Just a few years ago, CDs were actively used for data transfer, but today they are almost completely a thing of the past. Nevertheless, with the help of ingenuity and simple engineering skills, you can create fantastic things, including household lamps made from disks with your own hands.
There is nothing difficult to complete all stages yourself. The discs are extremely easy to process, since the material is flexible and pliable. Moreover, on the Internet you can find a huge number of ready-made schemes that can be easily supplemented and create a truly unique work of art. Building your own lamp has never been so much fun.
What format of the lamp can be created?
Many engineers are interested in what can be done from banal CDs. The answer may come as a shock, but it is absolutely true: everything you can do with your imagination. The shiny side can be used as a reflector for a garland, chandelier or individual lighting lamp.
In order to make a lamp from disks, you will need a number of tools and additional spare parts, which can be easily purchased at a specialized store:
- the actual disks;
- some wire;
- electrical tape, hot glue;
- LED strips or lamp housing;
- power plug;
- engineering set.
As practice shows, every man has everything necessary to make such a craft. There is some possibility that homemade lamps made from disks with your own hands may not work the first time, but do not despair - you will be able to find a mistake or defect, eliminate them and get a working device.
Main stages of work
So, if you really want to get unique lamp, you should start by creating the body of the future device. You can shape it using hot glue, but working with thin disks is problematic. To solve this problem, several dozen CDs are most often glued together to create a weighty case.
Then pass the power cable through the main hole, strip it and attach a lamp socket to one end. You can connect these elements using modern plastic fasteners, and soldering them together. However, it is worth understanding what is required high quality insulation connections to eliminate the possibility of electrical injury.
Remember that the discs must be positioned with a shiny surface facing the lamp, as it acts as a reflector. Thanks to this, the light acquires a brighter and more saturated hue, so it becomes possible to use sources of lower power - the result will be the same.
A power plug is attached to the free side of the cable, for installation of which solder or mechanical method. Modern technologies allow you to eliminate the need for solder, but the decision is up to the engineer. After that simple lamp from CDs ready.
As you can see, there is nothing difficult in creating unique lamp with your own hands. Try, use your imagination and search for information on the Internet to surprise not only your guests and loved ones, but also yourself, since each similar product can perfectly complement your interior design!
Nowadays, information carriers such as CDs are gradually fading into the background. Don’t rush to throw away iridescent circles that have become unnecessary; they can become an excellent material for creativity.
Second life for discs?
There are many ways to give a second life to old CDs, in this article you will see some of them. Crafts made from CDs can become great solution for the interior and garden, or just to help you have an interesting time, simultaneously developing creative thinking.
Creative people have long invented a huge number of options beautiful crafts from discs for children and adults, you just have to reproduce their ideas, and maybe come up with your own.
Throw away such a wonderful and interesting material- a huge mistake. Using CDs you can make unique interior items, original and stylish gifts, decorations for your dacha and garden: whatever your heart desires and whatever your imagination and perseverance is enough for.
Check out some ideas for creative uses for old computer disks and create some wonderful new things with your own hands!
LED lamp
If you urgently need a new original lighting fixture– old disks will come to the rescue. This craft can be used both in home interior, and at the dacha.
You don’t need any special materials for this work: the main condition is just to use a little imagination and patience.
Be sure to follow our detailed step-by-step instructions:
You will need 12 scrap disks, a protractor, metal staples or paper clips, a lamp socket and a thin drill bit.
First, we divide one of the disks into five identical segments. For these purposes, use a protractor: the angle between the segments should be approximately 72 degrees. This disk will serve as a stencil for the rest.
On the segment line, approximately 3-4 millimeters from the edge, drill five small holes. Next step: put the remaining disks in a stack and using the first disk (placing it at the very top of the stack) make exactly the same holes in the others.
In order for the craft to be strong and hold well, you will need support rods. Rods from ballpoint pens: into the holes we just made we insert the rods necessary to act as guides.
If you used really thin, correct drill, you don't even need to fix the holes: they will fit perfectly.
The lamp is almost ready, now we attach the remaining disks to the structure with brackets.
Now all that remains is to work with light: the last stage you need to screw the required lamp into the socket.
Flower
If you were sorting out old boxes at the dacha and found a lot of unnecessary disks, there is great way use them to benefit the beauty of your site. Crafts made from disks for the garden look very original and interesting, in addition, they are incredibly easy to make.
In this mini-lesson, I suggest making small flowers from discs to decorate a garden, vegetable garden or yard at the dacha.
Note!
The tools for this craft do not require anything unusual: required quantity disks (it all depends on how many flowers you are going to make), a candle, scissors and paints to make the flowers more vibrant.
The manufacturing process does not require special skills, it is very fast, but at the same time it will captivate you from the first second.
All you need to do is carefully melt the disks over a candle (remember safety precautions: it is best to do this indoors and have some water nearby to put out the fire in case of danger) so that the plastic goes into beautiful waves, similar to flower petals.
I suggest step by step instructions manufacturing beautiful rose from disks:
- First you need to cut the disk evenly along the entire length of the radius and heat one edge of the cut over a candle.
- Once the plastic is warm and soft, take a pair of pliers and use them to turn the edge slightly to the side.
- Slowly turn the disc over the flame and continue bending the molten fragments.
- At the end you should get a small spiral, which will become a rosebud.
- You can paint it any color, attach a wire stem, cut leaves from other leaves and form a whole flower bed! It all depends on your imagination.
So today you learned how to do a few simple crafts from old disks. I hope you found this lesson useful and learned a lot from it.
Note!
Photos of crafts made from disks
Note!
Thanks to the development of new technologies, storage devices such as CDs are gradually becoming a thing of the past, replaced by flash drives and memory cards. Most PC users have a huge number of drives left that will never be used. In order not to simply throw away unnecessary discs, they can be used as material for various crafts. One of such products could be a DIY chandelier made from disks.
Chandelier design
To make a high-quality and beautiful chandelier, you will need 12 disks with a double mirror layer. Tools you will need include drills, pliers and wire cutters. Connecting the disks to each other can be done using brackets, for which any soft wire or paper clips. An electric light bulb with a voltage of 220 volts, screwed into a standard socket and suspended on a standard mount, is used as a lighting source. The cartridge is connected to the circuit using a cord and a switch. To make a high-quality chandelier, it is necessary to perform a number of mandatory operations.
Sequence of making a chandelier
- To accurately drill holes, you need to prepare one disk as a stencil. To do this, the disk is divided into five equal sectors, and then, retreating from the edge of 5 mm, five holes with a diameter of 2 or 3 mm are drilled.
- Should be placed in a storage box required amount disks. A stencil is placed on top and the first hole is drilled through it, passing through all the disks. For fixation, a match or thin wire is inserted into the hole. Another hole is drilled on the opposite side, which is also fixed. After this, all other holes are drilled.
- The lamp socket is installed in the first disk, in a standard hole that does not require expansion.
- To secure the disks to each other, you need to prepare 30 mounting brackets in advance. Approximately one paper clip is used for three staples. They are made using wire cutters and pliers.
- The lamp is assembled sequentially, using brackets inserted into the hole and bent from the inside. The discs on the brackets must be held completely free in relation to other CDs.
- Before fixing the adjacent disks, an electric lamp is installed inside the lamp. Lamps work best, although they don't produce sharp enough shadows.
- After securing the last disks, the lamp can be installed in a pre-selected location.
How to make a lamp from Paper
The time of CDs has almost passed, many people still have a large number of them - music, films, cartoons, outdated computer programs- with images of characters from fairy tales and films, flowers, graphic pictures.
They sparkle and shimmer with all the colors of the rainbow on one side, and on the other beautiful drawings. You don’t feel like throwing them away - and there’s no need to, you can use them to make a lot of original, beautiful and useful things for your home.
In addition, it is very simple to work with them - they already have the correct circle shape, which in some crafts will only need to be changed slightly to give it to a future product or decoration the right type. At the same time, they are easily cut with ordinary office scissors and glued to a surface made of almost any material.
It happens that some home interior items have lost their appearance, it is not possible to replace them with new ones, or it is simply a pity to throw away an old favorite thing that has served faithfully for many years. Discs will help give things a new life.
For example, you can decorate an old mirror with them, making them out of pieces different shapes and the size sparkling and shimmering in the rays of sunlight from a window or in the light of an electric lamp with all the colors of the rainbow - the original frame.
Can be done beautiful frame for photography, decorate the edges of the cabinet drawers with a mosaic of pieces of disks.
Frame for mirror or photo
You will need a lot of disks, scissors, paints, glue, thick cardboard, colorless transparent varnish.
First you need to cut out a frame from cardboard in the shape and size of a mirror or photo. Then cut the disks into pieces of different shapes - squares, irregular quadrangles, rhombuses, triangles.
Take glue and stick the figures onto the frame so that there is a distance of one or two millimeters between them. As a result, the frame will have a mosaic of iridescent geometric shapes.
When the glue has dried and the figures cut out from the disk have stuck well, use black ink or paint to carefully and carefully go over the joints of the figures. After this, the frame is coated with transparent varnish, allowed to dry and mounted on a wall with a mirror or photograph.
Mirror frames made from discs look mysterious and original.
If in an apartment interior doors with glass, the glass can also be laid out with a mosaic of discs. In this case, there is no need to paint the joints between the pieces, but simply cover everything with transparent varnish, then there will be a feeling of light and space.
Clock made from disks
An option is to purchase a clock mechanism with hands or remove it from an old clock, lay clocks of any configuration on the wall with disks, gluing them to the wall, and strengthen the clock mechanism in the middle.
Decorating walls with discs
On the wall in the room or in the kitchen, you can put out disks with beautiful pictures, selected by theme. interesting composition. Or you can use them to create your own painting.
To do this, you need to take the disks and paint their shiny side with black ink, when the ink is dry, mark the lines of the future image along it, and then go over them with something sharp - a thick needle, a special scraper or sharp knife with a thin blade and a sharp tip.
Iridescent lines on a black background will look very beautiful - you can draw anything you like: unusual birds, flowers, an abstract design. And hang the discs on the wall in any order.
Decorating the kitchen with discs
In the kitchen, discs can make an unusual “apron” in the work desk area. It will look extremely original, and the discs will not be inferior in performance properties tiles– they are also easy to clean from splashes of fat and juice from vegetables and fruits.
The principle of working with them is the same as with frames for mirrors and photographs - just stick them on the wall.
Whether for a room or a kitchen, you can make a mosaic panel from disks by gluing pieces the desired shape and colors onto cardboard, and then covering the composition with clear varnish.
Household items made from discs
The discs will make an excellent hot plate. IN in this case– the disk will play the role of a base; you need to put a nice cover made of fabric on it, and the stand is ready.
It will be original to update the tabletop with cut pieces of disks coffee table. To do this, cut them, fix them on the tabletop using a plasticizer in any order or by making a pattern out of the pieces, and then fill the tabletop thin layer clear varnish, making it even.
The coating will be durable. The tabletop will sparkle and shimmer beautifully.
You can make a holder for women's earrings from two disks and a thick tree branch.
The core of the stand is made from a smoothly processed branch, ground to the diameter of the hole in the center of the disks, one disk will be the base, the second shelf, make holes in it and insert the earrings into them.
How to decorate a suburban area with discs
There is room for creativity and imagination. For example, from old car tires and disks you can make a flower bed, decorating it with a mosaic of shiny pieces outer surface tires
Is it possible from rubber tire cut out a peacock, and make the tail from whole round disks - to do this, you need to glue them in pairs with their shiny sides facing out, and then make them into a large triangle-tail, gluing the glued blanks in pairs overlapping.
On country fence The discs can be used to create a huge iridescent caterpillar. You can paint the disks to look like a ladybug - red paint, make spots with black and draw a head, and place them on fruit bushes and trees.
New Year's decorations from disks
Due to the fact that the discs shimmer in the rays of light with all the colors of the rainbow, they will come out beautiful snowflakes To New Year's holiday– they are easy to cut with scissors, you can cut out the most intricate patterns. You can hang snowflakes on the Christmas tree and on the walls.
You can cut the disks into small pieces, thickly cover an ordinary ball with them and hang it from the ceiling on a thread - it will rotate and sparkle, reflecting the lights of New Year's garlands.
The application can be very different. You can use discs to make an interior curtain similar to a bamboo curtain - assemble the discs on long threads. They can make an ultra-modern necklace, a refrigerator magnet, a vase, a candlestick, a stand for ballpoint pens and pencils, a box, or even decorate a summer bag.
Unneeded CDs are an excellent material for creativity, a way to spend leisure time - making certain things from them, and an opportunity to decorate a house or cottage in an original and unusual way without spending a lot of money.
Photos of ideas for fake CDs
Got a stack of unnecessary CDs? Don't throw them away! You can make them out of them beautiful lamp. In this tutorial you will learn how to make a very inexpensive and eco-friendly lamp from an old CD collection.
Interested?
Budget = 500 - 1000 euros
Time = 4 - 8 hours
Tools = found in every home
Difficulty = easy - medium level
Size = diameter 40 cm / height 28 cm
Materials
Tools
Step 1: Preparation
Before starting work on the lamp, you need to collect the necessary spare parts and check that you have all the tools.
Don't worry, most likely the right tools and materials will be found in the house. The rest can be purchased inexpensively online or in local stores.
How many CDs do I need?
To make a lamp the size of mine, you will need 900 - 1000 CDs (about 15 kg).
If you can’t find that many discs, you can ask your friends, colleagues or classmates: I think many people want to get rid of old CDs (old music discs, various free discs from magazines, recorded films, etc.).
Fiberboard circle
diameter 20 cm / height 1.5 cm
easy to find in hardware stores
Electrical connectors
12 connectors
The size of the connector should be determined by the diameter of the steel wire: the steel wire should fit into the hole of the connector.
Steel wire
5 m with a diameter of 2 mm should be just right.
Lamp socket + electrical wire+ switch + plug
You can find an already assembled version or make it yourself. Choose the size and style according to your design taste. I think it is better to take a wire at least 2 m long.
Fluorescent Powersave lamp E27
In principle, any energy-saving fluorescent lamp will do. If you want to install a smaller lamp, you need to take the appropriate one.
Silicone
Make sure that the silicone you buy is transparent, you need 2 sticks of the largest size.
Rubber feet
3 pcs.
You need small rubber feet with a diameter of about 2 cm.
Step 2: Making the Bottom
Take a circle from fiberboard, and using a compass and ruler, divide the circle into 12 sectors.
Connect the division points with lines to determine the center in order to insert the cartridge, steel wire into it, and also mark the places for the rubber feet. You can see in the photographs what it should look like.
Use a drill to drill the required holes.
Cut 6 pieces of steel wire using pliers, each length is 1 m. Bend each piece into an arc using a vice or pliers.
Now you need to attach it all to the bottom of the future lamp:
1) secure the 3 rubber feet with bolts and a screwdriver
2) Secure the lamp socket in the center hole.
As a result, the cartridge should “sit” in the center of the lamp.
Step 3: Making a lattice and a sphere from CDs
Secure the 6 arc-shaped pieces of wire by inserting both ends into the holes.
Now you need to wrap the arcs with your hands or pliers to the desired shape. The result should be a lattice in the form of a sphere (SEE PHOTO).
Unnecessary edges of the wire can be cut off with wire cutters. The result will be a grid of 12 steel wires in the shape of a spherical cage (SEE PHOTO).
Now you can start stringing CDs. First you need to fill only 6 rods close to the center with disks. Alternate layering of discs between rods (place a layer of 3 discs across one rod at a time - SEE PHOTO). Each disk must lie on 2 adjacent ones. Every 5-10 layers, check that the discs lie evenly and symmetrically. Fill the space between the rod and the discs with silicone from a gun.
Repeat this procedure until the discs begin to overlap each other again. This will happen when the stacks of discs are approximately 6 cm high.
At this point you need to string 6 disks in a layer one by one (SEE PHOTO). As before, every 5-10 layers you need to glue the space between the disc and the rod with silicone. As a result, there will already be 12 stacks of disks.
Continue stringing onto 12 rods as long as the size allows, then move on to 6 rods again, stringing 3 discs alternately.
The 6 stacks of disks should converge toward the center. Be sure to install the E27 bulb in the socket first, as the discs will block access to the socket at the top.
IMPORTANT:
Step 4: Top of the Lamp
When the height of the stacks of disks reaches approximately 26 cm, you need to wrap each end of the wire towards the center. All excess wire must be cut off. The result will look like in the PHOTO.
Now you need to clamp the edges of the wire. Divide the circle (2 disks folded together) into 12 sectors.
On each of the 12 drawn radii, mark 2 points for installing an electrical connector. Using a drill, drill 24 holes. Make sure the distance between the two holes on each radius fits the connectors you have.
Disassemble the electrical connector to remove the 12 metal connectors.
Assemble the top by placing a connector on each wire, secure the top disc to the connectors using bolts and a screwdriver.
Step 5: Turn it on!