Do-it-yourself fencing for flower beds made of metal. Decorative fences for flower beds made of stone

Zoning of plots – required element landscaping of a dacha plot of land. For these purposes, you can make a fence with your own hands from a variety of materials. Borders can also include paths, a cascade of flower beds and hedges. It should be noted that experts advise dividing the land area into the following zones: residential (10%), house adjacent (15%), recreation (5%), gardening (70%).

The variety of flower bed options makes it easy to divide the area into functional zones

Traditionally, to the main functions that are performed different kinds fences include:

securing boundaries;
protection from attacks by third parties;
restriction of direct penetration sun rays and winds;
ensuring privacy;

For a fence, you can use any available material.

For the construction of boundary fences, almost any factory or improvised materials are used.

Wood and its processing

Wood is an easily processed material available in our country. When processed correctly natural structure serves as an independent element. Painted in . But at the same time wooden fence exposed to natural phenomena, therefore short-lived.

Wood wins among materials for its ease of processing, naturalness and moderate low cost.

The structure requires annual maintenance (painting, preventing the penetration of insects). Under shock loads, the material quickly becomes unusable.

The following application options are presented:

Garden picket fence, that is, processed, installed in parallel wooden planks. can be solid or made in the form of a lattice. Can be used for a vegetable garden or recreation area.
Plank fence. It is distinguished from a picket fence by the continuous method of fastening and the use of both edged and unprocessed boards of approximately the same width.
Palisade One of the most ancient types of fencing. It consists of wooden stakes tightly adjacent to each other, driven into the ground. The security function is increased by sharpening the upper part of the structural elements.
Ranch fence. It is represented by fastening timber (boards) in a horizontal plane with large openings between them. It can be made from processed blanks, but this requirement is not necessary.
Wattle fence. Economical antique fencing that does not require financial costs. It is made by driving stakes into the ground and intertwining them with young shoots of trees and shrubs. or vines can become the highlight of the outdoor decor of the site.

Wood coating protective compounds allows you to preserve the structure of this raw material for many years

To avoid premature aging wood and its corrosion, be sure to carry out treatment special compounds or paint the finished structure.

Metal and its derivatives

Metal products are in second place in demand in the manufacture of various fences.

Metal fencing greatly benefits from its practicality and long service life.

They are used to produce beautiful designs, very different in price and aesthetic perception, such as:

(corrugated sheeting) – easy to install metal product, with a service life of at least 50 years. Produced in a variety of colors. However, its appearance is simple, and the product is subject to deformation.
. It does not limit the penetration of sunlight into the selected area, but also does not protect from the wind. It is made from metal in several designs: chain-link, corrugated, . The chain-link is distinguished from the corrugated weaving method; the second creates a more static plane, for fixing which the distance between the supports can be 5 meters, while with the first - no more than 3 m. The positive characteristics are complemented by the possibility of using a mesh fence as a base for the growth of climbing plants .
Welded multi-element structure. A huge number of metal decorative elements can be purchased at hardware stores. At home, they complement products made from metal picket fence or pillars. The process is labor-intensive, requiring preliminary calculations, and when performed, welding skills. Made for the garden with your own hands, it will bring great aesthetic satisfaction.
Forged products are the elite in the world of fences. They are divided into utilitarian, made by cold forging, decorative (in most cases, made to order) and combined. A small one will emphasize the good taste of the owner.

Forged products emphasize the sophistication of style

Stone and plastic

No less common are fences made from the following materials:

neatly executed low brickwork serves as an excellent fencing, and its types (clinker, red, silicate) allow it to fit into any design solution for the design of a courtyard;
natural stone is one of the most durable materials, not exposed to the effects of water and sun, but its uneven contours present some inconvenience when constructing a fence made of stones, and are also unsafe for small children;
metal mesh with natural or natural filler as a border looks impressive - they are voluminous and impressive, installation is simple, but requires time for stone filling;
the use of eight- or five-wave slate simplifies the task of installing a level fence several times, while installation takes little time, but the material is fragile and dangerous.

Due to their light weight, such fences can be moved to a place of your choice without much difficulty.

The cheapest in cost, but not of aesthetic value, is a series of fences that use improvised means and materials (tires, etc.). Design options are limited only by the imagination of the owner of the farmstead, and the use of broken equipment as separate flower beds, for example a broken wheelbarrow, will make the interior exclusive.

Using tires as a fence for a flower garden allows you to save a lot of money

Do it yourself

Before implementing your plan, you should decide whether the fence will be permanent, or over time it will have to be moved due to a change in the layout of the site.

Scheme for creating a flowerbed yourself

If the final decision has not been made, then it seems reasonable to assemble decorative fences with your own hands.

For flower beds

One of the options for a quickly erected and no less quickly dismantled low fence is represented by a mini picket fence for flowers. You need planks that are 20–30 cm larger than the height of the fence wall (for immersion in the ground), as well as crossbars. The structure is assembled in sections, which can represent the whole side of the fence or part of it.

Options for future fence sketches

The work is carried out in the following order:

On a flat piece of land, crossbars are placed at a distance equal to 1/4 of the height of the fence on each side. Fix the position with the outermost boards of the fence. As stated earlier, they must be longer than the others in order to sink into the ground.
At equal distances, fixed by preliminary markings, the section is filled with planks. Pay attention Special attention to the same height of each structural element. Fastening is done with nails or self-tapping screws of the required size.
Install the section level in a strictly vertical position. Alternating blows of the mallet on the support boards, the structure is gradually immersed in the ground. To avoid premature rotting of the formed canvas, it is recommended to leave a few centimeters before direct contact with the ground.

Drawing for installing a fence at the dacha

Intermediate long specimens of a picket fence are securely fixed in the ground

In order to support posts served for a long time, parts immersed in the ground are treated with antiseptic materials, fuel oil or bitumen.

For the front garden

Complete harmony of the entire area

A common option that combines reliable design and reasonable price is a fence made of metal mesh. To make it you will need locksmith tool, welding machine and the ability to use them.

Calculate required amount material, taking into account the following:

the length of the post consists of a ground part equal to the width of the mesh, a distance from the ground (5–10 cm), and a part installed in the ground to a depth of 35–45 cm, having a square section of 30x30x1.8 mm;
the pillars are installed at intervals of 1.5–2 m, and the required number is obtained by dividing the perimeter of the fenced area by the distance between the pillars;
1 m wide mesh is purchased in quantity, equal to length perimeter, while the factory packaging includes 10 m;
the total length of the corner is equal to two perimeters of the enclosed area, the shelves are 30x30x1.8 mm;
rod for attaching a mesh with a diameter of 8–10 mm.

Option for designing a flower bed made of mesh

Step-by-step instructions for construction and installation are as follows:

Using measuring instruments, posts and a cord, mark the area and determine the installation location.
In marked places, dig holes to a depth of 35–45 cm to the diameter of a drill or shovel.
Disband square pipe to the required measuring areas. To avoid corrosion when in contact with the ground, their lower part should be coated with bitumen.
Install the pipe in the pit strictly in a vertical position. Temporary fixation is performed. Fill the hole with concrete solution mixed in a ratio of 1:2:3, where the first is cement, the second is sand, and the third is filler (crushed stone or other).
After the concrete has dried, securing the pillars, a corner along the upper edge of the pillars and a counter one at the bottom, with a small indentation from the ground (5–10 cm).
The structure is primed and painted in the preferred color.
Prepare the mesh for installation. For these purposes, the roll is unwound on a flat area and the loose side joints of the mesh are put in order. She is reeled in again.
Then the mesh is attached between the corner shelves using a rod, welded at small intervals in pieces of 10 cm.

Stage of arrangement of holes for pillars

To care for the front garden, a fence a little more than a meter high must be supplemented with a gate. It is made in the same way as the main fence.

Decorative fence

Do-it-yourself decorative children's fences are assembled from a material from which the likelihood of injury is minimal. As a rule, to make a decorative fence in a kindergarten, prefabricated structures are used polymer based or with .

Application plastic fencing significantly increases safety

Such decorative fences are characterized by a high level environmental safety, exceptional strength, resistance to moisture, temperature fluctuations, low maintenance and easy installation.

For self-installation For a sectional garden, fasteners and decorative elements are purchased. The required quantity is calculated taking into account production standards. The most common sections are those with a height of 71 cm and a width of 122 or 130 cm by 244 cm.

One of the options for installing a plastic fence

Their undoubted advantages include sufficient dimensions and the inability to injure a child. They have two installation options, where the first is represented by a T-shaped ground support, installed on any site without rigid fastening, the second - with the supports immersed in the ground.

One of the options for a plastic fence for a flower garden

It should be noted that different manufacturers vary the dimensions and installation method at your discretion. Thus, in some cases it is necessary to carry out concreting with a diameter of 89 mm, on which guides should be mounted, and only then the structural elements should be inserted into the grooves. The options can be seen in the photos posted on the manufacturers' websites.

Every owner local area tries to ennoble it as much as possible or according to his aesthetic idea. Fences and borders play an important role in decorating a site. They will help to implement zoning, for example, to separate part of the space for recreation with a barbecue, benches, gazebos. With their help, you can select beds for vegetables or berries, as well as decorate flower beds in a beautiful and original way, and preserve the geometry of flower beds. In this article we will look at different types of decorative fences and methods of their manufacture.

Such fences will not only give a neat appearance to the site, but will also cope with their intended purpose - they will protect the plantings from careless guests and serve as a barrier for domestic animals. And here it doesn’t matter at all whether it’s a dacha where only a few seasons are spent, or a private house for year-round use.

It should be noted right away that all of the fencing options listed below can frame absolutely any shape of paths, flower beds and create dividing zones. There are no limits to imagination in these works; they are mounted in the form of strict geometric shapes or non-standard lines.

Plastic decorative fences

There are a huge variety of fences of this kind on the market, thanks to the technical characteristics of the material from which they are made. Its thermoplasticity makes it possible to create borders for paths and fencing flower plantings, front gardens of various shapes, and a special lamination method - in various colors.

Here you can give preference to a strip or sectional type border, which will serve as a border marking garden paths, and will also become an additional decoration for plant compositions.
Each section is equipped with pegs, so the installation process consists of light pressure until the supports are completely embedded in the ground. Installation can be carried out both on absolutely flat surfaces and on ground with a slight slope.
Decorative fences for a summer cottage made of plastic can imitate wooden picket fence, wattle, clinker or masonry, forged elements. Typically, such sections are made in height from 13 to 20 cm.

Decorative wooden fences

The most popular material for making a yard look well-groomed is still wood. Such fences look quite relaxed in the landscape and do not create any disharmony.

Another advantage of the material is its availability, because for finishing, for example, flower beds, any lumber is suitable: boards, slats, pegs, logs and even branches. Here we mean the production of standard fences, only in miniature sizes.

Before carrying out any work, wood requires mandatory processing:

the lower part of the supports, entering the ground, must be burned or dipped into liquid roofing material;
all other structural elements are impregnated with special solutions that slow down the rotting process and protect from insects.

"Plank fence"

To make a structure 40 cm high to frame a flower bed 70x70 cm you will need:

4 beams 50x50x700 mm;
8 boards 20x100x700 mm (here, if desired, you can use both edged and unprocessed lumber);
32 wood screws or the same number of nails;
screwdriver, hammer.

Stages of work

Drive the supports into the ground 700 mm from each other, check the vertical and adjust their height.
A board is attached to the top of the beam in two places, where its end part should not protrude beyond the edge of the peg.
The second cross member is mounted at a distance of 100 mm from the bottom edge of the board.
The same manipulations are performed on other sides of the flower bed.

"Lattice"

This lightweight slatted fence can be used to enclose a flower bed with tall plants, such as window sill or cornflower. If you make it in a larger size, then it will be perfect for separating a recreation area.

To implement it, one section with dimensions 900x630 mm will require:

for supports 2 bars 30x30x950 mm;
for crossbars 2 pieces 20x30x900 mm;
12 slats 10x20x520 mm;
12 wood screws 3x25 mm, 4 screws 3x40 mm.

Stages of work

The section is assembled on any flat surface. 30 mm is removed from the upper parts of the supports, and the logs are fastened with 3x40 mm screws.
Having retreated 500 mm from the attachment point of the upper cross member, a similar installation of the lower beam is carried out.
The slats are fastened first from left to right, using 3x25 mm screws. At the point of attachment of the upper cross member and the support, the first rail is mounted, to the lower frame - at a distance of 150 mm from the support. Their subsequent installation to the purlins is carried out in increments of 150 mm from the previous attachment points.
Installation of slats is done in a similar way, now from right to left. The result will be a diamond-shaped pattern.
You can fence any area, even if it has an irregular contour, by making the required number of such sections.
Important: when making a square or rectangular fence, the material consumption will be much less than when constructing a multifaceted structure.
The finished structure is painted alkyd paint one color or cover protective varnish. You can give your fence a more “joyful” look if you paint it in multi-colored tones.

"Wattle"

This kind of fence can be completed in a fairly short time.

It is better to cut willow, birch or apple twigs for its production in spring or autumn, the thickness of which should not exceed 2 cm.
Quantity consumables determined by the height and length of the structure. In general, to implement this idea you need stakes or bars, rods, wood screws, and wire.

Tip: instead of vines, you can use old multi-colored hoses or wires with a rubber sheath.

Stages of work

As a rule, vertical supports are installed in increments of 0.5 m.
Weaving starts from the bottom row. The vine is fastened to the first support using wire or screws. Next, the rod is passed in a horizontal direction, bending around each bar. It is recommended to fix the joints of the rods with wire.
If there is no desire or opportunity to study self-production fencing of this kind, you can purchase ready-made option. For example, modular fences up to 0.5 meters high made of natural pine are offered. Treatment with antiseptic solutions and painting with varnish to give the slats an attractive appearance is carried out in the factory.

Those who care not only appearance fence, but also its strength and resistance to precipitation can opt for products made from wood-polymer composite. This material makes it possible to produce sections of any complexity and configuration.

Decorative fences for flower beds made of stone

Cobblestones of various shapes are selected for masonry, thus creating a fence of the “medieval” period. Here the rough texture of the stones will create a wonderful contrast with delicate flowers and greens. Without exaggeration, it will last forever.

Stages of work

The material can be sandstone, dolomite, shungite, both round and bedded. As a rule, the first row is laid out on concrete mortar, trying to use slab-like rubble.
They are selected in such a way that the same row height is maintained. In this case, the laying is done “in a staggered manner”, where the seams between the top and bottom layers should not coincide.
A sand-cement mixture will help give additional reliability to such masonry.

Metal decorative fence

Any product made from such material has a fairly long service life, but at the same time it requires maintenance - annual painting. The fence can be purchased at finished form or order according to an individual sketch.

But it is quite possible to make it on your own; for one section (900x550 mm) you will need:

supports - 2 reinforcements Ø 12 mm and length 950 mm;
crossbars - 2 reinforcements Ø 12 mm, length 900 mm;
horizontal crossbars - 5 rods Ø 10 mm, length 39 cm;
decorative elements - 6 rods Ø 10 mm, length 14.5 cm;
welding machine.

Stages of work

Step back 50 mm from the top of the supports and weld the cross member, measure 40 cm from it and mount the lower part of the frame.
Horizontal crossbars are attached in increments of 150 mm.
Next, decorative vertical elements are welded in a checkerboard pattern. To do this, first a rod is welded, departing 100 mm from the lower cross member, and in the next section it is attached, counting the same distance, but from the upper cross member.
Such a fence is installed by pressing its supports into the ground, leaving a distance of 100 mm from the ground to the bottom of the frame.

Manufacturers also offer galvanized borders, intended not so much for fencing flower beds, but for creating them. They are available in heights of 17 cm and lengths from 25 to 100 cm, which allows you to design flower beds quite in an original way. Thanks to the universal connection, there is an excellent opportunity to assemble a flowerbed of different sizes and in the form of any geometric shape from them.

Decorative concrete fences

Of course, when many people mention such material, they associate it with a massive, gray fence. But don’t rush to give up concrete products; there are various options borders intended for garden paths, fencing lawns and decorating flower beds.

These products have not been produced in dull colors for a long time; now they can be of different shades and have a pattern on the front surface.
Making this kind of fence with your own hands will not be difficult if you use decorative fence molds made of polyurethane or plastic.

Stages of work

All work consists only of lubricating the matrix and filling it with concrete mixture.
Next, you need to let the solution harden (24 hours is enough) and you can remove the finished section. Thus, the required number of curb stones is prepared.

Some tips

the matrix can be lubricated with ordinary vegetable oil;
For the solution, take one part of M250 cement and two parts of sand, add enough water to make the mixture thick;
The more sand in the mixture, the darker the product will be.
if you plan to paint a concrete fence, then before doing this it is necessary to treat it with a deep penetration primer.

Decorative brick fence

This material firmly holds its leading position as a fencing for lawns, flower beds, lawns and paths in the garden and country house. This is due to its characteristics, availability and ease of installation.

Stages of work

Usually the brick is laid along the perimeter of the flowerbed at an angle on its end side, creating a kind of “jagged” fence.

But there are several more ways to do masonry:

lay clinker around the flowerbed, forming a circle or oval. The second row is done in the same way, making sure that the seams do not match the previous layer. Masonry is done without concrete mortar, so the design is unreliable. But it can also be done using a sand-cement mixture;
perform the first two rows using conventional masonry using concrete mortar. The clinker in the next row is placed on a spoon (this is the narrow and long side of the brick). Since the width of this layer is greater here, the alignment is performed according to inside masonry;
the brick can be placed on the butt (on its narrow, short side). The seams between them can be quite wide - about 2 cm.

Photos of decorative fences made by yourself

Car tires are most often used to create flower beds and flower beds. They also separate beds, paths, and lawns by simply digging them into the ground;

Beer bottles can serve as a mini-fence by placing them upside down. The use of bottles made of white, green, and brown glass will help to add even more originality to this design;

Plastic 5-liter water bottles will work just as well. They are filled with colored pebbles or sand so that they do not lose their shape, and the top is painted with any color;

logs Ø 15-20 cm are dug or driven into the ground close to each other; any lumber left over from the construction site is suitable for this purpose.

Every owner of a summer house, vegetable garden or garden dreams of creating on his land space perfect design. And for this it is not at all necessary to purchase expensive factory-made fences; it is quite possible to make them, for example, from the material left over after building a house, and using all your wild imagination. You can take one type of material or combine them, thereby giving the surrounding area an amazing and rather original look.

A DIY decorative fence will help you decorate personal plot, will give flower beds and flower beds a finished, original look. Fences for flower beds can not only transform the landscape of the garden, but also perform other useful functions:

Depending on the purpose of the fence, the type of plants, as well as the overall design of the garden, the height and design of the fence are selected:

The range of ready-made garden fencing is very large. However, if you show a little imagination, a decorative fence made by yourself can please you even more than the most beautiful ones modern products. There are practically no restrictions on the options for making fences for flower beds. Let's consider the most simple options from traditional and not so traditional materials.

Wooden fences

Tree - classic version, the most accessible and in demand. Plus it's one hundred percent environmentally friendly material, which will not harm plants and the earth. On the contrary, slowly decomposing wood will nourish the soil and plants.

Decorative fence for a flower bed made of sawn logs

To decorate flower beds and flower beds, you can use boards, timber, small stumps, stakes, twigs, bars, saw cuts, etc.

Types of wooden fences

Important! The wood must be treated with an antiseptic, especially the parts in contact with the ground, so the decorative fence will last longer.

Wicker fences

Wicker flower beds and fences for the garden fit organically into country style, and the plants in such flower beds look especially cute. The work itself will bring a lot of pleasure.
To work you will need any flexible branches:

hazel;
willows;
grape vines;
raspberries;
cherries.

An example of a wicker fence for a summer house

It is best to prepare material for wicker flower beds in early spring, at this time the rods have good flexibility and are better cleared of bark. If the branches are not flexible enough, they are soaked in hot water.

Wicker fence installation

Tip: when weaving, you can take branches one at a time or several at a time. Very thin branches are often woven into bunches to create a beautiful chess pattern.

Wicker fences for flowers can be made in the form of a border, a fairly high fence, or in the shape of a basket. You can make a raised flower bed out of wattle fence. To do this, the sides of the flowerbed need to be protected with plastic film, drainage in the form of crushed stone and sand should be placed on the bottom and soil should be poured.

Brick fence

Brick as borders for flower beds in the garden is one of the popular options. can be very different. There are many advantages to such a fence:

Attractiveness. Unless, of course, it’s not an old crumbling brick, but, for example, a solid colored version;
A brick border looks organic with brick walls houses and plants;
Strength. The brick curb is durable even without the use of cement;
A brick dug into the ground protects flower beds well from weeds.

DIY brick flowerbed border

Decorative fences made of natural stone

– this is beauty, harmony and durability. You can create beautiful flower beds and flower beds from natural materials. You can use any mineral for a garden fence: pebbles, granite, sandstone, dolomite, marble. You can make it with your own hands from stone the following types decorative fencing:

Pergons and gabions

Natural stone in a welded mesh allows you to create flower beds and fences for a garden of any height. Multi-tiered or tall ones look great in combination with the natural landscape.

Installing such a fence is also not difficult. You need to assemble a box from welded mesh and fill it with any stone, the main thing is that the size of the backfill matches the grid cells.

Can be used on any basis. Rack rods with a diameter of about 8 mm are used as the base.

The grate can be made from galvanized steel rods with a cross-section of 5 mm. In addition to stone, other materials may be present in the structure: tree cuts, glass, brick, concrete. After installing the flowerbed, its walls are lined with geotextiles, and soil is poured into which flowers can be planted.

Oh how good garden beds, spreading delicate aromas and pleasing the eye with a riot of color. However, it is not enough to simply dig up a bed and plant seeds; a real flowerbed requires proper fencing that will prevent the soil from crumbling and protect the delicate roots of the plants.

Before turning your garden plot into a masterpiece landscape design, decide whether your flowerbed will be temporary or whether you plan to install a fence that will last for more than one year.

Plastic modular fencing, which is sold in gardening departments, is quite attractive in appearance and very diverse. Such “fences” are installed in a matter of minutes and just as quickly removed in the fall or if it is necessary to dig up the soil.

Profiled profiles can also be used as fencing. plastic sheets(made of PVC or polycarbonate) or cellular polycarbonate. You should dig a narrow trench around the perimeter of the flowerbed, insert cut plastic into it, fill it and compact the soil.

Joints plastic panels It is advisable to coat it with construction adhesive or sealant. Cellular polycarbonate glued with one-component transparent glue.

The disadvantages of such fences are high price materials and their low resistance to mechanical damage. Plastic fences often warp during watering or precipitation.

If you have accumulated glass containers or plastic bottles, it's time to make a creative flower garden.

Option one - vertical single-tier

This method of arranging a fence is so simple that even a child can handle it.

Step 1. Prepare the container. We wash, remove all stickers, fill each bottle with soil/sand, and screw on the caps.

Step 2. Using a tape measure, measure the length of the bottle. We divide the resulting value in half. This result is the depth of the trench that needs to be dug around the perimeter of the flower bed. The radius of the bottle, accordingly, determines the width of the groove.

Step 3. Turn the first bottle upside down, insert it into the trench, add soil, pour it from a watering can, and tamp it down. We insert the second bottle tightly and repeat the tamping operation. We continue until the entire flowerbed is fenced.

It is important that the “fence” does not wobble!

You don't have to use the same bottles. By alternately inserting one and a half and half liter plastic bottles, you will see how the fence becomes much more interesting.

Step 4. If the bottoms sticking up do not cause joy, you can decorate the fence by painting it with any paint for exterior use. You can also use flowers cut out of plastic and glued to the fence in any desired order as decoration.

Bottle flower beds

Option two - vertical multi-tiered

Stock up on enough fertile soil, a shovel, a watering can and previously prepared bottles.

To begin, we dig a groove around the perimeter of the outer, largest ring of the flower garden. We insert a row of bottles, add soil to the level of the bottle bottoms.

We place the second ring inside the first. The second tier will rise above the first. Carefully dig a new ditch, insert bottles and add soil to the center.

Narrow rings can be tied with wire around the perimeter to strengthen the walls of the fence.

It is not recommended to make an excessively wide multi-tiered flower bed, as it will be inconvenient to plant plants in the central rings.

Multi-tiered flower beds resemble a wedding cake. Plant low-growing flowers in them and enjoy the beauty of the garden.

Option three - horizontal

Step one. We prepare a sufficient amount of clean empty glass bottles and cut iron barrel across in two. The bottom can be left after making several drainage holes, or cut off altogether, which is more preferable.

Step two. Cooking cement-sand mortar. In a bucket, mix cement with sand and water so that the solution is thick enough and does not spread.

Step three. We put the barrel in the place where the flower garden will be located in the future. Using a trowel we place it on outer wall barrels a small pile of solution into which we immediately insert the bottle, pressing its neck against the iron. We apply a new pile of solution to the wall and insert the second bottle as close as possible. We continue until the barrel is completely framed by the first row of bottles.

Step four. We lay out the second row in the same way, placing the bottles on the first row in a checkerboard pattern. We continue until the barrel turns into a stylish flowerpot. While the cement dries (about two weeks), it is better to cover the structure with polyethylene. This way the hardened solution will be much stronger, and the risk of cracking will be greatly reduced.

Step five. If the flowerpot has a bottom, then pour crushed stone on its bottom, broken brick or other drainage. If you cut off the bottom of the barrel, you can immediately fill it with soil and plant flower seeds. It is recommended to decorate the upper part of this unusual fence with beautiful colored pebbles, shells, cones, or hide a noticeable strip of cement with moss.

Even if you and your friends are not car owners and don’t store old tires in your garage, auto repair shops will happily sell you several suitable used tires for pennies.

How to make a flower bed - flower

Tires can be dug vertically into the ground, subsequently painted in different colors, carved into unusual animal figures, or cut into petal-shaped tops. If you are lucky enough to become the owner of a tire from a tractor or KAMAZ, then it makes sense to place it horizontally, filling it with soil and breaking up a flower bed.

If you acquire several tires of different diameters, build a multi-tiered fence for a flower bed, simply arranging the tires like a pyramid. Of course, soil must be filled inside each ring before installing the next, smaller diameter.

Advice! For painting, use only waterproof enamels!

Video - DIY fences for flower beds made from old tires

We build fences for flower beds from bricks

If you plan to build a permanent flower garden, then you should take care of a reliable fence, for example, a brick one.

Prepare before construction following materials: bricks, cement-sand mortar, sand, level, tape measure, pegs, cord, shovel and trowel.

Step one. We make markings on the ground, determining the perimeter of the future flower bed.

Step two. According to the markings, we dig a trench about 10 cm deep.

Step three. Fill the sand with a layer of 5 cm and tamp it thoroughly, spilling it with water.

Step four. We lay out the first two rows of bricks without fastening them with cement and leaving a gap of 0.5 cm between the bricks. This is necessary to prevent stagnation of moisture in the soil and rotting of the roots. We check the evenness of the masonry with a level and hit the bricks with a mallet.

Step five. We drive in the pegs and tighten the cord to make laying easier. Lay out the third and subsequent rows without gaps using cement mortar. Immediately scrape off the excess from the wall. If desired, you can undo the joints immediately after laying.

The cement will dry for about a week. During this period it is not recommended to carry out earthworks and plant a flower garden. When the cement has set, add a layer of drainage, fertilizer, soil into the flowerbed, and plant the plants.

Advice! If you use bricks in the construction of fencing different color, then the flowerbed will be much more interesting.

If the flowerbed is small, then the bricks can be laid without mortar at all, filling it with a sand cushion. In this case, it is not necessary to lay the brick flat; a fence made of bricks installed in a sand cushion at an angle looks original.

You can also use natural stones and sand instead of bricks. The stones are laid without constructing a foundation, and the stones themselves are fastened together with mortar. It is advisable to lay it out so that there are minimal gaps between the stones.

Video - Options for fencing for flower beds

Fences for flower beds made of wood

Wattle is a classic of the genre. We drive in pegs or dry branches at equal distances, which we braid with flexible willow twigs. Finally, we pour soil into the fence and plant flowers.
Decorative fence made of boards. We lay out the boards in a row and nail the horizontal fastening lintels. We assemble several of these “panels” of the desired height. We dig several holes in the ground. We take the distance between the pits equal to the width of the panels. Insert into the holes wooden blocks, treated with an antiseptic and covered with bitumen on the bottom, after which we pour the concrete and wait for it to dry, making sure that the columns are strictly vertical.

At the end, all that remains is to nail the board panels to the posts, add soil and paint the fence.
Fence made of bars. Such a fence can be installed in compliance with single level all the bars, driving each of them into the ground to different depths. Don’t forget to treat the posts with an antiseptic so that the flowerbed lasts as long as possible.

Don't be afraid to experiment with your ideas non-standard designs for flower beds and decorating the garden in an original way. An old one can serve as a fence for a flower bed. wooden boat, plastic and ceramic dishes, flower pots, lined up, wooden two-wheeled wheelbarrow, large Wicker basket, antique chest without bottom and much more.

Also read the article on our website - how to make a flowerbed with your own hands.

Video - DIY fencing for flower beds. Design ideas

A fence for a flower bed is necessary in order for the flower garden to acquire a finished look. Thanks to it, the site looks more decorative and well-groomed.

This decor solves several other problems:

guests will know where not to step;
is created on the site uniform style;
flowers will be protected from pets;
you can divide the area into different zones;
the fence will prevent plants from growing over the area.

Plastic products are usually widely available in stores. They may have different shapes and colors. You can also purchase decorative fences made of wood or forged, but they are expensive. In view of this, it is better to make a fence yourself. Suitable materials include logs, stones, willow twigs, glass and plastic bottles.

Polymer border

Plastic curbs are widespread. They can be presented as:

ribbons;
barrels;
vases;
bowls.

The good thing about the tape is that it is not afraid of ultraviolet radiation. It is also very easy to install. Another advantage is that it does not allow plants to grow outside the flower garden. However, the service life is short.

Concrete products

Decorative bowls can be made of concrete. It is also used to make shapes such as polygon and square. You can install garden fencing for flower beds different ways: drown them in the ground or, conversely, make them rise above it. Advantages: resistance to temperature changes, moisture and sun. Products can be painted.

Metal fences

Making a metal fence with your own hands is quite difficult. Usually it is made to order by specialized companies. In this case, it is necessary to clearly understand what the fence should look like and know its dimensions. The presented products can be painted, but they are very expensive.

How to make a decorative fence for a flower bed with your own hands (video)

Self-made products

It is recommended to make fences from logs, twigs or pegs. They not only look impressive, but gradually decompose in the soil and will fill it with nutrients. In winter, wood freezes less than plastic; ultimately, the roots of the plant will be reliably protected.

Flower bed made of logs

You can make a fence for a flowerbed with your own hands from logs. The logs should be approximately the same height and diameter. It will go about 20 centimeters deep into the soil. They dig a ditch around the flower bed. The logs will be installed in it tightly to each other. Then their lower part is covered with earth. If you process logs special means and peel off the bark, they can last you half a century. If desired, the logs can be replaced with pegs.

Willow twigs

You can make a fence from willow twigs. Wicker fences look very attractive. The production process will require effort.

You can get willow twigs near a pond. Harvesting is best done in the spring. At this time, the bark is light in color and can be removed easily. The manufacturing process is as follows:

clear the bark from the twigs;
cut them so that each element has the same length;
Pegs are installed around the perimeter of the flower bed. Their diameter should reach 3 centimeters. The closer the pegs are to each other, the stronger the fence will be;
The weaving principle is the same as for baskets. First, the rods are passed in front of the stakes, then behind them;
after 3-4 rows have been made, the structure should be compacted - tap it with a rubber hammer;
the ends are secured by nailing them to the pegs.

Brick or stone fencing

Brick fences They look impressive in the photo. There are many options for styling the presented building material. It goes well with metal, pebbles, paving slabs, tree.

Features of choosing a type

Fencing for flower beds and beds is chosen based on the location of the flower bed and the style of the garden. The fence should be in harmony with the buildings located on the site. When located in the central part, solid and durable products made of metal or artificial stone. The design of the fence can be any: solid or consisting of individual elements.

Stone is often used as a material for flower beds. A border made from it looks noble, but it is recommended to use cement to fasten individual elements. In this case, large stones are pressed into the solution, and small ones are fastened with a mixture with the addition of glue.

If you choose brick instead of stones, its installation will be much easier. Brick fences Ideal for country style gardens.

Decorative fences in the garden plot (video)

Posting rules

The border for the flower garden should look good in the photo and in real life. The fence should be placed so that it is not lost on the site, but also does not stand out too much - everything should be beautiful and natural.
The height is selected so that guests and pets do not trample down the plants.
Concrete fences require burial into the soil. To make them decorative, it is enough to paint them.
They try to place metal and forged products in the central part of the garden. They attract attention and can become a real decoration of the site.

Installation features

You can make a fence with your own hands, there is nothing complicated about it. Installation procedure includes next steps:

First, make sure that all elements of the border are level;
determine the design trajectory of the flower garden;
dig a groove, it should be no deeper than 8 centimeters;
then you can dig in the curb;
if you plan to create a curved fence, you can use pegs so as not to get confused with the shape;
after you put up the fence from scrap materials, you should compact it;
the tamper can then be decorated bulk materials;
If the fence is not high, you should not dig a ditch.

Rules for combination with garden design

Borders made from scrap materials should look good, as in the photos in glossy gardening publications. It is important to decide on the general style of the garden and fencing in advance. If there are paths on the site, it is recommended to make similar material for the construction of the enclosing decor of the flower beds.

It is necessary that hand-made fences fit harmoniously into the landscape. They should not stand out sharply or be invisible. Connect your creativity and imagination! Garden borders can be a highlight summer cottage!

Original ideas

In the garden you can use not only metal fencing for flower beds, but also things that you used to actively use, but now they have become unnecessary utensils. Often real masterpieces can be made from scrap materials.

You can make an original flower garden from old clothes with your own hands. Just fill it with soil mixed with sand or stones, then plant the plants.
In the photo, a flower bed made from a shell will look original. It is recommended to plant annual alisum in it.
A unique fence made from scrap materials is obtained by using old plumbing fixtures. A fence made from an old bathtub or toilet will surprise all your neighbors.
The photo looks great at borders made of mesh filled with stones. They look very aesthetically pleasing. The components you will need are: wire, mesh, metal tongs, decorative stones. It’s easy to create the presented border with your own hands.

Types of fencing for flower beds (video)

Fences for flower gardens can be purchased at the store or made independently. Completely unnecessary things can make excellent borders that will become a real decoration of the garden.

Reviews and comments

Olga 09/08/2015

There are so many ideas and materials for decorating flower beds and garden beds! And I use the old fashioned way to fence everything off with stones and wattle fences :) I really liked the idea with the plates, but where can I get so many of them? The whole wedding service, it seems to me, is there in the picture, I went there :)

andreii 09/11/2015

I was inspired by the ideas from this article and today I’ve already “boomed” around my house, as many as two excellent flower beds. Please tell me how you can decorate these “newborn” flower beds using old ones car tires(of which we have quite a few a large number of)? Thanks in advance for your answer and I'm looking forward to new and original design ideas!

Nikolay 09/11/2015

I recently watched a video on YouTube on how to make shapes from car tire. In the end I made two flamingos and three piglets, although without a wolf) The children really liked it, now they are happy play scenes featuring new figures. I also recommend a European theme with gnomes and night lanterns, the main thing is to choose gnomes that will not look scary at night. And finally, molded paths made of cement, molds can easily be found on the Internet.

Irina Poddubnaya 09/14/2015

Very interesting ideas, I wouldn’t even have thought that it was possible to make such a masterpiece out of simple cans. At my dacha, I made a small flowerbed like this; it resembles a lake of blue flowers, decorated with swans made from car tires. If you use your imagination, you can come up with a lot of things.

Svetlana 09/22/2015

Now I am improving the playground near the house. I don’t want to spend money on expensive materials, since there is no guarantee that this beauty will not be taken out later, but improvised means for fencing flower beds are just right. Tomorrow I will suggest the girls to protect the flowers with bottles. I would like to see more information on the pages of the site about the possibility of improving the children's corner. I think this is relevant both for dachas and for residents of high-rise buildings where children play in the yard.

Elena Perlova 10/05/2016

geotextiles must be laid under the crushed stone to prevent weeds from growing. But even in crushed stone, over time, vegetation appears due to flying weed seeds. Roundup - growth is growing. We have to remove everything and add everything again....

Alexey Timofeev 05.10.2016

Plastic border is a rare sight in the garden. It spoils the whole look, even if hidden. It breaks, becomes deformed, all the work is in vain. Don't use it. This is harmful to your garden.

Add a comment