Used to fencing local area fences around the entire house. The fence not only serves as protection from strangers or animals, but also has decorative value.
Fences in front apartment buildings also became popular among urban residents. This gives the yards comfort and safety from random unfriendly passers-by or rowdy companies; it is safer for children to play in fenced yards and parents can worry less about them.
The choice is yours. Erecting a fence near a house is a fairly easy and low-cost process, and if you do not violate the laws, you can easily build a fence on your own.
For what reasons do residents decide to install a fence around apartment buildings?
- Limit access for parking of unauthorized cars in the yard (especially if they park on the lawn or interfere with pedestrians)
- Secure the yard from stray animals and people
- Restrict the passage of other cars through the yard
To ensure the legality of installing a fence around apartment building it is necessary to coordinate the project with the residents of the house, as well as with some city services:
- State Inspectorate architecture and construction supervision;
- Main Directorate of the Ministry of Emergency Situations in the region;
- Gor. police department;
- Gor. emergency room.
Do not forget that when installing a fence around an apartment building, the fence should not interfere with the passage of an ambulance or fire truck in case of emergency. If the fence design is not agreed upon, the fence may be demolished in whole or in part.
Fences can either completely restrict access to the courtyard of the house, or partially block access to lawns, entrances, playgrounds and so on.
There are several types of fences around an apartment building
Each of them determines how much access to the yard will be blocked.
Each type of fence has its pros and cons, but which one is better?
If we compare fences in terms of strength, then, without a doubt, the palm goes to monolithic stone fences, or reinforced concrete ones.
Average strength of fences made of iron bars and sheets. But when choosing them, you should always remember that precipitation and humidity can damage the structure. Wooden fences and metal mesh have the lowest strength indicators. Remember, structures that can be assembled and disassembled are always more vulnerable in strength than those that are fixed once and for all.
Also, when deciding on the type of fence, it is necessary to take into account its service life. Here again we would recommend brick, or - their service life reaches up to 40 years. The service life of the metal mesh is no more than 20 years. An iron lattice will last 15 years, and a board fence up to 10 years. As we can see, brick and stone structures are still in the lead.
However, stone and brick fences will cost more than all other options. And the price, whatever one may say, the most important condition. If you start from it, then you should pay attention to fences made of iron bars and polymer materials. The cheapest option, of course, is a wooden fence.
In addition, of course, one cannot ignore the appearance of the future fence, because everyone wants the fence to not only separate the territory from the street, but also please the eye. Here you can advise various combinations- If support pillars made of one material, and the spans between them are made of another - this will look very original and aesthetically pleasing.
Especially if the spans are somehow corrugated, wicker, decorated with some decorative elements, and so on.
A steel mesh is unlikely to create a sense of aesthetics; spans of various gratings and a forged fence, which can combine any patterns that your imagination and money have enough of, look best.
A fence is an integral functional element of private property. It marks the boundaries land plot, protects its territory and the buildings located on it from prying eyes, criminals and unauthorized entry. A fence is the enclosure of a house, a kind of continuation of it. external walls. Therefore, it also performs important decorative functions, being the “face”, “calling card” of the property.
The construction of a fence requires a special approach, because it affects issues of land demarcation and the interests of people living or conducting business in the neighborhood. Before you fence your house, you need to decide on its future appearance, design, dimensions, height, taking into account the current regulations of the law. How to do it correctly, how to build the maximum suitable for home and a fence that does not violate the rights of other citizens is the subject of this material.
Focusing on the letter of the law: what kind of fence can be built
General questions regarding what the fence should be like, how to make a fence between properties and on separate area, are regulated by legislative acts and SNiPs ( building codes and rules). These include:
- The federal law No. 66-F3;
- SNiP 30-02-97 “Planning and development of territories of gardening associations of citizens, buildings and structures”;
- SNiP 31-02-2001 “Single-apartment residential houses”;
- SP 30-102-99 “Planning and development of low-rise housing construction areas”;
- SN 441-72 “Guidelines for the design of fencing of sites and areas of enterprises of buildings and structures.”
According to these regulatory documents“the site should provide necessary measures for protection against unauthorized intrusion." And one of the main measures should be the construction of a fence for a private house, that is, a fence.
At what distance can a fence be erected? Current SNiPs determine that:
- the distance between the house and the fence must be at least three meters;
- the distance between domestic and non-residential buildings and the fence is at least four meters;
- the distance between the trees planted along the border of the site and the fence is at least two meters;
- the distance between low-growing plants and the fence is one meter.
These standards are advisory nature and may vary depending on the size of the land plot, the location of the house relative to the boundaries of the property. The height and transparency of the fence are regulated more clearly by law. The standards defining these characteristics of fencing are mandatory.
How high can a fence be installed? The height of the fence of a private house should be 1.5-2.5 meters and depends on the number of storeys of the house, as well as the placement of the fence relative to neighboring areas. If a residential building consists of several floors, then the height of its fence may exceed the specified parameters. A fence for a cottage or a two- or three-story mansion may be built with a height of three or more meters, subject to agreement with the authorities local government and neighbors.
How high should the fence between neighbors be? The height of the fence between neighboring plots and households should not exceed 1.5 meters.
What type of fence can be built based on transparency? Fence elements that are installed at the borders with neighboring areas must be mesh or lattice, that is, translucent. Elements that are installed on the boundaries between a home and a road, forest, planting, public facility, as well as the fence in front of the house can be solid and opaque.
Compliance with the standards prescribed in SNiPs will allow you to quickly navigate the diversity possible options installing fences, avoiding conflicts with government officials and owners of neighboring properties.
Fence options for a private home
What types of fences are there? The most diverse in design, material of manufacture, type of installation. Below we provide their conditional classification, list and brief description species.
Manufacturing materials. Fences and fences for the house are made from:
- timber lumber (picket fence, boards, picket fence, wattle fence, wooden panels, veneer);
Brick;
- stone – artificial and natural;
Concrete, reinforced concrete and concrete blocks;
- metal mesh (chain-link mesh);
Iron grating;
- forged elements;
Corrugated sheets (profiled steel sheets);
- polymers.
To create a more aesthetic design, these materials are combined with each other, constructing supports and pillars from concrete, stone or brick, and fence walls from metal, wood, ceramic or polymer materials.
A separate type of fencing is the so-called “living” fence for a private home. They are arranged by planting special trees and bushes, which, growing, fit tightly to each other and form a continuous fence. A living fence around the house has the advantage of decorative function and practically does not protect the area from penetration, therefore in pure form rarely used. More often it is combined with wooden and stone fences.
Fencing structures. Fence for country house may have a monolithic, stationary or collapsible, portable structure. Monolithic is built from brick, stone, concrete. It cannot be disassembled and transported to another location. Design prefabricated type settles out of metal sheets s, mesh and lattice materials, wood, polymers. Such a fence near the house can be dismantled, disassembled into individual components and transported.
Mounting and installation methods. The fence near the house is installed and arranged by:
- masonry work, if it is made of brick and stone (monolithic masonry fences);
- welding work, if it is made of metal elements (welded fences);
- drilling and driving work, if it is carried out from piles, palisades, steel pipes and stakes (bored and driven fences);
- installation work on the ground, assembly, if it is made of concrete blocks and corrugated sheets (prefabricated fencing);
- digging work, if its walls are made of lumber, wooden stakes, boards or its pillars have a shallow depth (dig-in fencing).
A “living” hedge is planted in the ground.
Current trends in fence design
Fences differ from each other not only in the characteristics listed above. Distinctive features for them are stylistic design and design. Modern fences build in classical, romantic, Victorian, castle, Mediterranean styles. Modern and country styles are very popular today.
The design of the fence of a private house is determined by the architectural design of the buildings and. Today, the dominant trend in it is a harmonious combination of texture, colors and the nature of materials, proportionality of forms. Largely beautiful fences for the house - these are fences in the same tone or slightly lighter or darker than them. They do not stand out in brightness and do not dominate the overall color scheme, but emphasize, complement style and.
Which fence is better to install?
All types of fences have their advantages and disadvantages, are characterized by varying degrees of strength, a certain service life, and differ from each other in cost and aesthetic appeal. Which fence is better? How to choose a fence from the options on the market? To answer these questions, let's compare fences.
1. Strength of fences. When deciding which fence to build, you should remember that the most durable, resistant to shock loads and the influence of factors environment, are monolithic fences made of stone, brick and reinforced concrete. They are difficult to damage or break. Fences made of metal sheets and gratings have average strength characteristics. They are adversely affected by precipitation and moisture, which can cause corrosion. Low strength indicators for fences made of wooden planks and steel mesh. When thinking about what kind of fence to make, take into account the fact that prefabricated structures are more vulnerable to mechanical stress.
2. Service life and durability. When deciding which fence to install on your site, you need to take into account the service life of the materials from which it will be made. A natural stone, brick, concrete, forged elements, modern polymer materials can be used for 20 to 40 years or more. Corrugated sheeting, metal grid- about 20 years, iron gratings - 15 years, lumber, subject to timely and regular painting - from 5 (plank fence) to 10 (picket fence) years.
3. Design of a fence for a private house. When deciding which fence to choose for your home, a special role is played by the aesthetic appeal and design of the fence. Combined models look better, in which the support pillars are built from one material and the walls from another material. Moreover, walls with corrugation, weaving, trimmed and decorated with decorative elements always look more attractive. If, when choosing among metal fencing There are doubts about what kind of fence to put up: from bars, mesh or forged, you need to know that steel mesh looks “cheap” and simple, more suitable for demarcating garden and summer cottages. To construct a fence for a private house, it is better to use bars and forged fences. The latter look very stylish, solid and presentable.
4. Price range. The determining factor in selecting a fence is its cost. It consists of material costs for purchase and delivery necessary materials, to pay for construction and installation work, depends on the thickness and height of the future fence. When deciding which fence to choose, you should take this into account. The most expensive are stone, brick and wrought iron fences. Their price varies from one to three thousand rubles per 1 m². Fences made of iron bars, polymer materials, or wooden palisades are cheaper. From five hundred rubles to one thousand. Most cheap option fences - fences made of picket fences, boards and chain-link mesh. Their price is three hundred to five hundred rubles per 1 m².
The construction of a private house fence requires utmost care at all stages of construction. And the first of them is the stage of design, selection, decision making. At this stage, it is important to decide where and what kind of fence to install, what its dimensions will be. When giving preference to one option or another, remember that it must equally comply with both your personal tastes and the norms of current legislation. Successful and beautiful decisions!
It’s not difficult to come up with a fence design; it’s more difficult to realize the idea of how to do exactly what you want. But when you also want to make money from it, you need to evaluate the attractiveness of the consumable from the very beginning. After all, the overall structure is often assembled from everything that lies idle or is sold for pennies.
From scrap materials
Now, precisely on the territory of the Russian Federation and the CIS countries, here is what you can choose from:
- Pallets;
- Used slate;
- Plastic (various containers);
- Production network;
- Cutting from a sawmill (the most budget-friendly rural option);
- Shrub branches (collected with your own hands, if available near the construction site);
- (for a fence or shed, cheaper option No);
- Disassembled wooden barrels(rare case, but sometimes in production workshops are forced to sell already broken barrels made of strong wood at their own expense);
- Scrap metal (if you have transport, you can visit retail outlets and collect poles, crossbars and even some decor for handmade work by weight);
- Profiled sheet. The most inexpensive;
- Concrete, cement and decorative.
How to make a cheap fence out of all this? Let's look at it in detail.
Designer novelties
Beautiful photos with original ideas: 
Simple design layout. In the photo - a homemade picket fence made of wire, hazel, willow. For a simple fence made of branches with your own hands, you don’t even need to nail anything, just make turns between the supporting parts, and the low fence will be ready very soon. It's a pity that such designs don't last very long. strong winds and precipitation.
Garden option decorative fence in a private house, assembled on its own. And the more leftover paint is used in this option, the brighter the garden itself will look. Boards can also be selected from pallets to create a simple decorative element. 
Worth noticing! Such a garden fence is also an impromptu bird feeder and waterer. Very original and inexpensive.
Brick, cement and glass. American novelty. The materials are not cheap and readily available, but it looks great. Unfortunately, such a design most likely will not last very long due to the intense interest. There will be someone who cannot repeat this. 
Copper or other metal at work. Of course, the element is not for everybody. And there is a lot of welding work. But if you make it, for example, from iron beds from past eras, it will be original, free and forever. 
Plastic. Even greenhouses have been made from containers for a long time. And they don’t forget about fences. Preferably, of course, from empty containers make small pieces smooth material, which is then sheathed on buildings or fences. But the above method will also work, just prepare a strong frame in advance. 
Euro pallet. Suitable for everything: firewood, building a shed and a fence. Interestingly, the technology for creating the pallets themselves has a drying stage. It turns out that pallets from the warehouse are ideal construction material for inexpensive fence. And often unloading pallets are sold simply by weight. There should be no knots or defects on small boards. 
There is no need to disassemble the pallets to build the fence. The most correct thing to do is as in the photo above - set and secure each of them in turn.
Branches, tree and croaker
Very inexpensive, example in the photo: 
It couldn’t be simpler - they insert or hammer in something for support, and then weave it the way your heart desires. Everything that lies under our feet goes to work. Even dry, crooked and heavy oak branches can be the completion of the composition.
Below is a photo of a fence. From a thin branch Such a design, of course, is not particularly durable. But you can secure a ready-made homemade fence with a mesh over the entire area. 
Like this ( next photo) much stronger, more economical and more beautiful. Livestock, forest pests or abandoned dogs will not disturb your territorial space. Moreover, the mesh can be installed not very finely, and it is enough to be one meter from the ground. Above this, such protection is no longer needed.
Mesh combined with wooden frame, carried out according to the right technology(cone-shaped wood, pillars treated with bitumen). Modest, not particularly expensive and reliable. There is no point in sinning with wood, because a fence made of absolutely any material will not last forever. And even monolithic structures are destroyed by atmospheric changes.
Carved grace. This is a small work of art. Although earlier, when most of the population of our country lived on private lands, there were carved elements in every yard. This had several meanings: wealth, neatness, skill and respect for tradition. 
Below - garden fence made from pallets, treated with protective compounds. 
fence board goes together very nicely With concrete base and a pillar.
By the way, the “fence board” comes in several grades (grade 1-3). If there is a lot of crooked wood at the sawmill, then grade 3 fence boards will accumulate in cubic meters. Externally, of course, there are differences, but this is the same wood that is used in construction. It’s more of a hassle with her, but for such low price this is forgiven her. And if the 1st grade costs from 3 thousand per 1 cubic meter, the 3rd grade will cost 1.5-1.8.
It’s also interesting that cheap lumber is not bought quickly, so it’s easy to find dried, inexpensive fence boards in warehouses or yards.
Original wood processing
Using Japanese technology now you can burn fence boards, giving brown tint. Similar processing for natural material only needed once. Moreover thin layer Burnt wood is resistant to dampness, and natural processing can only be replaced with expensive paint, the service life of which leaves much to be desired. Burn several dozen boards with oxygen or blowtorch convenient, practical and original.
Slate, corrugated sheets, concrete and mesh
If you take on new slate, it would be better to order exactly flat version, designed for 1 span. Such material is easy to replace if it breaks, and it looks discreet, thorough, and more solid. 
Used slate often with a wave. On front part it is rarely used, except for visors. However, the back side of the site, closed from the eyes of everyone and everything, also needs fencing. This is where they find a use for the old slate from their grandfather’s house or barn.
Interesting fact! Slate, produced in the 70-80s of the 20th century, is very fragile, but durable. If no cracks are created during transportation and installation, then it will remain in the fence for decades.
Classic rules for working with your own hands on corrugated sheets and metal frames. As shown in the picture, for high fence(above 2 meters) it is more correct to make 3 logs. Well, the span is no more than 2.5 meters. 
Patterned grids. Long and painstaking work. Must be carried out according to a project or pattern. Of course, you will have to work hard, but you can sell such works. Or hire a designer if there is interest in your ideas. 
Cheap, beautiful and original. You can use everything in decorative elements: from forks up car hubs
. And it doesn’t matter how it all will look in the overall picture, because different elements made of iron or other material cannot be assembled unattractively into one structure. 
Profiled sheet or corrugated sheet on wooden frame . An option for those who do not have welding skills. It is better to make the frame itself more stable, although sheets placed horizontally will give the necessary rigidity. It is advisable to treat the wood protective equipment based on drying oil.
Concrete or brick fences. There are a lot of shades here, decorative elements and, accordingly, expenses. It is more profitable to make only the base from stone, placing it in the center of each span wood, forging, sheets of flooring or even factory plastic.
Estimated cost
Let's look at the example of a standard 6 acres of dacha plot:
| Type of fence | Materials | Quantity of materials | Cost per unit, rub. | Amounts, rub. |
| Wooden fence with concrete base | Cement (concrete); | 11 cubic meters; | 3 thousand; | 33 thousand |
| pillars (logs); | From 50 pieces; | 450; | 22 thousand | |
| logs (timber); | 40 pieces; | 150; | 6 thousand | |
| fence board (grade 2-3). | 200-250 pieces. | 60. | 15 thousand | |
| Result: 76 thousand for building materials. | ||||
| Mesh with concrete base | Concrete; | 11 cubic meters; | 3 thousand; | 33 thousand |
| Pipes for the frame; | 89Х40; | 1500; | 78 thousand | |
| Wooden logs; | 50 pieces. 200-250 pieces; |
108; | 3.7 thousand | |
| Net. | 170 square meters. | 60. | 9.4 thousand | |
| Result: material without delivery 124 thousand. | ||||
These are prices for the central region. And if we count the turnkey supply of the above materials, then we need to add up to 50 thousand for labor and delivery.
Results
Fences made of stone, brick and decorative components cost twice as much as fences made of mesh or wood.
It’s easy to guess that it’s most profitable to do what you’ve planned with your own hands, using the same Euro pallet or used pallet. After all, when high-quality installation they look much more original. The price of the work is cheap; the material itself can be ordered from 100 rubles per piece. 1 element is a whole meter of almost assembled fence. Decide for yourself what is best for a regular fence.
Video instructions
About how to do inexpensive fence, says Ivan Galkin.
Complex but cheap fence
Building your own home has always been quite an expensive undertaking. That is why it arose a large number of anecdotes about how spouses are finishing their house. Most of the money is usually spent on capital construction, therefore, many people prefer to save on finishing and beautifying the site. That is why many people choose an inexpensive fence at the first stage, which can perform its direct functions and will not cost exorbitant amounts of money. The easiest way to save money is to make your own fencing. With today's abundance of materials on the market, this will not be a particular problem.
Why should there be a fence on the site?
The opinion that your plot can stand for a year or two without a fence is wrong. performs not only a decorative function, but also hides what is happening on the site from prying eyes, and also protects the area around the house from thieves and ill-wishers. Once the fence is installed, you won't have to bring chairs or hoses into the house every night to prevent them from being stolen.
There are several requirements for fences. Such a design should be moderately strong and reliable - to a large extent this depends on the quality of installation of the pillars and the attachment of the main finishing material to them. In addition, the issue of aesthetics of the fence is important - you are unlikely to want to see a gray self-leveling concrete fence on your site, which Soviet time fenced industrial enterprises. When self-installation the fence is worth considering and ease of installation, since without certain technical skills complex designs it will not be possible to collect.
What material should I use to build the fence?
Do cheap fence you can do it yourself using the following materials: wood, corrugated sheets, PVC profiles and chain-link mesh. If we take the cost of the structure as the main criterion, then we should focus on the last option. However, all other materials ensure secrecy of what is happening on local area, but the chain-link mesh serves more quickly decorative fencing– through it you can calmly monitor what is happening on the other side of the fence.
First you need to decide which of these materials will be used during construction, and only then consider technological nuances erection of fencing. An estimate for the fence is prepared after selecting materials, calculating the required number of posts, partitions, fastening materials and everything else that will be required during construction.
Wooden fence: ease of processing and structural strength
Example wooden fence
Available in stores today huge selection wood for building fences. This material has competitive advantages over others, which is why it is the most sought after in the market. Among these advantages:
- low final cost, since such fences in most cases are made entirely of wood;
- the ability to choose any color and shade by using regular paints during final finishing;
- possibility of creating as small decorative designs, and high and impenetrable fences.
Wood also has obvious disadvantages, which is why many choose fences made of corrugated sheets or PVC sheets. Due to the nature of the material, which begins to dry out when exposed to sun rays and get wet when exposed to moisture (this problem is relevant even for painted fences, since the paint begins to peel off over time), the service life of such a fence will greatly depend on its care. It is recommended to repaint wooden fences every couple of years to maximize their lifespan.
What is needed to build a wooden fence?
In order to build a cheap wooden fence with your own hands, you will need finishing material(picket fences of various sizes), transverse partitions and support posts (to save money, many use wooden structures, which must be carefully treated before immersion in the ground with an anti-rotting agent), marking pegs, tension ropes. Depending on the method of installing the pillars, you will need cement and sand (if the pillar is filled with concrete, this option will be the strongest and most reliable) or ordinary stones (the hole under the pillar is filled with large cobblestones that reliably hold the pillar in one position).
To prepare holes for installing poles, you will need a drill and a shovel. The easiest way to fasten cross boards to posts is with screws; they can also be used to screw a picket fence. More economical option- nails, but they hold the boards worse (they can become loose over time), and if it is necessary to replace part of the fence, they create a lot of problems.
Wood fence construction process
Because in the question “Which fence will be the cheapest?” Wood as a material is confidently in the lead, then we will consider the issue of construction in more detail. They begin to build such fences by marking the area and determining the location of the entrance gate and gate. To do this, you will need pegs and tension ropes, which we wrote about above. Accurate marking is the key to the stability of the future structure.
Afterwards, a hole is prepared under each peg for support pillars. Its depth and dimensions will depend on the method of installing these pillars, but a separate article can be written about this. In most cases, it is recommended to bury the post 25% of its length in the ground. To ensure that the structure is reliable and the pillars do not move, you need to immediately install spacers, and only then fill the hole with concrete or fill it with stones. When the composition has hardened (ideally, this requires a day - during this time the concrete will set and the post can no longer be loosened), transverse boards are installed, on which the picket fence is vertically fixed.
The last stage of construction is impregnation of the fence special mixtures, giving it moisture resistance, and painting.
Video instruction
Chain-link fence: simple and durable
It is the cheapest option for a fence, which can be installed even cheaper and faster than a wooden one. Such a fence will be completely resistant to the “delights” of the weather, moderately strong and reliable (meaning its stability after several years of operation), and also extremely easy to install.
To build such a fence, you will need the same support posts (usually metal), cement and sand for pouring them, a shovel and auger for preparing holes, a mesh of the required length and fasteners for its installation (wooden slings or a metal corner), twine and stakes for marking . It is recommended to opt for galvanized mesh, which costs a little more than the most common one, but does not require painting and is not afraid of corrosion. There is also a more expensive option - a mesh with vinyl covering, completely protecting the metal from moisture.
At the initial stage, everything is done in exactly the same way as for a wooden fence: posts are marked, holes are made, posts are installed and filled with concrete or covered with stones. Then fasteners for the mesh are mounted between the posts: these can be steel angles, boards or a rigid cable. Only after this the mesh is attached on one side to the first pillar and stretched around the remaining pillars. It is extremely important to avoid sagging of the mesh at this stage. There is another option - a sectional fence. In this case, the mesh is cut into pieces, which are fastened between adjacent two pillars using metal corners(in a kind of frame). This is simpler and more reliable, but it also costs homeowners more.
Video instruction
Corrugated sheeting: more reliable and faster than wood
Corrugated fence
They have gained enormous popularity in the 21st century. Today you can find dozens of varieties of this material in markets and hardware stores. This is why corrugated sheeting is in demand: prices for the cheapest types make it a direct competitor to wood, but the most expensive varieties can easily replace full-fledged brick fences.
The set of things necessary for installation here is exactly the same as in the case of a chain-link mesh. You will need poles, a drill, a shovel and cement mortar, jumpers (logs made of wood or metal) on which the corrugated sheet will be attached, screws for fastening and the corrugated sheet itself. The construction mechanism is exactly the same up to the stage. Afterwards it is recommended to paint everything metal elements to protect them from corrosion.
Video instruction
Plastic fence - a compromise between corrugated sheeting and chain-link mesh
Many consider such fences as a compromise between a cheap and “transparent” chain-link mesh and a more expensive and reliable corrugated sheet. A polycarbonate fence is also classified as budget decisions, although it is the most expensive of the economical fences. Such structures have several advantages: they do not darken the area, since they partially transmit light, they are no more difficult to install than fences made from corrugated sheets, and they look simply wonderful. The only drawback of this design is the plastic itself, which can easily burst with a slight blow or accidentally hit by a rake, for example.
Set of tools and Supplies, and the installation procedure here is exactly the same as for a fence made of corrugated sheets. The only difference is in the number of lags, which will directly depend on the width plastic sheet used in construction. Usually at least three of them are required: two are attached at the top and bottom of the fence, one in the middle. If narrow polycarbonate is used to build a fence, then it may be necessary to install a fourth log - such a fence will look especially beautiful, since it will be divided into 3 blocks in height.
Summing up
Progress does not stand still, and if previously you had to choose a cheap fence option only between a wooden one and a chain-link fence, today such wonderful materials as corrugated sheeting and polycarbonate have appeared. They are easier to install than a wooden fence, and due to the large size of the fragments of such a fence, this entire procedure takes much less time.