Has your child succumbed to the popular fashion for spinning spinners? Is he asking for a red one, a yellow one, and also a luminous one in the form of a minion? In general, so that it’s not like everyone else? Then you can make a toy with your own hands. Moreover, such a labor lesson will keep both you and your baby busy. And if you still don’t know what a spinner is, there we answered all the popular questions about this modern, arch-modern fun.
We have put together three ways for you to make a spinner, two easy and one more difficult (you'll need your dad's help here). But we are sure that both tools and materials should be found at home or in the country. Each instruction is supported by a video tutorial found on YouTube for clarity. So, how to make a spinner out of paper, from plastic caps and made of wood?
Method 1. Spinner made of paper and cardboard.
Simple, cheap and not at all ugly - a paper spinner for beginner spinner makers. An older child can handle it on his own, a little one may need a little help, and the result can be proudly taken to kindergarten or school - where creativity is always held in high esteem.
What you will need:
- Cardboard, marker and caps (or ready-made template from the Internet)
- Scissors
- Nail scissors or awl
- 3 coins
- Pen refill
- Paints or glitter for decoration
Instructions:
- Download a ready-made spinner template from the Internet. Or draw it yourself by tracing the lids from plastic bottle on cardboard. You need to cut two pieces of cardboard in the shape of a spinner.
- Cut out four more smaller circles. You can circle a coin of a lower denomination.
- Glue three coins of the appropriate size on the sides of one of the cardboard blanks.
- Glue the other half on top of the blank with coins.
- Using nail scissors or an awl, make a hole in the center of the spinner.
- Cut about 1 centimeter off the shaft from the handle.
- Punch holes in the center of two small circles.
- You can paint the finished spinner blank in any colors or decorate it with sparkles, rhinestones or stickers with your child’s favorite characters. Everything is your choice and completely unique!
- Insert a piece of dowel into one of the small circles and glue it around the edges of the hole.
- Insert the circle with the rod into the center of the spinner and glue the second circle on the other side.
- Glue the two remaining small circles on top of the ends of the rod. Ready! A spinner made of cardboard, without a bearing and with complete imagination in terms of design is sure to keep a child occupied for some time.
Source: PLASTILIN
Method 2. Spinner made of plastic caps.
This spinner will require a little more materials and diligence, but will also last an order of magnitude longer. In general, a spinner made from Coca-Cola caps is something like crafts made from matchboxes for older generations. Dear consumables and soul-warming results with minimal costs for an actively functioning (that is, rotating) thing.
What you will need:
- Plastic bottle caps
- Kinetic sand or plasticine
- Glue gun
- Nail and lighter
- Glue stick
- Scissors
- Toothpick
Instructions:
- Place three bottle caps almost to the top kinetic sand or plasticine. The main thing is to make the blades heavier.
- Use a glue gun to fill the remaining space in the lids to the top.
- Make a hole in the fourth (without sand) lid (you can use a heated nail).
- Glue three lids with sand to the central lid with a hole.
- Cut two pieces about 1 centimeter from the glue stick.
- Break a toothpick in half. Place a piece of rod on one end (the toothpick should not stick out) and thread it into the center of the spinner.
- Place the second piece of the rod over the tip of the toothpick on the other side. Ready! If you are very eager, such a spinner can also be decorated creatively - painted with paints (for example, acrylic) or pasted over with something positive. Or you can leave it as is by selecting interesting combinations caps from bottled drinks.
Source: Feature of the Day
Method 3. Wooden spinner (with bearing)
Let's move on to the most labor-intensive method of making a spinner. You can’t do without parents here, but the result can be safely laid out on the desk along with purchased toys. Again, in terms of design, freedom for self-expression is provided. For those dads and children who are friends with a jigsaw, know how to find bearings on the shelves of hardware stores and know which side to hold the drill on.
What you will need:
- 2mm bearing
- Plywood sheet (5 mm)
- Stack of coins
- Scissors
- Pencil
- Hand jigsaw
- Sandpaper
- Template (or cardboard and marker to create it)
- Clamp
- Drill
Instructions:
- Glue the template onto a sheet of plywood and mark the locations for future holes in each of the circles.
- Drill holes in each of the three circles on the sides to make it easier to cut them out later.
- Insert a jigsaw into the holes and cut them out.
- Cut out the workpiece itself from a sheet of plywood and sand it with sandpaper.
- You can paint the spinner any color you like.
- Insert the bearing into the central circle; if it does not fit well, you can drive it in with a hammer.
- Glue together a stack of coins for the inner circles. Start with a five-ruble coin (put it under the circle), then two-ruble coins and on top again a coin with a face value of five rubles.
- Do this for all circles. You can decorate it on top as you wish. Ready! Just think about the benefits of a homemade anti-stress toy: you had a good time together with your child, worked hard and saved money on buying another plastic trinket. And it spins great!
We have prepared for you interesting master class. If you are a fan of weaving balloons or strands of beads, this idea will definitely come in handy: with the help of a bead spinner you can quickly cast required quantity beads on a string.
We will tell you how to make a spinner yourself. Try a homemade spinner before buying an expensive one mechanical device. You will appreciate the ease of use.
Material for production
To create a spinner for stringing beads, you can easily find the material you will need:
- round lid with a flat bottom and high sides (at least 2.5 cm) or a plastic cup from yogurt, sour cream;
- regular ballpoint pen without refill;
- scissors;
- candle or lighter;
- ruler.
Having prepared required material, we can start assembling the bead spinner.
Process of creation
It’s great if you use a lid to create a bead spinner, this will reduce the creation time, because it’s already the right size, the required height, flat, with smooth edges. And if you took a jar as the material, then you will need a little time.
Take your plastic cup and use a ruler to measure 2.7 cm from the bottom. Make marks on several sides and connect them together. Optimal height 2.5 cm, but take a couple of millimeters in reserve, because we will singe the edges of the cup.
Take scissors, it is better to use small manicure scissors with sharp tips. Cut the bottom of the cup exactly along the line.
To prevent the part from clinging either during the process of creating a spinner for beads, or during subsequent work with the product, light a candle and scorch the edges of the cut part. You can use a lighter, but a candle is more convenient for this step; it does not need to be held by the flint or button.
The rod with which our spinner will spin will be the handle. Take the ink out of the pen. Turn the bottom of the cup over and mark the center on it. At this point you need to cut out a circle in which the shirt of your pen will fit tightly.
The handle should fit tightly, there should be no gaps so that beads do not fall there. When inserting the handle, unscrew the head. Insert the handle into the cut-out hole and secure with the head by screwing it in from the reverse side.
If it seems to you that the handle is loose, use hot glue and glue the handle to the bottom on both sides.
Check how your spinner spins; it should work like a spinning top.
Here's how to make a bead spinner, quickly and easily from the most available materials. But how to use it?
Principle of use
To use a bead spinner, fill it with enough small beads. There should be a lot of them, but not to the brim - 2/3 of the container. A large number of beads can scatter, and small beads are difficult to collect. If you don't have much of it, it's better to make several spinners different sizes. For example, from a wide sour cream cup and a small plastic one for drinks. This way you can always quickly collect beads, they will not fly apart or scatter across the huge bottom.
Take a fishing line or wire, attach the end to the beads with your left hand, and twist the spinner by the handle with your right hand. Hold the wire at a slight angle. Rotate the spinning top gently and slowly, so the beads will be carefully strung on the wire and will not scatter into the corners of the room. All you have to do is twist the rod and periodically move the chain of beads further.
In just a few minutes you will have a long garland of beads.
Advantages
A bead spinner has a number of significant advantages, for example:
- simplicity - the spinner works simply, the simple mechanism does not require effort;
- saving time - a chain of beads is assembled very quickly, tens of times faster than if you put one bead on the wire;
- convenience - you don't have to bend your back over the table while casting, you don't have to strain your eyes and you don't need good lighting to quickly and easily cast on a long row of beads.
This is such a wonderful master class, we hope you find it useful. This simple device can be created in a few minutes and greatly simplifies the process of setting beads on fishing line, thread or wire.
Craftswomen with extensive experience know how tedious and difficult the work of stringing beads on a fishing line or thread can be. Hands and eyes get tired quickly, even with a minimal amount of work. You have to tinker for hours, but the volume is minimal. And if you have to redo it, then the desire to do it further disappears altogether. To help craftswomen, there is a spinner for, which significantly speeds up and simplifies the process.
Translated from English, Spinner means spinning machine. This reliable assistant, which is advisable for every craftswoman to use, regardless of skill level. There are many offers in the trading network. But the design is so simple that you can make it yourself. The information provided will introduce readers to how to make a bead spinner with your own hands. The most primitive machine, which is made from scrap materials that can be found in every home.
Step-by-step instruction
Before you make a bead spinner, you need to prepare the material. You will need:
- plastic container;
- rod (pen body, pencil);
- stand;
- scissors.
Follow the suggested instructions. It will only take a few minutes to work.
- Using scissors, make holes in the containers strictly in the center. It is not advisable to use a knife, as the hole will be uneven.
- Insert the rod, connecting the containers together as shown in the photo.
This is all the work, in front of you is a ready-made spinner.
Self-production option No. 2
To work you will need:
- plastic container;
- self-tapping screw
Just insert a self-tapping screw in the center of the container, and the bead spinner is ready. It is better to heat the screw head so that it sticks and remains motionless.
To make such a device at home, there is no need to involve men in the work. Any woman can handle this work on her own.
Improved model
To make it you will need:
- an old computer fan or other rotating element;
- container for beads.
- glue.
It is enough to secure the container on the rotating surface and the work can be considered complete. Insert a special needle into the container. Twist the device slightly, the beads are collected much faster.
Terms of use
If the craftswoman has no experience in using a spinner, then the attached instructions will help you quickly master the indispensable assistant.
- Fill the cup.
- Take a special needle for a spinner or simply bend a piece of wire.
- Place the needle or wire into the container.
- Scroll the container slightly with your other hand.
The beads are assembled on their own, all that remains is to move them further along or.
Having mastered this simple technology, you can save a significant part of the family budget. Presented in the trading network a large assortment spinners. But most of them are quite high. The store presents simple spinners With electric drive, which will significantly speed up the process of setting beads.
But if there is no need to purchase a ready-made spinner, then you will need a special needle. For example, if you need to string beads on a soft fishing line or thread, then without a needle, even with a spinner, it will be problematic to cope with this. This mechanical device done with my own hands in collaboration with a needle, will greatly facilitate the work of the craftswoman.
In beadwork, as in any handicraft, along with complex manipulations there are a number of simple monotonous operations. They take a lot of time, but further process is impossible without them. In our case, we are talking about stringing beads on a fishing line.
Fortunately, modern gadgets come to the aid of craftsmen. One of them is a bead spinner. Let's figure out what principle this device works on and how to make a bead spinner with your own hands.
Principle of operation
To understand how a bead spinner works, you need to imagine a regular spinning wheel.
The bowl with beads unwinds and the beads themselves are quickly put on the placed under right angle(90 degrees) fishing line.
Advantages
Using a spinner for stringing beads has a number of clear advantages:
- saves typing time required quantity beads;
- the load on vision is reduced, because there is no need to look for a hole in each bead yourself;
- labor productivity increases.
A bead spinner allows you to significantly speed up the weaving process. But there is only one case when this gadget will be absolutely useless to you. This is the creation of a product with complex pattern, when it is necessary to string beads on a thread according to color in strict accordance with the diagram.
Types and characteristics
There are two types of bead spinners on sale: manual and automatic. Let's look at each of them in more detail.
Manual
A hand beading spinner consists of a plastic, ceramic or wooden bowl placed on flat base with a convenient vertical handle in the center.
The bowl unwinds easily, allowing the beads to be threaded onto the fishing line. The master sets the rotation speed of such a spinning wheel independently.
Auto
The main difference between an electric bead spinner and a manual one is that its bowl rotates automatically. The master can only bring the fishing line. The spinning wheel runs on mains power, although you can also find a battery-powered bead spinner on sale.
How to make a spinning wheel with your own hands
However, many needlewomen prefer homemade spinning wheels.
Photo source: http://biser-mania.ru/master-klassy/spinner-dlia-bisera
So, in order to make a bead spinner you need to find:
- round plastic box with a flat bottom;
- body from ballpoint pen;
- ruler to measure the required distance;
- pencil to make markings;
- stationery knife;
- scissors;
- candle or lighter.
Creation algorithm homemade spinner for beads the following:
- From the base of the box, a distance of 27 - 29 mm is measured upward, a line is drawn, the excess part is cut off and the edges are singed.
- In the center of the base of the box stationery knife a hole is made into which the body of the ballpoint pen is tightly inserted. (To prevent the handle from slipping out, you can glue it with a glue gun).
- The operation of the spinner is checked. It should spin like a spinning top.
Application
Let's take a step-by-step look at how to use a spinner for stringing beads:
- 2/3 of the bowl is filled with beads.
- The end of the line is bent 90 degrees and lowered into the bowl.
- The vertical rod carefully unwinds clockwise.
- Beads are put on a fishing line.
As you can see, using such a device is convenient and simple. However, its ability to simplify the process of creating any jewelry is very obvious.
Storage and care
Neither purchased nor homemade devices don't require certain conditions storage, except in a clean, dry place and protected from children and pets.
Plus, the running parts of purchased spinning wheels can be lubricated with machine oil.
- If you are a professional bead weaver and do large amounts of work, then an automatic spinner will be your faithful assistant.
- For those who are just starting to learn the basics of working with beads and do not want to waste time on monotonous stringing of beads, a hand spinner will be useful.
- If you are not sure of the benefits of such a gadget and do not want to spend extra money, then try making a bead spinner with your own hands.
However, which gadget to give preference to, each master has the right to decide for himself.
Despite the fact that the peak of popularity of the anti-stress toy that was fashionable in 2016-2017 has begun to subside, many are still looking for ways to create an original little thing that will help them spend time not boring on long trips, long queues or difficult situations. life situations. Naturally, we are talking about a do-it-yourself spinner. How to create it at home, and what you need for this - read more in our material.
What are spinners for and how do they work?
Each twist dismantles the individuality of its owner. Fidget spinner is a rotating flat or three-dimensional toy that is popular with adults and children around the globe. Its main purpose is to occupy and distract . Some people think that spinner is useful , because thanks to him you can take a break from everyday life and psychological problems, relieve irritability, get rid of anxiety. Others claim that thanks to the turntable you can focus on the right things , distracting from everything unnecessary. Be that as it may, the fame of the toy does not need explanation, because literally everyone loves it.
There are many forms of the so-called hand twister. It will depend not only on the invented design, but also on the components available in stock. To understand the specifics of the work when creating a spinner with your own hands, you need to know just a few important points.
Mandatory traditional elements of a spinner are:
- bearing;
- wings.
The most important part of the spinner is the bearing. It will depend on him how long and quickly the toy will spin, as well as its sound accompaniment and vibrations produced. In many homemade toys bearings are often replaced with primitive toothpick designs , which also allow the toy's wings to spin.
Popular articles:
Wings, or petals, can be from two to six , but often you can find two or three petals. It is these elements of the spinner that give room for imagination, allow you to embody bold ideas and show individuality.
Unusual design one of the most primitive forms of a toy - round. The so-called twisters made from plastic, metal, wood, cardboard and many other materials. Often materials are combined. IN Lately plastic or metal toys with glowing wings.
Products made of plastic, wood and copper. The design of many hand-made spinners is amazing. Many people decorate their toys with interesting engravings, illustrations, and icons. . The model of a small spinner that fits in the palm of your hand allows you to characterize its owner without further ado.
Spinner in the shape of a snitch. 
Fairy-tale illustrations and details look very interesting on spinners. 
Men's design turntables. 
Lately, glow-in-the-dark toys have become very popular. 
Fidget spinners in women's design. Today, a spinner can be bought in almost any store. There are budget models, and there are expensive original or even designer ones. But to stand out from the crowd, you need to make a certain effort, for example, make it yourself original item for yourself or your child, relative, friend (for example, as a gift). If a child asks for such a fashionable product as a spinner, so much the better, because he can be attracted to creative process, starting with the choice of model, and ending with the creation of a memorable toy.
General instructions before starting work
Before you start working on your spinner, you need to have an idea of what exactly a person wants to get as a result. To ensure that the result does not disappoint, you need to work according to a simple scheme.
- Stage No. 1 - selecting a model and design
Because possible models There are countless spinners, and we are all different, and we like different things, then first you can choose suitable model from the simple ones. This is necessary so that the process does not turn into punishment. Or you can go the other way and choose the most original model from a special material unusual shape. This option is suitable for those who have already tried to create things with their own hands.
Options for creating a hand spinner with your own hands. - Stage No. 2 - draw and draw
For everything to work out, you should take care of the drawing on a scale of 1:1. You can draw the future spinner model on paper, or you can search for ready-made drawings on the vast expanses of the Internet.
Drawings and blanks. - Stage No. 3 - prepare tools
Now that the creator has decided on the design and the schematic image is ready, you can begin to prepare all the necessary materials.
The first step is to purchase (or withdraw from old technology) bearing. It can be made of metal or ceramic. The most acceptable option is a diameter of 2 mm. To ensure a pleasant pastime in the future, professionals advise clean the part from grease in a "bath" of gasoline before it ends up in the toy. Why clean the bearing from grease? It makes the rotation slower, and also gets your hands, clothes and furniture dirty.
In addition to the spinner assembly parts, you will also need the following tools:
- Construction marker (pen, pencil, regular felt-tip pen);
- Scissors;
- Stationery knife;
- Elements decorative finishing(optional);
- Glue;
- Special tools for creating the wings we need (tools for working on wood or metal).
Preparatory stage. - Stage No. 4 - creating a spinner
When the preparation is complete, you can safely start making the toy with your own hands. Next, we will consider several popular options for creating spinners from various materials in several ways.
Varieties of hand twisters made from improvised means. Spinner made of paper and cardboard without bearing
The most popular option for those who are in no hurry to run for a bearing and cut out squiggles from metal or wood is to make the first simple spinner from cardboard and paper. It’s really not difficult to do this with your own hands, and if you show a little more imagination, then a simple cardboard can turn into an original canvas for your favorite icons or drawings.
Tools for work:
- ruler;
- compass;
- pencil;
- pen;
- scissors;
- stationery knife;
- cardboard;
- glue;
- toothpick;
- nut - 2 pcs.
You can watch the step-by-step process in the video:
Using plastic covers
Another easy way To create a spinner with your own hands, which will require a little more time, is a model from ordinary bottle caps. By the way, this method also does not require bearings. Here's a little step-by-step instructions.
Tools for work:
- caps - 4-6 pcs.;
- plasticine (you can use kinetic sand);
- glue gun;
- glue stick;
- lighter;
- awl;
- stationery knife;
- toothpick;
- scissors.
Progress:
- Fill three lids (or more if the spinner has more wings) almost to the top with plasticine. We secure it with a layer of glue from a gun, which should fill the lids to the top.
- The main cap remains without filler. We make a hole in it with an awl in the very center. We glue the lids with plasticine on the sides to this central part of the future spinner. It is important to do this at an equal distance from each other.
- Take a glue stick and cut off two equal parts - about 1 cm each.
- We break the toothpick in the center. We insert it into the central cover and attach pieces of silicone rod to the ends so that it is convenient to hold the piece of wood.
- Your DIY spinner is ready!
Wooden with bearing
A wooden spinner is the most pleasant and affordable option, which you can create with your own hands. A real lesson in labor for adults and children!
Tools for work:
- Glue gun;
- Bearing 2 mm;
- Plywood sheet, thickness 5 mm;
- Several coins;
- Drill;
- Hand jigsaw;
- Clamp;
- Scissors;
- Sandpaper;
- Pencil or construction marker;
- Ready-made spinner template.
Progress:
- Print out the diagram and cut it out. We fix it on a plywood sheet and trace it. It is necessary to mark the places in each of the circles where there will be holes.
- We drill the door on the sides of the circles additional holes, allowing you to cut beautiful figure circle from inside the wing.
- The future spinner needs to be cut out of plywood with a jigsaw. Then carefully sand the edges and surface until the surface is smooth.
- The bearing must be inserted into the hole prepared for it in the center. If you have difficulty, you can use a hammer and hammer in metal element in a wooden one.
- The wings of the “spinner” need to be weighted down—for this you will need coins. You can glue the weights for each hole in the following order: a coin with a face value of five rubles, then two, and again five, as shown in the video.
- You can cover it with a solid color paint, or you can decorate it with another interesting and in an original way- there is room for imagination, which is so nice to realize with your own hands.
Video tutorials on creating spinners
To get comfortable with creating a spinner with your own hands, you can watch some video tutorials on this topic. The conditions for creation can be very different, as well as materials and styles, but a homemade spinner can turn out no worse than a factory one.
Here's another way to create paper twisters, this time in the shape of shuriken :
Minimalistic spinner made of bearings and clamps:
And here great option“turntables” for girls: