 40x60cm. A rectangle of 189x65cm is made from it. The timber parts are connected with nails and self-tapping screws, drilling holes.
TO ready-made frames attach lamellas made of wood. They will become a support for the mattress.
. Armrests
First from the sheet Chipboard, the thickness of which is 2.5 cm, the side walls of the sofa are cut out. The dimensions are in the photo.
Then a frame is knocked down according to the same dimensions, to which the sawn wall is attached.
Holes are drilled on the sides of the box using a drill with a diameter of 10 mm.
. Assembly
When all the frames are assembled, the sofa parts are connected. To assemble a sofa book with your own hands, you will need special mechanisms. They are sold in hardware stores intended for upholstered furniture. They are attached so that there is a gap of 1 cm between the back and the seat (when they are unfolded). When folded, the seat should not extend beyond the level of the armrests.
. Laying foam rubber
Fixed on top of the slats interlining. They lay on it foam sheets, the thickness of which is about six centimeters. To ensure that the sheet is correctly placed on the frame and does not cover the transformation mechanism, pieces are cut out in the corners.
To make a soft cushion on the edge of the seat, a strip of foam rubber 2 cm thick and 20 cm wide is glued there. Another sheet of foam rubber, 4 cm thick, is glued on top. Its edge is folded down, under the seat.
Similar actions are performed with the back. Then covers, sewn to size, are pulled over the back and seat.
To make soft armrests, a roller is made of foam rubber. Foam rubber is used with a thickness of 4 cm. The width of the strip is initially 15 cm, and towards the middle it decreases to 5 cm.
Foam rubber 2cm thick is fixed on top.
TO inside such foam rubber is glued to the armrest at a distance of 32 cm from the bottom edge.
After gluing, the back of the foam sheet is fixed on top of the existing material. The excess is cut off.
There are protruding edges on the front side of the armrest that need to be tucked in.
Finished parts are covered with fabric and nailed to them accessories.
All that remains is to assemble the sofa completely with your own hands.
DIY corner sofa
Making a corner sofa with your own hands is not difficult, but you will need boards, plywood, wood panels, foam rubber, synthetic padding and upholstery fabric.
At the first stage, it is produced seat, i.e. lower sofa Self-tapping screws or corner plates are used to fasten the boards. Boards are used with a width of 20 to 25 cm.
The resulting box is closed from below oriented strand board.
The top of the seat can be completely covered with a plate or secured with hinges. You can combine the options.
For the backrest it is first made frame. The supporting part is covered with sheet material, and the back part can simply be covered with fabric. Specific dimensions depend on the parameters of the back and seat cushions.
For the seat, a sheet is cut out that matches it in size. Sticks on it foam rubber, spandbond and padding polyester are laid. All of them are straightened out and fastened from the inside out with a stapler. The cover is pulled over the top. This seat can be installed on hinges or left removable.
A corner piece is used to connect the two components of the sofa. It is made from any sheet materials in accordance with the width of the sofa. Back and bottom front side paste over batting, on top of which they place spandbond. The back side is covered with cotton fabric.
The legs are made from pieces of timber with holes made in them. They are attached to lower frames made from corner plinths. The frames are applied to the frames and connected with long screws through the holes in the legs.
TO corner parts attach the sides, connecting the lower parts of the walls. Next, you need to make armrests for the corner sofa with your own hands.
A frame is made for this the right size, it is wrapped in padding polyester, and then the cover is pulled on. The finished armrest is secured with self-tapping screws or clamping furniture knitting needles.
Unusual sofa: how to make?
IN furniture stores It’s not always possible to find original models, so it’s better to make an unusual sofa with your own hands.
First from the sheets plywood The parts of the base are cut out of sufficient thickness and assembled using timber. It is better to make the back of the sofa from timber elements, and cover the surface with fiberboard sheets, the thickness of which is from three to five millimeters. In this case, the back will be quite strong.
The finished base is processed stain or varnished. This makes it more durable.
For a soft base, foam rubber, synthetic winterizer and furniture fabric. These are used to make two pillows with a thickness of 16 to 25 cm. They are connected together with a stapler and then attached to the frame using decorative adhesive tape.
How to make a sofa from pallets?
To create a sofa from pallets with your own hands, you will need to take pallets, sand their surface, coat with primer and paint.
DIY sofa made from pallets. Photo
Take two bars and cut them at an angle of twenty to forty degrees. The angle of the backrest depends on this angle. We attach the bars to the pallet with corners.
Sheets plywood or MDF panels are also sanded, painted and primed. Then it is fixed as a backrest.
DIY sofa made from pallets. Photo
It turns out to be a frame for a sofa. He is lifted to his feet.
For soft seats and backs use foam rubber The sheets are cut to size and applied to the locations.
The structure is covered with fabric on top, which is secured using a furniture stapler.
All nodes are further strengthened. The result is a DIY sofa made from pallets.
Living room sofa: do it yourself
To make a sofa for the living room with your own hands, you first need to make drawing and calculate all dimensions. Then, taking this data into account, parts of the future sofa are cut out of wood slabs or thick plywood.
Assembled from parts frame, fastening it with self-tapping screws. They make a retractable part, attaching the necessary fittings and wheels. Guides are installed in the frame.
Foam rubber and padding polyester are cut to size. The foam rubber is glued to the base, covered with padding polyester on top and covered with fabric. The fabric is secured on the underside with a stapler. This mattress is used for the pull-out part. For the rest of the structure, soft pillows and mattresses are also made. A detailed video will help you make a sofa for the living room with your own hands.
Sofa sofa: video of the manufacturing process
Making a sofa sofa with your own hands is quite simple. First it is created frame for the base. It is cut from boards of appropriate thickness. The material is polished, marked and assembled into a single structure. The back and sides of the sofa are glued together from three boards. Then supports for the seat are placed and it is fixed there. Additionally, all parts are fastened with corners for greater structural strength.
Cushions for the seat and back are placed on the resulting base. It turns out to be a self-made sofa sofa.
Sofa corner for kitchen
You can also make a kitchen sofa corner with your own hands. This piece of furniture is quite compact and, at the same time, comfortable.
. Sidewalls
The side parts are cut out according to the specified dimensions. They are mounted on support bars with a cross-section of 4x4cm and a length of 45cm. Additionally, another beam is attached at the same height, reinforcing the structure.
. Box
This part is needed for storing things. It is made from boards 2.5 cm thick and 15 cm wide. You will need two boards 120cm long and two 30cm long. The bottom is made from a sheet of plywood.
. Back
The sides are connected by horizontal bars. The back frame is attached to them, which is sheathed with a sheet of plywood.
. Seat
The frame of this part of the sofa consists of two longitudinal bars and four transverse ones. The longitudinal bars are secured with self-tapping screws. Transverse ones are attached to them with a tenon connection. A sheet of plywood is screwed to the frame with self-tapping screws. The seat cover is connected to the rear longitudinal beam with a piano loop. The backrest posts are also attached here using metal corners.
The short part is assembled in the same way kitchen sofa corner with your own hands. Prepare gusset, i.e. install the racks and secure the seat. Then all the parts are connected into a single structure.
. Sofa upholstery
All parts are disassembled and foam rubber is cut out separately for each seat and backrest. It is secured with glue, and the soft parts are covered with fabric on top. Fabric parts are cut out with an allowance. Fasten the fabric with a stapler.
Small sofa for the balcony
To make a small sofa for the balcony you will need plywood or chipboard. The thickness of the material should be about two centimeters.
From sheet material and timber, the frame of the product is assembled. They fasten it with self-tapping screws.
The frame is covered with foam rubber and synthetic padding. A folding one is installed inside mechanism.
For the folding part you will need mattress which is easier to do with my own hands. To do this, you should select foam rubber of suitable density and thickness.
The surface of the sofa is covered with fabric.
Seat cushions are made from sheets foam rubber of different densities and pasted over with padding polyester.
The pillows and mattress are covered with fabric.
Perform massage in therapeutic, for preventive purposes, for relaxation, stress relief and return mental strength. It is used both in cosmetology and medicine, and even in psychotherapy. An indispensable accessory for any massage is a table or couch, the convenience and reliability of which determines the result of the procedure. You can make a massage table at home using ready-made drawings and manufacturing diagrams.
All accessories are divided into two groups. The first includes massive and stationary tables, which differ in size. They are intended for use in salons and clinics and have a movable headrest. Typically, stationary tables are made of wood and steel, covered with soft leather, synthetic materials or cloth. The second group includes portable massage tables, which are more often used for work at home. They weigh no more than 20 kg and are easy to transport. This table can be installed in small room or even in nature. Separately, there are massage couches, which differ from tables in that they cannot be adjusted in height.
Length standard table with face opening from 190 to 215 cm. Width varies from 75 to 90 cm.
The materials used for manufacturing are wood, steel, aluminum, and plastic. Pillows are often stuffed with foam rubber and covered with leather and durable fabric.
Setting up a homemade massage table
Making a massage table yourself is not difficult if you follow the recommendations and sequence of work. The bed is made of wood, plywood, timber. It is important to avoid sharp corners and uneven surfaces. The frame can be made from pipe sections from of stainless steel, which are fastened together with corners.
Manufacturing
Before starting work, you need to draw up or find ready-made diagrams designs, drawings and plans. On thematic forums there are many interesting ideas For self-made massage tables that can be improved or supplemented necessary details. To make a folding table with your own hands you need to prepare:
- 2 sheets of plywood 60*90 cm and about 1 cm thick;
- 2 pieces of foam rubber of identical size, at least 5 cm thick;
- 18 m of timber 2*5 cm;
- A piece of artificial leather 110*210 cm;
- 14 hinges with screws;
- Super strong glue;
- Self-tapping screws and staples for furniture staplers;
- Nails.
They start by assembling the tabletop. To do this, cut out in one sheet of plywood foramen ovale 190*120 mm. Two frames are made from timber: outer size sides of the tabletop frame are about 600*900 mm. The beams are connected with self-tapping screws, and to simplify their screwing in, you can pre-drill small holes with a drill. After the tabletops are attached to the frame, you need to lay foam rubber. The inside of the tabletop is coated with glue, foam rubber is placed, pressed and kept under pressure for about 10 minutes to set. Excess foam rubber is cut to the shape of the tabletop with scissors, and a hole for the face is cut out with a knife. Faux leather is placed on top of the foam rubber and a furniture stapler is used along the entire perimeter: the long sides are processed first, and the corners last.
When the tabletop is ready, they move on to manufacturing 12 wooden blanks. For this they use electric jigsaw or a hacksaw. First, two supports are knocked together overlapping each other, after which the long sides are cut at an angle of 45°. Two more supports are assembled from beams with an end angle of 30°. For collection, the overlapping method is used: at right angles by cutting out ledges up to half the width. The parts are fastened with loops, and the place for attaching the loops can be pre-marked with a pencil. It is recommended to first fasten it with one self-tapping screw - this will allow you to determine whether the structure has been assembled correctly. The loops are placed on bottom side frames at a short distance from the edges.
The last stage is the manufacture and installation of spacers. To do this, take a long beam, saw it into 2 parts and fasten it with loops. They are hung in the middle cross beam installed between the legs. The length of the beam determines the height massage table, so it is selected individually. You can make a massage table with your own hands on metal supports, then it will be stronger and lighter. For production, sections of stainless steel pipes are taken. If necessary, wooden and metal parts coated with special paint or varnish.
Before making a couch, you also need to find diagrams and drawings, prepare necessary materials. The manufacturing technology is similar. The homemade couch differs in that it does not have a cutout for the face, and is usually made lower.
When making a massage table or couch, you need to choose durable and lightweight materials: the product should be comfortable, practical and mobile. For upholstery, it is better to use artificial leather or Arpatek material. Outwardly, it is very similar to leather, but is durable, physical indicators and ease of use. Another important point The thing to keep in mind is the size of the table. A design that is too large will not allow you to quickly move from one part to another, and a small one will be uncomfortable for the patient. For convenience, the table can be equipped with additional shelves for creams, a holder for water and towels, and a shoe stand.
Furniture occupies the main place in the interior of a home. This piece of decor allows you not only to decorate a room beautifully, but also to fill it with comfort and homely warmth. Among large assortment upholstered furniture, the sofa-ottoman is extremely popular. This is a prefabricated composition that can be used both as a bed and as a sofa. Due to its versatility, the sofa-ottoman is perfect for apartments or houses where space is limited. Besides, modern design It has a chic look and easily fits into any home design. A very attractive option for many is a DIY ottoman.
How to do it?
The sofa-ottoman has many advantages. The main advantage is the possibility of self-production. If there is not enough space in the room, but you need to create a relaxation area, then everyone can try themselves as a craftsman and make it with their own hands modern model. The ottoman will look beautiful in any room, so it can be placed both in the living room and in the bedroom. To make a small sofa look original in a room, it is often decorated with soft pillows.
The sofa-ottoman is one of the modern youth pieces of furniture that are easy to use, take up little space and have a neat appearance. A multifunctional sofa can be purchased at finished form or make it yourself, which is what many do. The process of assembling a sofa-ottoman cannot be called simple, but anyone can handle it. In addition, the home design has more advantages - the ability to choose custom size and design style.
When you are about to start doing work, you need to decide on the size of the ottoman. If the room is small, then a sofa without additional bolsters and pillows is suitable for it - 1980 m long and 1200 m wide. Seat height in in this case will be standard - 450 mm. If desired, you can add a special cabinet to the design of the sofa, which will serve as a storage space. bed linen. As for materials, for a standard ottoman you will need:
- slats 20×40 mm;
- boards 20×200 mm;
- bars 60×60 mm;
- foam rubber in sheets;
- plywood;
- upholstery fabric.
Instructions
Of course, in order to properly make a sofa-ottoman, you need certain skills, but for beginning craftsmen, it is enough to be patient and follow certain instructions from the step-by-step instructions:
- Assembling the base. The frame of the sofa is made of solid wood (20×200 mm boards) and sheets of plywood - no more than 4 mm thick. All wooden elements are connected to each other using screws or furniture bolts. To ensure that the ottoman is durable and does not creak during use, the surface of the wood should be lubricated with PVA glue before tightening the bolts. Then you need to make cuts along the bases of the boards; they are necessary for installing the slats. The pitch between the slats should not exceed 200 mm. Plywood is nailed to the resulting frame with small nails, onto which foam rubber is applied. Everything is covered with a fabric cover. In this case, the outer part of the upholstery is folded inward towards the frame and secured using a starter or nails.
- Seat decoration. To make the seat as comfortable as possible, it is decorated. Holes need to be drilled in sheets of plywood, then a large needle and thick thread are taken and a tie is made. This procedure is necessary not only to decorate the ottoman, but also to protect the base from displacement. All wooden parts sofas must be covered with stain or varnish.
- Sofa upholstery. For external design Ottomans usually use a single piece of fabric, but sometimes it is also possible to decorate using the patchwork technique. An unusual cover can be easily sewn from pieces of old bedspreads. At correct location scraps will make an original upholstery. If during the manufacture of furniture there is no foam rubber by hand, replace it with shavings or a cotton mattress.
- Final work. Many ottoman models include drawers. Scraps from leftover wood work well for installing them. Initially, a pattern of boxes is made, then they are assembled and secured with nails. To ensure that the drawers can be easily pulled out during operation, it is recommended to use a special roller mechanism. If it is missing, you can simply fill the slats.
As they say, “it’s better to see once than to hear a hundred times.” Therefore, watch the video for the entire process of making an ottoman.
Benefits of self-assembly
Construct simple model Anyone with at least minimal knowledge regarding the furniture industry can create an ottoman sofa. A homemade sofa has many advantages. Firstly, it will cost much less than purchasing new furniture in a store. Secondly, during the operation of the ottoman you will not have to worry about its quality, since the master independently selects all the material necessary for the work.
It is worth noting that when creating a homemade sofa, you have the opportunity to choose the sizes and shapes of the furniture, taking into account the dimensions of the room. In such a homemade sofa, it is easy to change the upholstery, choosing the most suitable color option for the interior of the room.
