Chandelier made of sticks. Homemade chandeliers: choice of design, lighting system, lamps

To make the kitchen sparkle with new colors, many people wonder how to make a chandelier for the kitchen with their own hands? The light source is an important attribute in any room. It can both decorate a room and introduce dissonance into the interior space. Often when Finishing work completed, the only thing left to do is select a lamp.

A DIY chandelier will look original and unusual in the kitchen.

But sometimes, the search suitable option turn into a real quest, which only a few can complete. The most resourceful go the other way - try themselves in hand made art. They are trying to make a chandelier with their own hands. This is an opportunity to realize all your creative ideas and create a completely unique piece that will ideally complement your design idea. In fact, it is not at all difficult if you follow the instructions and stock up on the necessary tools.

Master class No. 1 (idea with dishes)

This is one of the most simple ways decorate the kitchen. The set of necessary materials is minimal; production time will also be required. You need to play up the theme of dishes with the main item that is in any kitchen - a mug. On the ceiling it will look unusual and very harmonious.

So, to work you need to take:

A homemade mug chandelier is one of the easiest ways to decorate your kitchen.

A fairly large mug. It is better to match the color to the built-in furniture or textiles. You can choose porcelain, ceramic or glass (in this case the room will be filled with muted, diffused light).
A socket for a lamp with a tube and a thread at the end and the lamp itself.
A piece of wire (it should be the same length as the light source is planned to be lowered onto). It is better to take copper (this material is stronger than aluminum, does not oxidize and conducts current better) with a cross-section of 2x1.5.
A screwdriver and a tile pen (if the cup is ceramic) or a glass nozzle (if the mug is glass).

How to make a chandelier:

at the bottom of the cup you need to mark the middle;
drill a hole slightly thicker than the tube on the base;
connect the wire to the socket;
insert the tube from the base into the hole in the cup;
secure the structure with a bolt;
the improvised lamp is ready.

Master class No. 2 (continuing the topic of kitchen utensils)

Cutlery on the ceiling. And what? Very logical and conceptual! The theme can be seen in every detail. This method manufacturing homemade lamp in the dining area - one of the most budget-friendly. You won't have to spend much. But the result will be unusual. In addition, if you quickly get tired of it, you can always replace it without harming your wallet.

A chandelier can be made by gluing spoons around a bottle.

Minimum materials needed:

5 plastic bottle, which will serve as a frame for the future lamp for the kitchen;
plastic disposable spoons, a large number of these parts will be needed;
glue, and, of course, a socket with a light bulb and an electrical wire.

And the work is as follows:

You need to cut off the bottom of the future lampshade (bottle).

Start gluing the spoons from the bottom, leaving only the deep part first; the handles will not be useful.

Parts of spoons need to be attached to the walls with the convex side outward, tightly to each other. The next layer should be attached like this: the new parts should be in the gaps between the lower tier - in a checkerboard pattern. And so on floor by floor.

So, you can very quickly reach the base of the lamp. The neck will serve them. Its diameter is ideal for passing a base through it. By the way, it can be decorated using the same available materials, but using a slightly different technology. Glue the scoops to each other in a circle (they will resemble a wreath). Place this wheel structure on top of the light source. So everything you need will be hidden under the lampshade.

It looks original and is done quickly. In addition, the chandelier can be of any color (not necessarily white). Let it repeat the color motifs of the room. For painting, you can use an aerosol to apply the paint evenly. Or, on the contrary, you can paint it with spots - a kind of aesthetic move.

Master class No. 3 (idea with a sphere)

A DIY chandelier made from threads is well suited for a high-tech kitchen.

If you want simple ones in the kitchen geometric shapes, you can choose a lamp round shape. It is suitable for both classic interior, and for high-tech style. Making such a light source is as easy as shelling pears. The basic element for it can be an old inflatable or rubber children's ball, or you can simply take and inflate the ball. And then, everything is simple.

You need to stock up on a skein of thread (linen will look natural and environmentally friendly).

Buy PVA glue (you will need about a kilogram) or transparent construction glue, base, lamp, wire.

It is better to immediately mark the hole for the cartridge on the top of the ball or ball. After this, attach the end of the thread with tape and begin wrapping the sphere at random intervals. The tighter the threads are wound, the less light will be transmitted. But you shouldn’t make the frame too fragile either.

Periodically you need to moisten the threads with glue using a brush. Without sparing, blot generously.

Then leave the future chandelier to dry. And then pierce the ball and pull it out through the provided hole.

All that remains is to thread the base with the lamp into the hole and connect the chandelier to the network.

By the way, lovers of all things natural can use twigs, sticks, and twigs instead of threads. They can be collected in the forest and practically do not spend money on purchasing materials. The parts just need to be cleaned of debris and varnished.

The principle of operation is the same: cover the already familiar ball with pieces of wood. It is recommended to fasten them together using wood glue.

Master class No. 4 (second life of an old lamp)

A lampshade for a future lamp can either be created from scratch or a thing that has already become obsolete can be revived. Surely, many people at home or in the country have piles of rubbish that they no longer want to keep, but they still don’t have the determination to throw them away. If you have imagination and a few available tools, you can realize any idea.

What are the benefits of items from the past? They are real long-livers, since their life is not over yet. They were made from enough durable materials. Plus, these things have their own history, sometimes they are a real family heirloom. Because Now vintage style is in fashion, then restoring a lamp forgotten in the attic or closet - great way create a designer decorative element that will surprise your guests.

With the help of paints, glue and imagination, you can make a beautiful chandelier to the kitchen.

To prepare such a chandelier you will need:

lampshade from an old lamp (any shape and any material);
a leg with a socket from an unnecessary chandelier;
paint and a regular kitchen sponge for washing dishes (useful instead of a brush);
paint of the desired color (it is better to take moisture resistant, because in the kitchen there are often evaporations and temperature changes);
glue (you can use wallpaper or regular PVA);
assembly adhesive, any fabric - for decorating the lampshade;
small details (flowers, berries, beads, leaves - anything) to decorate it.

Simple instructions:

Worn parts need to be put in order. Clean the leg from rust. Clean the base of the lamp sandpaper(if it is metal) or wash it (if it is plastic).
Dilute the glue (if you are working with wallpaper).
The fabric can be cut into pieces so that it gets wet in the glue better and faster.
The material needs to be pasted over the lampshade with outside and from the inside. Air bubbles can be expelled, or you can leave them like that, with folds. Allow the structure to dry.
When the fabric shell becomes dry, it needs to be painted. A sponge prepared in advance will come in handy for this. Give desired color necessary from all sides. It is better to paint over it several times - for saturation.
Now the lamp can be connected to the leg, which will be attached to the ceiling.
Then comes the decoration process. For gluing decorative parts, assembly adhesive (preferably transparent) is useful. A homemade chandelier can be anything: resembling a basket of flowers or fruit; a lawn with insects or surprise with an abstract pattern, geometric pattern, in a word, it all depends on your imagination.

DIY kitchen chandeliers are a winning option to decorate your space and make your kitchen different from everyone else’s - bright, creative, original!

The idea of creating designer furniture or decorative items with your own hands has always enjoyed special recognition. Have you ever tried to make something interesting, a chandelier for example? At first glance, it seems that nothing worthy will come of this idea, and this is the privilege of designers. Moreover, you need to spend a lot of time buying necessary materials, and have straight arms, otherwise the result will be disastrous. But this is only at first glance. In fact, you can create magnificent beauty from absolutely any things you have at hand or gathering dust in the attic. And there is absolutely no need to be a great master. All you need is a little ingenuity, imagination, free time - and the chandelier, made with your own hands, is ready.

Fluttering tenderness

A great option for a “test of the pen” is a chandelier made of butterflies. It’s very easy to do it with your own hands, and if you use your imagination and slightly change the idea, the result can exceed your wildest expectations. So let's get started.

What will it take?

We can say that you will need nothing at all:

The base of the chandelier itself with a socket and a light bulb (quite suitable from an old one); if desired, it can be repainted in a suitable color;

The frame for the lampshade can be taken from a previous chandelier or use a hoop from a hoop;

Pieces of tulle and ribbon or fabric, the main thing is that the color scheme is harmonious;

Lighter, fishing line and hot gun(matches, strong threads, glue);

You can cut butterflies from fabric, thick paper, plastic, in general, from any material that may be suitable for these purposes and is available;

A shaped hole punch for butterflies; if you don’t have one, you can use scissors.

Let's put this miracle together

First of all, we wrap the hoop with tape, securing it with inside glue and decorate it. Cut a ribbon of a different color into small pieces and tie them around the hoop in a circle, making indentations. Instead of scraps of ribbon, you can tie small, neat bows, as your imagination tells you. We singe the edges of the ribbons with a lighter so that the threads do not unravel. We knit pieces of tulle into the free spaces between the bows (shreds). We attach four equal strips of tulle or ribbons to the hoop; they will hold our future lampshade based on the chandelier. Tie them together with a bow at the top.

Let's move on to the butterflies. You can cut them yourself different shapes and sizes. We use multi-colored materials, and, if they allow, we give the butterflies a shape and relief. They can be painted or covered with glitter.

It is better to first unwind and straighten the fishing line so that it does not gather in curls. Place a piece of fishing line on the table and hot glue the butterflies to it with a hot gun. The distance can be completely different. You can insert beads between the butterflies themselves for added beauty and also secure them with glue. Let the glue dry.

Tie the finished sections of fishing line with butterflies to the previously prepared hoop. You can evaluate the overall result and add as many as you wish. The butterflies can be placed either at the same level or along the entire length of the fishing line.

In our case, a chandelier consists of three shades. With your own hands you can arrange and top mount, or you can buy a suitable one. It should hide all wire connections, set the distance and fit tightly to the ceiling.

All that remains is to put all the parts together. We connect the wires, attach the lampshades and... enjoy a job well done!

It will take a lot of time, but it's worth it, believe me.

Below is another great option. paper chandelier. Tell me where it is possible to buy one? Unless you do it yourself.

How to make this beauty?

We need a paper lantern, a glue gun and coffee filters. You will need a lot of them; one such chandelier takes almost 400 pieces.

The beautiful airy and fluffy lampshade is ready!

A little bit of nature

DIY chandelier made of wood. Do you think it's difficult? Not at all. Let's look further.

Materials

Here you will need:

Frame from an old chandelier;

Grape twigs and willow vine;

Twine, wire cutters and spray paint.

Front of work

We select grape twigs of suitable size, clean them of all excess and fasten them to the frame of the chandelier with twine. Each branch should smoothly fit against the bends of the metal, braiding it, and be well fixed.

Use willow twigs to wrap the string fixation points. They are more flexible and can be used to cover everything. difficult places. The DIY wooden chandelier is almost ready, all that remains is to paint it. The color range is very different, from white to blood red.

Another interesting option. A large one is used vine. You just have to give it a shape and weave it into a ball. The vine may not be very pliable; you will have to wet it well and only then form the sphere. In this position it will have to dry. Carefully fix each strip and set the tone for the frame of the chandelier. It’s not a day’s work, but the result is worth it, incredibly beautiful.

With the aroma of Burgundy

What do you do with empty wine bottles, you're probably throwing it away? But in vain. These can make an original bottle chandelier. It's quite easy to make it with your own hands. You just need to stock up empty container, preferably not from too dark glass (otherwise the lighting will be dim), a glass cutter, wires and cartridges. Now we will tell you how to make such a chandelier with your own hands.

Master class with bottles

First, rinse the bottles thoroughly and remove the labels. Afterwards you will need to cut off the bottom part. We only need the top one, it will be the lampshade. Outline with a glass cutter straight line, walk over it, tapping lightly, with a hammer. Afterwards the bottom can be beaten off. Process the edges of the cut; it is better if they do not remain sharp. Place the wire inside the bottle and connect the cartridge. Screw in the light bulb. Ready!

You can use several bottles on the same level or different ones, combine them by glass color or shape. Your imagination has a green light!

However, not only glass bottles can be used. Plastic ones are just as suitable for this role. A little effort - and you will make a chandelier with your own hands! You just need to prepare the material; the more bottles you collect, the better. They can be of different shapes, sizes and colors. Cut off the lower parts, connect them together with fishing line and attach them to the base. Voila! And the best part is absolutely free.

The ideas for creating such unusual things are very interesting. You can invent, complement and create from absolutely everything. The field for activity can be not only chandeliers, but also floor lamps, table lamps and even sconces. They can be changed completely or improved with small additions that will bring harmony to the interior and create even greater comfort. Inspired by such ideas, you can make a beautiful thing not only for yourself, but also as a gift to a loved one.

Fantasize, search and try, and you will certainly succeed. Perhaps you will come up with something special, original. You can make not only beautiful, but also useful things, such as, for example, the popular Chizhevsky chandelier. You can make simple ones with your own hands, but really worth it products. Good luck in your endeavors!

There is no doubt that properly executed kitchen lighting sets the tone for the entire interior. A chandelier can become the central element in this cozy and warm room.

Using scrap materials - or even waste - you can make a lampshade from threads, an eco-style lamp from jute twine or plastic bottles, or you can make a real masterpiece– a beautiful chandelier made of wooden or glass beads.

You can also not only hang a lamp made by yourself in the kitchen or dining area, but also give it to your loved ones as a gift.

Method 1. From scrap materials - anyone can do it!

The simplest DIY lamp is made from threads. Indeed, with similar design even a child can handle it. So, to make a chandelier from threads, we will need:

Threads - you can take regular jute twine or thick cotton threads with a total length of at least 100 meters, the color is chosen based on your imagination and the existing interior;
PVA glue and brush for applying it;
Petrolatum;
2 balloon– one for work, the second for testing; It is better to take a round ball, not an ordinary one, then the shape of the lamp will be the correct shape.

Advice! A children's or rubber beach ball will also work. For very large lamps, a fitball, for example, is suitable.

Work on creating a ball of thread is carried out in the following sequence:

Inflating the balloon required sizes. Do not forget that the resulting lampshade made of threads will repeat the shape of the ball. Using a marker, draw one or two circles at the top and bottom (more at the bottom).
Pour glue into a container and carefully process the threads. And the ball itself can be coated with Vaseline with a brush.

Advice! You shouldn’t apply glue to all the threads at once - it’s better to move along the winding area.

Next comes winding the threads around the ball, taking into account the drawn holes - the density of the winding determines how your lampshade will turn out in the end.

After the ball is wrapped, you need to leave the future chandelier to dry for at least 24 hours.
The ball bursts and its remains are easily removed from the robust construction. The result was a lampshade made of solid threads.
A hole is cut at the top to accommodate the cartridge.
You need to check the strength - another balloon is inserted into the lamp and inflated. This will demonstrate the flexibility of the design.

In this way, you can also create local lighting in the kitchen by creating several lamps from threads with your own hands. Or you can hang it in the dining area, as shown in the photo.

Do not forget that for a ball of thread you can make additional decor in the form of interesting coloring, beads, butterflies or artificial flowers, or you can make a whole bunch of balls of different sizes.

Using the same principle, you can come up with your own unique design lamp For example, from lace, or ceiling lamp as in the photo below.

Method 2. Creating a masterpiece - you need to try!

You can get excellent kitchen lighting if you make your own lamp from beads or fabric. You will get a lamp in style or a real candelabra chandelier.

For this job you will need:

Old hoop, garden basket, hanging metal planter, or wire to create a frame;
Decorative chains;
Beads, beads, ribbons, strong threads;
Lamp socket.

The lamp will be a two- or three-level structure of rings located one above the other and connected by chains or wire.

Rings can be taken different sizes, creating a lampshade in the spirit of a vintage classic, or the same - this is exactly the kind of lighting that is performed in.

The base of the lamp is certainly painted, wrapped or decorated, after which they begin to string the beads.

The consumption of beads in this project is as follows:

Bottom part: beads with a diameter of 16 mm, 15 pcs. on a thread;

Upper part: beads with a diameter of 12 mm, 31-32 pcs. on the thread.

Here you can vary the degree of tension and the number of threads.

Advice! The work should be carried out by first hanging the chandelier and inserting a socket into it.

By analogy, you can create a chandelier from artificial fruits for the kitchen. And subdued lighting will be achieved if you use fabric to cover the frame. As a rule, such a lampshade is made for country and country styles.

Method 3. Lamps made from waste materials - for a modern kitchen!

The most original lamp can be made from waste materials such as plastic bottles and disposable spoons - it’s beautiful, cheap and environmentally friendly!

We make a lampshade in a minimalist style and - no additional decorations from threads or beads, only matte white or colored plastic. To make such dim kitchen lighting with your own hands, we will need:

Base made from a 5-liter plastic bottle;
Cartridge with wire and lamp;
Glue for high-quality fixation;
Lots of disposable spoons.

To make a chandelier with your own hands, cut out the bottom of the bottle and cut off the handles of the spoons (not completely, so that a small handle remains). Using glue, we fix the cut spoons on the base bottle. They need to be placed evenly, in a row, then the lampshade will look attractive.

Advice! Each next row overlaps, without gaps.

The resulting chandelier will resemble fish scales. However, it should be remembered that this design is quite dense, which means that additional lighting will definitely be needed in the kitchen.

The shape of the lamp can be different, for example, in the shape of a lotus.

You can also make such decorations from disposable spoons.

A lamp made from plastic bottles, or rather from their bottoms, made with your own hands, may seem like lace or consisting of many small flowers.

Advice! Such a lampshade can be made not white, but colored - which means you need to take colored bottles or paint it with paint of the original color: copper, gold, steel, pink, black, etc.

The resulting lampshade can be hung in the kitchen or above the dining table.

Let your kitchen be cozy and bright! We wish you creative success and present some more wonderful ideas for making kitchen lamps with your own hands from improvised materials.

The stores offer a huge range of lighting fixtures for any room. But a DIY chandelier for the kitchen or another room will become a truly exclusive home decor option. You won’t be able to find another one like this, but the process itself will be enjoyable.

Materials and safety

In the process of working on a particular model of a homemade chandelier, scrap materials will be used, which means that the total cost of the device will be minimal, but the exclusivity of the product will be maximum. When selecting material, you should consider the following points:

It must be non-flammable. After all, it is used to create an electrical device, and there is a risk of fire.
Determine what type of lamp will be used. Thus, fluorescent and LED sources practically do not heat up, but incandescent and halogen lamps do the opposite.
Feasibility of use. It is worth remembering that it is not always possible to make a homemade product the first time; the material must be chosen so that its damage is not a problem.
Since the chandelier will be used in the kitchen, the material of the lampshade and shades should be easy to clean, and the lamp elements should be removable.
A homemade chandelier cannot be hung on electric cable no matter how easy it may be. For hanging, you should use chains and special tubes (soft or hard).

Most homemade chandeliers are made in the form of a single shade or closed lampshade. Therefore, you should not count on too much luminous flux. Such lighting fixture It will definitely become a central element in the kitchen and attract attention, but additional light sources must be provided for it.

Homemade chandeliers give little light, although they can be very thematic

From threads

This material, which is on hand or can be bought very inexpensively, will help you create an original light chandelier. If you choose white threads, you can easily paint the chandelier in any color. The size of the chandelier can be anything, it depends on your desire. Appearance The product is simple, which will allow it to fit into the interior of any kitchen, but at the same time original.

Important! The basis of the lamp is threads; you can use thick cotton ones, but not woolen ones.

The work requires: threads, PVA glue, a brush, a round inflatable ball of the required size. Creation order:

Inflate the balloon and draw a circle at its base.
Pour the glue into a container into which it will be convenient to immerse the threads.
Wrap threads pre-soaked in glue around the ball in a chaotic manner, going around the circle area that you drew in the first step. You can simplify the process by piercing the glue bottle closer to the bottom and threading it there. This way it will be evenly wetted with glue.
When the winding is completed, the ball should be hung and the threads dried. Depending on the size and layer of winding, this will take about 24-48 hours.
When the future lampshade is completely dry, you need to remove the ball after deflating it.
All that remains is to select the size of the cartridge and connect the wires to it.

Step-by-step production thread chandeliers

Advice! In a large kitchen, 2-3 or even more of these small lamps look good. They can highlight certain areas. It is difficult to obtain a powerful luminous flux from them, but their effectiveness is at a high level.

Using the same algorithm, you can create an original openwork chandelier. The main material is ready-made knitted napkins. They are soaked in glue for 10 minutes, after which they are glued to the ball. They take longer to dry, about 3-4 days. A similar chandelier can be made either from one large round napkin or from individual elements any shape. The second option looks very original.

Made of wood

Such chandeliers are extremely simple to create, but their appearance is extremely non-standard. They are not suitable for every interior. It can easily fit into a kitchen decorated in a country or oriental style. The kitchen must be large to capture the beauty of this chandelier in small kitchen will not work.

In the process, you can use both massive beams and vines and even bamboo sticks. Options for homemade wood chandeliers:

Knock 2 bars together in the shape of a cross and place the cartridges on them. This is the easiest option to implement even without any special skills in working with wood.
The old one will come in handy wooden wheel from the spinning wheel. If such a rarity is found, then the chandelier can be created very original. The wheel needs to be sanded, varnished or painted, suitable lamps attached, and cartridges mounted.
Ceiling lamp made from untreated branches. Very modern version, which can complement any eco-interior. The algorithm of work in this case is similar to the process of creating a chandelier from threads. Only the ball base is not wrapped with yarn, but branches are glued. This must be done in such a way that each new branch had a fulcrum on the ball and on those already glued.
Another option from the branches. Need thin ones different lengths. Holes are drilled in them through which the wire passes, which is used to attach it to the round base. The cartridge is installed in the center.

Original chandelier made of branches for country style

Important! Any wooden elements, whether branches or timber, must be varnished or painted before or after creating a chandelier.

From glass jars

Such chandeliers have original look and absolutely safe. Glass is heat-resistant, so even incandescent lamps can be used in such chandeliers. To work, you need jars with screw caps. Step-by-step algorithm creations:

Make a hole in the lid that is sized to fit the cartridge that will be used.
Insert the socket with the light bulb into the hole and screw on the cap.
Connect.

For such a lamp you need to provide a suspension, it can be a chain or a rod. A chandelier created using this algorithm can be:

With one lamp-can. Such models are located on the ceiling in the amount of several pieces.
With several lampshades. The basis for their consolidation is wooden plank or plywood. They can also be collected in a bun, which will look even more unusual.
Glass is easy to decorate. In the process you can use: twine, special heat-resistant decorative composition, paints. The last option will help create an imitation of stained glass.

Simplicity and originality - a chandelier made of cans

Using a similar algorithm, you can make a chandelier from:

Glass bottles. In them, the cartridge is launched through the neck, the fixing element is a cork plug. The bottom needs to be removed and sanded so that the edges are not sharp.
Decanters. The process is similar to the previous one.
Cups and saucers, plates. For a kitchen, such a themed chandelier is a real find. Do not forget that ceramic cups are quite heavy, so you need to provide a suitable base and fasten the chandelier itself to the ceiling.
Forks, spoons. Holes are drilled in their handle, a wire is threaded through them, which is attached around the perimeter to a wooden rectangular or square block tree. The cartridges are mounted in the center of the structure.
Colander, pots, graters, metal bowls, and in general any kitchen utensils that are not in use.

From fabric

Textile - comfortable material, from which it is possible to create original and intricate chandeliers. The procedure for creating a fabric lampshade for a chandelier is approximately the same, more specifically:

You need a foundation. It can be an old lampshade, or any object of a suitable shape. If the base is metal, then it must be examined for rust stains. If they are, then clean them. If this is not done, the print on the fabric cannot be removed or painted over.
Make glue. You need a composition that is used for gluing non-woven wallpaper. The powder should be diluted according to the instructions, when the glue is ready to immerse the fabric in it, leave for 10 minutes.
Remove the fabric and place it on the base. It is advisable to make folds along the surface, so the texture of the finished product will look more original.
Leave until completely dry at room temperature. Depending on the density of the material, this will take 1–5 days.
The next step is coloring. If there are a lot of folds, then painting with a brush will be inconvenient; it is better to use a sponge. If necessary, apply several layers.
All that remains is to create the desired decor. The following can be used in the process: artificial flowers, leaves, branches, ribbons, rhinestones, sparkles. The main thing here is not to overdo it, because in the kitchen there is no need for an overly decorative chandelier.

A fabric chandelier can be like this

Important! Such chandeliers provide little light, as their lampshade is dense. It is convenient to place them in the dining area; this will help highlight this area. Creating additional lighting is a must.

Making a fabric chandelier can be much easier. They will come to the rescue ready-made frames lampshades, rings, metal hoops. Covering them with fabric is no more difficult than wrapping a gift. Using light tulle, you can create an original effect and diffuse light.

From beads or seed beads

From the usual wooden beads or beads you can create a beautiful chandelier. Order:

Prepare a frame made of metal or other material. In this case, you can even use a frame from an old lampshade. Its condition does not matter, since it can be easily decorated.
Beads or seed beads are strung on fishing line or dense strong thread. If beads are used, it is better to take multi-colored and various forms, this will make the lampshade more interesting.
All that remains is to fix the threads on the base and attach the cartridge. The threads are fixed with tension or with free sagging, depending on the idea.

Such chandeliers look very original, imitating large crystal ones of the last century. Such chandeliers are suspended; a chain is used as a connecting element to the ceiling.

Chandelier made of beads in the interior

From plastic bottles

If you have accumulated a lot of plastic bottles, they can be used very usefully.

The first option is weaving. Cut off the neck and bottom of the bottle, cut the middle into thin strips. The more colors the bottles have, the better; they can also be painted. Now the basis is taken - metal carcass, pull tight fishing line or pieces of plastic around the rims and secure. Next, the creative process is weaving according to the principle of creating a fence. You need to weave tightly so that the lampshade holds its shape.

Second option: decorative chandelier. Creation order:

Prepare the bottles in the same way as in the previous version.
Chop leaves, flowers or any geometric figures different sizes.
Treat the edges with a soldering iron so that they curl slightly. You can draw veins, so they will look more natural.
From copper wire make branches, attach leaves to it.
Secure the branches to the frame.
The light from the bulb will shine through the foliage, creating an interesting effect.

The process of creating a chandelier from a plastic bottle

Third option: from a plastic bottle and disposable spoons. In the process you need: a 5 liter plastic bottle, disposable spoons, a glue gun. Process of creation:

Cut off the bottom of the bottle.
Cut off the handles of the spoons; only “scoops” are needed.
Apply glue to the bottle and glue the spoons along the rows, starting from the bottom. Spoons are placed with the convex side out.

The result is a sort of scaly chandelier. It can be painted or left white.

From kebab sticks

An original country style chandelier can be created from wooden sticks for barbecue. In addition to them, you will need glue and organza ribbon. Which form you can choose yourself. The simplest option is square, when the skewers are folded into a “house”. Secure each stick with glue. Alternatively, you can make a star, a hexagon, or come up with another shape.

During the process, it is important that the sticks lie exactly on top of each other, otherwise the chandelier will look sloppy. The size of the structure can be any. After the glue has dried, you can decorate the chandelier with ribbon. It is threaded through sticks in any suitable place. On top wooden structure It is recommended to varnish or paint.

Ready-made chandelier made from wooden kebab sticks

From laser discs

From this material it will be possible to create original chandelier with live lighting effect. You can make it in the form of a ball, according to the same principle as with a thread chandelier. Another option is to cut small elements and string them onto threads, which are secured to the frame.

Discs are a convenient and easy-to-handle material, so you should use your imagination with them and then be able to create original item decor.

Important! Whatever idea comes to mind, it is worth remembering that such a chandelier will not be able to fit into any kitchen interior, but perhaps one created in a high-tech style.

From cardboard, paper

Oddly enough, even from such materials you can make a very beautiful and original chandelier. The easiest way to make it is from cardboard; for this you need:

Find a suitable stencil. The outlines of the chandeliers look beautiful classic style. Make 2 identical parts from it, cut them so that when connected they create a three-dimensional structure.
If necessary, paint the cardboard.
Assemble the parts and strengthen them with wire or thread. To do this, make holes first.
It is suspended on chains and a cord is threaded through it. The cartridge is fixed at the bottom.

Using the same algorithm, you can make a chandelier from plastic or hardboard. Such materials are much stronger and more durable. In addition, the use of such a chandelier in the kitchen is more convenient. The chandelier elements will have to be cut out with a jigsaw.

Master class on creating a paper chandelier:

You will need a foundation, it may be an old one. ceiling chandelier, a circle made of plywood or wood.
Cut butterflies from thick white paper. It is convenient to use a cardboard template. IN finished product Butterflies of different sizes look original.
Secure the butterflies to a thick white thread or fishing line. It is convenient to do this with glue; you can also string them through 2 holes on the workpiece.
Attach the threads with butterflies to the frame. Moreover, these threads can be of different lengths, which creates the effect of movement.
If desired, the chandelier can be additionally decorated with beads, rhinestones, and individual butterflies can be painted.

Paper chandeliers: options

Advice! You can cut out not intricate butterflies, but circles, they look no worse.

Selecting a lamp and socket

When making a chandelier, it is important to use suitable electrical materials. The first essential element is the cartridge. In most cases, you need one that has a ring to secure the lampshade.

For some of the presented models, a cartridge is suitable, which is rigidly fixed to the base with two self-tapping screws. You can attach it to any surface. As for the type of cartridge according to the size of the base for it, it is better to use standard ones. This will eliminate the problem of finding non-standard light bulbs.

Regarding the light bulb, it is better not to use incandescent lamps, they get too hot and consume a lot of electricity. LED and fluorescent products – optimal solution what is it in performance qualities, and in terms of efficiency.

How to choose the right chandeliers for suspended ceilings

The originality of the interior design of a kitchen, bedroom or any other room can be determined by the presence of even a small accessory, the main thing is that it is rare or exclusive. This could be a homemade photo frame, a candlestick, a table for your phone, floor vase, lamp or chandelier.

Execution options unusual lamp enough for a living room or kitchen, you just have to turn on your imagination and it doesn’t matter if your imagination doesn’t tell you anything. You can use step by step instructions making any model you like by studying the master class. Materials for production unusual accessory can be found even without leaving your own home.

So, let's begin…

Homemade chandeliers or lamps may differ in materials or manufacturing principles. You can make a chandelier out of anything and you don’t have to go to the nearest shopping mall for this, such materials can be found at home:

paper;
threads;
disks;
disposable tableware;
plastic bottles;
kebab sticks;
hangers;
newspapers and glue;
cardboard;
felt hats and much more.

The choice of material may depend entirely on your imagination, or the future model of the lamp may depend on the availability of certain materials.

You can make a lamp, chandelier or lampshade in different ways:

using origami or papier-mâché techniques;
using carving or embossing;
by weaving or threading;
using crocheting or macrame techniques;
by connecting identical fragments.

The manufacturing technique will directly depend on the material chosen.

Chandelier made from barbecue sticks

Having wooden sticks on hand (ordinary kebab sticks are ideal), organza ribbons and glue, you can make an original lampshade with your own hands, which will wonderfully decorate the interior of your kitchen if it is decorated in the appropriate style or has some of its details.

Making such a chandelier for the kitchen at home is not difficult:

Sticks are laid out around the perimeter of the square and connected with glue. The task is quite painstaking, but it awaits you excellent result. The height of the lampshade will depend on your desire, the height of the ceiling in the room or the amount of material.
The upper part of the lampshade must be sealed with cut sticks (so that their ends do not protrude), laying them crosswise or parallel, leaving a hole in the middle of the required size for the cartridge.
After the glue has dried, you can begin decorating the product.
Multi-colored organza ribbons are tied at the protruding ends of the sticks; you should not skimp on their quantity. Several ribbons can be threaded between the sticks in the corners and in the middle of the product.
You can hang the lampshade on a hook placed on the ceiling of your kitchen using the same tapes, and secure the socket in it through the hole left.

Cardboard chandelier

You can make it from simple cardboard unusual chandelier, which will become an exquisite touch in interior design.

A short master class will show you how to make it:

Using a printed stencil, two identical parts with slots for connecting them in the center are cut out and joined into a single whole.
If the color of the cardboard is not as desired, the parts are painted before assembling the chandelier.
In order for the chandelier to be firmly assembled, its connection points should be duplicated with wire or strong thread through holes made in advance.
The chandelier is attached to the ceiling with a chain through which the power cord is threaded.
The chains and cord are painted to match the chandelier.
The connection point between the cord and the socket is hidden under a plastic glass, also painted to match the chandelier.

Using the same principle, you can make your own chandelier from plastic or hardboard. It will be much stronger, but cutting out parts with scissors will be quite difficult; it is better to use a jigsaw.

You can decorate such a chandelier with any elements. For example, paint the flames of candles with glitter varnish, decorate the bowls of candlesticks with sequins or lace. Pendants, rhinestones or fabric flowers would also be appropriate.

Lamp made from laser discs

If there is a lot left in the house laser discs, which are a pity to throw away, but as information carriers they are no longer suitable, you can use them to make an original chandelier, lampshade or lamp. The design of the accessory will depend only on your imagination, the materials at hand and the number of accumulated disks.

What you need

For the manufacture of original lamp from the disks you will need two round wooden planks different thicknesses, which are slightly larger in diameter than discs, wooden or metal racks. You also need a fluorescent lamp of the required length, a magnetic starter and the disks themselves. Wooden planks can be ordered from a carpenter you know or cut out yourself; racks can be purchased nickel-plated.

How to do

We make a hole in a thick board, install a starter with a switch and connect it to the lamp. Next, disks are strung onto the lamp in required quantity, racks are installed around the disks and the upper part is attached.

Thus, old media in the form of an original lamp made of disks will serve their owners for a long time.

Chandelier “Birch leaves” made from plastic bottles

A chandelier made in the form of leaves will look quite unusual in any interior. A master class will show you how to make it yourself. It is made from ordinary plastic bottles, the color of which you can choose at your discretion.

Step by step instructions:

The bottles are cut into pieces of any size chosen for future leaves.
Each piece needs to be shaped like a leaf.
Using a soldering iron with a thick tip and a one-sided bevel, it is necessary to melt the sections of each workpiece so that future leaves look more impressive.
Also, using the edge of the sting, it is necessary to give the workpiece a leaf structure. This should be done extremely carefully, as you can easily melt a hole in the plastic. A leaf with streaked veins and melted sections will look complete. Since a plastic bottle has cylindrical shape and when heated, the plastic is deformed, as a result the leaves turn out to be very impressive.
A hot needle melts several holes for fastening at the base of each leaf.
Using thin wire, branches are formed and screwed to a steel wire frame.

If you make new chandelier in the form of leaves as a lampshade for a floor lamp or table lamp, it will be a harmonious complement to the chandelier that turns the room into a forest.

New life for an old chandelier

Surely, in many living rooms there are still chandeliers that are a pity to throw away, since they are a memory of some person or event.

In order not to throw away an item, you can give an old chandelier a new life:

First, it should be washed, degreased, plastered and painted.
The decor for an old chandelier can be made in the form of decoupage, you can update the sockets by making them in the form of influxes of candles using hot glue, not forgetting to then tint them.
You can make original pendants at your discretion from existing beads, buttons and other elements.

How to decorate a chandelier with your own hands (video instructions)

The old chandelier is still in a new look for a long time hang in its place and please the eyes of its owners.

A do-it-yourself chandelier will add an original twist to the design of a kitchen, living room, nursery or any other room and will become a bright, unique accent to even the most unremarkable, ordinary interior.