Transforming your interior with lamps created according to your own design is an exciting and at the same time useful task. A small luminous detail of the living space invariably attracts attention and the whole life of the house in the evening and at night is concentrated around it.
How to get started
Make up step-by-step plan, a sketch of the future device, purchase materials for electrical installation and decoration, prepare tools and workplace. All aspects related to safety precautions during work and use of the lamp in everyday life are carefully considered.
Unnecessary and already used things in the household can become a necessary help for the planned electrical device and with their help you can not only save money, but also give them a second life in designer lamps.
Instructions on how to make a lamp with your own hands
Loft-style lamps (the simplest designs) are gaining increasing popularity and are well suited to many types of interiors. Factory-produced lighting fixtures in this style cost a lot. But a person who has assembly skills can easily assemble from scratch, not inferior to them table lamp for 220 volts with your own hands, combining metal and wood.
For the stand, select a board that is suitable in size and at least 5 cm thick. They are processed, trying to preserve the natural texture of the wood - sanded, covered with stain.
To attach the legs, make a hole in the board with a drill (19 mm in diameter) half the thickness and screw the adapter into it. A hole is drilled perpendicularly and an electrical wire is pulled through. On the other side, connect the switch and plug.
To assemble the lamp, purchase a copper pipe (12 mm), fittings, a socket, a lamp, a can of copper paint, and super glue. Tools used include pipe cutters, pliers, and screwdrivers.
The pipe is cut into pieces - 50,60, 150, 350 mm. A wire is pulled through the longest section and connected to the adapter on the stand. Passing a cord through each section, connect the remaining parts with fittings in the form of the letter “L”. For a more stable structure, the parts are glued.
The cartridge, pre-painted, is disassembled and the insulation is stripped. Connect ground and phase. Screw in a regular 220 V light bulb. In stores there is big choice retro lamps: Edison and LED, suitable in style, but with modern characteristics.
You can assemble a table lamp from LEDs with your own hands. Their use significantly saves energy, and appearance and the nature of the lighting look modern and stylish on the table.
What is a dimmer for?
Loft style welcomes freely hanging light bulbs - both on tables, on walls and even in chandeliers. Depending on the situation, it is appropriate to change their brightness using a dimmer, a device that changes electrical power.
The dimmer changes the interior lighting over a wide range and acts as a switch. There are many types of them on sale. But if desired, every craftsman can try his hand at fine, painstaking work and make a dimmer for a table lamp and other lighting devices with his own hands.
Parts (triac, dynistor, diode, non-polar capacitor, fixed and variable resistors, LED for indicator) can be purchased at any specialized store. Installation diagrams and algorithms are available on the websites.
How to make a bottle base
An interesting option for mounting a lamp is a glass bottle. Holes are drilled at the bottom and in the lid using a drill. Connect to a metal support placed horizontally using nuts and washers. Electrical cord threaded through the holes and brought to the neck of the bottle, connecting to the cartridge.
The completed lampshade and cartridge are securely fixed at the top of the bottle neck. Glass can be painted or decorated using jute filigree technique.
There is another option. If the neck of the bottle is wide and the cartridge fits into it, then the wire is taken out through it and without the labor-intensive operations of drilling glass.
Frames and their decor
Frames are made from various materials– metal, wood, plastic. For making it yourself metal frame For the lamp, use rigid wire.
Using pliers, bending the wire and strengthening it, create the intended shape. Wrap with cloth, paper, jute. If there finished frame made of metal, use it. A simple twist changes shape.
A metal mesh reinforced around the frame will give additional impulses for the development of creative thought. The mesh is attached to the frame with plastic clothespins and decorated with three-dimensional elements, for example, plastic fasteners.
Jute or decorative rope so that it turns out to be a braid, or wrap them around the lampshade. If necessary, paint with acrylic paints.
Original and effective way decorate the lampshade - use beer keys tin cans. You need to accumulate quite a lot of them. A cut is made in each of the keys, then folded in half to hang on the top wire ring. This creates the first row. The two keys of the top row are hooked to the key of the bottom row, etc.
A simple frame is covered with a beautiful fabric that matches the interior, glued with silicone glue. Corrugated decorative paper looks good. Are used plastic bottles and spoons, beads. Horizons open up for lovers of patchwork and decoupage practical application these techniques. The photo shows lamps made by yourself.
In addition to standard lighting using a socket and a bulb, with inside any lampshade attach a light, sticky LED strip with a constant voltage source of 12 V.
What to make a chandelier from and how to hang it
You can use waste and specially purchased materials for the chandelier. It’s easy to make lampshades out of them with your own hands, and if you follow proper connection techniques and all the subsequent steps, it’s safe.
The production of frame lampshades and their decor are discussed above. Let us add that chandeliers made of wood, plastic and cut glass bottles, CDs, and cans look very impressive.
The chandelier must be suspended on a separate rod. Rigid and flexible suspensions, special cables carry out reliable fastening to the ceiling of even the lightest chandelier.
The cartridge is disassembled, the cable is pulled through, a loop is made under the cover and a lock washer is put on to prevent accidental pulling out of the cartridge. They pick it up and screw it into the finished cartridge with their own hands. led lamps or Edison. Globe lamps with a frosted bulb and shank are excellent, creating bright, but not dazzling lighting.
By combining various decorative techniques and assembly techniques, and understanding electrical engineering, you can create amazing and functional lamps that highlight the style of the interior.
Photos of lamps with your own hands
It would seem, why waste time if specialized stores offer a wide variety of style options: from classics and hi-tech to minimalism and Provence. However table lamp with your own hands allows you to create a unique decorative lighting fixture that matches the interior of your home.
Advantages of DIY lamps
We would like to immediately emphasize that this is not only financial savings. IN in this case You are guaranteed to get a unique, inimitable device. Even if you use the lampshades described below, it will still become unique, just like its creator.
How to make a table lamp
The main thing is to use your imagination and see what is available at home. The materials used are:
- glass jars or bottles of various sizes and shapes;
- plumbing plastic pipes different diameters;
- plastic vessels. It is advisable to choose from dense material;
- vases and flowerpots.
Laconic lamp for modern interiors
This option can be called universal and economically acceptable, since it is not difficult to make, it looks presentable and is suitable for rooms with different decorations.
To make your own lamp, you need to take:
- roulette;
- Phillips and flathead screwdrivers;
- black marker;
- knife to strip wires;
- metal hacksaw or pipe cutter;
- acetone for degreasing;
- Super glue;
- switch with decorative light bulb;
- copper corners - 90º;
- copper tube;
- electrical wire
The work is quick and uncomplicated, the main thing is to do all the work carefully to ensure reliable connections and safe electrical connection. First of all, marking is done copper pipes using a tape measure and marker.
Using a pipe cutter or hacksaw, you need to cut the tube into pieces the right size. The markings are wiped off with acetone. Sequentially glue the parts together.
To be sure, press and hold for a few minutes. To avoid problems with the electrical wire, it is advisable to immediately pull it inside the structure, and then attach the lamp socket and plug.
Decorator's advice. An easy-to-use lamp is obtained by using elements of the following sizes: 20 cm - 1, 25 cm - 1, 15 cm - 3, 45 cm - 1 and elbows corresponding to the size of the tube.
Eco-friendly lamp
The material for the lamp mast is wooden beam size 20 x 25 mm, length 1 m. Sawn into 4 pieces of different lengths: 500, 250, 150, 100 mm. The ends are rounded, special cuts are made - recesses, and holes are drilled.
In this case, cuts are made on elements of 500 mm and 100 mm on one side, and on others - on both sides. In each strip, holes are made in the middle according to the diameter of the used electric cable. The foundation is being prepared. To do this, take a board of any arbitrary size so that the structure is stable.
A rectangle is drilled in the center according to the size of the strips used. The planks are connected to each other using a washer and a screw. Then they are attached to the base using a long wood screw.
This will ensure the reliability of the design. An interesting option could be old books connected to each other and mounted on a base. A hole is made in the center through which the rod is passed. After this, the lampshade with the cartridge is attached.
A single-core wire is connected to it (cross-section 0.75 mm² of each core). It is advisable that it be insulated, which does not have factory markings. To prevent it from hanging, it is passed through the holes in the slats. The switch can be of two options: installed directly on the wire or mounted on the base. A plug is installed at the free end.
Children's lamp: soft toy
The fabric should not be too dense and allow light to pass through. Therefore, you can use flax. When choosing a pattern, it is important to take into account the wishes of the child. Cut the fabric and connect all the parts except the bottom. Fill with sealant.
The fabric is impregnated with any composition that makes it dense (starch, gelatin). The improvised lampshade should dry well. A small hole is made at the bottom for the cord to exit. The seal is removed. A prepared LED cord is laid inside the structure. Can be used New Year's garland. The bottom is sewn up: the lamp is ready.
Ceramic vases, flower pots
This is the most easy option. The selected vessel becomes a lampshade. WITH flower pots There will be no problems: they have a hole in the bottom. You can make a hole in a vase using a drill, but you need to do all the work very carefully.
The surface is wetted, and the drill is set to minimum speed. Then a lamp socket is installed inside the vessel, a wire is supplied, and secured to the bottom with a washer. The lamp is screwed in. To create a night light, it is advisable to choose a low-power option.
Various lampshades
The above-described base of lamps can be decorated with various lampshades. Thanks to this they become a complement certain interior. The various directions that are taken as a basis are described below. Think about your preferences, hobbies, favorite activities and create something unique.
Plastic spoons
In the style of plastic spoons, ordinary utilitarian objects give an interesting opportunity to create an exclusive lampshade. To do this, take a plastic vessel of the required size, a large number of plastic spoons. It is impossible to indicate the exact quantity, it all depends on the size of the lampshade.
Handles are cut off from spoons. After that they use a gun to create decorative items and special glue are connected in series with each other.
In order for the structure to have the correct shape, the basis is plastic vessels for water or drinks. After the entire structure has acquired the required shape, the glue has dried, and a cartridge with wires is attached to the upper part.
Mysterious forest
For the lampshade, choose small branches of bizarre shapes. The bark is removed, impregnated with bactericidal and fire-fighting agents, and combined in any form.
Important advice. The only precaution: the branches should not touch the lamp to prevent a fire.
Use wooden tramples
An acceptable option for eco-styles. Thus, it is not difficult to make a table lamp with your own hands from scrap materials.
To do this, the hangers are disassembled into individual elements, which are securely connected to each other and attached to the electric cartridge. This option does not require additional decoration: wood emphasizes the eco-style well.
Gummy Bears
This is a rather labor-intensive option, but the result is a fun and, most importantly, safe lamp for a child’s room. Any old table lamp with a large soft shade can be used as a base. To do this, you need to remove the decorative material.
Turn the metal base upside down. Buy a large number of small multi-colored toy bears, string them on strong threads of various lengths and tie them to the upper, wide part of the base. The result is a “living”, cheerful design.
Musical lamp
For music lovers interesting option may be the use of small drums as lampshades. They create a luminous flux in two directions: up and down, so they do not irritate the eyes. But more importantly, the uniqueness of the lamp is guaranteed.
Sports theme
You will have to work hard with this material, but if you want, anything is possible. Bicycle parts are connected to each other and as a result form a chandelier that scatters fantastic designs on the walls and ceiling.
Fashion accessory
Hats are also used for these purposes; they can easily replace old lampshades and give the room an elegant charm. Depending on your wishes, it is easy to make male and female versions.
Handicrafts to help
In the past, interiors were decorated knitted napkins. Using this method, you can create a lamp. The only difference is the need to impregnate the material with PVA glue, which is diluted in a 1:1 ratio.
In order to give the product a shape, a ball of the required size is inflated or taken plastic bottle for 5 liters. Ready product impregnated with the composition and placed on the matrix. During the drying process, the knitted element takes on the selected shape. All that remains is to replace the boring lampshade.
Decorator's advice. You can create several versions of lampshades and change them from time to time depending on the time of year, holidays, changes in decorative details, textiles or style of interior decoration.
If you put in the effort and carefully handle all the details, homemade table lamps become unique decorative lighting fixtures that reflect the inner essence of the owners and make the home more attractive and cozy.
If you are tired of boring and monotonous things in your apartment that you see every day, then it’s time to diversify your design with hand made. DIY table lamp is great option in order to get started. It does not require special skills or hassle, and the result often exceeds expectations. In this article we will tell you how to make a table lamp with your own hands, how to decorate it and how to connect it correctly. We have also prepared excellent selection photo for your creative inspiration.
DIY table lamp: main design elements
The most popular and simple materials for creating a table lamp with your own hands are: cardboard, paper, glass bottles, cans, plastic containers, water pipes and cement. We will tell you how to make a lamp from all this material.
The main design elements in a table lamp of any type:
- Electromechanical - provides stability to a homemade table lamp and a safe power supply directly to the lamp.
- Support - supports the reflector or illuminator.
- The illuminator is a light bulb in a lampshade.
The electrical circuit of a table lamp is quite simple: power plug, cable, switch, light bulb socket. Sometimes a voltage regulator is added. The cartridge for a narrow E14 minion base is also attached to a thread or to a lamella in the form of a steel strip. For a DIY table lamp best option- chandelier sockets with slip-on threaded flanges: between them you can clamp a steel faceplate with a lampshade frame or a clamp for fastening on a hinge.
A DIY table lamp must be electrically safe. This is especially true for lamps on hinges and consoles. You can create a table lamp safety using a simple diagram:
- The cable must be round, double insulated
- The conductive cores of the cable are flexible, made of numerous wires.
Core cross-section from 0.35 sq. mm. - Cable wiring locations must be protected with dense dielectrics.
- Before inserting the cable from the inside, it is tied in a knot or pulled through the holes of the dielectric fixing washer so that it cannot break. Next comes finishing and decoration.
Original do-it-yourself lampshade for a table lamp
The lampshade must be made taking into account not only the aesthetic aspect, but also the practical one. It is important to secure it correctly, and also to make a convenient hole for the light bulb. Paper, plastic and thread are the materials most often used to make a homemade lampshade.
The simplest and comfortable material- this is paper. To create such a lampshade, in addition to paper, you will need: thread, PVA glue, sewing needle and scissors. There are many ways to make a lampshade for a table lamp with your own hands from paper. The simplest method- make a ball out of paper strips for the lampshade, gluing them together and at the poles. The shape in the form of a sphere will additionally strengthen the fragile paper lampshade.
You can also simply make a lampshade from disposable plastic cups, which are fastened with a stapler. This lampshade has quite good lighting characteristics, but at the same time the appearance is quite utilitarian. This type of lampshade is well suited for rooms where high-quality lighting is needed, but an aesthetic appearance is not required.
When making a lampshade from threads, you will need at least 100 m. It makes no sense to use inflatable balls as mandrels, because after 10-20 turns the ball will begin to bulge in different directions and ruin the shape. It is best to use a tightly inflated, durable ball for the mandrel. The mandrel must be lubricated with Vaseline. Next, after pre-lubricating with glue, wind the thread around the ball. When winding, be sure to leave a hole for the cable and cartridge. After a day, you need to blow off the mandrel, which, thanks to Vaseline, will not stick to the threads. The threads can also be replaced with jute, sisal or propylene twine.
These lampshades provide an even, soft light and are therefore perfect for any room.
How to update a table lamp shade with your own hands
Old, tired, frayed and faded lampshades can be easily updated using improvised means or even created new. We will tell you how to do it correctly and beautifully. You can use any textile as materials. Using fabrics and threads, you can sew or knit a lampshade into a dress. It's easy to decorate a table lamp shade with your own hands using: buttons, stickers, butterflies, beads, flowers and various braids.
If you want to create an original lampshade using improvised materials, there are a lot of ways. To create such a lampshade, the following are suitable: lids from tins, disposable tableware, your favorite pictures from a photo album, paper with drawings or just a lampshade decorated with your own hands.
Just use your imagination and you will get original lamp in the interior of your house or apartment. In the photo below, see a selection of do-it-yourself lampshade options for a table lamp.
What could be more beautiful than the satisfaction from something you created with your own hands? original crafts, which will become a bright accent in the gray routine? We offer several simple models, the production of which does not require professional skills and financial costs. Let's get to work!
Every day we have to throw away empty tetrapacks, but meanwhile this is an excellent basis for an openwork chandelier. We cut strips 5 cm wide, fold them into the required shape and begin to carefully glue them together. To prevent the structure from falling apart prematurely, assembly can be done on a round piece of suitable size.
Disposable spoons make a pretty decent lampshade. Take a 5-liter plastic container and cut off the bottom. We break off the cuttings and the remaining parts using glue gun We mount it on a base, imitating a pineapple peel. It is better to use a low-temperature light bulb for safety reasons.
Regular wooden hangers transform when creative approach. Simply by cutting them in half and placing them in a circle, you get a modernist chic lamp from the 30s era. A completely surreal option is also possible - pass a strong thread through the suspension attachment point and simply string the hangers, unrolling them a little.
Funny Gummy Bears – perfect solution for children's. The difficulty lies in the accuracy of the placement of individual figures, so we recommend making a template with radial holes through which we lower the white threads. Don't even think about using lollipops - these are acrylic figures!
The effect of a dense forest in the bedroom is achieved by whimsical chiaroscuro. Several stylistic roots, wire, skillful hands– and the original ball under the ceiling will plunge the room into the world of the unknown. Or collect the rhizomes, clean, dry and bind them however you like. It is better to varnish the finished product.
Has your drum kit lost its former appeal and is gathering dust in the garage? From boring musical instrument An extravagant chandelier can be mounted without any problems - fortunately, all fasteners are initially included in the kit. Original and beautiful, and most importantly – quiet!
If you are the owner of a bicycle workshop, then you probably have a container with unusable spare parts in the corner. A little creativity and welding machine– you will get a unique product, similar to the ancient inventions of the crazy Mechanicus. Of course, you can’t hang it in the living room, but it’s just right for a nightclub.
A leaky galabash (African gourd bottle) lends itself well to engraving. Intricate patterns, contrasting transitions of textures from shiny to matte, elegant perforations scatter ethnic ornaments of the Dark Continent on the walls.
It's all in the bag - a funny tandem of a top hat and a bowler hat creates a solid ambience for a cigar club for gentlemen. If you're not an English dandy, don't despair - an old Stetson, a bright sombrero or a straw brill will work too. It is important not to be hostage to sanctimonious dogmas.
Paper cups for cakes will become an elegant accent to your interior. This is not at all difficult - we glue them together in two, straightening the bottom one, and connect the resulting “flowers” with a thread in a spiral. We cover the original night light with glue or varnish for strength.
Banal iron graters look very original above the bar counter. You need 4 tubes with electric sockets and a meter piece of 2-core wire. Don't forget about fire safety - metal lampshades get seriously hot.
Have your lace doilies served their purpose? Don't rush to part with them! Let's inflate balloon IR white, find a brush and PVA, straighten the material on the surface and coat it generously. After an hour, the elegant lampshade is ready for use.
Cutlery can decorate a meal beyond just serving. Spoons gathered into a bun resemble a silver tulip. And connoisseurs of Kandinsky or Dali will appreciate the avant-garde cube constructed from knives and forks. Bon appetit!
An interesting effect in a children's room is created by small light screens in the form of a cartoon cloud. The light bulb located behind it dimly illuminates the walls without blinding the eyes. By adding some more funny clouds, we get a romantic sunset.
Several brightly glowing globes will dynamically enliven the space above the stairs. Oceans and continents will light your way - an original and charismatic solution with deep implications. Choose the right proportions for your unique installation and get charged with positivity.
Don't know what to do with the mismatched remains of the services? Drill holes in the cup and saucer, place the socket in the middle and connect with a hollow tie - just like in a regular lamp. White porcelain perfectly diffuses light - hang the composition above the coffee table and enjoy a fragrant drink.
A ball of yarn can be successfully used as a chandelier. Several skeins of thread, white balloon, electrical fittings and glue - we randomly wrap the base and spread it generously with astringent. Wait until it dries completely - and your unique masterpiece is ready. They cannot play football, but the product is quite reliable.
Is it possible to make a table lamp from beer cans? It turns out yes! Only we will need a lot of them - after all, we only use valves for opening. We knit a frame of the desired shape from rigid wire and begin to braid the base. It turns out something like shiny chain mail. Unfortunately, exact amount raw materials are unknown.
This charming lamp in the shape of a cute alien animal is very easy to make. Most labor-intensive process– cutting narrow paper wedges. We connect several wire rings together to get something like a sphere, and use tape to attach the prepared parts in layers. All!
An option with pronounced charisma will appeal to confirmed bachelors and lovers of noisy parties. Having seen the impressive installation above the table, guests will immediately understand what awaits them in the next couple of hours. Cheap and cheerful, but with soul...
What to do with endless plastic bottles? If you are tired of fighting them, we suggest you turn their myriad of them to your benefit, at least partially. Cut off the bottoms, and you will have a lot of small parts in your hands. Connect them randomly with threads - there are no restrictions on the shape.
As you know, a thing created with your own hands can become worthy decoration any interior. Moreover, the more such designer and cozy items, the more interesting and colorful the space looks. For each room of your house or apartment, you can create tabletops that will become an excellent decoration. Moreover, for this you can use available materials and very often those that are initially difficult to imagine in the role of this functional and necessary device.
Where to begin?
Of course, first you need to think about the design, but we will return to this issue a little later. In the meantime, let's decide how to make a table lamp from what we have on hand. We will use the following elements and devices:
The basis for the lamp (this can be a piece of plywood or a DVD);
The frame is from an old lampshade;
A tube (it can be anything);
Various adhesive compositions;
A piece of cable;
Decorations for the base;
Switch, plug, socket;
The material from which we will prepare the lampshade;
Aerosol paint.
Table lamp diagram
A classic table lamp consists of several parts. Firstly, this is the base, the column and In this capacity, it is quite possible to use a glass lampshade or a lampshade, for example, made of fabric. There is a switch that is located on the power cord or on the base itself, sometimes it is mounted on the base. Depending on the purpose of the lamp, it can have a different design:
- A classic lamp that is used to illuminate the workplace. The diffuser is here - glass shade or textile lampshade.
- The device is attached to the table with a clamp. The column of such a lamp is flexible, that is, you can tilt it as you like. A lampshade is an opaque bell that focuses light in one direction. A conventional or LED is used as a light source.
- A lamp with a dimmer is the ability to adjust the brightness of the light source.
We bring ideas to life
So, we have prepared the parts from which the simplest ones are made with our own hands. Now we take glue, base and tube and glue them together, for example, using paper or old newspaper. Yes, do not forget to make a hole in the base - the cord will then come out through it. Let the design dry, after which we begin to decorate our tube.
To do this, we use anything: beads, buttons, beads, bows, figurines from Kinder surprises and much, much more. Thanks to such original and at the same time simple decorations, your lamp will look very non-standard, which means there will be an opportunity to transform the interior. The very last task is to coat the lamp with paint. It is best to choose formulations that do not contain toxins, as well as those that dry quickly. After the device has dried, you can begin making the lampshade.
Lamp from an old vase - fresh ideas
To create with your own hands, it is not at all necessary to look for some design ideas or strive for effect. It’s enough just to take an old vase and make a lighting device based on it. This way you will immediately kill two birds with one stone: on the one hand, you will give new life old thing, and on the other hand, decorate your home with something unusual.
So, we will need the following components of the future device: an old vase, a socket from an old lamp with a holder, or a holder, for example, made from cork. A piece of polystyrene foam into which the reinforcement is inserted will also work as a base. It needs to be filled well epoxy resin, not forgetting to follow safety rules, since this composition emits harmful substances. A structure is created from the prepared materials and inserted into an old vase. Now all that’s left to do is make a lampshade.
Lampshade is the crowning glory
Probably, the basis for creating a lamp can be anything. But with the help of a lampshade you can change the appearance of the lighting fixture at least every day. In addition, this element is created easily and simply, and again from materials available at hand. The design can be done in a variety of style directions, but it is important that hand-made table lamps are in harmony with the surrounding space. Which method of creating a lampshade should you choose?
First of all, the most best option- make a lampshade from the same wallpaper that covers the room. To do this, we take the wallpaper and cut off a strip from it slightly wider than the width of the lampshade. Then you need to carefully glue it to the lampshade, being careful not to break it or wrinkle it. We give it time to dry, after which you can safely put the product on the lamp.
Secondly, the fabric lampshade is popular. It is very simple to make, and, if you want, you can always remove it and replace it with another variety. Such a lampshade is created according to the same scheme as given above.
All the best for children
As you already understood, to create a table lamp, you don’t have to be a generator of ideas and thoughts. It's enough just to show your imagination. Modern children's table lamps are distinguished by their bright design, but you can change their appearance somewhat and make them more interesting. For example, those who know how to handle fabric can make an original lampshade in patchwork style. In addition, this technique can be implemented in a slightly different way, for example, making a base for a lamp from children's toys - cubes, a puzzle, or decorating the lampshade with toys from Kinder Surprises.
For a girly version, you can use more romantic designs and decorative elements. For example, a lampshade richly decorated with satin ribbons, bows, beautiful buttons or interesting appliqué will definitely appeal to cheerful fashionistas.
Original designs
Now let's look at how unusual a table lamp can be. With your own hands (the photo confirms this) you can make it very, very catchy, effective and memorable. For example, if you have an old globe, then it can be easily adapted to fit an original lamp shape. By the way, you can safely give this to avid travelers - they will definitely appreciate it.
But needlewomen probably keep a huge number of balls of threads of the most different colors. You can knit a beautiful and bright cover and put it on the lampshade. Or you can simply complement the fabric dome with the help of original connected ornaments. Such a lamp will add coziness to the room and create an environment favorable for spending time.
Many will laugh, but for the sake of originality, almost anything can be used. For example, plastic utensils in the form of forks, cups, spoons, and umbrella sticks for cocktails. To create a custom lampshade, we will need a balloon onto which we will glue all this plastic and cheap stuff with glue. By the way, you can color it if you wish. acrylic compounds- this way your lamp will shine with new colors and will look very original!
What's the result?
Thus, there are a lot of ideas for creating a table lamp at home. Choose the method that suits you best in terms of style and constructive solution. After all fresh ideas in the interior - this is the easiest way to update it. This method is also profitable because you can create original lighting you can use whatever you have in your pantry.