Buying a manual tile cutter is the main requirement. How to choose a manual tile cutter

If you need to cut ceramic tiles or, for example, porcelain stoneware, you can either use a grinder for these purposes, or buy yourself a tile cutter. But, once in the store, you will find that this tool is not only presented in a variety of options (depending on the manufacturer that produced it), but also has a clear division into manual and electric models. And how to choose a tile cutter so that it not only copes with the task assigned to it, but at the same time you do not have to overpay for it?

Manual tile cutters

no energy consumption (that is, you can cut tiles in rooms not equipped with electrical outlets);
ease of maintenance (you only have to wipe it after work and store it in a dry room);
light weight (and you can always easily move it to the place you need).

However, manual tile cutters of different models still have their own individual characteristics, for example, some of them thanks additional accessories can cut round holes. It would also be a good idea to immediately check with the sellers whether it is suitable this type tool for working with porcelain stoneware, or its functions are limited only to thin ceramic tiles for wall cladding.

The tile cutter you purchase will come in handy with special rulers and corner stops that allow you to cut tiles not only parallel to one of the sides, but also at a strictly measured angle.

Working with a tile cutter is quite simple, but beginners still cannot always cut tiles accurately and evenly. Sometimes excessive efforts do not lead to the expected result, but, for example, to splitting the tiles. Therefore, if you have never used such a tool, before starting work, read the instructions that came with it or watch its video version.

Electric tile cutters

Unlike their manual counterparts, electric tile cutters have more power, but at the same time require a constant power source. And although in appearance they are a little reminiscent of the familiar “grinder” and, just like it, they can easily cope with both ordinary tiles and porcelain stoneware, they have one distinctive feature– wet cutting function. When used, the coolant will prevent the disk from overheating. The connection is that, using a special hose, the electric tile cutter is connected to water tap through a special adapter.

Since you need to choose a tile cutter not for one day, but for a very long time, you should pay attention to such points as:

reliability and popularity of this model,
warranty repair period,
possibility of warranty repairs in your city,
availability of spare parts,
ease of replacing carbon brushes (by doing it yourself, you will save on calls to service centers).

Don't forget to check the availability of such additional functions, such as the possibility of inclined cutting of tiles and regulation of cutting depth.

Tile cutting machine

For large volumes of work and the constant need to cut tiles and porcelain stoneware instead electric cutter It is better to purchase a tile cutting machine.

Possessing high power, such a machine can easily handle not only facing or floor tiles, but also paving tiles. Unlike a conventional electric tile cutter, the machine has its own work table with an angular and parallel stops, which allow you to cut tiles with fairly high accuracy. If it is necessary to make inclined cuts, some models allow you to tilt the working surface to the required angle.

To cool the diamond blade, the design of the machine provides for the installation of a water bath (a small open container for water), so it does not need to be connected to a water supply network.

However, such a machine has a weight (just over 10 kilograms) that exceeds the weight of a simple tile cutter, which makes it less mobile, but safer to operate (subject to compliance with safety regulations ).

The machine should be operated only after it has been installed on a flat, non-slip surface, and under no circumstances should the protective cover be removed from it.

Element cladding building structures When repairing or constructing buildings, it involves a large amount of work with tile material. In this case, it becomes necessary to adjust the dimensions of the tiles when laying them on surfaces with a complex geometric configuration. To do this, the tiles are cut along the desired contour.

There are many tools and devices for solving this task, but the most effective are tile cutters specially designed for such work. These structurally simple tools provide high-quality separation tile material to give it the desired shape. Which one should you choose?

A tile cutter of this design has advanced capabilities

Choosing the type of tile cutter: electric or manual?

The tile cutter will be an indispensable assistant when large volume works on laying brooms, tiles and other tile materials. When using this tool, work is significantly faster, high-quality cuts are obtained, and material waste is minimal. There are a wide variety of models on the market similar devices, differing in size and cost, so for the right choice it is necessary to understand the nuances of their functioning.

Based on their design features, tile cutters are divided into two: large groups: electric motor driven and manual mechanical. In devices of the first type, a diamond-coated cutting disc is used for operation, driven into rotation by electric current energy. In the second case, the cutting element moves along the guide slide using muscle force.

Electric tile cutters are widely used in construction organizations, stone processing workshops, in the production of products on an industrial scale. Tool with mechanical manual drive Most often used when performing home repair work. Owners of private houses make it easier to lay tiles and metlakh tiles.

Replacement cutting roller for manual tile cutter

Ceramic tiles can also be sawed with a grinder or even cut with a glass cutter. By attaching a diamond-coated disc to a grinding machine, you can, of course, process the tile material by cutting, but only environment Clouds of fine dust, very harmful to the respiratory system, will be released. Such work is accompanied by terrifying noise.

The cutting roller of a glass cutter does not always cope well with dividing the tile material into fragments; when using it, a lot of waste is formed. It should be noted that this tool is not affected by dense slabs, which are laid on the floor of the kitchen hallway or corridor.

Manual tile cutter selection options

A manual tile cutter structurally consists of a cutting element on a movable base and a device for measuring angles. The cutter is the basis of the working part of this tool; with its help, a cutting line is drawn, when tapped, the tile is divided into fragments of the required size. If the cutter configuration is a circle, then it can make a circular cut.

The presence of a “ballerina” makes it possible to cut holes for socket boxes

Slight angle cuts can be made using a ruler on a rotating mechanism. In addition, well-known manufacturers of such tools provide their products with many additional functions that allow them to protect the edge of the cut slab from coloring, set cutting angles with increased accuracy, and so on.

Distinguish the following types manual tile cutters:

Using rotating rollers as a cutting mechanism. In their manufacture, especially strong metal alloys are used. Such tools have found the most widespread use.
Having a mechanical carriage in the cutting unit increased rigidity. With their help, you can carefully process thick and durable slabs.
Bearings used in the chassis design. Such tile cutters are indispensable when working with high-strength materials up to one and a half centimeters thick.

The required model is selected depending on the expected volume facing works. You don’t need to focus solely on the cost of the tool; you need to take into account its technical characteristics and functionality.

The presence of a manual stop with rotating mechanism allows you to cut tiles at an angle

The selection criteria are as follows:

The mechanism must have a very strong frame. This design element ensures long tool life, especially when permanent job with materials of increased hardness. Jamming in the system of handles and levers is unacceptable; they must move easily and effortlessly.
An important operational parameter is the cutting length of the tile material provided by the machine. This value can vary from ten to seventy-five centimeters. Machines with cutting lengths that are too short are often simply useless for getting the job done.
Good smooth movement of the cutting element along the surface of the plate being processed is achieved by installing a bearing in the running gear of the mechanism. Machines of this design are often used by professional tilers.

Electrical Tool Evaluation Criteria

Machines with cutting parts driven by an electric motor are used to perform a large volume of facing work. Their use can significantly reduce waste. The cutting surface is clean and smooth, increasing the speed of operations and labor productivity.

The most affordable portable electric tile cutter

For the proper functioning of these units, their design provides for water or air system cooling. It allows the tile material not to overheat, otherwise it may crack or split. Cooling water is located in a tank, from which it is directed, if necessary, to the surface to be treated. It is preferable to use this type of cooling system, as it is more efficient. Electric machines are available in stationary and mobile versions.

Portable tile cutters are much lighter and can be easily moved if needed to be used in another location, however functionality stationary units have much more.

They can be used for cutting slabs of considerable length, since dimensions similar devices allow this. In terms of price-quality ratio, machines with electric drives are the most the best option tool for cutting tile material. With their help you can perform a variety of work with high quality and speed. You should not look for a unit that is too cheap; saving is inappropriate here.
The simplest version of a desktop electric tile cutter

The quality of the assembly must be assessed by visual inspection of the unit. There should be no visible defects on its structural elements, and when the engine starts, vibration of the machine should be minimal. The smaller it is, the better the result of tile cutting will be.
An important operational parameter is the power of the electric motor. The larger it is, the better device will cope with increased loads during the work process, and the longer it will last. Good indicator The power value is considered to be eight hundred watts or more. The output shaft of such electric motors rotates at a speed of eleven thousand revolutions per minute.
Machines with bottom-mounted engines take up less usable space. Units with a motor located on top cut tiles more accurately.
The characteristics of the depth and length of cut of electric machines are good. The best specimens are capable of processing slabsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn
The availability of spare parts for repairs must also be taken into account. Details service You need to find out from specialists at repair shops.
The working disk should not differ in size from standard values. Most often, its diameter is eighteen centimeters.

The functionality of electric tile cutters significantly exceeds the parameters of manual machines. Professionals value this tool for its high speed of processing tile material. The cutting time is several tens of seconds.

Tile cutters of famous brands

Long service life and excellent performance qualities Tile cutters differ from the following well-known brands:

“Sigma” belongs to the professional class of tools for cutting tile material. The cutting part moves on bearings along tube-shaped slides, which ensures uniform force exerted on the cutting strip. The thickness limit for the processed tiles is two centimeters.
Tile cutter Sigma Series 3 Klick Klock 3D2K
The outstanding characteristic is minimum distance eight millimeters from the edge of the slab, at which you can begin work. Available Italian producers and is widely popular in the domestic construction market.
“RUBI” - an Italian model has been produced since the middle of the last century and during this time has gained a reputation as a tool with unconditional reliability and quality. Professional versions are equipped with an extremely durable casting frame, many adjustments and settings that allow you to very precisely select the angular direction and depth of cut.
Tile cutter RUBI TR-600-S
Depending on the thickness of the slab, the roller cutting elements of the tile cutter can be replaced. The length available for processing is seven and a half centimeters. The units are stored and transported in convenient plastic cases.
"VARYAG" - domestic production The device is distinguished by a design of reinforced strength. In the manufacture of the roller cutting element, tungsten alloys are used, so it has a truly unique hardness.
Tile cutter Varyag-55133
The unpleasant creaking sound is eliminated using titanium coating. Bearings are used in the design of the chassis; the carriage moves along one guide.
“Biber” - the legendary German quality of this brand is greatly spoiled by the release of counterfeit Chinese products. The original tile cutters of this brand will not disappoint professional tilers; they are distinguished by their long service life, simplicity and reliability of design. They effectively cut slabs of increased hardness from porcelain stoneware and are equipped with high-precision settings.

Tile cutter BIBER Supreme-55111
“DIAM” - machines of this brand are domestic, but their production is organized at Italian enterprises, so they are distinguished by their unconditional quality and reliability in operation. The units are professional equipment and are equipped with a powerful cast frame, roller cutting elements made of especially strong alloys, and precise measuring devices. It is possible to process tile material up to two centimeters thick and up to seven and a half centimeters long.

Electric tile cutter DIAM ML-1200/1.8

The choice of a tile cutter model for performing a specific type of facing work is determined by the characteristics of its operation. The high-speed electric tile cutter is used for professional use when laying a significant volume of tile material.

For home repairs carried out on your own, a machine with a manual mechanical drive is quite suitable. Which unit is better can be determined by conducting a comparative analysis of them technical characteristics. In this regard, it is useful to familiarize yourself with the experience of using several tools using the following video.

Materials such as ceramic tiles are widely popular in construction. This material has many advantages, but a significant drawback is the need to use special tools for cutting tiles. One of the effective construction tools For working with tiles, use a manual tile cutter. Before buying such a tool, you need to know the features of your choice.

The basis of the design of a manual tile cutter is the following elements:

Platform, base or bed.
A cutting roller equipped with a foot for breaking tiles.
Guide rail.
A handle that is combined with a roller.

A good manual tile cutter is usually made from high-quality steel. Not only the efficiency of the tool, but also its reliability and durability depends on the quality of the material.

The bed is the basis of the tool, so this element is made of solid stamped metal. To ensure the immobility of the tiles that are being cut, the platform is equipped with stiffening ribs and is also covered with rubber strips. The platform can be equipped with an additional ruler and protractor. The length of the tool base starts from 300 mm. This tile cutter is suitable for cutting ceramic tiles Not big size. There are products of longer lengths designed for larger building materials.

The cutting roller complete with the carriage moves along guides. The design of the carriage may vary, depending on the cost of the tool. The roller is made of high-strength steel, the quality of which may vary depending on the price of the tile cutter. Usually the rollers can be replaced when cutting part dulls.

Guides are often presented in the form of tubes. With their help, the carriage moves. The stability of the tool depends on the strength of the guides. The handle and cutter are connected into one unit, the movement of which is ensured by guides. Manual tile cutters are divided into three main types:

Roller. The cutting element is a roller.
Mechanical. Equipped with a rigid carriage with a handle.
Bearing. Used for cutting thick and durable ceramic tiles.

Characteristics of manual tile cutters

The operating principle of a tile cutter is similar to that of an ordinary glass cutter.

The tile cutter has a special diamond coating, which allows you to scratch the cutting line, after which the tile breaks easily. The frame allows you to securely fix ceramic tiles of different thicknesses. A cutting wheel or roller runs along the entire length of the bed. Depending on the size of the tile, the roller moves along the guides, thereby cutting the tile.

The advantages of manual tile cutters are due to the following factors:

Device mobility. The tool is quite compact, so it is not only easy to transport, but also to store.
Compactness.
Light weight. The weight of the tool depends on the length of the bed, but usually it does not exceed 2-3 kg.
Independence from electricity. The tool does not require a network connection, as it works manually.
Safety.

If you previously had to resort to using a grinder to cut tiles, which resulted in damage to the material, now you can purchase a manual tile cutter and forget about the problems.

We will learn more about how to select a manual tile cutter below.

What to look for when choosing

To purchase the best manual tile cutter, you need to pay attention to the following important factors:

Appearance. When choosing, you should pay attention to the base of the tool, which should be thick, rigid and durable. The ability to apply great force to cut the material and the accuracy of the cut depend on this.
Length working area. To avoid having to buy another tile cutter later, you should first decide on the size of the tile that you plan to cut. The optimal length of a manual tile cutter is 600 mm, but you can take more.
Handle length. The longer the handle, the less effort the master will have to apply to cut the tiles. This is especially true when you plan to work with porcelain tiles.
Smooth running of the carriage. The movement of the carriage along the guides should be smooth and there should be no jams or jams. If the tool has bearings, then this is good, but such a tile cutter will be many times more expensive than an analogue without them.
Cutting roller. The roller should not have any play, and it should also be possible to replace it. If the roller becomes dull, it can be replaced. If the tool does not have the ability to replace the roller, then after it is dulled, the entire unit will need to be disposed of.
The presence of a ballerina. It is a device that allows you to cut holes in tiles. You should purchase products with a ballerina only if such an option is necessary. The quality of ballerinas on tile cutters is low, so you should not count on long-term operation of this device.

How to choose a manual tile cutter? This question is asked by every craftsman who has to work with tiles. Experienced specialists know how to choose a good and reliable tile cutter. Which tile cutter is best to choose also depends on the manufacturer. Tile cutters from popular brands will cost more, but you can be sure of their quality and reliability. Popular models include the following instruments: RUBI, Sigma, Stayer, Matrix and others.

Manual tile cutters, although they are one of the most safe tools, but when working with it it is important to follow safety precautions. The presence of a cutting roller can lead to injury, but since the tool is manual, this probability is very low.

To prevent splinters from flying into your eyes when cutting tiles, you should wear special glasses. When working, use work gloves to prevent serious injury.

In conclusion, it should be noted that it is recommended to store the tool in places with low humidity to avoid corrosion. The tool is quite reliable and practical, which will always be a faithful assistant when working with tiles.

Today it is impossible to imagine construction various houses, dachas, saunas, office buildings or complexes of buildings without the use modern tiles, which is very important for finishing. There are many types of tiles, including marble or ceramic, porcelain tiles. Therefore it is useful to have on hand great tool- tile cutter. ABOUT best models We'll tell you in this article.

For the work of the tiler and tiler, a tile cutter is used, that is, special tool for cutting tiles, stone and glass. Cutting is carried out in many ways:

placing a mark, making an incision, and the material is already broken along it;
cutting and sawing;
biting off pieces from the edge.

Whatever the cladding is, everywhere it is necessary to make trimming to the required dimensions and straight cuts, as well as holes, recesses and figured cut, cutting 45 degrees. These special actions depend on the type of product. Not every tile cutter has all the functions, and it is advisable to take this into account when purchasing a structure.

There are three main types of device:

mechanical;
electric;
manual.

When using electric tile cutters, it is necessary to take into account that they do not tolerate humidity exceeding 70%. The product is placed only on a flat floor, and if it is a large-sized machine, then a separate room is allocated for work. Use glasses and special headphones, as abrasive dust collects in the air, and the noise level is up to 85 dB. It is better not to overload the mechanism. When thick tiles are cut and the material is fed too quickly, it is dangerous. There is a risk of engine overheating and the possibility of equipment splitting.

How to choose a product

To buy a mechanical tile cutter, it is smarter not to chase a low price in order to save money. The cost of goods varies from 300 to 2500 rubles. Cheap models under 1000 rubles are good only if they are rarely used for soft ceramic tiles. More expensive models costing 1000-2500 rubles are suitable for long-term use, as they can withstand enormous loads during operation.

Models up to 6,000 rubles are suitable for household use. The cheapest samples are suitable for frequent cutting of glass, porcelain stoneware or ceramics, but are not used for cutting stone. The device, up to 30,000 rubles, is professional; it is easy and convenient for it to perform precise cuts and work with hard materials. Ordinary cheap copies can be used in modern professional construction, for working with stone or concrete slabs with a thickness of more than 100 mm.

The cost depends on the brand. The most inexpensive models: Zubr and Caliber, Enkor, Energomash. World-famous companies DeWALT, Fubag, Bosch, Stayer produce more expensive devices. Manufacturers usually provide 1-2 year warranties on their equipment and also provide warranty repairs. When conducting repair work in the kitchen and bathroom, where the tiles are up to 15 mm thick, then use mechanical tool. If the material thickness reaches more than 30 mm, then an electrical structure will be required.

Product selection criteria

Before purchasing the product, pay attention to the dimensions. A small bed of 400x180 mm is suitable for cutting ordinary tiles. At the same time, the strength of the frame material is taken into account, durability depends on this.

For frequent work, a circular cutter, special built-in squares, rulers, and tile strengthening mechanisms are important. When processing durable thick ceramics or trimming, use an electric tile cutter.

The speed of rotation of the disk is of great importance, so protection from flying fragments of ceramics and enamel is required. Rotational speed idle move doesn't matter. Motor power is very important and should be 2 kW on average. Overall diameter cutting disc depends on the operating power of the product. The larger the disc, the thicker the material is cut. When installing a 350 mm blade, it easily cuts 135 mm material.

The main selection criteria: popularity of models, characteristics. Manufacturers and cost are taken into account.

Top rating of the best tile cutters

Mechanical devices

Nuova Battipav SUPER PRO 900

The modern and special Nuova-Battipav SUPER PRO 900 is an excellent tile cutter for diagonal, straight cutting of double or single fired ceramics. Excellent cuts stone-ceramic products. The carriage consists of nine ball bearings and is quickly and easily adjusted. This product cuts tiles on its own. The work table is equipped with springs to facilitate the breaking of cut tiles with a thickness of 5-19 mm. The cutting wheel is large with a diameter of 22 mm, there is a graduated special stop for straight cutting, and the tile itself will be easy to break at the cutting point.

Manufactured by an Italian company. Used for cutting material up to 900 mm long, as well as for diagonal cutting of 63x63 tiles. The cutting accuracy is perfect, the fracture is excellent, suitable for construction repair work. The dimensions of this design are traditional. The machine is excellent, professional.

Characteristics:

The product has a professional class, a manual type;
comes with a broach;
table dimensions 636x636 mm;
knife dimensions are 22x6.1x4.7 mm;
tilt angle up to 45 degrees;
there is no drilling device;
sliding bearing mechanism;
1 year warranty;
dimensions 1160x340x160 mm.

Video review of the device:

Advantages:

The quality of the model is excellent;
easily cuts 60x60 tiles;
there will definitely be no withdrawals;
weak chips;
convenient design;
assembly;
high cutting accuracy;
compactness;
ease of transportation.

Flaws:

overall performance is weak;
price
uncomfortable handle.

Bottom line: An excellent quality manual tile cutter has a working surface of 900 mm and easily copes with cutting tiles. The design is durable. average cost- 2000 rubles.

SIGMA TECNICA 2A3

Has a compact small size. The model is functional and durable. The cutting system is standard. The device allows you to cut various materials With large thickness. The pull-type cutting system makes it possible to process materials easily and quickly. It is distinguished by such qualities as accuracy, speed, and greater cutting clarity. The cutting length goes exactly to 51 cm, the cutting diagonal is 35 cm by 35 cm with a cutting depth of 20 mm.

The work table reduces cutting rigidity and also creates a shock-absorbing effect. When the tile is divided, the precision ruler is centered. Has a locking system at every angle. For speed of movement, it is attached to the platform along the rail of the product. The tool is compact and easy to use.

Characteristics:

the working table is 28 cm wide;
conventional system cutting;
cutting wheel 12 mm;
table with springs;
there is a 45 degree cut;
5 year warranty.

Advantages:

the ruler is located close to the tiler, and this is very convenient;
Thanks to ball bearings, the separator slides easily;
the table is spring-loaded, which is effective in separating material;
you can also buy rollers for cutting glass, enameled and glazed tiles and mosaics;
cuts thick materials.

Flaws:

price;
the handle is not the most comfortable;
there are chips.

Result: A modern tile cutter cuts very thick materials. Convenient line available. The table is excellent. The average price is 14,500 rubles.

It is a modern, excellent tile cutter. It runs on bearings and has a long service life. The width of the bed is 180 mm. Used for cutting various tiles up to 16 mm thick. The stop bar easily rotates up to 90 degrees, and there is a spare cutting element. The length of the cutter is 500 mm and the diameter is 22 mm. A special top feed of the cutter and disk is used when cutting ceramic floor tiles. The bed is equipped with reinforced stiffening ribs made of special steel.

Characteristics:

manual type design;
Mechanics;
manufacturer China;
transverse cut at 45 and 90 degrees;
there is an element for adjustment;
used by experienced builders.

Advantages:

effective tile cutter;
hand-held convenient device;
used for various ceramic tiles;
one year warranty;
cuts great.

Flaws:

roller operating angle.

Summary: Favorit is used for cutting ceramic tiles. The average price is 30,000 rubles. When purchasing a tile cutter, consider the reputability of the company.

Electrical devices

Husqvarna TS 66 R

Feel free to call it a professional product. There is a special and convenient pump. The working standard saw moves clearly along the rail, the cut is easily controlled. The only drawback is the lack of a ruler, which is installed independently. Expensive mechanism. An ideal tool for experienced builders. Long service life. The cut is easily adjustable, cutting tool maneuvers. Powerful motor performance.

The cutting depth is standard and equal to 40 mm. Varies in workmanship. According to numerous reviews, the cut is accurate, and the error is 0.3 mm. The electric work table is wide and cuts tiles easily different sizes. The special type disc has a diameter of 200 mm. The design is simple, the cutting head allows cutting various materials. The stroke length is wonderful and the kit is ordinary.

Characteristics:

source of work - network;
cut at 90 degrees;
protection class IP 54;
minimum sound pressure level;
noise level is 63 dB;
frequency 50 Hz.

Video review of the tile cutter:

Advantages:

technical properties are ideal;
the feeding system is convenient;
there is water collection;
adjustable carriage;
cool machine;
ease of use;
understands quickly.

Flaws:

the table quickly rusts;
Expensive.

Result: The dimensions of the product are large, the cutting accuracy is excellent. Used for stone, tiles, porcelain tiles and marble, as well as cutting bricks. The average price is 30,000 rubles.

Fubag MasterLine 6 Star 660

Electric machine for cutting stone and tiles, performs angular and straight cuts, as well as combined cuts, thanks to the cooling system it works for a long time. Supplied special system cooling, which extends the life of the machine. The table is large and handles large stones.

For work it is better to use a cutting depth of up to 30 mm. The frame has 8 stiffeners. A water tray is available. The tool provides cutting time. Equipped with a fan to cool the working engine. It works intensively and is distinguished by the accuracy and quality of the cut. The design is easy to disassemble, convenient to store and transport. Maximum length cutting – 660 mm.

Characteristics:

cutting depth 50 mm;
way up;
rpm 2800;
cutting angle 90...45;
0.8 kW motor;
operates from a 220 V network;
compact sizes;
weight 30 kg;
material - ceramics and stone;
disc diameter 200 mm;
angular cut, precise.

Video review of the tool:

Advantages:

clear apparatus;
quality assembly;
saving time due to the quality of the cut;
body parts are connected securely;
The carriage travel is tight and precise;
the disk is easy to lower and rises comfortably;
works great.

Flaws:

the location of the tap is strange, that is, above the engine;
flexible wiring is not ideal;
if the maximum cut is made, it is convex and not clear;
there is no fixation for the tiles;
original disc of low quality;
sometimes the disc beats.

Bottom line: The electric machine makes angular and straight cuts, the cutting accuracy is significant, and thanks to the cooling system the machine works for a long time. The average price is 30,000 rubles.

Used for wet cutting of concrete, stone, porcelain and brick, ceramics. Provides a variety of cutting: straight, diagonal, and also with a slope. Working cutting accuracy is maximum. The console system will provide a processing width of up to 610 mm and requires special grounding. The design has a special water collector at the back, moves with the table and catches the water that comes with large tiles with a diagonal cut.

The cutting disc is installed with minimum diameter 150 mm. Disc dimensions reach 254 mm. Available for cutting at angles of 22.5, 45, 90 degrees. For easy fast During transportation, the dismantled parts should be placed in a special bathroom, and for easy cleaning of the structure there is a removable cutting trolley.

The machine is used in living conditions, for modern workshops, granite workshops. Features a more powerful motor, large disk, powered by three-phase current. For safety, it is equipped with a stop button with a lock.

Characteristics:

power 1600 W;
speed 4200 per minute;
acoustic power 103 dB;
standard equipment;
cutting depth up to 95 mm;
Made in the USA, assembled in Taiwan;
one year warranty

More details about the tool in the video:

Advantages:

different tiles

the cleanliness of cutting even fragile materials is excellent;
there are oblique cuts, rosettes, gutters;
the assembly is excellent;
the model lasts a long time;
no rusting;
cutting depth 95 mm.

Flaws:

the saddle is not made level;
the engine may roar loudly during startup and operation;
it costs expensive;
The original disc can be easily erased;
difficulties with the format.

Result: The machine serves for wet special cutting of materials, provides a variety of work. The average price is 60,000 rubles.

The Forte TC 250 cutting design is suitable for mobile stationary work, as it is small in size and convenient. It has a range of capabilities, an excellent tool, and the cutting depth here is greater than that of other products. There is a durable motor with copper winding, which is required for increased service life and greater functionality; the cut will be accurate in tiles and stones.

The product is excellent and cuts a variety of materials. Suitable for a specialized workshop. The stroke length is 1.02 meters. The machine is compatible with discs up to 25 cm. Equipped with a powerful motor. Cuts almost all types of tiles. There is a water supply for work.

Characteristics:

power 1200 W;
product type: electric;
large table;
sold in a special cardboard box;
cutting depth - 50 mm.

Review of the tool - in the video:

Advantages:

quality product;
cuts ceramics and marble;
price;
Excellent cuts and makes holes;
high number of revolutions;
cooling.

Flaws:

If you press the disk very sharply against the tile, it slows down;
table without rubber.

Result: Easily and quickly processes the material, suitable for all types of tiles. The average price is 15,000-16,000 rubles.

The machine is powerful. The stone cutter is used for universal application, copes with the processing of artificial and mineral material. For each invoice - special disk which is covered with steel protective casing. Cuts many products from stone to concrete up to 1000 mm long. The table has a unique design with a frame. The modification has a 220 V electric motor.

Characteristics:

product type diamond work;
tabletop design;
cutting depth up to 110 mm;
permissible cutting angle, 45-90 degrees;
weight 108 kg;
front-feed disk;
power 2.2 kW.

Advantages:

functional;
handles well;
excellent cutting depth;
speed 2800;
quality of cut.

Flaws:

The engine should be even more powerful;
overpriced;
processing is slow.

Bottom line: Excellent for all types of material from ceramics and concrete to stone with a length of 1000 mm. The design of the table is ideal, the rigidity is high, and there is cutting with a processing angle. The average price is 130,000 rubles.

Sakuma TS180S3 is electric stationary machine, which consumes 800 W power. Dry conventional cutting available. It is powered via a 230 V network. Manufacturer: Sakuma, China. The diameter of the diamond blade is 180 mm. The table is comfortable. Product warranty - 1 year.

The machine is used for general cutting of modern medium and small format tiles for walls and floors. Galvanized work table.

Characteristics:

cooling;
table with minimal dimensions;
speed 2950;
45 degree corner cutting;
corner stop.

Today there are many tile cutters from different manufacturers. To choose suitable model, let's look at the differences between them.

Purpose of the tool

First, let's figure out what a tile cutter is and what its purpose is. As is already clear from the name of the tool, it is designed for cutting tiles. With its help, you can easily reduce the tile to the required fragment. Replaces a glass cutter or grinder.

There are two types:

manual – cutting element, goes along guides;
electric - a diamond disc powered by a motor.

In the question - which tile cutter is better, it is difficult to find a definite answer, since each model has its own area of application. If no specific work is expected, you can get by with a simple manual model, but when you have to cut durable ceramic floor tiles in large volumes, it is still better to give preference to electrical equipment.

A simple option suitable for home work

You can do without a tile cutter, replacing it with improvised tools. But the following facts speak in favor of his choice:

processes a large number of tiles in a short time;
the cut is obtained without chipping;
copes with durable materials, such as porcelain stoneware, stone and floor tiles more than a centimeter thick;
makes cuts at an angle.

Thus, you increase productivity while spending less effort and energy. In addition, the percentage of defects is reduced, which leads to savings in facing material.

Manual tile cutter

Choosing this tile cutter is advisable if large-scale repairs are not expected in the near future. Using such a device, you can process both simple tiles and those with increased strength.

The following types are distinguished:

mechanical;
roller;
bearing

The models differ in their operating principle. Basically, these devices have a platform with a groove in the middle and a cutting unit, which is represented by guide rails, a presser foot, a carriage with a handle and a cutter. This part of the design is where the differences lie.

Mechanical is a standard model with a push handle, which allows you to securely fix the tiles and obtain an accurate cut. In other models, such a device may also be present. In a roller tool, the cutting element is a carbide roller. And the third type tops the rating of manual models - the bearing type, its movement is smooth and accurate due to the use of two bearings with bushings that fix the cutting element in the guides.

Roller tool is easy to use

How to choose the right manual tile cutter? Pay attention to its type and structure. The smoothness of the ride must be checked. Do not forget that metal parts are also prone to wear, and therefore the quality of the materials used matters.

It differs significantly from manual models. First of all, evaluate the structure and principle of operation. IN in this case The tile cutter is based on the use of a motor. The dimensions of such a device are superior to hand-held miniature models. The choice of electric tile cutters is influenced by the motor power. Note that manufacturers place it both above and below relative to the working platform. In the first case, precise cuts are obtained, in the second, the tool becomes compact.

Which of these two is better is determined by characteristics such as the quality of parts and additional options. A good quality tool comes with diamond blade For wet cutting, since electric models are equipped with a water supply, which cools the cutting element and reduces the amount of dust. Look for a tile cutter with a splash and splinter protection cap.

Model with motor designed for working with durable materials

Before you finally choose an electric model, check its ability to perform work at an angle of 45 degrees. Such tools must provide sufficient depth and length of the cut. The first indicator is at least 3-4 cm, the second – within 50 cm. The thicker and stronger the tile you plan to work with, the more powerful the tile cutter’s motor should be.

Purchase personal protective equipment to protect your respiratory system and eyes from tile particles when working with it.

What to pay attention to

List of criteria that you should focus on when purchasing a tile cutter:

Brand – trust trusted companies with a developed service network.
Materials used – it must be either strong metal, or a diamond element, this is especially important for bushings on manual models, since if they wear out, the tile cutter becomes unusable.
Quality of fastenings - a flimsy design will lead to rapid failure and threaten your safety.
Low defect rate - ideally there should be no defects or their percentage tends to zero.
Engine power – when working with porcelain stoneware, weak models are not applicable.
Permissible load - determines the thickness of the tile. You should not overload the tool, as you will simply speed up its breakdown.
Spare parts – the presence of replaceable parts allows you to avoid premature contact with the service center and additional costs for the purchase of worn-out parts.
Cutting at an angle is a necessary option, as it makes it possible to accurately adjust the tiles.

Depending on the choice of a particular model, pay attention to specific quality indicators. The tool comes with a warranty.