Having received a quest from Cardan in the Zaton location, when he asks you to find various tools for him, head to the abandoned one. Without engaging in battle with zombified stalkers, go around the warehouse building on the hill and go down to a separate destroyed house.
Run past the stalled truck and dive through the doorway. Shoot the zombies inside the house, then in one of the 2 rooms find the stairs leading to the attic. Search small room and pick up the tools.
Each technician needs 3 types of tools: tools for rough work, tools for fine workmanship and calibration tools.
However, leaving the attic is not so easy. Zombified stalkers will gather in a heap to shoot and block the passage, preventing the player from exiting with inaccurate but dense fire. Break open the boxes in the attic and take out the grenades. Throw them into the cracks on the floor into the cluster of dead stalkers. When those are scattered by the explosion, go down and run as fast as possible.
After this, you should visit the substation west of the Circus anomaly. As you approach it, you will be stopped by the menacing shout of the mercenaries holed up in it. Make an agreement with them, promising to bring food. In exchange for food, the mercenaries will allow you to dig around in the backyard of the substation, where, after a short search, you will find another set of tools.
Nitrogen Tool Set
Moving to the Jupiter location, you will also have to look for tools for a local technician named Azoth. To do this, walk along railway tracks south until you come across an abandoned train on a bridge. Climb onto the bridge and jump down the open hatch on the roof. Run through the cabin to the vestibule, where you will find tools on the floor. Having received what you want, jump onto the windowsill, sit down and climb out the window.
Another set of tools is located on the territory of the Jupiter plant. To do this, go to the “Concrete Bath” anomaly, where you will find the iron gate leading to the factory yard. Once inside, move to the right multi-storey building, where you climb to the very top. On top floor There will be tools in the right corner.
The tools for each technician are interchangeable. You can take the tools from the Jupiter location to Cardan at the Zaton location, and you can give the tools from the Zaton to Azoth at Jupiter. Such a replacement will not affect anything.
Calibration Tools
Having reached the Pripyat location, go north to the old building of the former KBO. Go to the second floor and search the shelves, one of which will contain tools. Take them and fight off or run away from the burer who attacked you.
Another set of tools is in the south dead city in the basement of a department store. Having climbed into it, you will be attacked by a flock of mutated jerboas. Disperse them with bursts and follow the fleeing monsters. Run after them into the closet that served as their nest, finish off the remaining rodents and pick up the tools.
Scientific organization of labor at workplaces of lines and maintenance posts, in zones and departments current repairs is a great reserve for increasing the productivity of repair workers.
The section contains standard projects for organizing workplaces for repair workers of motor transport enterprises: mechanics - engine mechanics, aggregators, battery workers, carburetor mechanics, electricians, tire fitters, coppersmiths, painters, upholsterers, locksmiths and workers who perform daily vehicle maintenance, first and second maintenance ( TO – 1 and TO – 2).
The equipment of workplaces provided for in these standard projects was adopted according to the sheet of technological and garage equipment at motor transport enterprises, as well as according to the recommendations of scientific research organizations and on the basis of the best experience of the best motor transport enterprises in the country.
Spare parts and necessary technical documentation are provided to workplaces centrally.
Each workplace must have a first aid kit, a sink with cold and hot water, a mirror, soap, a towel or an electric hand dryer.
All workplaces and areas must be equipped with fire extinguishing equipment.
Below are the symbols for Fig. 33 – 48:
1. Workplace of a mechanic - car repairman for fuel equipment (carburetor operator)
The main functions of a carburetor technician are: repair and maintenance of power system devices removed from vehicles; performing seasonal maintenance of power system devices.
Faulty devices or individual parts removed from the vehicle are taken to the carburetor operator’s workplace and washed in a washing unit. After washing, devices or individual parts are blown with compressed air on a workbench equipped with a ventilation suction.
The technical condition of devices and parts of the power system is determined by inspection and testing in special installations. Devices that turn out to be serviceable, but require adjustment, are adjusted and then sent to revolving fund or warehouse. All repaired devices are adjusted and tested.
To ensure normal production activities of the carburetor department and reduce vehicle downtime due to malfunction of instruments or parts of the power system, the carburetor operator’s workplace must have a minimum supply of working units and parts, the size of which is determined by the production and technical department of the enterprise in accordance with the established working capital limit.
There must be a strict division of labor between carburetor workers. All complex work and adjustments are made by a carburetor operator who has a higher (4th) rank. The technological equipment of the carburetor operator's workplace consists of equipment, tools, devices and devices selected according to the types and volumes of work listed in the specification and shown on the layout of the carburetor compartment (Fig. 28). Organizational equipment is selected in accordance with the requirements of the scientific organization of labor for successful and high-quality execution basic and additional functions.
The area of the carburetor compartment is determined by summing up the areas occupied by technological and organizational equipment, taking into account the equipment density coefficient of 4.
To perform the total amount of work, three carburetor operators of the 4th and 3rd categories are required. In this case, two carburetor technicians (3rd and 4th categories) work in the carburetor department and one (3rd category) on the line or maintenance area.
In accordance with the current Standard Standards, the carburetor operator is issued the following workwear and special footwear: a cotton suit; vinyl chloride apron; rubber boots (on duty); vinyl chloride sleeves; combined mittens.
Workplace equipment (Table 44 – 46)
Table 44 Technological equipment
|
Name |
Type or model |
Quantity |
|
|
Bath for washing parts | |||
|
A device for checking carburetor jets and shut-off valves |
NIIAT – 528 | ||
|
Device for testing fuel pumps and carburetors | |||
|
Limit tester maximum number shaft revolutions |
NIIAT – 419 | ||
|
Device for testing the elasticity of diffuser plates |
NIIAT – 397 | ||
|
Device for testing the elasticity of fuel pump diaphragm springs | |||
|
Device for testing fuel pumps on cars | |||
|
Desktop – drilling machine | |||
|
Manual rack press | |||
|
Tank for control measurements of fuel consumption on the line | |||
|
Electric sharpener | |||
|
Pneumatic clamping fixture for disassembly and assembly |
Table 45 Technological equipment
|
Name |
Model or GOST |
Quantity |
|
Set of hand tools for a carburetor mechanic and adjuster | ||
|
Taps 2 M18 X1 for straightening the thread for the carburetor jet block | ||
|
Fitter knife | ||
|
Electric soldering iron 90 W | ||
|
Round hog file 2000 mm | ||
|
»» triangular 150 mm | ||
|
»» flat 200 mm | ||
|
»» personal round | ||
|
»» triangular 150 mm | ||
|
»» flat 200 mm | ||
|
Combination pliers |
GOST 5547 – 52 | |
|
Nippers (needle-nose pliers) |
GOST 7282 – 54 | |
|
Bench hammer weighing 500 g |
GOST 2310 – 70 | |
|
» copper weighing 500 g |
PNM 1468 X17 – 370 | |
|
Bench vice |
GOST 4045 – 57 | |
|
Compressometer | ||
|
Densimeter for petroleum products with thermometer 30.629 – 0.750 (measurement limits) |
Type 829 GOST 1289 – 57 | |
|
Glass graduated cylinder up to 500 cm 3 | ||
|
Technical scales with a weight of 200 g | ||
|
Machine for hand saws | ||
|
Hand saw blade |
GOST 6645 – 68 | |
|
Probe, set No. 3 of plates |
GOST 8925 – 68 | |
|
Metal ruler 500 mm |
GOST 427 – 75 | |
|
Test plate 200 X200 |
GOST 10905 – 64 | |
|
Nylon brush | ||
|
Sets of special taps for driving carburetor threaded holes | ||
|
Sets of special taps for tapping threaded holes in fuel pumps |
Table 46 Organizational equipment
|
Name |
Type or model |
dimensions in plan, mm |
Quantity |
|
Workbench for disassembling and assembling carburetors | |||
|
Cutlery table | |||
|
Equipment stand |
ORG 1019 – 209 | ||
|
» for organizing tools | |||
|
Sectional rack for storing carburetors |
ORG 119 – 505 | ||
|
Chest for cleaning materials | |||
|
Urn for collecting non-ferrous metals | |||
|
Cabinet for storing materials and parts | |||
|
Waste chest | |||
|
Tool storage cabinet | |||
|
Office desk |
MRTU – 13 – 08 | ||
|
Bench stand for tools | |||
|
Lifting and swiveling metal chair |
Technological equipment in the ATP is designed to ensure the ability to perform the entire complex of preventive and restoration work for automobiles, increasing productivity and labor quality, increasing labor safety and reducing the enterprise’s impact on the environment.
A wide variety of work carried out on a car requires the use of specialized and universal equipment wide range.
ATP technological equipment is divided into main, auxiliary and special. TO auxiliary equipment include: various carts, cabinets, bathtubs, tables, racks, drawers.
Special equipment includes tools for vehicle maintenance and repair: keys; mandrels; pullers; pressure gauges; probes; dynamometers; technological equipment, etc.
The main technological equipment for general technical purposes is divided into the following groups:
– lifting equipment.
– transport equipment.
– equipment for assembly operations.
– equipment for cleaning and washing cars.
– lubrication and filling equipment.
– equipment for painting and drying works and anti-corrosion treatment.
– equipment for carrying out body repair work.
– tire fitting and repair equipment.
– equipment for carrying out diagnostic work.
Lifting equipment is widely used at ATP. Lifting equipment includes: lifting mechanisms, hoists and winches; span and jib cranes; various types of lifts.
This equipment is used for lifting, moving and feeding Right place vehicles and their assemblies, as well as for lifting and holding the vehicle in a raised state in order to ensure free access to all components and assemblies during inspection and repair.
Figure 7.1 – Classification technological equipment ATP
Transport equipment includes garage chain conveyors: load-bearing, pushing and driving – suspended and floor-mounted. This equipment is used for transporting cars and their components during maintenance and repair. Conveyors ensure a constant speed of movement of vehicles and their units and reduce air pollution in the working area.
Equipment for assembly operations is designed to ensure mechanization of assembly and disassembly operations during vehicle maintenance and repair. This equipment includes: hand tools, impact wrenches, automatic and semi-automatic machines for assembling threaded connections.
Equipment for cleaning and washing cars is designed to remove debris and dust from the interior, body, platform of the car and wash the car as a whole. This equipment includes various vacuum cleaners, jet, jet-brush units, lines for washing and drying cars and equipment for waste water purification.
Lubrication and filling equipment includes: oil dispensing equipment, equipment for lubrication with plastic lubricants, combined lubricating and oil filling equipment, equipment for filling brake fluid and compressor equipment. This equipment is designed to provide refilling of vehicle units and components with lubricating oils, brake fluid, inflation of tires and control of their pressure.
Painting and drying equipment includes: painting and drying chambers, installations for application paint and varnish materials, paint sprayers and paint mixers.
Equipment for applying anti-corrosion coatings involves feeding and spraying the coating using compressed air directly on the bottom, in wheel arches and in closed voids of the body.
Equipment for body repair work is used to restore the geometric dimensions of the body after it has been damaged. This equipment includes special stands different designs and power tools.
In the game “Stalker: Call of Pripyat”, tools are needed to unlock new upgrades for your weapons and armored suit. At the beginning of the game, mechanics at the bases (Nitrogen and Cardan) can only make a few modifications to weapons - increasing the magazine and changing the caliber. For other improvements they lack for calibration and for rough and fine work. You can find them while exploring the Exclusion Zone. There are only two copies of each set, so searching without a map can be a little difficult. Ordinary stalkers will also tell you where the tools are in Stalker: Call of Pripyat during a conversation, but they can also misinform you.
Tools for rough work – Zaton
Mechanic Kardan, who is stationed on the Skadovsk, has truly golden hands (at least, that’s what those who have been on the ship say so), but even on the outskirts of the center of the Zone, tools are a bit tight – so we’ll go get them. First you need to find a sawmill on the map of the Zaton location. It is located in the northwest of the map. Go there, optionally taking a squad of individuals as your companions - it’s difficult to get through there without a fight.
Upon arrival, make sure that the sawmill, as the stalkers warned you, is inhabited by zombies. But they won’t cause many problems - shoot them in the head and finish them off if necessary. There is almost no fear of return fire - the zombies fire it very inaccurately. The only problem is their number, about 20 units, which can be intimidating for a beginner.
So, having dealt with the zombies, you can finally find out where the tools are in “Stalker: Call of Pripyat” on Zaton. Go down to the part of the sawmill that is located at the foot of the hill - we are interested in the building right in the center. We go into it, look for a ladder, climb it to the attic, go to the end and take tools for rough work from the box. Now you can return to the ship with the stalkers and give the tools to the mechanic, in return receiving a small amount of money and the opportunity to make new weapon modifications.
Tools for fine work – Zaton
Then your path lies to the south - to the substation workshops. Hearing the detector beep
stalkers, do not be alarmed - this is a group of neutral mercenaries, they are now only capable of retaliatory aggression. The problem is that they won’t just let you into the workshops themselves... As it turns out, the mercenaries have run out of food supplies. Bring them six units of any type of food - for example, canned food. After this, the leader of the mercenaries, Tesak, will suddenly become kinder and let you into the camp, but with one condition - not to take out your weapon. And if you are not confident in your abilities, then it is better to follow the “advice”.
Walk to the end of the road, turn 180 degrees clockwise and enter the workshop. You also need to go through it to the end, then turn left twice - you will find yourself at the group’s resting place. Pay attention to the mercenary sitting on the box. To the right of him lies the treasured box - take it and exit through the roof technical room from the camp area, then return to Skadovsk. Now it remains to find out where the tools are located in “Stalker: Call of Pripyat” in the “Vicinities of Jupiter” location.
Tools for rough work - Jupiter
Upon arrival at Yanov, your main character will be met by technician Azot, working on the Dolgovsky half of the shelter. He also needs tools. Without them, he too can only repair and carry out basic modifications. In the world of the game “Stalker”, finding tools is not an easy task, so you’ll have to run around again.
Leave the station and walk along railway to the southwest. Climb the bridge, jump from it onto the roof of the electric locomotive, go to the end of the train and climb inside. An electrical anomaly is moving around the carriages - try to avoid it by waiting for it in the nooks and crannies of the carriage. Now you need to go to the beginning of the train, take the tools and jump out of the broken doors. Now you can return to Azot on the Yanov.
Tools for fine work - Jupiter
To get them you will have to go to the plant itself - it is located in the southeast of the location.
You need to approach the complex from the “Concrete Bath”, which is located near the western wall of “Jupiter”. Facing the anomaly, turn to the right - you need
enter the southern gate of the plant, it will be right in front of you.
As you ascend to the factory grounds, pay attention to the building on the left. You need to enter it - the doors are located on both sides of the building at its end. After going up the stairs and passing through a small corridor, you will find yourself in the attic. Here, having carefully paved the way between "electr" to opposite wall, you need to open the green cabinet, in which the treasured box of tools will lie. Take it and leave the building by opening the door on the left. Where are the tools in Stalker: Call of Pripyat that are needed to calibrate equipment? More on this below.
Calibration tools - Pripyat
Almost all the tools necessary to improve equipment in the game “Stalker” have already been collected. Pripyat is the only location where you can find the last two sets. The first one is located in the department store building. Go deeper, simultaneously opening the doors to a flock of jerboas - they are non-aggressive if you do not attack them. The mutants will guide you through the labyrinth of store corridors. Don't rush to follow them deep into the basement - the set lies right next to the stairs on the table.
The second set is located in the building of the old consumer services plant (KBO). Carefully
walk past the electrical anomalies and go up to the second floor. Here you need
will kill the Burer - one of the most powerful mutants in the game. Experienced players
They prefer to do this with a knife. After the massacre, go to small room at the end of the hall - the last set of tools in the game will be on the table. Take it to the technician and complete the modification of your equipment!
Selection and definition required number diagnostic and repair equipment for motor vehicles of various types and capacities
Technological equipment, as one of the main parts of the material and technological base of maintenance and repair, significantly affects the labor intensity, quality and cost of work, the efficiency of the entire process of maintaining rolling stock in technically sound condition, as well as the productivity and efficiency of vehicle operation.
Wrong choice of equipment leads to: significant economic damage; loss of energy, materials, and sometimes to accidents and downtime at work stations. An increase in the number of pieces of equipment and an increase in the complexity of the equipment when it is used wrong choice leads to an unjustified increase in the number of service personnel, an increase in material and financial costs. Therefore, the choice of equipment is the most important stage development and implementation of measures for mechanization of maintenance and repair at each ATP.
The list and characteristics of the selected equipment, the number of samples of the same name are determined by the requirements arising from the intended goals, scale and content of mechanization measures, and largely depend on the power of the ATP and the available equipment.
Experience shows that greater efficiency of mechanization is achieved if the use of new equipment is reasonably combined with the most effective elements of the current work technology and the use of equipment samples available at the ATP.
ATP various types and capacities have different requirements for the nomenclature and number of equipment samples of the same name.
With an increase in ATP capacity, conditions arise for deeper differentiation of work and specialization of work stations, and there is a need to redesign technological production units to significantly increase bandwidth zones, areas and labor productivity of performers.
In these conditions it is not enough the right decision mechanization issues only due to the corresponding number of equipment of the same name. The use of more advanced, high-performance equipment is required, each of which is capable of replacing the existing ones.
The use of high-performance equipment not only reduces the need for labor force, but also influences the organization and technology of work at a given work station, and also often on other adjacent or technologically related ones, thus influencing the need for other samples.
The above indicates an inextricable connection between the organizational and technological aspects of production, the technical capabilities of LTPs of various capacities and equipment of various capacities, as well as the need for an integrated approach to determining the range of equipment and the required number of samples of the same name.
Selection of diagnostic and repair equipment for ATP and service stations
When choosing equipment, numerous technical, economic, production, and operational requirements are taken into account; their totality can be satisfied at each ATP by various sets of equipment, and certain requirements will be met to varying degrees depending on the specific tasks of mechanization or automation of work. In this case, a multi-alternative task arises of selecting and determining a set of equipment that would best provide the solution to these problems.
For an informed or comprehensive choice necessary equipment For example, the following must be taken into account:
1. technical characteristics, scope, capabilities of each sample;
2. design of vehicles and their service areas using this sample;
3. adaptability of this sample to the types and models of cars available at the ATP;
4. daily or annual labor intensity of vehicle maintenance and repair at the ATP and its share attributable to work using a sample of equipment;
5. number, design, location and specialization of maintenance and TP posts;
6. organization and technology of maintenance and repair at ATP;
7. economic indicators Maintenance and TP and equipment (cost of work, sample, effectiveness of its use, etc.).
Choosing the necessary equipment naturally involves comparison various options technical support work taking into account various criteria and factors, determining the best combination diverse local production conditions and technological equipment capabilities.
The data characterizing the production conditions of the ATP are further called the ATP factors, and the indicators of the technical characteristics of the equipment are called the equipment factors.
Selecting equipment and determining the required number of its samples of the same name consists not only of obtaining or calculating the necessary data, but also of comparing, mutually linking production requirements and the capabilities of the sample.
Although, in some cases, equipment factors can play a primary role (for example, when introducing fundamentally new high-performance equipment, technology changes significantly, and often the organization of maintenance and repair work), and they cannot be considered leading.
Firstly, because such cases are not typical and are observed very rarely, and secondly, because the choice of equipment must always comply with production requirements. Therefore, when choosing equipment and determining the required number of samples of the same name, the primary basis should be the conditions and requirements of production, and therefore the ATP factors.
ATP factors.
1. “ATP capacity” includes data on the list quantity
cars for ATP, and therefore predetermines the daily (annual)
maintenance and repair program and, accordingly, their labor intensity.
The complexity of groups of work or operations by type of maintenance and TP are the basic indicators for determining the need for ATP in many types of equipment - washing and cleaning, lifting and inspection, etc.
2. “Specialization of ATP” characterizes mainly the specialization of ATP in terms of the composition of the vehicle fleet and its type (trucks, cars and buses). He has great importance with a mixed fleet, when choosing equipment specialized for one or two types of vehicles.
3. “The design of vehicles” that are part of the vehicle fleet provides for the need for a more in-depth consideration and detailed consideration of the requirements arising from the characteristics of the design and operation of individual units, vehicle components and the performance of work on them. These requirements are taken into account when choosing highly specialized equipment, for example, the installation of the K-465M model for testing power steering, designed to test the steering directly on cars.
4. “The number of workers, posts, zones and sections” includes the corresponding actual, prospective or calculated (for the construction of new ATP facilities) data. This factor is important when choosing the equipment necessary for arranging and equipping posts or equipment for individual use, for example, workbenches, kits wrenches and etc.
5. “Layout and dimensions of zones, sections, posts” involves the characterization of actual, prospective or calculated operational data of the ATP, the influence of which is manifested mainly when choosing equipment intended for use in different zones, at several sites, posts (for example, carts for transporting and dismantling car wheels, garage jacks, etc.).
6. “Energy-air-water supply” accumulates questions that characterize the capabilities of ATP in providing technological equipment with types of its drive, cooling, etc. The factor is important when choosing equipment of the same value, but with various types its drive, cooling work, for example, solid oil blowers, etc.
7. “The system for organizing maintenance and repair at the ATP” combines issues and requirements for equipment arising from the features of organizational and management decisions carried out at the ATP. The factor is important mainly for large ATPs, where it is often necessary to solve the problems of complex mechanization and automation of maintenance and repair processes, for equipment designed to support constant, specified processes in any production cycle (washing operations, recording and transmission of diagnostic information and etc.).
8. “Technology and content of maintenance and repair work” includes questions on equipment and requirements for it, various technological principles and the nature of performing individual operations or their complexes, the need for more differentiated approach to the choice of equipment in relation to the current or standard technology in the ATP.
9. “Specialization of maintenance and repair posts” covers issues related to the characteristics of the equipment of posts and the work performed at them. It provides for a number of additional requirements for equipment: suitability for use in the given conditions of specialization of posts, technology of work on it, distribution of work between performers, etc.
10. “Basic devices of a maintenance and repair station” combine requirements for the selection of equipment related to different designs lifting and inspection basic devices (inspection ditch, lift, overpass, etc.). These devices are called basic because they determine the type of post, its capabilities and the conditions for performing work.
11. “Safety precautions” includes issues of ensuring work safety when performing maintenance and repair operations. This factor is universal, as it applies equally to both people and equipment. He has special meaning when work is performed simultaneously by several performers.
Equipment factors.
1. “Main purpose” contains information about the functions performed by the sample and its intended purpose, which are given in the name of the equipment, in its technical documentation or instructions for use.
2. “Scope of application” combines data on the possibilities of using equipment in enterprises road transport(ATP, service station, etc.) for certain types of cars, etc. Taking this factor into account when choosing equipment for products manufactured by plants of the Rosavtospetsooborudovanie association, as a rule, does not cause difficulties, since it is clearly defined in its technical specifications. Some difficulties arise when choosing equipment for general technical purposes (welding equipment, metal-cutting machines, etc.), which is produced by factories in various industries.