After caring for the garden, a summer resident, as a rule, is left with a lot of waste: from thin twigs to massive logs. They can be used for firewood, but it is much better to make them garden crafts made of wood with your own hands, which will decorate your site and attract everyone's attention.
Landscape design elements
Garden buildings
Wood can serve as a material for construction and decoration various structures: barn, well, gazebo, kebab house and so on. Such wooden crafts for the garden with your own hands look especially attractive against the background country house from logs or planed timber, forming uniform style landscape design plot.
It should be remembered here that the construction of even a very small structure will require a fairly large amount of wood. Therefore, you need to be prepared for the fact that the missing amount of lumber will have to be purchased. However, the result is worth it.
By organically combining rounded logs and branches obtained after pruning trees in the garden, you can create unique and inimitable exteriors.
garden path
Paths paved with tree cuts will help make your summer cottage beautiful and unusual. Cuttings of thick branches and sawn tree trunks that remain after cleaning the garden are perfect for this. You just need to make sure that they are not damaged by pests, as this affects the strength and durability of the coating.
The work is done like this:
- the tree must be cut into pieces of equal length (diameter does not matter here);
- process workpieces special composition protecting them from rotting;
- According to pre-made markings, dig a trench, the depth of which is equal to the length of the prepared cylinders plus 15-20 cm;
- pour a sand cushion at the bottom of the recess, which is then thoroughly compacted;
- Only after this can the saw cuts be installed.
The gaps between large elements can be filled with thin blanks that you sawed from tree branches.
After finishing the work, the remaining gaps are filled with sand or earth. The latter can be mixed with seeds, after germination of which the path will acquire an even more attractive appearance.
Fences and supporting walls
Wood is also perfect for constructing various fences. In addition to the main purpose - zoning a site or restricting access to people and animals - wooden picket fence or wattle fence also perform decorative function, complementing or emphasizing various design solutions in landscape design. Such a fence can be easily made from scrap materials without spending money on their purchase.
Zoning of a site can also be done using supporting walls made from dry tree branches or logs suitable thickness. This solution will be effectively combined with a house made of timber, paths made from sawn logs, wooden garden furniture and so on. It is only important not to overdo it and maintain a sense of proportion.
Decorative bridges
The ensemble of wood crafts can be completed by bridges made of logs and branches, thrown over streams or artificial reservoirs. They look very colorful and are often used by designers to decorate landscapes of summer cottages.
They have one drawback - the need to use large quantity material. It is unlikely that you will have a sufficient number of logs and thick branches at your dacha. However, in this case, the nearest forest can help out. Surely there is a sufficient amount of dead wood there that can be put to good use.
Note!
Before cutting down trees in the forest, you must make sure that by these actions you do not violate the existing regulations relating to the use of natural resources.
Decor elements
Flower bed
After cutting down an old or dried tree, you are left with a massive trunk, which is most often sawn into firewood and burned in a fireplace or sauna. However, with a little imagination, you can turn it into a unique and attractive clubhouse that will decorate your yard, barbecue area or outdoor summer kitchen.
To make it you will need:
- old tree trunk;
- chisel and hammer;
- chainsaw;
- plane or sander.
You are unlikely to need manufacturing instructions. You just need to arm yourself with patience and imagination, and then give the unsightly piece of wood any desired shape. Also, do not forget about the depression, which must subsequently be filled with soil and flowers planted there.
Advice!
When choosing plants, make sure that they match each other in shape, color and flowering time.
This way you will achieve the best effect and get rid of dead wood in the flowerbed.
garden furniture
Widespread in Lately We received DIY garden crafts made from wood that act as furniture. The price of such products made by professional craftsmen, is quite high, but you can make a simple chair, table or armchair yourself.
You just need to take into account the following nuances:
- To make furniture, it is necessary to use wood with a thick cross-section, which is difficult to find locally. summer cottage .
- During the manufacturing process we use professional tools and equipment. If you don’t have them, you can rent the necessary power tools at your nearest hardware store.
Wood processing and furniture manufacturing are carried out in the following sequence:
- a log or branches of suitable thickness and length are processed with an ax to remove remaining bark and knots;
- using a chainsaw, objects are given their final shape and size;
- after fastening the parts to each other, they are finalized with a hammer and chisel;
- at the very end, all surfaces should be cleaned sandpaper, achieving perfect smoothness.
Advice!
In order for the resulting garden furniture to serve for a long time, it must be treated with an antiseptic, getting rid of pests inside the wood, and coated with varnish that protects the product from negative external factors (sun, water, and so on).
Decoration of the playground
Wood can be used to make various figures that decorate playgrounds. They will serve not only as a design element, but also as a game item. For example, a wooden horse. Making it will not require much effort from you.
The work is carried out in the following sequence:
- First, the torso is constructed. To do this you need to take two log cuts large diameter and connect them using small planks. The thickness of the cut should be about 3-4 centimeters, and the diameter should be at least 25 centimeters. In this way, a box is formed, which, if desired, can later be filled with soil in which to plant flowers.
- The next step will be making the legs. To prevent the horse from falling during games, they must be durable and hold the body steady. Wooden will do timber with a cross section of at least 5-6 cm or tree branches of a similar diameter. It is advisable to select the length based on the height of the children.
Remember that the legs must be firmly attached to the body and set in the ground. Can be used metal corners for rigidity, and bury the lower ends of the beams in the ground. - The final stage is decorative details. This includes the head, mane and tail. The last one is the easiest to do. You just need to secure a few pieces of rope. The head is made of plywood, which is given the desired shape using a jigsaw. You can attach the head to the body using wooden block 30-40 cm long.
- Don't forget about painting the figure. This will not only give it an attractive appearance, but also protect the wood from negative impact sun, rain and snow. Remember that you must use wood varnish or paint that is safe for children and does not emit harmful substances into the atmosphere.
Another way to make a horse out of wood is to use scraps of branches and logs left over from clearing the garden. But in this case, it is necessary to show remarkable imagination, constructing some kind of sculpture from them.
You can also make a children's swing and sandbox from wood. With a little imagination, you can design climbing ladders, labyrinths and many other objects that the younger generation loves so much.
Note!
All items installed on the playground must be safe.
Make sure that the base of the swings and stairs is carefully concreted, that all parts are securely connected to each other, and that there are no nails, splinters, knots, etc. on the surface of the wood. various defects which can injure the baby.
By the way, the old logs at your disposal can be successfully used to make cars, trains, and so on. All you need is a chainsaw and some paint. And the delight that will be reflected on the faces of your offspring will serve as your best reward.
Conclusion
It is hardly possible to give an exhaustive list of garden crafts that can be made from wood. By showing your imagination, you can come up with many more ideas, each of which is worthy of implementation. After watching the video in this article, you will learn a lot more interesting things.
Nothing can decorate your home better than crafts made with your own hands using materials of natural origin. Only they are able to charge a home with positive emotions and make it truly unique. Both children and adults can create crafts from wood.
To make beautiful and original crafts, you don’t need to master complex wood carving techniques; you just need to select wood, buy a suitable tool and set aside a small amount of time for implementation. creative ideas, which can be found on the Internet.
Using wood whose structure is uniform or with beautiful design on the back, you can build a lot of things. For example, if you use a circular saw to cut logs into small circles and then polish them, you can make several coasters for hot dishes.
To do this, you will need to glue the cuts close to each other on the matting, turn the product over and do the same gluing on the reverse side. Taking advantage of a beautiful cut of a log, some craftsmen make watches by attaching to the reverse side a mechanism that was previously on electronic watch and drilling a recess in the center for the arrows. Using a igniter, they draw a dial or stick several wooden sticks on the places where the numbers should be.
Home decorations
You can make many useful things for your home from wood. They are suitable for both apartments and cottages. And they are not difficult to make.
Wood crafts are added to home interior some mystery, such as hand-made lamps. The originality of the lampshade, made of steel wire and wooden planks, creates an atmosphere of comfort and harmony in the room.
In order to do beautiful product, you will need to cut the planks into rectangles and drill a hole in each, then you just need to assemble the blanks using wire, stringing them onto it. In this case, it is better to assemble based on the width of the quadrangles, placing those that are wider in the middle. Next, the structure is bent and fastened with the rest to form a globe. To make the item more extravagant, you should make two balls, one of which will be slightly smaller than the other. Place the smaller globe into the larger one and insert the socket inside, screw the light bulb into it.
Original hanger
You can make unique crafts from tree knots with your own hands if you show a little imagination and ingenuity. For example, look at a couple of sections of trunks that have branches. Nail them using regular nails to the wall surface. Place a board on top of the structure to create a shelf. If you screw a branch with knots to it, you will get a wonderful hanger.
Cutting boards
Do not throw away construction debris wooden material, for example, crafts made from boards can become beautiful decoration every kitchen. We are, of course, talking about cutting boards, which are used by every housewife in her kitchen.
This piece of kitchen utensils will be an excellent gift for a friend or relative. Any woman will be glad to receive such a wooden product as a gift, since it is original and can always come in handy. In production cutting board in the following way:
The result will be beautiful board, which can later be painted or a pattern burned on it using an electric burner. After applying the design, the main side of the board should be varnished.
Crafts for the whole family
It is very useful to involve children in creativity. If you teach a child to do with his own hands something that will be useful to him in Everyday life, then you can show him how important it is to love and respect work.
Toys for children
Many people think what can be made from wood. Yes, anything. Even fun game, which will undoubtedly captivate everyone, since it will be done with your own hands and will have a rather original look. This will be fun during the summer pastime at the dacha. It's easy to create a product:
- Cut the branches into circles, the diameter of which will be about 1 cm. You will need 12 of them.
- Using sandpaper, sand the parts.
- Prepare a circle from a wide cut of a log on which to burn cells, approximately 3 by 3 cm.
- We burn out zeros on the prepared 6 circles, and crosses on the remaining ones.
With such simple steps you can get an original game that both adults and children have long loved to play. Therefore, do not throw away the leftover wooden material, but use ideas for creating various crafts.
A vase for flowers
There is a product that even a schoolchild can make. We are talking about a vase in which you can put a bouquet of fresh flowers. It is made from tree cuts and metal cans. In order to end up with something like this unique gift, some steps need to be done:
- With the help of adults, stock up on small-sized wooden cuts.
- Take a metal jar and clean it from dust and dirt.
- Using glue, glue the cuts onto the base starting from the bottom, while avoiding the formation of gaps. When cracks form, mask them with circles of smaller diameter.
At this point, all work is considered completed. You can coat the vase with varnish to get shine. This craft will be a unique gift for mom on her birthday or on March 8th. And the bouquet will look original in a vase made of natural wood.
Unique stool
This unique wooden product can simply become a decoration for every country house or garden. In order to make it, little effort and time will be spent, but the result will be a unique stool. To create it you will need:
These types of crafts are distinguished by their uniqueness and originality, and to create them you do not need to master any specific craftsmanship skills. By taking a little time and showing a little imagination, you can get a beautiful wooden product.
Don’t forget that children love to participate in any process, so be sure to involve them in creating new masterpieces, rest assured, they will appreciate it. You can find crafts that they can do on their own, don’t interfere child development and encourage their imagination in every possible way.
Apartment interior or courtyard. With the help of wood you can make any fantasy come true.
Features of working with wood
Wood is unique material, which is distinguished by its special structure, naturalness, beautiful appearance, sufficient strength, and amazing flexibility in processing. It is drilled, sanded and fastened. Various wood species are successfully used as ornamental materials:
- Products of the woodworking industry - timber, lath, pressed panels, veneer.
- Parts of a tree - trunk, branches, roots, branches.
- Available materials - driftwood, stumps, logs, bark.
Crafts (especially homemade furniture) can be made from new, purchased wood. In this case, you should remember the need to pre-dry the material. Most often, free raw materials are used. High-quality wooden elements can be extracted from old, unnecessary furniture. A huge reserve is located in the forest. You just need to walk around it and pick up dry wood. There is no need to rush to dispose of the dried ones - trees and shrubs can give wonderful results.
You can make a wooden craft different ways. The following main types are distinguished:
- Joinery. They are made in a workshop, on a workbench, or by hand. The following manual (including electric) is used carpentry tool: hacksaw and saw, plane, jigsaw, chisel, knife, axe, hand router, grinder, drill, hammer.
- Machine products. Woodworking machines are used to create complex wooden elements. Round profile parts and others perfect shape are obtained by processing on lathe. Complex recesses can be made using a milling machine.
- Exclusive products. Most crafts fall into this category if they have a non-standard design and are made from non-standard materials. wood material with your own hands . They are made by hand, piece by piece. Basic techniques - cutting, sawing, gouging, planing.
- Separately, we can highlight such an option as artistic crafts. The main technique is .
To make the craft attractive appearance carried out finishing or finishing. Wood has a beautiful natural structure, which just needs to be emphasized and secured. Final processing includes the following techniques: sanding and polishing wood, varnishing, tinting impregnation. As used , painting, dyeing, veneering, film coating.
Simple crafts
Crafts for beginners are simple, which allows you to involve even small children in the work.
Several options can be offered.
"Puppet show"
His “artists” are made from branches with a diameter of 4-7 cm. They must be selected with branches that can act as hands. Armed sharp knife, you need to remove the bark in the right places, cut off excess branches, and form a neck with cuts. Next, the face and elements of clothing are drawn. from buttons. If desired, clothes or scraps of fabric are glued on. You can make grass, straw.
Photo frame
The basis is dense the right size. The frame itself can be made from branches in different ways:
- Thin branches are glued in parallel in 3-5 rows along the perimeter of the base. They can be varnished or painted, and painting each branch in its own color looks original.
- Thicker branches (diameter 1-3 cm) can be used to edge the cardboard in one row. The ends of the branches are cut at an angle of 45 degrees and tightly joined to form a right angle.
- Joining branches with the remainder. In the corners the branches overlap each other in the form of a cross. At the junction, a cutout is formed with a knife for a tight joint. Gusset can be secured with braid or ribbon to form a bow on top.
Hanger
First, a frame (box) is made - a rectangular frame made of slats 2-3 cm wide, and a plywood bottom at the bottom. Inside this box, branches with twigs are placed vertically so that the twig can act as a hanger. Between such branches 2-3 smooth branches are fixed. All these elements are glued to the plywood. For reliability, they can be fixed with a rail installed with front side under the branches.
Of course, the list possible options crafts for beginners is not limited to the examples given. Depending on the purpose, other wood raw materials can be used. You can try your hand at using standard elements.
Crafts for Teens
With age, children develop imagination, certain skills and perseverance. It is typical for a middle school student (grades 6-7) to want to create an original craft with his own hands, and one that can be used to decorate his room. The following ideas can be suggested as crafts for boys made of wood:
- Organizer. An original and quite convenient stationery can be cut from a piece of board 20-25 mm thick. The photo shows a dog organizer that will decorate a teenager's desk
- Shelves. They are always needed in a child's room. The decorative effect is achieved through the back wall, on which the shelves themselves are fixed on brackets or corners. Such walls can be made of plywood or thin boards. Required form cut out using a jigsaw. Another option is to form a shelf frame of an unusual design. The photo shows a shelf arrangement from the “New Year’s Crafts” category. In this case, shelves made of 15-20 mm boards are edged with a Christmas tree-shaped strip
- Burning out. If you have a burning device, almost any teenager can handle this technology. Real paintings can be created on plywood by first drawing it with a pencil. Burning on a cut from a tree trunk looks beautiful.
During adolescence, it is especially important to develop aesthetic perception. When walking through a park or forest, you should look closely at snags and dry branches. With the help of a knife you can create a real work of art from them. It is important to see a certain image. If you shade it with stain and, then a craft made from roots and driftwood will decorate any interior.
Tree cuts
If you cut disks 3-5 cm thick from a tree trunk, they can become an excellent ornamental material. They are made decorative by annual rings that form a beautiful structure. Different trees have different shades where the crosscut is made, which allows for more creativity.
There are some options for crafts made from wood cuts:
- Crafts for the kitchen. The figure shows examples of kitchen crafts. From wood slices you get beautiful and durable stands for dishes (including hot ones), as well as boards for cutting food. The craft can be made from one cut of a large-diameter frame or assembled from several elements, connecting at the side
- Basis for painting, painting. A flat and even cut is comfortable material to apply a paint layer on it. You can draw a small miniature of a certain plot on it. The birch cut looks beautiful, because... the white and black bark provides an unusual edging.
- Frame. You can simply stick a photo on a thin one. A more labor-intensive, but attractive option is to form a frame from a series of cuts with a diameter of 3-4 cm.
- Flat figures. From wooden blanks you can collect stylized animals or fairy-tale heroes. Round form Easily transforms into a pig's face. On a large saw cut, it is enough to attach a “patch” from a cut of a smaller diameter and a couple of branch cuts instead of eyes. A little more work and you'll get Winnie the Pooh. Cheburashka is also easy to make.
Possibility of use at the summer cottage wooden cuts are expanding. Flooring made from such elements looks beautiful and is easy to use. You can use saw cuts to lay out a path and even a small area.
Crafts according to drawings
Some furniture elements can be safely considered handicrafts, since they complement the decor and give it originality. When creating them you will have to deal with drawings , which you need to develop yourself or borrow from specialists. We can highlight some original ideas in this direction:
- Coffee table or tea table. A peculiar design is shown in the figure. Its attractiveness is ensured by the slats attached to the sides. The bottom should be weighted for stability. The tabletop is made of thick, impact-resistant glass, but you can use plywood, plastic or chipboard
- A crib in the country, which can also be used by adults as original rocking chair. It is shown in the photo. It is easy to lull a baby to sleep in this crib
- Nightstand for a children's room. It is made in the shape of a Star Wars robot from wood and coated with silver. It is advisable to install a dome on top (for example, made of foam). The craft is shown in the photo
A great variety of furniture crafts have been developed. You can recall such options as benches and benches for the garden, hangers for hallways, chairs and stools for country furniture, various cabinets, chests, racks, etc.
Fun crafts
Particular attention should be paid to wooden crafts that lift the spirits of children and adults.
They are distinguished by bright colors, unusual shape and resemblance to comic characters. Examples of ideas include:
- Figures made from logs. How can you not smile when looking at the cheerful hares with your grandfather? Birch logs with their diversity create a special atmosphere
- Children's compositions. With the help of wooden crafts you can bring sincere joy to children. The picture shows a “Jolly Engine”, which can be easily made from a tree trunk by cutting it into cylindrical logs
The general atmosphere of cheerfulness is provided by various brightly colored figures of animals and fairy-tale characters. If they are combined with beautiful flower beds and lawns, then success is guaranteed.
Bear image
Classic character for decoration suburban areas The bear has long been considered to be a real symbol of Russia.
Crafts on this topic can be made using different techniques:
- If you have wood sculpture skills, you can carve a typical bear image. Such a figure looks beautiful when it is at least 1 m high. It is very difficult to find a monolithic wooden block of this size, and therefore the parts (torso, head, paws) are cut separately. On last stage they are joined with glue, the seam is puttied, and the entire statue is painted (brown, brown, black or white)
- "Standing Bear" A vertically positioned figure of a bear can be cut down and sawed from a tree trunk. The photo shows step by step process making crafts.
In a suburban area you can “breed” different bears. The mother bear and her cubs look great. You can use a plot from Shishkin’s painting and combine the bear cubs with trees and stumps
Wood crafts are very popular in the field of interior decoration and landscape design. They can be small souvenirs or tower in the countryside, attracting the eye from afar. Wood is a malleable material that allows you to create various crafts, but they must be done carefully, combining natural texture and external decoration possibilities.
It is better to make wooden crafts with your own hands according to the drawing.
Most work is relaxation and benefit in one, because original crafts It's not that hard to do in a few hours.
How to work with the material
We may find it useful in our work:
- Jigsaw;
- Cutter or knife with a sharp blade;
- Burner;
- Sandpaper;
- Paint and varnish compositions;
- Glue.
For a simple craft, for example, a candlestick or a box, it is best to use soft wood. This is linden or aspen, and if you don’t have the necessary bars (boards) at hand, then plywood or a pine rough board will do.
Important requirements for wood: the material must be dried. It is advisable to choose those parts where there are no cracks, chips or knots.
Candlesticks are usually processed on lathes. All the boys in school age We enjoyed doing this exciting activity, showing our imagination.
Ideas for beginners
So, let's start with the original, already presented candlestick ideas. And the easiest way to make these crafts is from plywood up to 5 mm thick:
The plan details the number of parts of the structure. And such a drawing can be used as a stencil.
It would be more correct to work like this:
- We transfer everything to a plywood sheet or scraps necessary details in one copy. This is more convenient, because displaying 5-6 identical glasses is tedious.
- Where you need to select the middle, we drill several holes. The easiest way to cut through them is with a hand or electric jigsaw.
- Next, the cut parts need to be sanded along all contours, and it is advisable to go over the finish with a fine-grained cloth.
- And at the end, even before assembly, apply several layers of simple oak stain. It is important to process all planes so that there are no light spots of plywood left.
- We collect, light candles and rejoice. Everything will take a couple of hours, no more.
But with boxes everything is much more interesting, here you can already develop skills and really create real masterpieces:
But before work, it’s better to watch the wizard’s video:
Where the developments and tricks are described in detail. It is very useful to learn some points for gluing, convenient for further processing of the material.
We work according to the usual plan:
- We draw out all the planes of the box according to the proposed drawing, or we simply use scraps or remnants of boards, again without cracks, knots or distortions.
- Craftsmen who have created dozens of carved boxes recommend gluing all surfaces tightly (and even the lid), if there are carvings on the lid or sides. Why is this? Nothing fancy, it’s more convenient to handle not a flat board, but a strong box, rotating the workpiece as convenient.
- On the assembled and glued parts of the box, be sure to mark the planned patterns, holes or legs with a pencil.
- Next, each plane is carefully processed with a wood cutter. But never, even for one-time work, buy Chinese blade attachments. These tools at work will ruin your nerves and discourage any desire for creativity.
- After processing the outer part, you can carefully cut off the glued cover. And then place it on hinges or homemade fasteners.
- The inside of the boxes is usually decorated with pieces of velvet.
- And finally, you can glue something more original onto the lid itself. For example, if this is a craft for a child, then even a forgotten Kinder Surprise toy will do.
- Wood is always protected from scratches and drying out with varnish, and homemade boxes are no exception. But a thick layer will definitely cause smudges. Therefore, we dilute the varnish with a solvent and a small brush, slowly protect it and at the same time decorate it from all sides.
It is important to know: Such high-quality products are not a waste of time, because ordinary, not yet processed blanks are sold as decoupage.
And this is a job for experienced craftsmen - a do-it-yourself table made from boards, unprocessed branches or logs. There is room for imagination to unfold here, and there is plenty of material even in the cities. You can take dry poplar, hazel, rowan. Even a crooked wild apple tree or a wide layer from a very thick pine trunk will do. Everything at hand can be processed, collected and decorated.
For this design, it is better to select a part of the rhizome from deciduous tree, but anything will do for a tabletop. It is important to be able to put together such a puzzle. The work will require tension bands, and you won’t be able to do it without a power tool (plane or jointer).
Finished work, performed by a home carpenter:
Already unnecessary, but intact industrial pallets will be very convenient for work. It is in them that best wood, already dried. The board will be without large knots, and it will be a pleasure to work with. Tips before you start:
- We calculate required amount units of material and collect it with a reserve.
- We measure the dimensions of such a table according to the place of use and the number of users.
- It is not advisable to use hardened screws or nails as fasteners. It is better to take threaded types.
- It is better to assemble the structure of a table and two benches into one, as shown above. This way, homemade outdoor furniture will remain safe and sound.
When working with wood, process all planes of the boards. It is better to spend more time on preparations than to remove random small splinters from your palms.
Nowadays, doing such things means not only working with your hands, but also showing your imagination. Collective work in this regard will only be beneficial.
About others simple crafts made of wood, watch the following video: