In houses old building, nostalgically called Khrushchev-era apartments, there is a window between the bathroom and the kitchen. Apartment owners compete in wits, making guesses about the purpose of this small window. But this does not make the problem any less - the window not only looks strange modern interior, but also takes up part of the usable wall area, interfering with the placement of cabinets and shelves on both sides. What to do with this “porthole”: seal it up or turn it into a design detail?
The easiest way to get rid of a window is if you plan to decorate the walls with plastic panels or level them with plasterboard. With this finishing you won’t even need to fill in the opening – it will be reliably hidden from view finishing materials, and nothing will remind you of the old design.
Plastic panels will help you quickly get rid of outdated windows
Brick or foam blocks
Tired window from the bathroom to the kitchen in brick wall It’s easy to lay it with bricks or cheaper and lighter foam blocks. This method is ideal in cases where it is planned to hang heavy cabinets in place of the opening - a strong wall will withstand any load. First of all, you will need to dismantle the glass and frame, removing all wooden elements from the opening. Before laying the brick, the walls must be leveled with thick cement mortar and allowed to set. Bricks are laid on cement mortar, and special adhesives can be used for foam blocks. The remaining gaps are filled with fine scrap and rubbed down on both sides with cement. After filling the opening with building materials, the wall is plastered, leveled and covered with finishing.
Brick laying is a major option for eliminating the window between the bathroom and kitchen.
Moisture-resistant plasterboard
If you just need to improve appearance walls, and furniture fastenings will not end up in the place of the window, it can simply be sealed moisture-resistant plasterboard. To do this, a frame made of metal profiles and then screwed to the frame plasterboard sheets. To prevent noise from the bathroom from disturbing the silence in the kitchen, it is recommended to fill the void with mineral wool.
Work begins with the complete dismantling of the window frame
Cement mortar
Another method of closing the opening tightly is to seal it with cement mortar. For this method, you do not have to dismantle the frame - you just need to remove the trim and glass. A chipboard frame is attached to the remaining frame, and a plaster mesh. Experienced craftsmen recommend making a thicker cement mortar than usual and adding a little gypsum for quick setting. The solution is applied using the method of “throwing” small portions; to obtain the result, at least 5-6 stages will be required. Dried layer cement mortar level with a grater, then cover with a solution diluted with water, and again treat the area with a grater. The result is a perfectly smooth surface that remains hidden under the finishing material.
Practical niche on the bathroom side
To make the most of every centimeter of usable space in your bathroom, you can turn an unattractive window into a beautiful and functional niche. To do this, the window opening is sealed with plasterboard from the kitchen side, and in the bathroom the recess is leveled with cement mortar and covered with the same tiles as the entire room. If you don’t like a small niche, nothing prevents you from dismantling part of the wall and enlarging the opening, which will create a spacious niche with shelves. Look nice oval shapes, which can be easily created using drywall.
Practical shelf or decorative niche- you decide.
For beauty and comfort, it is recommended to supplement the niche with lighting, and to expand the space, the back wall of the recess can be lined mirror tiles or tiles with a 3D pattern. If desired new part It’s easy to turn the interior into a cabinet, adding glass doors or curtains-blinds.
Modernizing the window from the kitchen to the bathroom: new life for a boring opening
For those who do not want to part with the window opening, considering it an indispensable source of light in the bathroom, there are many options for transforming a Soviet-era window into a modern designer window that decorates the interior. The easiest way is to replace plain glass with stained glass; it will fill the bathroom with colored highlights and create a rainbow mood. The old trim will also have to be dismantled and beautiful polyurethane baguettes installed instead.
A bright highlight for a good mood
Instead of stained glass, glass blocks can be used to seal the window opening; working with them is no different from brickwork, and the design of both rooms will only benefit. If possible, it is recommended to widen the window opening a little, for example, to make a spectacular window from glass blocks along the entire length of the wall.
Modern glass blocks do not spoil the interior and fit into any design
By enlarging the window opening, you can beautifully beat up a boring window
If the window from the kitchen to the bathroom does not bother anyone, then you can leave it in its original place, replacing it with a modern one plastic double glazing suitable color. It is recommended to make the window opening - this will ensure additional ventilation and protects against mold and mildew in the bathroom.
A plastic window does not spoil the modern interior at all
If you can’t seal the window between the bathroom and the kitchen on your own, then this problem should be entrusted to specialists. In a matter of hours they will erase an unattractive opening from the face of the wall or give it a gift new life in the form of a niche or a modern window. In some things, the main thing is the result, and it is better to shift the boring process onto the shoulders of others.
Repair in small apartments“Soviet era”, popularly called “Khrushchevka”, has a number of its own nuances and features. Moreover, they are associated not only with the small size of the premises, but also with the “architectural delights” of that time. One of them is the window between the bathroom and the kitchen - an element inherent in all “Khrushchev” buildings. In theory, it was supposed to help save energy by allowing you to use the bathroom without turning on the lights. In practice, the light coming through the small window was not enough, but the already small " effective area» the walls in both the bathroom and kitchen were significantly reduced. Therefore, almost everyone who had to make repairs in a Khrushchev-era building was faced with the question: “How to seal the window between the bathroom and the kitchen?” Considering that Khrushchev buildings have been repaired for more than half a century, the “people's ingenuity” has found many solutions to this problem, the most popular of which we will introduce you to.
Removing the window “automatically”
Let's start with the least labor-intensive option, in which no additional work will have to be carried out to “seal the window”. We are talking about a situation where the walls in both the bathroom and kitchen are finished with materials such as plasterboard or, say, plastic panels. In this case, the window is removed “automatically”, since both materials will reliably hide it. The most you have to do is dismantle window frame at both sides. However, given the tiny size of the “Khrushchev” bathroom and kitchen, this option is quite rare, since both panels and drywall “steal” a little space, which is already sorely lacking.
Please note that nothing heavy (for example, a wall cabinet) can be attached to either drywall or plastic panels in the window area. The maximum that can be hung on them is a small mirror or a light wall lamp.
If the above-mentioned materials are used only in one of the rooms (for example, the kitchen is covered with plasterboard), the window can also not be sealed, but turned into an additional niche shelf. To do this, you just need to dismantle the window frame from the side of the bathtub, and plaster the entire internal area of the niche with cement mortar or starting putty. After this, all that remains is to finish it with the same material as the rest of the walls, for example, tiles. For “greater beauty,” you can visually increase the space of a niche by installing a mirror on its back wall, provide the niche with decorative lighting, or even turn it into a mini-cabinet by attaching one or two light doors to it.
Having considered the “lazy” options for sealing the window between the kitchen and the bathroom, we move on to more complex, full-fledged options for solving this problem.
Seal the window with cement mortar
One of the most common options for sealing a window between the kitchen and bathroom is using cement mortar. To prepare it you will need cement grade M-500 or M-400, sand and water. Considering that relatively little cement is needed to prepare the solution (no more than 6-7 kilograms), it will be enough to purchase a small package, or use leftover cement from other repair work.
In addition to the mortar, you will need a shield to hold the plaster on (one cut to fit the window is perfect for this purpose). chipboard sheet) and metal painting mesh.
The work of sealing a window with mortar consists of three stages.
Removing an old window
First of all, of course, it is necessary to dismantle the old window. First, take out the glass. This must be done carefully so as not to damage your fingers.. After this, using a nail puller or a large screwdriver, carefully remove the trim from both sides. As for the window frame, whether to remove it or not will have to be decided on a case-by-case basis. The fact is that interior walls in the “Khrushchev” buildings they were made “I don’t understand from what,” so when you remove the frame, you risk taking out a piece of the wall along with it (this is especially true in cases where the wall between the kitchen and the bathroom is quite thin). Therefore, we recommend that you leave the frame in place, especially since attaching the protective screen and plaster mesh to it will be much easier.
It is advisable to clean the remaining frame from paint residues and treat it with water-repellent mastic or primer.
Installation of sheathing
Before installing a chipboard panel into a window opening, it is necessary to attach a plaster mesh to it on both sides, which will help the solution to better “grip” to the surface of the panel. This can be done using small nails or self-tapping screws. When the mesh is secured, we proceed to install the shield in the window opening. The easiest way to secure it is with narrow glazing beads nailed to the remaining window frame.
“Filling” the opening with mortar
Mix the cement mortar with sand in a standard ratio of 1 to 3.
To make the solution set faster, you can add a little gypsum or alabaster to it.
When the solution is ready, we begin to apply it to the plaster mesh using a trowel. Please note that the solution must be applied thin layers, since a thick layer of raw mortar has an almost 100% chance of falling off the sheathing, so all the work will have to start all over again. And only after the next layer has dried can the next one be applied. Thus, on each side you will have to apply at least 4-5 layers of solution.
After the final layer is almost dry, you can begin to level it. For this, it is best to use a painting mesh. It can be mounted either on a special handle-holder or simply wrapped around a suitable piece of wood.
In order to get perfect smooth surface, after the “rough” leveling with the mesh has been done, it is recommended to spray very liquid solution and once again level the surface using the finest mesh or just a coarse rag.
After the solution has completely dried, you should have a completely smooth surface, practically indistinguishable from a regular plastered wall. Now you can put it on it tiles or wallpaper.
Covering a window with plasterboard (video)
Another option to remove the window between the kitchen and bathroom is to cover it with plasterboard. Detailed technology you can find out by watching the following video:
Please note that heavy wall cabinets cannot be hung on drywall.
We fill the opening with bricks
The most “major” way to seal the window between the bathroom and the kitchen is brickwork.
As in the previous case, work begins with dismantling the old window. Moreover, it is necessary to remove not only the platbands, but also the window frame and all embedded elements. As mentioned above, the walls in Khrushchev buildings are extremely unreliable and can collapse, so you need to dismantle the window frame very carefully. If, however, the edges of the opening have “woke up” in some places, they need to be restored. To do this, you can use thick cement mortar.
When the opening is ready, you can proceed directly to laying bricks. The same cement-based solution is used as a binding element.
If the thickness of the walls between the bathroom and the kitchen is narrower than the width of the brick, the bricks should be placed “on edge”.
When laying a window opening, minor problems may arise with the top row of bricks. If the remaining distance does not allow the use of a whole brick, it’s okay - the gap can be filled with small “bricks”, which are subsequently held together with plaster.
The final stage of work is plastering. The solution for it can be prepared in the same way as described in the previous section, or you can buy ready-made gypsum plaster, with which you can get a smoother wall surface.
Decorating the window
All of the methods described above allow you to close the window between the bathroom and the kitchen, as they say, “tightly.” But what if you want to keep this additional light source? To do this, the window needs to be “ennobled” or, in other words, decorated.
The simplest (but also the most expensive) option would be to order a plastic window of the required size. If you equip it with a tilt-and-turn mechanism, you can turn the window not only into an additional source of light, but also provide good ventilation of the bathroom, given its small size, a fairly pressing issue.
You can also use it to decorate a window. stained glass or, as a more “budget” option, stained glass film. Both methods allow you to make the window opaque, thereby ensuring privacy in the bathroom. In addition, the colored light entering the room through stained glass can become the “highlight” of your bathroom design.
As you can see, there are many ways to get rid of an unnecessary window between the bathroom and kitchen. Moreover, almost all of them are not as complex as they might seem at first glance. So if you decide to remove this “Soviet-era element” from your apartment, we are sure that you will be able to do a great job without resorting to outside help. Good luck with your renovation!
The interior of a bathroom depends not only on internal filling plumbing and furniture, but also from architectural solutions building. The presence of a window in the room allows you to create a new look and increase the comfort of using the bathroom. It is advisable to provide windows at the design stage, but you can make an opening in a finished house.
In this article we will give advice on performing special construction work. What are the advantages of a room with a window?
- Daylight. All modern developments lighting fixtures in their own way technical specifications only to one degree or another they approach sunlight. As a result, the eyes get tired quickly, color shades exterior finishing the walls are distorted. In addition, the constant increase in energy costs forces homeowners to take all measures to effectively save energy. A window in the bathroom is a reliable, safest and free source of light.
- Favorable microclimate indicators. The window allows you to ventilate the room, the air becomes much cleaner. In addition, accelerated ventilation allows you to quickly remove excess moisture.
- Visual increase in area. Due to the original design solutions the bathroom takes on a prestigious look.
- Aesthetic pleasure. At the time of adoption water procedures there is an opportunity to relax, admire the scenery, and get closer to nature.
Modern window systems allow to reduce to a minimum heat losses, the window almost does not lower the temperature in the room. There is no need to worry that you will have to spend money because of it. additional funds for space heating.
The most common is the traditional rectangular window. But quite often you can find very original exclusive solutions.
| Window type | Short description |
|---|---|
| Allows you to remove the artificial barrier between the room and nature, it can have sliding doors with access to the terrace. Provides maximum efficiency natural lighting. | |
| Characterized by various geometric shapes, used for baths placed in attic rooms. Through the use of various light filters, it can completely change the interior of the bathroom. | |
| Most often multiple windows are used small sizes. High placement protects the owners from unwanted prying glances. | |
| Undeservedly forgotten technology filling window openings. Glass blocks transmit sunlight perfectly, but the rays are refracted to such an extent that it is impossible to distinguish internal objects from the street. Another advantage of such windows is their excellent heat saving performance. | |
| Stained glass windows can be either traditional (an expensive option) or painted ( cheap option). Instead of stained glass, frosted and colored double-glazed windows with or without patterns can be inserted into window frames. |
stained glass film
If the window faces the street or is accessible to prying eyes, then to increase comfort you need to solve issues with its decor. Designers offer several decoration options that allow you to simultaneously maximize the amount of natural light and limit visibility internal space. In this case, the existing filling of the room is taken into account.
What can you use to close and decorate a window?
- Blinds. Available in plastic, metal or natural materials. Electric drive with remote control remote control or mechanical manual.
- . The main advantage is that in the raised position the window plane is completely freed. Made from various materials, the sizes can be easily selected for each window.
- . Traditional way decoration, transmits light well and at the same time hides the interior space.
- Heavy curtains. It is recommended to close windows dark time days under artificial light.
Allowed to use combined agents window protection, specific solution taken into account the design style of the room.
What you need to know before making a window opening
According to existing regulatory documents reduce on your own physical characteristics Load-bearing walls are strictly prohibited.
How to determine the purpose of a wall in the architecture of a building?
Load-bearing walls are the frame of the structure and absorb all vertical loads of the elements located above, including rafter system roofs. During the calculations of such walls, possible loads are taken as the initial data; after complex calculations, the thickness is selected taking into account the construction material. To increase operational safety, a multiplying factor is included in the final parameters of load-bearing walls. It is the presence of such a coefficient that allows, in some cases, to make openings not provided for by the project, but in the future they will be mandatory should intensify. Any redevelopment of load-bearing walls can be carried out only after obtaining permission from the BTI.
Most correct method determination of load-bearing walls - familiarize yourself with the floor plan of the house, it indicates the location of the floor slabs. In old panel Khrushchev buildings the façade walls and one of the internal partitions. Pay attention to which walls the ends of the floor slabs rest on. Sometimes this is quite difficult and can only be done with attic spaces. On one load-bearing wall There may be several floor slabs, the gaps between them are sealed, which complicates external inspection.
The general rule is thickness load-bearing structures cannot be less than thirty centimeters, the material of manufacture is solid brick or durable concrete. By measuring the thickness of the partitions, you can determine which of them is load-bearing.
IN monolithic houses it is much more difficult to find out the location of load-bearing walls; in some projects they are completely absent, and loads are carried by concrete columns. The thickness of prefabricated block load-bearing panels is at least 20 cm, interior partitions much thinner. In addition, they are made without reinforcement and can be made of plasterboard, gypsum block or other fragile building materials.
Important. Often invisible walls are located in load-bearing walls. engineering Communication. Do not damage them while making the opening.
You should not take risks and start work without familiarizing yourself with the building design. Do not trust craftsmen who are ready to make a hole in any wall without studying its purpose and the features of the building.
How to make a hole in a load-bearing wall
Let us remind you once again that work can only begin with the permission of BTI employees.
Step 1. Make markings on the wall taking into account the size of the window. The opening around the entire perimeter should be 2–3 cm larger than the size of the window frame. The markings are done using a level, and the corners are checked to ensure that.
Practical advice. Experienced builders Before marking, find the upper and lower masonry seams and make every effort to ensure that at least one cutting line coincides with them. This makes the job much easier.
Step 2. Check the functionality of the tool. The perimeter of the window opening needs to be cut off with a grinder with a diamond blade.
If it is possible to use professional tool- Great. This cutter has a water-cooled disk, which greatly simplifies the cutting process and reduces the amount of dust. If such a tool is not available, then measures should be taken to prevent dust from contaminating adjacent rooms. In addition, you need to work in a respirator.
And one more important point. Coordinate working hours with your neighbors; sawing is a very noisy process.
Step 3. Vertical cuts are made first. Hold the instrument correctly, always with both hands. Another important point is that the disk must rotate towards itself, and not vice versa. If you do not follow the direction of rotation, the angle grinder will jump out of the wall with great force, and this is fraught with very serious injuries.
Cut slowly all the way through diamond blade, try not to deviate from the line. If a deviation is detected, it is prohibited to correct it by turning the disk. You need to remove the grinder from the slot, return the tool to a flat area and start cutting again.
Step 4. After the vertical cutting is completed, the horizontal cutting can begin. It's much more complex and difficult. If the window opening is high, then you need to prepare a comfortable, strong and stable platform. It is recommended to make several rows of vertical and horizontal cutting, dividing the continuous opening into small areas. Due to this technology, the process of removing pieces of the wall is simplified.
Practical advice. If you do not have a tool capable of cutting through the entire thickness of the wall at once, you will additionally have to use a hammer drill.
After cutting along the perimeter of the contour, the material is gradually removed with a hammer drill. As it accumulates, remove construction debris; it interferes with work and can cause injury.
How to work with a hammer drill correctly?
- Be sure to use personal protective equipment.
- Do not press too hard on the tool. The impact force does not change, but the wear of the device mechanisms increases. The impact depends on the speed of the chisel and its mass, the mechanism turns kinetic energy into shock mechanical.
- Do not operate the hammer drill without load. The fact is that in this case the entire force of the impact is forced to be absorbed by internal mechanisms, which causes their premature destruction.
- If planned long work with hard surfaces, it is recommended to change the lubricant to a thicker one. The chisel shank is lubricated every 10–15 minutes.
- Do not cover the ventilation holes on the hammer drill body with your hands. Clean them in a timely manner and prevent dust from entering the device. If the case gets hot, give it time to cool down. The mechanism will cool down faster if you switch it to drilling mode and turn it on Idling. The ventilation system will effectively remove excess thermal energy.
Do the planned ones technical care tool, and it will serve you for many years. Provided that the hammer drill is made by well-known companies, and not in a Chinese basement. Remember that according to current legislation, you cannot work with a hammer drill from 23:00 to 7:00. Neighbors have every right to sue if the “law of silence” is violated. But in each region, local authorities can adjust the quiet time based on local conditions.
If you find metal rods, change the direction of the blow, do not allow the chisel to come into contact with the reinforcing belt. After cleaning the concrete, the rods are cut using a grinder with a metal disc.
Step 5. Carefully align the planes of the opening along the lines, remove all excess protrusions. As for the holes, they can be repaired without any problems during the installation of a window in the bathroom.
Strengthening the window opening
Very important stage for load-bearing walls, strengthening the opening should be done immediately after cutting the window. Prepare material and tools. You can reinforce the opening with any rolled metal of the appropriate size, but it is best to do this using a channel with a shelf width equal to the thickness of the wall.
If there is no such assortment, then it is allowed to use corners; they should be installed on both sides of the wall and connected to each other with metal jumpers.
Step 1. Take the dimensions of the opening and cut off the metal blanks.
Important. Horizontal lintels must rest on vertical supports. Not adjacent, but lying, you mean it.
Cut the pieces to size. The length of the two vertical posts must be absolutely the same, the same requirement applies to the jumpers. The cut ends should be located at an angle of 90° to the side surfaces.
Step 2. Clean the rolled steel from dirt and rust and treat the surface with an anti-corrosion coating.
Important. Metal conducts heat much better than bathroom wall materials. This means that metal structures will create a cold bridge around the perimeter of the window. For liquidation negative consequences Additional measures should be taken to prevent the appearance of condensation on the metal surface. We will tell you what to do for this below.
Step 3. Paste vertical racks and horizontal lintels into the window opening, secure them temporarily with supports. Using a level, carefully check their position; control the angles with a construction square. Do not forget that the dimensions should be 2-3 cm larger than the window frame. If necessary, you need to correct the contour of the opening.
Step 4. Using electric welding, connect the individual metal elements into a single structure.
Step 5. After the metal has hardened, remove the slag and cover clean surfaces anti-corrosion coatings.
At this point, the process of making a window opening in the load-bearing wall of the bathroom is completed, and you can begin installing the structure.
Video - Opening in a load-bearing wall. Cutting concrete and strengthening the window opening
GOST requirements for installation work
For example, we will consider the installation of metal plastic window- the most common option.
The bathroom has a specific microclimate, this should be taken into account when installing the window.
- Holes for fasteners should be spaced evenly around the mullions. The diameter of the holes depends on the size of the mount. The length of the recess for anchors in concrete and solid brick must be at least 40 mm, in hollow brick and 60 mm blocks.
- Along the perimeter of the frame with inside PSUL tape is glued, it provides additional sealing of the window. Cold air will not penetrate between the frame and the wall. This is very important for bathrooms, due to high humidity The dew point here is low. Moreover, as we already mentioned, metal structure, used to strengthen the made window opening, becomes a cold bridge that should be protected from the entry of moist air. If the distance between the bottom of the frame and the opening is more than 40 mm, then diffusion tape with the same properties is used for insulation.
- The opening must be cleared of construction waste and dust, if necessary, some sections of the wall are strengthened.
- To improve adhesion, the walls of the opening are moistened with water. This stage of installation of plastic windows is skipped by most teams; for them, the main thing is speed, not quality. The dry surface of the opening perimeter does not allow polyurethane foam attach firmly.
- The bottom of the box should not rest on the opening; there are special plastic wedges for this. Elements are placed at the corners and imposts of the structure; to align the position, use building level. The check is done at the site of the removed glazing bead. This is done due to the fact that the rebated part of the frame may be uneven; this is allowed by the production technology of metal-plastic windows.
- The holes in the opening are drilled to a level; the planes must be strictly vertical. Otherwise, the window sashes will close or open spontaneously. The anchors are driven all the way in only when the melting position of the frame has been checked and all elements have been secured.
- Before installing the drip tide, a diffusion tape is installed. The gap between it and the opening is carefully foamed. The ebb is fixed to the supply profile with small self-tapping screws. And, unfortunately, not everyone does this operation. professional builders. Remember that in bathrooms, reliable insulation is very important. To reduce noise during rain, polyurethane foam is applied at low tide.
Installation of panels
- Adjustment of fittings is done after installation is completed.
Don't forget to remove protective film from the surface of frames and sashes. If you leave it on a long period time, then under the influence sun rays The coating is firmly welded to the plastic and is very difficult to remove.
Common myths about plastic windows
- You cannot drill holes in the frame, as this will cause condensation. This is completely untrue; the manufacturers themselves specially drill holes to drain condensate and rainwater that gets through loose connections.
- The windows have special openings for circular air circulation through the chambers of the frame. Due to this, it is constantly heated, the surface is dry, condensation does not appear, and heat losses are reduced. These myths contradict the elementary laws of physics and are spread by unscrupulous advertising agencies.
- Fixation is done using metal mounting plates. They are screwed to the frame with self-tapping screws, and to the wall with dowels. This cannot be done, thin plates are not able to withstand wind and mechanical loads and are deformed. The window frame must be fixed to the window opening only with anchors or dowels (direct fastening to the wall). A hole is made in the frame, and a recess is drilled in the wall.
The frame rests on plastic wedges
Video – Bathrooms with windows
Not all bathrooms have windows, and in most old-type apartments there is no bathroom at all. outer wall. But if you are the happy owner of a private or country house, then most likely your bathroom has a window. A plastic window to the bathroom is perfect option, since plastic is not afraid of moisture and temperature changes, and, therefore, will not rot due to water that gets on it. Let's look at what kind of windows there are in bathrooms.
If the bathroom is small, then there is no need to place a huge window here; a small window of 50x50 cm, placed high under the ceiling, will be enough, which will contribute to an even distribution of light. But if your bathroom has a substantial size and a wide wall, then you can install a large panoramic window, which will not only add daylight this room, but will also decorate the interior.
Large plastic windows in the bathroom
Since the bathroom is an area that we would not like to be exposed to public view, especially when we take a shower, then by installing more windows In this room, privacy must be taken care of. For this case, both stained glass plastic windows for the bathroom and opaque or smoky structures, which with their cloudy glass will protect from prying eyes, are suitable. The fourth option for protecting a bathroom window is roller blinds made of special waterproof fabric.
Stained glass window in the bathroom
The advantage of a window with stained glass is its aesthetic appearance and good protection from prying eyes. The disadvantage is that it is impossible to see what is happening on the street on the other side of the window. Therefore, for those who like to enjoy the view from the window, this option is not suitable. Another thing is an opaque window.
This is the most popular type of glass for windows in modern bathrooms. The advantage of opaque glass is that nothing is visible from the street, but from inside the room you can see the view from the window. This is especially convenient for those who like to look at the night sky or admire the view of flickering night lights while taking a bath.
Smoked windows
These windows are similar to the previous version, but only differ in that it is not possible to observe what is happening outside the window, since these glasses are tinted on both sides. Smoky plastic windows in the bathroom are popular as small blind windows.
Roller blinds and blinds for the bathroom
The most simple option protecting the bathroom window is installing waterproof roller blinds(better with closed system). It's simple, compact and beautiful. Various options fabrics, colors and textures will allow you to find the perfect curtain option for the bathroom. Blinds that harmonize with the interior of the room will also look good in the bathroom.
If you have not yet replaced the windows in your bathroom, or do not know how to close it from prying eyes, it’s time to take care of it. Modern technologies and special equipment allows us to produce windows of any shape and size: round, arched, polygonal, wide, narrow, large, and so on. Therefore, you have the opportunity not only to install new plastic window to the bathroom, but also complement the interior of this room with bright sunlight or decorate it with stained glass.
Our company offers you to install new windows in the bathroom and decorate them with modern fabric blinds (roller blinds). With this design, you can calmly take a shower, without worrying that someone will see you from the outside, and without worrying about moisture that may settle on the window and it will begin to rot. PVC windows are not afraid of moisture, temperature fluctuations, are not susceptible to rotting or fungi - so this is an ideal option for your bathroom!