How to coat a countertop with epoxy resin. We make a designer table from epoxy resin “for three pennies”

Today, there are many materials from which you can create aesthetic and practical furniture, and epoxy has recently been one of them. Using wood and this glue, quite interesting designer tables and shelves are made. Next we will tell you everything about the technical process.

Until recently, this two-component adhesive was widely used mainly for reliable connections. various materials, then they began to use it as a component for self-leveling floors. At the same time, such properties as low surface abrasion, high strength, and durability were noted. Further, separate transparent stamps began to be used for very interesting dioramas, where epoxy resin with dyes imitated water. Moreover, the creators made entire tables depicting various landscapes. Perhaps it was precisely such experiments that prompted the creation designer furniture made of wood and epoxy glue.

Epoxy resin can be molded into any shape

The main thing that can be noted as an advantage of the above-mentioned polymer resin is the ability to give it any shape due to fluidity in the liquid state and plasticity at the hardening stage. In addition, the hardened glue is quite easy to process, in particular: it is ground and polished, if necessary, it can be drilled and grooves made in it. There are brands that are absolutely transparent after hardening, and those that have a red, brown, yellowish or whitish color throughout their entire depth. At the same time, in a liquid consistency it is possible to add various components that improve or simply change the properties of the composition. The main positive property of the glue is the absence of shrinkage due to the fact that the composition hardens solely due to a chemical reaction, and, as a result, the even surface plane is maintained.

Now let's talk about the disadvantages. The fact that cured epoxy resin can be easily processed is sometimes also a disadvantage, since scratches easily appear on the surface. Otherwise, the wear resistance of this material is very high. Another factor preventing the widespread use of glue for furniture production is its price, which is quite impressive and allows you to create only single designer products. Brands that are absolutely transparent after hardening are considered especially expensive. And, of course, we should not forget about the toxicity of polymer resin fumes, work with which should be carried out in well-ventilated areas and always wearing a respirator.

Today there are many brands of domestic and foreign production. Essentially any type of furniture is suitable for making furniture, unless you have special requirements for the result, but if you want to combine wood with epoxy resin, you definitely need transparent compositions. Otherwise, you will not be able to show the beauty of the wood fibers in the depth of the pour. As a rule, among imported options it is worth paying attention to the brand YD-128 characterized by a high degree of transparency. Has also proven itself to be excellent MG-Epox-Strong, used for filling and obtaining transparent optical products. If you need color coating, please use MG Epox White – this type differs in milky white color.

To fill, you need glue with a liquid consistency

All of the above options are two-component glue with a liquid consistency, which you, in fact, need for filling, since a paste-like one is not suitable for this purpose. It should be noted that different brands can be quite successfully combined with each other, in this case milky inclusions of one type of glue can be enclosed in the thickness transparent fill. This will look especially impressive when adding dyes and in combination with wood inclusions. The main thing is not to mix too large portions, since in this case the reaction with the hardener heats the composition, which is why it polymerizes faster.

There are 5 states of glue. If it has a liquid base, its consistency after mixing with the hardener will be appropriate, such an epoxy resin should have good fluidity. It is recommended to fill it with it when making a furniture panel, be it a shelf shelf or the future wall of a chest of drawers. A thicker version, similar to honey or molasses, is suitable for gluing and for applying fill in layers. Thickened to the point where there is almost no fluidity and the individual parts are difficult to separate, it is sometimes suitable as a putty. Next, the glue begins to resemble rubber or plasticine, although it remains very sticky, which does not prevent you from giving it any shape with a stick or wire. And finally, the last state is completely hardened.

As mentioned above, 2 types of glue are used to make furniture - transparent and matte, and each of them can be colored. Now we will look at both options in more detail. For various combinations with wood or other inclusions, it is best to use transparent mixtures, especially those used for optical castings. In this case, even through a thick layer of glue, every detail of the inclusion will be clearly visible, be it fibers from wood trim or metal elements(such as old icons or gears). When adding special dye The transparency decreases somewhat, but not completely, but the fill gets a rich color.

You can create interesting interior items from colored epoxy

If you want to get a high-quality colored mixture, add a color from the same manufacturer that made the adhesive mass.

Colored mixtures are initially somewhat cloudy, they can be called rather translucent, and they are unsuitable as the main fill covering wood. The reason is simple - any inclusions simply will not be visible. But you can do the opposite and fill all kinds of cavities in the cut of wood, voids from knots, and woodworm passages that open on the cut. A luminescent dye combined with glue will look especially impressive. Then the slightest illumination will be enough to furniture panel or the tabletop itself began to glow.

A combination such as epoxy and wood has proven itself well for the simple reason that it turns out perfectly smooth surface, and at the same time the filling consumption is relatively small. The main volume is occupied by wood, which is covered on all sides thin layer polymer resin. However, be prepared for the fact that the expense will still be noticeable. It is easy to calculate that 10 square centimeters of fill with a thickness of 1 centimeter will require 100 grams of glue. Accordingly, at 1 square meter You will need 10 liters of the composition, and for a tabletop 1x2 meters - 20 liters. And this is only for the top layer, but if you make a thicker layer of epoxy in order to immerse wooden scraps or boards into it, you will need at least 2 times more mixture.

There are quite a few subtleties of using glue. In particular, an interesting effect can be achieved by adding a little water to the composition. Milky-white stains similar to a nebula form in this place. That is, with small drops of water you can get beautiful inclusions in painted epoxy. You can make a multi-color coating by pouring portions of different colors in portions or separating them with small thin plastic barriers. But such fills should be quite thin, no more than 0.5 centimeters, and another, transparent layer will be needed on top. The composition can be colored with ordinary dry gouache, as well as with ink for writing (including paste from rods ballpoint pens), oil and nitro paints.

Epoxy has very strong adhesion to almost all materials, in other words, if you choose the wrong formwork, the glue will stick tightly to it. The only thing that epoxy resin does not stick to is plexiglass, the main thing is that there are no scratches or chips on it. Also, some craftsmen recommend using strips and sheets of polished aluminum. If you want to finish the table only on top, epoxy resin is poured into the formwork, fixed along the side edges of the panel. Accordingly, the ends of the tabletop will not be covered with glue.

If you need to cover only the surface of the tabletop with resin, you should make formwork

It’s a completely different matter if you need a thickness of transparent polymer, inside of which, like an insect in amber, a cut of wood or its individual fragments will be enclosed. In this case, the inclusions should be fixed using ordinary starch paste on the base, which will serve as large leaf plexiglass. If you want the wood to be in the middle of the epoxy thickness, secure the inclusion to the sides of the formwork. The walls of the mold must be attached to the base sheet only from the outside so that they can be easily detached after the mixture has completely hardened.

Mix and pour epoxy - make a transparent or colored panel

It is noteworthy that the reaction after mixing the main component of the glue with the hardener is accompanied by heating of the composition. And the larger the portion volume, the stronger the heating, the faster the epoxy sets. Therefore, it is recommended to use only small containers. Some experts advise adding acetone to the main component, about 10% of the total volume, and only before mixing with the hardener. This will reduce heat and prolong the hardening process of the composition. You can also influence the hardening process by slowing it down somewhat by cooling the dishes. With sudden cooling, solidification will then proceed very slowly, over several days.

Furniture made of transparent epoxy resin There are two types - massive cast or assembled from prepared panels. In the first case, the stools look like pedestals, the tables look more like thick slabs, while the second option is closer to classic furniture designs. But, whichever type you choose, before the wood and the mixed epoxy resin are joined, the base must be perfectly leveled using a level; this is not difficult to do with your own hands. Otherwise, the mixture will flow to the lower edge. To set the horizontal line, you can place wedges under the edges, and under the middle of the bar different thicknesses so that the plexiglass sheet does not bend. A table made of wood also needs to be leveled by placing thin liners under the legs.

Now we prepare the filling. To do this, you will need a small container, approximately 0.5 liters, maximum 1 liter, as well as a kneading stick. The measurements should be included in the kit; if they are not, prepare cups with divisions marked on them. We take the main component, measure out a certain amount of it, sufficient to obtain a thin layer. If the epoxy resin table will have a large area, prepare several containers at once to mix an amount that will create a layer approximately 0.5 centimeters thick. Open all windows to allow fresh air into the room.

Be sure to wear special clothes from which threads will not fall, tuck your hair under a cap or scarf, and put gloves on your hands. It is extremely undesirable for hairs, eyelashes, and villi to get into the composition. To ensure that products made of wood and transparent epoxy resin are free of bubbles, if you find any excess inclusions after emptying the container with the composition into the formwork, lightly warm up such an area with a hairdryer, the air should escape out. Hardening takes several days, especially if the filling forms several layers. Next, to smooth the countertop, we carefully grind and polish the surface of the thinnest sandpaper and felt with special pastes.

One of the simplest, but effective ways To decorate the interior of your home creatively and brightly is to make a table from epoxy resin with your own hands. Unique properties of this material make it possible to realize the craziest design idea and make both a simple table and a real masterpiece unusual shape. And the ability to use different fillers makes it possible to make regular table a real work of art.

Epoxy - advantages and nuances of work

Using epoxy to make furniture (tables, bar counters, bedside tables) at home has a number of advantages, among which are the following:

• This material does not change in volume during the drying process. While other similar compositions shrink due to liquid evaporation during the hardening process, epoxy resin hardens due to certain chemical reactions and retains its original volume.
• The epoxy surface does not deform and is not susceptible to damage; chips and cracks do not appear on it during use.
• For a novice craftsman, it is important that working with epoxy resin is very simple. To do this, you don’t need to have any special skills - you just need to strictly follow the instructions.
• Another important advantage is the availability of this material.

Important! It is recommended to carry out all work in a special painting suit, some kind of headdress and rubber gloves. These precautions must be taken because dust particles or hair that may enter the resin from the human body will be very difficult to remove.

Epoxy preparation and work conditions

Typically, epoxy resins for decorative works are supplied in kits that include a resin and a special hardener necessary to initiate a chemical reaction to harden the product.

Using this material, you need to know the following:

• Since this process is irreversible, the epoxy must be prepared strictly according to the attached instructions, observing the proportions of ingredients specified by the manufacturer.

Important! It is worth remembering that the proportions of epoxy resin and hardener different manufacturers may differ significantly.

• To mix the components, you will need 2 measuring containers of suitable size and a stick for thorough mixing. First you need to measure the resin, and then pour it into it required quantity hardener, then mix the mixture thoroughly until a homogeneous mass is formed.

Important! If you don't mix thoroughly enough, the finished mixture may not harden well.

• Making a table made of epoxy resin with your own hands must be positioned strictly horizontally, otherwise the tabletop will turn out uneven and with sagging.
• The pouring mold must be completely dry before work. In addition, water should not be allowed to enter the solution or onto work surface.
• The construction must be manufactured at temperatures above +22 degrees and low air humidity.

Important! The higher the air temperature, the faster the mixture will harden.

• Some craftsmen, wanting to speed up the hardening process of epoxy, use a hair dryer or other heating devices. However, this may cause the mixture to “boil” with the subsequent formation of air bubbles.

Important! If bubbles do form during the pouring process, they should be carefully removed. This can be done using a syringe or cocktail tube.

• To prevent particles of debris or dust from getting into the curing resin, it is advisable to use special stands with a tarpaulin or film material stretched over them, which will protect the table from foreign particles. At the same time, it is necessary to ensure that protective covering did not come into contact with the surface of the countertop.
• Since cured epoxy is very difficult to remove from the surface, it is necessary to prevent it from getting on the floor. To do this you need to cover the floor around the table plastic film, which can simply be thrown away after completion of work.

Important! If there is still a need to remove the hardened epoxy, then this can be done mechanically or using special solvents.

General manufacturing principles

In order for the epoxy resin table to turn out exactly the way you planned it, the mold must be poured at the appropriate stage of hardening of the mixture:

• At the liquid stage, the mixture flows freely from the stirring stick. This material is perfect for pouring molds and filling corners and depressions.
• When the epoxy reaches the consistency of honey, it can be used as an adhesive.
• The mixture is at the rubber stage - different elements can be sculpted from it.
• When the resin reaches the solid stage, the product is ready for its intended use.

The tabletop can be made in one color, with various inclusions, with a combination of colors and materials, or entirely from epoxy. In the latter case, a template (formwork) should be made from aluminum corners and a glass base. The glass must be thoroughly washed, wiped and treated with a degreaser. Aluminum edges must be attached to the glass using window putty and rubbed with wax mastic.

Transparent or plain tabletop:

• Making a one-color tabletop from epoxy resin with your own hands begins with cleaning and degreasing the workpiece.

Important! If the base is a material that can absorb liquid (for example, wood), then it must first be primed with resin. This will make it possible to avoid the occurrence of bubbles during operation.

• On next stage Epoxy resin is prepared, after which it is poured into the mold.

Important! If the table is made in one color, then a coloring pigment is added to the resin, and it is desirable that the paint be from the same manufacturer as the epoxy. If you plan to color the table in combination, then during the pouring process you need to use resin with dyes of several shades.

• After pouring, leave the countertop for about 15 minutes and then remove any bubbles (if any).
• After two days, the finished product is ground and polished.
• After another week, the table is completely ready for its intended use.

Making a countertop with filler

The most original version furniture made from epoxy resin with your own hands is a tabletop with a filler, which can be used as various stones, small figurines, coins, bottle caps and other items:

• When making such a table, it is necessary to thoroughly clean and degrease the workpiece (if necessary, paint it), and also equip it with small sides.
• After this, filler is laid out at the bottom of the base.

Important! The inserts must be thoroughly cleaned and completely dried, as the use of wet litter may cause whitishness. If the filler is light in weight, it must be glued to the base, otherwise it may float.

• If the filler is different small height(up to 5 mm) and a simple shape, then the resin is poured in one layer. If the investments are large and textured, then the filling is done in several stages with breaks lasting up to a couple of days.
• It may take up to 3 hours for the epoxy to penetrate into the recesses of the figured filler, so experienced specialists advise first immersing the textured parts in the resin, and only then laying them out in the mold.

In an effort to make the interior design of a house or apartment original and unique, many owners strive to use non-standard solutions and specific materials. An interesting option is to decorate rooms with tables made of epoxy resin. This substance, which belongs to oligomeric compounds, is distinguished by high technical and operational properties. In the article we will look at best ideas, how to make a table from epoxy and methods for constructing them.

Manufacturing Features

In the manufacture of furniture, epoxy resins are not used pure form, and in combination with special hardeners. The consistency of the resulting mixture depends on the proportions of the individual parts.

Decorating tables with epoxy requires a coating wooden base pre-prepared composition. Subsequently, when the product hardens, careful polishing is required. The resulting tabletop is characterized by increased wear resistance, as can be seen in the photo of tables made of epoxy resin.

Clearly selected ratios of components determine the quality of the composition and the manufactured furniture product. If this condition is violated, the strength may decrease, and the resistance to external factors will not be too high. Typically the selected resin to hardener ratio is 1:1 or 1:2.

In the production of tables and other pieces of furniture in living conditions Cold-curing epoxy is used.

However, it must meet a number of requirements:

• low cost of material without losses in technical specifications, since the costs will be high;
• low viscosity of the composition without the presence of bubbles after stirring;
• maintaining volume during hardening;
• the hardening process should proceed slowly, which will allow the creation of patterns;
• For visual effects it is advisable to choose transparent types resin.

Advantages and disadvantages

If you decide to make a table from epoxy resin with your own hands, then you need to take into account the main advantages of this material:

• absence of serious shrinkage when drying, preservation of shape and color;
• not subject to deformation and mechanical stress;
• the ability to create original designer table models;
• compatibility of resin with other decorative elements - coins, stones, shells, rubber, corks, etc.;
• possibility of using dyes and phosphorescent paints;
• moisture resistance and impermeability;
• resistance to chemical components and detergents.

The main disadvantage of making tables from epoxy is the high cost. Up to several tens of liters of mixture are spent on the manufacture of one product. You should also consider the possibility of bubbles appearing on the surface of the composition.

Manufacturing technology

To get a quality product, it is important not only to dilute the mixture correctly, but also to follow the instructions on how to properly make a table from epoxy resin. First, the surface to be treated is thoroughly cleaned of dust and dirt. The wooden surface is primed. Ignoring this requirement leads to the formation of bubbles when the mixture is absorbed by the porous structure of the wood. They will spoil the look of the table.

After this, you can prepare a mixture of resin and hardener in the required proportions. Dyes and decorative components are added to the prepared solution. Then the mixture is covered with a wooden base.

Table decoration decorative elements need to think about it in advance. All required parts are laid out on the surface of the wood before pouring the epoxy. Light parts, such as shells, should be pre-planted with glue, which will prevent them from rising to the surface of the mixture. Any bubbles that arise are removed with a stream of air from construction hair dryer.

The first setting will begin in a quarter of an hour. However, this is not enough to start grinding. Sanding should only be done after complete drying. The product is aged for 7-10 days, after which it can be used.

It is important not to forget after completion grinding work coat the surface with varnish protective properties. Moreover, it is advisable to do this in several layers. This way you will prevent even minimal release of toxic components.

Types of products

Many craftsmen are interested in the question of what kind of table can be made from epoxy resin. There are no special restrictions - it all depends on your imagination. We will consider some options.

Imitation of cracks

The tabletop and table body will look original if they are decorated with a bark beetle look or imitate fungal damage. By filling cracks with epoxy, you will create unique patterns, and you can make the holes and crevices yourself.

You can fill the cavities using a brush and spatula. After hardening, the excess is cleaned off grinder, since the composition should only be in cracks. A protective varnish is applied on top of the coating, which will also provide brightness.

Note!

Transparency or monochrome

The workpiece should be cleaned and degreased. Before applying the resin, the wood is primed. This prevents bubbles from forming. The diluted epoxy is placed into the mold. The desired pigment is added for the color effect. The combination of colors is provided by several dyes.

The poured countertop is kept for 15-20 minutes, and any bubbles that appear are removed. After two days, the table is sanded and polished, and after a week the product will be ready for use.

Application of fillers

First you should select the necessary items as decorative fillers. These can be caps, pebbles, shells. The surface of the workpiece is degreased and, if necessary, treated with paint.

Dry fillers are placed on the workpiece and, if necessary, glued to the surface. Epoxy is poured in one layer, if the parts are small in height - up to 5 mm. In the case of large sizes, in the presence of large recesses, the resin is laid in several levels with a 2-day break in application between them.

To make a piece of furniture aesthetically attractive, you must follow the rules for pouring a table with epoxy resin:

• cover workplace plastic film;
• limit the possibility of dust getting on the workpiece;
• the presence of water and its penetration into the mixture can damage the countertop;
• at large quantities material hardening speed is higher;
• acceleration of hardening is possible by increasing the temperature;
• Grinding and polishing the product affects the quality of the table.

Note!

Designer table models can be created by simulating natural landscapes on the tabletop using epoxy. These could be rivers, seas, lakes.

Photoluminescent paint provides a green glowing effect, and making it on the tabletop will help add unusualness to the interior. geographical map. It is only important to be careful and attentive in your work.

Photo of epoxy resin tables

Note!

Hello Dear Friends!

This article will talk about working with resin when making a table or countertop:

• For transparent products it is necessary to use a new generation resin: MG EPOX STRONG
• For color (designer and single color): MG EPOX WHITE (no longer available)

As for hot items: it is strictly forbidden to place frying pans or pots removed from the stove!!!

Making a table/tabletop with your own hands from epoxy resin:

Where to start is, of course, with surface preparation, because, as in any other matter, quality preparation is the key to success. The blank of the future product must be placed in a horizontal position with maximum accuracy, otherwise sagging may form.

IMPORTANT!!!

When we make an item in a horizontal position, there is a possibility that unwanted objects will get into the resin mass, such as hair, eyelashes, remains of dried paint on special sleeves. clothes, etc.

Specialist. cloth:

• paper painting suit
• rubber gloves (gloves are very important point because there is hair on the fingers)
• headdress; a shower cap is suitable for this purpose.

Let's look at the three most popular options for making countertops:

• monochrome
• combined colors
• with fillers and decorative attachments in the resin mass

Single color:

1. The application surface must be dry and clean
2. If the surface is absorbent, for example, made of wood (), then it should first be generously primed with resin to cover the pores. If this is not done, then when pouring resin it will begin to be absorbed and air bubbles will creep out.
3. Now we take resin and dyes, we get desired shade and pour onto the surface
4. Let it sit for 10-15 minutes and use a hair dryer or torch to remove any air bubbles.
5. Leave for 48 hours, then you can sand and polish (if required). Full strength gain 7 days at room temperature.

___________________________________________________________________________________________________

Combined colors:

1. Everything is the same as in a single-color application, but other colors are added.

with fillers and decorative attachments to the resin mass:

This production is the most responsible and requires the attention of the master!!!

1. We have already talked about a dry and clean base, now it is worth noting that decorative attachments and fillers must also be 100% dry. Sometimes customers ask what will happen if they add a slice of lemon, a fresh rose, moss, etc. We answer: if the filler is not dried, then at the moment of contact of wet objects and the resin, whitish spots will appear, this is the reaction of the resin with water.
2. Light attachments must be glued to the base otherwise they will float. If fillers and decors do not have high altitude, say 1-5 mm, then you can fill the resin at one time.
3. If tall and complex shaped objects (), such as stones, spanners, chain, etc. objects that have texture and indentations, then you should be patient and do the filling in several operations. It is recommended to fill the intermediate layers no later than 48 hours.
4. When pouring layers, the condition of the resin should be monitored, because in some cases, there are depressions and pores in the objects and decors being poured, the resin gradually penetrates into these places and squeezes out air, respectively, bubbles rise to the top and must be removed by heating (hair dryer, burner). This resin penetration process can take up to three hours depending on the structure of the item. The easiest way is to pre-dip or thoroughly coat the object with resin, and then immerse or fill it with resin.

After applying the last layer of resin, the product needs to gain strength, at room temperature this happens within 7 days, you can speed up the process of gaining strength by placing it in a heat chamber, optimal temperature 25°C, so strength gains occur in 3-4 days.

An example of processing objects with resin and pouring:

Photo gallery: tables and countertops made of epoxy resin:

One of the simplest and effective ways To make the interior of your home bright and creative is to make a table from epoxy resin with your own hands. The unique properties of epoxy allow you to realize the craziest design idea and make both a simple table and a real masterpiece of amazing shape. And the ability to use various fillers allows you to make the table a real work of art.

Using epoxy resin to make furniture (tables, bedside tables, bar counters) with your own hands at home has a number of advantages. For example, this material does not change in volume when dried. If other compositions shrink due to the evaporation of liquid during the hardening process, then epoxy hardens due to chemical reactions and retains its original volume.

The surface made of epoxy resin is not afraid of damage and does not deform; cracks and chips do not appear on it during use. Another important advantage of this material is its affordable cost. And for a novice master, it is important that working with epoxy is quite simple. You don’t need any special skills to do this; just follow the instructions carefully.

All work must be carried out in a special painting paper suit, rubber gloves and headgear (for example, a shower cap). These precautions must be taken because dust particles or hairs that become embedded in the resin from the human body will be extremely difficult to remove.

Epoxy resins for decorative work are sold in kits that include a resin and a special hardener, which is necessary to initiate a chemical reaction to harden the product. Since this process is irreversible, epoxy must be prepared strictly according to the instructions, observing the proportions of the components specified by the manufacturer. It should be remembered that the proportions of epoxy and hardener may vary significantly from one manufacturer to another.

To mix the components, you need 2 measuring containers of suitable sizes and a stirring stick. You need to first measure the resin and then pour it into it required amount hardener, then thoroughly mix the mixture until a homogeneous mass is obtained. If you do not knead thoroughly enough, the finished mass will harden poorly.

The blank for the future table must be positioned strictly horizontally, otherwise the tabletop will turn out uneven, with sagging. The form for pouring should be completely dry before work; moisture should not be allowed to get into the solution or onto the working surface. The construction must be manufactured at low air humidity and temperatures above +22 degrees Celsius. The higher the room temperature, the faster the mixture will harden.

Some craftsmen try to speed up the hardening process of the material using a hair dryer or other heating devices, but this can lead to “boiling” of the mixture with the subsequent formation of air bubbles. If bubbles still form while pouring epoxy resin with your own hands, they must be carefully removed. This can be done using a syringe or cocktail tube.

To prevent particles of dust and debris from getting into the hardening mixture, it is recommended to use special stands with film material or tarpaulin stretched over them to protect the table from foreign particles. In this case, you need to ensure that the protective coating does not come into contact with the surface of the countertop.

Since cured epoxy resin is extremely difficult to remove from the surface, it must be prevented from getting onto the floor. To do this, cover the floor around the table with plastic wrap, which can be thrown away after finishing the work. If there is still a need to remove the frozen mixture, this can be done mechanically or using special solvents.

In order for the epoxy table to turn out exactly the way you intended it, the mold must be poured at the appropriate stage of hardening of the mixture. Thus, at the liquid stage, the resin flows freely from the stirring stick. This material is excellent for pouring molds and filling cavities and corners. When the epoxy reaches the consistency of honey, it can be used as an adhesive. The material at the rubber stage resembles plasticine and can be used to sculpt various elements. When the resin reaches the solid stage, the table is ready for its intended use.

The countertop can be made in one color, with a combination of colors, with various attachments, with a combination of materials, or entirely from epoxy. In the latter case, it is necessary to make a template (formwork) from a glass base and aluminum corners. The glass must be thoroughly washed, wiped, and treated with degreasing agents. Aluminum edges must be attached to the glass with window grease and rubbed with wax mastic. This treatment is necessary so that the mold can then be easily removed from the frozen tabletop.

Making a table with a single-color tabletop begins with cleaning and degreasing the workpiece. If a material that absorbs liquids (for example, wood) is used as a base, then it must first be primed with resin. This will prevent bubbles from appearing during operation. The next step is to make an epoxy mixture and pour it into the mold.

If the table is to be made in color, then the appropriate coloring pigment must be added to the resin, and it is desirable that the dye be from the same manufacturer as the epoxy. If you want the color of the tabletop to be combined, then during the pouring process you need to use resin with dyes of several shades.

After pouring, you need to leave the countertop for 10-15 minutes, and then remove any bubbles if they appear. After two days, you can grind and polish the product. After a week, the table is completely ready for use.

The most unusual option for epoxy furniture is a table top with filler. Various small figures, stones, coins, bottle caps and other items can be used as filler. When making such a product, you need to thoroughly clean and degrease the workpiece (paint it if necessary), and also equip it with small sides. Then fillers should be placed on the bottom of the base.

The attachments must be thoroughly cleaned and completely dried, as the use of wet litter may cause whitishness. If the attachments are light in weight, they need to be glued to the base, otherwise they may float.

If the fillers have a simple shape and small height (up to 5 mm), then the resin should be poured in one layer. If the investments are large in size or textured (have protrusions and depressions), then the filling must be done in several stages with breaks lasting up to two days. It can take up to 3 hours for the resin to penetrate into the recesses of the shaped fillers, so experienced craftsmen recommend first immersing the textured elements in the resin, and only after that placing them in the mold.

Another popular solution is to combine epoxy and natural wood. To do this in wooden tabletop cavities are formed, after which wooden surface carefully polished. A fluorescent pigment is added to the prepared resin, then the cavities are filled with this mixture. After complete drying, the product is coated with several layers of varnish with intermediate grinding. When the work is finished, the table is ready for use.

Return