What to make paths in the garden with your own hands. Do-it-yourself paths in the country: consider the work process, how to make a path

The arrangement and layout of the site involves the creation of paths. Moreover, the requirements for them are quite serious: they must be reliable, comfortable, functional, beautiful and, very preferably, inexpensive. About how to do garden paths We’ll talk about how to do it yourself at low cost in this article.

What to make paths from

The path surface can be hard or loose. To create a hard coating, the following materials are used:

Concrete. Concrete walkways are more than just plain gray tape. In addition, there are dyes and you can decorate it if desired. There are also forms for filling immediately on site. It turns out homemade paving slabs. Another option is to pour small concrete slabs yourself the right size, then put them on the bedding. See photos for design examples.
And everyone in the household has forms for such a path - cut water bottles into cylinders, place them as needed and fill them with solution: beautiful and cheap

Large pebbles as backfill and colored concrete slabs

Another option for laying homemade concrete slabs down the garden path

And this is a concrete path with expansion joints. If you look closely, you can see that there are stripes across it. This is to ensure that the wet surface is non-slip.

Another ready-made form for homemade paving slabs

Looks attractive due to the border and non-linear shape

A simple concrete strip can be decorated to your liking

This is how they pave a path in a country house or near a house using ready-made forms into which concrete mortar is poured.
Flagstone. This is a natural stone that has been cut into plates. It is laid on a prepared base (more on this later), the gaps are filled with backfill. It turns out beautiful, reliable, non-slip. It’s not for nothing that landscape designers love flagstone paths so much.

Backfill is one of the important elements, shaping the appearance

In this form, the flagstone path does not break up the lawn, and it is comfortable to walk

The color of the stone can be any

Quite nice paths made of old brick. And if you do the backfill on the sides and in the seams, it will be absolutely beautiful

These are two types of bricks - ceramic and crushed granite

A clinker brick path is beautiful, to say the least... but maybe too beautiful for a garden?
Tree. Such a seemingly unsuitable material, but correct processing it can serve for a long time. Moreover, many hand-made wooden paths can be classified as low-cost. For example, they came up with the idea of using stumps and tree cuts as borders or coverings. They also make flooring from well-treated boards - better than a terrace, but if not, an old floor will do.

Building a tree can become an excellent path

This type of wooden pavement for a summer residence

Properly treated wood can last for several years.

Combination with pebbles - comfortable to walk

Gorgeous path for a plot near the house

And this is how to make a path from boards
Plastic. There are tiles for garden paths made of plastic - polyethylene or polypropylene. She has square shape and a system of locks that are attached to one another. It can be laid directly on top of the lawn or previously trodden paths in the country house or on a plot of land. This is an option - fast and cheap. It can definitely be called “Low Cost”. It is better, of course, to make the filling according to the rules from crushed stone and sand, and lay plastic elements on top. It's a little longer and more expensive. There is also an immodest, but very nice option plastic tiles for paths. There is also “garden parquet”. These are slabs or boards made of wood-polymer composite - WPC (they are in the photo, they look exactly like parquet). This material appeared relatively recently. It looks and feels like wood, but is essentially a mixture of wood flour and polymer. These are very beautiful coatings, but their cost is by no means modest. Although not fabulous.

The good thing about a plastic path in a country house or on a plot is that it can be made in a few minutes

Another type of plastic tiles for paths

This is garden parquet. Gorgeous, but overpriced

And another option for polymer tiles for garden droshky

This is a bunch of plastic garden tiles
Pebbles. These are rounded natural stones that can be found on the banks of rivers or lakes. Flatter stones are more suitable for making paths. There are different shades of gray, black, white, and sometimes you can find burgundy. These stones, laid close to each other, create amazingly beautiful mosaic paths. But this is an activity for the diligent and persistent. Those who lack patience can find large flat boulders or large pebbles and place them in the sand. It's not as luxurious, but no less reliable. You can do the same with granite or other similar stones. It is important that at least one edge is relatively flat. You put this flat part up, and bury the rest. The work is not easy, but you can not only walk on the path, but also drive.

Different types of pebble paths

Large pebbles do not require as much time for installation

Beautiful pebble paths in the garden.

Large natural stones can be used to pave good corners
Available materials. Country paths are made from old tires and bottles.

Garden paths, elegantly winding among the trees, add to the area well-groomed and complete. And it is not at all necessary to buy paving slabs or hire a designer and builders for their arrangement. You can improve the paths in the garden yourself, putting your soul into their creation, and in return you will receive a durable, well-maintained coating that can delight you long years. We’ll tell you in more detail how to make a garden path from a variety of materials with your own hands.

Types of garden paths

Garden paths can be classified according to many criteria, ranging from the material of manufacture, size and method of arrangement, to design and compliance with a certain style. Let's consider which garden paths can be arranged on your site with low costs for their production.

Garden path made using a plastic mold

Improving garden paths with plastic molds - relatively new way, which, thanks to its simplicity, has found many fans among owners of summer cottages.

Proof of this are numerous photos from specialized forums where you can see just such garden paths.

Advantages This method is not only simple, but also low cost and speed of production, because making garden paths using molds is essentially ordinary concreting.

The cheapness of this method is due to the use of one form, which is sufficient for uninterrupted operation. Of course, the strength of tiles made in this way is inferior to products made by vibration casting in a factory, but for a path in the country they are one of the best options.

Garden path made of paving slabs

The same applies for garden paths. tile, which is laid on sidewalks. The undeniable advantage of this material is strength. Tiles laid in the form of a path in the country will serve you for many years without loss of appearance, and if some elements of the path are damaged under the influence external factors, they can be easily replaced. IN flaws tile covering we write down labor intensity And high cost . And what do you want? Durability doesn't come for free.

Stone garden path

Very often, the stone left over from the construction of a house is used to improve the paths. In this case, we can assume that the price of such a garden path is equal to the cost of your own labor. We won’t talk about the durability of the stone; paths of this type have been known since ancient times. The disadvantages, as in the case of tiles, are labor intensity.

Laying a stone correctly is not a task for the weak, but it will more than pay off in the result. Do-it-yourself stone paths will give the appearance of your garden real nobility and the appearance of unshakable durability, and they will remain in their original form for your descendants.

Garden path made of chocks and wood

If country house built of logs, then your choice is a path made by yourself from wood. This is one of the cheapest options, very easy to repeat, but, nevertheless, one of the most impressive against the backdrop of trees in the garden. Unfortunately, the service life of such paths is limited due to the fragility of the material, so only the hardest types of wood will have to be used.

Garden path made of bulk materials

If you want to build garden paths with your own hands at low cost, then this method is what you need. It is enough to dig a trench of the required width and fill it up suitable material, ranging from pebbles and screenings to crushed stone or marble chips. You can even lay pieces of marble or concrete slabs in a chaotic order, the main thing is to align their upper surface level and fill the gaps between them. Such garden paths are not suitable for heavy loads, but they can provide the necessary cleanliness and excellent appearance of your garden.

Instructions for creating garden paths in photographs

Garden path using a DIY mold. Step-by-step instruction

To start arranging garden paths using a plastic mold with your own hands, look at photos of such stencils and buy the one you like the most.

Pay attention to the height of the forms and “stones” - they can vary widely.

A lot has been written about how to make paths in your dacha with your own hands. We suggest using the following instructions.

Choosing a place for a garden path and mark it out with our own hands. To do this, we hammer in pegs at all the bends of the path, and then tie them with cord around the entire perimeter. The cord is immediately leveled, taking into account the required height of the path above the ground. A water level can make this task a lot easier.

If the soil on your site is soft, then you need to dig a trench 10-12 cm deep, fill it halfway with sand, after which you need to spill everything with water and compact it. If the soil is sufficiently strong, you can do without a trench, but it is necessary to make a sand backfill followed by compaction.

If you plan to use the paths in your dacha for car passage, you should dig a trench with your own hands, fill it with a sand-gravel mixture, and then lay a reinforcing mesh of steel rod on top of it.

Preparing the solution . To do this, mix grade 400 cement, sand and crushed stone in a ratio of 1:3:4. If you plan to use coloring and plasticizing additives, then add them at the rate of 1-3% dye and plasticizer. You can take 4 parts of sand, but make sure that the cement is as fresh as possible and its grade is not lower than 400 .

We begin the production of garden paths by mixing all the components in dry form, after which we add water (if a concrete mixer is used, then half the volume of water is first poured in, and the rest is added during the mixing process).

We begin to prepare the solution Add concrete dye and liquid plasticizer Mix dry Add water with plasticizer and mix again

Let us immediately note that excess water negatively affects the strength of concrete after setting, so the amount of liquid should be no more than that required for high-quality filling of the form. Application plasticizer will significantly facilitate this process, add strength to concrete and reduce cement consumption by up to 15-20%. You can also add fiber fiber to the solution, which will prevent shrinkage cracks on the surface and will increase the abrasion strength of concrete by 100%.

For ease of use of the stencil, we attach handles to it , using special technological holes in the housing. For those who plan to make garden paths at low cost, let us tell you that the mold can be lubricated with automotive “ working out».

Of course, this is not the most perfect option, because the greasy surface of the tiles can only be painted after some time. The use of a soap solution is no less budget-friendly, but even such an environmentally friendly method also has the disadvantage described above.

We lubricate the molds for the garden path with a special lubricant. Lubricating the mold will allow you to easily remove it from the finished product.

Here's the application special lubricant for forms though it will entail additional expenses, but will save you from the need to constantly lubricate the mold for making a garden path with your own hands. A form greased immediately before work will not leave greasy marks, so you can paint such a path immediately after setting.

If the soil you compacted has dried out , then you must definitely spill it with water. Next, guided by the previously stretched cord, and also controlling the level, we install a form for pouring garden paths, which must be slightly pressed into the sand.

Fill the stencil with the prepared solution , avoiding voids in its corners. Using a small tamper, which we use as a vibrating plate, we try to compact the concrete as much as possible, and then level its surface with a spatula. After the 30-50 minutes required for the concrete to pre-set, the form is carefully removed and placed side by side, repeating the process until the finish line.

We begin to gradually fill the form, do not forget that the concrete should not be very liquid Special attention Pay attention to the corners, you need to fill them as much as possible with concrete mortar. Since we used a plasticizer and made the solution thick, after 15-20 minutes you can remove the mold. Here the first slab is ready! Let it harden for a day, after which we begin to actively use it.

To avoid animal prints hand-made garden paths cover plastic film and wait at least 3-4 days before taking a new path and taking a photo as a souvenir. The full load on the concrete product can be given no earlier than after 20 days.

The last stage in the construction of garden paths Do it yourself at low cost by painting and filling the tile joints with river sand.

There are several ways to paint a new path.

The first is to add dye to finishing stage concrete preparation . After this, you can lightly mix the concrete, achieving an uneven color, or thoroughly mix the components to obtain a uniform color.
The second method requires powdering wet surface concrete with dry dye every time after removing the form , however, in this case only the most upper layer, which will wear off over time. Garden paths with stains wiped off precisely after this type of painting can often be seen in photos on the Internet.

DIY paths video tutorial

Garden paths painted with your own hands look very interesting. dye dissolved in soil deep penetration , which allows you to achieve similarity with natural stone at low cost. Stone effect tiles, painted in various colors, will look especially impressive in your garden. And the last piece of advice: after painting, do not forget to treat the surface of the path with a water repellent - it will not allow moisture to penetrate the pores of the concrete, destroying it from the inside.

Pouring a concrete path with your own hands

Monolithic concrete paths laid along a summer cottage are easy to manufacture, durable and visually attractive. Read on to learn how to make concrete garden paths.

Marking the future path , driving pegs along its edges and pulling a cord between them required height. We take into account that optimal thickness filling is from 7 to 10 cm.

Preparing the sand bed . To do this, we dig a trench up to 20 cm deep, level its bottom, install beacons and lay geotextiles, also covering the slopes of the trench with this material. After this, we fill the hole with 2-3 layers of sand with intermediate pouring and compaction of each layer. You can add a layer of fine crushed stone between two adjacent layers of sand. This will enhance the drainage properties of the pillow.

Laying agrofibre Installation of a sand cushion Leveling the sand cushion

Preparing concrete . You can use the recipe from the instructions for filling the molds. If you need a pavement path of increased strength, for example, for driving or parking a car in a country house, then take 1 part of cement (not lower than grade 400), 1.5 parts of sand and 2.5-3 parts of crushed stone or gravel. The ideal volume ratio is 1 part water to 3 parts cement, but to increase the plasticity of the liquid, add a little more. Don't forget what less water will be in the solution, the stronger the concrete coating will be.

Formwork is used for garden paths from wooden boards with a thickness of at least 20 mm. It is better if the width of the boards is equal to the thickness of the fill, otherwise you will have to dig them into the ground. The boards need to be nailed to inside pegs.

Install dividers at even intervals in order to create expansion joints. When making paths at the dacha, dividers can be used from available material. Smooth, narrow strips of drywall, glass, thin boards, scraps of laminate, siding, etc. are suitable for these purposes. In order to remove the spacers after the concrete has set, they must be lubricated with any suitable lubricant.

We carry out reinforcement of the structure to increase its strength. Chain-link mesh, scraps of reinforcement, pipes, etc. are used as reinforcing mesh. Of course, it is best to use a welded reinforcing belt made of rods with a diameter of up to 8 mm, with a cell of 100x100 mm. The reinforcement is placed at half the height of the path, using fragments of bricks or clamps made from the same rods.

Garden paths are poured up to the top edge of the formwork. . Next, using a tamper, we compact the surface until cement milk appears on the surface of the path, and then level it using the rule. Next, cover the path with plastic film and wait at least 5 days before removing the formwork. Full load on concrete can be given no earlier than after 3 weeks.

Decorate the path possible in several ways.

Firstly, the surface can be painted or tiled with marble or ceramic tiles.
Secondly, you can apply a design to it using a shaped spatula, screwdriver or coarse brush.
Thirdly, you can paint the concrete itself at the preparation stage.
Fourthly, gravel or pebbles can be pressed into the wet layer, laying out intricate patterns.

In a word, a garden path made of concrete can be original and attractive, as in numerous videos of popular Internet resources.

DIY garden path made of paving slabs

If you are planning to arrange garden paths with your own hands at low cost, then this method will not suit you. Paving slabs cannot be called a cheap material. On the other hand, such tracks have a lot of advantages and are practically free of disadvantages. Watch a video in which you can lay such a garden path yourself. Not so difficult, right? At first glance, this is true. In fact, in order for the sidewalk path laid at the dacha to please the eye long time, careful preparation of the base and maximum care and precision in work are required. So, how to make a path from paving slabs with your own hands:

Choosing a tile . At the same time, we focus not only on design, but also on its operational features. For example, for tiles on which you plan to drive a car, the ability to withstand increased loads is important.
Stocking up on tools . For work we will need: a trowel, a rubber hammer, a tamper, a level, a cord, pegs, a pipe or I-beam, sand and cement.

Marking future paths . To do this, we hammer in the pegs and pull the cord to the required height.

Preparing the foundation . The successful operation of the track throughout its entire service life will depend on this work, so we approach this stage with the most responsibility. To do this, we level the base as accurately as possible, removing part of the soil on the hills and adding it in the lowlands. As we work, we constantly compact the soil, wetting its surface with water.

We calculate the depth of the base by calculating the height of the tiles plus the height of the sand layer. To the resulting value add a couple of centimeters for shrinkage. As a rule, the depth is 20-30cm. Do not forget to create the necessary slopes for water drainage from the surface.

After leveling the base, we lay geotextiles . It will prevent weeds from growing into the tile joints.

Pour a sand cushion , spill it with water and tamp it down. After this, we level its surface with a profile, relying on pipes or beams installed at the required distance from each other.

Preparing the mixture from 1 part cement and 3 parts sand, which we lay on the base and screed using an I-beam or channel.
We start laying the tiles from the curb in the direction “away from us” . We lay out the initial row clearly along the cord installed along the chamfer. In this case, you can use 1-2mm crosses to form seams of the same thickness. To ensure the required height, sand is added or removed with a trowel, compacting it as you work. At the same time, do not forget to constantly monitor the quality of installation using a level and a mallet. If you need to join the tiles to other buildings, then, if necessary, they can be trimmed with a grinder with a circle installed for working on stone.

After it is laid the last row, fill the seams sand-cement mixture and fill them with water.

A border installed along the edges of the sidewalk will prevent the tiles from moving and maintain the integrity of the structure. During operation, sand can be washed out of the seams with water, so it will be necessary to add it periodically.

Wooden garden path

Many summer residents think about how to make garden paths from wood, because this inexpensive and accessible material is always at hand. In addition, you can use not only classic version in the form of installed cuts, but also to install beautiful and functional tracks in the country, for example, from such improvised material as Euro pallets.

The material for the cuts can be either a purchased log house or fallen trees from the grove located next to the site. A chainsaw will help you make wooden garden paths at low cost; you don’t have to buy it if you can ask a friend for help.

To arrange the path, follow the following instructions:

We mark the place for the path and dig a trench 10-20 cm deep.
We lay waterproofing taking into account covering not only the bottom, but also the slopes.
For drainage, fill the bottom of the trench with crushed stone.
Pour a 10 cm layer of sand as a cushion under the cuts.
We install the cuts, alternating thick logs with thin branches to fill the space as much as possible.
We fill the gaps between the cuts with sand.

You can install the cuts in such a way that their upper part will rise 3-5 cm above the surface. A path of this type will be much less dirty in slush and rain.

In the video you can often see how great a garden path made of wooden boards looks. But material such as Euro pallets is excellent for our purposes, and the cost of such material only includes its delivery to the site. At the same time, pallets are made from durable wood, which, when treated with antiseptics, can last a long time.

To prepare the boards, they are cut into 50 cm pieces, sanded, processed protective agent and painted or varnished. The flooring itself is performed according to the following algorithm:

Logs are made from wooden blocks, which are fastened together with the same bars, using “half-wood” knitting.
Cover the structure with bitumen mastic, which will protect the frame from rotting. The same mastic is used to cover the bottom of the boards.
Lay the boards, leaving a gap of 10-20 mm between them for water drainage.
Additionally, the path is coated with varnish or paint.

When driving nails, try to bury their heads into the wood as deeply as possible. This will allow you to walk along the path barefoot without fear of getting hurt.

Prices for forms and materials

Everything you need for arranging garden paths can be found in the appropriate sections of the store. Leroy Merlin. “Garden paths” and other sections of the catalog contain hundreds of items necessary tools and materials. At the same time, it should be noted that the prices are quite affordable.

Thus, the cost of a mold for a garden path in Leroy is 507 rubles, which, you see, is quite inexpensive, given its reusable use. A concrete mixer, of course, will cost you more - a 120 liter unit costs 5,690 rubles, but it will greatly facilitate concrete work.

Concrete dyes

Dyes for concrete start at 603 rubles. for a 700 g jar, while plasticizers can be purchased for a minimal price - 149 rubles. for a container weighing 600 g. The store’s consultants will be able to answer questions about how to make paths at the dacha with your own hands or tell you about the features of using certain materials. A form for a garden path, purchased from Leroy Merlin, will allow you to save quite a significant amount when arranging paths in your garden.

If you have not yet decided how to make a path in your dacha, look at the gallery of photos located on our website. Interesting solutions using in various ways arrangement of garden paths will help you choose the most best option, make the necessary changes to it and create your own unique design. And maybe soon a photo of your particular site will appear in the first lines of search results.

An elegant path emerging among snow-white pebbles

Today we bring to your attention amazing ideas for decorating garden paths. We will show you the magnificence of options for arrangement and chic landscape design. Here are all the most popular examples, from unique design compositions and stylish geometry, to simple and uncomplicated paths built from waste building materials and other great ideas.

The most popular are the stunning alleys and paths built from natural stone. They themselves can perfectly complement textures and diversify lush greenery, but you can show a little creativity and create magnificent masterpieces with their own original plot, charming contours and rough shapes.

A fairytale path among a riot of decorative plantings

Rectangular rock fragments surrounded by colorful pebbles

Simple but neat path

Stone slabs laid between beautiful flower beds

Even simplicity can look impressive

From large fragments you can combine not only an alley, but also steps

Compositional contrasts

What your imagination is capable of

Beautiful staircase

Unique image

Cozy garden

Laconic landscape design

Fairytale composition

Works made from decorative stone, which was previously given finishing to acquire a certain shape, will look more impressive in the landscape design of the site.

As a rule, such rock fragments are made to order and, depending on your desire, they can have even the most intricate configurations.

You also get the opportunity to individually select this or that stone and better implement this idea together with a designer who will help you correctly formulate your needs.

Elegant decoration

Intriguing compositions from different materials

winding path

Alley for modern garden with minimalist design

Original scenery

The road to a fairy tale

You can focus on non-standard options; winding stone paths will add an interesting twist to your site. And if you choose original garden lighting to complement such a stylish look, you will get an impeccable picture that will be difficult to take your eyes off. You can lay out such a path from almost any material that is available to you.

Charming road through a well-kept lawn

A winding concrete path surrounded by colorful flower beds

Discreet Design

To some, brick may not seem like a very modern material, but if you formulate the image correctly and choose non-standard patterns, you will get a wonderful decor. Moreover, you can combine it with other textures to create a striking contrast.

Intricate motive

Stylish alley

Convenient path through the luxurious gallery

Simple but effective solutions

Paving stones formed into a stylish image

A road along which your walk will be unforgettable

Interesting way of laying

Chic landscape design

For fans of stylish geometry and creative design, you can think about a stunning option that is worthy of royal flower beds. Symphony of natural stone, lawn grass, pebbles or other material can be embodied in gorgeous picture, which will become an artful highlight of your garden.

Playful combination

Worthy decoration

Concrete garden paths also have good potential. You can build such an alley yourself, having basic knowledge in this industry, or entrust all the work to a specialist.

You can choose any method: solid pouring or slabs, and the second method will be more flexible, since you will get not just a solid canvas, but also areas where you can plant between the fragments ornamental plants, which will serve as frames for each piece.

Alley between beautiful flower beds

An impressive composition in an original frame

Paved paths

Adding Interest with Captivating Details

Magnificent steps

Do you want to express your individuality, and in some cases, fit within a modest budget? Then the following examples will pleasantly surprise you.

Unusual, but beautiful path from wooden logs buried in the ground

A creative approach to arranging a path

Even simple pallets will perform the simplest task

A unique pattern, the material for which can be found among our garbage

Passage between flower beds

Having a small pond on your site, you can’t even imagine how effectively you can present this image. Right in the middle of a mini-reservoir in the garden, you can build flower beds with moisture-loving plants and lay a small path out of stones. But you shouldn’t limit yourself to this, because they open up before you ample opportunities, which should not be ignored.

Gorgeous man-made lake

Exotic terrace

Luxurious landscape design

The paths, lined with stones with an uneven structure, have a very charming appearance. They blend perfectly with the entire landscape. To slightly soften their rough appearance, you can plant decorative low-growing plants in the voids between them, which will hide the open ground underneath and create a simply fabulous image.

A tempting option for designing a path

Modern terrace design

Wonderful path

Magic Road

Bring a variety of colors

Visual appeal in every detail

Magnificent landscape with superb scenery

You can build garden paths with your own hands even from scrap materials, you may doubt it, but glass, sand, broken bricks, old tires and other building materials can be a brilliant idea for decorating a stunning path running through your garden.

For a more elaborate project, you will need the help of a designer who will turn you patio or a plot near the house in a fabulous place where you can not only relax, but also fully enjoy the beauty of nature that you created with your own hands.

еQˠ - just add the additions suggested above, and you will mentally find yourself in the south of France.

Arrangement of garden paths is necessary for cleanliness, comfort and convenience on the site. Paths are needed not only for functionality, but also for decoration in landscape design and green areas.

To create paths, it is not necessary to hire specialists; you can carry out the work using your own efforts, while reducing financial costs.

Country path project

Before they begin work on designing garden paths, they begin to plan the site.

When creating a plan, the most passable places are taken into account and marked.
Next, the width of future paths is determined and markings are applied to the area.

Country paths should be easy to use. The thickness and shape can be made in any variant, it depends on individual preferences.

The main point in the arrangement will be the choice of material.. It directly depends on the composition of the soil, climate, and personal wishes.

Advice! When planning a site, the area of the main and auxiliary paths is first determined. Are taken into account important criteria: entrance to the site, outbuildings, watering area, rest area, passage between flower beds.

Material selection

After planning the site, the question arises: is it cheap?

Let's consider the main types of materials that are most often used when arranging country paths.

Tree

Traditional material, harmonizes well with the lawn and flower beds. Wooden paths environmentally friendly, safe. You can easily install them yourself.

Wood is exposed to aggressive environments, so to extend its service life the material is pre-treated chemicals, protecting against moisture penetration and the formation of dampness.

Wooden paths are used only in dry areas.

Natural material is not cheap, so to save money, remnants of saw cuts or bars are used in arranging paths.

Winding paths look good from ordinary stumps. The prepared sections are laid directly on the ground, leaving a small distance between them.

Wooden plank paths look impressive on a green lawn. The edges of the path are trimmed with wooden blocks, or left without decoration at all. Wooden boards if desired, combine with small pebbles.

Such budget paths look no less attractive.

This video explains in detail how to make a garden path from old logs:

Concrete

Concrete paths are easy to make yourself, which will significantly reduce construction costs. Your own work will not be in vain, because such paths will last a long time. Concrete paths are made of any shape and size.

The advantages are:

low cost;
ease of installation;
durability;
resistance to precipitation;
inability to germinate grass.

An interesting option for execution are special shapes that give original look concrete covering. A budget option would be to purchase one plastic mold, with which you can arrange a small area of the path.

Arranging long paths with one shape will turn into a labor-intensive process.

Advice! Absence will help you get away from boring design clear lines. When creating paths, you can use curved lines and rounded bases. This process will be more difficult, but the result will be much more beautiful and interesting. .

Watch a useful video on how to make a concrete path using a plastic mold:

Bulk materials

By using bulk materials you can create attractive and functional paths on summer cottage. The advantages of this type of material include:

low cost;
no need to prepare the foundation for the construction of trails;
possibility of making it yourself;
a wide range of;
the opportunity to implement creative ideas.

The following materials are used as bulk material for arranging paths in the garden: pebbles, crushed stone, gravel, slate.

Natural stones differ in structure, fraction size, and color.

Bulk material combines well with natural stone and wood.

Look at the video, the technology for constructing a garden path from decorative granite screenings with edging with granite paving stones:

Paving slabs

Another type of material for arrangement country paths. Today, paving slabs are especially popular when arranging dacha areas. The high demand for the material is due to its high strength, durability, and aesthetics.

Save on manufacturing sidewalk paths V own garden It will help to carry out independent work.

Each tile has its own size, pattern and color. Select the material according to general design plot. For a beginner, it’s better to avoid complex geometric patterns, but laying out paving slabs evenly on your own is quite possible.

Video on the topic, technology for laying paving slabs:

Natural stone

Stone paths are considered the most durable and durable. They are perfect for areas where increased strength of paths is needed.

Natural stone is laid on sandy base, either to the ground in the form of smooth paths or chaotically disintegrating areas. Natural material combines perfectly with other types of road surface finishes.

You can not only make garden paths from natural stone, but also create landscape designs.

The only negative of this material is the formation of ice on the surface of a stone path in winter period time. The technology for laying natural stone with your own hands is simple and does not require special skills.

Advice! The use of homogeneous materials in the arrangement of the facade of the house and garden paths will add laconicism and harmony to the exterior.

Look interesting video, the process of creating a garden path from ordinary stone:

Making paths with your own hands from scrap materials

Many summer residents are wondering: how to lay out paths without experiencing serious financial losses? For this suitable use scrap materials.

Rubber tire resistant to external natural phenomena, so it is perfect for arranging paths in the garden.

The material can be easily purchased at a tire shop for free.

Car tires are prepared for further installation in place of the future track: the edges are cut off and the straight part is straightened. There is no need to prepare the base; the tire is laid directly on the ground.

This video shows how to make garden paths from old car tires:

You can find a lot in nature useful material, which can become a covering for garden paths. For example, coniferous forest is rich in tree bark.

This natural material looks great in the landscape design of the site, and installing it yourself will not be difficult.

Tree bark is durable and perfectly permeable to moisture. The technology for laying bark is simple - just prepare a trench, pour a layer of sand and fill the space with bark to a height of at least 10 cm.

Advice! When arranging paths, it will not be superfluous to design borders. They will help hide flaws and add completeness to the road design.

Conclusion

In order to do it yourself at the dacha, you do not need knowledge in the field of construction or architecture. The main thing is to follow the advice, choose the right material, and fulfill all the conditions for preparing for work.

The paths in the country between the beds are arranged according to the same principle as indicated above in the article.

Budget options for designing country paths can look very interesting and laconic. With a little effort and imagination, you can create a beautiful garden alley on your site without experiencing large financial losses.

Landscaping a personal plot is not as difficult as it seems at first glance. The least expensive idea would be to lay garden paths. This design will not only give an attractive appearance local area, but will also become a very functional addition. In rainy weather, you won’t have to walk on soggy ground; having a garden path will eliminate such inconveniences. Modern market offers a variety of materials for arrangement personal plot. You just need to make a choice based on your taste preferences and financial capabilities. To save significantly cash no need to ask for help landscape designers, there is no need to look for a team of tilers. It is quite possible to lay garden paths yourself; you just need to know a few subtleties that you may encounter in the process of arranging your local area.

You can lay garden paths yourself

Garden paths are the most budget option beautification of the site

Garden paths can harmoniously decorate a site

Garden paths made of natural stone

Paths decorated with natural stone always look impressive and original. Main advantages natural material is ease of installation, heat resistance and long term operation. The disadvantage is the high price of the coating, massiveness and the need to draw up a sketch before starting work. Natural stone is considered an elite material, and many developers prefer to practically not use it due to high price. But in in this case The price fully justifies the quality. Stone garden paths will last for decades.

Natural stone is mined in quarries and then processed. This means that the material is environmentally friendly and comes in a variety of colors and sizes. Among the methods of paving paths, there are two main methods: by applying a coating to a sand cushion or by spreading the coating directly onto the concrete mixture.

These tracks can last a very long time.

Paths made of natural stone look very beautiful

Laying on a sand bed

It is necessary to dig a trench, the depth of which is determined by the characteristics of the soil. If the soil is light enough, the trench should be no more than half a meter, otherwise no more than 30 cm.
A layer of prepared crushed stone is distributed on the ground, no more than 12 cm.
A sand cushion must be laid on top of the crushed stone.
An ornament made of natural stone is formed on the sand.
If necessary, the seams are sealed with sand.
On last stage the entire surface is treated with water. You need to monitor the amount of moisture, this will help avoid sand being washed out of the joints.
Laying using concrete
As in the first case, a trench is dug and several layers of crushed stone and sand are laid.
The required amount of concrete is poured into the formwork.
You should wait until the solution dries and carefully remove the formwork.
Sand is poured and natural stone is laid on its surface.
The joints are rubbed with sand, after which the garden path is treated with water.

You can also lay tiles on a concrete base.

When treating with water, make sure that the sand is not washed away

The surface on which the tiles will be laid must be leveled

Clinker brick paving

Limitless imagination, a set of necessary equipment and a little patience - this is what you need when working with clinker. Material happens different forms, but the most common are rectangular and wedge-shaped. Clinker bricks began to be used two centuries ago and were used for paving roads and sidewalks. Later it began to be used to decorate gardens and summer cottages.

The hallmark of the material is not only its aesthetically attractive appearance, but also a number of functional advantages. Clinker bricks are made from clay using the full sintering method. This means that such paving will last for many years due to its resistance to extreme low temperatures and moisture. It does not crack, can withstand heavy weight, can be cleaned with a brush, detergent and water. In addition, the material does not deteriorate from exposure to salts, alkaline agents and other abrasive substances.

The material is very resistant and is not subject to bad influences

A path made from such material can serve you for many years.

How to work with clinker bricks

If you decide to decorate your garden in a country style, the material will fit perfectly into the overall picture. It is necessary to pay close attention to the paving method. A garden path with smooth curves will look impressive. At the same time, pay attention that the path does not consist of sharp turns, this will prevent material from being trampled along inner corner. The process of working with coating is not complicated, but it has several nuances:

the site is marked to determine the zero line, the slope is made towards a convenient outlet from excess moisture;
Pegs are placed in the corners of the site and a rope is stretched along them;
a second rope is fixed to one of the pegs and retracted 90 degrees;
boards are dug into the ground, a little away from the pegs, if necessary, an additional layer of soil is poured and compacted;
a solution consisting of cement and sand is prepared;
clinker brick is laid using a rubber hammer;
If necessary, fill the seams with additional mortar.

Consider the presence of a border. The border will look great from an aesthetic point of view and will help maintain the contours of the path, blocking the path of flowing moisture. It can be formed using bricks, carefully placing the material on the edges of the path or burying it in pre-dug small trenches.

Smooth curves will further decorate the overall picture.

The border will further decorate the path

This material fits perfectly into country style

Paving slabs

Paving slabs It will last for many years, just lay it down correctly. Choosing a tile will not be difficult; there are many types of coatings on the construction market, ranging from color to size and pattern applied to the surface. You can easily install the material yourself, without the help of professionals. To save money, it makes sense to use the cheapest and simple techniques laying paving slabs. To work, you will need tools that every owner will probably have: a bayonet and shovel, a peg, a level, a rubber hammer, a rake, a device for leveling the soil, a brush with hard bristles.

To lay the tiles yourself, you will need standard set tools

So that the tiles last for a long time, you need to lay it out correctly

How to lay paving slabs

Before starting work, it is necessary to remove everything unnecessary from the territory and remove excess grass. Then go to the site markings and think about the width of the paths and their directions. It is irrational to make wide garden paths. This is quite expensive and takes up a lot of space, which can be used for other needs.

To mark the boundary of the future surface, pegs are placed and a rope is pulled over them. This is done to give a smooth surface to the path. Depressions are dug in the ground. To determine the depth of the trench, you need to measure the thickness of the tiles. For example, if the material is 7 cm thick, then it is advisable to make a hole 10 cm in size in the ground. Next, according to the boundaries of the rope, the side is knocked out using a shovel. The tool must be held strictly vertically. After work on the sides is completed, you can begin to remove excess layers of soil inside. The next step will be to distribute the sand inside the resulting space, while ensuring the uniformity of the surface. You can correct flaws using a shovel. Now you can begin the most important task: laying paving slabs. It is necessary to check the quality of work using a level. The slope per 1 m of the path should be 1 cm. The resulting seams are rubbed with sand, treating the tiles with water.

Before installation, the area must be cleared of debris.

When laying tiles, you need to check the surface with a level.

Use of wood

The purpose of any garden path is purely utilitarian, but what if you show a little imagination and approach creatively the issue of arranging the territory. Wood - environmentally friendly pure material having an aesthetically attractive appearance. Wooden paths will decorate any area and will look non-trivial and interesting. The material can be timber, boards, garden parquet or boards. But increasingly, cut wood is used to decorate a personal plot.

Before starting work, you need to make a choice between numerous types of wood. It all depends on how long you plan to use the track. Oak will last about ten years, pine will not lose its properties for 7 years. Larch can be considered the most durable species; it is the most durable and will last about 25 years. The more load will be placed on the path, the larger the wood blanks should be in diameter. It is advisable to make them at least 15 cm in height. With such dimensions, the wood cut is firmly fixed in pre-prepared holes and will not fall out during operation.

IMPORTANT! It is necessary to discard saw cuts that have cracks. Before laying, it is recommended to clear the tree of bark, this will extend its service life.

The marking of the site is carried out as in the cases described above. For comfortable movement of one person, 60 cm of the path width will be quite enough. The bottom of the trench is laid waterproofing film. If you don’t have it at hand, you can stop at the usual one. plastic film. The next step will be to distribute the required amount of crushed stone on the prepared surface. Crushed stone acts as drainage and protects the wood from unwanted moisture. The sand is distributed in an even layer, after which you can begin laying the cut. The distance should be minimal. The gaps between the workpieces are filled with sand, and the material is watered with a small amount of water to compact it. You can decorate the path different ways. For example, paint the cut, sow the gaps with grass or decorate with pebbles. Remember, wood is susceptible negative influence environment, so before laying it is better to cover it special compounds preventing it from rotting.

You can make a wooden path yourself

Wooden paths will decorate any area and will look non-trivial and interesting

Concrete path in the garden

Each method of laying a garden path has pros and cons. concrete path- not an exception. Thousands of owners of individual housing choose this method of decorating their local area. Concrete – durable material, can last for decades at correct operation. The design is quite easy to create without the help of professionals. And besides, a concrete path is a great way to save money; the material is relatively inexpensive. Concrete can withstand significant mechanical loads without any problems, and installation does not take much time. But, like everywhere else, it also has its downsides. During the off-season, the material often cracks. This is due to ground movement in rainy weather. It is unlikely that it will be possible to change the location of the path in the future; the structure is capital. Therefore, it is better to take your time and think carefully about the directions of the paths and their width.

The process of laying a concrete path with your own hands must begin with the installation of formwork. It is better to use boards for this. If you plan to add some bends to the structure, use any plastic materials. Plywood is a great option. Please note that concrete must be poured in parts in any case. This is done to compensate for expansion or contraction of the material due to temperature changes. Therefore, there is no point in making continuous formwork for the entire area. You can lay it partially, thus significantly saving materials for the structure. Professionals recommend forming the pillow from a mixture of compacted crushed stone and sand. It makes sense to think about waterproofing. Geotextiles or roofing felt will serve for these purposes. Next stage- This is pouring concrete. The solution is mixed from cement and sand in a ratio of 1 to 3. The preferred concrete thickness should be at least 5 cm. The resulting layer is leveled using a spatula. After moisture appears on the surface, all surface irregularities can be removed and the concrete is wetted with water.

A concrete path is the cheapest and easiest option.

You can create such a track without the help of professionals.

Concrete is a very durable material and can last for decades

Plastic modules

The use of plastic modules in laying garden paths is a new technology that has managed to win thousands of fans all over the world. Plastic is a material that is quite light, cheap, durable and strong. The advantage is that the plastic modules can be dismantled at any time. They are not exposed to negative environmental influences and do not enter into chemical reactions. It is in this case that you can choose any option, because there is a huge amount of plastic on the market various forms and colors. The tile includes a backing and an outer part. The substrate is designed for air ventilation and drainage of excess moisture. Before installation, it is necessary to level the surface on which you plan to lay the material. It is better to lay additional drainage on the soil. Crushed stone can be used as drainage. The installation itself is quite simple and is carried out using a locking fastening. This is how the parts of the tiles are connected to each other.

Plastic modules are not very expensive and easy to install

The lawn grate does not require special preparatory work

Using the form

Today you can make paths with your own hands without much effort. There are dozens of technologies in the world that make life easier for private home owners. One of the fastest technologies can rightfully be considered the use of special plastic molds. Everything is quite simple: cement is poured into the mold and left until it dries completely. For comfortable work, you need to acquire several samples; 2 or 3 forms will be quite enough.

Before laying the tiles, it is necessary to excavate the soil. The first layer is filled with sand to a depth of about 10-15 cm, then crushed stone (7-10 cm) is distributed, finish preparatory work it is necessary to distribute another layer of sand. After this, the sand is compacted and you can begin laying the tiles made using molds. It is recommended to fill the resulting cracks with sand, and then moisten the entire structure with a small amount of water.