What is the difference between laminate and parquet boards, parquet and solid wood? Differences between laminate, parquet boards and parquet HDF load-bearing board.

When a serious renovation is underway in an apartment, the owner inevitably faces the question of choice. flooring, and most often this question is - which is better, parquet or laminate? The tree is the oldest building material, people have long appreciated its practicality, and over the last century they have begun to pay more and more attention to the environmental friendliness of wood. But before solving the dilemma, parquet or laminate - what to choose, of course, you need to understand the difference between their properties, compare the advantages and disadvantages.

• Variety of types of wood flooring
• Design differences
• Price
• Advantages and disadvantages of parquet and laminate
• Installation
• Appearance
• Exploitation

Variety of types of wood flooring

Humanity has come up with quite a lot of floor coverings, the names of which contain the words “parquet” or “laminate”:

• laminated parquet;
• parquet board;
• laminated flooring, etc.

So that the ignorant buyer does not get confused in this variety, we will describe the main ones.

“Laminate flooring”, “laminated parquet” and simply “laminate” are the same thing.

And the variety in names is explained by the constant improvement of manufacturing technology of this coverage, the quality characteristics of which are constantly growing, and it itself looks more and more like natural parquet. That is, laminated parquet is the same laminate, but more reminiscent of natural dies.

Regarding parquet and parquet board, then these are completely different things:

• Classic parquet consists exclusively of hardwood. There are many types of parquet.
• Parquet boards appeared much later and are a material made from glued wooden planks in several layers. At the beginning, parquet boards were made from parquet production waste.

Design differences

Comparing laminate and parquet should start with something in common - both of them finishing materials are made of wood, and the parquet consists entirely of it.

Here lies the main difference between parquet and laminate, since in the manufacture of the latter, other materials are used along with wood.

Moreover, if European manufacturers laminate consists of 90-95% wood, then in Chinese products there may be no more than half of it.

Laminate is like a layered cake: the main layer is made of wood fiber, similar in structure to plywood or fiberboard, and the other layers are artificial materials - paper and resins. The front side of the laminate is made of very durable and wear-resistant plastic, which is used to laminate the product, hence its name. Underneath this transparent plastic There is also a film that has a pattern that imitates the texture of wood - it is this that determines the appearance of the laminate. The same technology is used to produce low pressure laminate.

Video about the differences in manufacturing and performance characteristics of parquet and laminate:

Price

Listing the characteristics that demonstrate the difference between parquet and laminate, one cannot fail to note the price, which is several times higher for parquet than for any laminate.

The difference is significantly influenced by both the type of wood and the quality of the laminate. The most expensive brands laminate is not much cheaper than parquet. But if the buyer already has enough money for an expensive laminate, then it is better to add a little more and buy parquet, which will have a number of advantages.

If financial issue doesn’t matter at all, then you definitely need to go with a solid parquet board, or even better - with piece parquet.

Advantages and disadvantages of parquet and laminate

For the consumer, of course, there is no more important question than which material will perform better during operation.

Advantages of parquet

• parquet can be restored many times;
• good thermal insulation makes parquet floors warm;
• good sound insulation;
• durability (with high-quality installation, material and adequate operating conditions, the service life of parquet will be tens of years);
• hypoallergenic;
• dust is not attracted to the wood.

Cons of parquet

• dents and scratches easily appear on the parquet;
• caring for parquet is troublesome and expensive - every few years it needs to be sanded and varnished, and this requires a special grinding tool and specialist skills;
• The parquet restoration procedure is very lengthy (almost like full renovation) and is associated with the transfer of all furniture.
• very sensitive to fluctuations in humidity and temperature, which causes it to dry out, crack or swell;
  high price.

Advantages of laminate

• the operation of the laminate does not involve too much troublesome maintenance;
• with average intensity of use, laminate can last quite a long time - a couple of decades;
• the cost is cheaper than parquet.

Cons of laminate

• laminate is less durable than parquet;
• it cannot be restored.

A common limitation for both parquet and laminate is that both of these coatings cannot be used in rooms with regular high humidity(bathrooms, kitchens), this also needs to be taken into account when washing parquet and laminate flooring.

You should know that both coatings are quite suitable even for daily use. wet cleaning, but the rag must be thoroughly wrung out, preventing excess water from getting onto the surface.

Video about the differences between parquet and laminate:

Installation

As for laying these coverings, in the case of laminate it looks much simpler. Inviting specialists to install it will cost much less than laying block parquet.

Modern laminate flooring is a little more difficult to install children's construction set, and no expensive or specific tools are required.

Special locks are made on the laminate strips, with the help of which they are easily, smoothly and reliably connected, and the final coating looks monolithic.

The advantage of laminate in installation time is also obvious, because the area of ​​an average-sized room can be covered with it in one to two hours. If in the same room you place piece parquet, then the matter will drag on for a day, or even two.

In this sense, the Solomonic solution may be the use of parquet boards. The technology for installing it is closer to installing laminate than block parquet, which is very reminiscent of assembling a mosaic.

Appearance

There is no doubt that well-maintained natural parquet will look much more refined and luxurious than laminate. Although, with the development of technology, not every consumer can distinguish a modern laminate floor from a parquet floor. It is not without reason that manufacturers spent a lot of effort to simulate a wood pattern on a laminated board, which has become almost indistinguishable from natural, so in many cases replacing parquet with laminate can go unnoticed.

Traditional parquet is strongly associated in the imagination with strict classical interiors of residential premises or formal halls. Laminate flooring can fit perfectly into either classic interior, and in modern times. This is facilitated by the huge variety of textures and shades that manufacturers have learned to impart to laminate flooring.

Laminate can imitate not only wood itself, but also tiles, marble, granite and a whole range of artificial and natural materials.

Exploitation

When comparing the behavior of parquet and laminate, it quickly becomes clear that the latter is colder and especially noisy, although the latter disadvantage can be quite successfully combated with the help of sound-absorbing substrates. And if you combine it with a heated floor system, then this disadvantage will turn into an advantage - heat will easily flow into the room.

But purchased high-quality laminate is not afraid of scratches from sharp ladies' heels or moving furniture, it will not fade in the sun and will not retain traces of indentation or static loads. Modern laminate is difficult to ignite and is quite moisture resistant.

When comparing the care of laminate and parquet, it should be borne in mind that the appearance of the latter is difficult to maintain if the owners often like to rearrange furniture, are used to walking around the house in heels, or have pets.

Wood is sensitive to delicate external influences, and in the absence of careful handling, its surface is noticeably damaged.

Therefore, it is necessary to scrape natural parquet every few years in order to remove the thin damaged layer from it.

If the microclimate in the room changes, the parquet begins to dry out and deform, causing an unpleasant creaking sound. Soft and hygroscopic wood does not like sudden temperature changes. Lacquered parquet may lose its attractiveness in terms of environmental friendliness, since toxic components may be released from the varnish.

Neither parquet nor laminate can surpass each other in every characteristic; each has its own strengths and weak. Therefore, the choice between these two floor coverings should be based on the buyer’s financial capabilities, operating conditions and the owner’s willingness to regularly monitor the appearance of the coating.

What would you choose – parquet or laminate, and why? Share your thoughts in the comments and explain them - other readers will be interested!

When choosing a floor covering, many are faced with the question of how laminate differs from parquet boards. To answer it, you need to understand the characteristics of these materials, the technology of their manufacture and installation.

Parquet boards and laminate differ in manufacturing and installation technology.

Manufacturing technology of laminate and parquet boards

The manufacturing technologies of these floor coverings have significant differences, despite the fact that they are based on natural wood. What is the difference between parquet board and laminate?

The parquet board has 3 layers: plywood, a main block of pine or spruce and a front covering made of valuable wood (beech, ash, oak, etc.). Each layer is laid perpendicular to the previous one to give the board strength and resistance to temperature changes and moisture.

Laminate also consists of several layers. The main layer is HDF material, which reverse side has a moisture-proof coating. Next, furniture paper is laid on it, which gives the laminate its color and texture. After this, the panel is covered with a special laminating layer, providing a solid and durable coating. The edges of each laminated panel are treated with moisture-resistant impregnation.

Both of these materials have a similar tongue-and-groove fastening system.

Advantages and disadvantages of laminate

Laminated coating can be different types. Laminate flooring differs according to the loads it can withstand: small, medium and high. This can be determined by the markings indicated on the packaging. The choice of one class or another depends on the purpose of the room and traffic. For example, for a corridor or kitchen you should choose a laminate designed for high loads, for a children's room - a middle class one, but in the bedroom the loads are minimal.

There are several classes of laminate. For office premises The most durable laminate of classes 31, 32, 33 is manufactured. For residential buildings and apartments, it is enough to use laminate of classes 21, 22 and 23.

Advantages of laminate:

• high resistance to mechanical damage and abrasion;
• antistatic;
• UV resistance;
• heat resistance;
• the ability to make a heated floor system;
• a variety of colors, patterns and textures;
• ease of maintenance and resistance to cleaning agents during cleaning;
• The warranty period is at least 5 years.

Disadvantages of laminate:

• not suitable for use in rooms with high humidity;
• poor sound insulation if you do not use a substrate under the laminate;
• inability to repair damage, only complete replacement damaged element;
• From the appearance it is clear that the material is artificial.

Advantages and disadvantages of parquet boards

When laying parquet boards, you can create various geometric patterns

Advantages of parquet:

• good noise insulating qualities;
• antistatic;
• durability and harmlessness of the varnished coating;
• the possibility of repeated repairs and restoration;
• stylish and sophisticated appearance, unique texture natural wood;
• ease of installation and maintenance;
• Warranty for parquet flooring is 10 years.

Disadvantages of parquet:

• not suitable for installation in damp areas;
• The varnish covering the parquet wears off faster during use than the laminate coating;
• demands on maintaining temperature and humidity conditions in the room.

Laminate or parquet: common misconceptions

There are some misconceptions associated with laminate and parquet flooring that are worth addressing and clarifying.

1. It is believed that laminate, unlike parquet, is not environmentally friendly pure material. However, it is not. Laminate has the same environmental class as parquet - E1. Parquet board, like laminate, contains an adhesive substance, which is also a chemical.
2. Laminate flooring is no more noisy than parquet. To avoid echoing, the laminate should be laid on a perfectly flat surface, with a sound-insulating substrate underneath it. Parquet boards laid floating without a backing also lose their soundproofing qualities.
3. Damaged laminate cannot be repaired, unlike parquet. But parquet laid in a floating manner is also quite difficult to repair. At the joints during the grinding process, it can sag, which can ultimately lead to the appearance of waviness on its surface and worsen its appearance.

Laminate laying technology

To lay laminate and parquet boards you will need a similar set of tools:

• laminate or parquet board;
• polyethylene film;
• soundproofing substrate;
• jigsaw;
• hammer and block for tapping;
• finishing crutch;
• wedges;
• PVA glue D3 (for the adhesive method of attaching parquet);
• roulette;
• pencil;
• knee pads to protect the knees from stress during work.

Laying laminate:

1. A gyro-insulating film is laid (if the base is concrete), the joints of which are secured with adhesive tape.
2. A noise and heat insulating substrate is being laid under the laminate.
3. Laying the laminate can be done starting from any corner of the room, but preferably in the direction from the window.
4. The lamellas are fastened as follows: the tenon of one lamella is inserted into the groove of the other. Be sure to leave 10 mm gaps near the walls by inserting pegs. Each lamella must be tapped with a hammer to avoid gaps. If necessary, you can place weights on the joints.
5. The outermost lamella in a row is trimmed, if necessary, and the remaining part can be used at the beginning of the next row. It is important that the cut part is at least 30 cm.
6. Laying down the last row laminate, you need to take into account their size and the remaining opening, taking into account the mandatory distance from the wall. To make this job easier, you will need special tool- finishing crutch.

Technology of laying parquet boards

There are two ways to lay parquet boards: floating and glued.

To maintain a beautiful appearance, the floor covering must be cared for.

The floating method of laying parquet boards is similar to laying laminate flooring. The adhesive method involves fixing the parquet to the base using a special glue, which ensures its reliable fixation. This method is suitable for laying parquet on a cement-sand or gypsum screed or concrete base.

Laying parquet using the adhesive method:

1. Substrate preparation: leveling, cleaning and priming, preferably with a synthetic primer.
2. Layout of parquet boards in the order in which they will be attached to the base.
3. Applying glue to boards.
4. Laying the first board with a distance of 6-12 mm from the wall. For convenience, special wedges are used.
5. Laying the second board with padding to the first. For this, a hammer with a block is used. The boards should be glued within 10 minutes.
6. After trimming last board in a row you need to immediately lay the rest of it at the beginning of the next row.
7. After gluing several rows, you need to make sure that there are no cracks or gaps in the coating.
8. After completion of the work, the ends must be covered with acrylic sealant or cork crumbs or install a metal threshold.

Now you know how to choose flooring and how to distinguish parquet boards from laminate.

The choice of this or that material depends on your taste preferences and material capabilities.

One of the important tasks interior decoration premises is to work with flooring. Unlike walls or ceilings, for which preventive procedures take several years, flooring should be used without replacement or major alterations for several decades.

Therefore, the question of what to choose as a floor covering will never lose relevance. One of the most serious debates on the topic of interior decoration of residential premises is the choice of material from which the floor will be made; what to give preference to: parquet or laminate? But you can read how good larch parquet is

What is the difference

Despite the apparent external similarity, parquet and laminate are completely different materials. The only thing they have in common is that they are multilayer materials based on wood. However, its state in these materials is very different.

Laminate is several thin layers artificial materials applied to fibreboard (fibreboard). If we consider its production, we get the following picture: a pattern is glued to the base in the form of fiberboard, repeating the appearance of wood, and this structure is covered on top protective layer made of artificial resin. In this case, a lower substrate is rarely necessary and there is no need to think separately.

Parquet is traditionally a three-layer construction, in which higher quality wood is glued onto a cheap board using a thin veneer.

You may also be interested in information about how to use

On video - detailed description all the differences

You may also be interested in information about how to lay the underlay under a parquet board and which one is the best, indicated

What to choose

The choice, naturally, remains with the owner, who needs to weigh the pros and cons for each of the materials under consideration in order to determine exactly what he needs for a particular room.

Let's look at the advantages and disadvantages of each coating:

Advantages of laminate:

• high moisture resistance;
• guaranteed “immunity” from fungi, mold and rot;
• excellent resistance to scratches or impacts;
• absence of manipulations in the form of varnishing and scraping during installation;
• ease of care - you can even use wet cleaning with special cleaning products;
• a huge selection of colors, patterns, shades and textures;
• resistance to ultraviolet radiation.

But how to choose the right parquet board for an apartment and what you should pay attention to is outlined

Disadvantages of laminate:

• damage requires segment replacement, which is sometimes very difficult;
• “budget” options require additional measures to protect against furniture legs. It is important to remember what it should be

Advantages of parquet boards:

• made from natural materials, considered more environmentally friendly;
• strength comparable to wooden floors made of high quality wood;
• there are no requirements for the base, since the thickness of the parquet is quite large;
• multiple grinding, repairs, and varnishing are possible without dismantling large areas.

But you can see how good ceramic tiles look like parquet

Disadvantages of parquet:

• high price;
• board maintenance requires availability special means and more time;
• a large number of scratches significantly spoil the appearance of the parquet;
• if the premises are flooded, the parquet cannot be repaired - a complete replacement is necessary;
• Protection from furniture legs is required.

Both types of materials are quite in demand and the owner’s task is to rationally weigh all the arguments relating to both practical and aesthetic aspects of interior design. You can read more about which one for an apartment in the article.

But you can see what porcelain tiles look like for flooring under parquet and how they can be installed on site

In the video - what is best to choose:

Is it possible to lay laminate flooring on old parquet?

This is how the laminate is laid on old parquet

The procedure for laying laminate flooring on a parquet floor consists of two parts: preparing the parquet flooring and directly laying the laminate flooring. Preparation consists of leveling the base, removing possible voids and eliminating those parts of the parquet that make creaking sounds when pressure is applied to them.

At the same time, the old parquet is tested for strength and attached more tightly to the floor. Since it will be hidden under a layer of laminate, this strengthening can be done completely in a simple way– attaching parquet segments to the floor using regular nails or dowels. The cracks in the parquet are sealed with special glue or mastic. Final alignment carried out using a special grinder for parquet or using sanding.

In this case, the difference in levels should not exceed 3-4 mm per meter of length.

After these manipulations, the parquet is cleaned and primed. On this preparatory work finished and the laminate can be laid. It is possible both with and without a substrate.

But how to properly use two-component parquet adhesive and how effective it is can be seen in this article

Here's a video showing how installation takes place:

You may also be interested in information about how good it looks

These artificial boards, which are used for finishing floors are attractive for many reasons - a huge range of designs front side(therefore, you can choose products for any interior), reasonable cost, and the ability to install it yourself (one of the components of savings). For an apartment, laminate is one of the best solutions. However, it is the variety of samples that often complicates their choice.

Visually, laminate boards are indistinguishable from each other, except for the shade. And, nevertheless, they are divided into classes, and the feasibility and specificity of their use in a particular room of the apartment depends on this.

general information

Before finding out what the difference is between the classes of laminate, it’s worth understanding the standards for these composite boards.

In the Russian Federation technical specifications for these products is determined by GOST No. 32304 of 2013. In particular, its table 3 indicates for which specific premises a laminate of a particular class should be used. But this is somewhat general information, which does not give to a person who does not have specialized education, an accurate understanding of what the differences between the samples are in terms of operation. There is one more nuance. All requirements are advisory nature, and some manufacturers use this fact as a legal “loophole”, since whether to be guided by the designated GOST or not is a purely voluntary matter. There are two European standards - EN No. 685 (2007) and No. 13329 (2006). They are almost identical to Russian ones (the differences are only in details), but there is also a fundamental difference - all their requirements are mandatory for the manufacturing company.

If you purchase imported laminate, then there will definitely be no mistake in choosing the optimal class. But questions may arise later regarding some types of domestic products in this regard.

Laminate flooring classes for apartments

When choosing a board, you need to focus on classes 21 - 23. Higher ones (from 31 to 34) are much better in many respects (wear resistance, maximum load and a number of others), but their cost is such that, from an economic point of view, such design of floors in residential premises sometimes it's just not practical. This is a product of the “commercial” category, and is used as finishing coating, basically, only in public, administrative, industrial and other buildings.

In apartments, finishing subfloors with laminate of classes 31–34 is extremely rare. Only very wealthy people can afford this. But if you have money, and a lot of it, then it is unlikely that the choice will be in favor of such a composite board, which, in addition to its advantages, is also characterized by a number of disadvantages (). After all, there are other options - piece parquet, for example.

Calculator for calculating the amount of laminate

What is the difference between laminate boards

In their structure they are almost identical, regardless of the class of laminate.

The same applies to a number characteristic properties inherent in this floor covering.

What is most relevant for an apartment:

• Resistance of the floor covering to abrasion and moisture.
• The maximum load that a laminate can withstand.

Everything else - its color design, texture, cost per m² - is at the discretion of the apartment owner.

Conclusion

For apartment the best laminate, if you focus on the budget option, products of classes from 21 to 23 are considered. Although more expensive samples - from 31 to 34 - will last much longer as a floor covering. Before choosing a laminate according to this indicator, you should compare the upcoming costs (taking into account the future, that is, the approximate frequency of repairs) and the specifics of the use of a particular room. It’s one thing if an elderly couple lives in an apartment, and another thing if it’s a young family with kids. For them, the floor is the main place for games, therefore, its abrasion becomes one of the most important criteria when choosing a laminate according to class.

In order not to have to repair your flooring too often, you should focus on products from manufacturers with an impeccable reputation. And here we are no longer talking about the class of laminate, but about the brand (in brackets - approximate prices in rub/m²). All designated boards refer to budget options– this can be seen in the cost of production.

• Laminate from Germany – Krono Floring (448), Classen (469), Kronotex GmbH&Co (481).
• Russian laminate – Kronospan (272) and Kronostar (373).

Such laminate, if the installation and operation rules are followed (which also means proper care), will serve as flooring in an apartment for at least 12 - 15 years.

For those who are willing to spend on finishing floors more money, it is worth paying attention to laminate brands Tarkett (590), KronoFloring (561), Classen (556), Pergo (814), Quik Step (from 990), Balterio (over 1,120). More expensive, but also more durable. The manufacturers of this laminate guarantee at least 20 years of flawless operation.

All recommendations, advice, reviews, opinions found on the Internet on the issue of laying a specific type of laminate in a particular room are nothing more than general information that can only be taken into account. Only the owner of the apartment, like no one else, knows all its features - the layout, way of life, habits of family members, its composition, and so on. Therefore, the choice of laminate involves individual approach- then there will definitely be no mistakes.

At the stage of laying flooring, many people are faced with the question: “what better parquet or laminate." You can make a decision in favor of one of the options only after all their advantages and disadvantages have been thoroughly studied.

Parquet

This material has three layers made of wood and located perpendicular to each other. This type of gluing gives the coating special strength and resistance to change. geometric shape. High-strength wood species (for example, beech, oak, maple, ash) are used in the production of the top coating layer. There are also exotic options, in the manufacture of which red or teak wood is used. Layer thickness 0.5-6 mm. The lamellas (second layer) are most often represented by pine or spruce and have an average thickness of 9 mm. The third layer acts as wood plywood 1.5 mm thick.

Classification of parquet by the number of planks

• Single lane. Visually it is a solid wood covering that looks great indoors large area. The cost of such parquet is quite high, because wide strips of expensive types of wood are used in production. Today you can buy boards with chamfers. After laying it, grooves are formed between the boards, which perfectly imitate seams, which allows you to achieve the effect of a solid wood covering.
• Two-way. It consists of two planks, divided into modules or laid in continuous strips. This type parquet is perfect for formal interiors.
• Three-way. This is the most common type. Three-strip board perfectly imitates a “deck” pattern and is used in interior design different types. Board width – 109-208 mm.
• Four-lane. This option is made from wood waste and is best suited for finishing a summer house.

Advantages of parquet

• Durability. The service life of the coating is 20-25 years.
• Environmental friendliness. This is completely natural product unlike many other types of finishes.
• Artistic styling.
• Maintainability.
• Noise insulation.
• Lack of static.
• Natural beauty of the material structure. No kind artificial turf cannot surpass the beauty of natural wood.

The disadvantages of parquet include low resistance to moisture, difficulty in installation, ability to absorb odors and loss of color upon direct exposure. sun rays(burnout).

Laminate

This type of flooring is made from several layers of material and covered with plastic film. It consists of several layers: the bottom one is made from moisture-resistant paper additionally impregnated with resins or from thin plastic (necessary to give the structure stability and rigidity), the middle one is fibreboard or particle board, the top one is a high-strength non-electrified film (can imitate stone, wood , ceramic tiles, metal and plain-painted surfaces). Externally, the laminate consists of panels about 1 meter long and 20 cm wide.

Advantages of laminate

• Convenience and ease of installation (the tongue-and-groove system allows you to install it yourself without the involvement of qualified specialists).
• Abrasion resistance.
• Environmental safety (can be used in areas where children and allergy sufferers live).
• Resistant to damage (not afraid of massive furniture, animal claws, heels, etc.).
• Resistance to ultraviolet rays.
• Affordable price.
• Hygiene.
• Possibility of laying on a “warm floor” system.
• Able to withstand high temperatures.
• Protected from moisture.

The disadvantages of the coating include high noise (requires installation of a soundproofing pad), and cannot be repaired or restored.

Choosing a laminate depending on the class of use

21 – residential premises with a light load level;

22 – living rooms with an average load level;

23 – premises with a high degree of load, intended for human habitation;

31-33 – public premises with different levels of traffic;

34 – premises public type With high level loads (airports, train stations, etc.).

What is the difference between laminate and parquet?

There is no clear answer to this question. Floor coverings should be selected depending on the specific situation. Criterias of choice:

• Appearance. The beauty of natural wood cannot be compared with anything, but in creating modern interiors Imitation of stone, tile, and metal, which laminate can provide, is increasingly being used.

• Purpose of the premises. For areas with high traffic, it is better to choose artificial turf.

In terms of impact resistance, laminate is 1.5 times higher than parquet boards. In addition, do not forget its high abrasion resistance. However, in solid interiors, natural boards will look more refined and noble.

• Life time. The lifespan of any floor covering depends on proper care. On average, the service life of parquet is 35 years, laminate will last no more than 25 years.
• Thermal conductivity. Wood will undoubtedly retain heat better. However, if you still decide to use laminate, you can effectively solve the problem using the “warm floor” system.
• Soundproofing. Wood will provide the proper level of thermal insulation. Comparing the difference between parquet and laminate, it is worth noting that the latter option is much noisier. When installing it, additional costs will be required for a soundproofing substrate.

• Atmosphere in the house. If there is no efficient system ventilation, in summer time The humidity level will be increased, and in winter the air, on the contrary, will be too dry. All this will negatively affect appearance parquet board. Under such conditions, it will “swell” and then dry out, as a result of which cracks and cracks may appear. You can solve the problem either by choosing a laminate, or by installing quality system ventilation.
• Price. If you want to save money, give preference artificial material, however, if you wish to purchase durable coating, which can be restored over time - choose parquet.
• Features of operation. Laminate is resistant to moisture, while parquet is afraid of it and requires the use of special care products.

Return